Continuing advancement in astronomy,space exploration,and scientific detection,has increased demand for infrared multi-band detection systems.Traditional three-band optical systems,designed to simultaneously image at ...Continuing advancement in astronomy,space exploration,and scientific detection,has increased demand for infrared multi-band detection systems.Traditional three-band optical systems,designed to simultaneously image at infrared short-wave,mid-wave,and long-wave bands typically rely on dispersive elements,leading to bulky sizes,complex system architectures,low efficiency,and challenges in rapid assembly.To overcome these obstacles,in combination with the latest third-generation infrared detectors,we propose a design for a compact and lightweight three-band optical system,with infrared capabilities in all three required bands.The core of this approach is an integrated design philosophy that emphasizes the high steepness of mirror surfaces.This design achieves uniform correction and optimization of chromatic aberration and off-axis aberration across the spectral range.We introduce a novel integration of optical and mechanical elements to replace traditional assembly,reducing manufacturing and assembly errors,and degrees of freedom,associated with high-power optical elements.Confirming the effectiveness through a combination of simulations and experimental comparisons,the measured mid-wave full-field transfer function exceeds 0.405 at 17 lp/mm,satisfying the imaging requirements of the system.The optical system is lightweight and compact,with a total mass under 408 g and a compact volume of justΦ112 mm×117 mm.This serves as a valuable reference for the engineering application of high-performance,compact multi-band infrared composite detection systems for astronomy and space exploration.展开更多
Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application ...Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application prospect in actual structural vibration control because of simple device and economical material.In view of the poor seismic behaviors of assembled frame structure connections,various energy dissipation devices are proposed to improve the seismic performance.The finite element numerical analysis method is adopted to analyze relevant energy dissipation structural parameters.The response spectrum of a 7-story assembled frame structure combined the ordinary steel support,ordinary viscoelastic damper,and viscoelastic damper with displacement amplification device is analyzed.The analysis results show that the mechanical behavior of assembled frame structure with ordinary steel supports are not significantly different from those without energy dissipation devices.The assembled frame structure with viscoelastic damper has better seismic performance and energy dissipation,especially for the viscoelastic damper with displacement amplification devices.The maximum value of inter-story displacement angle decreases by 32.24%;the maximum floor displacement decreases by 31.91%,and the base shear decreases by 13.62%compared with the assembled frame structures without energy dissipation devices.The results show that the seismic fortification ability of the structure is significantly improved,and the overall structure is more uniformly stressed.The damping structure with viscoelastic damper mainly reduces the dynamic response of the structure by increasing the damping coefficient,rather than by changing the natural vibration period of the structure.This paper provides an effective theoretical basis and reference for improving the energy dissipation system and the seismic performance of assembled frame structures.展开更多
Drug-eluting magnesium(Mg)alloy stents have a slower degradation rate and lower restenosis rate compared with uncoated stents,demonstrating good clinical efficacy.However,the release of anti-hyperplasia drugs from coa...Drug-eluting magnesium(Mg)alloy stents have a slower degradation rate and lower restenosis rate compared with uncoated stents,demonstrating good clinical efficacy.However,the release of anti-hyperplasia drugs from coatings delays endothelial tissue repair,thus leading to late stent thrombosis.To address these issues,a dual self-healed coating with various biological properties was fabricated on magnesium fluoride/polydopamine(MgF_(2)/PDA)-treated Mg alloys by spraying-assisted layer-by-layer(LBL)self-assembly of chitosan(CS),gallic acid(GA),and 3-aminobenzeneboronic acid-modified hyaluronic acid(HA-ABBA).The LBL coating,approximately 1.50μm thick,exhibited a uniform morphology with good adhesion strength(~1065 mN).The annual corrosion rate(Pi)of LBL samples was~1400 times slower than that of the Mg substrate,due to the physical barrier function provided by MgF_(2)/PDA layers and the dual self-healed ability of LBL layers.The rapid self-healing ability(with a healing period of~4 h under dynamic/static conditions)resulted from the synergistic interplay between the recombination of diverse chemical bonds within the LBL coating and the coordination of LBL-released GA with Mg2+,as corroborated by computer simulations.Compared with the drug-eluting coatings,the LBL sample demonstrated substantial advantages in anti-oxidation,anti-denaturation of fibrinogen,anti-platelet adhesion,anti-inflammation,anti-hyperplasia,and promoted-endothelialization.These benefits effectively address the limitations associated with drug-eluting coatings.展开更多
With the increasing miniaturisation and integration of electronic products and the increase of heat, it is necessary to design and introduce heat sinks and install fans. The volume of electronic components, especially...With the increasing miniaturisation and integration of electronic products and the increase of heat, it is necessary to design and introduce heat sinks and install fans. The volume of electronic components, especially the height, is very important for the structural and thermal design of electronic devices. This paper presents a design scheme of an online height measurement device based on laser triangulation and commercial charge coupled device(CCD). It analyzes the principles of electronic component height measurement, and expounds the composition and working principle of the laser measurement system. In addition, the commonly used methods to determine the center position are compared and analysed. These methods include circle fitting, gray centroid and extension method or Gaussian fitting. These methods usually lead to different results. The experimental results show that the fitting speed of the gray centroid is faster. The 3 D model of components is given through measurement, and the error factors affecting measurement are analysed.展开更多
