Synthetic aperture radar(SAR)aboard SEASAT was first launched in 1978.At the beginning of the 21st century,the Chinese remote sensing community recognized the urgent need to develop domestic SAR capabilities.Unlike sc...Synthetic aperture radar(SAR)aboard SEASAT was first launched in 1978.At the beginning of the 21st century,the Chinese remote sensing community recognized the urgent need to develop domestic SAR capabilities.Unlike scatterometers and al-timeters,space-borne SAR offers high-resolution images of the ocean,regardless of weather conditions or time of day.SAR imagery provides rich information about the sea surface,capturing complicated dynamic processes in the upper layers of the ocean,particular-ly in relation to tropical cyclones.Over the past four decades,the advantages of SAR have been increasingly recognized,leading to notable marine applications,especially in the development of algorithms for retrieving wind and wave data from SAR images.This study reviews the history,progress,and future outlook of SAR-based monitoring of sea surface wind and waves.In particular,the ap-plicability of various SAR wind and wave algorithms is systematically investigated,with a particular focus on their performance un-der extreme sea conditions.展开更多
Dome A,in Antarctica,offers an exceptional site for ground-based infrared astronomy,with its extremely low atmospheric infrared background noise and excellent seeing conditions.However,deploying near-infrared telescop...Dome A,in Antarctica,offers an exceptional site for ground-based infrared astronomy,with its extremely low atmospheric infrared background noise and excellent seeing conditions.However,deploying near-infrared telescopes in the harsh environment of Antarctica faces the critical challenge of frost accumulation on optical mirrors.While indium tin oxide heating films effectively defrost visible-band Antarctic astronomical telescopes,their thermal radiation at infrared wavelengths introduces significant stray light,severely degrading the signal-to-noise ratio for infrared observations.To address this limitation,we have designed a mechanical snow-removal system capable of efficiently clearing frost from sealing window surfaces at temperatures as low as–80°C.Aperture photometry of target sources,Canopus and HD 2151,revealed that after six days without intervention,floating snow extinction reduced target brightness by up to 3 magnitudes.Following mechanical defrosting,the source flux recovered to stable levels,with measured magnitudes showing rapid initial improvement followed by stabilization.Data analysis indicates that a frost removal strategy operating every 48 h,with each operation consisting of 4–6 cycles,enables efficient removal of frost and snow without introducing additional thermal noise.Future work will focus on optimizing the adaptive control algorithm and exploring novel low-temperature defrosting materials to extend the periods during which Antarctic infrared telescopes can operate unattended.展开更多
Nonperiodic interrupted sampling repeater jamming(ISRJ)against inverse synthetic aperture radar(ISAR)can obtain two-dimensional blanket jamming performance by joint fast and slow time domain interrupted modulation,whi...Nonperiodic interrupted sampling repeater jamming(ISRJ)against inverse synthetic aperture radar(ISAR)can obtain two-dimensional blanket jamming performance by joint fast and slow time domain interrupted modulation,which is obviously dif-ferent from the conventional multi-false-target deception jam-ming.In this paper,a suppression method against this kind of novel jamming is proposed based on inter-pulse energy function and compressed sensing theory.By utilizing the discontinuous property of the jamming in slow time domain,the unjammed pulse is separated using the intra-pulse energy function diffe-rence.Based on this,the two-dimensional orthogonal matching pursuit(2D-OMP)algorithm is proposed.Further,it is proposed to reconstruct the ISAR image with the obtained unjammed pulse sequence.The validity of the proposed method is demon-strated via the Yake-42 plane data simulations.展开更多
To realize effective co-phasing adjustment in large-aperture sparse-aperture telescopes,a multichannel stripe tracking approach is employed,allowing simultaneous interferometric measurements of multiple optical paths ...To realize effective co-phasing adjustment in large-aperture sparse-aperture telescopes,a multichannel stripe tracking approach is employed,allowing simultaneous interferometric measurements of multiple optical paths and circumventing the need for pairwise measurements along the mirror boundaries in traditional interferometric methods.This approach enhances detection efficiency and reduces system complexity.Here,the principles of the multibeam interference process and construction of a co-phasing detection module based on direct optical fiber connections were analyzed using wavefront optics theory.Error analysis was conducted on the system surface obtained through multipath interference.Potential applications of the interferometric method were explored.Finally,the principle was verified by experiment,an interferometric fringe contrast better than 0.4 is achieved through flat field calibration and incoherent digital synthesis.The dynamic range of the measurement exceeds 10 times of the center wavelength of the working band(1550 nm).Moreover,a resolution better than one-tenth of the working center wavelength(1550 nm)was achieved.Simultaneous three-beam interference can be achieved,leading to a 50%improvement in detection efficiency.This method can effectively enhance the efficiency of sparse aperture telescope co-phasing,meeting the requirements for observations of 8-10 m telescopes.This study provides a technological foundation for observing distant and faint celestial objects.展开更多
