Poly(aryl ether keton e)(PAEK) films with different crystallinities were obtained by controlling the cooling rate,which were subjected to the absorption and desorption of methylene chloride(CH_(2)Cl_(2)).We employed a...Poly(aryl ether keton e)(PAEK) films with different crystallinities were obtained by controlling the cooling rate,which were subjected to the absorption and desorption of methylene chloride(CH_(2)Cl_(2)).We employed attenuated total reflection Fourier transform infrared(ATR-FTIR)spectroscopy analyses to investigate the diffusion behavior of CH_(2)Cl_(2) in PAEK films with different crystallinities.According to the Fickian diffusion model,the calculated diffu sion coefficients of CH_(2)Cl_(2) in PAEK films were observed to decrease with increasing crystallinity.The effect of CH_(2)Cl_(2)absorption and desorption on the mechanical properties of PAEK films with different crystallinity was further analyzed using tensile tests.The tensile tests exhibited that CH_(2)Cl_(2) has two concurrent effects:plasticization and solvent-induced crystallization.Differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(WXRD) techniques further confirmed solvent-induced crystallization behavior.The results would be beneficial to understand the solvent resistance of PAEK materials and consequently provide the practical application conditions of PAEK with a theoretical basis.展开更多
A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent vis...A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent viscosities ranged from 0.46 to 1.07 dL g^-1. The glass transition temperatures were in the range of 277-295℃, and the temperatures for 10% weight loss in nitrogen atmosphere were found between 495 and 527 ℃. The structures of these resultant polymers were confirmed by FT-IR and 1^H NMR. Moreover, the properties of poly（aryl ether nitrile）s including solubility and crystallinity were also studied.展开更多
Ion segregation is critically important for achieving high ion conductivity for anion exchange membranes(AEMs).Herein,a new bisphenol monomer bearing ten electron-rich phenyl groups was designed and polymerized with v...Ion segregation is critically important for achieving high ion conductivity for anion exchange membranes(AEMs).Herein,a new bisphenol monomer bearing ten electron-rich phenyl groups was designed and polymerized with various amounts of electron-deficient 4,4′-dihydroxydiphenylsulfone and 4,4′-difluorobenzophenone to yield dense and selective reaction sites for chloromethylation and quaternization.As the most challenging step,chloromethylation was optimized by tuning the reaction temperature,reaction time,and reactant ratios.Ion exchange capacity,water uptake,anion conductivity,mechanical stability,and alkaline stability of the resulting AEMs were characterized in detail.It is found that chloromethylation reaction needed to be carried out at low equivalent of chloromethylation agents to avoid undesirable crosslinking.The QA-PAEKS-20 sample with an IEC of 1.19 mmol·g^-1 exhibited a Cl^–conductivity of 11.2 mS·cm^-1 and a water uptake of 30.2%at80°C,which are promising for AEM applications.展开更多
Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one ...Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.展开更多
Novel blue light-emitting poly（aryl ether）s comprising of bipolar oligofluorene pendants as chromophores have been designed and synthesized, in which pyrimidine and arylamine moieties are utilized as the electron ac...Novel blue light-emitting poly（aryl ether）s comprising of bipolar oligofluorene pendants as chromophores have been designed and synthesized, in which pyrimidine and arylamine moieties are utilized as the electron acceptor and electron donor, respectively. Through varying n bridge length from monofluorene to bifluorene and end-cappers from hydrogen to carbazole and diphenylamine, the emission color of the resulting polymers covers from deep blue to greenish blue, and their HOMO and LUMO levels can be modulated to facilitate charge injection to improve the device performance. Polymer light- emitting diodes （PLEDs） are fabricated with the device structure of ITO/poly（3,4-ethylenedioxythiophene）：poly（styrene sulfonic acid） （PEDOT：PSS） （50 nm）/polymer （80 nm）/Ca （10 nm）/Al （200 nm）. Among these polymers, P2Cz5F-Py with bifluorene bridge and carbazole end-capper shows excellent trade-off between the efficiency and emission wavelength, having a peak luminous efficiency as high as 1.26 cd/A and Commission Internationale de L＇Eclairage （CIE） coordinates of （0.17,0.17）.展开更多
