Finding an optimal isolator arrangement for asymmetric structures using traditional conceptual design methods that can significantly minimize torsional response while ensuring efficient horizontal seismic isolation is...Finding an optimal isolator arrangement for asymmetric structures using traditional conceptual design methods that can significantly minimize torsional response while ensuring efficient horizontal seismic isolation is cumbersome and inefficient.Thus,this work develops a multi-objective optimization method to enhance the torsional resistance of asymmetric base-isolated structures.The primary objective is to simultaneously minimize the interstory rotation of the superstructure,the rotation of the isolation layer,and the interstory displacement of the superstructure without exceeding the isolator displacement limits.A fast non-dominated sorting genetic algorithm(NSGA-Ⅱ)is employed to satisfy this optimization objective.Subsequently,the isolator arrangement,encompassing both positions and categories,is optimized according to this multi-objective optimization method.Additionally,an optimization design platform is developed to streamline the design operation.This platform integrates the input of optimization parameters,the output of optimization results,the finite element analysis,and the multi-objective optimization method proposed herein.Finally,the application of this multi-objective optimization method and its associated platform are demonstrated on two asymmetric base-isolated structures of varying heights and plan configurations.The results indicate that the optimal isolator arrangement derived from the optimization method can further improve the control over the lateral and torsional responses of asymmetric base-isolated structures compared to conventional conceptual design methods.Notably,the interstory rotation of the optimal base-isolated structure is significantly reduced,constituting only approximately 33.7%of that observed in the original base-isolated structure.The proposed platform facilitates the automatic generation of the optimal design scheme for the isolators of asymmetric base-isolated structures,offering valuable insights and guidance for the burgeoning field of intelligent civil engineering design.展开更多
Based on NCEP/CFSR 0.5° reanalysis data and the best track data from the Japan Tokyo Typhoon Center,composite and comparative analyses demonstrate the asymmetrical structures of the temperature and humidity in tr...Based on NCEP/CFSR 0.5° reanalysis data and the best track data from the Japan Tokyo Typhoon Center,composite and comparative analyses demonstrate the asymmetrical structures of the temperature and humidity in tropical cyclones over the Western North Pacific and the South China Sea from 1979 to 2010.The results are shown as follows.(1) With intensifying tropical cyclones,the flow field tends to become gradually more axisymmetric;however,the asymmetry of the specific humidity in the outer regions is more obvious.(2) In general,tropical cyclones have a non-uniform,vertical, "double warm-core" structure.The "warm-cores" in the lower level of weak tropical cyclones and in the higher level of strong tropical cyclones are the stronger of the two.(3) The distribution area of a "warm-core" is enhanced with cyclone intensification and tends to become more axisymmetric.At 200 hPa,the "warm-core" of a weak cyclone has a weak anticyclone in the center,whereas that of a strong cyclone has a weak cyclone in the center.(4)The "wet-core" of a tropical cyclone is primarily located in the lower level(700-850 hPa).With the cyclone's intensification,the intensity of the "wet-core" increases and the scope of the 0.8 g kg^(-1) specific humidity anomaly tends to expand to higher levels.(5) With the cyclone's deepening,the pseudo-equivalent potential temperature at different levels in different regions increases.In addition,the largest warming rates at each intensity level in the different regions occur in the core area,followed in turn by the envelope and outer areas.展开更多
The structural characteristics of 2004 typhoon Aere's precipitation are analyzed using the high-resolution data from the Tropical Rainfall Measuring Mission(TRMM) of the National Aeronautics Space Administration(N...The structural characteristics of 2004 typhoon Aere's precipitation are analyzed using the high-resolution data from the Tropical Rainfall Measuring Mission(TRMM) of the National Aeronautics Space Administration(NASA).It is found that the typhoon's characteristics vary at different stages of its development.To analyze the asymmetric causation of precipitation distribution,data from the National Center for Environmental Prediction(NCEP) reanalysis are used to calculate the vertical integral of the water vapor flux vector.The results show that because of this process,along with the unique phenomenon of twin-typhoon circulation,the easterly air current of the typhoon's northern side and the southwesterly air current of its southern side play a joint role in transporting water vapor.Furthermore,its transport effects vary greatly at the different stages of development,showing the peculiarity of the water source for this typhoon process.The distributions of the typhoon convection area—characterized by heavy precipitation and a maximum-value area of the water vapor flux,as well as a strong ascending-motion area—differ at different stages of the typhoon's development.The non-uniform distribution of water vapor flux and the vertical motion bring about asymmetrical distribution of the typhoon precipitation.展开更多