With the improvement of Chinas urban construction level, the scale of the construction industry is constantly expanding, and the traditional production methods, production techniques and production technologies can no...With the improvement of Chinas urban construction level, the scale of the construction industry is constantly expanding, and the traditional production methods, production techniques and production technologies can no longer adapt to the development of cities. With the continuous development and application of building technology, prefabricated building components and BIM technology, the idea of green, low-carbon, environmental protection and sustainable development has become an inevitable choice to promote the transformation and upgrading of the construction industry. Relevant departments of the state, provinces and cities have issued a series of policies, which have promoted the research and development and engineering practice of prefabricated concrete construction technology, and promoted the application of BIM technology in the whole construction process. Therefore, the application of BIM technology in precast concrete structures has become a research hotspot, combining the two will bring greater economic and social benefits.展开更多
Because of their low electrical conductivity,sluggish ion diffusion,and poor stability,conventional electrode materials are not able to meet the growing demands of energy storage and portable devices.Graphene assemble...Because of their low electrical conductivity,sluggish ion diffusion,and poor stability,conventional electrode materials are not able to meet the growing demands of energy storage and portable devices.Graphene assembled films(GAFs)formed from graphene nanosheets have an ultrahigh conductivity,a unique 2D network structure,and exceptional mechanical strength,which give them the potential to solve these problems.However,a systematic understanding of GAFs as an advanced electrode material is lacking.This review focuses on the use of GAFs in electrochemistry,providing a comprehensive analysis of their synthesis methods,surface/structural characteristics,and physical properties,and thus understand their structure-property relationships.Their advantages in batteries,supercapacitors,and electrochemical sensors are systematically evaluated,with an emphasis on their excellent electrical conductivity,ion transport kinetics,and interfacial stability.The existing problems in these devices,such as chemical inertness and mechanical brittleness,are discussed and potential solutions are proposed,including defect engineering and hybrid structures.This review should deepen our mechanistic understanding of the use of GAFs in electrochemical systems and provide actionable strategies for developing stable,high-performance electrode materials.展开更多
The ability to control the preparation of one-dimensional(1D)porous carbon nanorods,especially during rapid polymerization,is key to their practical application.We report a method for synthesizing 1D porous carbon nan...The ability to control the preparation of one-dimensional(1D)porous carbon nanorods,especially during rapid polymerization,is key to their practical application.We report a method for synthesizing 1D porous carbon nanorods,characterized by the formation of rod-like mi-celles that are assembled from sodium palmitate and Pluronic F127,facilitated by protonated melamine,and subsequently converted into melamine-based N-doped polymer nanorods which were carbonized to produce the corres-ponding N-doped carbon nanorods.The specific capacitance of the supercapacitor used the as-pre-pared N-doped nanorods as electrode material in a three-electrode system was calculated to be 301.66 F g^(-1) at a current density of 0.2 A g^(-1),with an ultra-high specific surface area normalized capacitance of up to 67.07μF cm^(-2).The N-doping and their one-dimensionality give the nanorods a low internal resistance and good stability,making them well suited for fundamental studies and practical applications ranging from materials chemistry to electrochemical energy storage.展开更多
To address the challenges of insufficient visualization in the industrial robot assembly operation system and the limitation of visualizing only geometric attributes of physical properties,a method is proposed for con...To address the challenges of insufficient visualization in the industrial robot assembly operation system and the limitation of visualizing only geometric attributes of physical properties,a method is proposed for constructing an industrial robot assembly system based on virtual reality technology.Focusing on the shaft hole assembly,the mechanical characteristics of the industrial robot shaft hole assembly process are analyzed and a dynamic model is established for shaft hole assembly operations.The key elements of virtual assembly operations for industrial robots are summarized and a five-dimensional model is proposed for industrial robot virtual operations.Utilizing the Unity3D engine based on the 5-D model for industrial robot virtual operations,an industrial robot shaft hole assembly system is developed.This system enables virtual assembly operations,displays physical attributes,and provides valuable references for the research of virtual systems.展开更多
To address local concrete damage in joint areas at the footing of prefabricated assembled self-centering bridge piers(PASPs)in seismic design,a damage transfer configuration(DTC)was proposed,based on the bridge pier s...To address local concrete damage in joint areas at the footing of prefabricated assembled self-centering bridge piers(PASPs)in seismic design,a damage transfer configuration(DTC)was proposed,based on the bridge pier structure configuration and the mechanism of local damage formation.Integrating the DTC into the PASP,numerical models of a previous experimental reference PASP and a PASP with damage transfer configuration(DTPASP)were established using the finite element software ABAQUS with a concrete damage plasticity(CDP)model.The models were then compared with experimental results regarding damage distribution,hysteresis curves,energy dissipation capacity,the joint opening degree,and residual displacement.The findings indicate that the finite element model developed in this study can well reflect the experimental results of the reference PASP.The incorporation of the DTC proved to be beneficial in preserving structural integrity,bearing capacity,and the functionality of the core structure of bridge piers following an earthquake.Meanwhile,this addition did not exert a significant influence on the seismic behavior of the core structure of the bridge pier.展开更多