A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were...A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.展开更多
A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,...A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,4-naphthalenedicarboxylic acid with thionyl chloride. The Friedel-Crafts acylation of compound 1 with fluorobenzene afforded compound 2 in a 80% yield. The polycondensation of compound 2 with various bisphenols in tetramethylene sulfone(TMS) in the presence of excess potassium carbonate as a condensation reagent was carried out at 210 ℃ to quantitatively afford the corresponding poly(aryl ether ketone)s(compounds 3_8) containing 1,4-naphthalene moieties. Thermal analyses showed that the polymers have T g values ranging from 496 to 500 K and are thermally stable in air with initial mass loss above 500 ℃. These novel polymers exhibited an excellent solubility in organic solvents including NMP, DMAc, and chloroform, etc. In addition, the glass transition temperatures of these polymers increased and the polymers became insoluble in chloroform after treated at 260 ℃, indicating the occurrence of a thermal crosslinking reaction.展开更多
Novel poly（aryl ether sulfone ketone）s （PAESK） were synthesized from bisphenol A （BPA）, 9,9＇-bis（4-hydroxyphenyl） fluorene （BHPF）, 4,4＇-dichlorodiphenylsulfone （DCS） and 4,4＇-difluorobenzophenone （DFB...Novel poly（aryl ether sulfone ketone）s （PAESK） were synthesized from bisphenol A （BPA）, 9,9＇-bis（4-hydroxyphenyl） fluorene （BHPF）, 4,4＇-dichlorodiphenylsulfone （DCS） and 4,4＇-difluorobenzophenone （DFB） via nucleophilic substitution polymerization, which were subsequently used to fabricate ultrafiltration membrane by phase-inversion method for high temperature condensed water treatment. The obtained high molecular weight co-polymers with fluorene group with good solubility and good thermal stability, can be easily cast into flexible, white and non-transparent fiat films. The influence of molar ratio of BPA and BHPF on the properties of the prepared co-polymers and membranes was investigated in detail. SEM study of the morphology of the membranes indicated that the prepared membranes possessed homogeneous pores on the top surface and were sponge-like or finger-like in cross-section. Pure water flux of the membranes increased from 71.87 L·m-2.h-1 to 247.65 L·m-2.h-1, while the retention of BSA decreased slightly, and the water contact angle decreased from 82.1 ° to 55.6° with the PVP concentration from 0 wt% to 10 wt%. With increasing concentration of PVP, the mechanical properties of membranes decreased, while the thermal stability increased. The permeate flux measurement showed that the PAESK membrane had the potential for high temperature condensed water treatment.展开更多
A novel type of crosslinkable poly（aryl ether sulfone）（PAES） bearing an allyl pendant（PES-OAllyl） was synthesized by a grafting reaction of hydrophenyl-containing PAES（PES-OH） and allyl bromide. PES-OH was pre...A novel type of crosslinkable poly（aryl ether sulfone）（PAES） bearing an allyl pendant（PES-OAllyl） was synthesized by a grafting reaction of hydrophenyl-containing PAES（PES-OH） and allyl bromide. PES-OH was prepared by a demethylation reaction of a methoxyphenylated PAES（PES-OCH3） in the presence of pyridine/hydrochlo- ride. The PES-OCH3 was synthesized by an aromatic nucleophilic substitution of bis（4-chlorophenyl）sulfone and （p-methoxy）phenylhydroquinone. Both DSC and solubility investigation were used to study the crosslinking behavior of PES-OAllyl. After heat treatment, the glass transition temperature（Tg） value of PES-OAllyl sharply increased from 165 ℃ to 227 ℃. Meanwhile, PES-OAllyl changed from a soluble polymer to an insoluble thermoset. In addition, TGA（thermogravimetric analysis） result suggests that the thermal stability of the crosslinked product was improved. All the data prove that the crosslinked PES-OAllyl could be a potential solvent-resistance high-performance material.展开更多
