To improve the efficiency and accuracy of path planning for fan inspection tasks in thermal power plants,this paper proposes an intelligent inspection robot path planning scheme based on an improved A^(*)algorithm.The...To improve the efficiency and accuracy of path planning for fan inspection tasks in thermal power plants,this paper proposes an intelligent inspection robot path planning scheme based on an improved A^(*)algorithm.The inspection robot utilizes multiple sensors to monitor key parameters of the fans,such as vibration,noise,and bearing temperature,and upload the data to the monitoring center.The robot’s inspection path employs the improved A^(*)algorithm,incorporating obstacle penalty terms,path reconstruction,and smoothing optimization techniques,thereby achieving optimal path planning for the inspection robot in complex environments.Simulation results demonstrate that the improved A^(*)algorithm significantly outperforms the traditional A^(*)algorithm in terms of total path distance,smoothness,and detour rate,effectively improving the execution efficiency of inspection tasks.展开更多
Smallholder farming in West Africa faces various challenges, such as limited access to seeds, fertilizers, modern mechanization, and agricultural climate services. Crop productivity obtained under these conditions var...Smallholder farming in West Africa faces various challenges, such as limited access to seeds, fertilizers, modern mechanization, and agricultural climate services. Crop productivity obtained under these conditions varies significantly from one farmer to another, making it challenging to accurately estimate crop production through crop models. This limitation has implications for the reliability of using crop models as agricultural decision-making support tools. To support decision making in agriculture, an approach combining a genetic algorithm (GA) with the crop model AquaCrop is proposed for a location-specific calibration of maize cropping. In this approach, AquaCrop is used to simulate maize crop yield while the GA is used to derive optimal parameters set at grid cell resolution from various combinations of cultivar parameters and crop management in the process of crop and management options calibration. Statistics on pairwise simulated and observed yields indicate that the coefficient of determination varies from 0.20 to 0.65, with a yield deviation ranging from 8% to 36% across Burkina Faso (BF). An analysis of the optimal parameter sets shows that regardless of the climatic zone, a base temperature of 10˚C and an upper temperature of 32˚C is observed in at least 50% of grid cells. The growing season length and the harvest index vary significantly across BF, with the highest values found in the Soudanian zone and the lowest values in the Sahelian zone. Regarding management strategies, the fertility mean rate is approximately 35%, 39%, and 49% for the Sahelian, Soudano-sahelian, and Soudanian zones, respectively. The mean weed cover is around 36%, with the Sahelian and Soudano-sahelian zones showing the highest variability. The proposed approach can be an alternative to the conventional one-size-fits-all approach commonly used for regional crop modeling. Moreover, it has the potential to explore the performance of cropping strategies to adapt to changing climate conditions.展开更多
Wind farm layout optimization is a critical challenge in renewable energy development,especially in regions with complex terrain.Micro-siting of wind turbines has a significant impact on the overall efficiency and eco...Wind farm layout optimization is a critical challenge in renewable energy development,especially in regions with complex terrain.Micro-siting of wind turbines has a significant impact on the overall efficiency and economic viability of wind farm,where the wake effect,wind speed,types of wind turbines,etc.,have an impact on the output power of the wind farm.To solve the optimization problem of wind farm layout under complex terrain conditions,this paper proposes wind turbine layout optimization using different types of wind turbines,the aim is to reduce the influence of the wake effect and maximize economic benefits.The linear wake model is used for wake flow calculation over complex terrain.Minimizing the unit energy cost is taken as the objective function,considering that the objective function is affected by cost and output power,which influence each other.The cost function includes construction cost,installation cost,maintenance cost,etc.Therefore,a bi-level constrained optimization model is established,in which the upper-level objective function is to minimize the unit energy cost,and the lower-level objective function is to maximize the output power.Then,a hybrid evolutionary algorithm is designed according to the characteristics of the decision variables.The improved genetic algorithm and differential evolution are used to optimize the upper-level and lower-level objective functions,respectively,these evolutionary operations search for the optimal solution as much as possible.Finally,taking the roughness of different terrain,wind farms of different scales and different types of wind turbines as research scenarios,the optimal deployment is solved by using the algorithm in this paper,and four algorithms are compared to verify the effectiveness of the proposed algorithm.展开更多
This paper presents an Eulerian-Lagrangian algorithm for direct numerical simulation(DNS)of particle-laden flows.The algorithm is applicable to perform simulations of dilute suspensions of small inertial particles in ...This paper presents an Eulerian-Lagrangian algorithm for direct numerical simulation(DNS)of particle-laden flows.The algorithm is applicable to perform simulations of dilute suspensions of small inertial particles in turbulent carrier flow.The Eulerian framework numerically resolves turbulent carrier flow using a parallelized,finite-volume DNS solver on a staggered Cartesian grid.Particles are tracked using a point-particle method utilizing a Lagrangian particle tracking(LPT)algorithm.The proposed Eulerian-Lagrangian algorithm is validated using an inertial particle-laden turbulent channel flow for different Stokes number cases.The particle concentration profiles and higher-order statistics of the carrier and dispersed phases agree well with the benchmark results.We investigated the effect of fluid velocity interpolation and numerical integration schemes of particle tracking algorithms on particle dispersion statistics.The suitability of fluid velocity interpolation schemes for predicting the particle dispersion statistics is discussed in the framework of the particle tracking algorithm coupled to the finite-volume solver.In addition,we present parallelization strategies implemented in the algorithm and evaluate their parallel performance.展开更多
