Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−freque...Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.展开更多
The partial discharge occurring in the weak part of the insulation of a converter transformer results in the formation of a large number of bubbles in the insulating oil.The migration,deformation,and other dynamic beh...The partial discharge occurring in the weak part of the insulation of a converter transformer results in the formation of a large number of bubbles in the insulating oil.The migration,deformation,and other dynamic behaviors of bubbles in the region of a strong electric field can cause them to easily accumulate into“small bridges”of impurities that can lead to breakdown of the oil gap.The authors of this study experimentally investigate and discuss the mechanisms of migration and deformation of bubbles in oil during partial discharge under composite AC/DC voltage to clarify their dynamic behaviors.The influence of the initial position of the bubbles on their trajectory of migration and velocity as well as the morphological changes occurring in them are analyzed using numerical simulations.The results show that the bubbles move away from the strong electric field due to the action of the dielectrophoretic force.The interface of the bubbles is longitudinally stretched under the action of the electrostrictive force and the vertical component of the drag force and gradually recovers to assume a spherical shape under the influence of surface tension and the horizontal component of the drag force.展开更多
While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfa...While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.展开更多
Oxygen(O_(2))is essential for life support and rocket propulsion in Mars exploration missions,and in situ oxygen production from the Martian atmosphere is of profound scientific and engineering significance.In this ar...Oxygen(O_(2))is essential for life support and rocket propulsion in Mars exploration missions,and in situ oxygen production from the Martian atmosphere is of profound scientific and engineering significance.In this article,we propose a novel method for O_(2) production from the Martian atmosphere by using glow discharge ionization combined with a self-developed oxygen-permeable membrane(OPM).Experiments under simulated Martian atmospheric conditions examined parameter impacts on the O_(2) production rate and assessed the operating characteristics and glow discharge plasma tolerance of the OPM.Results indicate that(1)the proportion of O_(2) produced positively correlates with the ionization voltage under fixed discharge electrode spacing,pressure,and flow rate,reaching a maximum of 8.18%(saturating at 4600–5400 V);(2)O_(2) yield rises with the carbon dioxide(CO_(2))flow rate at a constant pressure,with the maximum value reaching 0.5 g/h;(3)titanium(Ti)and molybdenum(Mo)electrodes exhibit higher application potential under high voltage conditions;(4)the OPM operates at temperatures above 800℃ and shows few changes in the main body sections after 24 h of plasma tolerance testing.This study lays the foundation for future development of a mature Mars oxygen production prototype with lower energy consumption and higher efficiency.展开更多
Objective:To systematically summarize and evaluate the evidence on discharge preparation services for patients undergoing total knee arthroplasty,providing an evidence-based foundation for developing scientific and st...Objective:To systematically summarize and evaluate the evidence on discharge preparation services for patients undergoing total knee arthroplasty,providing an evidence-based foundation for developing scientific and standardized discharge preparation intervention programs in clinical practice.Methods:Following the“5S”evidence model,literature such as guidelines,expert consensuses,evidence summaries and randomized controlled trials related to discharge preparation services for total knee arthroplasty patients were retrieved from relevant websites and databases,both domestic and international,from database inception to August 31,2025.Two researchers independently screened the literature,conducted quality appraisals,and extracted and synthesized the evidence.Results:A total of 15 articles were included,comprising 3 guidelines,4 expert consensuses,3 evidence summaries,3 systematic reviews and 2 randomized controlled trials.Ultimately,23 pieces of evidence were summarized across five aspects.Conclusion:This study synthesizes the evidence on discharge preparation services for patients undergoing total knee arthroplasty.It is recommended that healthcare professionals apply this evidence in clinical practice,considering specific circumstances and patient needs.展开更多
Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have n...Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have not been thoroughly investigated.In this study,multiple tracers(hydrochemistry,𝛿D,𝛿18O and 222Rn)were used to compare mechanisms of LGD in Daihai and Ulansuhai Lake in Inner Mongoli1,Northwest China.The hydrochemical types showed a trend from groundwater to lake water,indicating a hydraulic connection between them.In addition,the𝛿D and𝛿18O values of sediment pore water were between the groundwater and lake water,indicating the LGD processes.The radon mass balance model was used to estimate the average groundwater discharge rates of Daihai and Ulansuhai Lake,which were 2.79 mm/day and 3.02 mm/day,respectively.The total nitrogen(TN),total phosphorus(TP),and fluoride inputs associated with LGD in Daihai Lake accounted for 97.52%,96.59%,and 95.84%of the total inputs,respectively.In contrast,TN,TP and fluoride inputs in Ulansuhai Lake were 53.56%,40.98%,and 36.25%,respectively.This indicates that the pollutant inputs associated with LGD posed a potential threat to the ecological stability of Daihai and Ulansuhai Lake.By comparison,the differences of LGD process and associated pollutant flux were controlled by hydrogeological conditions,lakebed permeability and human activities.This study provides a reference for water resources management in Daihai and Ulansuhai Lake basins while improving the understanding of LGD in the Yellow River basin.展开更多
The combustion chamber is the core component of an aero-engine, and affects its reliability and security operation, even the performance of the aircraft. In this work, a Plasma-Assisted Combustion(PAC) test platform w...The combustion chamber is the core component of an aero-engine, and affects its reliability and security operation, even the performance of the aircraft. In this work, a Plasma-Assisted Combustion(PAC) test platform was developed to validate the feasibility of using PAC actuators to enhance annular combustor performance. Two plans of PAC(rotating gliding arc discharge plasma) were designed, Assisted Combustion from Primary Holes(ACPH) and Assisted Combustion from Dilution Holes(ACDH). Comparative experiments and analysis between conventional combustion and PAC were conducted to study the effects of ACPH and ACDH on the performances including average outlet temperature, combustion efficiency, pattern factor under four different excessive air coefficients(0.8, 1, 2, and 4), and lean blowout performance at different inlet airflow velocities. Experimental results show that the combustion efficiency is improved after PAC compared with that in normal conditions, and the combustion efficiency of ACPH increases2.45%, 1.49%, 1.04%, and 0.47%, while it increases 2.75%, 1.67%, 1.36%, and 0.36% under ACDH conditions. The uniformity of the outlet temperature field and the lean blowout performance are improved after PAC. Especially for ACPH, the widening of the lean blowout limit is8.3%, 12.4%, 12.8%, and 25% respectively when the inlet velocity ranges from 60 m/s to120 m/s. These results offer new perspectives for using PAC devices to enhance aero-engine combustors' performances.展开更多
PCDD/Fs have been become a serious issue because of their toxicological effects and associated adverse health implications. In this study, the gliding arc plasma was tested for treatment of polychlorinated dibenzo-p-d...PCDD/Fs have been become a serious issue because of their toxicological effects and associated adverse health implications. In this study, the gliding arc plasma was tested for treatment of polychlorinated dibenzo-p-dioxins （PCDDs） and polychlorinated dibenzofurans （PCDFs）, which was synthesized from pentachlorophenol in atmospheric condition at 350℃ with or without the catalysis of CuCl2. From the experiment, we found that the destruction efficiency of PCDD/F homologues after gliding was discharge ranged from 25% to 79%. This result demonstrates that gliding arc plasma is an effective technology to decompose PCDDs/Fs in flue gas. A plausible degradation mechanism for PCDD/Fs by gliding arc was discussed. Finally, a multistage reactor structure of gliding arc was proposed to upgrade removal efficiency for PCDD/Fs.展开更多
Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-co...Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.展开更多
Wheat （Triticum aestivum） seeds were treated with atmospheric pressure gliding arc discharge plasmas to investigate the effects on water absorption, seed germination rate, seedling growth and yield in wheat. The sur...Wheat （Triticum aestivum） seeds were treated with atmospheric pressure gliding arc discharge plasmas to investigate the effects on water absorption, seed germination rate, seedling growth and yield in wheat. The surface architectures and functionalities of the seeds were found to modify due to plasma treatments. 6 rain treatment was provided 95%-100% germination rate. For the treatment duration of 3 and 9 rain the growth activity, dry matter accumulation, leaves chlorophyll contents, longest spikes, number of spikes/spikelet and total soluble protein content in shoots were improved. The grain yield of wheat was increased ,--20% by 6 min treatment with H2O/O2 plasma with respect to control.展开更多
