This study examines the structural responses of a novel articulated foundation wind turbine with compliant structural design under offshore winds,waves,and seismic events.A numerical simulation analysis framework,ADRT...This study examines the structural responses of a novel articulated foundation wind turbine with compliant structural design under offshore winds,waves,and seismic events.A numerical simulation analysis framework,ADRT(Articulated Foundation Offshore Wind Turbine Dynamic Analysis and Response Prediction Tool),has been developed and validated through benchmark studies with established numerical tools,demonstrating strong correlation.The research conducts dynamic response analysis of the Articulated Foundation Offshore Wind Turbine(AFOWT)system under various seismic scenarios.Analysis reveals that response amplitude increases proportionally with seismic intensity.When wind and seismic forces act simultaneously,the system's response amplitude perpendicular to the rotor plane decreases compared with isolated seismic action,attributed to aerodynamic damping effects,except for blade deformation response.During emergency braking shutdown operations triggered by seismic excitation,the structural seismic response exceeds design safety thresholds during the shutdown feathering process,indicating that emergency shutdown procedures do not effectively mitigate the system's structural response.展开更多
The accuracy of an articulated torque analysis influences the comprehensive performances of heavy-duty multi-legged robots. Currently, the extremal estimation method and some complex methods are employed to calculate ...The accuracy of an articulated torque analysis influences the comprehensive performances of heavy-duty multi-legged robots. Currently, the extremal estimation method and some complex methods are employed to calculate the articulated torques, which results in a large safety margin or a large number of calculations. To quickly obtain accurate articulated torques, an analysis method for the articulated torque is presented for an electrically driven heavy-duty six-legged robot. First, the rearmost leg that experiences the maximum normal contact force is confirmed when the robot transits a slope. Based on the ant-type and crab-type tripod gaits, the formulas of classical mechanics and MATLAB software are employed to theoretically analyze the relevant static torques of the joints. With the changes in the joint angles for the abductor joint, hip joint, and knee joint, variable tendency charts and extreme curves are obtained for the static articulated torques. Meanwhile, the maximum static articulated torques and the corresponding poses of the robot are also obtained. According to the poses of the robot under the maximum static articulated torques, ADAMS software is used to carry out a static simulation analysis. Based on the relevant simulation curves of the articulated torques, the maximum static articulated torques are acquired. A comparative analysis of the maximum static articulated torques shows that the theoretical calculation values are higher than the static simulation values, and the maximum error value is approximately 10%. The proposed method lays a foundation for quickly determining accurate articulated torques to develop heavy-duty six-legged robots.展开更多
This paper designs a novel controller to improve the path-tracking performance of articulated dump truck(ADT). By combining linear quadratic regulator(LQR) with genetic algorithm(GA), the designed controller is used t...This paper designs a novel controller to improve the path-tracking performance of articulated dump truck(ADT). By combining linear quadratic regulator(LQR) with genetic algorithm(GA), the designed controller is used to control linear and angular velocities on the midpoint of the front frame. The novel controller based on the error dynamics model is eventually realized to track the path high-precisely with constant speed. The results of simulation and experiment show that the LQR-GA controller has a better tracking performance than the existing methods under a low speed of 3 m/s. In this paper, kinematics model and simulation control models based on co-simulation of ADAMS and Matlab/Simulink are established to verify the proposed strategy. In addition, a real vehicle experiment is designed to further more correctness of the conclusion. With the proposed controller and considering the steering model in the simulation, the control performance is improved and matches the actual situation better. The research results contribute to the development of automation of ADT.展开更多
In general, the orientation interpolation of industrial robots has been done based on Euler angle system which can result in singular point （so-called Gimbal Lock）. However, quaternion interpolation has the advantag...In general, the orientation interpolation of industrial robots has been done based on Euler angle system which can result in singular point （so-called Gimbal Lock）. However, quaternion interpolation has the advantage of natural （specifically smooth） orientation interpolation without Gimbal Lock. This work presents the application of quatemion interpolation, specifically Spherical Linear IntERPolation （SLERP）, to the orientation control of the 6-axis articulated robot （RS2） using LabVIEW and RecurDyn. For the comparison of SLERP with linear Euler interpolation in the view of smooth movement （profile） of joint angles （torques）, the two methods are dynamically simulated on RS2 by using both LabVIEW and RecurDyn. Finally, our original work, specifically the implementation of SLERP and linear Euler interpolation on the actual robot, i.e. RS2, is done using LabVIEW motion control tool kit. The SLERP orientation control is shown to be effective in terms of smooth joint motion and torque when compared to a conventional （linear） Euler interpolation.展开更多