We present a stable linear-cavity single longitudinal mode （SLM） erbium-doped silica fiber laser. It consists of four fiber Bragg gratings （FBGs） directly written in a section of photosensitive erbium-doped fiber ...We present a stable linear-cavity single longitudinal mode （SLM） erbium-doped silica fiber laser. It consists of four fiber Bragg gratings （FBGs） directly written in a section of photosensitive erbium-doped fiber （EDF） to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio （OSNR） of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer （OSA） for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.展开更多
Structured illumination microscopy(SIM)is a rapidly developing super-resolution technology.It has been widely used in various application fields of biomedicine due to its excellent two-and three-dimensional imaging ca...Structured illumination microscopy(SIM)is a rapidly developing super-resolution technology.It has been widely used in various application fields of biomedicine due to its excellent two-and three-dimensional imaging capabilities.Furthermore,faster three-dimensional imaging methods are required to help enable more research-oriented living cell imaging.In this paper,a fast and sensitive three-dimensional structured illumination microscopy based on asymmetric three-beam interference is proposed.An innovative time-series acquisition method is employed to halve the time required to obtain each raw image.A segmented half-wave plate as a substantial linear polarization modulation method is applied to the three-dimensional SIM system for the first time.Although it needs to acquire 21 raw images instead of 15 to reconstruct one super-resolution image,the SIM setup proposed in this paper is 30%faster than the traditional spatial light modulator-SIM(SLM-SIM)in imaging each super-resolution image.The related theoretical derivation,hardware system,and verification experiment are elaborated in this paper.The stable and fast 3D super-resolution imaging method proposed in this paper is of great significance to the research of organelle interaction,intercellular communication,and other biomedical fields.展开更多
This article is concerned with the extended homogeneous balance method for studying the abundant localized solution structure of the (2+1) dimensional asymmetric Nizhnik Novikov Veselov equation. A B a¨...This article is concerned with the extended homogeneous balance method for studying the abundant localized solution structure of the (2+1) dimensional asymmetric Nizhnik Novikov Veselov equation. A B a¨ cklund transformation was first obtained, and then the richness of the localized coherent structures was found, which was caused by the entrance of two variable separated arbitrary functions, in the model. For some special choices of the arbitrary functions, it is shown that the localized structures of the model may be dromions, lumps, and ring solitons.展开更多
An inter-story shear model of asymmetric base-isolated structures incorporating deformation of each isolation bearing was built, and a method to simultaneously simulate bi-directional near-fault and far-field ground m...An inter-story shear model of asymmetric base-isolated structures incorporating deformation of each isolation bearing was built, and a method to simultaneously simulate bi-directional near-fault and far-field ground motions was proposed. A comparative study on the dynamic responses of asymmetric base-isolated structures under near-fault and far-field ground motions were conducted to investigate the effects of eccentricity in the isolation system and in the superstructures, the ratio of the uncoupled torsional to lateral frequency of the superstructure and the pulse period of near-fault ground motions on the nonlinear seismic response of asymmetric base-isolated structures. Numerical results show that eccentricity in the isolation system makes asymmetric base-isolated structure more sensitive to near-fault ground motions, and the pulse period of near-fault ground motions plays an import role in governing the seismic responses of asymmetric base-isolated structures.展开更多
Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure...Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure were produced by the 3D printing technology.Through experimental test and finite element simulation,the deformation mechanism and energy absorption characteristics of the AR-RH structure and the S-RH structure with negative Poisson’s ratios at different impact velocities were compared.The experimental test and finite element simulation results show that the novel AR-RH structure with negative Poisson’s ratios has stronger energy absorption capacity than the S-RH structure,and it has been verified that the rotatability of AR-RH can indeed absorb energy.Furthermore,the degree of asymmetry of the AR-RH structure was discussed.展开更多