During gas extraction from deep coal,the rock endures high effective stress,with both the time-dependent deformation and anisotropic structure of the rock controlling the permeability evolution.To reveal this phenomen...During gas extraction from deep coal,the rock endures high effective stress,with both the time-dependent deformation and anisotropic structure of the rock controlling the permeability evolution.To reveal this phenomenon,a numerical simulation framework of the finite volume method and transient embedded discrete fracture model is proposed to establish a new constitutive model that links poroelastoplastic deformation,adsorption-induced swelling,and aperture compression.From this model,anisotropic permeability tensors were derived to further achieve the simulation of coevolution.Meanwhile,our permeability model was verified against the measured permeability data,and the history match of the numerical model showed better results where the mismatch was less than 5%.The results indicate that(1)the long-term permeability evolution clearly showed the competitive effects of multiple deformation mechanisms,which involves three stages:compaction-dominated decline,adsorption-dominated rebound,and creep-controlled loss.(2)The increased number of compressible cleats/fractures accelerated the initial permeability decline,while the increased desorption-induced strain promoted faster rebound and enhancement and higher viscosity coefficients enhanced the creep effect,which led to significant long-term permeability loss.(3)Massive hydraulic fracturing created a larger drainage area,accelerating methane desorption and causing sharp permeability rebound with reduced residual gas,which shows that the permeability remained higher than the initial values even after the extensive extraction via the fractured horizontal wells.The permeability evolution mechanisms displayed varying properties,such as coal rank and burial depth,and distinct characteristics.A precise understanding of multiple competitive stress effects is crucial for optimizing coalbed methane extraction techniques and improving recovery efficiency.展开更多
Amplitude stripes imposed by ionospheric scintillation have been frequently observed in many of the equatorial nighttime acquisitions of the Advanced Land Observing Satellite(ALOS)Phased Array-type L-band Synthetic Ap...Amplitude stripes imposed by ionospheric scintillation have been frequently observed in many of the equatorial nighttime acquisitions of the Advanced Land Observing Satellite(ALOS)Phased Array-type L-band Synthetic Aperture Radar(PALSAR).This type of ionospheric artifact impedes PALSAR interferometric and polarimetric applications,and its formation cause,morphology,and negative influence have been deeply investigated.However,this artifact can provide an alternative opportunity in a positive way for probing and measuring ionosphere scintillation.In this paper,a methodology for measuring ionospheric scintillation parameters from PALSAR images with amplitude stripes is proposed.Firstly,sublook processing is beneficial for recovering the scattered stripes from a single-look complex image;the amplitude stripe pattern is extracted via band-rejection filtering in the frequency domain of the sublook image.Secondly,the amplitude spectrum density function(SDF)is estimated from the amplitude stripe pattern.Thirdly,a fitting scheme for measuring the scintillation strength and spectrum index is conducted between the estimated and theoretical long-wavelength SDFs.In addition,another key parameter,the scintillation index,can be directly measured from the amplitude stripe pattern or indirectly derived from the scintillation strength and spectrum index.The proposed methodology is fully demonstrated on two groups of PALSAR acquisitions in the presence of amplitude stripes.Self-validation is conducted by comparing the measured and derived scintillation index and by comparing the measurements of range lines and azimuth lines.Cross-validation is performed by comparing the PALSAR measurements with in situ Global Position System(GPS)measurements.The processing results demonstrate a powerful capability to robustly measure ionospheric scintillation parameters from space with high spatial resolution.展开更多
Synthetic aperture radar(SAR)radio frequency identification(RFID)localization is widely used for automated guided vehicles(AGVs)in the industrial internet of things(IIoT).However,the AGV’s speeds are limited by the p...Synthetic aperture radar(SAR)radio frequency identification(RFID)localization is widely used for automated guided vehicles(AGVs)in the industrial internet of things(IIoT).However,the AGV’s speeds are limited by the phase difference(PD)of two neighboring readers.In this paper,an inertial navigation system(INS)based SAR RFID localization method(ISRL)where AGV moves nonlinearly.To relax the speed limitation,a new phase-unwrapping method based on the similarity of PDs(PU-SPD)is proposed to deal with the PD ambiguity when the AGV speed exceeds 60km/h.In localization,the gauss-newton algorithm(GN)is employed and an initial value estimation scheme based on variable substitution(IVE-VS)is proposed to improve its positioning accuracy and the convergence rate.Thus,ISRL is a combination of IVE-VS and GN.Moreover,the Cramer-Rao lower bound(CRLB)and the speed limitation is derived.Simulation results show that the ISRL can converge after two iterations,and the positioning accuracy can achieve 7.50cm at a phase noise levelσ=0.18,which is 35%better than the Hyperbolic unbiased estimation localization(HyUnb).展开更多
The multifunctional integration system(MFIS)is based on a common hardware platform that controls and regulates the system’s configurable parameters through software to meet dif-ferent operational requirements.Dwell s...The multifunctional integration system(MFIS)is based on a common hardware platform that controls and regulates the system’s configurable parameters through software to meet dif-ferent operational requirements.Dwell scheduling is a key for the system to realize multifunction and maximize the resource uti-lization.In this paper,an adaptive dwell scheduling optimization model for MFIS which considers the aperture partition and joint radar communication(JRC)waveform is established.To solve the formulated optimization problem,JRC scheduling condi-tions are proposed,including time overlapping condition,beam direction condition and aperture condition.Meanwhile,an effec-tive mechanism to dynamically occupy and release the aperture resource is introduced,where the time-pointer will slide to the earliest ending time of all currently scheduled tasks so that the occupied aperture resource can be released timely.Based on them,an adaptive dwell scheduling algorithm for MFIS with aperture partition and JRC waveform is put forward.Simulation results demonstrate that the proposed algorithm has better com-prehensive scheduling performance than up-to-date algorithms in all considered metrics.展开更多