The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable...The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable calibration parameters. To compensate for the deficiency of one measurement model, the multiple measurement models are built by the Denavit-Hartenberg＇s notation, the homemade standard rod components are used as a calibration tool and the Levenberg-Marquardt calibration algorithm is applied to solve the structural parameters in the measurement models. During the tests of multiple measurement models, the sample areas are selected in two situations. It is found that the measurement errors＇ sigma value（0.083 4 ram） dealt with one measurement model is nearly two times larger than that of the multiple measurement models（0.043 1 ram） in the same sample area. While in the different sample area, the measurement errors＇ sigma value（0.054 0 ram） dealt with the multiple measurement models is about 40% of one measurement model（0.137 3 mm）. The preliminary results suggest that the measurement accuracy of AACMM dealt with multiple measurement models is superior to the accuracy of the existing machine with one measurement model. This paper proposes the multiple measurement models to improve the measurement accuracy of AACMM without increasing any hardware cost.展开更多
The requirements of vehicle dynamic stability control are higher than ever as the significant increase of electric drive articulated vehicle speed. According to the construction features of articulated dumping truck a...The requirements of vehicle dynamic stability control are higher than ever as the significant increase of electric drive articulated vehicle speed. According to the construction features of articulated dumping truck and nonlinear characteristics of moving vehicles,nonlinear observer of vehicle status is designed to strength robustness of dynamic control system in this paper. A 4-degree-of-freedom nonlinear dynamic model of articulated electric drive vehicle is built as reference model to estimate the state of the articulated vehicle. And by adopting Unscented Kalman Filter( UKF) algorithm,a series of state parameters such as longitudinal velocities of front and rear frames,yaw rate and side-slip angle are estimated. During the test of 60 t articulated electric drive vehicle,2 inertial navigation modules are installed in the front frame and rear frame respectively and the speed of each electric drive wheel is obtained simultaneously. As the test results suggest,in various working conditions,the algorithm based on UKF is able to accurately estimate the state parameters of articulated vehicle with the estimated error less than 5%. The proposed method is justified to be the theoretical basis and application guidance for articulated vehicle stability control.展开更多
Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control.Owing to increasing structural complexity of recent products,meas...Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control.Owing to increasing structural complexity of recent products,measurements from multiple directions are typically required in current scanning techniques.Specifically,the plane structured light can be applied to measure one area of a part at a time,with an additional algorithm required to merge the collected data of each area.Alternatively,the line structured light sensor integrated on CNC machines or CMMs could also realize multi-view measurement.However,the system needs to be repeatedly calibrated at each new direction.This paper presents a flexible scanning method by integrating laser line sensors with articulated arm coordinate measuring machines(AACMM).Since the output of the laser line sensor is 2D raw data in the laser plane,our system model introduces an explicit transformation from the 2D sensor coordinate frame to the 3D base coordinate frame of the AACMM(i.e.,the translation and rotation the of the 2D sensor coordinate in the sixth coordinate system of AACMM).To solve the model,the“conjugate pairs”are proposed and identified by measuring a fixed point(e.g.,a sphere center).Moreover,a search algorithm is adopted to find the optimal solution,which noticeably boosts the model accuracy.The experimental results show that the error of the system is about 0.2 mm,which is caused by the error of the AACMM,the sensor error and the calibration error.By measuring a complicated part,the proposed system is proved to be flexible and facilitate,with the ability to measure a part expediently from any necessary direction.Furthermore,the proposed calibration method can also be used for robot hand-eye relationship calibration.展开更多