Nonlinear wavefront shaping is crucial for advancing optical technologies,enabling applications in optical computation,information processing,and imaging.However,a significant challenge is that once a metasurface is f...Nonlinear wavefront shaping is crucial for advancing optical technologies,enabling applications in optical computation,information processing,and imaging.However,a significant challenge is that once a metasurface is fabricated,the nonlinear wavefront it generates is fixed,offering little flexibility.This limitation often necessitates the fabrication of different metasurfaces for different wavefronts,which is both time-consuming and inefficient.To address this,we combine evolutionary algorithms with spatial light modulators(SLMs)to dynamically control wavefronts using a single metasurface,reducing the need for multiple fabrications and enabling the generation of arbitrary nonlinear wavefront patterns without requiring complicated optical alignment.We demonstrate this approach by introducing a genetic algorithm(GA)to manipulate visible wavefronts converted from near-infrared light via third-harmonic generation(THG)in a silicon metasurface.The Si metasurface supports multipolar Mie resonances that strongly enhance light-matter interactions,thereby significantly boosting THG emission at resonant positions.Additionally,the cubic relationship between THG emission and the infrared input reduces noise in the diffractive patterns produced by the SLM.This allows for precise experimental engineering of the nonlinear emission patterns with fewer alignment constraints.Our approach paves the way for self-optimized nonlinear wavefront shaping,advancing optical computation and information processing techniques.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing...Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing.However,elastic coding lenses(ECLs)still suffer from low focusing performance,thickness comparable to wavelength,and frequency sensitivity.Here,we consider both the structural and material properties of the coding unit,thus realizing further compression of the thickness of the ECL.We chose the simplest ECL,which consists of only two encoding units.The coding unit 0 is a straight structure constructed using a carbon fiber reinforced composite material,and the coding unit 1 is a zigzag structure constructed using an aluminum material,and the thickness of the ECL constructed using them is only 1/8 of the wavelength.Based on the theoretical design,the arrangement of coding units is further optimized using genetic algorithms,which significantly improves the focusing performance of the lens at different focus and frequencies.This study provides a more effective way to control vibration and noise in advanced structures.展开更多
As a complicated optimization problem,parallel batch processing machines scheduling problem(PBPMSP)exists in many real-life manufacturing industries such as textiles and semiconductors.Machine eligibility means that a...As a complicated optimization problem,parallel batch processing machines scheduling problem(PBPMSP)exists in many real-life manufacturing industries such as textiles and semiconductors.Machine eligibility means that at least one machine is not eligible for at least one job.PBPMSP and scheduling problems with machine eligibility are frequently considered;however,PBPMSP with machine eligibility is seldom explored.This study investigates PBPMSP with machine eligibility in fabric dyeing and presents a novel shuffled frog-leaping algorithm with competition(CSFLA)to minimize makespan.In CSFLA,the initial population is produced in a heuristic and random way,and the competitive search of memeplexes comprises two phases.Competition between any two memeplexes is done in the first phase,then iteration times are adjusted based on competition,and search strategies are adjusted adaptively based on the evolution quality of memeplexes in the second phase.An adaptive population shuffling is given.Computational experiments are conducted on 100 instances.The computational results showed that the new strategies of CSFLA are effective and that CSFLA has promising advantages in solving the considered PBPMSP.展开更多
A well-designed production schedule for cold rolling can enhance steel enterprises'operational efficiency and profitability.Nevertheless,the intricate constraints and numerous steps involved in cold rolling pose c...A well-designed production schedule for cold rolling can enhance steel enterprises'operational efficiency and profitability.Nevertheless,the intricate constraints and numerous steps involved in cold rolling pose challenges to devising a rational scheduling plan.Therefore,considering the practical production constraints,this paper investigates a cold rolling scheduling problem for processing jobs with specific due dates and batch attributions on parallel heterogeneous machines with continuous production requirements.Firstly,the scheduling problem is formulated as a mixed integer linear program(MILP)model with an economic objective.Then,a modified genetic algorithm(GA)is proposed to search for the optimal solution to the MILP problem.Specifically,this method includes a heuristic initialization mechanism to generate feasible initial solutions,three heuristic mutation operators to generate promising candidate solutions,and a parallel computing mechanism to accelerate the evaluation process of the GA.The simulation results demonstrate that the proposed method can be effectively implemented to generate optimized scheduling schemes in the cold rolling process.展开更多
Airports around the world commonly face challenges in managing airport slot allocation.Effective management of limited slot resources by civil aviation authority often requires redistributing requested slots among air...Airports around the world commonly face challenges in managing airport slot allocation.Effective management of limited slot resources by civil aviation authority often requires redistributing requested slots among airlines.The allocation process must operate within the prescribed capacity limits of the airport while adhering to established priorities and regulations.Additionally,ensuring market fairness is a key objective,as the value of airport slots plays a significant role in the adjustment process.This transforms the traditional time-shift-based problem into a complex multi-objective optimization problem.Addressing such complications is of significant importance to airlines,airports,and passengers alike.Due to the complexity of fairness metrics,traditional integer programming models encounter difficulties in finding effective solutions.This study proposes a neighborhood search strategy to tackle the single airport slot allocation,making it adaptable to both static and rolling capacity scenarios.Two Genetic Algorithms(GAs)are introduced,corresponding to time adjustment and sequence adjustment strategies,respectively.The GA based on the time adjustment strategy demonstrates high robustness,while the sequence adjustment strategy builds upon this GA to develop a simple heuristic algorithm that offers rapid convergence.Case studies conducted at seven airports in China confirm that all three algorithms yield high-quality adjustment solutions suitable for the majority of applications.Further,Pareto analysis reveals that these algorithms effectively balance the adjustment shifts and fairness metrics,demonstrating high practical value and broad applicability.展开更多
