To investigate the spatiotemporal variations in the mixed layer depth(MLD)in the Arctic basins,a new criterion to determine the MLD,called the improved maximum angle method(IMAM),was developed.A total of 45123 potenti...To investigate the spatiotemporal variations in the mixed layer depth(MLD)in the Arctic basins,a new criterion to determine the MLD,called the improved maximum angle method(IMAM),was developed.A total of 45123 potential density profiles collected using Ice-Tethered Profilers(ITPs)in the Arctic basins during 2005-2021 were used to demonstrate the method’s effectiveness.By comparing the results obtained by the fixed threshold method(FTM),percentage threshold method(PTM),and maximum gradient method(MGM)for profiles in the Canada Basin,Makarov Basin,and Eurasian Basin,we determined that the quality index(1.0 for perfect identification of the MLD)of the IMAM regarding the assessment of the MLD determination method reached 0.94,which is much greater than those of other criteria.Moreover,two types of the density profiles were identified based on the mixed layer development stage.The MLDs of the typical profiles determined using the IMAM were found to have better consistency with the original definition.By utilizing the new mixed layer criterion,the seasonal variations and regional differences in the MLD in the Arctic basins were analyzed.Spatially,the summer and winter MLDs in the Canada Basin were the shallowest(13.55 m in summer,26.76 m in winter)than those in the Makarov(29.51 m in summer,49.08 m in winter)and Eurasian(20.36 m in summer,46.81 m in winter)basins due to the stable stratification in the upper ocean and the subsequent small effects of dynamic and thermodynamic processes(wind-driven stirring and brine rejection)in the Canada Basin.Seasonally,in the three Arctic basins,the average MLD was shallowest(22.77 m)in summer;it deepened through autumn and reached a winter maximum(41.12 m).展开更多
In order to enhance the bearing capacity of non-circular gear pair, the non-circular gear pair with double generating angles is proposed based on the design idea of unsymmetrical gear with double pressure angles. The ...In order to enhance the bearing capacity of non-circular gear pair, the non-circular gear pair with double generating angles is proposed based on the design idea of unsymmetrical gear with double pressure angles. The tooth profile is designed by generating cutting theory, the pure rolling mathematic model that the center line of unsymmetrical rack roll along non-circular pitch curve is built, the digital model of non-circular gear with double generating angles is created through the second development method of CAD software, and then the drive characteristic and tooth strength are analyzed. The results show that the design method for double generating angles non-circular gear proposed in this paper is feasible, which is significant to improve the bearing capacity of non-circular gear pair.展开更多
A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has ...A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has robustness to uncertainty of frequency, which makes it practical in engineering. Several time optimal and time-fuel optimal control strategies are designed for a kind of single flexible link. Simulation results validate the feasibility of our method.展开更多
We introduce a new interpretation and quantitative method for computerized diplopia test. By comparing this new method to the Hess screen test, we validate its applicability among 304 patients with ocular motor nerve ...We introduce a new interpretation and quantitative method for computerized diplopia test. By comparing this new method to the Hess screen test, we validate its applicability among 304 patients with ocular motor nerve palsy. This new method shows great assistant value as the Hess screen test in making accurate diagnosis and quantitative evaluation the severity of diplopia. Furthermore, it is more convenient and suitable for daily clinical use.展开更多
The lightning accidents still occurred frequently in facilities protected by the protective angle method.After years of research,the expert team of the China Lightning Science(Jindun)Industry-University-Research Insti...The lightning accidents still occurred frequently in facilities protected by the protective angle method.After years of research,the expert team of the China Lightning Science(Jindun)Industry-University-Research Institute Collaboration Base has redefined the working principle of lightning rods,developed a new type of lightning rod(lightning interceptor),proposed a new theory of regional lightning protection,and established an engineering technology method for regional lightning protection(semi-circular method).Significant results have been achieved in multiple professional fields.In this paper,the research and application effects of lightning rods and protection angle method,regional lightning protection theory,and semi-circular method are introduced,which can be used as a reference for relevant technical personnel.展开更多
Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invent...Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invented the lightning rod in 1752,lightning rods have been used worldwide to prevent direct lightning strikes in various fields such as high-voltage power transmission lines,outdoor chemical sites,highways,land and sea wind farms,and forest lightning fire protection.It has been proven that lightning accidents still occur frequently in places where lightning rods are installed and the protective angle method is used.In order to further study the protective effect of lightning rods and identify the shortcomings of lightning rod protection,negative lightning strikes are taken as the research object,to analyze the limitations of lightning rods in preventing direct lightning strikes from the working principle of lightning rods.展开更多
For discrimination of the common W-junction and Y-junction in the labels of line drawing for a three-dimensional manifold plane surface with trihedral vertices, the existing algorithms are almost using angles between ...For discrimination of the common W-junction and Y-junction in the labels of line drawing for a three-dimensional manifold plane surface with trihedral vertices, the existing algorithms are almost using angles between two adjacent lines and W-junction and Y- junction＇s definitions, and other complex methods. This passage gives four methods with their detailed mathematical inference processes in order to use these algorithms implemented by computer. The algorithms listed are Angle Summation method and Points to the Line method, Triangle methods which are the Triangle Area method and the Cross method. When the computer programs discriminate junctions, by comparison, the Angle Summation method and Points to the Line method are less efficacious than the Triangle method, and Cross method is more efficacious than the Triangle Area method in the Triangle method.展开更多
An improved method of angle measurement is proposed based on a parallel plate interferometer. A position detection system is incorporated into a parallel plate interferometer in order to realize large deflection angle...An improved method of angle measurement is proposed based on a parallel plate interferometer. A position detection system is incorporated into a parallel plate interferometer in order to realize large deflection angle measurement. A reflecting mirror is introduced for increasing the measurement resolution. In experiments, a deflection angle of a measured target was measured within ～3° with high accuracy. And as a phase modulating interferometer, it was used to measure a small angular displacement with a repeatability of 5.5 × 10^-8 rad.展开更多
The phase modulation characteristics of a reflective liquid crystal （LC） spatial light modulator （SLM） under oblique incidence are studied by using our proposed self-interference method. The experimental setup of ...The phase modulation characteristics of a reflective liquid crystal （LC） spatial light modulator （SLM） under oblique incidence are studied by using our proposed self-interference method. The experimental setup of the method is very simple and has good robustness to mechanical vibrations. By changing the gray value of the combined grayscale loaded on the LC-SLM, different sheared fringe patterns, generated by the interference between the constant phase-modulated beam and the ＋1-order diffracted beam of the blazed grating, can be obtained. The amount of phase modulation of the LC-SLM is obtained by subtracting the phase of the two side lobes in the frequency domain. By turning the turntable where the SLM is mounted, the phase modulation characteristics at different incident angles can be measured. The experimental results show that the phase modulation curves do not change significantly with the small angle. When the angle is large （i.e. larger than 10°）, the phase modulation curves become different, especially for the high gray levels. With the increase of the incident angle, the phase modulation depth is reduced. The results indicate that the incident angle plays an important role in the performance of the phase modulation of an LC-SLM.展开更多
Attitude pursuit guidance law is suitable for low cost missiles.A strap-down seeker is used to achieve this guidance law.The additional angles of attack or sideslip caused by wind and by control system are considered ...Attitude pursuit guidance law is suitable for low cost missiles.A strap-down seeker is used to achieve this guidance law.The additional angles of attack or sideslip caused by wind and by control system are considered as two disturbing factors which make attitude pursuit law impossible.Therefore,general attitude pursuit guidance law did not account for this two disturbing factors,because with those disturbing factors,it is difficult to apply.To solve the problem,the principle of strap-down seeker detecting target is investigated,the mathematical control model is established,then a modified attitude pursuit guidance law which employs the angular correction for those two disturbing factors is presented.It is proved that the modified attitude pursuit guidance law is appropriated to both in the presence of the additional angle of attack or sideslip via the simulations with the mathematical control model and Monte-Carlo method.展开更多