The experiment system of 1000 m deep sea mining system is built up with the similarity theory. Sine mechanism is used to simulate mining ship to generate lateral shock excitation by ocean wave. Simulation and experime...The experiment system of 1000 m deep sea mining system is built up with the similarity theory. Sine mechanism is used to simulate mining ship to generate lateral shock excitation by ocean wave. Simulation and experiment of spherical joint connecting deep sea mining system has been done in band six marine conditions. The results indicate that the moment of spherical joint connecting deep sea mining is smaller than that of the thread connected ones, the lifting pipe of sphelical joint is ＂flexible pipe＂. The flexural torque of the articulated lifting pipe system in pump and buffer is generally periodic variation with some irregularity, the value is stable on 60 N·S, and it is obviously smaller than that of the fixed lifting pipe system; The total displacement exhibits cyclic variation pattern, and the periodicity of them is longer than that of sea current. The results of experiment and simulation are basically consistent. And the analysis in the paper offers theoretical foundation of 1000 m deep sea mining system in China.展开更多
Articulated buoys become more and more popular by the marine management departments as a new type of aids to navigation, for they possess an excellent hydrodynamic performance with small static heel angle in wind and ...Articulated buoys become more and more popular by the marine management departments as a new type of aids to navigation, for they possess an excellent hydrodynamic performance with small static heel angle in wind and current and small rolling in wave and accurate position. The structure of articulated buoys and calculation method of their hydrodynamic performance are introduced in this paper. A scries of experiments has been conducted in the State Key Laboratory of Ocean Engineering of China and useful results achieved for providing a design optimization basis.展开更多
Based on the study of passive articulated rover,a complete suspension kinematics model from wheel to inertial reference frame is presented,which uses D-H method of manipulator and presentation with Euler angle of pitc...Based on the study of passive articulated rover,a complete suspension kinematics model from wheel to inertial reference frame is presented,which uses D-H method of manipulator and presentation with Euler angle of pitch,roll and yaw.An improved contact model is adopted aimed at the loose and rough lunar terrain.Using this kinematics model and numerical continuous and discrete Newton's method with iterative factor,the numerical method for estimation of kinematical parameters of articulated rovers on loose and rough terrain is constructed.To demonstrate this numerical method,an example of two torsion bar rocker-bogie lunar rover with eight wheels is presented.Simulation results show that the numerical method for estimation of kinematical parameters of articulated rovers based on improved contact model can improve the precision of kinematical estimation on loose and rough terrain and decrease errors caused by contact models established based on general hypothesis.展开更多
Due to the unique steering mechanism and driving characteristics of the articulated vehicle,a hybrid path planning method based on the articulated vehicle model is proposed to meet the demand of obstacle avoidance and...Due to the unique steering mechanism and driving characteristics of the articulated vehicle,a hybrid path planning method based on the articulated vehicle model is proposed to meet the demand of obstacle avoidance and searching the path back and forth of the articulated vehicle.First,Support Vector Machine(SVM)theory is used to obtain the two-dimensional optimal zero potential curve and the maximum margin,and then,several key points are selected from the optimal zero potential curves by using Longest Accessible Path(LAP)method.Next,the Cubic Bezier(CB)curve is adopted to connect the curve that satisfies the curvature constraint of the articulated vehicle between every two key points.Finally,Back and Forth Rapidly-exploring Random Tree with Course Correction(BFRRT-CC)is designed to connect paths that do not meet articulated vehicle curvature requirements.Simulation results show that the proposed hybrid path planning method can search a feasible path with a 90-degree turn,which meets the demand for obstacle avoidance and articulated vehicle back-and-forth movement.展开更多
In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting sy...In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.展开更多
With the development and improvement of the hydraulic steering system,the articulated steering system became the research focus of numerous domestic and foreign scholars.The full hydraulic steering system with a compa...With the development and improvement of the hydraulic steering system,the articulated steering system became the research focus of numerous domestic and foreign scholars.The full hydraulic steering system with a compact structure and ease of operation,is widely used in articulated steering mode.Furthermore,its performance can directly impact the steering sensitivity and stability.This paper studies the working principle and actual structure of the priority valve and the steering control valve,which are very important.By setting up a mathematic model,the system’s load-sensing characteristics and the impact of steering control valve bypass throttle damping on steering stability can be analyzed.The Hydraulic Components Design(HCD)model was established for the hydraulic part of this system.It is proved that the model can reflect the system’s actual properties by comparing simulation and experimental results.The dynamic model is based on its actual prototype parameters by taking the tire and ground forces into account.The steering process’s dynamic characteristics are co-simulated in the 1D+3D system model by combining AMESim and Virtual.Lab Motion.The simulation results show that the system’s load-sensing characteristics ensure the sensitivity of the steering operation,and the bypass throttle damping has significantly improved the operation stability and lowered down the cylinder pressure fluctuations.This can improve the system performance by appropriate optimization.展开更多
