The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thick...The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thicknesses and positions in a combustion chamber casing simulator made of K439B superalloy was investigated.The intrinsic mechanisms of the SSE were explored from the dendrite structure,volume fraction and size of theγ'phase,and element segregation,etc.It is shown that this casting exhibits a strong SSE of creep rupture life,characterized by a significant difference in the CRL values up to 60%with the variation of wall thickness and position in the casing.In terms of casting technology,the influence of SSE on CRL is actually determined by the cooling rate.The SSE on the creep rupture life originates from the dendrite structure(such as the secondary dendrite arm spacing),volume fraction size of theγ'phase in the dendrite trunk,and elements segregation rate.This work may have implications for the design and application of engineering components with large sizes and complex structures.展开更多
This study proposed a force and shape collaborative control method that combined method of influence coefficients(MIC)and the elitist nondominated sorting genetic algorithm(NSGA-II)to reduce the shape deviation caused...This study proposed a force and shape collaborative control method that combined method of influence coefficients(MIC)and the elitist nondominated sorting genetic algorithm(NSGA-II)to reduce the shape deviation caused by manufacturing errors,gravity deformation,and fixturing errors and improve the shape accuracy of the assembled large composite fuselage panel.This study used a multi-point flexible assembly system driven by hexapod parallel robots.The proposed method simultaneously considers the shape deviation and assembly load of the panel.First,a multi-point flexible assembly system driven by hexapod parallel robots was introduced,with the relevant variables defined in the control process.In addition,the corresponding mathematical model was constructed.Subsequently,MIC was used to establish the prediction models between the displacements of actuators and displacements of panel shape control points,deformation loads applied by the actuators.Following the modeling,the shape deviation of the panel and the assembly load were used as the optimization objectives,and the displacements of actuators were optimized using NSGA-II.Finally,a typical composite fuselage panel case study was considered to demonstrate the effectiveness of the proposed method.展开更多
Natural diatomite （DT） is the ancient deposit of diatom skeleton with many regular pores of 50-200 nm and also an abundant source of biogenic silica. Although silica is considered biologically safe and there is an i...Natural diatomite （DT） is the ancient deposit of diatom skeleton with many regular pores of 50-200 nm and also an abundant source of biogenic silica. Although silica is considered biologically safe and there is an increasing interest of using natural diatomite for biomedical applications, the toxicity information about natural diatomite is still missing. Here, cytotoxicity of natural diatomite on osteoblasts and fibroblasts were compared to hydroxyapatite and the relationships between cytotoxicity and diatomite sizes, dose, geometry or impurity were systematically investigated. Cell adhesion and interaction with diatomite particles were also fluorescently observed, The results clearly suggested a size-, dose- and shape-dependent cytotoxicity of natural diatomite. Disk-shaped diatomite particles with average size of 30μm in diameter revealed the least toxicity, while the diatomite particles with irregular shapes and sizes less than 10 μm were remarkably toxic. Diatomite particles with proper sizes were then selected to investigate the reinforcing effect on injectable calcium phosphate bone cement. Results showed that diatomite significantly improved the compressive strength of bone cement but did not alter the injectability of the cement, This work provided important biocompatibility information of natural diatomite and demonstrated the feasibility of using selected diatomite as bone implant material.展开更多
The size and the shape of non-reversal random-walking polymerchains near an impenetrable, non- interacting flat surface areinvestigated by means of Monte Carlo simulation on the simple cubiclattice. It was found that ...The size and the shape of non-reversal random-walking polymerchains near an impenetrable, non- interacting flat surface areinvestigated by means of Monte Carlo simulation on the simple cubiclattice. It was found that both size and shape are dependent on thenormal-to-surface distance z_0 of the first segment of chain. We findthat the size and shape of chains, characterized by mean squareradius of gyration and mean asphericity parameter respectively, show similar dependence on distance z_0.展开更多
The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The tw...The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The two-way shape memory effect in quenched thin bar resulted from the preferential formation/extinction of martensite variant due to the internal quench stress, and the variant was formed at an angle of about 45 deg. with the tension direction ([001] of the βphase). Initial thermomechanical cycling under relatively low stress single variant stress-induced martensite was formed at an angle of 45 deg. with the tension and its morphology was a lath of parallel twins. More than one group of variants were formed after several training cycles and such variants also caused tilting of some thermally formed accommodated martensite. By overheating the trained sample containing stabilized multi-variants of stress-induced martensite, very coarse martensite structure with a strong asymmetry was produced, which caused the reverse two-way shape memory effect.展开更多
