The micro-area characterization experiments like scanning Kelvin probe force microscope(SKPFM)and Kernel average misorientation have the defects of complex sample preparation and occasional errors in test results,whic...The micro-area characterization experiments like scanning Kelvin probe force microscope(SKPFM)and Kernel average misorientation have the defects of complex sample preparation and occasional errors in test results,which makes it impossible to accurately and quickly analyze the pitting behavior induced by inclusions in some cases,prompting attempts to turn to simulation calculation research.The method of calculating band structure and work function can be used to replace current-sensing atomic force microscopy and SKPFM to detect the potential and conductivity of the sample.The band structure results show that Al_(2)O_(3) inclusion is an insulator and non-conductive,and it will not form galvanic corrosion with the matrix.Al_(2)O_(3) inclusion does not dissolve because its work function is higher than that of the matrix.Moreover,the stress concentration of the matrix around the inclusion can be characterized by first-principles calculation coupled with finite element simulation.The results show that the stress concentration degree of the matrix around Al_(2)O_(3) inclusion is serious,and the galvanic corrosion is formed between the high and the low stress concentration areas,which can be used to explain the reason of the pitting induced by Al_(2)O_(3) inclusions.展开更多
The longitudinal cracks distributed along the dam axis in the corridor of a dam may have potential safety hazards.According to the detection results of crack depth and width and the analysis of monitoring data,a three...The longitudinal cracks distributed along the dam axis in the corridor of a dam may have potential safety hazards.According to the detection results of crack depth and width and the analysis of monitoring data,a three-dimensional finite element model is established for numerical simulation calculation and the influence of cracks on the safety of dam structure is analyzed from different aspects such as deformation,stress value,and distribution range.The calculation results show that the maximum principal tensile stress value and the location of the dam body are basically independent of the change of crack depth(within 1.0 m).Regarding local stress around the corridor,the high upstream water level causes cracks to deepen,resulting in an increase in the maximum tensile stress near the crack tip and an expansion of the tensile stress region.展开更多
The vacuum reactive wetting and brazing of Er_(2)Si_(2)O_(7)/MoSi_(2) coatings were investigated using a (CoFeNiCrMn)_(88)Nb_(12) high-entropy alloy (HEA) brazing filler. The microstructural evolution and wettability ...The vacuum reactive wetting and brazing of Er_(2)Si_(2)O_(7)/MoSi_(2) coatings were investigated using a (CoFeNiCrMn)_(88)Nb_(12) high-entropy alloy (HEA) brazing filler. The microstructural evolution and wettability of the HEA filler were analyzed, with particular attention to the surface energy, interfacial stability, and electronic properties of the HEA filler/rare earth silicate coating system, as determined by density functional theory (DFT). As Nb diffused into the interface and the ErNbO_(4) phase formed, the wetting angle gradually decreased to 23.12° The effective wetting and spreading of the HEA brazing filler on the rare earth silicate coating surface are strongly correlated with the formation of the ErNbO_(4) phase at the interface. Furthermore, DFT calculations reveal that the interfacial bonding energy between the BCC' and FCC' phases and the ErNbO_(4) phase, after the wetting reaction, is significantly higher than the bonding energy between the initial filler and Er_(2)Si_(2)O_(7). This finding suggests that the formation of the ErNbO_(4) phase improves the wetting and spreading behavior of the filler.展开更多
Steel-concrete composite beams,due to their superior mechanical properties,are widely utilized in engineering structures.This study systematically investigates the calculation methods for internal forces and load-bear...Steel-concrete composite beams,due to their superior mechanical properties,are widely utilized in engineering structures.This study systematically investigates the calculation methods for internal forces and load-bearing capacity of composite beams based on elastic theory,with a focus on the transformed section method and its application under varying neutral axis positions.By deriving the geometric characteristics of the transformed section and incorporating a reduction factor accounting for slip effects,a computational model for sectional stress and ultimate load-bearing capacity is established.The results demonstrate that the slip effect significantly influences the flexural load-bearing capacity of composite beams.The proposed reduction factor,which considers the influence of the steel beam’s top flange thickness,offers higher accuracy compared to traditional methods.These findings provide a theoretical foundation for the design and analysis of composite beams,with significant practical engineering value.展开更多
According to the hydraulic calculation principles of the orifice outflow, the discharge capacity of the columnar reversing gate under the partial opening condition was calculated and checked. Using ANSYS, a large fini...According to the hydraulic calculation principles of the orifice outflow, the discharge capacity of the columnar reversing gate under the partial opening condition was calculated and checked. Using ANSYS, a large finite element analysis software, the discharge process was simulated. The distribution rule of the velocities in the gate chamber and downstream channel was obtained. An FEM model of the columnar reversing gate was built, and the natural vibration properties of the gate were analyzed. Based on the Westergaard added mass method, the added mass caused by the fluid-structure coupling motion was taken into account, and the effects of the coupling interaction were discussed. The results show that the size of the small gates meets the demand for discharge capacity, the current in the gate chamber is quite turbulent, the trunnion and arms are obviously impacted by flow, and the effects of water on vibration characteristics are remarkable. The study provides a reference for the design and calculation of gates of the same type.展开更多