With the continuous improvement of the accuracy of geodetic deformation data,the inversion of seismic source parameters puts forward a higher demand for nonlinear inversion algorithms.In this research,an improved Spar...With the continuous improvement of the accuracy of geodetic deformation data,the inversion of seismic source parameters puts forward a higher demand for nonlinear inversion algorithms.In this research,an improved Sparrow Search Algorithm(SSA)is proposed for the seismic source parameter inversion problem.By replacing the original population generation in the improved algorithm with Latin hypercubic sampling,the Sparrow Search Algorithm reduces the repetition of samples in the population initialization.Subsequently,the algorithm introduces adaptive weights in the discoverer generation phase of the sparrow algorithm and combines the Levy flight strategy to make the algorithm more comprehensive and improve the search accuracy during the whole iteration process.Therefore,the improved Latin hypercube-based sparrow search algorithm(ILHSSA)has better advantages in terms of iterative convergence speed and stability.In order to verify the performance of ILHSSA,the basic genetic algorithm(GA)and sparrow search algorithm(SSA)are examined and compared with ILHSSA by simulated earthquakes of two different earthquake types.The simulation experiments show that the improved algorithm ILHSSA outperforms SSA in accuracy and stability.Compared with the GA algorithm,ILHSSA can achieve the same inversion accuracy as GA,and it even surpasses GA in inversion speed and the inversion results of some parameters,demonstrating better stability.Finally,the improved algorithm is used for the 2017 Bodrum-Cos earthquake and the 2016 Amatrice earthquake in Italy.The inversion results all reflect the practicality and reliability of the improved algorithm.展开更多
To address the challenge of identifying the primary causes of energy consumption fluctuations and accurately assessing the influence of various factors in the converter unit of an iron and steel plant,the focus is pla...To address the challenge of identifying the primary causes of energy consumption fluctuations and accurately assessing the influence of various factors in the converter unit of an iron and steel plant,the focus is placed on the critical components of material and heat balance.Through a thorough analysis of the interactions between various components and energy consumptions,six pivotal factors have been identified—raw material composition,steel type,steel temperature,slag temperature,recycling practices,and operational parameters.Utilizing a framework based on an equivalent energy consumption model,an integrated intelligent diagnostic model has been developed that encapsulates these factors,providing a comprehensive assessment tool for converter energy consumption.Employing the K-means clustering algorithm,historical operational data from the converter have been meticulously analyzed to determine baseline values for essential variables such as energy consumption and recovery rates.Building upon this data-driven foundation,an innovative online system for the intelligent diagnosis of converter energy consumption has been crafted and implemented,enhancing the precision and efficiency of energy management.Upon implementation with energy consumption data at a steel plant in 2023,the diagnostic analysis performed by the system exposed significant variations in energy usage across different converter units.The analysis revealed that the most significant factor influencing the variation in energy consumption for both furnaces was the steel grade,with contributions of−0.550 and 0.379.展开更多
Face recognition has emerged as one of the most prominent applications of image analysis and under-standing,gaining considerable attention in recent years.This growing interest is driven by two key factors:its extensi...Face recognition has emerged as one of the most prominent applications of image analysis and under-standing,gaining considerable attention in recent years.This growing interest is driven by two key factors:its extensive applications in law enforcement and the commercial domain,and the rapid advancement of practical technologies.Despite the significant advancements,modern recognition algorithms still struggle in real-world conditions such as varying lighting conditions,occlusion,and diverse facial postures.In such scenarios,human perception is still well above the capabilities of present technology.Using the systematic mapping study,this paper presents an in-depth review of face detection algorithms and face recognition algorithms,presenting a detailed survey of advancements made between 2015 and 2024.We analyze key methodologies,highlighting their strengths and restrictions in the application context.Additionally,we examine various datasets used for face detection/recognition datasets focusing on the task-specific applications,size,diversity,and complexity.By analyzing these algorithms and datasets,this survey works as a valuable resource for researchers,identifying the research gap in the field of face detection and recognition and outlining potential directions for future research.展开更多
Myocardial infarction(MI)is one of the leading causes of death globally among cardiovascular diseases,necessitating modern and accurate diagnostics for cardiac patient conditions.Among the available functional diagnos...Myocardial infarction(MI)is one of the leading causes of death globally among cardiovascular diseases,necessitating modern and accurate diagnostics for cardiac patient conditions.Among the available functional diagnostic methods,electrocardiography(ECG)is particularly well-known for its ability to detect MI.However,confirming its accuracy—particularly in identifying the localization of myocardial damage—often presents challenges in practice.This study,therefore,proposes a new approach based on machine learning models for the analysis of 12-lead ECG data to accurately identify the localization of MI.In particular,the learning vector quantization(LVQ)algorithm was applied,considering the contribution of each ECG lead in the 12-channel system,which obtained an accuracy of 87%in localizing damaged myocardium.The developed model was tested on verified data from the PTB database,including 445 ECG recordings from both healthy individuals and MI-diagnosed patients.The results demonstrated that the 12-lead ECG system allows for a comprehensive understanding of cardiac activities in myocardial infarction patients,serving as an essential tool for the diagnosis of myocardial conditions and localizing their damage.A comprehensive comparison was performed,including CNN,SVM,and Logistic Regression,to evaluate the proposed LVQ model.The results demonstrate that the LVQ model achieves competitive performance in diagnostic tasks while maintaining computational efficiency,making it suitable for resource-constrained environments.This study also applies a carefully designed data pre-processing flow,including class balancing and noise removal,which improves the reliability and reproducibility of the results.These aspects highlight the potential application of the LVQ model in cardiac diagnostics,opening up prospects for its use along with more complex neural network architectures.展开更多