Multi-walled carbon nanotubes （MWCNTs） are grown by arc discharge method in a controlled methane environment. The arc discharge is produced between two graphite electrodes at the ambient pressures of 100 tort, 300 t...Multi-walled carbon nanotubes （MWCNTs） are grown by arc discharge method in a controlled methane environment. The arc discharge is produced between two graphite electrodes at the ambient pressures of 100 tort, 300 torr, and 500 torr. Arc plasma parameters such as temperature and density are estimated to investigate the influences of the ambient pressure and the contributions of the ambient pressure to the growth and the structure of the nanotubes. The plasma temperature and density are observed to increase with the increase in the methane ambient pressure. The samples of MWCNT synthesized at different ambient pressures are analyzed using transmission electron microscopy, scanning electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. An increase in the growth of MWCNT and a decrease in the inner tube diameter are observed with the increase in the methane ambient pressure.展开更多
This study conducted experiments on producing inhaled medical nitric oxide （iNO） by pulsed arc discharge in dry and clean air under different discharge current. The concentration of NO and NO2 produced by air discha...This study conducted experiments on producing inhaled medical nitric oxide （iNO） by pulsed arc discharge in dry and clean air under different discharge current. The concentration of NO and NO2 produced by air discharge, as well as the change of the ratio of NO2/NO under different discharge current were investigated. Through the analysis of plasma emission spectrum, the relationship between discharge current and arc plasma temperature was studied. The results indicate that, as discharge current increases, the arc plasma temperature increases, which then leads to the increase of NO concentration, the decrease of NO2 concentration, and the rapid decrease of the ratio of NO2/NO. When the plasma temperature is 9000 K, the ratio of NO2/NO is approximately 60%, while when the plasma temperature varies between 10550 K and 11300 K, the NO2/NO ratio is within the range of 4.2% to 4.6%.展开更多
A study is conducted to determine the effect of a kind of high-pressure arc discharge plasma on the degradation rate and kinetic equations of chlorpyrifos in different solvents with the treated times and concentration...A study is conducted to determine the effect of a kind of high-pressure arc discharge plasma on the degradation rate and kinetic equations of chlorpyrifos in different solvents with the treated times and concentrations as variables. The degradation rate was sorted in different solvents as water, methanol, acetone and then acetoacetate. The tendencies of the degradation rates with treated time in water and methanol were optimally fitted with first-order kinetics equations while those in acetone and acetoacetate were fitted with zeroth-order kinetics equations. The difference was attributed to the stronger polarity of water and methanol. The weak correlation of the degradation rates with time was mainly because the high-temperature of the arc discharge tube and the chemically-active species generated by the discharge. The degradation half-life was extended with increase of chlorpyrifos concentration. A degradation half-life less than 3 min was achieved for chlorpyrifos in water and methanol when the initial concentration was less than 300 μg/ml.展开更多
An application of magnetic field to the nanosecond pulse corona discharge is investigated. A cylinder reactor with different corona electrodes is set up for experimental study. A magnetic field with its direction perp...An application of magnetic field to the nanosecond pulse corona discharge is investigated. A cylinder reactor with different corona electrodes is set up for experimental study. A magnetic field with its direction perpendicular to the corona discharge is applied. Different discharge images are taken under single nanosecond pulse with a high sensitive UV-visible light imagine recorder. Experimental results show that with a cross magnetic field the nanosecond corona discharge both generates paths and develops homogeneously in space more than that without the magnetic field. The results may lead to a possibility to apply a cross magnetic field on nanosecond pulse corona discharge for getting higher desulfurization efficiency.展开更多