Based on robust control design method,a variable structure guidance method is proposed for autonomous underwater vehicle(AUV) during the guiding course with terminal impact angle constraint.Considering the intercept g...Based on robust control design method,a variable structure guidance method is proposed for autonomous underwater vehicle(AUV) during the guiding course with terminal impact angle constraint.Considering the intercept geometry,a sliding mode controller is proposed for controlling the hne of sight angle rate and the impact angle,based on the principle which controls the line of sight angle rate to approach zero and the terminal angle to approach the expected value more quickly as the distance decreases.Simulation results show that,with the application of the proposed method,small miss distance is achieved and the expected impact angle is reached.In addition,the system is robust to the target maneuvering.展开更多
In order to meet the rapid needs of processing square hole in mechanical equipment, the paper expounds the square hole processing method： planetary wheel method, and analyze the principle of tooling structure and pro...In order to meet the rapid needs of processing square hole in mechanical equipment, the paper expounds the square hole processing method： planetary wheel method, and analyze the principle of tooling structure and process with computer graphics parameters design. The results that, as long as the appropriate parameters, using the above method not only can punch the square hole, can also be processed triangle, the five angle and hexagonal regular polygon holes. The square hole processing method can provide theoretical basis and engineering reliable reference for related engineering and technical personnel.展开更多
A shear impact energy model （SIEM） of erosion suitable for both dilute and dense particle flows is pro- posed based on the shear impact energy of particles in discrete element method （DEM） simulations. A number of...A shear impact energy model （SIEM） of erosion suitable for both dilute and dense particle flows is pro- posed based on the shear impact energy of particles in discrete element method （DEM） simulations. A number of DEM simulations are performed to determine the relationship between the shear impact energy predicted by the DEM model and the theoretical erosion energy. Simulation results show that nearly one-quarter of the shear impact energy will be converted to erosion during an impingement. According to the ratio of the shear impact energy to the erosion energy, it is feasible to predict erosion from the shear impact energy, which can be accumulated at each time step for each impingement during the DEM simulation. The total erosion of the target surface can be obtained by summing the volume of material removed from each impingement. The proposed erosion model is validated against experiment and results show that the SIEM combined with DEM accurately predicts abrasive erosions.展开更多
In this paper, a novel engineering platform for throughflow analysis based on streamline curvature approach is developed for the research of a 5-stage compressor. The method includes several types of improved loss and...In this paper, a novel engineering platform for throughflow analysis based on streamline curvature approach is developed for the research of a 5-stage compressor. The method includes several types of improved loss and deviation angle models, which are combined with the authors' adjustments for the purpose of reflecting the influences of three-dimensional internal flow in high-loaded multistage compressors with higher accuracy. In order to validate the reliability and robustness of the method, a series of test cases, including a subsonic compressor P&W 3S1, a transonic rotor NASA Rotor 1B and especially an advanced high pressure core compressor GE E^3 HPC, are conducted. Then the computation procedure is applied to the research of a 5-stage compressor which is designed for developing an industrial gas turbine. The overall performance and aerodynamic configuration predicted by the procedure, both at design- and part-speed conditions, are analyzed and compared with experimental results, which show a good agreement. Further discussion regarding the universality of the method compared with CFD is made afterwards. The throughflow method is verified as a reliable and convenient tool for aerodynamic design and performance prediction of modern high-loaded compressors. This method is also qualified for use in the further optimization of the 5-stage compressor.展开更多