The purpose of this study is to analyze the impact of upper ocean dynamics on velocity bunching,represented by az-imuthal cutoff wavelength(i.e.,sea surface wind,wave,and current).In this study,over 1400 dual-polarize...The purpose of this study is to analyze the impact of upper ocean dynamics on velocity bunching,represented by az-imuthal cutoff wavelength(i.e.,sea surface wind,wave,and current).In this study,over 1400 dual-polarized(vertical-vertical(VV)and vertical-horizontal(VH))Sentinel-1(S-1)synthetic aperture radar(SAR)images collected in tropical cyclones(TC)are utilized.These images are combined with wind and rain observations from the stepped-frequency microwave radiometer(SFMR),wave simu-lations conducted using a third-generation numerical wave model,WAVEWATCH-III(WW3),and SAR-derived wind information collected from CyclObs winds.The WW3-simulated significant wave height(SWH)is validated against measurements from HY-2B altimeter taken in August and September 2021,yielding a root mean square error(RMSE)of 0.48 m and a correlation coefficient(COR)of 0.88.The SAR-based azimuthal cutoff wavelengths in VV polarization,which quantitatively represent the effect of velocity bunching,are compared with theoretical values calculated using WW3-simulated SWH.A notable relationship is observed between the difference in azimuthal cutoff wavelength and SAR-derived wind speed and WW3-simulated SWH.Analysis results show that the correlation between SAR-based azimuthal cutoff wavelength and SWH is stronger than that with wind and current.Finally,a machine learning algorithm is used to develop an algorithm aimed at simulating the azimuthal cutoff wavelength in TCs,including wind,wave,and incidence angle.This method yields an RMSE of 8.90 m,a COR of 0.91,and a scatter index of 0.04 for VV-polar-ization SAR.展开更多
As same as the conventional inverse synthetic aperture radar（ISAR）, the compressed ISAR also requires the echo signal based motion compensation, which consists of the range alignment and the phase autofoeusing. A ph...As same as the conventional inverse synthetic aperture radar（ISAR）, the compressed ISAR also requires the echo signal based motion compensation, which consists of the range alignment and the phase autofoeusing. A phase autofocusing algorithm for compressed ISAR imaging is presented. In the algorithm, phase autofocusing for the sparse ISAR echoes is accomplished using the eigenvector method. Experimental results validate the effectiveness of the algorithm.展开更多
We experimentally studied the effect of crack aperture on P-wave velocity, amplitude, anisotropy and dispersion. Experimental models were constructed based on Hudson＇s theory. Six crack models were embedded with equa...We experimentally studied the effect of crack aperture on P-wave velocity, amplitude, anisotropy and dispersion. Experimental models were constructed based on Hudson＇s theory. Six crack models were embedded with equal-radius penny-shaped crack inclusions in each layer. The P-wave velocity and amplitude were measured parallel and perpendicular to the layers of cracks at frequencies of 0.1 MHz to 1 MHz. The experiments show that as the crack aperture increases from 0.l mm to 0.34 mm, the amplitude of the P-waves parallel to the crack layers decreases linearly with increasing frequency and the P-wave velocity dispersion varies from 1.5% to 2.1%, whereas the amplitude of the P-wave perpendicular to the crack layers decreases quadratically with increasing frequency and the velocity dispersion varies from 1.9% to 4.7%. The variation in the velocity dispersion parallel and perpendicular to the cracks intensifies the anisotropy dispersion of the P-waves in the crack models （6.7% to 83%）. The P-wave dispersion strongly depends on the scattering characteristics of the crack apertures.展开更多
A windowed very small aperture laser (VSAL) source for use in high resolution near field optical data storage is fabricated.The windowed regions are introduced to avoid shorting the pn junction with metal coating a...A windowed very small aperture laser (VSAL) source for use in high resolution near field optical data storage is fabricated.The windowed regions are introduced to avoid shorting the pn junction with metal coating and suppress the COD effect.It facilitates producing VSAL by simplified technology and improves the laser performance.A VSAL with 400nm small aperture is demonstrated by focused ion beam (FIB) and the output power is 0 3mW at 31mA.展开更多
Landslide susceptibility mapping(LSM)is an essential tool for mitigating the escalating global risk of landslides.However,challenges such as the heterogeneity of different landslide triggers,extensive engineering acti...Landslide susceptibility mapping(LSM)is an essential tool for mitigating the escalating global risk of landslides.However,challenges such as the heterogeneity of different landslide triggers,extensive engineering activities exacerbated reactivation,and the interpretability of data-driven models have hindered the practical application of LSM.This work proposes a novel framework for enhancing LSM considering different triggers for accumulation and rock landslides,leveraging interpretable machine learning and Multi-temporal Interferometric Synthetic Aperture Radar(MT-InSAR)technology.Initially,a refined fieldinvestigation was conducted to delineate the accumulation and rock area according to landslide types,leading to the identificationof relevant contributing factors.Deformation along the slope was then combined with time-series analysis to derive a landslide activity level(AL)index to recognize the likelihood of reactivation or dormancy.The SHapley Additive exPlanation(SHAP)technique facilitated the interpretation of factors and the identificationof determinants in high susceptibility areas.The results indicate that random forest(RF)outperformed other models in both accumulation and rock areas.Key factors including thickness and weak intercalation were identifiedfor accumulation and rock landslides.The introduction of AL substantially enhanced the predictive capability of the LSM and outperformed models that neglect movement trends or deformation rates with an average ratio of 81.23%in high susceptibility zones.Besides,the fieldvalidation confirmedthat 83.8%of newly identifiedlandslides were correctly upgraded.Given its efficiencyand operational simplicity,the proposed hybrid model opens new avenues for the feasibility of enhancement in LSM at urban settlements worldwide.展开更多
Bathymetric measurement of shallow water is of fundamental importance to coastal environment research and resource management.However,there are still great challenges in estimating water depth using satellite observat...Bathymetric measurement of shallow water is of fundamental importance to coastal environment research and resource management.However,there are still great challenges in estimating water depth using satellite observations in turbid coastal waters.In this paper,we developed a physicsenhanced deep neural network to estimate bathymetry of highly turbid waters of the Changjiang(Yangtze)River estuary from dual-polarized synthetic aperture radar(SAR)images.Sentinel-1A/B SAR images with a spatial resolution of 20 m×22 m were collected and matched with water depth data from nautical charts during 2017-2023.For the input parameters of the model,in addition to the normalized radar backscatter cross section(NRCS)at single polarization and incidence angle,the impacts of both polarimetric characteristics and physical environmental factors on model performance were discussed in detail.Results of feature importance analysis and sensitivity experiments indicate that the polarization ratio and NRCS after removing the influence of background sea surface wind field make significant contributions to the bathymetry retrieval model.The root mean square error(RMSE)of SAR derived water depth decreases from 1.44 to 0.78 m within 0-30-m depth,and the mean relative error(MRE)is reduced from 15.6%to 8.6%.Compared with other machine learning models such as ResNet,XGBoost,and Random Forest,the MRE is reduced by 3.9%,5.7%,and 7.4%,respectively.The spatial distribution of SAR derived water depth also exhibits a high degree of consistency with observations,demonstrating the great potential of the model in estimating the depth of turbid shallow waters.展开更多