AIM:To investigate the effect of pharmacological pupil alterations on intraocular lens(IOL)power calculations.METHODS:A systematic review and Meta-analysis of studies published before December 2023 in the PubMed,Embas...AIM:To investigate the effect of pharmacological pupil alterations on intraocular lens(IOL)power calculations.METHODS:A systematic review and Meta-analysis of studies published before December 2023 in the PubMed,Embase,and Cochrane library databases on the accuracy of pharmacological pupil changes on IOL power calculation was performed.The primary outcome was the results of IOL power calculations before and after the use of medications.Subgroup analyses were performed based on participants’basic characteristics,such as age,axial length(AL),and whether miosis or mydriasis were used as classification criteria for further analyses.Each eligible study was evaluated for potential risk of bias by the AHRQ assessment scale.The study was registered on PROSPERO(CRD 42024497535).RESULTS:A total of 3062 eyes from 21 studies were eligible.There was no significant difference in the IOL power calculation before and after pharmacological pupil changes using any of the Hoffer Q(WMD=0.055,95%CI=-0.046–0.156;P=0.29),SRK/T(WMD=0.003,95%CI=-0.073–0.080;P=0.93),Haigis(WMD=-0.030,95%CI=-0.176–0.116;P=0.69),Holladay 2(WMD=-0.042,95%CI=-0.366–0.282;P=0.80),and Barrett Universal Ⅱ(WMD=0.033,95%CI=-0.061–0.127;P=0.49)formulas.On the measurement of parameters related to IOL power calculation,for either miosis or mydriasis AL(P=0.98 and 0.29,respectively),lens thickness(P=0.96 and 0.13,respectively),and mean keratometry(P=0.90 and 0.86,respectively)did not present significant differences,while anterior chamber depth(P=0.07 and<0.01,respectively)and white-to-white distance(P=0.01 and 0.04,respectively)changed significantly between the two measurements prior and posterior.At the same time,despite there being some participants with the difference between the before and after calculations greater than 0.5 diopter,there was no significant difference in the incidence rate between these formulas.CONCLUSION:There is no significant effect of pharmacological pupil changes on the IOL power calculation.It will considerably reduce the visit time burden for patients who require cataract surgery.展开更多
Composite dams,due to their combination of advantages from multiple dam types,are widely used under complex topographic and geological conditions.The static and dynamic stability of their spillway sections is crucial ...Composite dams,due to their combination of advantages from multiple dam types,are widely used under complex topographic and geological conditions.The static and dynamic stability of their spillway sections is crucial for project safety.This paper takes a composite dam as the research object and uses finite difference software FLAC^(3D) to perform static and dynamic calculation analysis on its No.12 and No.13 spillway sections.The static conditions consider normal water level and dead water level,while the dynamic conditions are based on free-field boundary conditions and Rayleigh damping,with an input peak acceleration of 0.15g artificial synthetic seismic wave(duration 10s),analyzing dam displacement and stress distribution.Based on relevant national standards and specifications,the analysis results show:Under static conditions,the dam displacement and stress distribution conform to conventional patterns,with the maximum horizontal displacement at the dam crest being 3.43mm,meeting safety requirements;The tensile stress near the hinged beam area is relatively large,suggesting strengthened reinforcement,with no other hazardous areas.Under dynamic conditions,the maximum relative dynamic displacement at the dam crest is 5.51mm,which is safe and controllable;The tensile stress at the junction of the weir crest and gate pier exceeds the dynamic tensile strength of concrete,and the tensile stress near the hinged beam is relatively high,requiring strengthened reinforcement,with no other hazardous areas.The study indicates that the dam structure design generally meets safety requirements,but local high tensile stress areas need optimized reinforcement design.展开更多
To explain the influence mechanism of MgO on the consolidation and reduction characteristics of roasted iron pellets,the properties and structure of pellets were investigated from multi-dimensions.It indicated that th...To explain the influence mechanism of MgO on the consolidation and reduction characteristics of roasted iron pellets,the properties and structure of pellets were investigated from multi-dimensions.It indicated that the MgO addition decreased the reduction swelling index(RSI)and reduction degree of pellets in both CO and H_(2)atmospheres.During the stepwise reduction process of Fe2O3→Fe3O4→FeO,the reduction behaviour of pellets in CO and H_(2)was similar,while the reduction rate of pellets in H_(2)atmosphere was almost twice as high as that in CO atmosphere.During the stepwise reduction process of FeO→Fe,the RSI of pellets showed a logarithmic increase in CO atmosphere and a linear decrease in H_(2)atmosphere.As investigated by first-principles calculations,C and Fe mainly formed chemical bonds,and the CO reduction process released energy,promoting the formation of iron whiskers.However,H and Fe produced weak physical adsorption,and the H_(2)reduction process was endothermic,inhibiting the generation of iron whiskers.With Mg2+doping in FexO,the nucleation region of iron whiskers expanded in CO reduction process,and the morphology of iron whiskers transformed from“slender”to“stocky,”reducing RSI of the pellets.展开更多