One of the crucial issues in the chemical looping technology lies in its bed material:the oxygen carrier.Particle size analysis of an oxygen carrier is important since in a fluidized bed the material can only work wel...One of the crucial issues in the chemical looping technology lies in its bed material:the oxygen carrier.Particle size analysis of an oxygen carrier is important since in a fluidized bed the material can only work well within a specific size range.While the favorable size ranges for oxygen carrier materials have already been reported,none of the published studies has analyzed the particle size and shape of oxygen carriers in detail.Furthermore,the effect of oxygen carriers'oxidation degree on such properties has not been considered either.This study aimed to report the particle size and shape analysis of five iron-based oxygen carriers,one natural ore,one synthetic material,and three residue products,at different oxidation degrees using dynamic image analysis(DIA).The oxygen carriers were prepared at different mass conversion degrees in a fluidized bed batch reactor.The size distribution,sphericity,and aspect ratio of the oxygen carrier particles were examined experimentally using a Camsizer instrument.Our results show that the DIA method was successfully able to analyze the particle size and shape of our oxygen carriers with satisfying accuracy for comparison.The oxidation state of the investigated materials seems to only affect the particle size and shape of oxygen carriers to a minor extent.However,exposures to redox cycles in a fluidized bed reactor may alter the particle size and shape of most oxygen carriers.展开更多
RNA-binding proteins(RBPs)are components of the post-transcriptional regulatory system,but their regulatory effects on complex traits remain unknown.Using an integrated strategy involving map-based cloning,functional ...RNA-binding proteins(RBPs)are components of the post-transcriptional regulatory system,but their regulatory effects on complex traits remain unknown.Using an integrated strategy involving map-based cloning,functional characterizations,and transcriptomic and population genomic analyses,we revealed that RBP-K(LOC_Os08g23120),RBP-A(LOC_Os11g41890),and RBP-J(LOC_Os10g33230)encode proteins that form an RBP-A-J-K complex that negatively regulates rice yield-related traits.Examinations of the RBP-A-J-K complex indicated RBP-K functions as a relatively non-specific RBP chaperone that enables RBP-A and RBP-J to function normally.Additionally,RBP-J most likely affects GA pathways,resulting in considerable increases in grain and panicle lengths,but decreases in grain width and thickness.In contrast,RBP-A negatively regulates the expression of genes most likely involved in auxin-regulated pathways controlling cell wall elongation and carbohydrate transport,with substantial effects on the rice grain filling process as well as grain length and weight.Evolutionarily,RBP-K is relatively ancient and highly conserved,whereas RBP-J and RBP-A are more diverse.Thus,the RBP-A-J-K complex may represent a typical functional model for many RBPs and protein complexes that function at transcriptional and post-transcriptional levels in plants and animals for increased functional consistency,efficiency,and versatility,as well as increased evolutionary potential.Our results clearly demonstrate the importance of RBP-mediated post-transcriptional regulation for the diversity of complex traits.Furthermore,rice grain yield and quality may be enhanced by introducing various complete or partial loss-of-function mutations to specific RBP genes using clustered regularly interspaced palindromic repeats(CRISPR)/CRISPR-associated protein 9 technology and by exploiting desirable natural tri-genic allelic combinations at the loci encoding the components of the RBP-A-J-K complex through marker-assisted selection.展开更多
Recent years have witnessed increasingly frequent extreme precipitation events,especially in desert steppes in the semi-arid and arid transition zone.Focusing on a desert steppe in western-central Inner Mongolia Auton...Recent years have witnessed increasingly frequent extreme precipitation events,especially in desert steppes in the semi-arid and arid transition zone.Focusing on a desert steppe in western-central Inner Mongolia Autonomous Region,China,this study aimed to determine the principle time-varying pattern of extreme precipitation and its dominant climate forcings during the period 1988-2017.Based on the generalized additive models for location,scale,and shape(GAMLSS)modeling framework,we developed the best time-dependent models for the extreme precipitation series at nine stations,as well as the optimized non-stationary models with large-scale climate indices(including the North Atlantic Oscillation(NAO),Atlantic Multidecadal Oscillation(AMO),Southern Oscillation(SO),Pacific Decadal Oscillation(PDO),Arctic Oscillation(AO),and North Pacific Oscillation(NPO))as covariates.The results indicated that extreme precipitation remained stationary at more than half of the stations(Hailisu,Wuyuan,Dengkou,Hanggin Rear Banner,Urad Front Banner,and Yikewusu),while linear and non-linear time-varying patterns were quantitatively identified at the other stations(Urad Middle Banner,Linhe,and Wuhai).These non-stationary behaviors of extreme precipitation were mainly reflected in the mean value of extreme precipitation.The optimized non-stationary models performed best,indicating the significant influences of large-scale climate indices on extreme precipitation.In particular,the NAO,NPO,SO,and AMO remained as covariates and significantly influenced the variations in the extreme precipitation regime.Our findings have important reference significance for gaining an in-depth understanding of the driving mechanism of the non-stationary behavior of extreme precipitation and enable advanced predictions of rainstorm risks.展开更多
Lithium iron phosphate （LiFePO4） is a potential high efficiency cathode material for lithium ion batteries, but the low electronic conductivity and single diffusion channel for lithium ions require good particle siz...Lithium iron phosphate （LiFePO4） is a potential high efficiency cathode material for lithium ion batteries, but the low electronic conductivity and single diffusion channel for lithium ions require good particle size and shape control during the synthesis of this material. In this paper, six LiFePO4 nanocrystals with different size and shape have been successfully synthesized in ethylene glycol. The addition sequence Fe-PO4-Li helps to form LiFePO4 nanocrystals with mostly {010} faces exposed, and increasing the amount of LiOH leads to a decrease in particle size. The electrochemical performance of the six distinct LiFePO4 particles show that the most promising LiFePO4 nanocrystals either have predominant {010} face exposure or high specific area, with little iron（II） oxidation.展开更多