The 12 May 2008 Wenchuan Ms8.0 earthquake produced surface displacements along the causative fault, the Yingxiu-Beichuan Fault, which are up to several meters near the fault. Because of the large gradient, satellite s...The 12 May 2008 Wenchuan Ms8.0 earthquake produced surface displacements along the causative fault, the Yingxiu-Beichuan Fault, which are up to several meters near the fault. Because of the large gradient, satellite synthetic aperture radar （SAR） interferometric data are strongly incoherent; the usual SAR interferometry method does not allow such displacements to be measured. In the present study, we employed another approach, the technique based on pixel offset tracking, to solve this problem. The used image data of six tracks are from the Advanced Land Observing Satellite, Phased Array type L-band Synthetic Aperture Radar （ALOS/PALSAR） dataset of Japan. The results show that the entire surface rupture belt is 238 km long, extending almost linearly in a direction of 42°north-east. It is offset left laterally by a north-west-striking fault at Xiaoyudong, and turns at Gaochuan, where the rupture belt shifts toward the south by 5 km, largely keeping the original trend. In terms of the features of the rupture traces, the rupture belt can be divided into five sections and three types. Among them, the Beichuan-Chaping and Hongkou-Yingxiu sections are relatively complex, with large widths and variable traces along the trend. The Pingtong-Nanba and Qingping-Jingtang sections appear uniform, characterized by straight traces and small widths. West of Yingxiu, the rupture traces are not clear. North of the rupture belt, surface displacements are 2.95 m on average, mostly 2-3.5 m, with 7-9 m the maximum near Beichuan. South of the rupture belt, the average displacement is 1.75 m, dominated by 1-2 m, with 3-4 m at a few sites. In the north, the displacements in the radar line of sight are of subsidence, and in the south, they are uplifted, in accordance with a right-slip motion that moves the northern wall of the fault to the east, and the southern wall to the west, respectively. Along the Guanxian-Jiangyou Fault, there is a uplift zone in the radar line of sight, which is 66 km long, 1.5-6 km wide, and has vertical displacements of approximately 2 m, but no observable rupture traces.展开更多
Radio frequency interference（RFI） is becoming more and more frequently, which makes it an important issue in SAR imaging.RFI presented in synthetic aperture radar either on purpose or inadvertent will distort the us...Radio frequency interference（RFI） is becoming more and more frequently, which makes it an important issue in SAR imaging.RFI presented in synthetic aperture radar either on purpose or inadvertent will distort the useful SAR echoes, thus degrade the SAR image quality.To resolve this issue, a long time study was carried out to study the characteristic of the RFI through the RFIaffected spaceborne and airborne SAR data.Based on the narrow band nature of RFI, this paper proposes a new process which contains both RFI detection and RFI suppression.A useful subband spectral kurtosis detector is first used to detect RFI, and then its results are used for RFI suppression.The proposed process has two advantages： one is the economization on the compute time for unnecessary interference suppression when no RFI existed; the other is improving the performance of the suppression method with knowing the exact position where RFI is.Moreover, the previous RFI suppression method––subband spectral cancelation（SSC） is supplemented and perfected.The subband division step is also elaborated detail in this paper.The experiment results show that the subband spectral kurtosis detector exhibits good performance in recognizing both weak and narrow-band RFI.In addition, the validity of the SSC method with subband spectral kurtosis detector is also validated on the real SAR echoes.展开更多
On 21 May 2021(UTC),an MW 7.4 earthquake jolted the east Bayan Har block in the Tibetan Plateau.The earthquake received widespread attention as it is the largest event in the Tibetan Plateau and its surroundings since...On 21 May 2021(UTC),an MW 7.4 earthquake jolted the east Bayan Har block in the Tibetan Plateau.The earthquake received widespread attention as it is the largest event in the Tibetan Plateau and its surroundings since the 2008 Wenchuan earthquake,and especially in proximity to the seismic gaps on the east Kunlun fault.Here we use satellite interferometric synthetic aperture radar data and subpixel offset observations along the range directions to characterize the coseismic deformation of the earthquake.Range offset displacements depict clear surface ruptures with a total length of~170 km involving two possible activated fault segments in the earthquake.Coseismic modeling results indicate that the earthquake was dominated by left-lateral strike-slip motions of up to 7 m within the top 12 km of the crust.The well-resolved slip variations are characterized by five major slip patches along strike and 64%of shallow slip deficit,suggesting a young seismogenic structure.Spatial-temporal changes of the postseismic deformation are mapped from early 6-day and 24-day InSAR observations,and are well explained by time-dependent afterslip models.Analysis of Global Navigation Satellite System(GNSS)velocity profiles and strain rates suggests that the eastward extrusion of plateau is diffusely distributed across the east Bayan Har block,but exhibits significant lateral heterogeneities,as evidenced by magnetotelluric observations.The block-wide distributed deformation of the east Bayan Har block along with the significant co-and post-seismic stress loadings from the Madoi earthquake imply high seismic risks along regional faults,especially the Tuosuo Lake and Maqên-Maqu segments of the Kunlun fault that are known as seismic gaps.展开更多
基金supported by the National Nat-ural Science Foundation of China(No.42376174)the Natural Science Foundation of Shanghai(No.23ZR 1426900).