Groundwater reservoir is a kind of important engineering, which can optimize water resources arran- gement by means of artificial regulation. Regulated water is the blood and value performance of groundwater reservoir...Groundwater reservoir is a kind of important engineering, which can optimize water resources arran- gement by means of artificial regulation. Regulated water is the blood and value performance of groundwater reservoir. To resolve the problem of real-time quantification of regulated water, the paper analyzed sources and compositions of regulated water in detail. Then, under the conditions of satisfying water demand inside research area, the paper analyzed quantity available and regulation coefficient of different regulated water and established a formula to calculate regulated water. At last, based on a pore groundwater reservoir in the middle reaches of the Yinma River, Jilin Province, the paper calculated regulated water with the formula and the result shows that the method is feasible. With some constraint conditions, the formula can be adopted in other similar areas.展开更多
Tooth cracks may occur in spiral bevel gear transmission system of the aerospace equipment.In this study,an accurate and efficient loaded tooth contact analysis(LTCA)model is developed to predict the contact behavior ...Tooth cracks may occur in spiral bevel gear transmission system of the aerospace equipment.In this study,an accurate and efficient loaded tooth contact analysis(LTCA)model is developed to predict the contact behavior and time-varying meshing stiffness(TVMS)of spiral bevel gear pair with cracked tooth.The tooth is sliced,and the contact points on slices are computed using roll angle surfaces.Considering the geometric complexity of crack surface,a set of procedures is formulated to generate spatial crack and determine crack parameters for contact points.According to the positional relationship between contact point and crack path,each sliced tooth is modeled as a non-uniform cantilever beam with varying reduced effective load-bearing tooth thickness.Then the compliance model of the cracked tooth is established to perform contact analysis,along with TVMS calculations utilizing three different models.By employing spiral bevel gear pairs with distinct types of cracks as examples,the accuracy and efficiency of the developed approach are validated via comparative analyses with finite element analysis(FEA)outcomes.Furthermore,the investigation on effects of cracks shows that tooth cracks can induce alterations in meshing performance of both entire gear pair and individual tooth pairs,including not only cracked tooth pair but also adjacent non-cracked tooth pairs.Hence,the proposed model can serve as a useful tool for analyzing the variations in contact behavior and meshing stiffness of spiral bevel gears due to different cracks.展开更多
Under the condition of steady state, the pressure drop of coolant is mainly caused by friction along the cable. In the CICC (cable-in-conduit-conductor), helium flow within the conductor consists of two parallel inter...Under the condition of steady state, the pressure drop of coolant is mainly caused by friction along the cable. In the CICC (cable-in-conduit-conductor), helium flow within the conductor consists of two parallel interconnected tubes. The velocity distribution has some differece between the central channel and conductor space. The region of Reynolds number is from 103 to 106. This paper describes the calculation of pressure drop of HT-7U CICC at various mass flows. It is assumed that the coolant flows in two parallel, rough tubes during the calculation.展开更多
To evaluate the overall effect of the neck and torso on the head-related transfer function(HRTF),a simplified head-neck-torso(HNT)model,which consists of a spherical head,spherical torso and cylindrical neck,is propos...To evaluate the overall effect of the neck and torso on the head-related transfer function(HRTF),a simplified head-neck-torso(HNT)model,which consists of a spherical head,spherical torso and cylindrical neck,is proposed and the corresponding HRTFs are calculated using the boundary element method(BEM).The results indicate that the HRTF magnitudes for the HNT model are different from those of the existing spherical head-and-torso model(HAT)above 0.5 kHz,especially in the near-field and contralateral region.The discrepancy in the HRTF magnitudes leads to a discrepancy in the interaural level differences(ILDs)for the HNT and HAT models,which reaches a level of-l0dB at source distance of 0.2m.As the source distance increases,the discrepancy in the results of the HNT and HAT models reduces.Measurement on practical HNT and HAT models validates the analysis.Therefore,the neck influences near-field HRTFs and should be included in the near-field HRTF calculation.展开更多
Based on the concept of structural passive control,a new type of slit shear wall,with improved seismic performance when compared to an ordinary solid shear wall,was proposed by the authors in 1996.The idea has been ve...Based on the concept of structural passive control,a new type of slit shear wall,with improved seismic performance when compared to an ordinary solid shear wall,was proposed by the authors in 1996.The idea has been verified by a series of pseudo-static and dynamic tests.In this paper a macro numerical model is developed for the wall element and the energy dissipation device.Then,nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table.Furthermore,the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model,and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy.Finally,according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response,the optimal analysis is carried out to select design parameters for the energy dissipation device.展开更多