Liquid bridge force acting between wet particles is an important property in particle characterization. This paper deals with liquid bridge force between either two unequal-sized spherical particles or a sphere and a ...Liquid bridge force acting between wet particles is an important property in particle characterization. This paper deals with liquid bridge force between either two unequal-sized spherical particles or a sphere and a flat plate under conditions where gravitational effect arising from bridge distortion is negligible. In order to calculate the force of the liquid bridge efficiently and accurately, expressions of liquid configuration and liquid bridge force were derived by building a mechanical model, which assumes the liquid bridge to be circular in shape between either two unequal-sized spheres or a sphere and a plane. To assess the accuracy of the numerical results of the calculated liquid bridge forces, they were compared to the nuhlished experimental data.展开更多
基金Supported by the National Key R&D Program of China(Nos.2018 YFA 0605903,2019 YFC 1509101)the National Natural Science Foundation of China(No.41976218)the Fundamental Research Funds for the Central Universities(No.202165005)。
文摘To investigate the spatiotemporal variations in the mixed layer depth(MLD)in the Arctic basins,a new criterion to determine the MLD,called the improved maximum angle method(IMAM),was developed.A total of 45123 potential density profiles collected using Ice-Tethered Profilers(ITPs)in the Arctic basins during 2005-2021 were used to demonstrate the method’s effectiveness.By comparing the results obtained by the fixed threshold method(FTM),percentage threshold method(PTM),and maximum gradient method(MGM)for profiles in the Canada Basin,Makarov Basin,and Eurasian Basin,we determined that the quality index(1.0 for perfect identification of the MLD)of the IMAM regarding the assessment of the MLD determination method reached 0.94,which is much greater than those of other criteria.Moreover,two types of the density profiles were identified based on the mixed layer development stage.The MLDs of the typical profiles determined using the IMAM were found to have better consistency with the original definition.By utilizing the new mixed layer criterion,the seasonal variations and regional differences in the MLD in the Arctic basins were analyzed.Spatially,the summer and winter MLDs in the Canada Basin were the shallowest(13.55 m in summer,26.76 m in winter)than those in the Makarov(29.51 m in summer,49.08 m in winter)and Eurasian(20.36 m in summer,46.81 m in winter)basins due to the stable stratification in the upper ocean and the subsequent small effects of dynamic and thermodynamic processes(wind-driven stirring and brine rejection)in the Canada Basin.Seasonally,in the three Arctic basins,the average MLD was shallowest(22.77 m)in summer;it deepened through autumn and reached a winter maximum(41.12 m).
基金Supported by National Natural Science Foundation of China(No.51275147)
文摘In order to enhance the bearing capacity of non-circular gear pair, the non-circular gear pair with double generating angles is proposed based on the design idea of unsymmetrical gear with double pressure angles. The tooth profile is designed by generating cutting theory, the pure rolling mathematic model that the center line of unsymmetrical rack roll along non-circular pitch curve is built, the digital model of non-circular gear with double generating angles is created through the second development method of CAD software, and then the drive characteristic and tooth strength are analyzed. The results show that the design method for double generating angles non-circular gear proposed in this paper is feasible, which is significant to improve the bearing capacity of non-circular gear pair.
基金This project is supported by National 211 Project.
文摘A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has robustness to uncertainty of frequency, which makes it practical in engineering. Several time optimal and time-fuel optimal control strategies are designed for a kind of single flexible link. Simulation results validate the feasibility of our method.
文摘We introduce a new interpretation and quantitative method for computerized diplopia test. By comparing this new method to the Hess screen test, we validate its applicability among 304 patients with ocular motor nerve palsy. This new method shows great assistant value as the Hess screen test in making accurate diagnosis and quantitative evaluation the severity of diplopia. Furthermore, it is more convenient and suitable for daily clinical use.
基金Supported by the Real-time Monitoring of Electromagnetic Pulse Protection(Lightning)Effect and Grounding Resistance for Guangdong Yuedian Zhuhai Biqing Bay Sea Wind Farmthe Research on Key Technologies of Lightning Intelligent Protection System for Guangdong Energy Hehe Sea Wind Farm(SFC/QZW-ZX-XF-24-020).