The thermionic vacuum arc （TVA） is a new type of plasma source, which generates a pure metal and ceramic vapour plasma containing ions with a directed energy. TVA discharges can be ignited in high vacuum conditions ...The thermionic vacuum arc （TVA） is a new type of plasma source, which generates a pure metal and ceramic vapour plasma containing ions with a directed energy. TVA discharges can be ignited in high vacuum conditions between a heated cathode （electron gun） and an anode （tungsten crucible） containing the material. The accelerated electron beam, incident on the anode, heats the crucible, together with its contents, to a high temperature. After establishing a steadystate density of the evaporating anode material atoms, and when the voltage applied is high enough, a bright discharge is ignited between the electrodes. We generated silver and Al2O3 TVA discharges in order to compare the metal and ceramic TVA discharges. The electrical and optical characteristics of silver and Al2O3 TVA discharges were analysed. The TVA is also a new technique for the deposition of thin films. The film condenses on the sample from the plasma state of the vapour phase of the anode material, generated by a TVA. We deposited silver and Al2O3 thin films onto an aluminium substrate layer-by-layer using their TVA discharges, and produced micro and/or nano-layer Ag-Al2O3 composite samples. The composite samples using scanning electron microscopy was also analysed.展开更多
Nitric oxide （NO） is increasingly being used in medical treatments of high blood pressure, acute respiratory distress syndrome and other illnesses related to the lungs. Currently a NO inhalation system consists of a...Nitric oxide （NO） is increasingly being used in medical treatments of high blood pressure, acute respiratory distress syndrome and other illnesses related to the lungs. Currently a NO inhalation system consists of a gas cylinder of N2 mixed with a high concentration of NO. This arrangement is potentially risky due to the possibility of an accidental leak of NO from the cylinder. The presence of NO in the air leads to the formation of nitric dioxide （NO2）, which is toxic to the lungs. Therefore, an on-site generator of NO would be highly desirable for medical doctors to use with patients with lung disease. To develop the NO inhalation system without a gas cylinder, which would include a high concentration of NO, NAMIHIRA et al have recently reported on the production of NO from room air using a pulsed arc discharge. In the present work, the temperature of the pulsed arc discharge plasma used to generate NO was measured to optimize the discharge condition. The results of the temperature measurements showed the temperature of the pulsed arc discharge plasma reached about 10,000 K immediately after discharge initiation and gradually decreased over tens of microseconds. In addition, it was found that NO was formed in a discharge plasma having temperatures higher than 9,000 K and a smaller input energy into the discharge plasma generates NO more efficiently than a larger one.展开更多
In agriculture production,plant health is threatened by pathogens parasitic on seeds;hence,it is necessary to disinfect harvested seeds before germination.In this study,a technique of gliding arc plasma treatment was ...In agriculture production,plant health is threatened by pathogens parasitic on seeds;hence,it is necessary to disinfect harvested seeds before germination.In this study,a technique of gliding arc plasma treatment was proposed and investigated.The experiment was conducted to treat Astragalus membranaceus(A.membranaceus)seeds that were artificially infected with Fusarium oxysporum(F.oxysporum).The plasma treatment duration varied from 30 s to 270 s.Direct and indirect treatments were compared to evaluate the inactivation efficiency of the F.oxysporum spores on the surface of seeds.The results indicated that the direct treatment behaved significantly better in disinfection than the indirect way.Meanwhile,experiments of the quantitative assessment of seed germination were also conducted,including the germination rate,the germination potential,and the germination index.The results showed that the inactivation efficiency increased as the plasma treatment time was extended.When the treatment time was90 s,the inactivation efficiency reached more than 98%.The plasma treatment of 270 s had a complete devitalization of F.oxysporum spores on the surface of the seeds.After the treatment of 30 s and 90 s,the seed germination parameters improved significantly.This study verified the inactivation efficacy of gliding arc discharge plasma under atmospheric pressure.The technique of gliding arc treatment shows advantages of energy saving and adaptation and has the potential to be utilized in industry.展开更多
基金funded by the Science and Technology Program of State Grid Corporation of China(5500-202356358A-2-1-ZX).