A new method of elastic articulated objects (human bodies) modeling was presented based on a new conic curve. The model includes 3D object deformable curves which can represent the deformation of human occluding conto...A new method of elastic articulated objects (human bodies) modeling was presented based on a new conic curve. The model includes 3D object deformable curves which can represent the deformation of human occluding contours. The deformation of human occluding contour can be represented by adjusting only four deformation parameters for each limb. Then, the 3D deformation parameters are determined by corresponding 2D contours from a sequence of stereo images. The algorithm presented in this paper includes deformable conic curve parameters determination and the plane, 3D conic curve lying on, parameter determination.展开更多
This paper presents a simplified numerical simulation tool for the elasto-plastic calculation of plane articulated truss by the finite element method (FEM) in MATLAB. The simplified approach consists of linearizing is...This paper presents a simplified numerical simulation tool for the elasto-plastic calculation of plane articulated truss by the finite element method (FEM) in MATLAB. The simplified approach consists of linearizing isotropic strain-hardening (to obtain a bilinear material law). The numerical implementation is built on the basis of the incremental and iterative FEM algorithms. The numerical resolution technique used is based on the projection methods of the modified Newton-Raphson solution. The MATLAB program is developed for the application of a 3-bar truss under monotonous quasi-static loading. Different values of the approximation error of the convergence criterion are used to study its impact on the quality of the algorithm. Numerical simulations have shown the reliability and quality of our simplified approach regardless of the approximation error.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.42506226 and 52301321)the Natural Science Foundation of Jiangsu Province(Grant Nos.BK20251032,BK20230669 and BK20231255)。
文摘This study examines the structural responses of a novel articulated foundation wind turbine with compliant structural design under offshore winds,waves,and seismic events.A numerical simulation analysis framework,ADRT(Articulated Foundation Offshore Wind Turbine Dynamic Analysis and Response Prediction Tool),has been developed and validated through benchmark studies with established numerical tools,demonstrating strong correlation.The research conducts dynamic response analysis of the Articulated Foundation Offshore Wind Turbine(AFOWT)system under various seismic scenarios.Analysis reveals that response amplitude increases proportionally with seismic intensity.When wind and seismic forces act simultaneously,the system's response amplitude perpendicular to the rotor plane decreases compared with isolated seismic action,attributed to aerodynamic damping effects,except for blade deformation response.During emergency braking shutdown operations triggered by seismic excitation,the structural seismic response exceeds design safety thresholds during the shutdown feathering process,indicating that emergency shutdown procedures do not effectively mitigate the system's structural response.
基金supported by National Basic Research Program of China(973 Program, Grant No. 2013CB035502)International Science and Technology Cooperation Project with Russia (Grant No. 2010DFR70270)+2 种基金National Natural Science Foundation of China (Grant No. 51275106)"111" Project (Grant No. B07018)Key Laboratory Opening Funding of Aerospace Mechanism and Control, China (Grant No. HIT. KLOF.2010057)
文摘The accuracy of an articulated torque analysis influences the comprehensive performances of heavy-duty multi-legged robots. Currently, the extremal estimation method and some complex methods are employed to calculate the articulated torques, which results in a large safety margin or a large number of calculations. To quickly obtain accurate articulated torques, an analysis method for the articulated torque is presented for an electrically driven heavy-duty six-legged robot. First, the rearmost leg that experiences the maximum normal contact force is confirmed when the robot transits a slope. Based on the ant-type and crab-type tripod gaits, the formulas of classical mechanics and MATLAB software are employed to theoretically analyze the relevant static torques of the joints. With the changes in the joint angles for the abductor joint, hip joint, and knee joint, variable tendency charts and extreme curves are obtained for the static articulated torques. Meanwhile, the maximum static articulated torques and the corresponding poses of the robot are also obtained. According to the poses of the robot under the maximum static articulated torques, ADAMS software is used to carry out a static simulation analysis. Based on the relevant simulation curves of the articulated torques, the maximum static articulated torques are acquired. A comparative analysis of the maximum static articulated torques shows that the theoretical calculation values are higher than the static simulation values, and the maximum error value is approximately 10%. The proposed method lays a foundation for quickly determining accurate articulated torques to develop heavy-duty six-legged robots.