A series of cardo poly（aryl ether sulfone） copolymers bearing pendent sulfonic acid groups （SPES-X） have been prepared by a facile chemical graft method. The structure was confirmed by 1H-NMR spectra. The side-cha...A series of cardo poly（aryl ether sulfone） copolymers bearing pendent sulfonic acid groups （SPES-X） have been prepared by a facile chemical graft method. The structure was confirmed by 1H-NMR spectra. The side-chain-type SPES-X membranes show significantly reduced swelling behavior and excellent mechanical properties as well as appropriate proton conductivity compared to the main-chain-type sulfonated polymers with similar ion exchange capacity （IEC） value. Moreover, they show methanol permeability in the range of 0.6 × 10^-7-5.7 × 10^-7 cmE/s which is lower than that of Nafion 117. All the results indicate that the SPES-Xmembranes are promising candidates for the direct methanol fuel cells.展开更多
A new poly(aryl ether ketone) containing biphenylphthalazinone moiety was prepared by the reaction of 4-(4-hydroxybiphenyl) phthalazine-1-one with 4, 4'-difluorobenzophenone. The monomer and the polymer were chara...A new poly(aryl ether ketone) containing biphenylphthalazinone moiety was prepared by the reaction of 4-(4-hydroxybiphenyl) phthalazine-1-one with 4, 4'-difluorobenzophenone. The monomer and the polymer were characterized by FT-IR and H-1-NMR. Some properties of this polymer were described.展开更多
A novel soluble poly(aryl ether ketone) was prepared by the reaction of 4-(3-phenyl-4-hydroxyphenyl)phthalazinone with 4,4'-difluorobenzophenone. The polymer was characterized by DSC, TGA and X-ray diffraction.
A novel heterocyclic poly (aryl ether ketone ketone) (PPEKK) containing cyclohexenering was prepared from 1-methyl-cyclohex-1-ene-4, 5 -diyl-bis(4-chlorophenyl methanone) and 4 (4-hydroxyphenyl)(2H) phthalazin-1-one. ...A novel heterocyclic poly (aryl ether ketone ketone) (PPEKK) containing cyclohexenering was prepared from 1-methyl-cyclohex-1-ene-4, 5 -diyl-bis(4-chlorophenyl methanone) and 4 (4-hydroxyphenyl)(2H) phthalazin-1-one. The polymer was characterized by FTIR, 1HNMR, DSC,TG and X-ray analysis.展开更多
Poly（ aryl ether ketone） copolymers containing 2,7-naphthylene and hydroquinone（HQ） moieties with various compositions were prepared by the reaction of 4,4＇-difluorobenzophenone（DFB） 2,7-naphthylene and hydroqu...Poly（ aryl ether ketone） copolymers containing 2,7-naphthylene and hydroquinone（HQ） moieties with various compositions were prepared by the reaction of 4,4＇-difluorobenzophenone（DFB） 2,7-naphthylene and hydroquinone in the presence of sodium carbonate and potassium carbonate （ 19： 1, mass ratio） in diphenyl sulfone （DPS）. The thermal analysis results of the copolymers show that the glass transition temperatures（Tgs） increase, while the melting temperatures（Tra） and tile 5.0% weight loss temperatures （ Td ） decrease with the increase of the 2,7-naphthalene moieties. For the copolymers synthesized at a molar fraction of 2,7-naphthalene in the difluoro monomers being over 0.30, no peaks corresponding to the cold crystallization temperature and the melting temperature could be detected, indicating that these copolymers are almost amorphous. The crystal structures of the copolymers with a molar fraction of 2,7-naphthalene being less than 0. 30 are rhombic.展开更多
A series of Poly（arly ether sulfone ether ketone）s containing pendant methyl groups were synthesized by the reaction of 4,4＇-[sulfonylbis （1,4-phenylene）dioxy] dibenzoyl chloride （SODBC） with 4,4＇- diphenoxy d...A series of Poly（arly ether sulfone ether ketone）s containing pendant methyl groups were synthesized by the reaction of 4,4＇-[sulfonylbis （1,4-phenylene）dioxy] dibenzoyl chloride （SODBC） with 4,4＇- diphenoxy diphenylsulfone （DPODPS）, 4,4＇- di（2-methylphenoxy） diphenylsulfone （o-Me-DPODPS）, 4,4＇- di（3-methylphenoxy） diphenylsulfone （m-Me-DPODPS）, 4,4＇- di （2,6-bimethylphenoxy） biphenylsulfone（o-Me2-DPODPS） respectively, in a mixture of 1,2-dichloroethane （DCE） and N-methylpyrrolidone （NMP）. These reactions were catalyzed by anhydrous aluminum chloride （AlCl）. The characteristic of copolymers were studied by means of advanced analytical techniques such as FT-IR,1H-NMR, DSC, TGA and WAXD. The results show glass transition temperature （Tg） in the range of 193-206℃, thermally stable in excess of 434℃ and excellent solubility in polar solvents. Methyl-substituted Poly（aryl ether sulfone ketone）s had higher glass transition temperatures, lower initial decomposition temperatures than the unsubstituted ones.展开更多
A general synthesis of diaryl ethers via coupling of aryl halides with substituted phenoxytrimethylsilane in the presence of TBAF is described. The protocol is simple and mild, and gives good to excellent yields.