The HT-7U super-conducting tokamak is a full super-conducting magnetically confined fusion device, It mainly consists of super-conducting toroidal field (TF) coils and super conducting poloidal field (PF) coils. This...The HT-7U super-conducting tokamak is a full super-conducting magnetically confined fusion device, It mainly consists of super-conducting toroidal field (TF) coils and super conducting poloidal field (PF) coils. This paper describes the distribution of magnetic field, ripple and electromagnetic loads of TF system, some results are necessary to analyze and calculate the stresses and deformation on TF system by a finite element method. Meanwhile, in this paper, the main scope of the calculation is carried out for the case of constant magnetic field on conductor of the TF coil winding in order to provide electromagnet parameters for the quench analysis of Cable-in-Conduit Conductor (CICC) of TF system in HT-7U.展开更多
The adaptive FEM analysis of the temperature field of the piston in one diesel engine is given by using the ANSYS software. By making full use of the post results provided by the software, the posteriori error estimat...The adaptive FEM analysis of the temperature field of the piston in one diesel engine is given by using the ANSYS software. By making full use of the post results provided by the software, the posteriori error estimation and adaptive accuracy meshing algorithm is developed. So the blindness of the mesh design through experiences can be avoided, and the accuracy requirement is adapted to the relative temperature gradient distribution across the entire domain. Therefore the meshes and solutions can be obtained at the same time. Based on the temperature field analysis, the thermal stress and deformation fields are calculated as well. The results show that the stress concentrates on the edge of the piston pin boss and the inside surface of the first ring groove, and the deformation of the head of the piston is greatest. But the difference between the long and short axes of the bottom cross section is greatest.展开更多
To know the temperature status of track and wheels on tank,the finite element calculation of temperature field was implemented with ANSYS software.The detailed temperature distributions for road wheel,drive wheel,idle...To know the temperature status of track and wheels on tank,the finite element calculation of temperature field was implemented with ANSYS software.The detailed temperature distributions for road wheel,drive wheel,idle wheel and track loop were obtained.The effect of factors,such as tank speed,environment temperature,sun radiant energy,ground deformation resistant and tank load,on the temperature of road wheel was studied.The sensitivity analysis shows that the effect of tank load on the temperature is the most,and the effect of ground deformation resistant is the least.The temperature testing device for road wheel on tank was developed to perform the experiments in real time.The calculated temperatures are in accord well with the experimental values.展开更多
The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaT...The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaTiO33 perovskite phase stabilizer. Then, x-ray absorption spectroscopy and density functional theory are employed to calculate the local structure configuration and formation energy of the prepared samples. Ba2＋ is found to replace Pb2＋ in AA-site with Zn2＋ occupying BB-site in Pb（Zn1/3Nb2/3）O3, while in the neighboring structure, Ti4＋4＋ replaces Nb5＋5＋ in BB-site with Pb2＋2＋ occupying AA-site. With the substitution of BaTiO33 in Pb（Zn1/3Nb2/3）O3, the bond length between Zn2＋ and Pb2＋ is longer than that of the typical perovskite phase of Pb（Zn1/3Nb2/3）O3. This indicates the key role of BaTiO33 in decreasing the steric hindrance of Pb2＋ lone pair, and the mutual interactions between Pb2＋ lone pair and Zn2＋ and the formation energy is seen to decrease. This finding of the formation energy and local structure configuration relationship can further extend a fundamental understanding of the role of BaTiO33 in stabilizing the perovskite phase in PbZn13Nb23O3-based materials, which in turn will lead to an improved preparation technique for desired electrical properties.展开更多
Aiming at the disadvantages of low efficiency and high cost in traditional measurement and calculation of crushed stone volume, this paper applies the unmanned aerial vehicle tilt technology to the calculation of crus...Aiming at the disadvantages of low efficiency and high cost in traditional measurement and calculation of crushed stone volume, this paper applies the unmanned aerial vehicle tilt technology to the calculation of crushed stone volume. In this paper, the process of the application of this technology to the calculation of crushed stone volume is described in detail. Taking the calculation of crushed stone volume of a certain project as an example, a detailed comparison is made with the traditional calculation method of crushed stone volume. Finally, the applicability and feasibility of the application of UAV inclination technology to the calculation of crushed stone volume are verified. As the construction progress goes on, the quantity of crushed stone to be purchased needs to be calculated based on the quantity of crushed stone already produced.展开更多
Using the Monte Carlo transport code MCNP, neutronic calculation analysis for China helium cooled ceramic breeder test blanket module （CN HCCB TBM） and the associated shield block （together called TBM-set） has bee...Using the Monte Carlo transport code MCNP, neutronic calculation analysis for China helium cooled ceramic breeder test blanket module （CN HCCB TBM） and the associated shield block （together called TBM-set） has been carried out based on the latest design of HCCB TBM-set and C-lite model. Key nuclear responses of HCCB TBM-set, such as the neutron flux, tritium production rate, nuclear heating and radiation damage, have been obtained and discussed. These nuclear performance data can be used as the basic input data for other analyses of HCCB TBM-set, such as thermal-hydraulics~ thermal-mechanics and safety analysis.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52364044 and 52204364)Central Guidance on Local Science and Technology Development Fund Projects of Inner Mongolia Autonomous Region(No.2022ZY0090)Basic Scientific Research Business Expenses of Colleges and Universities in Inner Mongolia Autonomous Region(Nos.2023QNJS011 and 0406082226).