文摘The lightning accidents still occurred frequently in facilities protected by the protective angle method.After years of research,the expert team of the China Lightning Science(Jindun)Industry-University-Research Institute Collaboration Base has redefined the working principle of lightning rods,developed a new type of lightning rod(lightning interceptor),proposed a new theory of regional lightning protection,and established an engineering technology method for regional lightning protection(semi-circular method).Significant results have been achieved in multiple professional fields.In this paper,the research and application effects of lightning rods and protection angle method,regional lightning protection theory,and semi-circular method are introduced,which can be used as a reference for relevant technical personnel.
基金Supported by Lightning Multi-pulse Intelligent Monitoring System Optimization Technology Project of Guangdong Yuedian Dianbai Hot Water Wind Farm(SFC/DBW-Z-FW-23-006).
文摘Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invented the lightning rod in 1752,lightning rods have been used worldwide to prevent direct lightning strikes in various fields such as high-voltage power transmission lines,outdoor chemical sites,highways,land and sea wind farms,and forest lightning fire protection.It has been proven that lightning accidents still occur frequently in places where lightning rods are installed and the protective angle method is used.In order to further study the protective effect of lightning rods and identify the shortcomings of lightning rod protection,negative lightning strikes are taken as the research object,to analyze the limitations of lightning rods in preventing direct lightning strikes from the working principle of lightning rods.
文摘For discrimination of the common W-junction and Y-junction in the labels of line drawing for a three-dimensional manifold plane surface with trihedral vertices, the existing algorithms are almost using angles between two adjacent lines and W-junction and Y- junction＇s definitions, and other complex methods. This passage gives four methods with their detailed mathematical inference processes in order to use these algorithms implemented by computer. The algorithms listed are Angle Summation method and Points to the Line method, Triangle methods which are the Triangle Area method and the Cross method. When the computer programs discriminate junctions, by comparison, the Angle Summation method and Points to the Line method are less efficacious than the Triangle method, and Cross method is more efficacious than the Triangle Area method in the Triangle method.
基金This work was supported by the National Natural Science Foundation of China under Grant No.60578051.
文摘An improved method of angle measurement is proposed based on a parallel plate interferometer. A position detection system is incorporated into a parallel plate interferometer in order to realize large deflection angle measurement. A reflecting mirror is introduced for increasing the measurement resolution. In experiments, a deflection angle of a measured target was measured within ～3° with high accuracy. And as a phase modulating interferometer, it was used to measure a small angular displacement with a repeatability of 5.5 × 10^-8 rad.
基金financially supported by the National Natural Science Foundation of China(No.51705404)the China Postdoctoral Science Foundation(No.2016M602806)the Fundamental Research Funds for the Central Universities(No.xjj2017093)
文摘The phase modulation characteristics of a reflective liquid crystal （LC） spatial light modulator （SLM） under oblique incidence are studied by using our proposed self-interference method. The experimental setup of the method is very simple and has good robustness to mechanical vibrations. By changing the gray value of the combined grayscale loaded on the LC-SLM, different sheared fringe patterns, generated by the interference between the constant phase-modulated beam and the ＋1-order diffracted beam of the blazed grating, can be obtained. The amount of phase modulation of the LC-SLM is obtained by subtracting the phase of the two side lobes in the frequency domain. By turning the turntable where the SLM is mounted, the phase modulation characteristics at different incident angles can be measured. The experimental results show that the phase modulation curves do not change significantly with the small angle. When the angle is large （i.e. larger than 10°）, the phase modulation curves become different, especially for the high gray levels. With the increase of the incident angle, the phase modulation depth is reduced. The results indicate that the incident angle plays an important role in the performance of the phase modulation of an LC-SLM.
文摘Attitude pursuit guidance law is suitable for low cost missiles.A strap-down seeker is used to achieve this guidance law.The additional angles of attack or sideslip caused by wind and by control system are considered as two disturbing factors which make attitude pursuit law impossible.Therefore,general attitude pursuit guidance law did not account for this two disturbing factors,because with those disturbing factors,it is difficult to apply.To solve the problem,the principle of strap-down seeker detecting target is investigated,the mathematical control model is established,then a modified attitude pursuit guidance law which employs the angular correction for those two disturbing factors is presented.It is proved that the modified attitude pursuit guidance law is appropriated to both in the presence of the additional angle of attack or sideslip via the simulations with the mathematical control model and Monte-Carlo method.