文摘Synthetic aperture radar(SAR)aboard SEASAT was first launched in 1978.At the beginning of the 21st century,the Chinese remote sensing community recognized the urgent need to develop domestic SAR capabilities.Unlike scatterometers and al-timeters,space-borne SAR offers high-resolution images of the ocean,regardless of weather conditions or time of day.SAR imagery provides rich information about the sea surface,capturing complicated dynamic processes in the upper layers of the ocean,particular-ly in relation to tropical cyclones.Over the past four decades,the advantages of SAR have been increasingly recognized,leading to notable marine applications,especially in the development of algorithms for retrieving wind and wave data from SAR images.This study reviews the history,progress,and future outlook of SAR-based monitoring of sea surface wind and waves.In particular,the ap-plicability of various SAR wind and wave algorithms is systematically investigated,with a particular focus on their performance un-der extreme sea conditions.
基金supported by the Space Debris Research Project,China(KJSP2020010102)the National Key R&D Program of China(2022YFC2807300)the National Natural Science Foundation of China(12573081)。
文摘Dome A,in Antarctica,offers an exceptional site for ground-based infrared astronomy,with its extremely low atmospheric infrared background noise and excellent seeing conditions.However,deploying near-infrared telescopes in the harsh environment of Antarctica faces the critical challenge of frost accumulation on optical mirrors.While indium tin oxide heating films effectively defrost visible-band Antarctic astronomical telescopes,their thermal radiation at infrared wavelengths introduces significant stray light,severely degrading the signal-to-noise ratio for infrared observations.To address this limitation,we have designed a mechanical snow-removal system capable of efficiently clearing frost from sealing window surfaces at temperatures as low as–80°C.Aperture photometry of target sources,Canopus and HD 2151,revealed that after six days without intervention,floating snow extinction reduced target brightness by up to 3 magnitudes.Following mechanical defrosting,the source flux recovered to stable levels,with measured magnitudes showing rapid initial improvement followed by stabilization.Data analysis indicates that a frost removal strategy operating every 48 h,with each operation consisting of 4–6 cycles,enables efficient removal of frost and snow without introducing additional thermal noise.Future work will focus on optimizing the adaptive control algorithm and exploring novel low-temperature defrosting materials to extend the periods during which Antarctic infrared telescopes can operate unattended.
基金supported by the National Natural Science Foundation of China(62001481,61890542,62071475)the Natural Science Foundation of Hunan Province(2022JJ40561)the Research Program of National University of Defense Technology(ZK22-46).
文摘Nonperiodic interrupted sampling repeater jamming(ISRJ)against inverse synthetic aperture radar(ISAR)can obtain two-dimensional blanket jamming performance by joint fast and slow time domain interrupted modulation,which is obviously dif-ferent from the conventional multi-false-target deception jam-ming.In this paper,a suppression method against this kind of novel jamming is proposed based on inter-pulse energy function and compressed sensing theory.By utilizing the discontinuous property of the jamming in slow time domain,the unjammed pulse is separated using the intra-pulse energy function diffe-rence.Based on this,the two-dimensional orthogonal matching pursuit(2D-OMP)algorithm is proposed.Further,it is proposed to reconstruct the ISAR image with the obtained unjammed pulse sequence.The validity of the proposed method is demon-strated via the Yake-42 plane data simulations.
文摘To realize effective co-phasing adjustment in large-aperture sparse-aperture telescopes,a multichannel stripe tracking approach is employed,allowing simultaneous interferometric measurements of multiple optical paths and circumventing the need for pairwise measurements along the mirror boundaries in traditional interferometric methods.This approach enhances detection efficiency and reduces system complexity.Here,the principles of the multibeam interference process and construction of a co-phasing detection module based on direct optical fiber connections were analyzed using wavefront optics theory.Error analysis was conducted on the system surface obtained through multipath interference.Potential applications of the interferometric method were explored.Finally,the principle was verified by experiment,an interferometric fringe contrast better than 0.4 is achieved through flat field calibration and incoherent digital synthesis.The dynamic range of the measurement exceeds 10 times of the center wavelength of the working band(1550 nm).Moreover,a resolution better than one-tenth of the working center wavelength(1550 nm)was achieved.Simultaneous three-beam interference can be achieved,leading to a 50%improvement in detection efficiency.This method can effectively enhance the efficiency of sparse aperture telescope co-phasing,meeting the requirements for observations of 8-10 m telescopes.This study provides a technological foundation for observing distant and faint celestial objects.
基金support of the National Natural Science Foundation of China(U23B6004 and 52404045)the CAST Young Talent Support Program,Doctoral Student Special Project.