文摘The micro-area characterization experiments like scanning Kelvin probe force microscope(SKPFM)and Kernel average misorientation have the defects of complex sample preparation and occasional errors in test results,which makes it impossible to accurately and quickly analyze the pitting behavior induced by inclusions in some cases,prompting attempts to turn to simulation calculation research.The method of calculating band structure and work function can be used to replace current-sensing atomic force microscopy and SKPFM to detect the potential and conductivity of the sample.The band structure results show that Al_(2)O_(3) inclusion is an insulator and non-conductive,and it will not form galvanic corrosion with the matrix.Al_(2)O_(3) inclusion does not dissolve because its work function is higher than that of the matrix.Moreover,the stress concentration of the matrix around the inclusion can be characterized by first-principles calculation coupled with finite element simulation.The results show that the stress concentration degree of the matrix around Al_(2)O_(3) inclusion is serious,and the galvanic corrosion is formed between the high and the low stress concentration areas,which can be used to explain the reason of the pitting induced by Al_(2)O_(3) inclusions.
基金Zhejiang Provincial Natural Science Foundation of China for Young Scholars(Project No.:LQ20A020009)National College Students’Innovation and Entrepreneurship Training Program(Project No.:202311842014X)。
文摘The longitudinal cracks distributed along the dam axis in the corridor of a dam may have potential safety hazards.According to the detection results of crack depth and width and the analysis of monitoring data,a three-dimensional finite element model is established for numerical simulation calculation and the influence of cracks on the safety of dam structure is analyzed from different aspects such as deformation,stress value,and distribution range.The calculation results show that the maximum principal tensile stress value and the location of the dam body are basically independent of the change of crack depth(within 1.0 m).Regarding local stress around the corridor,the high upstream water level causes cracks to deepen,resulting in an increase in the maximum tensile stress near the crack tip and an expansion of the tensile stress region.
基金support from the National Natural Science Foundation of China(No.52374402)the National Key Research and Development Program(No.2022YFB3402200)+2 种基金the National Science and Technology Major Project(No.J2022-VII-0003-0045)the Project of Key areas of innovation team in Shaanxi Province(No.2024RS-CXTD-20)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX2024055).
文摘The vacuum reactive wetting and brazing of Er_(2)Si_(2)O_(7)/MoSi_(2) coatings were investigated using a (CoFeNiCrMn)_(88)Nb_(12) high-entropy alloy (HEA) brazing filler. The microstructural evolution and wettability of the HEA filler were analyzed, with particular attention to the surface energy, interfacial stability, and electronic properties of the HEA filler/rare earth silicate coating system, as determined by density functional theory (DFT). As Nb diffused into the interface and the ErNbO_(4) phase formed, the wetting angle gradually decreased to 23.12° The effective wetting and spreading of the HEA brazing filler on the rare earth silicate coating surface are strongly correlated with the formation of the ErNbO_(4) phase at the interface. Furthermore, DFT calculations reveal that the interfacial bonding energy between the BCC' and FCC' phases and the ErNbO_(4) phase, after the wetting reaction, is significantly higher than the bonding energy between the initial filler and Er_(2)Si_(2)O_(7). This finding suggests that the formation of the ErNbO_(4) phase improves the wetting and spreading behavior of the filler.
文摘Steel-concrete composite beams,due to their superior mechanical properties,are widely utilized in engineering structures.This study systematically investigates the calculation methods for internal forces and load-bearing capacity of composite beams based on elastic theory,with a focus on the transformed section method and its application under varying neutral axis positions.By deriving the geometric characteristics of the transformed section and incorporating a reduction factor accounting for slip effects,a computational model for sectional stress and ultimate load-bearing capacity is established.The results demonstrate that the slip effect significantly influences the flexural load-bearing capacity of composite beams.The proposed reduction factor,which considers the influence of the steel beam’s top flange thickness,offers higher accuracy compared to traditional methods.These findings provide a theoretical foundation for the design and analysis of composite beams,with significant practical engineering value.