Dual-asymmetric poly（vinylidene fluoride） （PVDF） separators have been fabricated by thermally induced phase separation with dimethyl sulfone （DMSO2） and glycerol as mixed diluents. The separators have a porous b...Dual-asymmetric poly（vinylidene fluoride） （PVDF） separators have been fabricated by thermally induced phase separation with dimethyl sulfone （DMSO2） and glycerol as mixed diluents. The separators have a porous bulk with large interconnected pores （-1.0 μm） and two surfaces with small pores （-30 nm）. This dual-asymmetric porous structure endows the separators with higher electrolyte uptake amount and rapider uptake rate, as well as better electrolyte retention ability than the commercialized Celgard 2400. The separators even maintain their dimensional stability up to 160 ℃, at which temperature the surface pores close up, leading to a dramatic decrease of air permeability. The electrolyte filled separators also show high ion conductivity （1.72 mS.cm-1） at room temperature. Lithium iron phosphate （LiFePO4）/lithium （Li） cells using these separators display superior discharge capacity and better rate performance as compared with those from the commercialized ones. The results provide new insight into the design and development of separators for high-performance lithium ion batteries with enhanced safety.展开更多
In this paper, an asymmetric array structure of space laser communication receiver is proposed. This structure can greatly reduce alignment requirement, and lighten the signal strength jitter caused by atmospheric tur...In this paper, an asymmetric array structure of space laser communication receiver is proposed. This structure can greatly reduce alignment requirement, and lighten the signal strength jitter caused by atmospheric turbulence. A prototype of the proposed structure is fabricated and a 2.5 Mbit/s on-off keying(OOK) modulated demonstration link over 40 m free space is built. This asymmetric array structure can effectively collect optical signal while rotating in a window angle of ±17°, and the bit error ratio(BER) keeps zero.展开更多
According to the frequency-domain theory, we investigate the asymmetric structure of above-threshold ionization(ATI) spectrum of an atom in two-color elliptically polarized(EP) laser fields. When both laser fields are...According to the frequency-domain theory, we investigate the asymmetric structure of above-threshold ionization(ATI) spectrum of an atom in two-color elliptically polarized(EP) laser fields. When both laser fields are linearly polarized(LP), the spectrum shows that the multi-plateau structure is symmetric about the emitted angle of electron at π/2, while the spectrum becomes asymmetric and shifts rightwards with the increase of the EP degree of the IR laser field. Since the total ATI process is regarded as including direct ATI and the rescattering ATI, we analyze the spectrum structure of direct ATI and rescattering ATI separately. Using the saddle-point approximation, we find that for direct ATI, the fringes on the spectrum are mainly attributed to the fact that the ionization probability becomes very small when the direction of emitted electrons is perpendicular to the direction of the XUV laser polarization;while for the rescattering ATI, the interference fringes on the spectrum mainly come from the superposition of the waist structures on the spectra of all sub-channels.展开更多
A bulk nanostructured twinning-induced plasticity （TWIP） steel with high ductility and high strength was fabricated by cryogenic asymmetry-rolling （cryo-ASR） and subsequent recovery treatment. It was found that th...A bulk nanostructured twinning-induced plasticity （TWIP） steel with high ductility and high strength was fabricated by cryogenic asymmetry-rolling （cryo-ASR） and subsequent recovery treatment. It was found that the cryo-ASRed TWIP steels exhibit simultaneous improvements in the ductility, strength and work hardening. Typical microstructures of the cryo-ASR TWIP steel were characterized by shear bands and intensive mechanical nano-sized twins induced by cryogenic deformation. These mechanical nano-scale twins remain thermally stable during the subsequent recovery treatment. It is believed that the ductility enhancement and high work-hardening ability for the cryo-ASR TWIP steels should be mainly attributed to the high-densitv pre-existing nano-scale twins.展开更多
Using the barotropic volticity equation that contains forcing from diabatic heating with appropriate parameterization. a number of numerical experiments are conducted for the tropical cyclone that is initially symmetr...Using the barotropic volticity equation that contains forcing from diabatic heating with appropriate parameterization. a number of numerical experiments are conducted for the tropical cyclone that is initially symmetric The result shows that the diabatic heating has important effects on the asymmetric structure in addition to the roll of the β term and nonlinear advection term in its formation. It again confirms the conclusion that the diabatic heating is a possible mechanism responsible for such structures in the tropical cyclone.展开更多
Five prediction experiments are carried out with two typhoons in 1992 using a limited -arca primitiveequations and two-way interactive model in a movable ,nested mesh. The result indicates good agreementin terms of mo...Five prediction experiments are carried out with two typhoons in 1992 using a limited -arca primitiveequations and two-way interactive model in a movable ,nested mesh. The result indicates good agreementin terms of motion between the prediction and observation. Studying the asymmetric structure in the cas-es selected, a close link is uncovered between the temporal evolutions of the structure and the track of motion in a tropical cyclone. Understanding of real asymmetric structure will help to improve the skill offorecasting tropical cyclones.展开更多