Wind energy has emerged as a potential replacement for fossil fuel-based energy sources.To harness maximum wind energy,a crucial decision in the development of an efficient wind farm is the optimal layout design.This ...Wind energy has emerged as a potential replacement for fossil fuel-based energy sources.To harness maximum wind energy,a crucial decision in the development of an efficient wind farm is the optimal layout design.This layout defines the specific locations of the turbines within the wind farm.The process of finding the optimal locations of turbines,in the presence of various technical and technological constraints,makes the wind farm layout design problem a complex optimization problem.This problem has traditionally been solved with nature-inspired algorithms with promising results.The performance and convergence of nature-inspired algorithms depend on several parameters,among which the algorithm termination criterion plays a crucial role.Timely convergence is an important aspect of efficient algorithm design because an inefficient algorithm results in wasted computational resources,unwarranted electricity consumption,and hardware stress.This study provides an in-depth analysis of several termination criteria while using the genetic algorithm as a test bench,with its application to the wind farm layout design problem while considering various wind scenarios.The performance of six termination criteria is empirically evaluated with respect to the quality of solutions produced and the execution time involved.Due to the conflicting nature of these two attributes,fuzzy logic-based multi-attribute decision-making is employed in the decision process.Results for the fuzzy decision approach indicate that among the various criteria tested,the criterion Phi achieves an improvement in the range of 2.44%to 32.93%for wind scenario 1.For scenario 2,Best-worst termination criterion performed well compared to the other criteria evaluated,with an improvement in the range of 1.2%to 9.64%.For scenario 3,Hitting bound was the best performer with an improvement of 1.16%to 20.93%.展开更多
Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing ...Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing is considered,and an adaptive cooperated shuffled frog-leaping algorithm(ACSFLA)is proposed to minimize makespan and total tardiness simultaneously.ACSFLA determines the search times for each memeplex based on its quality,with more searches in high-quality memeplexes.An adaptive cooperated and diversified search mechanism is applied,dynamically adjusting search strategies for each memeplex based on their dominance relationships and quality.During the cooperated search,ACSFLA uses a segmented and dynamic targeted search approach,while in non-cooperated scenarios,the search focuses on local search around superior solutions to improve efficiency.Furthermore,ACSFLA employs adaptive population division and partial population shuffling strategies.Through these strategies,memeplexes with low evolutionary potential are selected for reconstruction in the next generation,while thosewithhighevolutionarypotential are retained to continue their evolution.Toevaluate the performance of ACSFLA,comparative experiments were conducted using ACSFLA,SFLA,ASFLA,MOABC,and NSGA-CC in 90 instances.The computational results reveal that ACSFLA outperforms the other algorithms in 78 of the 90 test cases,highlighting its advantages in solving the parallel BPM scheduling problem with machine eligibility.展开更多
The computational accuracy and efficiency of modeling the stress spectrum derived from bridge monitoring data significantly influence the fatigue life assessment of steel bridges.Therefore,determining the optimal stre...The computational accuracy and efficiency of modeling the stress spectrum derived from bridge monitoring data significantly influence the fatigue life assessment of steel bridges.Therefore,determining the optimal stress spectrum model is crucial for further fatigue reliability analysis.This study investigates the performance of the REBMIX algorithm in modeling both univariate(stress range)and multivariate(stress range and mean stress)distributions of the rain-flowmatrix for a steel arch bridge,usingAkaike’s Information Criterion(AIC)as a performance metric.Four types of finitemixture distributions—Normal,Lognormal,Weibull,and Gamma—are employed tomodel the stress range.Additionally,mixed distributions,including Normal-Normal,Lognormal-Normal,Weibull-Normal,and Gamma-Normal,are utilized to model the joint distribution of stress range and mean stress.The REBMIX algorithm estimates the number of components,component weights,and component parameters for each candidate finite mixture distribution.The results demonstrate that the REBMIX algorithm-based mixture parameter estimation approach effectively identifies the optimal distribution based on AIC values.Furthermore,the algorithm exhibits superior computational efficiency compared to traditional methods,making it highly suitable for practical applications.展开更多
文摘To improve the efficiency and accuracy of path planning for fan inspection tasks in thermal power plants,this paper proposes an intelligent inspection robot path planning scheme based on an improved A^(*)algorithm.The inspection robot utilizes multiple sensors to monitor key parameters of the fans,such as vibration,noise,and bearing temperature,and upload the data to the monitoring center.The robot’s inspection path employs the improved A^(*)algorithm,incorporating obstacle penalty terms,path reconstruction,and smoothing optimization techniques,thereby achieving optimal path planning for the inspection robot in complex environments.Simulation results demonstrate that the improved A^(*)algorithm significantly outperforms the traditional A^(*)algorithm in terms of total path distance,smoothness,and detour rate,effectively improving the execution efficiency of inspection tasks.
