To explore mix proportion design of RAC with aggregates tightly packed,the dry and wet packing density of recycled coarse aggregates mixture system and recycled coarse and fine aggregates were tested,then the influenc...To explore mix proportion design of RAC with aggregates tightly packed,the dry and wet packing density of recycled coarse aggregates mixture system and recycled coarse and fine aggregates were tested,then the influence of replacement rate and particle size ratio on the packing density of particle system was explored,the packing density prediction model of recycled coarse aggregates based on particle morphology was constructed,and the mix proportion optimization for recycled aggregate concrete with dry-wet packing model was carried out.The experimental results show that,with the increasing of recycled aggregate replacement rate or fine-grained volume ratio,the dry packing density of recycled coarse aggregates decreases gradually.With the increasing of replacement rate,the particle gradation can be optimized by increasing coarsegrained volume ratio.There is a significant effect for particle morphology parameter K and the particle size ratio on the packing density of the binary mixed system,and the packing density prediction model of recycled coarse aggregates based on particle morphology was constructed.The maximum increase in compressive strength and tensile strength of RAC with mix proportion optimized by the dry-wet packing model are 12.94%and 11.09%,and the cementitious materials is reduced by 21.83%,then the superiority of the mix proportion optimization of RAC with the dry-wet close packing model is confirmed.The results of this paper can provide a theoretical basis for the mix proportion design of RAC.展开更多
In the study on Ca-Mg silicate crystalline glazes, we found some disequilibrated crystallization phenomena, such as non-crystallographic small angle forking and spheroidal growth, parasitism and wedging-form of crysta...In the study on Ca-Mg silicate crystalline glazes, we found some disequilibrated crystallization phenomena, such as non-crystallographic small angle forking and spheroidal growth, parasitism and wedging-form of crystals, dendritic growth, secondary nucleation, etc. Those phenomena possibly resulted from two factors: (1) partial temperature gradient, which is caused by heat asymmetry in the electrical resistance furnace, when crystals crystalize from silicate melt; (2) constitutional supercooling near the surface of crystals. The disparity of disequilibrated crystallization phenomena in different main crystalline phases causes various morphological features of the crystal aggregates. At the same time, disequilibrated crystallization causes great stress retained in the crystals, which results in cracks in glazes when the temperature drops. According to the results, the authors analyzed those phenomena and displayed correlative figures and data.展开更多
A widely-used naphthalenediimide （NDI） based electron acceptor P（NDI2OD-T2） with different number- average molecular weight （Mn） of 38 （N2200L）, 56 （N2200M）, 102 （N2200H） kDa were successfully prepared. Th...A widely-used naphthalenediimide （NDI） based electron acceptor P（NDI2OD-T2） with different number- average molecular weight （Mn） of 38 （N2200L）, 56 （N2200M）, 102 （N2200H） kDa were successfully prepared. The effect of molecular-weight on the performance of all-polymer solar cells based on Poly（5-（5-（4,8- bis（ 5-decylthiophen-2-yl ）-6-methylbenzo[1,2-b： 4,5-b＇]dithophen-2-yl ）thiophen-2-yl ）-6,7-difluoro-8- （5-methylthiophen-2-yl）-2,S-bis（3-（octyloxy）phenyl）quinoxaline） （P2F-DE）：N2200 was systematically investigated. The results reveal that N2200 with increased M. show enhanced intermolecular interac- tions, resulting in improved light absorption and electron mobility. However, the strong aggregation trend of N2200H can cause unfavorable morphology for exciton dissociation and carrier transport. The blend film using N2200 with moderate M. actually develops more ideal phase segregation for efficient charge separation and transport, leading to balanced electron/hole mobility and less carrier recombi- nation. Consequently, all-polymer solar cells employing P2F-DE as the electron donor and N2200M as the electron acceptor show the highest efficiency of 4.81%, outperforming those using N2200L （3,07~;） and N2200H （S,92%）. Thus, the Mn of the polymer acceptor plays an important role in all-polymer solar ceils, which allows it to be an effective parameter for the adjustment of the device morphology and efficiency.展开更多