（R）-4-Hydroxymethyl-2-thioxo thiazolidine as a new chiral catalyst in the asymmetric addition of diethylzinc to benzaldehyde was synthesized from （R）-4-hydroxymethyl-2-thioxo thiazolidine carboxylic acid and its c...（R）-4-Hydroxymethyl-2-thioxo thiazolidine as a new chiral catalyst in the asymmetric addition of diethylzinc to benzaldehyde was synthesized from （R）-4-hydroxymethyl-2-thioxo thiazolidine carboxylic acid and its crystal structure was determined by X-ray diffraction method. The compound was crystallized in the orthorhombic system, space group P212121 with unit cell dimensions a=0.67253（12） nm; b=0.89164（17） nm; c=1.06146（19） nm, volume 0.6365（2） nm^3; Z=4, calculated denisity 1.557 Mg/m^3; absorption coefficient 0.733 mm^-1; F（000）=312. The X-ray crystal structure analysis reveals that the compound has a thione group.展开更多
The primary purpose of this research is to improve the seismic response of a complex asymmetric tall structure using viscoelastic(VE) dampers. Asymmetric structures have detrimental effects on the seismic performance ...The primary purpose of this research is to improve the seismic response of a complex asymmetric tall structure using viscoelastic(VE) dampers. Asymmetric structures have detrimental effects on the seismic performance because such structures create abrupt changes in the stiffness or strength that may lead to undesirable stress concentrations at weak locations. Structural control devices are one of the effective ways to reduce seismic impacts, particularly in asymmetric structures. For passive vibration control of structures, VE dampers are considered among the most preferred devices for energy dissipation. Therefore, in this research, VE dampers are implemented at strategic locations in a realistic case study structure to increase the level of distributed damping without occupying significant architectural space and reducing earthquake vibrations in terms of story displacements(drifts) and other design forces. It has been concluded that the seismic response of the considered structure retrofitted with supplemental VE dampers corresponded well in controlling the displacement demands. Moreover, it has been demonstrated that seismic response in terms of interstory drifts was effectively mitigated with supplemental damping when added up to a certain level. Exceeding the supplemental damping from this level did not contribute to additional mitigation of the seismic response of the considered structure. In addition, it was found that the supplemental damping increased the total acceleration of the considered structure at all floor levels, which indicates that for irregular tall structures of this type, VE dampers were only a good retrofitting measure for earthquake induced interstory deformations and their use may not be suitable for acceleration sensitive structures. Overall, the research findings demonstrate how seismic hazards to these types of structures can be reduced by introducing additional damping into the structure.展开更多
The two-dimensional wake produced by a time-periodic pitching foil with the asymmetric geometry is investigated in the present work.Through numerically solving nonlinear Navier–Stokes equations,we discuss the relatio...The two-dimensional wake produced by a time-periodic pitching foil with the asymmetric geometry is investigated in the present work.Through numerically solving nonlinear Navier–Stokes equations,we discuss the relationship among the kinematics of the prescribed motion,the asymmetric parameter K ranged as-1≤K≤1,and the types of the wakes including the mP+nS wake,the B′enard–von K′arm′an wake,the reverse B′enard–von K′arm′an wake,and the deviated wake.Compared with previous studies,we reveal that the asymmetric geometry of a pitching foil directly affects the foil's wake structures.The numerical results show that the reverse B′enard–von K′arm′an wake is easily deviated at K〈0,while the symmetry-breaking of the reverse B′enard–von K′arm′an wake is delayed at K〉0.Through the vortex dynamic method,we understand that the initial velocity of the vortex affected by the foil's asymmetry plays a key role in the deviation of the reverse B′enard–von K′arm′an wake.Moreover,we provide a theoretical model to predict the wake deviation of the asymmetric foil.展开更多
A flexible asymmetric supercapacitor with high energy density was constructed by using a flexible substrate of carbonized silk-fabrics decorated with carbon nanotube, electroplating MnO2 nanosheets and dip-coating act...A flexible asymmetric supercapacitor with high energy density was constructed by using a flexible substrate of carbonized silk-fabrics decorated with carbon nanotube, electroplating MnO2 nanosheets and dip-coating activated carbon powders as the positive and the negative electrodes, respectively. By controlling the electroplating time, the MnO2 nanosheets can be self-assembled to honeycomb structure and showed excellent electrochemical performance in 1 mol/L Na2SO4 electrolyte with SC950-EP30 performing the best. It exhibited a high specific capacitance（1110.85 F/g at a current density of 1 A/g based on the mass of MnO2） and superior rate capability（77.44% capacity retention from 1 A/g to 10 A/g）.Thus, the optimal asymmetric device assembled with this material as positive electrode can deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.展开更多
Compound Co_3(o-HOC_6H_4S)_2(o-OC_6H_4S)_2(PEt_3)_3 was obtained by reaction of CoCl_2, o-HOC_6H_4SH(H_2mD)and PEt_3 in ethanol in the presence of NaOCH_3.The three Co atoms are triangularly arranged and asymmetricall...Compound Co_3(o-HOC_6H_4S)_2(o-OC_6H_4S)_2(PEt_3)_3 was obtained by reaction of CoCl_2, o-HOC_6H_4SH(H_2mD)and PEt_3 in ethanol in the presence of NaOCH_3.The three Co atoms are triangularly arranged and asymmetrically bridged by four S and one O atoms from the four H_2mp ligands and terminally ligated by one O and three P atoms.Two free hydroxyl groups form two internal hydrogen bonds with adjacent oxo donor atoms.展开更多