基金the Fundamental Research Funds for the Central Universities of China(No.FRF-TP-15-023A1)the National Key R&D Program Project(Nos.2016YFC0802905 and 2018YFC0604403)
文摘This paper designs a novel controller to improve the path-tracking performance of articulated dump truck(ADT). By combining linear quadratic regulator(LQR) with genetic algorithm(GA), the designed controller is used to control linear and angular velocities on the midpoint of the front frame. The novel controller based on the error dynamics model is eventually realized to track the path high-precisely with constant speed. The results of simulation and experiment show that the LQR-GA controller has a better tracking performance than the existing methods under a low speed of 3 m/s. In this paper, kinematics model and simulation control models based on co-simulation of ADAMS and Matlab/Simulink are established to verify the proposed strategy. In addition, a real vehicle experiment is designed to further more correctness of the conclusion. With the proposed controller and considering the steering model in the simulation, the control performance is improved and matches the actual situation better. The research results contribute to the development of automation of ADT.
基金Project supported by the Second Stage of Brain Korea 21 Projectssupported by Basic Science Research Program through the National Research Foundation of Korea (NRF)funded by the Ministry of Education,Science and Technology (2011-0013902)
文摘In general, the orientation interpolation of industrial robots has been done based on Euler angle system which can result in singular point （so-called Gimbal Lock）. However, quaternion interpolation has the advantage of natural （specifically smooth） orientation interpolation without Gimbal Lock. This work presents the application of quatemion interpolation, specifically Spherical Linear IntERPolation （SLERP）, to the orientation control of the 6-axis articulated robot （RS2） using LabVIEW and RecurDyn. For the comparison of SLERP with linear Euler interpolation in the view of smooth movement （profile） of joint angles （torques）, the two methods are dynamically simulated on RS2 by using both LabVIEW and RecurDyn. Finally, our original work, specifically the implementation of SLERP and linear Euler interpolation on the actual robot, i.e. RS2, is done using LabVIEW motion control tool kit. The SLERP orientation control is shown to be effective in terms of smooth joint motion and torque when compared to a conventional （linear） Euler interpolation.
基金Supported by National Natural Science Foundation of China(Grant No.51265017)Jiangxi Provincial Science and Technology Planning Project,China(Grant No.GJJ12468)Science and Technology Planning Project of Ji’an City,China(Grant No.20131828)
文摘The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable calibration parameters. To compensate for the deficiency of one measurement model, the multiple measurement models are built by the Denavit-Hartenberg＇s notation, the homemade standard rod components are used as a calibration tool and the Levenberg-Marquardt calibration algorithm is applied to solve the structural parameters in the measurement models. During the tests of multiple measurement models, the sample areas are selected in two situations. It is found that the measurement errors＇ sigma value（0.083 4 ram） dealt with one measurement model is nearly two times larger than that of the multiple measurement models（0.043 1 ram） in the same sample area. While in the different sample area, the measurement errors＇ sigma value（0.054 0 ram） dealt with the multiple measurement models is about 40% of one measurement model（0.137 3 mm）. The preliminary results suggest that the measurement accuracy of AACMM dealt with multiple measurement models is superior to the accuracy of the existing machine with one measurement model. This paper proposes the multiple measurement models to improve the measurement accuracy of AACMM without increasing any hardware cost.