Flap side-edge noise is a significant noise source for airplane at takeoff and landing stages. The generation mechanism of flap side-edge noise is analyzed by numerical simulation on unsteady flow field using Very Lar...Flap side-edge noise is a significant noise source for airplane at takeoff and landing stages. The generation mechanism of flap side-edge noise is analyzed by numerical simulation on unsteady flow field using Very Large Eddy Simulation （VLES）. Two kinds of flap side-edge shape modifications are proposed, and their frequency spectrum and directivity of far-field noise are compared with the baseline configuration using permeable integral surface Ffowcs Williams and Hawkings （FW-H） acoustic analogy method to investigate their effects on noise reduction. Via the numerical simulation of flow field and acoustic field, it proves that the flap side-edge noise is broadband noise in nature. The different shapes of flap side-edge change the pattern of flow field, vortex structures and the development of vortex, thus having influences on noise source distributions and characteristics of far-field noise. The result shows that at the given 5° angle of attack, the proposed flap side-edge shape modifications can reduce the overall sound pressure level （OASPL） by 1 to 2 dB without decreasing the lift and drag aerodynamic performances.展开更多
Nanomaterials possess intriguing optical properties that depend sensitively on size, shape, and material content of the structures. Controlling such structural characteristics of the nanostructures allows the tailorin...Nanomaterials possess intriguing optical properties that depend sensitively on size, shape, and material content of the structures. Controlling such structural characteristics of the nanostructures allows the tailoring of their physical and chemical properties, e.g. optical, electronic, and catalytic, to achieve what is desired lot specific applications of interest. This review will cover the development of various shapes for silver and gold nanomaterials with emphasis on their relation to optical properties. Examples of various modern synthetic methods and characterization techniques are highlighted. The influence of the metal nanomaterial＇s shape and optical absorption on surface enhanced Raman scattering （SERS） and a final note on new emerging applications of metal nanostructures are also discussed.展开更多
Genital size is a crucial index for the assessment of male sexual development, as abnormal penile or testicular size may be the earliest visible clinical manifestation of some diseases. However, there is a lack of dat...Genital size is a crucial index for the assessment of male sexual development, as abnormal penile or testicular size may be the earliest visible clinical manifestation of some diseases. However, there is a lack of data regarding penile and testicular size measurements for Chinese boys at all stages of childhood and puberty. This cross-sectional study aimed to develop appropriate growth curves and charts for male external genitalia among children and adolescents aged 0-17 years in Chongqing, China. A total of 2974 boys were enrolled in the present study. Penile length was measured using a rigid ruler, penile diameter was measured using a pachymeter, and testicular volume was determined using a Prader orchidometer. Age-specific percentile curves for penile length, penile diameter, and testicular volume were drawn using the generalized additive models for location, scale, and shape. Very similar growth curves were found for both penile length and penile diameter. Both of them gradually rose to 10 years of age and then sharply increased from 11 to 15 years of age. However, testicular volume changed little before the age of 10 years. This study contributes to the literature covering age-specific growth curve and charts about male external genitalia in Chinese children and adolescents. These age-related values are valuable in evaluating the growth and development status of male external genitalia and could be helpful in diagnosing genital disorders.展开更多
The grain size of prior austenite has a distinct influence on the microstructure and final mechanical properties of steels. Thus, it is significant to clearly reveal the grain boundaries and therefore to precisely cha...The grain size of prior austenite has a distinct influence on the microstructure and final mechanical properties of steels. Thus, it is significant to clearly reveal the grain boundaries and therefore to precisely characterize the grain size of prior austenite. For NiCrMoV rotor steels quenched and tempered at high temperature, it is really difficult to display the grain boundaries of prior austenite clearly, which limits a further study on the correlation between the properties and the corresponding microstructure. In this paper, an effective etchant was put forward and further optimized. Experimental results indicated that this agent was effective to show the details of grain boundaries, which help analyze fatigue crack details along the propagation path. The optimized corrosion agent is successful to observe the microstructure characteristics and expected to help analyze the effect of microstructure for a further study on the mechanical properties of NiCrMoV rotor steels used in the field of nuclear power.展开更多
Computational models are developed to create grain structures using mathematical algorithms based on the chaos theory such as cellular automaton, geometrical models, fractals, and stochastic methods. Because of the ch...Computational models are developed to create grain structures using mathematical algorithms based on the chaos theory such as cellular automaton, geometrical models, fractals, and stochastic methods. Because of the chaotic nature of grain structures, some of the most popular routines are based on the Monte Carlo method, statistical distributions, and random walk methods, which can be easily programmed and included in nested loops. Nevertheless, grain structures are not well defined as the results of computational errors and numerical incon- sistencies on mathematical methods. Due to the finite definition of numbers or the numerical restrictions during the simulation of solidifica- tion, damaged images appear on the screen. These images must be repaired to obtain a good measurement of grain geometrical properties. Some mathematical algorithms were developed to repair, measure, and characterize grain structures obtained from cellular automata in the present work. An appropriate measurement of grain size and the corrected identification of interfaces and length are very important topics in materials science because they are the representation and validation of mathematical models with real samples. As a result, the developed al- gorithms are tested and proved to be appropriate and efficient to eliminate the errors and characterize the grain structures.展开更多
