Hospital wastewater contains complex pollutants,including residual organic dyes and antibiotic-resistant pathogens,posing severe risks to ecosystems and human health.Conventional adsorbents,constrained by monopolar fu...Hospital wastewater contains complex pollutants,including residual organic dyes and antibiotic-resistant pathogens,posing severe risks to ecosystems and human health.Conventional adsorbents,constrained by monopolar functional groups and limited surface sites,fail to remove both pollutants simultaneously.Here,we report an intelligent responsive polyurethane microsphere adsorbent doped with diallyl dimethylammonium chloride modified carbon nanotubes,termed as PUCD microspheres.The PUCD integrates bipolar adsorption sites,tunable micrometer-scale pores,and a near-infrared(NIR)-triggered in situ capture mechanism within a single platform,which achieves up to 98.3%dye removal,maintains strong adsorption performance across a wide pH range and retains 83.3%efficiency for rhodamine B after five cycles.Notably,the PUCD employs a temperature-responsive phase transition:under NIR irradiation,the microspheres undergo shrinkage,reducing the pore size to generate a‘polymer trap',enabling in situ capture of bacteria with>99%efficiencies for both Staphylococcus aureus and Escherichia coli.By immobilizing live bacteria,the PUCD microspheres substantially reduces the risk of pathogen desorption and toxin release.This promising platform offers a safe,efficient,and single-stage strategy for hospital wastewater purification,enabling the simultaneous elimination of dyes and pathogenic bacteria.展开更多
BACKGROUND:Acute liver failure is still a life-threaten- ing disease although it can be treated by liver transplanta- tion. This study was conducted to assess the molecular ad- sorbent recycling system (MARS), which m...BACKGROUND:Acute liver failure is still a life-threaten- ing disease although it can be treated by liver transplanta- tion. This study was conducted to assess the molecular ad- sorbent recycling system (MARS), which may bridge acute liver failure patients to liver transplantation. METHODS: Biochemical indexes and other clinical data were analyzed of 8 patients with acute liver failure, who had been treated by MARS for 34 times and subsequent Piggyback liver transplantation. RESULTS: After treatment with MARS, the levels of tran- saminase and total bilirubin decreased markedly, but coagu- lation function remained unimproved. All patients survived and discharged from the hospital. CONCLUSION: MARS is effective in bridging patients with acute liver failure to liver transplantation.展开更多
AIM:To identify prognostic factors for survival in patients with liver failure treated with a molecular adsorbent recirculating system(MARS). METHODS:MARS is a liver-assisting device that has been used in the treatmen...AIM:To identify prognostic factors for survival in patients with liver failure treated with a molecular adsorbent recirculating system(MARS). METHODS:MARS is a liver-assisting device that has been used in the treatment of liver failure to enable native liver recovery,and as a bridge to liver transplantation(LTX).We analyzed the 1-year outcomes of 188 patients treated with MARS,from 2001 to 2007, in an intensive care unit specializing in liver disease. Demographic,clinical and laboratory parameters were recorded before and after each treatment.One-year survival and the number of LTXs were recorded.Logistic regression analysis was performed to determine factors predicting survival. RESULTS:The study included 113 patients with acute liver failure(ALF),62 with acute-on-chronic liver failure(AOCLF),11 with graft failure(GF),and six with miscellaneous liver failure.LTX was performed for 29% of patients with ALF,18% with AOCLF and 55%with GF.The overall 1-year survival rate was 74% for ALF,27% for AOCLF,and 73% for GF.The poorest survival rate,6%,was noted in non-transplanted patients with alcohol-related AOCLF and cirrhosis,whereas,patients with enlarged and steatotic liver had 55% survival.The etiology of liver failure was the most important predictor of survival(P<0.0001).Other prognostic factors were encephalopathy(P=0.001)in paracetamol-related ALF, coagulation factors(P=0.049)and encephalopathy(P=0.064)in non-paracetamol-related toxic ALF,and alanine aminotransferase(P=0.013)and factor V levels(P =0.022)in ALF of unknown etiology. CONCLUSION:The etiology of liver disease was the most important prognostic factor.MARS treatment appears to be ineffective in AOCLF with end-stage cirrhosis without an LTX option.展开更多