文摘Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.
基金supported by the National Natural Science Foundation of China(No.U1966209)the State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources(NCEPU,LAPS22001).
文摘The partial discharge occurring in the weak part of the insulation of a converter transformer results in the formation of a large number of bubbles in the insulating oil.The migration,deformation,and other dynamic behaviors of bubbles in the region of a strong electric field can cause them to easily accumulate into“small bridges”of impurities that can lead to breakdown of the oil gap.The authors of this study experimentally investigate and discuss the mechanisms of migration and deformation of bubbles in oil during partial discharge under composite AC/DC voltage to clarify their dynamic behaviors.The influence of the initial position of the bubbles on their trajectory of migration and velocity as well as the morphological changes occurring in them are analyzed using numerical simulations.The results show that the bubbles move away from the strong electric field due to the action of the dielectrophoretic force.The interface of the bubbles is longitudinally stretched under the action of the electrostrictive force and the vertical component of the drag force and gradually recovers to assume a spherical shape under the influence of surface tension and the horizontal component of the drag force.
基金supported by National Key Research and Development Program of China(2022YFB3804902,2022YFB3804900)the National Natural Science Foundation of China(52203226,52161145406,42376045)the Fundamental Research Funds for the Central Universities(2232024Y-01,2232025D-02).
文摘While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.
基金supported by the Open Fund of the National Key Laboratory of Deep Space Exploration(No.NKDSEL2024004-2)the National Natural Science Foundation of China(No.42173045)supported by the Shandong Provincial Natural Science Foundation(No.ZR2025QC448).
文摘Oxygen(O_(2))is essential for life support and rocket propulsion in Mars exploration missions,and in situ oxygen production from the Martian atmosphere is of profound scientific and engineering significance.In this article,we propose a novel method for O_(2) production from the Martian atmosphere by using glow discharge ionization combined with a self-developed oxygen-permeable membrane(OPM).Experiments under simulated Martian atmospheric conditions examined parameter impacts on the O_(2) production rate and assessed the operating characteristics and glow discharge plasma tolerance of the OPM.Results indicate that(1)the proportion of O_(2) produced positively correlates with the ionization voltage under fixed discharge electrode spacing,pressure,and flow rate,reaching a maximum of 8.18%(saturating at 4600–5400 V);(2)O_(2) yield rises with the carbon dioxide(CO_(2))flow rate at a constant pressure,with the maximum value reaching 0.5 g/h;(3)titanium(Ti)and molybdenum(Mo)electrodes exhibit higher application potential under high voltage conditions;(4)the OPM operates at temperatures above 800℃ and shows few changes in the main body sections after 24 h of plasma tolerance testing.This study lays the foundation for future development of a mature Mars oxygen production prototype with lower energy consumption and higher efficiency.
文摘Objective:To systematically summarize and evaluate the evidence on discharge preparation services for patients undergoing total knee arthroplasty,providing an evidence-based foundation for developing scientific and standardized discharge preparation intervention programs in clinical practice.Methods:Following the“5S”evidence model,literature such as guidelines,expert consensuses,evidence summaries and randomized controlled trials related to discharge preparation services for total knee arthroplasty patients were retrieved from relevant websites and databases,both domestic and international,from database inception to August 31,2025.Two researchers independently screened the literature,conducted quality appraisals,and extracted and synthesized the evidence.Results:A total of 15 articles were included,comprising 3 guidelines,4 expert consensuses,3 evidence summaries,3 systematic reviews and 2 randomized controlled trials.Ultimately,23 pieces of evidence were summarized across five aspects.Conclusion:This study synthesizes the evidence on discharge preparation services for patients undergoing total knee arthroplasty.It is recommended that healthcare professionals apply this evidence in clinical practice,considering specific circumstances and patient needs.