This study demonstrates the electrochemical reduction of carbon monoxide(COR)at high current densities in a zero-gap electrolyzer cell and cell stack.By systematically optimizing both the commercially available membra...This study demonstrates the electrochemical reduction of carbon monoxide(COR)at high current densities in a zero-gap electrolyzer cell and cell stack.By systematically optimizing both the commercially available membrane electrode assembly components(including binder content and gas diffusion layer)and the operating conditions,we could perform COR at current densities up to 1.4 A cm^(-2)with a maximum C2+selectivity of 90%.We demonstrated the scale-up to a 3×100 cm^(2)electrolyzer stack that can sustain stable operation at 1 A cm^(-2)for several hours without significant performance decay and with a total C2+selectivity of~80%and an ethylene selectivity of~40%.We provide critical insights into the holistic optimization of key system parameters,without using special catalysts or surface additives,which can pave the way for scalable and industrially viable COR processes.展开更多
In clinical practice,the irregular shapes of traumas pose a significant challenge in rapidly manufacturing personalized scaffolds.To address these challenges,inspired by LEGO■ bricks,this study proposed a novel conce...In clinical practice,the irregular shapes of traumas pose a significant challenge in rapidly manufacturing personalized scaffolds.To address these challenges,inspired by LEGO■ bricks,this study proposed a novel concept of modular scaffolds and developed an innovative system based on machine vision for their rapid and intelligent assembly tailored to defect shapes.Trapezoidal interfaces effectively connect standardized bone units based on magnesium-doped silicate calcium,ensuring high stability of the modular scaffolds,with compressive strength up to 135 MPa and bending strength up to 17 MPa.Through self-developed defect recognition and reconstruction algorithms,defect recognition and personalized assembly schemes for bone scaffolds can be achieved autonomously.Modular scaffolds seamlessly integrate with surrounding bone tissue,promoting new bone growth,with no apparent differences compared to fully 3D printed integral scaffolds in the skull and femur repair experiments.In summary,the adoption of modular scaffolds not only integrates personalization and standardization but also satisfies the optimal treatment window.展开更多
Multifunctional flexible sensors as wearable electronic systems have attracted considerable attention for mimicking human skin to sense ambient stimuli.However,sensors need to have high resolution,stability and sensit...Multifunctional flexible sensors as wearable electronic systems have attracted considerable attention for mimicking human skin to sense ambient stimuli.However,sensors need to have high resolution,stability and sensitivity to realize fully biomimetic skin.Here,an assembled and welded Ag/W composite nanowire flexible electrode was prepared for body motion monitoring and flexible heaters.This Ag/W composite nanowire flexible electrode has a high transmittance of 90.1%(at 121Ω·sq^(−1) sheet resistance)and a low sheet resistance of 27Ω·sq^(−1)(at 60.1%transmittance).Although the transparency of this electrode is not high,the fluctuation in relative resistance change rate at 10%strain is only 5%after 1000 tensile cycles.It can be employed to monitor human body motions,including bending of fingers,arms,wrists,and throat action.Meanwhile,the Ag/W nanowires composite film heater achieves a steady-state temperature of up to 100℃ at a constant voltage of 3.5 V and an instantaneous heating rate of up to 36.5℃·s^(−1).展开更多
Wheat-maize(WM)and wheat-soybean(WS)double-cropping rotation systems are predominant in the North China Plain,with implications for national agricultural output and sustainability.As rotation systems exert legacy effe...Wheat-maize(WM)and wheat-soybean(WS)double-cropping rotation systems are predominant in the North China Plain,with implications for national agricultural output and sustainability.As rotation systems exert legacy effects on soil health and crop productivity,the role of crop rotation in shaping the root-associated microbiome of the succeeding crops has emerged as a pivotal aspect of crop management research.Here,the effects of the preceding two cycles of WM and WS rotations on the recruitment and filtering of wheat root-associated bacterial communities across wheat developmental stages were investigated.Our results revealed that bacterial community diversity and composition were primarily influenced by compartment and developmental stage,while the preceding rotation systems had a slight but significant effect on wheat root-associated bacterial communities.The co-occurrence networks under WM were more complex in the wheat rhizosphere and rhizoplane,with the operational taxonomic units(OTUs)related to cellulolysis showing greater connectivity.The co-occurrence networks under WS were simple but stable in the rhizosphere and complex in the rhizoplane and endosphere,with the OTUs related to ureolysis and nitrogen fixation showing greater connectivity.While both stochastic and deterministic processes contributed to the assembly of wheat root-associated bacterial communities,the contributions of deterministic processes under WS were 19.4-38.5%higher than those under the WM rotation across the root-associated compartments,indicating the substantial impact of a soybean legacy effect on wheat root selection of microbes.Plant growthpromoting rhizobacteria with the potential to fix nitrogen,produce indole-3-acetic acid,and inhibit diseases such as Betaproteobacteriales,Azospirillales and Dyella sp.,were identified within the OTUs that were consistently enriched across all the wheat root-associated compartments and developmental stages,which were also important predictors of wheat yield.This study elucidates the role of crop rotation in modulating the dynamics of crop root-associated bacterial communities,and underscores the potential of targeted microbiome manipulation for optimizing wheat production and enhancing soil health.展开更多