文摘According to the hydraulic calculation principles of the orifice outflow, the discharge capacity of the columnar reversing gate under the partial opening condition was calculated and checked. Using ANSYS, a large finite element analysis software, the discharge process was simulated. The distribution rule of the velocities in the gate chamber and downstream channel was obtained. An FEM model of the columnar reversing gate was built, and the natural vibration properties of the gate were analyzed. Based on the Westergaard added mass method, the added mass caused by the fluid-structure coupling motion was taken into account, and the effects of the coupling interaction were discussed. The results show that the size of the small gates meets the demand for discharge capacity, the current in the gate chamber is quite turbulent, the trunnion and arms are obviously impacted by flow, and the effects of water on vibration characteristics are remarkable. The study provides a reference for the design and calculation of gates of the same type.
基金Supported by Beijing Natural Science Foundation from Beijing Municipal Government(No.7202030).
文摘AIM:To investigate the effect of pharmacological pupil alterations on intraocular lens(IOL)power calculations.METHODS:A systematic review and Meta-analysis of studies published before December 2023 in the PubMed,Embase,and Cochrane library databases on the accuracy of pharmacological pupil changes on IOL power calculation was performed.The primary outcome was the results of IOL power calculations before and after the use of medications.Subgroup analyses were performed based on participants’basic characteristics,such as age,axial length(AL),and whether miosis or mydriasis were used as classification criteria for further analyses.Each eligible study was evaluated for potential risk of bias by the AHRQ assessment scale.The study was registered on PROSPERO(CRD 42024497535).RESULTS:A total of 3062 eyes from 21 studies were eligible.There was no significant difference in the IOL power calculation before and after pharmacological pupil changes using any of the Hoffer Q(WMD=0.055,95%CI=-0.046–0.156;P=0.29),SRK/T(WMD=0.003,95%CI=-0.073–0.080;P=0.93),Haigis(WMD=-0.030,95%CI=-0.176–0.116;P=0.69),Holladay 2(WMD=-0.042,95%CI=-0.366–0.282;P=0.80),and Barrett Universal Ⅱ(WMD=0.033,95%CI=-0.061–0.127;P=0.49)formulas.On the measurement of parameters related to IOL power calculation,for either miosis or mydriasis AL(P=0.98 and 0.29,respectively),lens thickness(P=0.96 and 0.13,respectively),and mean keratometry(P=0.90 and 0.86,respectively)did not present significant differences,while anterior chamber depth(P=0.07 and<0.01,respectively)and white-to-white distance(P=0.01 and 0.04,respectively)changed significantly between the two measurements prior and posterior.At the same time,despite there being some participants with the difference between the before and after calculations greater than 0.5 diopter,there was no significant difference in the incidence rate between these formulas.CONCLUSION:There is no significant effect of pharmacological pupil changes on the IOL power calculation.It will considerably reduce the visit time burden for patients who require cataract surgery.
文摘Composite dams,due to their combination of advantages from multiple dam types,are widely used under complex topographic and geological conditions.The static and dynamic stability of their spillway sections is crucial for project safety.This paper takes a composite dam as the research object and uses finite difference software FLAC^(3D) to perform static and dynamic calculation analysis on its No.12 and No.13 spillway sections.The static conditions consider normal water level and dead water level,while the dynamic conditions are based on free-field boundary conditions and Rayleigh damping,with an input peak acceleration of 0.15g artificial synthetic seismic wave(duration 10s),analyzing dam displacement and stress distribution.Based on relevant national standards and specifications,the analysis results show:Under static conditions,the dam displacement and stress distribution conform to conventional patterns,with the maximum horizontal displacement at the dam crest being 3.43mm,meeting safety requirements;The tensile stress near the hinged beam area is relatively large,suggesting strengthened reinforcement,with no other hazardous areas.Under dynamic conditions,the maximum relative dynamic displacement at the dam crest is 5.51mm,which is safe and controllable;The tensile stress at the junction of the weir crest and gate pier exceeds the dynamic tensile strength of concrete,and the tensile stress near the hinged beam is relatively high,requiring strengthened reinforcement,with no other hazardous areas.The study indicates that the dam structure design generally meets safety requirements,but local high tensile stress areas need optimized reinforcement design.
基金support from the National Natural Science Foundation of China(52174290).