The molten metal is drawn to the alternating magnetic field composed of a 10~30KHz power supply and a non-magnetizer coil,where the molten metal will float(for the sheet/strip billet) or float and be restrained(for th...The molten metal is drawn to the alternating magnetic field composed of a 10~30KHz power supply and a non-magnetizer coil,where the molten metal will float(for the sheet/strip billet) or float and be restrained(for the section bar billet) because of electromagnetic induction.During continuous movement the molten metal is appropriately cooled to keep the afterheat with the upper limited temperature of the hot working and then enters the processing machine,where it is rolled and continuously pressed into materials like the electronic component(for example,the radiator),or enters the program-controlled casting line(at which the metal semisolid slurry is replaced) for the purpose of the casting of mechanical part billets(such as billets for gears and internal and external rings of bearings).The effect of energy saving and income increase is remarkable.展开更多
A description of a mathematical algorithm for simulating grain structures with straight and hyperbolic interfaces is shown. The presence of straight and hyperbolic interfaces in many grain structures of metallic mater...A description of a mathematical algorithm for simulating grain structures with straight and hyperbolic interfaces is shown. The presence of straight and hyperbolic interfaces in many grain structures of metallic materials is due to different solidification conditions, in- eluding different solidification speeds, growth directions, and delaying on the nucleation times of each nucleated node. Grain growth is a complex problem to be simulated; therefore, computational methods based on the chaos theory have been developed for this purpose. Straight and hyperbolic interfaces are between columnar and equiaxed grain structures or in transition zones. The algorithm developed in this work involves random distributions of temperature to assign preferential probabilities to each node of the simulated sample for nucleation according to previously defined boundary conditions. Moreover, more than one single nucleation process can be established in order to gen- erate hyperbolic interfaces between the grains. The appearance of new nucleated nodes is declared in sequences with a particular number of nucleated nodes and a number of steps for execution. This input information influences directly on the final grain structure （grain size and dislribution）. Preferential growth directions are also established to obtain equiaxed and columnar grains. The simulation is done using rou- tines for nucleation and growth nested inside the main function. Here, random numbers are generated to place the coordinates of each new nucleated node at each nucleation sequence according to a solidification probability. Nucleation and growth routines are executed as a func- tion of nodal availability in order to know if a node will be part of a grain. Finally, this information is saved in a two-dimensional computa- tional array and displayed on the computer screen placing color pixels on the corresponding position forming an image as is done in cellular automaton.展开更多
Grain size control of tungsten powder is essential for high quality tungsten products. Based on studies on the hydrogen reduction process of tungsten oxide, a microcomputer system is described for reduction process co...Grain size control of tungsten powder is essential for high quality tungsten products. Based on studies on the hydrogen reduction process of tungsten oxide, a microcomputer system is described for reduction process control. The system, now running in Zhuzhou Tungsten and Molybdenum Materials Plant, controls the temperature of the reduction furnace and hydrogen pressure. It also controls a mechanical pusher which pushs the boats charged with blue tungsten oxide into the furnace tubes. Some of the technical problems in the process are analysed.展开更多
Poschl-Teller double-ring-shaped Coulomb （PTDRSC） potential, the Coulomb potential surrounded by PSschl- Teller and double-ring-shaped inversed square potential, is put forward. In spherical polar coordinates, PTDRS...Poschl-Teller double-ring-shaped Coulomb （PTDRSC） potential, the Coulomb potential surrounded by PSschl- Teller and double-ring-shaped inversed square potential, is put forward. In spherical polar coordinates, PTDRSC potential has supersymmetry and shape invariance in φ,θ and τ coordinates. By using the method of supersymmetry and shape invariance, exact bound state solutions of Schr6dinger equation with PTDRSC potential are presented. The normalized φ,θ angular wave function expressed in terms of Jacobi polynomials and the normalized radial wave function expressed in terms of Laguerre polynomials are presented. Energy spectrum equations are obtained. Wave function and energy spectrum equations of the system are related to three quantum numbers and parameters of PTDRSC potential. The solutions of wave functions and corresponding eigenvalues are only suitable for the PTDRSC potential.展开更多
By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain siz...By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain size,phase composition,microstructure and crystallization process.The results show that the nanophase M-type Sr-ferrite prepared by this method is single,and its grain size is smaller than 100 nm.Moreover,most of the grains present hexagonal sheet shape.Tests are carried out for its attenuation to 1.06 mm laser.It is found that the extinction capability of the nanophase M-type Sr-ferrite smoke is good,and its mass extinction coefficient is 1.628 m2/g.展开更多
基金financially supported by the National Science and Technology Major Project of China (No.J2019-VI-0004-0117)a Laboratory Fund Project (6142903220101)。
文摘The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thicknesses and positions in a combustion chamber casing simulator made of K439B superalloy was investigated.The intrinsic mechanisms of the SSE were explored from the dendrite structure,volume fraction and size of theγ'phase,and element segregation,etc.It is shown that this casting exhibits a strong SSE of creep rupture life,characterized by a significant difference in the CRL values up to 60%with the variation of wall thickness and position in the casing.In terms of casting technology,the influence of SSE on CRL is actually determined by the cooling rate.The SSE on the creep rupture life originates from the dendrite structure(such as the secondary dendrite arm spacing),volume fraction size of theγ'phase in the dendrite trunk,and elements segregation rate.This work may have implications for the design and application of engineering components with large sizes and complex structures.