Advanced intensity measures(IMs)based on an inelastic deformation spectrum improved the evaluation of the median engineering demand parameters(EDPs)and reduced dispersion.In this regard,an optimized two-degreefreedom(...Advanced intensity measures(IMs)based on an inelastic deformation spectrum improved the evaluation of the median engineering demand parameters(EDPs)and reduced dispersion.In this regard,an optimized two-degreefreedom(2DOF)modal pushover-based scaling procedure(2DMPS)has been developed for a nonlinear dynamic analysis of asymmetric in-plan buildings.The 2DMPS procedure scales ground motions to approach close enough to a target value of the inelastic displacement of the first-mode inelastic 2DOF modal stick,extended for structures with significant contributions of higher modes.Further,4-,6-and 13-story RC SMRF buildings were selected for analyses using ground motion records scaled by the 2DMPS procedure,the modal pushover-based scaling method(MPS),and ASCE/SEI 7-16 scaling procedures.The median values of EDPs on scaled records closely matched the benchmark results.The bias in the EDP values due to the scaled records in every group regarding their median value was lower than the dispersion of the 21 unscaled records.These results generally demonstrate the accuracy and efficiency of the 2DMPS method.Additionally,the 2DOF modal stick’s inelastic response spectra are better suited for calculating seismic demands for one-way asymmetric-plan structures than the SDOF inelastic response spectra.展开更多
基金National Natural Science Foundation of China under Grant No.52278490。
文摘Finding an optimal isolator arrangement for asymmetric structures using traditional conceptual design methods that can significantly minimize torsional response while ensuring efficient horizontal seismic isolation is cumbersome and inefficient.Thus,this work develops a multi-objective optimization method to enhance the torsional resistance of asymmetric base-isolated structures.The primary objective is to simultaneously minimize the interstory rotation of the superstructure,the rotation of the isolation layer,and the interstory displacement of the superstructure without exceeding the isolator displacement limits.A fast non-dominated sorting genetic algorithm(NSGA-Ⅱ)is employed to satisfy this optimization objective.Subsequently,the isolator arrangement,encompassing both positions and categories,is optimized according to this multi-objective optimization method.Additionally,an optimization design platform is developed to streamline the design operation.This platform integrates the input of optimization parameters,the output of optimization results,the finite element analysis,and the multi-objective optimization method proposed herein.Finally,the application of this multi-objective optimization method and its associated platform are demonstrated on two asymmetric base-isolated structures of varying heights and plan configurations.The results indicate that the optimal isolator arrangement derived from the optimization method can further improve the control over the lateral and torsional responses of asymmetric base-isolated structures compared to conventional conceptual design methods.Notably,the interstory rotation of the optimal base-isolated structure is significantly reduced,constituting only approximately 33.7%of that observed in the original base-isolated structure.The proposed platform facilitates the automatic generation of the optimal design scheme for the isolators of asymmetric base-isolated structures,offering valuable insights and guidance for the burgeoning field of intelligent civil engineering design.
基金Major State Basic Research Program of China(2013CB430305)National Natural Science Foundation of China(41475060,41275067,41305049)Public Benefit Research Foundation of China(GYHY201406010)
文摘Based on NCEP/CFSR 0.5° reanalysis data and the best track data from the Japan Tokyo Typhoon Center,composite and comparative analyses demonstrate the asymmetrical structures of the temperature and humidity in tropical cyclones over the Western North Pacific and the South China Sea from 1979 to 2010.The results are shown as follows.(1) With intensifying tropical cyclones,the flow field tends to become gradually more axisymmetric;however,the asymmetry of the specific humidity in the outer regions is more obvious.(2) In general,tropical cyclones have a non-uniform,vertical, "double warm-core" structure.The "warm-cores" in the lower level of weak tropical cyclones and in the higher level of strong tropical cyclones are the stronger of the two.(3) The distribution area of a "warm-core" is enhanced with cyclone intensification and tends to become more axisymmetric.At 200 hPa,the "warm-core" of a weak cyclone has a weak anticyclone in the center,whereas that of a strong cyclone has a weak cyclone in the center.(4)The "wet-core" of a tropical cyclone is primarily located in the lower level(700-850 hPa).With the cyclone's intensification,the intensity of the "wet-core" increases and the scope of the 0.8 g kg^(-1) specific humidity anomaly tends to expand to higher levels.(5) With the cyclone's deepening,the pseudo-equivalent potential temperature at different levels in different regions increases.In addition,the largest warming rates at each intensity level in the different regions occur in the core area,followed in turn by the envelope and outer areas.