This article provides an overview of the current development status of prestressed segmental precast and assembled piers,Emphasis was placed on analyzing the stress characteristics of bridge piers under impact.The con...This article provides an overview of the current development status of prestressed segmental precast and assembled piers,Emphasis was placed on analyzing the stress characteristics of bridge piers under impact.The concept of recoverable functional design and its application prospects were elaborated,and finally,the research on the impact resistance performance of prestressed segmental precast and assembled pierswas discussed.Research has shown that optimizing design and material selection can effectively enhance the impact resistance and structural durability of bridge piers.At the same time,the introduction of the concept of recoverable functionality provides new ideas for the rapid repair and functional recovery of bridge piers,which helps to improve the recovery efficiency of bridges after extreme events.Future research should focus on the evaluation methods of impact resistance performance,new connection technologies,in-depth application of recoverable functional design,a combination of impact simulation experiments and numerical analysis,and exploration of comprehensive disaster prevention and reduction strategies.These research results will also promote the further development and innovation of prefabricated assembly technology in bridge engineering,bringing new ideas and methods to the field of engineering construction.展开更多
To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnes...To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.展开更多
The computer numerical control（CNC） system is suited to control varied types of flexible fixtures in aircraft component manufacturing and assembly. The mechanisms and control requirements of flexible fixtures are pr...The computer numerical control（CNC） system is suited to control varied types of flexible fixtures in aircraft component manufacturing and assembly. The mechanisms and control requirements of flexible fixtures are presented and analyzed. The hardware and software architecture and implementation of CNC system are pro- posed. The flexible fixture mechanism is described using configuration parameters. According to the parameters, the CNC system automatically generates the control feature and the human machine interface （HMI） operation function. The CNC system is implemented in a flexible fixture for skin-strlnger assembly, and results show the effectiveness of the system.展开更多
Iris domestica,a perennial herb of the Iridaceae family,is widely recognized for its rich isoflavone content and broad therapeutic properties.To elucidate the biosynthetic pathway of these medicinally significant comp...Iris domestica,a perennial herb of the Iridaceae family,is widely recognized for its rich isoflavone content and broad therapeutic properties.To elucidate the biosynthetic pathway of these medicinally significant compounds,we constructed a haplotype-resolved genome assembly of this species.Transcriptomic and metabolomic analyses revealed tissue-specific accumulation of isoflavone,particularly in rhizomes and roots.Functional characterization identified two candidate isoflavone synthase genes,among which IdIFS was confirmed to promote the biosynthesis of key compounds tectorigenin and irisflorentin.The high-quality genome assembly presented here provides a foundational resource for further research into the evolution,secondary metabolite,and environmental adaptation of I.domestica.展开更多
An integrated system for assembly planning and design (INSAPS) is presented in which product data can be exchanged between assembly planning and assembly design on the basis of standard for exchange of product data mo...An integrated system for assembly planning and design (INSAPS) is presented in which product data can be exchanged between assembly planning and assembly design on the basis of standard for exchange of product data model (STEP). The system consists of CAD system, product modeling system, assembly planning system. The product model is organized according to the STEP, uses mostly the entities of IR (integrated resources) and partly self defined entities which is necessary for assembly planning. A simple method of assembly sequence generation is presented which is suitable for complex assembly planning. The generated assembly sequences are evaluated considering the optimization of total assembly time. The results of assembly planning are feedback to the stage of assembly design to improve design.展开更多
A preliminary feasibility study was set up for the HNBM standard system. By introducing the set theory and basic methods of the solid geometry and adopting the Verman three-dimensional structure ideology innovatively,...A preliminary feasibility study was set up for the HNBM standard system. By introducing the set theory and basic methods of the solid geometry and adopting the Verman three-dimensional structure ideology innovatively, the standards system of Hainan National Breeding and Multiplication (HNBM) was studied with the four-dimensional structure and integration by combining with the time dimension. The four-dimensional structure standards system will be useful for guiding the construction of the HNBM standards system, carrying on the division of labor and realizing the dynamic development of the standards system. The standards set of HNBM helps to computer programming and information management.展开更多
Proton exchange membrane fuel cells(PEMFCs)are considered as a promising renewable power source.However,the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied p...Proton exchange membrane fuel cells(PEMFCs)are considered as a promising renewable power source.However,the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction(ORR)kinetics even on state-of-the-art Pt catalyst.Octahedral PtNi nanoparticles(oct-PtNi NPs)with excellent ORR activity in a half-cell have been widely studied,while their performance in membrane electrode assembly(MEA)has much less reported.Herein,we investigated the MEA performance using the carbon supported oct-PtNi NPs(oct-PtNi/C)as the cathode catalyst.Under the mild acid washing condition,the surface Ni atoms of oct-PtNi/C were largely removed,and the performance of the MEA using the acid-leaching oct-PtNi/C(PNC-A)as the cathode catalyst was greatly improved.The maximum power density of the MEA reached 1.0 W·cm^(-2) with the cath-ode Pt loading of 0.2 mg·cm^(-2),which is 15%higher than that using Pt/C as the catalyst.After 30k cycles in the accelerated degradation test(ADT),the MEA using PNC-A as the catalyst showed a performance retention of 82%,higher than that of Pt/C(74%).The results reported here verify the possibility of using PNC-A as an advanced cathode catalyst in PEMFCs,thus enhancing the performance of PEMFCs while lowering the amount of expensive Pt.展开更多
基金National Natural Science Foundation of China(12073028,12473084).