基金Sponsored by the National High Technology Research and Development Program:Underground Mining Intelligent Truck(Grant No.2011AA060404)
文摘The requirements of vehicle dynamic stability control are higher than ever as the significant increase of electric drive articulated vehicle speed. According to the construction features of articulated dumping truck and nonlinear characteristics of moving vehicles,nonlinear observer of vehicle status is designed to strength robustness of dynamic control system in this paper. A 4-degree-of-freedom nonlinear dynamic model of articulated electric drive vehicle is built as reference model to estimate the state of the articulated vehicle. And by adopting Unscented Kalman Filter( UKF) algorithm,a series of state parameters such as longitudinal velocities of front and rear frames,yaw rate and side-slip angle are estimated. During the test of 60 t articulated electric drive vehicle,2 inertial navigation modules are installed in the front frame and rear frame respectively and the speed of each electric drive wheel is obtained simultaneously. As the test results suggest,in various working conditions,the algorithm based on UKF is able to accurately estimate the state parameters of articulated vehicle with the estimated error less than 5%. The proposed method is justified to be the theoretical basis and application guidance for articulated vehicle stability control.
基金National Natural Science Foundation of China(Grant No.42076192).
文摘Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control.Owing to increasing structural complexity of recent products,measurements from multiple directions are typically required in current scanning techniques.Specifically,the plane structured light can be applied to measure one area of a part at a time,with an additional algorithm required to merge the collected data of each area.Alternatively,the line structured light sensor integrated on CNC machines or CMMs could also realize multi-view measurement.However,the system needs to be repeatedly calibrated at each new direction.This paper presents a flexible scanning method by integrating laser line sensors with articulated arm coordinate measuring machines(AACMM).Since the output of the laser line sensor is 2D raw data in the laser plane,our system model introduces an explicit transformation from the 2D sensor coordinate frame to the 3D base coordinate frame of the AACMM(i.e.,the translation and rotation the of the 2D sensor coordinate in the sixth coordinate system of AACMM).To solve the model,the“conjugate pairs”are proposed and identified by measuring a fixed point(e.g.,a sphere center).Moreover,a search algorithm is adopted to find the optimal solution,which noticeably boosts the model accuracy.The experimental results show that the error of the system is about 0.2 mm,which is caused by the error of the AACMM,the sensor error and the calibration error.By measuring a complicated part,the proposed system is proved to be flexible and facilitate,with the ability to measure a part expediently from any necessary direction.Furthermore,the proposed calibration method can also be used for robot hand-eye relationship calibration.
基金This research was financially supported by China Ocean Mineral Resources Reasearch and Design Association (GrantNo DY105-03-02-17)Ph.D Programs Foundation of Ministry of Education of China (Grant No20060008025)
文摘The experiment system of 1000 m deep sea mining system is built up with the similarity theory. Sine mechanism is used to simulate mining ship to generate lateral shock excitation by ocean wave. Simulation and experiment of spherical joint connecting deep sea mining system has been done in band six marine conditions. The results indicate that the moment of spherical joint connecting deep sea mining is smaller than that of the thread connected ones, the lifting pipe of sphelical joint is ＂flexible pipe＂. The flexural torque of the articulated lifting pipe system in pump and buffer is generally periodic variation with some irregularity, the value is stable on 60 N·S, and it is obviously smaller than that of the fixed lifting pipe system; The total displacement exhibits cyclic variation pattern, and the periodicity of them is longer than that of sea current. The results of experiment and simulation are basically consistent. And the analysis in the paper offers theoretical foundation of 1000 m deep sea mining system in China.
文摘Articulated buoys become more and more popular by the marine management departments as a new type of aids to navigation, for they possess an excellent hydrodynamic performance with small static heel angle in wind and current and small rolling in wave and accurate position. The structure of articulated buoys and calculation method of their hydrodynamic performance are introduced in this paper. A scries of experiments has been conducted in the State Key Laboratory of Ocean Engineering of China and useful results achieved for providing a design optimization basis.