基金supported by National Natural Science Foundation of China(No.52105502)Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing(Nos.COMAC-SFGS-2019-263 and COMAC-SFGS-2019-3731)the Fundamental Research Funds for the Central Universities(No.3042021601).
文摘This study proposed a force and shape collaborative control method that combined method of influence coefficients(MIC)and the elitist nondominated sorting genetic algorithm(NSGA-II)to reduce the shape deviation caused by manufacturing errors,gravity deformation,and fixturing errors and improve the shape accuracy of the assembled large composite fuselage panel.This study used a multi-point flexible assembly system driven by hexapod parallel robots.The proposed method simultaneously considers the shape deviation and assembly load of the panel.First,a multi-point flexible assembly system driven by hexapod parallel robots was introduced,with the relevant variables defined in the control process.In addition,the corresponding mathematical model was constructed.Subsequently,MIC was used to establish the prediction models between the displacements of actuators and displacements of panel shape control points,deformation loads applied by the actuators.Following the modeling,the shape deviation of the panel and the assembly load were used as the optimization objectives,and the displacements of actuators were optimized using NSGA-II.Finally,a typical composite fuselage panel case study was considered to demonstrate the effectiveness of the proposed method.
基金financially supported by the National Natural Science Foundation of China(Nos.81622032,51672184,51525101and 51472279)the Priority Academic Program Development of Jiangsu High Education Institutions(PAPD)+2 种基金the Jiangsu Innovation and Entrepreneurship Program,the National Basic Research Program of China(973 Program,No.2014CB748600)the Jiangsu Provincial Special Program of Medical Science(No.BL2012004)the Jiangsu Six Peak of Talents Program(No.2013-WSW-056)
文摘Natural diatomite （DT） is the ancient deposit of diatom skeleton with many regular pores of 50-200 nm and also an abundant source of biogenic silica. Although silica is considered biologically safe and there is an increasing interest of using natural diatomite for biomedical applications, the toxicity information about natural diatomite is still missing. Here, cytotoxicity of natural diatomite on osteoblasts and fibroblasts were compared to hydroxyapatite and the relationships between cytotoxicity and diatomite sizes, dose, geometry or impurity were systematically investigated. Cell adhesion and interaction with diatomite particles were also fluorescently observed, The results clearly suggested a size-, dose- and shape-dependent cytotoxicity of natural diatomite. Disk-shaped diatomite particles with average size of 30μm in diameter revealed the least toxicity, while the diatomite particles with irregular shapes and sizes less than 10 μm were remarkably toxic. Diatomite particles with proper sizes were then selected to investigate the reinforcing effect on injectable calcium phosphate bone cement. Results showed that diatomite significantly improved the compressive strength of bone cement but did not alter the injectability of the cement, This work provided important biocompatibility information of natural diatomite and demonstrated the feasibility of using selected diatomite as bone implant material.
基金Supported by the National Natural Science Foundation of China (No. 20076038).
文摘The size and the shape of non-reversal random-walking polymerchains near an impenetrable, non- interacting flat surface areinvestigated by means of Monte Carlo simulation on the simple cubiclattice. It was found that both size and shape are dependent on thenormal-to-surface distance z_0 of the first segment of chain. We findthat the size and shape of chains, characterized by mean squareradius of gyration and mean asphericity parameter respectively, show similar dependence on distance z_0.
文摘The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The two-way shape memory effect in quenched thin bar resulted from the preferential formation/extinction of martensite variant due to the internal quench stress, and the variant was formed at an angle of about 45 deg. with the tension direction ([001] of the βphase). Initial thermomechanical cycling under relatively low stress single variant stress-induced martensite was formed at an angle of 45 deg. with the tension and its morphology was a lath of parallel twins. More than one group of variants were formed after several training cycles and such variants also caused tilting of some thermally formed accommodated martensite. By overheating the trained sample containing stabilized multi-variants of stress-induced martensite, very coarse martensite structure with a strong asymmetry was produced, which caused the reverse two-way shape memory effect.