BACKGROUND: Molecular adsorbents recirculating sys- tem (MARS) liver support therapy is the development of albumin dialysis. This study was to assess the successful ap- plication of MARS artificial liver support thera...BACKGROUND: Molecular adsorbents recirculating sys- tem (MARS) liver support therapy is the development of albumin dialysis. This study was to assess the successful ap- plication of MARS artificial liver support therapy as a bridge to re-transplantation in two cases of long anhepatic duration. METHODS: MARS therapy was given after failure plasma- exchange ( PE) treatment, which resulted in circulatory de- rangement and acute renal dysfunction in a 36-year-old male patient. Finally his uncontrolled anhepatic condition led to a successful re-transplantation. In another 48-year- old man who was diagnosed as having primary nonfunction (PNF) during the liver transplantation, 10-hour MARS treatment contributed to smooth bridging of his anhepatic phase. RESULTS: The two anhepatic patients were bridged for 26 and 17 hours respectively to re-transplantation with MARS therapy. CONCLUSION: Our experience proves that MARS artifi- cial liver can be an effective support for long time bridging PNF until re-transplantation is available.展开更多
A sensor based on the technique of a piezoelectric quartz crystal microbalance (QCM) is analyzed for the detection of six organic volatile compounds with high olive oil sensory significance, such as hexanal, acetic ac...A sensor based on the technique of a piezoelectric quartz crystal microbalance (QCM) is analyzed for the detection of six organic volatile compounds with high olive oil sensory significance, such as hexanal, acetic acid, Z-3-hexenyl acetate, undecane, 1-octen-3-ol and 2-butanone. Four sample concentrations have been exposed to each QCM sensor constructed. The detection system is based on the sample adsorption on the forty sensing films coated at the surfaces of forty AT-cut gold-coated quartz crystals. Each sensing film has been prepared with different solution concentrations of ten materials, usually used as chromatographic sta-tionary phases. Sensing film coating process shows excellent repeatability, with coefficient values less than 0.50%. The frequency shifts of the piezoelectric crystals due to the adsorption of the volatile compounds have been measured as sensor responses, using a static measurement system. The results show that only five QCM sensors, with high sensitivity values, are enough to the detection of the volatile compounds studied. Therefore, the developed detection system presented herein provides a rapid identification of organic volatile compounds with elevated olive oil sensory connotation and it could be a substitute technique to the analytical methods normally used for the analysis of the olive oil flavor.展开更多
Currently,the solid adsorbents with porous structure have been widely applied in CO_(2)capture.However,the unmodified MgO-ZrO_(2)adsorbents appeared to be low adsorption capacity of CO_(2).The solid adsorbent material...Currently,the solid adsorbents with porous structure have been widely applied in CO_(2)capture.However,the unmodified MgO-ZrO_(2)adsorbents appeared to be low adsorption capacity of CO_(2).The solid adsorbent materials were successfully synthesized by loading TEPA onto the pore MgO/ZrO_(2)carriers in the paper.The pore structure and surface characteristic of the samples were analyzed by using XRD,BET,FT-IR and SEM.The adsorbent materials exhibited microcrystalline state,and the crystallinity of all samples gradually decreased as the increase of TEPA content.The pore structure analysis indicated that the modification of MgO-ZrO_(2)adsorbents with TEPA led to the decrease of the specific surface areas,but the narrow micro-mesopore size distributions ranging from 1.8-12 nm in the adsorbents still were maintained.FT-IR spectrum results further verified the successful loading of TEPA.The adsorption capacity of the adsorbents for CO_(2)were tested by using an adsorption apparatus equipped with gas chromatography.The results indicated that when the TEPA loading reached 50%,the sample exhibited the maximum adsorption value for CO_(2),reaching 4.07 mmol/g under the operation condition of 75℃and atmospheric pressure.This result could be assigned to not only the base active sites but also the coexistence of both micropore and mesopore in the adsorbent.After three cycles tests for CO_(2)capture,the adsorption value of the sample for CO_(2)can also reached 95%of its original adsorption capacity,which verified the excellent cyclic operation stability.展开更多