基金A key project of National Foundation of Natural Science (40533015)Foundation for Meteorological Research of Jiangsu Province (K200715)a project of Foundation for Fundamental Theoretic Research of Institute of Meteorology,PLA University of Science and Technology
文摘The structural characteristics of 2004 typhoon Aere's precipitation are analyzed using the high-resolution data from the Tropical Rainfall Measuring Mission(TRMM) of the National Aeronautics Space Administration(NASA).It is found that the typhoon's characteristics vary at different stages of its development.To analyze the asymmetric causation of precipitation distribution,data from the National Center for Environmental Prediction(NCEP) reanalysis are used to calculate the vertical integral of the water vapor flux vector.The results show that because of this process,along with the unique phenomenon of twin-typhoon circulation,the easterly air current of the typhoon's northern side and the southwesterly air current of its southern side play a joint role in transporting water vapor.Furthermore,its transport effects vary greatly at the different stages of development,showing the peculiarity of the water source for this typhoon process.The distributions of the typhoon convection area—characterized by heavy precipitation and a maximum-value area of the water vapor flux,as well as a strong ascending-motion area—differ at different stages of the typhoon's development.The non-uniform distribution of water vapor flux and the vertical motion bring about asymmetrical distribution of the typhoon precipitation.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61077069 and 61107094)the Innovation Foundation for Excellent Doctoral Candidates of Beijing Jiaotong University, China (Grant No. 2011YJS202)
文摘We present a stable linear-cavity single longitudinal mode （SLM） erbium-doped silica fiber laser. It consists of four fiber Bragg gratings （FBGs） directly written in a section of photosensitive erbium-doped fiber （EDF） to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio （OSNR） of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer （OSA） for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.
基金This work was funded by The National Key R&D Program of China(2016YFF0102000)Scientific Research and Equipment Development Project of CAS(YJKYYQ20180032 and YJKYYQ20190048)Major Innovative Research Team of Suzhou(ZXT2019007).
文摘Structured illumination microscopy(SIM)is a rapidly developing super-resolution technology.It has been widely used in various application fields of biomedicine due to its excellent two-and three-dimensional imaging capabilities.Furthermore,faster three-dimensional imaging methods are required to help enable more research-oriented living cell imaging.In this paper,a fast and sensitive three-dimensional structured illumination microscopy based on asymmetric three-beam interference is proposed.An innovative time-series acquisition method is employed to halve the time required to obtain each raw image.A segmented half-wave plate as a substantial linear polarization modulation method is applied to the three-dimensional SIM system for the first time.Although it needs to acquire 21 raw images instead of 15 to reconstruct one super-resolution image,the SIM setup proposed in this paper is 30%faster than the traditional spatial light modulator-SIM(SLM-SIM)in imaging each super-resolution image.The related theoretical derivation,hardware system,and verification experiment are elaborated in this paper.The stable and fast 3D super-resolution imaging method proposed in this paper is of great significance to the research of organelle interaction,intercellular communication,and other biomedical fields.
文摘This article is concerned with the extended homogeneous balance method for studying the abundant localized solution structure of the (2+1) dimensional asymmetric Nizhnik Novikov Veselov equation. A B a¨ cklund transformation was first obtained, and then the richness of the localized coherent structures was found, which was caused by the entrance of two variable separated arbitrary functions, in the model. For some special choices of the arbitrary functions, it is shown that the localized structures of the model may be dromions, lumps, and ring solitons.
基金The National Natural Science Foundation of China (No. 50778078)
文摘An inter-story shear model of asymmetric base-isolated structures incorporating deformation of each isolation bearing was built, and a method to simultaneously simulate bi-directional near-fault and far-field ground motions was proposed. A comparative study on the dynamic responses of asymmetric base-isolated structures under near-fault and far-field ground motions were conducted to investigate the effects of eccentricity in the isolation system and in the superstructures, the ratio of the uncoupled torsional to lateral frequency of the superstructure and the pulse period of near-fault ground motions on the nonlinear seismic response of asymmetric base-isolated structures. Numerical results show that eccentricity in the isolation system makes asymmetric base-isolated structure more sensitive to near-fault ground motions, and the pulse period of near-fault ground motions plays an import role in governing the seismic responses of asymmetric base-isolated structures.
基金This work is supported by the State Key for Strength and Vibration of Mechanical Structures of Xi’an Jiaotong University(No.SV2018-KF-32)the Natural Science Foundation of Guangdong Province of China(2020A1515011064).
文摘Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure were produced by the 3D printing technology.Through experimental test and finite element simulation,the deformation mechanism and energy absorption characteristics of the AR-RH structure and the S-RH structure with negative Poisson’s ratios at different impact velocities were compared.The experimental test and finite element simulation results show that the novel AR-RH structure with negative Poisson’s ratios has stronger energy absorption capacity than the S-RH structure,and it has been verified that the rotatability of AR-RH can indeed absorb energy.Furthermore,the degree of asymmetry of the AR-RH structure was discussed.
基金financially supported by the National Natural Science Foundation of China(Nos.21174124 and 21534009)
文摘Dual-asymmetric poly（vinylidene fluoride） （PVDF） separators have been fabricated by thermally induced phase separation with dimethyl sulfone （DMSO2） and glycerol as mixed diluents. The separators have a porous bulk with large interconnected pores （-1.0 μm） and two surfaces with small pores （-30 nm）. This dual-asymmetric porous structure endows the separators with higher electrolyte uptake amount and rapider uptake rate, as well as better electrolyte retention ability than the commercialized Celgard 2400. The separators even maintain their dimensional stability up to 160 ℃, at which temperature the surface pores close up, leading to a dramatic decrease of air permeability. The electrolyte filled separators also show high ion conductivity （1.72 mS.cm-1） at room temperature. Lithium iron phosphate （LiFePO4）/lithium （Li） cells using these separators display superior discharge capacity and better rate performance as compared with those from the commercialized ones. The results provide new insight into the design and development of separators for high-performance lithium ion batteries with enhanced safety.