The rheometries ARES rheometer was applied to determining the rheological behavior of a thermotropic liquid crystalline poly (aryl ether ketone). The viscosity of the material decreases with increasing temperature. re...The rheometries ARES rheometer was applied to determining the rheological behavior of a thermotropic liquid crystalline poly (aryl ether ketone). The viscosity of the material decreases with increasing temperature. reaching a minimum in the nematic state, then slightly increases with further raising the temperature in the biphase.展开更多
High performance polymers have received considerable attention over the past decade owing to their increased demands as replacements for metals or ceramics in automotive, aerospace, and microelectronic industries. Pol...High performance polymers have received considerable attention over the past decade owing to their increased demands as replacements for metals or ceramics in automotive, aerospace, and microelectronic industries. Poly（aryl ether ketone）s（PAEKs） are a class of important high-performance aromatic polymers with excellent mechanical properties, good solvent resistance, size-accuracy, electrical characteristics, and superior thermal stability. However,展开更多
Two poly（aryl ether）s containing naphthyl moieties were prepared from bis（3,5-dimethyl-4-hydroxyphenyl）naphthyl methane （monomer 1） via nucleophilic aromatic substitution polycondensation with bis（4-fluoropheny...Two poly（aryl ether）s containing naphthyl moieties were prepared from bis（3,5-dimethyl-4-hydroxyphenyl）naphthyl methane （monomer 1） via nucleophilic aromatic substitution polycondensation with bis（4-fluorophenyl） ketone and bis（4-fluorophenyl） sulfone. The structures of these polymers were confirmed by 1H NMR. The Mn values of the two polymers were 96,200 and 88,600, respectively. The polymers exhibited good thermal stabilities with 5% mass loss at T 〉 400 and high glass-transition temperature （Ts） of T 〉 250 ℃. Moreover, the resultant polymers were amorphous determined by wide angle X-ray diffraction （WAXD）. ？2009 Lei Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All fights reserved.展开更多
基金financially supported by the National Key R&D Program of China (No.2022YFB3709402)。
文摘Poly(aryl ether keton e)(PAEK) films with different crystallinities were obtained by controlling the cooling rate,which were subjected to the absorption and desorption of methylene chloride(CH_(2)Cl_(2)).We employed attenuated total reflection Fourier transform infrared(ATR-FTIR)spectroscopy analyses to investigate the diffusion behavior of CH_(2)Cl_(2) in PAEK films with different crystallinities.According to the Fickian diffusion model,the calculated diffu sion coefficients of CH_(2)Cl_(2) in PAEK films were observed to decrease with increasing crystallinity.The effect of CH_(2)Cl_(2)absorption and desorption on the mechanical properties of PAEK films with different crystallinity was further analyzed using tensile tests.The tensile tests exhibited that CH_(2)Cl_(2) has two concurrent effects:plasticization and solvent-induced crystallization.Differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(WXRD) techniques further confirmed solvent-induced crystallization behavior.The results would be beneficial to understand the solvent resistance of PAEK materials and consequently provide the practical application conditions of PAEK with a theoretical basis.
文摘A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent viscosities ranged from 0.46 to 1.07 dL g^-1. The glass transition temperatures were in the range of 277-295℃, and the temperatures for 10% weight loss in nitrogen atmosphere were found between 495 and 527 ℃. The structures of these resultant polymers were confirmed by FT-IR and 1^H NMR. Moreover, the properties of poly（aryl ether nitrile）s including solubility and crystallinity were also studied.