基金supported by the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2023QN04011)the National Natural Science Foundation of China(Nos.42307092 and 52279067)+1 种基金Ordos Science and Technology Major Project(No.ZD20232303)Project of Key Laboratory of River and Lake in Inner Mongolia Autonomous Region(No.2022QZBZ0003).
文摘Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have not been thoroughly investigated.In this study,multiple tracers(hydrochemistry,𝛿D,𝛿18O and 222Rn)were used to compare mechanisms of LGD in Daihai and Ulansuhai Lake in Inner Mongoli1,Northwest China.The hydrochemical types showed a trend from groundwater to lake water,indicating a hydraulic connection between them.In addition,the𝛿D and𝛿18O values of sediment pore water were between the groundwater and lake water,indicating the LGD processes.The radon mass balance model was used to estimate the average groundwater discharge rates of Daihai and Ulansuhai Lake,which were 2.79 mm/day and 3.02 mm/day,respectively.The total nitrogen(TN),total phosphorus(TP),and fluoride inputs associated with LGD in Daihai Lake accounted for 97.52%,96.59%,and 95.84%of the total inputs,respectively.In contrast,TN,TP and fluoride inputs in Ulansuhai Lake were 53.56%,40.98%,and 36.25%,respectively.This indicates that the pollutant inputs associated with LGD posed a potential threat to the ecological stability of Daihai and Ulansuhai Lake.By comparison,the differences of LGD process and associated pollutant flux were controlled by hydrogeological conditions,lakebed permeability and human activities.This study provides a reference for water resources management in Daihai and Ulansuhai Lake basins while improving the understanding of LGD in the Yellow River basin.
基金supported by the National Natural Science Foundation of China (No. 51436008)
文摘The combustion chamber is the core component of an aero-engine, and affects its reliability and security operation, even the performance of the aircraft. In this work, a Plasma-Assisted Combustion(PAC) test platform was developed to validate the feasibility of using PAC actuators to enhance annular combustor performance. Two plans of PAC(rotating gliding arc discharge plasma) were designed, Assisted Combustion from Primary Holes(ACPH) and Assisted Combustion from Dilution Holes(ACDH). Comparative experiments and analysis between conventional combustion and PAC were conducted to study the effects of ACPH and ACDH on the performances including average outlet temperature, combustion efficiency, pattern factor under four different excessive air coefficients(0.8, 1, 2, and 4), and lean blowout performance at different inlet airflow velocities. Experimental results show that the combustion efficiency is improved after PAC compared with that in normal conditions, and the combustion efficiency of ACPH increases2.45%, 1.49%, 1.04%, and 0.47%, while it increases 2.75%, 1.67%, 1.36%, and 0.36% under ACDH conditions. The uniformity of the outlet temperature field and the lean blowout performance are improved after PAC. Especially for ACPH, the widening of the lean blowout limit is8.3%, 12.4%, 12.8%, and 25% respectively when the inlet velocity ranges from 60 m/s to120 m/s. These results offer new perspectives for using PAC devices to enhance aero-engine combustors' performances.
基金Project supported by the National Natural Science Foundation of China(No.50476058)Natural Science Foundation of Zhejiang Province(No.X506214)
文摘PCDD/Fs have been become a serious issue because of their toxicological effects and associated adverse health implications. In this study, the gliding arc plasma was tested for treatment of polychlorinated dibenzo-p-dioxins （PCDDs） and polychlorinated dibenzofurans （PCDFs）, which was synthesized from pentachlorophenol in atmospheric condition at 350℃ with or without the catalysis of CuCl2. From the experiment, we found that the destruction efficiency of PCDD/F homologues after gliding was discharge ranged from 25% to 79%. This result demonstrates that gliding arc plasma is an effective technology to decompose PCDDs/Fs in flue gas. A plausible degradation mechanism for PCDD/Fs by gliding arc was discussed. Finally, a multistage reactor structure of gliding arc was proposed to upgrade removal efficiency for PCDD/Fs.