基金Sponsored by the National High Technology Research and Development Program of China(863 Program)(Grant No.2006AA04Z231)the National Science Foundation of Heilongjiang Province(Grant No.ZJG0709)"The 111 Project"(Grant No.B07018)
文摘Based on the study of passive articulated rover,a complete suspension kinematics model from wheel to inertial reference frame is presented,which uses D-H method of manipulator and presentation with Euler angle of pitch,roll and yaw.An improved contact model is adopted aimed at the loose and rough lunar terrain.Using this kinematics model and numerical continuous and discrete Newton's method with iterative factor,the numerical method for estimation of kinematical parameters of articulated rovers on loose and rough terrain is constructed.To demonstrate this numerical method,an example of two torsion bar rocker-bogie lunar rover with eight wheels is presented.Simulation results show that the numerical method for estimation of kinematical parameters of articulated rovers based on improved contact model can improve the precision of kinematical estimation on loose and rough terrain and decrease errors caused by contact models established based on general hypothesis.
基金This work was supported by the Jiangsu Natural Science Foundation Project BK20170681National Natural Science Foundation of China 51675281.
文摘Due to the unique steering mechanism and driving characteristics of the articulated vehicle,a hybrid path planning method based on the articulated vehicle model is proposed to meet the demand of obstacle avoidance and searching the path back and forth of the articulated vehicle.First,Support Vector Machine(SVM)theory is used to obtain the two-dimensional optimal zero potential curve and the maximum margin,and then,several key points are selected from the optimal zero potential curves by using Longest Accessible Path(LAP)method.Next,the Cubic Bezier(CB)curve is adopted to connect the curve that satisfies the curvature constraint of the articulated vehicle between every two key points.Finally,Back and Forth Rapidly-exploring Random Tree with Course Correction(BFRRT-CC)is designed to connect paths that do not meet articulated vehicle curvature requirements.Simulation results show that the proposed hybrid path planning method can search a feasible path with a 90-degree turn,which meets the demand for obstacle avoidance and articulated vehicle back-and-forth movement.
基金This research project was financially supported by China Ocean Mineral Resources R&D Association(Grant No.DY105-03-02-17)Ph.D.Programs Foundation of Ministry of Education of China(Grant No.20060008025)
文摘In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.
基金This work was supported by the National Key Research and Development Program of China,No.2018YFB2000900。
文摘With the development and improvement of the hydraulic steering system,the articulated steering system became the research focus of numerous domestic and foreign scholars.The full hydraulic steering system with a compact structure and ease of operation,is widely used in articulated steering mode.Furthermore,its performance can directly impact the steering sensitivity and stability.This paper studies the working principle and actual structure of the priority valve and the steering control valve,which are very important.By setting up a mathematic model,the system’s load-sensing characteristics and the impact of steering control valve bypass throttle damping on steering stability can be analyzed.The Hydraulic Components Design(HCD)model was established for the hydraulic part of this system.It is proved that the model can reflect the system’s actual properties by comparing simulation and experimental results.The dynamic model is based on its actual prototype parameters by taking the tire and ground forces into account.The steering process’s dynamic characteristics are co-simulated in the 1D+3D system model by combining AMESim and Virtual.Lab Motion.The simulation results show that the system’s load-sensing characteristics ensure the sensitivity of the steering operation,and the bypass throttle damping has significantly improved the operation stability and lowered down the cylinder pressure fluctuations.This can improve the system performance by appropriate optimization.
基金the Postdoctoral Science Foundation of China(Grant No.20070421018)
文摘A new method of elastic articulated objects (human bodies) modeling was presented based on a new conic curve. The model includes 3D object deformable curves which can represent the deformation of human occluding contours. The deformation of human occluding contour can be represented by adjusting only four deformation parameters for each limb. Then, the 3D deformation parameters are determined by corresponding 2D contours from a sequence of stereo images. The algorithm presented in this paper includes deformable conic curve parameters determination and the plane, 3D conic curve lying on, parameter determination.
文摘This paper presents a simplified numerical simulation tool for the elasto-plastic calculation of plane articulated truss by the finite element method (FEM) in MATLAB. The simplified approach consists of linearizing isotropic strain-hardening (to obtain a bilinear material law). The numerical implementation is built on the basis of the incremental and iterative FEM algorithms. The numerical resolution technique used is based on the projection methods of the modified Newton-Raphson solution. The MATLAB program is developed for the application of a 3-bar truss under monotonous quasi-static loading. Different values of the approximation error of the convergence criterion are used to study its impact on the quality of the algorithm. Numerical simulations have shown the reliability and quality of our simplified approach regardless of the approximation error.