文摘To explain the influence mechanism of MgO on the consolidation and reduction characteristics of roasted iron pellets,the properties and structure of pellets were investigated from multi-dimensions.It indicated that the MgO addition decreased the reduction swelling index(RSI)and reduction degree of pellets in both CO and H_(2)atmospheres.During the stepwise reduction process of Fe2O3→Fe3O4→FeO,the reduction behaviour of pellets in CO and H_(2)was similar,while the reduction rate of pellets in H_(2)atmosphere was almost twice as high as that in CO atmosphere.During the stepwise reduction process of FeO→Fe,the RSI of pellets showed a logarithmic increase in CO atmosphere and a linear decrease in H_(2)atmosphere.As investigated by first-principles calculations,C and Fe mainly formed chemical bonds,and the CO reduction process released energy,promoting the formation of iron whiskers.However,H and Fe produced weak physical adsorption,and the H_(2)reduction process was endothermic,inhibiting the generation of iron whiskers.With Mg2+doping in FexO,the nucleation region of iron whiskers expanded in CO reduction process,and the morphology of iron whiskers transformed from“slender”to“stocky,”reducing RSI of the pellets.
基金Under the auspices of Scientific & Technological Development Project of Science & Technology Office, JilinProvince (No. 200104032)
文摘Groundwater reservoir is a kind of important engineering, which can optimize water resources arran- gement by means of artificial regulation. Regulated water is the blood and value performance of groundwater reservoir. To resolve the problem of real-time quantification of regulated water, the paper analyzed sources and compositions of regulated water in detail. Then, under the conditions of satisfying water demand inside research area, the paper analyzed quantity available and regulation coefficient of different regulated water and established a formula to calculate regulated water. At last, based on a pore groundwater reservoir in the middle reaches of the Yinma River, Jilin Province, the paper calculated regulated water with the formula and the result shows that the method is feasible. With some constraint conditions, the formula can be adopted in other similar areas.
基金co-supported by the National Natural Science Foundation of China (No. 52175104)the Postdoctoral Fellowship Program of CPSF (No. GZC20233008)
文摘Tooth cracks may occur in spiral bevel gear transmission system of the aerospace equipment.In this study,an accurate and efficient loaded tooth contact analysis(LTCA)model is developed to predict the contact behavior and time-varying meshing stiffness(TVMS)of spiral bevel gear pair with cracked tooth.The tooth is sliced,and the contact points on slices are computed using roll angle surfaces.Considering the geometric complexity of crack surface,a set of procedures is formulated to generate spatial crack and determine crack parameters for contact points.According to the positional relationship between contact point and crack path,each sliced tooth is modeled as a non-uniform cantilever beam with varying reduced effective load-bearing tooth thickness.Then the compliance model of the cracked tooth is established to perform contact analysis,along with TVMS calculations utilizing three different models.By employing spiral bevel gear pairs with distinct types of cracks as examples,the accuracy and efficiency of the developed approach are validated via comparative analyses with finite element analysis(FEA)outcomes.Furthermore,the investigation on effects of cracks shows that tooth cracks can induce alterations in meshing performance of both entire gear pair and individual tooth pairs,including not only cracked tooth pair but also adjacent non-cracked tooth pairs.Hence,the proposed model can serve as a useful tool for analyzing the variations in contact behavior and meshing stiffness of spiral bevel gears due to different cracks.
基金This work was supported by the National Meg-science Engineering Project of the Chinese Government.
文摘Under the condition of steady state, the pressure drop of coolant is mainly caused by friction along the cable. In the CICC (cable-in-conduit-conductor), helium flow within the conductor consists of two parallel interconnected tubes. The velocity distribution has some differece between the central channel and conductor space. The region of Reynolds number is from 103 to 106. This paper describes the calculation of pressure drop of HT-7U CICC at various mass flows. It is assumed that the coolant flows in two parallel, rough tubes during the calculation.
基金Supported by the National Natural Science Foundation of China for Young Scholars(No 11104082)the Natural Science Foundation of Guangdong Province(No x2lxB6100320)+1 种基金the Foundation for Distinguished Young Talents in Higher Education of Guangdong Province(FDYT,No LYM10012)the Fundamental Research Funds for the Central Universities(No 2011ZM0092).
文摘To evaluate the overall effect of the neck and torso on the head-related transfer function(HRTF),a simplified head-neck-torso(HNT)model,which consists of a spherical head,spherical torso and cylindrical neck,is proposed and the corresponding HRTFs are calculated using the boundary element method(BEM).The results indicate that the HRTF magnitudes for the HNT model are different from those of the existing spherical head-and-torso model(HAT)above 0.5 kHz,especially in the near-field and contralateral region.The discrepancy in the HRTF magnitudes leads to a discrepancy in the interaural level differences(ILDs)for the HNT and HAT models,which reaches a level of-l0dB at source distance of 0.2m.As the source distance increases,the discrepancy in the results of the HNT and HAT models reduces.Measurement on practical HNT and HAT models validates the analysis.Therefore,the neck influences near-field HRTFs and should be included in the near-field HRTF calculation.