文摘During gas extraction from deep coal,the rock endures high effective stress,with both the time-dependent deformation and anisotropic structure of the rock controlling the permeability evolution.To reveal this phenomenon,a numerical simulation framework of the finite volume method and transient embedded discrete fracture model is proposed to establish a new constitutive model that links poroelastoplastic deformation,adsorption-induced swelling,and aperture compression.From this model,anisotropic permeability tensors were derived to further achieve the simulation of coevolution.Meanwhile,our permeability model was verified against the measured permeability data,and the history match of the numerical model showed better results where the mismatch was less than 5%.The results indicate that(1)the long-term permeability evolution clearly showed the competitive effects of multiple deformation mechanisms,which involves three stages:compaction-dominated decline,adsorption-dominated rebound,and creep-controlled loss.(2)The increased number of compressible cleats/fractures accelerated the initial permeability decline,while the increased desorption-induced strain promoted faster rebound and enhancement and higher viscosity coefficients enhanced the creep effect,which led to significant long-term permeability loss.(3)Massive hydraulic fracturing created a larger drainage area,accelerating methane desorption and causing sharp permeability rebound with reduced residual gas,which shows that the permeability remained higher than the initial values even after the extensive extraction via the fractured horizontal wells.The permeability evolution mechanisms displayed varying properties,such as coal rank and burial depth,and distinct characteristics.A precise understanding of multiple competitive stress effects is crucial for optimizing coalbed methane extraction techniques and improving recovery efficiency.
基金supported partly by the National Natural Science Foundation of China(NSFC)(62101568 and 62371460)the Scientific Research Program of the National University of Defense Technology(ZK21-06)the Taishan Scholars of Shandong Province(ts20190968)。
文摘Amplitude stripes imposed by ionospheric scintillation have been frequently observed in many of the equatorial nighttime acquisitions of the Advanced Land Observing Satellite(ALOS)Phased Array-type L-band Synthetic Aperture Radar(PALSAR).This type of ionospheric artifact impedes PALSAR interferometric and polarimetric applications,and its formation cause,morphology,and negative influence have been deeply investigated.However,this artifact can provide an alternative opportunity in a positive way for probing and measuring ionosphere scintillation.In this paper,a methodology for measuring ionospheric scintillation parameters from PALSAR images with amplitude stripes is proposed.Firstly,sublook processing is beneficial for recovering the scattered stripes from a single-look complex image;the amplitude stripe pattern is extracted via band-rejection filtering in the frequency domain of the sublook image.Secondly,the amplitude spectrum density function(SDF)is estimated from the amplitude stripe pattern.Thirdly,a fitting scheme for measuring the scintillation strength and spectrum index is conducted between the estimated and theoretical long-wavelength SDFs.In addition,another key parameter,the scintillation index,can be directly measured from the amplitude stripe pattern or indirectly derived from the scintillation strength and spectrum index.The proposed methodology is fully demonstrated on two groups of PALSAR acquisitions in the presence of amplitude stripes.Self-validation is conducted by comparing the measured and derived scintillation index and by comparing the measurements of range lines and azimuth lines.Cross-validation is performed by comparing the PALSAR measurements with in situ Global Position System(GPS)measurements.The processing results demonstrate a powerful capability to robustly measure ionospheric scintillation parameters from space with high spatial resolution.
基金supported by the National Natural Science Foundation of China under Grant U21A20449The Zhongguancun Project under Grant 23120035.
文摘Synthetic aperture radar(SAR)radio frequency identification(RFID)localization is widely used for automated guided vehicles(AGVs)in the industrial internet of things(IIoT).However,the AGV’s speeds are limited by the phase difference(PD)of two neighboring readers.In this paper,an inertial navigation system(INS)based SAR RFID localization method(ISRL)where AGV moves nonlinearly.To relax the speed limitation,a new phase-unwrapping method based on the similarity of PDs(PU-SPD)is proposed to deal with the PD ambiguity when the AGV speed exceeds 60km/h.In localization,the gauss-newton algorithm(GN)is employed and an initial value estimation scheme based on variable substitution(IVE-VS)is proposed to improve its positioning accuracy and the convergence rate.Thus,ISRL is a combination of IVE-VS and GN.Moreover,the Cramer-Rao lower bound(CRLB)and the speed limitation is derived.Simulation results show that the ISRL can converge after two iterations,and the positioning accuracy can achieve 7.50cm at a phase noise levelσ=0.18,which is 35%better than the Hyperbolic unbiased estimation localization(HyUnb).
基金supported by the National Natural Science Foundation of China(6203100762371093).
文摘The multifunctional integration system(MFIS)is based on a common hardware platform that controls and regulates the system’s configurable parameters through software to meet dif-ferent operational requirements.Dwell scheduling is a key for the system to realize multifunction and maximize the resource uti-lization.In this paper,an adaptive dwell scheduling optimization model for MFIS which considers the aperture partition and joint radar communication(JRC)waveform is established.To solve the formulated optimization problem,JRC scheduling condi-tions are proposed,including time overlapping condition,beam direction condition and aperture condition.Meanwhile,an effec-tive mechanism to dynamically occupy and release the aperture resource is introduced,where the time-pointer will slide to the earliest ending time of all currently scheduled tasks so that the occupied aperture resource can be released timely.Based on them,an adaptive dwell scheduling algorithm for MFIS with aperture partition and JRC waveform is put forward.Simulation results demonstrate that the proposed algorithm has better com-prehensive scheduling performance than up-to-date algorithms in all considered metrics.
基金supported by the National Natural Science Foundation of China(Nos.42076238,42376174)the Natural Science Foundation of Shanghai(No.23ZR1426900).