文摘Smallholder farming in West Africa faces various challenges, such as limited access to seeds, fertilizers, modern mechanization, and agricultural climate services. Crop productivity obtained under these conditions varies significantly from one farmer to another, making it challenging to accurately estimate crop production through crop models. This limitation has implications for the reliability of using crop models as agricultural decision-making support tools. To support decision making in agriculture, an approach combining a genetic algorithm (GA) with the crop model AquaCrop is proposed for a location-specific calibration of maize cropping. In this approach, AquaCrop is used to simulate maize crop yield while the GA is used to derive optimal parameters set at grid cell resolution from various combinations of cultivar parameters and crop management in the process of crop and management options calibration. Statistics on pairwise simulated and observed yields indicate that the coefficient of determination varies from 0.20 to 0.65, with a yield deviation ranging from 8% to 36% across Burkina Faso (BF). An analysis of the optimal parameter sets shows that regardless of the climatic zone, a base temperature of 10˚C and an upper temperature of 32˚C is observed in at least 50% of grid cells. The growing season length and the harvest index vary significantly across BF, with the highest values found in the Soudanian zone and the lowest values in the Sahelian zone. Regarding management strategies, the fertility mean rate is approximately 35%, 39%, and 49% for the Sahelian, Soudano-sahelian, and Soudanian zones, respectively. The mean weed cover is around 36%, with the Sahelian and Soudano-sahelian zones showing the highest variability. The proposed approach can be an alternative to the conventional one-size-fits-all approach commonly used for regional crop modeling. Moreover, it has the potential to explore the performance of cropping strategies to adapt to changing climate conditions.
基金supported by the National Natural Science Foundation of China[Grant No.12461035]Qinghai University Students Innovative Training Program Project[2024-QX-57].
文摘Wind farm layout optimization is a critical challenge in renewable energy development,especially in regions with complex terrain.Micro-siting of wind turbines has a significant impact on the overall efficiency and economic viability of wind farm,where the wake effect,wind speed,types of wind turbines,etc.,have an impact on the output power of the wind farm.To solve the optimization problem of wind farm layout under complex terrain conditions,this paper proposes wind turbine layout optimization using different types of wind turbines,the aim is to reduce the influence of the wake effect and maximize economic benefits.The linear wake model is used for wake flow calculation over complex terrain.Minimizing the unit energy cost is taken as the objective function,considering that the objective function is affected by cost and output power,which influence each other.The cost function includes construction cost,installation cost,maintenance cost,etc.Therefore,a bi-level constrained optimization model is established,in which the upper-level objective function is to minimize the unit energy cost,and the lower-level objective function is to maximize the output power.Then,a hybrid evolutionary algorithm is designed according to the characteristics of the decision variables.The improved genetic algorithm and differential evolution are used to optimize the upper-level and lower-level objective functions,respectively,these evolutionary operations search for the optimal solution as much as possible.Finally,taking the roughness of different terrain,wind farms of different scales and different types of wind turbines as research scenarios,the optimal deployment is solved by using the algorithm in this paper,and four algorithms are compared to verify the effectiveness of the proposed algorithm.
基金supported by the P.G.Senapathy Center for Computing Resources at IIT Madrasfunding provided by the Ministry of Education,Government of Indiasupported by the National Natural Science Foundation of China(Grant Nos.12388101,12472224 and 92252104).
文摘This paper presents an Eulerian-Lagrangian algorithm for direct numerical simulation(DNS)of particle-laden flows.The algorithm is applicable to perform simulations of dilute suspensions of small inertial particles in turbulent carrier flow.The Eulerian framework numerically resolves turbulent carrier flow using a parallelized,finite-volume DNS solver on a staggered Cartesian grid.Particles are tracked using a point-particle method utilizing a Lagrangian particle tracking(LPT)algorithm.The proposed Eulerian-Lagrangian algorithm is validated using an inertial particle-laden turbulent channel flow for different Stokes number cases.The particle concentration profiles and higher-order statistics of the carrier and dispersed phases agree well with the benchmark results.We investigated the effect of fluid velocity interpolation and numerical integration schemes of particle tracking algorithms on particle dispersion statistics.The suitability of fluid velocity interpolation schemes for predicting the particle dispersion statistics is discussed in the framework of the particle tracking algorithm coupled to the finite-volume solver.In addition,we present parallelization strategies implemented in the algorithm and evaluate their parallel performance.