文摘Continuing advancement in astronomy,space exploration,and scientific detection,has increased demand for infrared multi-band detection systems.Traditional three-band optical systems,designed to simultaneously image at infrared short-wave,mid-wave,and long-wave bands typically rely on dispersive elements,leading to bulky sizes,complex system architectures,low efficiency,and challenges in rapid assembly.To overcome these obstacles,in combination with the latest third-generation infrared detectors,we propose a design for a compact and lightweight three-band optical system,with infrared capabilities in all three required bands.The core of this approach is an integrated design philosophy that emphasizes the high steepness of mirror surfaces.This design achieves uniform correction and optimization of chromatic aberration and off-axis aberration across the spectral range.We introduce a novel integration of optical and mechanical elements to replace traditional assembly,reducing manufacturing and assembly errors,and degrees of freedom,associated with high-power optical elements.Confirming the effectiveness through a combination of simulations and experimental comparisons,the measured mid-wave full-field transfer function exceeds 0.405 at 17 lp/mm,satisfying the imaging requirements of the system.The optical system is lightweight and compact,with a total mass under 408 g and a compact volume of justΦ112 mm×117 mm.This serves as a valuable reference for the engineering application of high-performance,compact multi-band infrared composite detection systems for astronomy and space exploration.
基金supported by Foundation of Henan Educational Committee(20A560004,J.Z.)Foundation of Henan Science and Technology Project(182102311086,Y.W.)Foundation for University Key Teacher(YCJQNGGJS201901,J.Z.,YCJXSJSDTR201801,Y.W.,Henan University of Urban Construction).
文摘Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application prospect in actual structural vibration control because of simple device and economical material.In view of the poor seismic behaviors of assembled frame structure connections,various energy dissipation devices are proposed to improve the seismic performance.The finite element numerical analysis method is adopted to analyze relevant energy dissipation structural parameters.The response spectrum of a 7-story assembled frame structure combined the ordinary steel support,ordinary viscoelastic damper,and viscoelastic damper with displacement amplification device is analyzed.The analysis results show that the mechanical behavior of assembled frame structure with ordinary steel supports are not significantly different from those without energy dissipation devices.The assembled frame structure with viscoelastic damper has better seismic performance and energy dissipation,especially for the viscoelastic damper with displacement amplification devices.The maximum value of inter-story displacement angle decreases by 32.24%;the maximum floor displacement decreases by 31.91%,and the base shear decreases by 13.62%compared with the assembled frame structures without energy dissipation devices.The results show that the seismic fortification ability of the structure is significantly improved,and the overall structure is more uniformly stressed.The damping structure with viscoelastic damper mainly reduces the dynamic response of the structure by increasing the damping coefficient,rather than by changing the natural vibration period of the structure.This paper provides an effective theoretical basis and reference for improving the energy dissipation system and the seismic performance of assembled frame structures.
基金supported by the National Key Research and Development Program of China(No.2021YFC2400703)the Key Scientific and Technological Research Projects in Henan Province(Nos.232102311155 and 232102230106)Zhengzhou University Major Project Cultivation Special Project(No.125-32214076).
文摘Drug-eluting magnesium(Mg)alloy stents have a slower degradation rate and lower restenosis rate compared with uncoated stents,demonstrating good clinical efficacy.However,the release of anti-hyperplasia drugs from coatings delays endothelial tissue repair,thus leading to late stent thrombosis.To address these issues,a dual self-healed coating with various biological properties was fabricated on magnesium fluoride/polydopamine(MgF_(2)/PDA)-treated Mg alloys by spraying-assisted layer-by-layer(LBL)self-assembly of chitosan(CS),gallic acid(GA),and 3-aminobenzeneboronic acid-modified hyaluronic acid(HA-ABBA).The LBL coating,approximately 1.50μm thick,exhibited a uniform morphology with good adhesion strength(~1065 mN).The annual corrosion rate(Pi)of LBL samples was~1400 times slower than that of the Mg substrate,due to the physical barrier function provided by MgF_(2)/PDA layers and the dual self-healed ability of LBL layers.The rapid self-healing ability(with a healing period of~4 h under dynamic/static conditions)resulted from the synergistic interplay between the recombination of diverse chemical bonds within the LBL coating and the coordination of LBL-released GA with Mg2+,as corroborated by computer simulations.Compared with the drug-eluting coatings,the LBL sample demonstrated substantial advantages in anti-oxidation,anti-denaturation of fibrinogen,anti-platelet adhesion,anti-inflammation,anti-hyperplasia,and promoted-endothelialization.These benefits effectively address the limitations associated with drug-eluting coatings.