文摘The purpose of this study is to analyze the impact of upper ocean dynamics on velocity bunching,represented by az-imuthal cutoff wavelength(i.e.,sea surface wind,wave,and current).In this study,over 1400 dual-polarized(vertical-vertical(VV)and vertical-horizontal(VH))Sentinel-1(S-1)synthetic aperture radar(SAR)images collected in tropical cyclones(TC)are utilized.These images are combined with wind and rain observations from the stepped-frequency microwave radiometer(SFMR),wave simu-lations conducted using a third-generation numerical wave model,WAVEWATCH-III(WW3),and SAR-derived wind information collected from CyclObs winds.The WW3-simulated significant wave height(SWH)is validated against measurements from HY-2B altimeter taken in August and September 2021,yielding a root mean square error(RMSE)of 0.48 m and a correlation coefficient(COR)of 0.88.The SAR-based azimuthal cutoff wavelengths in VV polarization,which quantitatively represent the effect of velocity bunching,are compared with theoretical values calculated using WW3-simulated SWH.A notable relationship is observed between the difference in azimuthal cutoff wavelength and SAR-derived wind speed and WW3-simulated SWH.Analysis results show that the correlation between SAR-based azimuthal cutoff wavelength and SWH is stronger than that with wind and current.Finally,a machine learning algorithm is used to develop an algorithm aimed at simulating the azimuthal cutoff wavelength in TCs,including wind,wave,and incidence angle.This method yields an RMSE of 8.90 m,a COR of 0.91,and a scatter index of 0.04 for VV-polar-ization SAR.
基金Supported by the National Natural Science Foundation of China(61071165)the Program for NewCentury Excellent Talents in University(NCET-09-0069)the Defense Industrial Technology Development Program(B2520110008)~~
文摘As same as the conventional inverse synthetic aperture radar（ISAR）, the compressed ISAR also requires the echo signal based motion compensation, which consists of the range alignment and the phase autofoeusing. A phase autofocusing algorithm for compressed ISAR imaging is presented. In the algorithm, phase autofocusing for the sparse ISAR echoes is accomplished using the eigenvector method. Experimental results validate the effectiveness of the algorithm.
基金supported by the Major National Project Program (No.2011ZX05007-006)
文摘We experimentally studied the effect of crack aperture on P-wave velocity, amplitude, anisotropy and dispersion. Experimental models were constructed based on Hudson＇s theory. Six crack models were embedded with equal-radius penny-shaped crack inclusions in each layer. The P-wave velocity and amplitude were measured parallel and perpendicular to the layers of cracks at frequencies of 0.1 MHz to 1 MHz. The experiments show that as the crack aperture increases from 0.l mm to 0.34 mm, the amplitude of the P-waves parallel to the crack layers decreases linearly with increasing frequency and the P-wave velocity dispersion varies from 1.5% to 2.1%, whereas the amplitude of the P-wave perpendicular to the crack layers decreases quadratically with increasing frequency and the velocity dispersion varies from 1.9% to 4.7%. The variation in the velocity dispersion parallel and perpendicular to the cracks intensifies the anisotropy dispersion of the P-waves in the crack models （6.7% to 83%）. The P-wave dispersion strongly depends on the scattering characteristics of the crack apertures.
文摘A windowed very small aperture laser (VSAL) source for use in high resolution near field optical data storage is fabricated.The windowed regions are introduced to avoid shorting the pn junction with metal coating and suppress the COD effect.It facilitates producing VSAL by simplified technology and improves the laser performance.A VSAL with 400nm small aperture is demonstrated by focused ion beam (FIB) and the output power is 0 3mW at 31mA.
基金supported by the National Key R&D Program of China(Grant No.2023YFC3007201)the National Natural Science Foundation of China(Grant No.42377161)the Opening Fund of Key Laboratory of Geological Survey and Evaluation of Ministry of Education(Grant No.GLAB 2024ZR03).
文摘Landslide susceptibility mapping(LSM)is an essential tool for mitigating the escalating global risk of landslides.However,challenges such as the heterogeneity of different landslide triggers,extensive engineering activities exacerbated reactivation,and the interpretability of data-driven models have hindered the practical application of LSM.This work proposes a novel framework for enhancing LSM considering different triggers for accumulation and rock landslides,leveraging interpretable machine learning and Multi-temporal Interferometric Synthetic Aperture Radar(MT-InSAR)technology.Initially,a refined fieldinvestigation was conducted to delineate the accumulation and rock area according to landslide types,leading to the identificationof relevant contributing factors.Deformation along the slope was then combined with time-series analysis to derive a landslide activity level(AL)index to recognize the likelihood of reactivation or dormancy.The SHapley Additive exPlanation(SHAP)technique facilitated the interpretation of factors and the identificationof determinants in high susceptibility areas.The results indicate that random forest(RF)outperformed other models in both accumulation and rock areas.Key factors including thickness and weak intercalation were identifiedfor accumulation and rock landslides.The introduction of AL substantially enhanced the predictive capability of the LSM and outperformed models that neglect movement trends or deformation rates with an average ratio of 81.23%in high susceptibility zones.Besides,the fieldvalidation confirmedthat 83.8%of newly identifiedlandslides were correctly upgraded.Given its efficiencyand operational simplicity,the proposed hybrid model opens new avenues for the feasibility of enhancement in LSM at urban settlements worldwide.
基金Supported by the National Natural Science Foundation of China(Nos.T2261149752,41976163,42476172)。
文摘Bathymetric measurement of shallow water is of fundamental importance to coastal environment research and resource management.However,there are still great challenges in estimating water depth using satellite observations in turbid coastal waters.In this paper,we developed a physicsenhanced deep neural network to estimate bathymetry of highly turbid waters of the Changjiang(Yangtze)River estuary from dual-polarized synthetic aperture radar(SAR)images.Sentinel-1A/B SAR images with a spatial resolution of 20 m×22 m were collected and matched with water depth data from nautical charts during 2017-2023.For the input parameters of the model,in addition to the normalized radar backscatter cross section(NRCS)at single polarization and incidence angle,the impacts of both polarimetric characteristics and physical environmental factors on model performance were discussed in detail.Results of feature importance analysis and sensitivity experiments indicate that the polarization ratio and NRCS after removing the influence of background sea surface wind field make significant contributions to the bathymetry retrieval model.The root mean square error(RMSE)of SAR derived water depth decreases from 1.44 to 0.78 m within 0-30-m depth,and the mean relative error(MRE)is reduced from 15.6%to 8.6%.Compared with other machine learning models such as ResNet,XGBoost,and Random Forest,the MRE is reduced by 3.9%,5.7%,and 7.4%,respectively.The spatial distribution of SAR derived water depth also exhibits a high degree of consistency with observations,demonstrating the great potential of the model in estimating the depth of turbid shallow waters.