基金support from the Biotechnology and Biological Council Doctoral Training Programme(BBSRC DTP)the support from the Royal Society and Wolfson Foundation(RSWF\FT\191022).
文摘Nonlinear wavefront shaping is crucial for advancing optical technologies,enabling applications in optical computation,information processing,and imaging.However,a significant challenge is that once a metasurface is fabricated,the nonlinear wavefront it generates is fixed,offering little flexibility.This limitation often necessitates the fabrication of different metasurfaces for different wavefronts,which is both time-consuming and inefficient.To address this,we combine evolutionary algorithms with spatial light modulators(SLMs)to dynamically control wavefronts using a single metasurface,reducing the need for multiple fabrications and enabling the generation of arbitrary nonlinear wavefront patterns without requiring complicated optical alignment.We demonstrate this approach by introducing a genetic algorithm(GA)to manipulate visible wavefronts converted from near-infrared light via third-harmonic generation(THG)in a silicon metasurface.The Si metasurface supports multipolar Mie resonances that strongly enhance light-matter interactions,thereby significantly boosting THG emission at resonant positions.Additionally,the cubic relationship between THG emission and the infrared input reduces noise in the diffractive patterns produced by the SLM.This allows for precise experimental engineering of the nonlinear emission patterns with fewer alignment constraints.Our approach paves the way for self-optimized nonlinear wavefront shaping,advancing optical computation and information processing techniques.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金Project supported by the National Natural Science Foundation of China(Grant No.12404531)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province,China(Grant No.23KJB140011)。
文摘Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing.However,elastic coding lenses(ECLs)still suffer from low focusing performance,thickness comparable to wavelength,and frequency sensitivity.Here,we consider both the structural and material properties of the coding unit,thus realizing further compression of the thickness of the ECL.We chose the simplest ECL,which consists of only two encoding units.The coding unit 0 is a straight structure constructed using a carbon fiber reinforced composite material,and the coding unit 1 is a zigzag structure constructed using an aluminum material,and the thickness of the ECL constructed using them is only 1/8 of the wavelength.Based on the theoretical design,the arrangement of coding units is further optimized using genetic algorithms,which significantly improves the focusing performance of the lens at different focus and frequencies.This study provides a more effective way to control vibration and noise in advanced structures.
基金supported by the National Natural Science Foundation of China(Grant Number 61573264).
文摘As a complicated optimization problem,parallel batch processing machines scheduling problem(PBPMSP)exists in many real-life manufacturing industries such as textiles and semiconductors.Machine eligibility means that at least one machine is not eligible for at least one job.PBPMSP and scheduling problems with machine eligibility are frequently considered;however,PBPMSP with machine eligibility is seldom explored.This study investigates PBPMSP with machine eligibility in fabric dyeing and presents a novel shuffled frog-leaping algorithm with competition(CSFLA)to minimize makespan.In CSFLA,the initial population is produced in a heuristic and random way,and the competitive search of memeplexes comprises two phases.Competition between any two memeplexes is done in the first phase,then iteration times are adjusted based on competition,and search strategies are adjusted adaptively based on the evolution quality of memeplexes in the second phase.An adaptive population shuffling is given.Computational experiments are conducted on 100 instances.The computational results showed that the new strategies of CSFLA are effective and that CSFLA has promising advantages in solving the considered PBPMSP.
基金Supported by National Natural Science Foundation of China(Grant No.62273362)National Key Research and Development Program of China(Grant No.2024YFB3312100)。
文摘A well-designed production schedule for cold rolling can enhance steel enterprises'operational efficiency and profitability.Nevertheless,the intricate constraints and numerous steps involved in cold rolling pose challenges to devising a rational scheduling plan.Therefore,considering the practical production constraints,this paper investigates a cold rolling scheduling problem for processing jobs with specific due dates and batch attributions on parallel heterogeneous machines with continuous production requirements.Firstly,the scheduling problem is formulated as a mixed integer linear program(MILP)model with an economic objective.Then,a modified genetic algorithm(GA)is proposed to search for the optimal solution to the MILP problem.Specifically,this method includes a heuristic initialization mechanism to generate feasible initial solutions,three heuristic mutation operators to generate promising candidate solutions,and a parallel computing mechanism to accelerate the evaluation process of the GA.The simulation results demonstrate that the proposed method can be effectively implemented to generate optimized scheduling schemes in the cold rolling process.