文摘With the increasing miniaturisation and integration of electronic products and the increase of heat, it is necessary to design and introduce heat sinks and install fans. The volume of electronic components, especially the height, is very important for the structural and thermal design of electronic devices. This paper presents a design scheme of an online height measurement device based on laser triangulation and commercial charge coupled device(CCD). It analyzes the principles of electronic component height measurement, and expounds the composition and working principle of the laser measurement system. In addition, the commonly used methods to determine the center position are compared and analysed. These methods include circle fitting, gray centroid and extension method or Gaussian fitting. These methods usually lead to different results. The experimental results show that the fitting speed of the gray centroid is faster. The 3 D model of components is given through measurement, and the error factors affecting measurement are analysed.
文摘With the improvement of Chinas urban construction level, the scale of the construction industry is constantly expanding, and the traditional production methods, production techniques and production technologies can no longer adapt to the development of cities. With the continuous development and application of building technology, prefabricated building components and BIM technology, the idea of green, low-carbon, environmental protection and sustainable development has become an inevitable choice to promote the transformation and upgrading of the construction industry. Relevant departments of the state, provinces and cities have issued a series of policies, which have promoted the research and development and engineering practice of prefabricated concrete construction technology, and promoted the application of BIM technology in the whole construction process. Therefore, the application of BIM technology in precast concrete structures has become a research hotspot, combining the two will bring greater economic and social benefits.
基金the National Natural Science Foundation of China(22279097)the Key R&D Program of Hubei Province(2023BAB103)the PhD Scientific Research and Innovation Foundation of The Education Department of Hainan Province Joint Project of Sanya Yazhou Bay Science and Technology City(HSPHDSRF-2024-03-022)。
文摘Because of their low electrical conductivity,sluggish ion diffusion,and poor stability,conventional electrode materials are not able to meet the growing demands of energy storage and portable devices.Graphene assembled films(GAFs)formed from graphene nanosheets have an ultrahigh conductivity,a unique 2D network structure,and exceptional mechanical strength,which give them the potential to solve these problems.However,a systematic understanding of GAFs as an advanced electrode material is lacking.This review focuses on the use of GAFs in electrochemistry,providing a comprehensive analysis of their synthesis methods,surface/structural characteristics,and physical properties,and thus understand their structure-property relationships.Their advantages in batteries,supercapacitors,and electrochemical sensors are systematically evaluated,with an emphasis on their excellent electrical conductivity,ion transport kinetics,and interfacial stability.The existing problems in these devices,such as chemical inertness and mechanical brittleness,are discussed and potential solutions are proposed,including defect engineering and hybrid structures.This review should deepen our mechanistic understanding of the use of GAFs in electrochemical systems and provide actionable strategies for developing stable,high-performance electrode materials.
文摘The ability to control the preparation of one-dimensional(1D)porous carbon nanorods,especially during rapid polymerization,is key to their practical application.We report a method for synthesizing 1D porous carbon nanorods,characterized by the formation of rod-like mi-celles that are assembled from sodium palmitate and Pluronic F127,facilitated by protonated melamine,and subsequently converted into melamine-based N-doped polymer nanorods which were carbonized to produce the corres-ponding N-doped carbon nanorods.The specific capacitance of the supercapacitor used the as-pre-pared N-doped nanorods as electrode material in a three-electrode system was calculated to be 301.66 F g^(-1) at a current density of 0.2 A g^(-1),with an ultra-high specific surface area normalized capacitance of up to 67.07μF cm^(-2).The N-doping and their one-dimensionality give the nanorods a low internal resistance and good stability,making them well suited for fundamental studies and practical applications ranging from materials chemistry to electrochemical energy storage.
基金Sponsored by the National Natural Science Foundation of China(Grant No.52005003)the Science and Technology Planning Project of Wuhu City(Grant No.2022jc41)。
文摘To address the challenges of insufficient visualization in the industrial robot assembly operation system and the limitation of visualizing only geometric attributes of physical properties,a method is proposed for constructing an industrial robot assembly system based on virtual reality technology.Focusing on the shaft hole assembly,the mechanical characteristics of the industrial robot shaft hole assembly process are analyzed and a dynamic model is established for shaft hole assembly operations.The key elements of virtual assembly operations for industrial robots are summarized and a five-dimensional model is proposed for industrial robot virtual operations.Utilizing the Unity3D engine based on the 5-D model for industrial robot virtual operations,an industrial robot shaft hole assembly system is developed.This system enables virtual assembly operations,displays physical attributes,and provides valuable references for the research of virtual systems.
基金National Natural Science Foundation of China under Grant Nos.51408359,52278527 and 52478536。
文摘To address local concrete damage in joint areas at the footing of prefabricated assembled self-centering bridge piers(PASPs)in seismic design,a damage transfer configuration(DTC)was proposed,based on the bridge pier structure configuration and the mechanism of local damage formation.Integrating the DTC into the PASP,numerical models of a previous experimental reference PASP and a PASP with damage transfer configuration(DTPASP)were established using the finite element software ABAQUS with a concrete damage plasticity(CDP)model.The models were then compared with experimental results regarding damage distribution,hysteresis curves,energy dissipation capacity,the joint opening degree,and residual displacement.The findings indicate that the finite element model developed in this study can well reflect the experimental results of the reference PASP.The incorporation of the DTC proved to be beneficial in preserving structural integrity,bearing capacity,and the functionality of the core structure of bridge piers following an earthquake.Meanwhile,this addition did not exert a significant influence on the seismic behavior of the core structure of the bridge pier.