文摘Based on the concept of structural passive control,a new type of slit shear wall,with improved seismic performance when compared to an ordinary solid shear wall,was proposed by the authors in 1996.The idea has been verified by a series of pseudo-static and dynamic tests.In this paper a macro numerical model is developed for the wall element and the energy dissipation device.Then,nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table.Furthermore,the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model,and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy.Finally,according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response,the optimal analysis is carried out to select design parameters for the energy dissipation device.
文摘The HT-7U super-conducting tokamak is a full super-conducting magnetically confined fusion device, It mainly consists of super-conducting toroidal field (TF) coils and super conducting poloidal field (PF) coils. This paper describes the distribution of magnetic field, ripple and electromagnetic loads of TF system, some results are necessary to analyze and calculate the stresses and deformation on TF system by a finite element method. Meanwhile, in this paper, the main scope of the calculation is carried out for the case of constant magnetic field on conductor of the TF coil winding in order to provide electromagnet parameters for the quench analysis of Cable-in-Conduit Conductor (CICC) of TF system in HT-7U.
文摘The adaptive FEM analysis of the temperature field of the piston in one diesel engine is given by using the ANSYS software. By making full use of the post results provided by the software, the posteriori error estimation and adaptive accuracy meshing algorithm is developed. So the blindness of the mesh design through experiences can be avoided, and the accuracy requirement is adapted to the relative temperature gradient distribution across the entire domain. Therefore the meshes and solutions can be obtained at the same time. Based on the temperature field analysis, the thermal stress and deformation fields are calculated as well. The results show that the stress concentrates on the edge of the piston pin boss and the inside surface of the first ring groove, and the deformation of the head of the piston is greatest. But the difference between the long and short axes of the bottom cross section is greatest.
文摘To know the temperature status of track and wheels on tank,the finite element calculation of temperature field was implemented with ANSYS software.The detailed temperature distributions for road wheel,drive wheel,idle wheel and track loop were obtained.The effect of factors,such as tank speed,environment temperature,sun radiant energy,ground deformation resistant and tank load,on the temperature of road wheel was studied.The sensitivity analysis shows that the effect of tank load on the temperature is the most,and the effect of ground deformation resistant is the least.The temperature testing device for road wheel on tank was developed to perform the experiments in real time.The calculated temperatures are in accord well with the experimental values.
基金Supported by the Thailand Research Fund under Grant No TRG5880097
文摘The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaTiO33 perovskite phase stabilizer. Then, x-ray absorption spectroscopy and density functional theory are employed to calculate the local structure configuration and formation energy of the prepared samples. Ba2＋ is found to replace Pb2＋ in AA-site with Zn2＋ occupying BB-site in Pb（Zn1/3Nb2/3）O3, while in the neighboring structure, Ti4＋4＋ replaces Nb5＋5＋ in BB-site with Pb2＋2＋ occupying AA-site. With the substitution of BaTiO33 in Pb（Zn1/3Nb2/3）O3, the bond length between Zn2＋ and Pb2＋ is longer than that of the typical perovskite phase of Pb（Zn1/3Nb2/3）O3. This indicates the key role of BaTiO33 in decreasing the steric hindrance of Pb2＋ lone pair, and the mutual interactions between Pb2＋ lone pair and Zn2＋ and the formation energy is seen to decrease. This finding of the formation energy and local structure configuration relationship can further extend a fundamental understanding of the role of BaTiO33 in stabilizing the perovskite phase in PbZn13Nb23O3-based materials, which in turn will lead to an improved preparation technique for desired electrical properties.
文摘Aiming at the disadvantages of low efficiency and high cost in traditional measurement and calculation of crushed stone volume, this paper applies the unmanned aerial vehicle tilt technology to the calculation of crushed stone volume. In this paper, the process of the application of this technology to the calculation of crushed stone volume is described in detail. Taking the calculation of crushed stone volume of a certain project as an example, a detailed comparison is made with the traditional calculation method of crushed stone volume. Finally, the applicability and feasibility of the application of UAV inclination technology to the calculation of crushed stone volume are verified. As the construction progress goes on, the quantity of crushed stone to be purchased needs to be calculated based on the quantity of crushed stone already produced.
基金supported by the Major State Basic Research Development Program of China(973 Program)(No.2013GB108000)
文摘Using the Monte Carlo transport code MCNP, neutronic calculation analysis for China helium cooled ceramic breeder test blanket module （CN HCCB TBM） and the associated shield block （together called TBM-set） has been carried out based on the latest design of HCCB TBM-set and C-lite model. Key nuclear responses of HCCB TBM-set, such as the neutron flux, tritium production rate, nuclear heating and radiation damage, have been obtained and discussed. These nuclear performance data can be used as the basic input data for other analyses of HCCB TBM-set, such as thermal-hydraulics~ thermal-mechanics and safety analysis.