基金the support from the Top Hundred Talents Program of Chinese Academy of Sciencesthe National Natural Science Foundation of China(Nos.21203223 and 21303234)
文摘Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.
基金Partial financial support has been provided by the Ministry of Science and Technology, Republic of Bangladesh: 39.00.0000.09.06.79.2017/2/98ESBangladesh Council for Scientific and Industrial Research (BCSIR) for providing Professor Abdullah Al-Muti Sharfuddin fellowship
文摘Wheat （Triticum aestivum） seeds were treated with atmospheric pressure gliding arc discharge plasmas to investigate the effects on water absorption, seed germination rate, seedling growth and yield in wheat. The surface architectures and functionalities of the seeds were found to modify due to plasma treatments. 6 rain treatment was provided 95%-100% germination rate. For the treatment duration of 3 and 9 rain the growth activity, dry matter accumulation, leaves chlorophyll contents, longest spikes, number of spikes/spikelet and total soluble protein content in shoots were improved. The grain yield of wheat was increased ,--20% by 6 min treatment with H2O/O2 plasma with respect to control.
文摘Multi-walled carbon nanotubes （MWCNTs） are grown by arc discharge method in a controlled methane environment. The arc discharge is produced between two graphite electrodes at the ambient pressures of 100 tort, 300 torr, and 500 torr. Arc plasma parameters such as temperature and density are estimated to investigate the influences of the ambient pressure and the contributions of the ambient pressure to the growth and the structure of the nanotubes. The plasma temperature and density are observed to increase with the increase in the methane ambient pressure. The samples of MWCNT synthesized at different ambient pressures are analyzed using transmission electron microscopy, scanning electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. An increase in the growth of MWCNT and a decrease in the inner tube diameter are observed with the increase in the methane ambient pressure.
基金supported by National Natural Science Foundation of China (No.50677026)the Graduates' Innovation Foundation of Huazhong University of Science and Technology of China (HF-08-11-2011-261)
文摘This study conducted experiments on producing inhaled medical nitric oxide （iNO） by pulsed arc discharge in dry and clean air under different discharge current. The concentration of NO and NO2 produced by air discharge, as well as the change of the ratio of NO2/NO under different discharge current were investigated. Through the analysis of plasma emission spectrum, the relationship between discharge current and arc plasma temperature was studied. The results indicate that, as discharge current increases, the arc plasma temperature increases, which then leads to the increase of NO concentration, the decrease of NO2 concentration, and the rapid decrease of the ratio of NO2/NO. When the plasma temperature is 9000 K, the ratio of NO2/NO is approximately 60%, while when the plasma temperature varies between 10550 K and 11300 K, the NO2/NO ratio is within the range of 4.2% to 4.6%.
基金supported by the National Natural Science Foundation of China(No.5017700)Provincial Nature Science Foundation of Shanxi(No.20051078)
文摘A study is conducted to determine the effect of a kind of high-pressure arc discharge plasma on the degradation rate and kinetic equations of chlorpyrifos in different solvents with the treated times and concentrations as variables. The degradation rate was sorted in different solvents as water, methanol, acetone and then acetoacetate. The tendencies of the degradation rates with treated time in water and methanol were optimally fitted with first-order kinetics equations while those in acetone and acetoacetate were fitted with zeroth-order kinetics equations. The difference was attributed to the stronger polarity of water and methanol. The weak correlation of the degradation rates with time was mainly because the high-temperature of the arc discharge tube and the chemically-active species generated by the discharge. The degradation half-life was extended with increase of chlorpyrifos concentration. A degradation half-life less than 3 min was achieved for chlorpyrifos in water and methanol when the initial concentration was less than 300 μg/ml.