基金Nemzeti Kutatási Fejlesztésiés Innovációs Hivatal,Grant/Award Number:RRF-2.3.1-21-2022-00009Horizon 2020 Framework Programme,Grant/Award Number:862453。
文摘This study demonstrates the electrochemical reduction of carbon monoxide(COR)at high current densities in a zero-gap electrolyzer cell and cell stack.By systematically optimizing both the commercially available membrane electrode assembly components(including binder content and gas diffusion layer)and the operating conditions,we could perform COR at current densities up to 1.4 A cm^(-2)with a maximum C2+selectivity of 90%.We demonstrated the scale-up to a 3×100 cm^(2)electrolyzer stack that can sustain stable operation at 1 A cm^(-2)for several hours without significant performance decay and with a total C2+selectivity of~80%and an ethylene selectivity of~40%.We provide critical insights into the holistic optimization of key system parameters,without using special catalysts or surface additives,which can pave the way for scalable and industrially viable COR processes.
基金supported by the Zhejiang Provincial Natural Science Foundation of China(LY22E050011)National Natural Science Foundation of China(T2121004,51805475)。
文摘In clinical practice,the irregular shapes of traumas pose a significant challenge in rapidly manufacturing personalized scaffolds.To address these challenges,inspired by LEGO■ bricks,this study proposed a novel concept of modular scaffolds and developed an innovative system based on machine vision for their rapid and intelligent assembly tailored to defect shapes.Trapezoidal interfaces effectively connect standardized bone units based on magnesium-doped silicate calcium,ensuring high stability of the modular scaffolds,with compressive strength up to 135 MPa and bending strength up to 17 MPa.Through self-developed defect recognition and reconstruction algorithms,defect recognition and personalized assembly schemes for bone scaffolds can be achieved autonomously.Modular scaffolds seamlessly integrate with surrounding bone tissue,promoting new bone growth,with no apparent differences compared to fully 3D printed integral scaffolds in the skull and femur repair experiments.In summary,the adoption of modular scaffolds not only integrates personalization and standardization but also satisfies the optimal treatment window.
基金supported by the National Natural Science Foundation of China(Nos.51905103,52275177).
文摘Multifunctional flexible sensors as wearable electronic systems have attracted considerable attention for mimicking human skin to sense ambient stimuli.However,sensors need to have high resolution,stability and sensitivity to realize fully biomimetic skin.Here,an assembled and welded Ag/W composite nanowire flexible electrode was prepared for body motion monitoring and flexible heaters.This Ag/W composite nanowire flexible electrode has a high transmittance of 90.1%(at 121Ω·sq^(−1) sheet resistance)and a low sheet resistance of 27Ω·sq^(−1)(at 60.1%transmittance).Although the transparency of this electrode is not high,the fluctuation in relative resistance change rate at 10%strain is only 5%after 1000 tensile cycles.It can be employed to monitor human body motions,including bending of fingers,arms,wrists,and throat action.Meanwhile,the Ag/W nanowires composite film heater achieves a steady-state temperature of up to 100℃ at a constant voltage of 3.5 V and an instantaneous heating rate of up to 36.5℃·s^(−1).
基金the National Natural Science Foundation of China(42107339)the China Agriculture Research System(CARS-04)。
文摘Wheat-maize(WM)and wheat-soybean(WS)double-cropping rotation systems are predominant in the North China Plain,with implications for national agricultural output and sustainability.As rotation systems exert legacy effects on soil health and crop productivity,the role of crop rotation in shaping the root-associated microbiome of the succeeding crops has emerged as a pivotal aspect of crop management research.Here,the effects of the preceding two cycles of WM and WS rotations on the recruitment and filtering of wheat root-associated bacterial communities across wheat developmental stages were investigated.Our results revealed that bacterial community diversity and composition were primarily influenced by compartment and developmental stage,while the preceding rotation systems had a slight but significant effect on wheat root-associated bacterial communities.The co-occurrence networks under WM were more complex in the wheat rhizosphere and rhizoplane,with the operational taxonomic units(OTUs)related to cellulolysis showing greater connectivity.The co-occurrence networks under WS were simple but stable in the rhizosphere and complex in the rhizoplane and endosphere,with the OTUs related to ureolysis and nitrogen fixation showing greater connectivity.While both stochastic and deterministic processes contributed to the assembly of wheat root-associated bacterial communities,the contributions of deterministic processes under WS were 19.4-38.5%higher than those under the WM rotation across the root-associated compartments,indicating the substantial impact of a soybean legacy effect on wheat root selection of microbes.Plant growthpromoting rhizobacteria with the potential to fix nitrogen,produce indole-3-acetic acid,and inhibit diseases such as Betaproteobacteriales,Azospirillales and Dyella sp.,were identified within the OTUs that were consistently enriched across all the wheat root-associated compartments and developmental stages,which were also important predictors of wheat yield.This study elucidates the role of crop rotation in modulating the dynamics of crop root-associated bacterial communities,and underscores the potential of targeted microbiome manipulation for optimizing wheat production and enhancing soil health.