基金supported in part by the National Natural Science Foundation of China(Nos.62167003,52302421)in part by the Diversified Investment Fund of Tianjin,China(No.23JCQNJC00210)。
文摘Airports around the world commonly face challenges in managing airport slot allocation.Effective management of limited slot resources by civil aviation authority often requires redistributing requested slots among airlines.The allocation process must operate within the prescribed capacity limits of the airport while adhering to established priorities and regulations.Additionally,ensuring market fairness is a key objective,as the value of airport slots plays a significant role in the adjustment process.This transforms the traditional time-shift-based problem into a complex multi-objective optimization problem.Addressing such complications is of significant importance to airlines,airports,and passengers alike.Due to the complexity of fairness metrics,traditional integer programming models encounter difficulties in finding effective solutions.This study proposes a neighborhood search strategy to tackle the single airport slot allocation,making it adaptable to both static and rolling capacity scenarios.Two Genetic Algorithms(GAs)are introduced,corresponding to time adjustment and sequence adjustment strategies,respectively.The GA based on the time adjustment strategy demonstrates high robustness,while the sequence adjustment strategy builds upon this GA to develop a simple heuristic algorithm that offers rapid convergence.Case studies conducted at seven airports in China confirm that all three algorithms yield high-quality adjustment solutions suitable for the majority of applications.Further,Pareto analysis reveals that these algorithms effectively balance the adjustment shifts and fairness metrics,demonstrating high practical value and broad applicability.
基金funded by the National Natural Science Foundation of China(42174011).
文摘With the continuous improvement of the accuracy of geodetic deformation data,the inversion of seismic source parameters puts forward a higher demand for nonlinear inversion algorithms.In this research,an improved Sparrow Search Algorithm(SSA)is proposed for the seismic source parameter inversion problem.By replacing the original population generation in the improved algorithm with Latin hypercubic sampling,the Sparrow Search Algorithm reduces the repetition of samples in the population initialization.Subsequently,the algorithm introduces adaptive weights in the discoverer generation phase of the sparrow algorithm and combines the Levy flight strategy to make the algorithm more comprehensive and improve the search accuracy during the whole iteration process.Therefore,the improved Latin hypercube-based sparrow search algorithm(ILHSSA)has better advantages in terms of iterative convergence speed and stability.In order to verify the performance of ILHSSA,the basic genetic algorithm(GA)and sparrow search algorithm(SSA)are examined and compared with ILHSSA by simulated earthquakes of two different earthquake types.The simulation experiments show that the improved algorithm ILHSSA outperforms SSA in accuracy and stability.Compared with the GA algorithm,ILHSSA can achieve the same inversion accuracy as GA,and it even surpasses GA in inversion speed and the inversion results of some parameters,demonstrating better stability.Finally,the improved algorithm is used for the 2017 Bodrum-Cos earthquake and the 2016 Amatrice earthquake in Italy.The inversion results all reflect the practicality and reliability of the improved algorithm.
基金financial support from the National Key R&D Program of China(Grant No.2020YFB1711100).
文摘To address the challenge of identifying the primary causes of energy consumption fluctuations and accurately assessing the influence of various factors in the converter unit of an iron and steel plant,the focus is placed on the critical components of material and heat balance.Through a thorough analysis of the interactions between various components and energy consumptions,six pivotal factors have been identified—raw material composition,steel type,steel temperature,slag temperature,recycling practices,and operational parameters.Utilizing a framework based on an equivalent energy consumption model,an integrated intelligent diagnostic model has been developed that encapsulates these factors,providing a comprehensive assessment tool for converter energy consumption.Employing the K-means clustering algorithm,historical operational data from the converter have been meticulously analyzed to determine baseline values for essential variables such as energy consumption and recovery rates.Building upon this data-driven foundation,an innovative online system for the intelligent diagnosis of converter energy consumption has been crafted and implemented,enhancing the precision and efficiency of energy management.Upon implementation with energy consumption data at a steel plant in 2023,the diagnostic analysis performed by the system exposed significant variations in energy usage across different converter units.The analysis revealed that the most significant factor influencing the variation in energy consumption for both furnaces was the steel grade,with contributions of−0.550 and 0.379.
文摘Face recognition has emerged as one of the most prominent applications of image analysis and under-standing,gaining considerable attention in recent years.This growing interest is driven by two key factors:its extensive applications in law enforcement and the commercial domain,and the rapid advancement of practical technologies.Despite the significant advancements,modern recognition algorithms still struggle in real-world conditions such as varying lighting conditions,occlusion,and diverse facial postures.In such scenarios,human perception is still well above the capabilities of present technology.Using the systematic mapping study,this paper presents an in-depth review of face detection algorithms and face recognition algorithms,presenting a detailed survey of advancements made between 2015 and 2024.We analyze key methodologies,highlighting their strengths and restrictions in the application context.Additionally,we examine various datasets used for face detection/recognition datasets focusing on the task-specific applications,size,diversity,and complexity.By analyzing these algorithms and datasets,this survey works as a valuable resource for researchers,identifying the research gap in the field of face detection and recognition and outlining potential directions for future research.
基金funded by the Ministry of Science and Higher Education of the Republic of Kazakhstan,grant numbers AP14969403 and AP23485820.