基金financially supported by the National Natural Science Foundation of China (Nos. 51873037 and 51503038)
文摘Ion segregation is critically important for achieving high ion conductivity for anion exchange membranes(AEMs).Herein,a new bisphenol monomer bearing ten electron-rich phenyl groups was designed and polymerized with various amounts of electron-deficient 4,4′-dihydroxydiphenylsulfone and 4,4′-difluorobenzophenone to yield dense and selective reaction sites for chloromethylation and quaternization.As the most challenging step,chloromethylation was optimized by tuning the reaction temperature,reaction time,and reactant ratios.Ion exchange capacity,water uptake,anion conductivity,mechanical stability,and alkaline stability of the resulting AEMs were characterized in detail.It is found that chloromethylation reaction needed to be carried out at low equivalent of chloromethylation agents to avoid undesirable crosslinking.The QA-PAEKS-20 sample with an IEC of 1.19 mmol·g^-1 exhibited a Cl^–conductivity of 11.2 mS·cm^-1 and a water uptake of 30.2%at80°C,which are promising for AEM applications.
文摘Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.
基金financially supported by the 973 Project(Nos.2009CB623601 and 2009CB930603)National Natural Science Foundation of China(No.21074130)Science Fund for Creative Research Groups(No.20921061)
文摘Novel blue light-emitting poly（aryl ether）s comprising of bipolar oligofluorene pendants as chromophores have been designed and synthesized, in which pyrimidine and arylamine moieties are utilized as the electron acceptor and electron donor, respectively. Through varying n bridge length from monofluorene to bifluorene and end-cappers from hydrogen to carbazole and diphenylamine, the emission color of the resulting polymers covers from deep blue to greenish blue, and their HOMO and LUMO levels can be modulated to facilitate charge injection to improve the device performance. Polymer light- emitting diodes （PLEDs） are fabricated with the device structure of ITO/poly（3,4-ethylenedioxythiophene）：poly（styrene sulfonic acid） （PEDOT：PSS） （50 nm）/polymer （80 nm）/Ca （10 nm）/Al （200 nm）. Among these polymers, P2Cz5F-Py with bifluorene bridge and carbazole end-capper shows excellent trade-off between the efficiency and emission wavelength, having a peak luminous efficiency as high as 1.26 cd/A and Commission Internationale de L＇Eclairage （CIE） coordinates of （0.17,0.17）.
文摘A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.
基金Supported by the National Natural Science Foundation of China(No.5 0 2 0 30 0 4 )
文摘A new monomer, 1,4-bis(4-fluorobenzoyl) naphthalene(compound 2) was synthesized via a two-step reaction. 1,4-Naphthalenedicarboxylic acid chloride(compound 1) was prepared by using the acyl chlorization reaction of 1,4-naphthalenedicarboxylic acid with thionyl chloride. The Friedel-Crafts acylation of compound 1 with fluorobenzene afforded compound 2 in a 80% yield. The polycondensation of compound 2 with various bisphenols in tetramethylene sulfone(TMS) in the presence of excess potassium carbonate as a condensation reagent was carried out at 210 ℃ to quantitatively afford the corresponding poly(aryl ether ketone)s(compounds 3_8) containing 1,4-naphthalene moieties. Thermal analyses showed that the polymers have T g values ranging from 496 to 500 K and are thermally stable in air with initial mass loss above 500 ℃. These novel polymers exhibited an excellent solubility in organic solvents including NMP, DMAc, and chloroform, etc. In addition, the glass transition temperatures of these polymers increased and the polymers became insoluble in chloroform after treated at 260 ℃, indicating the occurrence of a thermal crosslinking reaction.