基金supported by the Zhejiang Provincial Natural Science Foundation of China under Grant No.LTGG23E080001Scientific Research Foundation of Hangzhou City University under Grant Nos.X-202107 and X-202109Zhejiang Engineering Research Center of Intelligent Urban Infrastructure under Grant No.IUI2023-ZD-14.
文摘This article provides an overview of the current development status of prestressed segmental precast and assembled piers,Emphasis was placed on analyzing the stress characteristics of bridge piers under impact.The concept of recoverable functional design and its application prospects were elaborated,and finally,the research on the impact resistance performance of prestressed segmental precast and assembled pierswas discussed.Research has shown that optimizing design and material selection can effectively enhance the impact resistance and structural durability of bridge piers.At the same time,the introduction of the concept of recoverable functionality provides new ideas for the rapid repair and functional recovery of bridge piers,which helps to improve the recovery efficiency of bridges after extreme events.Future research should focus on the evaluation methods of impact resistance performance,new connection technologies,in-depth application of recoverable functional design,a combination of impact simulation experiments and numerical analysis,and exploration of comprehensive disaster prevention and reduction strategies.These research results will also promote the further development and innovation of prefabricated assembly technology in bridge engineering,bringing new ideas and methods to the field of engineering construction.
基金Project(2014TDJH104)supported by Shandong University of Science and Technology(SDUST)Research FundChina+3 种基金Project(2013RCJJ006)supported by Scientific Research Foundation of Shandong University of Science and Technology for Recruited TalentsChinaProject(BS2013CL009)supported by Scientific Research Foundation of Shandong for Outstanding Young ScientistChina
文摘To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.
文摘The computer numerical control（CNC） system is suited to control varied types of flexible fixtures in aircraft component manufacturing and assembly. The mechanisms and control requirements of flexible fixtures are presented and analyzed. The hardware and software architecture and implementation of CNC system are pro- posed. The flexible fixture mechanism is described using configuration parameters. According to the parameters, the CNC system automatically generates the control feature and the human machine interface （HMI） operation function. The CNC system is implemented in a flexible fixture for skin-strlnger assembly, and results show the effectiveness of the system.
文摘Iris domestica,a perennial herb of the Iridaceae family,is widely recognized for its rich isoflavone content and broad therapeutic properties.To elucidate the biosynthetic pathway of these medicinally significant compounds,we constructed a haplotype-resolved genome assembly of this species.Transcriptomic and metabolomic analyses revealed tissue-specific accumulation of isoflavone,particularly in rhizomes and roots.Functional characterization identified two candidate isoflavone synthase genes,among which IdIFS was confirmed to promote the biosynthesis of key compounds tectorigenin and irisflorentin.The high-quality genome assembly presented here provides a foundational resource for further research into the evolution,secondary metabolite,and environmental adaptation of I.domestica.
文摘An integrated system for assembly planning and design (INSAPS) is presented in which product data can be exchanged between assembly planning and assembly design on the basis of standard for exchange of product data model (STEP). The system consists of CAD system, product modeling system, assembly planning system. The product model is organized according to the STEP, uses mostly the entities of IR (integrated resources) and partly self defined entities which is necessary for assembly planning. A simple method of assembly sequence generation is presented which is suitable for complex assembly planning. The generated assembly sequences are evaluated considering the optimization of total assembly time. The results of assembly planning are feedback to the stage of assembly design to improve design.
文摘A preliminary feasibility study was set up for the HNBM standard system. By introducing the set theory and basic methods of the solid geometry and adopting the Verman three-dimensional structure ideology innovatively, the standards system of Hainan National Breeding and Multiplication (HNBM) was studied with the four-dimensional structure and integration by combining with the time dimension. The four-dimensional structure standards system will be useful for guiding the construction of the HNBM standards system, carrying on the division of labor and realizing the dynamic development of the standards system. The standards set of HNBM helps to computer programming and information management.
基金supported by grants from the Natural Science Foundation of China(22362031 and 21805121)the Science and Technology Project of Yunnan Province(2019FD137)。
文摘Proton exchange membrane fuel cells(PEMFCs)are considered as a promising renewable power source.However,the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction(ORR)kinetics even on state-of-the-art Pt catalyst.Octahedral PtNi nanoparticles(oct-PtNi NPs)with excellent ORR activity in a half-cell have been widely studied,while their performance in membrane electrode assembly(MEA)has much less reported.Herein,we investigated the MEA performance using the carbon supported oct-PtNi NPs(oct-PtNi/C)as the cathode catalyst.Under the mild acid washing condition,the surface Ni atoms of oct-PtNi/C were largely removed,and the performance of the MEA using the acid-leaching oct-PtNi/C(PNC-A)as the cathode catalyst was greatly improved.The maximum power density of the MEA reached 1.0 W·cm^(-2) with the cath-ode Pt loading of 0.2 mg·cm^(-2),which is 15%higher than that using Pt/C as the catalyst.After 30k cycles in the accelerated degradation test(ADT),the MEA using PNC-A as the catalyst showed a performance retention of 82%,higher than that of Pt/C(74%).The results reported here verify the possibility of using PNC-A as an advanced cathode catalyst in PEMFCs,thus enhancing the performance of PEMFCs while lowering the amount of expensive Pt.