基金supported by the National Natural Science Foundation of China(61431020,61571434)
文摘Based on robust control design method,a variable structure guidance method is proposed for autonomous underwater vehicle(AUV) during the guiding course with terminal impact angle constraint.Considering the intercept geometry,a sliding mode controller is proposed for controlling the hne of sight angle rate and the impact angle,based on the principle which controls the line of sight angle rate to approach zero and the terminal angle to approach the expected value more quickly as the distance decreases.Simulation results show that,with the application of the proposed method,small miss distance is achieved and the expected impact angle is reached.In addition,the system is robust to the target maneuvering.
文摘In order to meet the rapid needs of processing square hole in mechanical equipment, the paper expounds the square hole processing method： planetary wheel method, and analyze the principle of tooling structure and process with computer graphics parameters design. The results that, as long as the appropriate parameters, using the above method not only can punch the square hole, can also be processed triangle, the five angle and hexagonal regular polygon holes. The square hole processing method can provide theoretical basis and engineering reliable reference for related engineering and technical personnel.
文摘A shear impact energy model （SIEM） of erosion suitable for both dilute and dense particle flows is pro- posed based on the shear impact energy of particles in discrete element method （DEM） simulations. A number of DEM simulations are performed to determine the relationship between the shear impact energy predicted by the DEM model and the theoretical erosion energy. Simulation results show that nearly one-quarter of the shear impact energy will be converted to erosion during an impingement. According to the ratio of the shear impact energy to the erosion energy, it is feasible to predict erosion from the shear impact energy, which can be accumulated at each time step for each impingement during the DEM simulation. The total erosion of the target surface can be obtained by summing the volume of material removed from each impingement. The proposed erosion model is validated against experiment and results show that the SIEM combined with DEM accurately predicts abrasive erosions.
基金supported by SEDRIand the National Natural Science Foundation of China(Grant No.51136003)
文摘In this paper, a novel engineering platform for throughflow analysis based on streamline curvature approach is developed for the research of a 5-stage compressor. The method includes several types of improved loss and deviation angle models, which are combined with the authors' adjustments for the purpose of reflecting the influences of three-dimensional internal flow in high-loaded multistage compressors with higher accuracy. In order to validate the reliability and robustness of the method, a series of test cases, including a subsonic compressor P&W 3S1, a transonic rotor NASA Rotor 1B and especially an advanced high pressure core compressor GE E^3 HPC, are conducted. Then the computation procedure is applied to the research of a 5-stage compressor which is designed for developing an industrial gas turbine. The overall performance and aerodynamic configuration predicted by the procedure, both at design- and part-speed conditions, are analyzed and compared with experimental results, which show a good agreement. Further discussion regarding the universality of the method compared with CFD is made afterwards. The throughflow method is verified as a reliable and convenient tool for aerodynamic design and performance prediction of modern high-loaded compressors. This method is also qualified for use in the further optimization of the 5-stage compressor.
基金supported by the Science Foundation of Chinese Universitythe Zhejiang Provincial Natural Science Foundation of China (Grant No. Y1100636)
文摘Liquid bridge force acting between wet particles is an important property in particle characterization. This paper deals with liquid bridge force between either two unequal-sized spherical particles or a sphere and a flat plate under conditions where gravitational effect arising from bridge distortion is negligible. In order to calculate the force of the liquid bridge efficiently and accurately, expressions of liquid configuration and liquid bridge force were derived by building a mechanical model, which assumes the liquid bridge to be circular in shape between either two unequal-sized spheres or a sphere and a plane. To assess the accuracy of the numerical results of the calculated liquid bridge forces, they were compared to the nuhlished experimental data.