基金financial support under Heilongjiang Postdoctoral Fund (No.LBH-Z09175)
文摘Novel poly（aryl ether sulfone ketone）s （PAESK） were synthesized from bisphenol A （BPA）, 9,9＇-bis（4-hydroxyphenyl） fluorene （BHPF）, 4,4＇-dichlorodiphenylsulfone （DCS） and 4,4＇-difluorobenzophenone （DFB） via nucleophilic substitution polymerization, which were subsequently used to fabricate ultrafiltration membrane by phase-inversion method for high temperature condensed water treatment. The obtained high molecular weight co-polymers with fluorene group with good solubility and good thermal stability, can be easily cast into flexible, white and non-transparent fiat films. The influence of molar ratio of BPA and BHPF on the properties of the prepared co-polymers and membranes was investigated in detail. SEM study of the morphology of the membranes indicated that the prepared membranes possessed homogeneous pores on the top surface and were sponge-like or finger-like in cross-section. Pure water flux of the membranes increased from 71.87 L·m-2.h-1 to 247.65 L·m-2.h-1, while the retention of BSA decreased slightly, and the water contact angle decreased from 82.1 ° to 55.6° with the PVP concentration from 0 wt% to 10 wt%. With increasing concentration of PVP, the mechanical properties of membranes decreased, while the thermal stability increased. The permeate flux measurement showed that the PAESK membrane had the potential for high temperature condensed water treatment.
基金Supported by the National Natural Science Foundation of China(No.50973040)the Science and Technology Development Plan of Jilin Province, China(No.20090322)
文摘A novel type of crosslinkable poly（aryl ether sulfone）（PAES） bearing an allyl pendant（PES-OAllyl） was synthesized by a grafting reaction of hydrophenyl-containing PAES（PES-OH） and allyl bromide. PES-OH was prepared by a demethylation reaction of a methoxyphenylated PAES（PES-OCH3） in the presence of pyridine/hydrochlo- ride. The PES-OCH3 was synthesized by an aromatic nucleophilic substitution of bis（4-chlorophenyl）sulfone and （p-methoxy）phenylhydroquinone. Both DSC and solubility investigation were used to study the crosslinking behavior of PES-OAllyl. After heat treatment, the glass transition temperature（Tg） value of PES-OAllyl sharply increased from 165 ℃ to 227 ℃. Meanwhile, PES-OAllyl changed from a soluble polymer to an insoluble thermoset. In addition, TGA（thermogravimetric analysis） result suggests that the thermal stability of the crosslinked product was improved. All the data prove that the crosslinked PES-OAllyl could be a potential solvent-resistance high-performance material.
基金financially supported by the National Natural Science Foundation of China(No.51203151)the Program of Jilin Education Department(No.93201201)
文摘A series of cardo poly（aryl ether sulfone） copolymers bearing pendent sulfonic acid groups （SPES-X） have been prepared by a facile chemical graft method. The structure was confirmed by 1H-NMR spectra. The side-chain-type SPES-X membranes show significantly reduced swelling behavior and excellent mechanical properties as well as appropriate proton conductivity compared to the main-chain-type sulfonated polymers with similar ion exchange capacity （IEC） value. Moreover, they show methanol permeability in the range of 0.6 × 10^-7-5.7 × 10^-7 cmE/s which is lower than that of Nafion 117. All the results indicate that the SPES-Xmembranes are promising candidates for the direct methanol fuel cells.
基金This work was supported by the National Natural Science Foundation of China.
文摘A new poly(aryl ether ketone) containing biphenylphthalazinone moiety was prepared by the reaction of 4-(4-hydroxybiphenyl) phthalazine-1-one with 4, 4'-difluorobenzophenone. The monomer and the polymer were characterized by FT-IR and H-1-NMR. Some properties of this polymer were described.
基金This work was supported by the National Natural Science Foundation.
文摘A novel soluble poly(aryl ether ketone) was prepared by the reaction of 4-(3-phenyl-4-hydroxyphenyl)phthalazinone with 4,4'-difluorobenzophenone. The polymer was characterized by DSC, TGA and X-ray diffraction.
文摘A novel heterocyclic poly (aryl ether ketone ketone) (PPEKK) containing cyclohexenering was prepared from 1-methyl-cyclohex-1-ene-4, 5 -diyl-bis(4-chlorophenyl methanone) and 4 (4-hydroxyphenyl)(2H) phthalazin-1-one. The polymer was characterized by FTIR, 1HNMR, DSC,TG and X-ray analysis.