基金Funded by joint Funds of the National Natural Science Foundation of China(No.U1904188)the Key Research Project of Henan Province for Colleges and Universities(No.26A560009)+3 种基金the Jiaozuo City Science and Technology Planning Project(No.2025210099)the Henan Provincial Science and Technology Research Project(No.252102320305)the Natural Science Foundation of Henan Province(No.252300421917)the Project by Key Laboratory of Intelligent Construction and Safety Operation and Maintenance of Underground Engineering in Henan Province(No.KFKT2024-01)。
文摘To explore mix proportion design of RAC with aggregates tightly packed,the dry and wet packing density of recycled coarse aggregates mixture system and recycled coarse and fine aggregates were tested,then the influence of replacement rate and particle size ratio on the packing density of particle system was explored,the packing density prediction model of recycled coarse aggregates based on particle morphology was constructed,and the mix proportion optimization for recycled aggregate concrete with dry-wet packing model was carried out.The experimental results show that,with the increasing of recycled aggregate replacement rate or fine-grained volume ratio,the dry packing density of recycled coarse aggregates decreases gradually.With the increasing of replacement rate,the particle gradation can be optimized by increasing coarsegrained volume ratio.There is a significant effect for particle morphology parameter K and the particle size ratio on the packing density of the binary mixed system,and the packing density prediction model of recycled coarse aggregates based on particle morphology was constructed.The maximum increase in compressive strength and tensile strength of RAC with mix proportion optimized by the dry-wet packing model are 12.94%and 11.09%,and the cementitious materials is reduced by 21.83%,then the superiority of the mix proportion optimization of RAC with the dry-wet close packing model is confirmed.The results of this paper can provide a theoretical basis for the mix proportion design of RAC.
基金Supported by the Natural Science Foundation of Fujian Province(No.D0 2 10 0 12 )
文摘In the study on Ca-Mg silicate crystalline glazes, we found some disequilibrated crystallization phenomena, such as non-crystallographic small angle forking and spheroidal growth, parasitism and wedging-form of crystals, dendritic growth, secondary nucleation, etc. Those phenomena possibly resulted from two factors: (1) partial temperature gradient, which is caused by heat asymmetry in the electrical resistance furnace, when crystals crystalize from silicate melt; (2) constitutional supercooling near the surface of crystals. The disparity of disequilibrated crystallization phenomena in different main crystalline phases causes various morphological features of the crystal aggregates. At the same time, disequilibrated crystallization causes great stress retained in the crystals, which results in cracks in glazes when the temperature drops. According to the results, the authors analyzed those phenomena and displayed correlative figures and data.
基金was supported by the National Natural Science Foundation of China(Grant Nos.61176054 and 61222401)the Natural Science Foundation of Jiangsu Province(No.BK20130311)+1 种基金the Postdoctoral Science Foundation(Grant Nos.2014M550302 and 1302015A)the Collaborative Innovation Center of Suzhou Nano Science and Technology,the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘A widely-used naphthalenediimide （NDI） based electron acceptor P（NDI2OD-T2） with different number- average molecular weight （Mn） of 38 （N2200L）, 56 （N2200M）, 102 （N2200H） kDa were successfully prepared. The effect of molecular-weight on the performance of all-polymer solar cells based on Poly（5-（5-（4,8- bis（ 5-decylthiophen-2-yl ）-6-methylbenzo[1,2-b： 4,5-b＇]dithophen-2-yl ）thiophen-2-yl ）-6,7-difluoro-8- （5-methylthiophen-2-yl）-2,S-bis（3-（octyloxy）phenyl）quinoxaline） （P2F-DE）：N2200 was systematically investigated. The results reveal that N2200 with increased M. show enhanced intermolecular interac- tions, resulting in improved light absorption and electron mobility. However, the strong aggregation trend of N2200H can cause unfavorable morphology for exciton dissociation and carrier transport. The blend film using N2200 with moderate M. actually develops more ideal phase segregation for efficient charge separation and transport, leading to balanced electron/hole mobility and less carrier recombi- nation. Consequently, all-polymer solar cells employing P2F-DE as the electron donor and N2200M as the electron acceptor show the highest efficiency of 4.81%, outperforming those using N2200L （3,07~;） and N2200H （S,92%）. Thus, the Mn of the polymer acceptor plays an important role in all-polymer solar ceils, which allows it to be an effective parameter for the adjustment of the device morphology and efficiency.