基金the project EU CLARA(Chemical Looping Gasification for Sustainable Production of Biofuels),which has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 817841the Swedish Energy Agency(Project 51430-1)and Stiftelsen AForsk(Project 20-269).Boliden AB is acknowledged for iron sand sourcing.The authors would like to thank Bio4Energy,a Strategic Research Environment appointed by the Swedish government.
文摘One of the crucial issues in the chemical looping technology lies in its bed material:the oxygen carrier.Particle size analysis of an oxygen carrier is important since in a fluidized bed the material can only work well within a specific size range.While the favorable size ranges for oxygen carrier materials have already been reported,none of the published studies has analyzed the particle size and shape of oxygen carriers in detail.Furthermore,the effect of oxygen carriers'oxidation degree on such properties has not been considered either.This study aimed to report the particle size and shape analysis of five iron-based oxygen carriers,one natural ore,one synthetic material,and three residue products,at different oxidation degrees using dynamic image analysis(DIA).The oxygen carriers were prepared at different mass conversion degrees in a fluidized bed batch reactor.The size distribution,sphericity,and aspect ratio of the oxygen carrier particles were examined experimentally using a Camsizer instrument.Our results show that the DIA method was successfully able to analyze the particle size and shape of our oxygen carriers with satisfying accuracy for comparison.The oxidation state of the investigated materials seems to only affect the particle size and shape of oxygen carriers to a minor extent.However,exposures to redox cycles in a fluidized bed reactor may alter the particle size and shape of most oxygen carriers.
基金supported by the Innovation Program of Shanghai Municipal Education Commission(2023ZKZD05)the National Natural Science Foundation of China(32172043,31971918 and 32170356)+2 种基金the Shanghai Science and Technology Innovation Action Plan Project(22N11900200)the Innovation Program of Chinese Academy of Agricultural Sciencesthe grant from the National Key Research and Development Program of China(2021YFA1300401).
文摘RNA-binding proteins(RBPs)are components of the post-transcriptional regulatory system,but their regulatory effects on complex traits remain unknown.Using an integrated strategy involving map-based cloning,functional characterizations,and transcriptomic and population genomic analyses,we revealed that RBP-K(LOC_Os08g23120),RBP-A(LOC_Os11g41890),and RBP-J(LOC_Os10g33230)encode proteins that form an RBP-A-J-K complex that negatively regulates rice yield-related traits.Examinations of the RBP-A-J-K complex indicated RBP-K functions as a relatively non-specific RBP chaperone that enables RBP-A and RBP-J to function normally.Additionally,RBP-J most likely affects GA pathways,resulting in considerable increases in grain and panicle lengths,but decreases in grain width and thickness.In contrast,RBP-A negatively regulates the expression of genes most likely involved in auxin-regulated pathways controlling cell wall elongation and carbohydrate transport,with substantial effects on the rice grain filling process as well as grain length and weight.Evolutionarily,RBP-K is relatively ancient and highly conserved,whereas RBP-J and RBP-A are more diverse.Thus,the RBP-A-J-K complex may represent a typical functional model for many RBPs and protein complexes that function at transcriptional and post-transcriptional levels in plants and animals for increased functional consistency,efficiency,and versatility,as well as increased evolutionary potential.Our results clearly demonstrate the importance of RBP-mediated post-transcriptional regulation for the diversity of complex traits.Furthermore,rice grain yield and quality may be enhanced by introducing various complete or partial loss-of-function mutations to specific RBP genes using clustered regularly interspaced palindromic repeats(CRISPR)/CRISPR-associated protein 9 technology and by exploiting desirable natural tri-genic allelic combinations at the loci encoding the components of the RBP-A-J-K complex through marker-assisted selection.
基金funded by the Yinshanbeilu Grassland Eco-hydrology National Observation and Research Station,China Institute of Water Resources and Hydropower Research(YSS202105)the National Natural Science Foundation of China(52269005)+3 种基金the Inner Mongolia Science and Technology Plan Project(2022YFSH0105)the Central Guidance for Local Science and Technology Development Fund Projects(2024ZY0002)the Inner Mongolia Autonomous Region University Youth Science and Technology Talent Project(NJYT 22037)the Inner Mongolia Agricultural University Young Teachers'Scientific Research Ability Improvement Project(BR220104).
文摘Recent years have witnessed increasingly frequent extreme precipitation events,especially in desert steppes in the semi-arid and arid transition zone.Focusing on a desert steppe in western-central Inner Mongolia Autonomous Region,China,this study aimed to determine the principle time-varying pattern of extreme precipitation and its dominant climate forcings during the period 1988-2017.Based on the generalized additive models for location,scale,and shape(GAMLSS)modeling framework,we developed the best time-dependent models for the extreme precipitation series at nine stations,as well as the optimized non-stationary models with large-scale climate indices(including the North Atlantic Oscillation(NAO),Atlantic Multidecadal Oscillation(AMO),Southern Oscillation(SO),Pacific Decadal Oscillation(PDO),Arctic Oscillation(AO),and North Pacific Oscillation(NPO))as covariates.The results indicated that extreme precipitation remained stationary at more than half of the stations(Hailisu,Wuyuan,Dengkou,Hanggin Rear Banner,Urad Front Banner,and Yikewusu),while linear and non-linear time-varying patterns were quantitatively identified at the other stations(Urad Middle Banner,Linhe,and Wuhai).These non-stationary behaviors of extreme precipitation were mainly reflected in the mean value of extreme precipitation.The optimized non-stationary models performed best,indicating the significant influences of large-scale climate indices on extreme precipitation.In particular,the NAO,NPO,SO,and AMO remained as covariates and significantly influenced the variations in the extreme precipitation regime.Our findings have important reference significance for gaining an in-depth understanding of the driving mechanism of the non-stationary behavior of extreme precipitation and enable advanced predictions of rainstorm risks.