文摘Myocardial infarction(MI)is one of the leading causes of death globally among cardiovascular diseases,necessitating modern and accurate diagnostics for cardiac patient conditions.Among the available functional diagnostic methods,electrocardiography(ECG)is particularly well-known for its ability to detect MI.However,confirming its accuracy—particularly in identifying the localization of myocardial damage—often presents challenges in practice.This study,therefore,proposes a new approach based on machine learning models for the analysis of 12-lead ECG data to accurately identify the localization of MI.In particular,the learning vector quantization(LVQ)algorithm was applied,considering the contribution of each ECG lead in the 12-channel system,which obtained an accuracy of 87%in localizing damaged myocardium.The developed model was tested on verified data from the PTB database,including 445 ECG recordings from both healthy individuals and MI-diagnosed patients.The results demonstrated that the 12-lead ECG system allows for a comprehensive understanding of cardiac activities in myocardial infarction patients,serving as an essential tool for the diagnosis of myocardial conditions and localizing their damage.A comprehensive comparison was performed,including CNN,SVM,and Logistic Regression,to evaluate the proposed LVQ model.The results demonstrate that the LVQ model achieves competitive performance in diagnostic tasks while maintaining computational efficiency,making it suitable for resource-constrained environments.This study also applies a carefully designed data pre-processing flow,including class balancing and noise removal,which improves the reliability and reproducibility of the results.These aspects highlight the potential application of the LVQ model in cardiac diagnostics,opening up prospects for its use along with more complex neural network architectures.
基金funded by King Fahd University of Petroleum&Minerals,Saudi Arabia under IRC-SES grant#INRE 2217.
文摘Wind energy has emerged as a potential replacement for fossil fuel-based energy sources.To harness maximum wind energy,a crucial decision in the development of an efficient wind farm is the optimal layout design.This layout defines the specific locations of the turbines within the wind farm.The process of finding the optimal locations of turbines,in the presence of various technical and technological constraints,makes the wind farm layout design problem a complex optimization problem.This problem has traditionally been solved with nature-inspired algorithms with promising results.The performance and convergence of nature-inspired algorithms depend on several parameters,among which the algorithm termination criterion plays a crucial role.Timely convergence is an important aspect of efficient algorithm design because an inefficient algorithm results in wasted computational resources,unwarranted electricity consumption,and hardware stress.This study provides an in-depth analysis of several termination criteria while using the genetic algorithm as a test bench,with its application to the wind farm layout design problem while considering various wind scenarios.The performance of six termination criteria is empirically evaluated with respect to the quality of solutions produced and the execution time involved.Due to the conflicting nature of these two attributes,fuzzy logic-based multi-attribute decision-making is employed in the decision process.Results for the fuzzy decision approach indicate that among the various criteria tested,the criterion Phi achieves an improvement in the range of 2.44%to 32.93%for wind scenario 1.For scenario 2,Best-worst termination criterion performed well compared to the other criteria evaluated,with an improvement in the range of 1.2%to 9.64%.For scenario 3,Hitting bound was the best performer with an improvement of 1.16%to 20.93%.
文摘Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing is considered,and an adaptive cooperated shuffled frog-leaping algorithm(ACSFLA)is proposed to minimize makespan and total tardiness simultaneously.ACSFLA determines the search times for each memeplex based on its quality,with more searches in high-quality memeplexes.An adaptive cooperated and diversified search mechanism is applied,dynamically adjusting search strategies for each memeplex based on their dominance relationships and quality.During the cooperated search,ACSFLA uses a segmented and dynamic targeted search approach,while in non-cooperated scenarios,the search focuses on local search around superior solutions to improve efficiency.Furthermore,ACSFLA employs adaptive population division and partial population shuffling strategies.Through these strategies,memeplexes with low evolutionary potential are selected for reconstruction in the next generation,while thosewithhighevolutionarypotential are retained to continue their evolution.Toevaluate the performance of ACSFLA,comparative experiments were conducted using ACSFLA,SFLA,ASFLA,MOABC,and NSGA-CC in 90 instances.The computational results reveal that ACSFLA outperforms the other algorithms in 78 of the 90 test cases,highlighting its advantages in solving the parallel BPM scheduling problem with machine eligibility.
基金jointly supported by the Fundamental Research Funds for the Central Universities(Grant No.xzy012023075)the Zhejiang Engineering Research Center of Intelligent Urban Infrastructure(Grant No.IUI2023-YB-12).
文摘The computational accuracy and efficiency of modeling the stress spectrum derived from bridge monitoring data significantly influence the fatigue life assessment of steel bridges.Therefore,determining the optimal stress spectrum model is crucial for further fatigue reliability analysis.This study investigates the performance of the REBMIX algorithm in modeling both univariate(stress range)and multivariate(stress range and mean stress)distributions of the rain-flowmatrix for a steel arch bridge,usingAkaike’s Information Criterion(AIC)as a performance metric.Four types of finitemixture distributions—Normal,Lognormal,Weibull,and Gamma—are employed tomodel the stress range.Additionally,mixed distributions,including Normal-Normal,Lognormal-Normal,Weibull-Normal,and Gamma-Normal,are utilized to model the joint distribution of stress range and mean stress.The REBMIX algorithm estimates the number of components,component weights,and component parameters for each candidate finite mixture distribution.The results demonstrate that the REBMIX algorithm-based mixture parameter estimation approach effectively identifies the optimal distribution based on AIC values.Furthermore,the algorithm exhibits superior computational efficiency compared to traditional methods,making it highly suitable for practical applications.