Background: Acute hepatitis C virus infection leading to fulminant hepatitis is very rare whereas Hepatitis C virus (HCV) infection is one of the main causes of chronic liver disease worldwide. The repertoire of subst...Background: Acute hepatitis C virus infection leading to fulminant hepatitis is very rare whereas Hepatitis C virus (HCV) infection is one of the main causes of chronic liver disease worldwide. The repertoire of substances that accumulate in the blood in fulminant hepatic failure cause neurological abnormalities, aggravate injury to the liver and other organs, suppress the ability of residual hepatocytes to perform organ-specific functions (sick cell syndrome), and inhibit the hepatic regenerative response especially in fulminant hepatitis Virus C which has subacute clinical evolution and takes time to manifest. Liver support technology is evolving as different techniques become available that assist the remaining functional cell mass by providing specific liver functions. Case Presentation: We report a case of Fulminant C virus Hepatitis, successfully treated with albumin dialysis Molecular Adsorbent Recirculating System (MARS). At time of admittance the patient presented: Model End-stage Liver Disease (MELD)-36;Child Turcotte Pugh (CTP)-C(13);Sequential Organ Failure Assestment (SOFA)-12, Glasgow Coma Score (GCS)-11. The patient underwent six sessions of MARS in Intensive Care Unit (ICU) in association with standard medical therapy (SMT). The patient survived and was discharged from the hospital in good condition after 40 days without liver transplantation (LT).展开更多
Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,...Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,amidoximebased radiation grafted adsorbents have been identified as effective for iron removal.In this study,an amidoximefunctionalized,radiation-grafted adsorbent synthesized from polypropylene waste(PPw-g-AO-10)was employed to remove iron from leached geological samples.The adsorption process was systematically optimized by investigating the effects of pH,contact time,adsorbent dosage,and initial ferric ion concentration.Under optimal conditions-pH1.4,a contact time of 90 min,and an initial ferric ion concentration of 4500 mg/L-the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g.After optimizing the critical adsorption parameters,the adsorbent was applied to the leached geological samples,achieving a 91%removal of the iron content.The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO_(3),achieving a regeneration efficiency of 65%.These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.展开更多
Conventional powder/pellet-based systems used for mitigating the environmental challenges posed by CO_(2)emissions present inefficiencies in mass/heat transfer,pressure drop,and clogging.Monolithic adsorption material...Conventional powder/pellet-based systems used for mitigating the environmental challenges posed by CO_(2)emissions present inefficiencies in mass/heat transfer,pressure drop,and clogging.Monolithic adsorption materials have emerged as a promising alternative to such systems.Additive manufacturing(AM)enables precise structural optimization and active component control in monolithic adsorbents,enhancing the adsorption kinetics while minimizing mechanical wear.This review examines the progress in AM-driven CO_(2)adsorbent development,covering the following aspects:(1)fabrication techniques for monolithic adsorbents and key metrics for evaluating their mechanical and adsorption properties,(2)applications of AM methods(extrusion,coating,gel spinning,and 3D printing)under fixed-source and direct-air capture scenarios,and(3)integrated systems combining CO_(2)adsorption and conversion.However,balancing adsorption performance with mechanical strength is a critical challenge.The trade-off can be addressed through advanced AM strategies such as hybrid material architectures and computational design.Future advancements will hinge on hybrid AM techniques to decouple structural and functional demands,AI/ML-driven multi-objective optimization for pore structure refinement and stress distribution,and lifecycle sustainability analytics to reduce energy use and material waste.By synergizing these approaches,next-generation monolithic adsorbents can achieve high capacity,mechanical robustness,and cost-effectiveness,positioning AM as a scalable and sustainable platform for carbon capture technologies.展开更多