文摘Poly（ aryl ether ketone） copolymers containing 2,7-naphthylene and hydroquinone（HQ） moieties with various compositions were prepared by the reaction of 4,4＇-difluorobenzophenone（DFB） 2,7-naphthylene and hydroquinone in the presence of sodium carbonate and potassium carbonate （ 19： 1, mass ratio） in diphenyl sulfone （DPS）. The thermal analysis results of the copolymers show that the glass transition temperatures（Tgs） increase, while the melting temperatures（Tra） and tile 5.0% weight loss temperatures （ Td ） decrease with the increase of the 2,7-naphthalene moieties. For the copolymers synthesized at a molar fraction of 2,7-naphthalene in the difluoro monomers being over 0.30, no peaks corresponding to the cold crystallization temperature and the melting temperature could be detected, indicating that these copolymers are almost amorphous. The crystal structures of the copolymers with a molar fraction of 2,7-naphthalene being less than 0. 30 are rhombic.
基金This work was supported by National Science Foundation of China （No. 20264001 ）, National Science Foundation of Jiangxi Province, Innovation Fund for Technology Based Firms of China （No. 06C26213601342）.
文摘A series of Poly（arly ether sulfone ether ketone）s containing pendant methyl groups were synthesized by the reaction of 4,4＇-[sulfonylbis （1,4-phenylene）dioxy] dibenzoyl chloride （SODBC） with 4,4＇- diphenoxy diphenylsulfone （DPODPS）, 4,4＇- di（2-methylphenoxy） diphenylsulfone （o-Me-DPODPS）, 4,4＇- di（3-methylphenoxy） diphenylsulfone （m-Me-DPODPS）, 4,4＇- di （2,6-bimethylphenoxy） biphenylsulfone（o-Me2-DPODPS） respectively, in a mixture of 1,2-dichloroethane （DCE） and N-methylpyrrolidone （NMP）. These reactions were catalyzed by anhydrous aluminum chloride （AlCl）. The characteristic of copolymers were studied by means of advanced analytical techniques such as FT-IR,1H-NMR, DSC, TGA and WAXD. The results show glass transition temperature （Tg） in the range of 193-206℃, thermally stable in excess of 434℃ and excellent solubility in polar solvents. Methyl-substituted Poly（aryl ether sulfone ketone）s had higher glass transition temperatures, lower initial decomposition temperatures than the unsubstituted ones.
文摘A general synthesis of diaryl ethers via coupling of aryl halides with substituted phenoxytrimethylsilane in the presence of TBAF is described. The protocol is simple and mild, and gives good to excellent yields.
基金the National Advanced Materials Committee of China (NAMCC) is gratefully acknowledged.
文摘The rheometries ARES rheometer was applied to determining the rheological behavior of a thermotropic liquid crystalline poly (aryl ether ketone). The viscosity of the material decreases with increasing temperature. reaching a minimum in the nematic state, then slightly increases with further raising the temperature in the biphase.
基金Supported by the National High Technology Research and Development Program of China(No.2006AA03Z543).
文摘High performance polymers have received considerable attention over the past decade owing to their increased demands as replacements for metals or ceramics in automotive, aerospace, and microelectronic industries. Poly（aryl ether ketone）s（PAEKs） are a class of important high-performance aromatic polymers with excellent mechanical properties, good solvent resistance, size-accuracy, electrical characteristics, and superior thermal stability. However,
基金supported by Natural Science Foundation of Guangdong Province(No.7301357)Science and Technology Projects of Shenzhen City(No.200724).
文摘Two poly（aryl ether）s containing naphthyl moieties were prepared from bis（3,5-dimethyl-4-hydroxyphenyl）naphthyl methane （monomer 1） via nucleophilic aromatic substitution polycondensation with bis（4-fluorophenyl） ketone and bis（4-fluorophenyl） sulfone. The structures of these polymers were confirmed by 1H NMR. The Mn values of the two polymers were 96,200 and 88,600, respectively. The polymers exhibited good thermal stabilities with 5% mass loss at T 〉 400 and high glass-transition temperature （Ts） of T 〉 250 ℃. Moreover, the resultant polymers were amorphous determined by wide angle X-ray diffraction （WAXD）. ？2009 Lei Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All fights reserved.