基金supported by the National Natural Science Foundation of China (Nos.61674142 and 62041502)。
文摘In this paper, an asymmetric array structure of space laser communication receiver is proposed. This structure can greatly reduce alignment requirement, and lighten the signal strength jitter caused by atmospheric turbulence. A prototype of the proposed structure is fabricated and a 2.5 Mbit/s on-off keying(OOK) modulated demonstration link over 40 m free space is built. This asymmetric array structure can effectively collect optical signal while rotating in a window angle of ±17°, and the bit error ratio(BER) keeps zero.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11474348,11674198,11425414,and 11774411)
文摘According to the frequency-domain theory, we investigate the asymmetric structure of above-threshold ionization(ATI) spectrum of an atom in two-color elliptically polarized(EP) laser fields. When both laser fields are linearly polarized(LP), the spectrum shows that the multi-plateau structure is symmetric about the emitted angle of electron at π/2, while the spectrum becomes asymmetric and shifts rightwards with the increase of the EP degree of the IR laser field. Since the total ATI process is regarded as including direct ATI and the rescattering ATI, we analyze the spectrum structure of direct ATI and rescattering ATI separately. Using the saddle-point approximation, we find that for direct ATI, the fringes on the spectrum are mainly attributed to the fact that the ionization probability becomes very small when the direction of emitted electrons is perpendicular to the direction of the XUV laser polarization;while for the rescattering ATI, the interference fringes on the spectrum mainly come from the superposition of the waist structures on the spectra of all sub-channels.
基金financially supported by the Jiangxi Provincial Science and Technology Department(No.20151BDH80082)the China National Major Science and Technology Project(No.2014ZX07214-002)the financial support from China Postdoctoral Science Foundation(No.2015M581608)
文摘A bulk nanostructured twinning-induced plasticity （TWIP） steel with high ductility and high strength was fabricated by cryogenic asymmetry-rolling （cryo-ASR） and subsequent recovery treatment. It was found that the cryo-ASRed TWIP steels exhibit simultaneous improvements in the ductility, strength and work hardening. Typical microstructures of the cryo-ASR TWIP steel were characterized by shear bands and intensive mechanical nano-sized twins induced by cryogenic deformation. These mechanical nano-scale twins remain thermally stable during the subsequent recovery treatment. It is believed that the ductility enhancement and high work-hardening ability for the cryo-ASR TWIP steels should be mainly attributed to the high-densitv pre-existing nano-scale twins.
文摘Using the barotropic volticity equation that contains forcing from diabatic heating with appropriate parameterization. a number of numerical experiments are conducted for the tropical cyclone that is initially symmetric The result shows that the diabatic heating has important effects on the asymmetric structure in addition to the roll of the β term and nonlinear advection term in its formation. It again confirms the conclusion that the diabatic heating is a possible mechanism responsible for such structures in the tropical cyclone.
文摘Five prediction experiments are carried out with two typhoons in 1992 using a limited -arca primitiveequations and two-way interactive model in a movable ,nested mesh. The result indicates good agreementin terms of motion between the prediction and observation. Studying the asymmetric structure in the cas-es selected, a close link is uncovered between the temporal evolutions of the structure and the track of motion in a tropical cyclone. Understanding of real asymmetric structure will help to improve the skill offorecasting tropical cyclones.
文摘（R）-4-Hydroxymethyl-2-thioxo thiazolidine as a new chiral catalyst in the asymmetric addition of diethylzinc to benzaldehyde was synthesized from （R）-4-hydroxymethyl-2-thioxo thiazolidine carboxylic acid and its crystal structure was determined by X-ray diffraction method. The compound was crystallized in the orthorhombic system, space group P212121 with unit cell dimensions a=0.67253（12） nm; b=0.89164（17） nm; c=1.06146（19） nm, volume 0.6365（2） nm^3; Z=4, calculated denisity 1.557 Mg/m^3; absorption coefficient 0.733 mm^-1; F（000）=312. The X-ray crystal structure analysis reveals that the compound has a thione group.