基金supported by the State Key Laboratory of Earthquake Dynamics,Institute of Geology,China Earthquake Administration(CEA) (no. LED2010A02,LED2008A06)
文摘The 12 May 2008 Wenchuan Ms8.0 earthquake produced surface displacements along the causative fault, the Yingxiu-Beichuan Fault, which are up to several meters near the fault. Because of the large gradient, satellite synthetic aperture radar （SAR） interferometric data are strongly incoherent; the usual SAR interferometry method does not allow such displacements to be measured. In the present study, we employed another approach, the technique based on pixel offset tracking, to solve this problem. The used image data of six tracks are from the Advanced Land Observing Satellite, Phased Array type L-band Synthetic Aperture Radar （ALOS/PALSAR） dataset of Japan. The results show that the entire surface rupture belt is 238 km long, extending almost linearly in a direction of 42°north-east. It is offset left laterally by a north-west-striking fault at Xiaoyudong, and turns at Gaochuan, where the rupture belt shifts toward the south by 5 km, largely keeping the original trend. In terms of the features of the rupture traces, the rupture belt can be divided into five sections and three types. Among them, the Beichuan-Chaping and Hongkou-Yingxiu sections are relatively complex, with large widths and variable traces along the trend. The Pingtong-Nanba and Qingping-Jingtang sections appear uniform, characterized by straight traces and small widths. West of Yingxiu, the rupture traces are not clear. North of the rupture belt, surface displacements are 2.95 m on average, mostly 2-3.5 m, with 7-9 m the maximum near Beichuan. South of the rupture belt, the average displacement is 1.75 m, dominated by 1-2 m, with 3-4 m at a few sites. In the north, the displacements in the radar line of sight are of subsidence, and in the south, they are uplifted, in accordance with a right-slip motion that moves the northern wall of the fault to the east, and the southern wall to the west, respectively. Along the Guanxian-Jiangyou Fault, there is a uplift zone in the radar line of sight, which is 66 km long, 1.5-6 km wide, and has vertical displacements of approximately 2 m, but no observable rupture traces.
基金co-supported by the China Postdoctoral Science Foundation (No.2013M541035)the National Natural Science Foundation of China (No.61301025)
文摘Radio frequency interference（RFI） is becoming more and more frequently, which makes it an important issue in SAR imaging.RFI presented in synthetic aperture radar either on purpose or inadvertent will distort the useful SAR echoes, thus degrade the SAR image quality.To resolve this issue, a long time study was carried out to study the characteristic of the RFI through the RFIaffected spaceborne and airborne SAR data.Based on the narrow band nature of RFI, this paper proposes a new process which contains both RFI detection and RFI suppression.A useful subband spectral kurtosis detector is first used to detect RFI, and then its results are used for RFI suppression.The proposed process has two advantages： one is the economization on the compute time for unnecessary interference suppression when no RFI existed; the other is improving the performance of the suppression method with knowing the exact position where RFI is.Moreover, the previous RFI suppression method––subband spectral cancelation（SSC） is supplemented and perfected.The subband division step is also elaborated detail in this paper.The experiment results show that the subband spectral kurtosis detector exhibits good performance in recognizing both weak and narrow-band RFI.In addition, the validity of the SSC method with subband spectral kurtosis detector is also validated on the real SAR echoes.
基金supported by the Natural Science Foundation of Jiangsu Province(Grant No.SBK2020043202)by Key Laboratory of Geospace Environment and Geodesy,Ministry of Education,Wuhan University(No.19-01-08).
文摘On 21 May 2021(UTC),an MW 7.4 earthquake jolted the east Bayan Har block in the Tibetan Plateau.The earthquake received widespread attention as it is the largest event in the Tibetan Plateau and its surroundings since the 2008 Wenchuan earthquake,and especially in proximity to the seismic gaps on the east Kunlun fault.Here we use satellite interferometric synthetic aperture radar data and subpixel offset observations along the range directions to characterize the coseismic deformation of the earthquake.Range offset displacements depict clear surface ruptures with a total length of~170 km involving two possible activated fault segments in the earthquake.Coseismic modeling results indicate that the earthquake was dominated by left-lateral strike-slip motions of up to 7 m within the top 12 km of the crust.The well-resolved slip variations are characterized by five major slip patches along strike and 64%of shallow slip deficit,suggesting a young seismogenic structure.Spatial-temporal changes of the postseismic deformation are mapped from early 6-day and 24-day InSAR observations,and are well explained by time-dependent afterslip models.Analysis of Global Navigation Satellite System(GNSS)velocity profiles and strain rates suggests that the eastward extrusion of plateau is diffusely distributed across the east Bayan Har block,but exhibits significant lateral heterogeneities,as evidenced by magnetotelluric observations.The block-wide distributed deformation of the east Bayan Har block along with the significant co-and post-seismic stress loadings from the Madoi earthquake imply high seismic risks along regional faults,especially the Tuosuo Lake and Maqên-Maqu segments of the Kunlun fault that are known as seismic gaps.