文摘Lithium iron phosphate （LiFePO4） is a potential high efficiency cathode material for lithium ion batteries, but the low electronic conductivity and single diffusion channel for lithium ions require good particle size and shape control during the synthesis of this material. In this paper, six LiFePO4 nanocrystals with different size and shape have been successfully synthesized in ethylene glycol. The addition sequence Fe-PO4-Li helps to form LiFePO4 nanocrystals with mostly {010} faces exposed, and increasing the amount of LiOH leads to a decrease in particle size. The electrochemical performance of the six distinct LiFePO4 particles show that the most promising LiFePO4 nanocrystals either have predominant {010} face exposure or high specific area, with little iron（II） oxidation.
文摘Flap side-edge noise is a significant noise source for airplane at takeoff and landing stages. The generation mechanism of flap side-edge noise is analyzed by numerical simulation on unsteady flow field using Very Large Eddy Simulation （VLES）. Two kinds of flap side-edge shape modifications are proposed, and their frequency spectrum and directivity of far-field noise are compared with the baseline configuration using permeable integral surface Ffowcs Williams and Hawkings （FW-H） acoustic analogy method to investigate their effects on noise reduction. Via the numerical simulation of flow field and acoustic field, it proves that the flap side-edge noise is broadband noise in nature. The different shapes of flap side-edge change the pattern of flow field, vortex structures and the development of vortex, thus having influences on noise source distributions and characteristics of far-field noise. The result shows that at the given 5° angle of attack, the proposed flap side-edge shape modifications can reduce the overall sound pressure level （OASPL） by 1 to 2 dB without decreasing the lift and drag aerodynamic performances.
基金the National Science Foundation,NASA-UARC,US Armythe Lawrence Scholar Program(formerly known as Student Employee Graduate Research Fellowship).
文摘Nanomaterials possess intriguing optical properties that depend sensitively on size, shape, and material content of the structures. Controlling such structural characteristics of the nanostructures allows the tailoring of their physical and chemical properties, e.g. optical, electronic, and catalytic, to achieve what is desired lot specific applications of interest. This review will cover the development of various shapes for silver and gold nanomaterials with emphasis on their relation to optical properties. Examples of various modern synthetic methods and characterization techniques are highlighted. The influence of the metal nanomaterial＇s shape and optical absorption on surface enhanced Raman scattering （SERS） and a final note on new emerging applications of metal nanostructures are also discussed.
文摘Genital size is a crucial index for the assessment of male sexual development, as abnormal penile or testicular size may be the earliest visible clinical manifestation of some diseases. However, there is a lack of data regarding penile and testicular size measurements for Chinese boys at all stages of childhood and puberty. This cross-sectional study aimed to develop appropriate growth curves and charts for male external genitalia among children and adolescents aged 0-17 years in Chongqing, China. A total of 2974 boys were enrolled in the present study. Penile length was measured using a rigid ruler, penile diameter was measured using a pachymeter, and testicular volume was determined using a Prader orchidometer. Age-specific percentile curves for penile length, penile diameter, and testicular volume were drawn using the generalized additive models for location, scale, and shape. Very similar growth curves were found for both penile length and penile diameter. Both of them gradually rose to 10 years of age and then sharply increased from 11 to 15 years of age. However, testicular volume changed little before the age of 10 years. This study contributes to the literature covering age-specific growth curve and charts about male external genitalia in Chinese children and adolescents. These age-related values are valuable in evaluating the growth and development status of male external genitalia and could be helpful in diagnosing genital disorders.
文摘The grain size of prior austenite has a distinct influence on the microstructure and final mechanical properties of steels. Thus, it is significant to clearly reveal the grain boundaries and therefore to precisely characterize the grain size of prior austenite. For NiCrMoV rotor steels quenched and tempered at high temperature, it is really difficult to display the grain boundaries of prior austenite clearly, which limits a further study on the correlation between the properties and the corresponding microstructure. In this paper, an effective etchant was put forward and further optimized. Experimental results indicated that this agent was effective to show the details of grain boundaries, which help analyze fatigue crack details along the propagation path. The optimized corrosion agent is successful to observe the microstructure characteristics and expected to help analyze the effect of microstructure for a further study on the mechanical properties of NiCrMoV rotor steels used in the field of nuclear power.