基金Supported by:Ministry of Science and Technology of China under Grant No.2017YFC0703603National Natural Science Foundation of China under Grant No.51678322
文摘The primary purpose of this research is to improve the seismic response of a complex asymmetric tall structure using viscoelastic(VE) dampers. Asymmetric structures have detrimental effects on the seismic performance because such structures create abrupt changes in the stiffness or strength that may lead to undesirable stress concentrations at weak locations. Structural control devices are one of the effective ways to reduce seismic impacts, particularly in asymmetric structures. For passive vibration control of structures, VE dampers are considered among the most preferred devices for energy dissipation. Therefore, in this research, VE dampers are implemented at strategic locations in a realistic case study structure to increase the level of distributed damping without occupying significant architectural space and reducing earthquake vibrations in terms of story displacements(drifts) and other design forces. It has been concluded that the seismic response of the considered structure retrofitted with supplemental VE dampers corresponded well in controlling the displacement demands. Moreover, it has been demonstrated that seismic response in terms of interstory drifts was effectively mitigated with supplemental damping when added up to a certain level. Exceeding the supplemental damping from this level did not contribute to additional mitigation of the seismic response of the considered structure. In addition, it was found that the supplemental damping increased the total acceleration of the considered structure at all floor levels, which indicates that for irregular tall structures of this type, VE dampers were only a good retrofitting measure for earthquake induced interstory deformations and their use may not be suitable for acceleration sensitive structures. Overall, the research findings demonstrate how seismic hazards to these types of structures can be reduced by introducing additional damping into the structure.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11502210,51709229,51879220,51479170,and 61803306)the National Key Research and Development Program of China(Grant No.2016YFC0301300)Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2018JQ5092)
文摘The two-dimensional wake produced by a time-periodic pitching foil with the asymmetric geometry is investigated in the present work.Through numerically solving nonlinear Navier–Stokes equations,we discuss the relationship among the kinematics of the prescribed motion,the asymmetric parameter K ranged as-1≤K≤1,and the types of the wakes including the mP+nS wake,the B′enard–von K′arm′an wake,the reverse B′enard–von K′arm′an wake,and the deviated wake.Compared with previous studies,we reveal that the asymmetric geometry of a pitching foil directly affects the foil's wake structures.The numerical results show that the reverse B′enard–von K′arm′an wake is easily deviated at K〈0,while the symmetry-breaking of the reverse B′enard–von K′arm′an wake is delayed at K〉0.Through the vortex dynamic method,we understand that the initial velocity of the vortex affected by the foil's asymmetry plays a key role in the deviation of the reverse B′enard–von K′arm′an wake.Moreover,we provide a theoretical model to predict the wake deviation of the asymmetric foil.
基金financially supported by the National Natural Science Foundation of China(No.51672151)973 Program of China(No.2014CB932401)
文摘A flexible asymmetric supercapacitor with high energy density was constructed by using a flexible substrate of carbonized silk-fabrics decorated with carbon nanotube, electroplating MnO2 nanosheets and dip-coating activated carbon powders as the positive and the negative electrodes, respectively. By controlling the electroplating time, the MnO2 nanosheets can be self-assembled to honeycomb structure and showed excellent electrochemical performance in 1 mol/L Na2SO4 electrolyte with SC950-EP30 performing the best. It exhibited a high specific capacitance（1110.85 F/g at a current density of 1 A/g based on the mass of MnO2） and superior rate capability（77.44% capacity retention from 1 A/g to 10 A/g）.Thus, the optimal asymmetric device assembled with this material as positive electrode can deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.
文摘Compound Co_3(o-HOC_6H_4S)_2(o-OC_6H_4S)_2(PEt_3)_3 was obtained by reaction of CoCl_2, o-HOC_6H_4SH(H_2mD)and PEt_3 in ethanol in the presence of NaOCH_3.The three Co atoms are triangularly arranged and asymmetrically bridged by four S and one O atoms from the four H_2mp ligands and terminally ligated by one O and three P atoms.Two free hydroxyl groups form two internal hydrogen bonds with adjacent oxo donor atoms.
文摘Advanced intensity measures(IMs)based on an inelastic deformation spectrum improved the evaluation of the median engineering demand parameters(EDPs)and reduced dispersion.In this regard,an optimized two-degreefreedom(2DOF)modal pushover-based scaling procedure(2DMPS)has been developed for a nonlinear dynamic analysis of asymmetric in-plan buildings.The 2DMPS procedure scales ground motions to approach close enough to a target value of the inelastic displacement of the first-mode inelastic 2DOF modal stick,extended for structures with significant contributions of higher modes.Further,4-,6-and 13-story RC SMRF buildings were selected for analyses using ground motion records scaled by the 2DMPS procedure,the modal pushover-based scaling method(MPS),and ASCE/SEI 7-16 scaling procedures.The median values of EDPs on scaled records closely matched the benchmark results.The bias in the EDP values due to the scaled records in every group regarding their median value was lower than the dispersion of the 21 unscaled records.These results generally demonstrate the accuracy and efficiency of the 2DMPS method.Additionally,the 2DOF modal stick’s inelastic response spectra are better suited for calculating seismic demands for one-way asymmetric-plan structures than the SDOF inelastic response spectra.