Although supported solid amine adsorbents have attracted great attention for CO_(2) capture,critical chemical deactivation problems including oxidative degradation and urea formation have severely restricted their pra...Although supported solid amine adsorbents have attracted great attention for CO_(2) capture,critical chemical deactivation problems including oxidative degradation and urea formation have severely restricted their practical applications for flue gas CO_(2) capture.In this work,we reveal that the nature of surface hydroxyl groups(metal hydroxyl Al–OH and nonmetal hydroxyl Si–OH)plays a key role in the deactivation mechanisms.The polyethyleneimine(PEI)supported on Al–OH-containing substrates suffers from severe oxidative degradation during the CO_(2) capture step due to the breakage of amine-support hydrogen bonding networks,but exhibits an excellent anti-urea formation feature by preventing dehydration of carbamate products under a pure CO_(2) regeneration atmosphere.In contrast,PEI supported on Si–OHcontaining substrates exhibits excellent anti-oxidative stability under simulated flue gas conditions by forming a robust hydrogen bonding protective network with Si–OH,but suffers from obvious urea formation during the pure CO_(2) regeneration step.We also reveal that the urea formation problem for PEI-SBA-15 can be avoided by the incorporation of an OH-containing PEG additive.Based on the intrinsic understanding of degradation mechanisms,we successfully synthesized an adsorbent 40PEI-20PEG-SBA-15 that demonstrates outstanding stability and retention of a high CO_(2) capacity of 2.45 mmol g^(−1) over 1000 adsorption–desorption cycles,together with negligible capacity loss during aging in simulated flue gas(10%CO_(2)+5%O_(2)+3%H_(2)O)for one month at 60–70℃.We believe this work makes great contribution to the advancement in the field of ultra-stable solid amine-based CO_(2) capture materials.展开更多
Desulfurization technology is rather difficult and urgently needed for carbon dioxide(CO_(2))utilization in industry.A new Cu(I)-based adsorbent was synthesized and examined for the capacity of removing carbonyl sulfi...Desulfurization technology is rather difficult and urgently needed for carbon dioxide(CO_(2))utilization in industry.A new Cu(I)-based adsorbent was synthesized and examined for the capacity of removing carbonyl sulfide(COS)from a CO_(2)stream in an effort to solve the competitive adsorption between CO_(2)and COS and to seek opportunity to advance adsorption capacity.A wide range of character-ization techniques were used to investigate the physicochemical properties of the synthesized Cu(I)adsorbent featuringπ-complexation and their correlations with the adsorption performance.Meanwhile,the first principal calculation software CP2K was used to develop an understanding of the adsorption mechanism,which can offer useful guidance for the adsorbent regeneration.The synthesized Cu(I)adsorbent,prepared by using copper citrate and citric acid on the ZSM-5(SiO_(2)/Al_(2)O_(3)=25)carrier,outperformed other adsorbents with varying formulations and carriers in adsorption capacities.Through optimization of the preparation and adsorption conditions for various adsorbents,the breakthrough adsorption capacity(Qb)for COS was further enhanced from 2.19 mg/g to 15.36 mg/g.The formed stableπ-complex bonds between COS and Cu(I),as confirmed by density func-tional theory calculations,were verified by the significant improvement in the adsorption capacity after regeneration at 600°C.The above advantages render the novel synthesized Cu(I)adsorbent a promising candidate featuring cost-effectiveness,high efficacy and good regenerability for desulfurization from a CO_(2)stream.展开更多