文摘Computational models are developed to create grain structures using mathematical algorithms based on the chaos theory such as cellular automaton, geometrical models, fractals, and stochastic methods. Because of the chaotic nature of grain structures, some of the most popular routines are based on the Monte Carlo method, statistical distributions, and random walk methods, which can be easily programmed and included in nested loops. Nevertheless, grain structures are not well defined as the results of computational errors and numerical incon- sistencies on mathematical methods. Due to the finite definition of numbers or the numerical restrictions during the simulation of solidifica- tion, damaged images appear on the screen. These images must be repaired to obtain a good measurement of grain geometrical properties. Some mathematical algorithms were developed to repair, measure, and characterize grain structures obtained from cellular automata in the present work. An appropriate measurement of grain size and the corrected identification of interfaces and length are very important topics in materials science because they are the representation and validation of mathematical models with real samples. As a result, the developed al- gorithms are tested and proved to be appropriate and efficient to eliminate the errors and characterize the grain structures.
文摘The molten metal is drawn to the alternating magnetic field composed of a 10~30KHz power supply and a non-magnetizer coil,where the molten metal will float(for the sheet/strip billet) or float and be restrained(for the section bar billet) because of electromagnetic induction.During continuous movement the molten metal is appropriately cooled to keep the afterheat with the upper limited temperature of the hot working and then enters the processing machine,where it is rolled and continuously pressed into materials like the electronic component(for example,the radiator),or enters the program-controlled casting line(at which the metal semisolid slurry is replaced) for the purpose of the casting of mechanical part billets(such as billets for gears and internal and external rings of bearings).The effect of energy saving and income increase is remarkable.
文摘A description of a mathematical algorithm for simulating grain structures with straight and hyperbolic interfaces is shown. The presence of straight and hyperbolic interfaces in many grain structures of metallic materials is due to different solidification conditions, in- eluding different solidification speeds, growth directions, and delaying on the nucleation times of each nucleated node. Grain growth is a complex problem to be simulated; therefore, computational methods based on the chaos theory have been developed for this purpose. Straight and hyperbolic interfaces are between columnar and equiaxed grain structures or in transition zones. The algorithm developed in this work involves random distributions of temperature to assign preferential probabilities to each node of the simulated sample for nucleation according to previously defined boundary conditions. Moreover, more than one single nucleation process can be established in order to gen- erate hyperbolic interfaces between the grains. The appearance of new nucleated nodes is declared in sequences with a particular number of nucleated nodes and a number of steps for execution. This input information influences directly on the final grain structure （grain size and dislribution）. Preferential growth directions are also established to obtain equiaxed and columnar grains. The simulation is done using rou- tines for nucleation and growth nested inside the main function. Here, random numbers are generated to place the coordinates of each new nucleated node at each nucleation sequence according to a solidification probability. Nucleation and growth routines are executed as a func- tion of nodal availability in order to know if a node will be part of a grain. Finally, this information is saved in a two-dimensional computa- tional array and displayed on the computer screen placing color pixels on the corresponding position forming an image as is done in cellular automaton.
文摘Grain size control of tungsten powder is essential for high quality tungsten products. Based on studies on the hydrogen reduction process of tungsten oxide, a microcomputer system is described for reduction process control. The system, now running in Zhuzhou Tungsten and Molybdenum Materials Plant, controls the temperature of the reduction furnace and hydrogen pressure. It also controls a mechanical pusher which pushs the boats charged with blue tungsten oxide into the furnace tubes. Some of the technical problems in the process are analysed.
基金Project supported by the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province of China (Grant No. 05KJD140252)the Natural Science Foundation of Jiangsu Province of China (Grant No. KB2008199)
文摘Poschl-Teller double-ring-shaped Coulomb （PTDRSC） potential, the Coulomb potential surrounded by PSschl- Teller and double-ring-shaped inversed square potential, is put forward. In spherical polar coordinates, PTDRSC potential has supersymmetry and shape invariance in φ,θ and τ coordinates. By using the method of supersymmetry and shape invariance, exact bound state solutions of Schr6dinger equation with PTDRSC potential are presented. The normalized φ,θ angular wave function expressed in terms of Jacobi polynomials and the normalized radial wave function expressed in terms of Laguerre polynomials are presented. Energy spectrum equations are obtained. Wave function and energy spectrum equations of the system are related to three quantum numbers and parameters of PTDRSC potential. The solutions of wave functions and corresponding eigenvalues are only suitable for the PTDRSC potential.
文摘By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain size,phase composition,microstructure and crystallization process.The results show that the nanophase M-type Sr-ferrite prepared by this method is single,and its grain size is smaller than 100 nm.Moreover,most of the grains present hexagonal sheet shape.Tests are carried out for its attenuation to 1.06 mm laser.It is found that the extinction capability of the nanophase M-type Sr-ferrite smoke is good,and its mass extinction coefficient is 1.628 m2/g.
基金financially supported by the National Natural Science Foundation of China(No.51365014)the Industrial Support Key Project of Jiangxi Province,China(No.20161BBE50072)