基金National Natural Science Foundation of China (No.50237010)
文摘An application of magnetic field to the nanosecond pulse corona discharge is investigated. A cylinder reactor with different corona electrodes is set up for experimental study. A magnetic field with its direction perpendicular to the corona discharge is applied. Different discharge images are taken under single nanosecond pulse with a high sensitive UV-visible light imagine recorder. Experimental results show that with a cross magnetic field the nanosecond corona discharge both generates paths and develops homogeneously in space more than that without the magnetic field. The results may lead to a possibility to apply a cross magnetic field on nanosecond pulse corona discharge for getting higher desulfurization efficiency.
基金supported by the Eskisehir Osmangazi University project(200319009)
文摘The thermionic vacuum arc （TVA） is a new type of plasma source, which generates a pure metal and ceramic vapour plasma containing ions with a directed energy. TVA discharges can be ignited in high vacuum conditions between a heated cathode （electron gun） and an anode （tungsten crucible） containing the material. The accelerated electron beam, incident on the anode, heats the crucible, together with its contents, to a high temperature. After establishing a steadystate density of the evaporating anode material atoms, and when the voltage applied is high enough, a bright discharge is ignited between the electrodes. We generated silver and Al2O3 TVA discharges in order to compare the metal and ceramic TVA discharges. The electrical and optical characteristics of silver and Al2O3 TVA discharges were analysed. The TVA is also a new technique for the deposition of thin films. The film condenses on the sample from the plasma state of the vapour phase of the anode material, generated by a TVA. We deposited silver and Al2O3 thin films onto an aluminium substrate layer-by-layer using their TVA discharges, and produced micro and/or nano-layer Ag-Al2O3 composite samples. The composite samples using scanning electron microscopy was also analysed.
基金the Industrial Technology Research Grant Program in '05 from the New Energy and Industrial Technology Development Organization (NEDO) of Japan
文摘Nitric oxide （NO） is increasingly being used in medical treatments of high blood pressure, acute respiratory distress syndrome and other illnesses related to the lungs. Currently a NO inhalation system consists of a gas cylinder of N2 mixed with a high concentration of NO. This arrangement is potentially risky due to the possibility of an accidental leak of NO from the cylinder. The presence of NO in the air leads to the formation of nitric dioxide （NO2）, which is toxic to the lungs. Therefore, an on-site generator of NO would be highly desirable for medical doctors to use with patients with lung disease. To develop the NO inhalation system without a gas cylinder, which would include a high concentration of NO, NAMIHIRA et al have recently reported on the production of NO from room air using a pulsed arc discharge. In the present work, the temperature of the pulsed arc discharge plasma used to generate NO was measured to optimize the discharge condition. The results of the temperature measurements showed the temperature of the pulsed arc discharge plasma reached about 10,000 K immediately after discharge initiation and gradually decreased over tens of microseconds. In addition, it was found that NO was formed in a discharge plasma having temperatures higher than 9,000 K and a smaller input energy into the discharge plasma generates NO more efficiently than a larger one.
文摘In agriculture production,plant health is threatened by pathogens parasitic on seeds;hence,it is necessary to disinfect harvested seeds before germination.In this study,a technique of gliding arc plasma treatment was proposed and investigated.The experiment was conducted to treat Astragalus membranaceus(A.membranaceus)seeds that were artificially infected with Fusarium oxysporum(F.oxysporum).The plasma treatment duration varied from 30 s to 270 s.Direct and indirect treatments were compared to evaluate the inactivation efficiency of the F.oxysporum spores on the surface of seeds.The results indicated that the direct treatment behaved significantly better in disinfection than the indirect way.Meanwhile,experiments of the quantitative assessment of seed germination were also conducted,including the germination rate,the germination potential,and the germination index.The results showed that the inactivation efficiency increased as the plasma treatment time was extended.When the treatment time was90 s,the inactivation efficiency reached more than 98%.The plasma treatment of 270 s had a complete devitalization of F.oxysporum spores on the surface of the seeds.After the treatment of 30 s and 90 s,the seed germination parameters improved significantly.This study verified the inactivation efficacy of gliding arc discharge plasma under atmospheric pressure.The technique of gliding arc treatment shows advantages of energy saving and adaptation and has the potential to be utilized in industry.