This study introduced a microwave-assisted pyrolysis method for the rapid and efficientpreparation of boron-doped porous biochar. The resulting biochar exhibited a large specificsurface area (933.39 m^(2)/g), a rich p...This study introduced a microwave-assisted pyrolysis method for the rapid and efficientpreparation of boron-doped porous biochar. The resulting biochar exhibited a large specificsurface area (933.39 m^(2)/g), a rich porous structure (1.044 cm3/g), and abundant active sites.Consequently, the prepared boron-doped porous biochar exhibited higher efficiency in adsorbingtetracycline with a maximum adsorption capacity of 413.223 mg/g, which significantlyexceeded that of unmodified biochar andmost commercial and reported adsorbents.The correlation analysis between the adsorption capacity and adsorbent characteristics revealedthat the formation of the –BCO_(2) group enhanced π–π electron donor–acceptor interactionsbetween boron-doped porous biochar and tetracycline. This mechanism mainlycontributed to the enhanced adsorption of tetracycline by boron-doped porous biochar. Additionally,the as-prepared boron-doped porous biochar exhibited broad applications in removingantibiotics (tetracycline), phenolics (bisphenol A), and dyes (methylene blue andrhodamine B). Moreover, the boron-doped porous biochar exhibited satisfactory stability,and its adsorption capacity can be nearly completely regenerated through simple heat treatment.This study provides new insights into the effectiveness of boron-doped carbonaceousmaterials in removing antibiotic contaminants.展开更多
Sodium-based adsorbents(Na_(2)CO_(3)/γ-Al_(2)O_(3))exhibit significant potential for commercial utilization in CO_(2)capture.Nevertheless,the requirement for high desorption temperatures poses challenges in terms of ...Sodium-based adsorbents(Na_(2)CO_(3)/γ-Al_(2)O_(3))exhibit significant potential for commercial utilization in CO_(2)capture.Nevertheless,the requirement for high desorption temperatures poses challenges in terms of the high-quality heat needed for desorption.This study integrated ZrO_(2)doping into a sodium-based adsorbent to enhance its CO_(2)capture performance and lower its desorption temperature.The research investigated the CO_(2)adsorption capacity,reaction rate,and desorption characteristics of the ZrO_(2)-doped Na_(2)CO_(3)/γ-Al_(2)O_(3)adsorbents in detail.Additionally,the catalytic mechanism of ZrO_(2)was elucidated through Density Functional Theory calculations.The results showed that ZrO_(2)doping increased the adsorption rate and capacity of the adsorbent and reduced the desorption energy consumption.Desorption reaction activation energy reduced to 44.8 kJ/mol.The adsorbent doped with 3wt.%ZrO_(2)demonstrated the highest adsorption capacity and rate under optimal conditions,with a reaction temperature of 45℃,an adsorption capacity of 1.66 mmol/g,and a carbon conversion rate of 80.2%.ZrO_(2)acted as a catalyst,enhancing CO_(2)and H_(2)O adsorption,and facilitated CO_(2)desorption in the sodium-based adsorbent by forming[ZrO(OH)]^(+)and OH^(−)through H_(2)O adsorption activation.The lower energy barrier(0.17 eV)for the dissociative adsorption pathway of H_(2)O molecules on the ZrO_(2)surface further supported the role of ZrO_(2)in enhancing the overall adsorption performance of the adsorbent in the carbon capture process.Ultimately,the ZrO_(2)-doped Na_(2)CO_(3)/γ-Al_(2)O_(3)adsorbent was identified as having low desorption energy consumption,high adsorption capacity,and rate,offering potential cost reductions in CO_(2)capture and representing a promising adsorbent for this application.展开更多
H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ ...H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ extracted.The effects of lithium titanium ratio,calcining temperature and time were investigated on the synthesis of Li2TiO3.Li2TiO3,H2TiO3 and the adsorbed Li＋ adsorbent were characterized by XRD and SEM.The lithium adsorption properties were investigated by the adsorption kinetics and adsorption isotherm.The results indicate that H2TiO3 has an excellent adsorptive capacity for Li＋.Two simplified kinetic models including the pseudo-first-order and pseudo-second-order equations were selected to follow the adsorption processes.The rate constants of adsorption for these kinetic models were calculated.The results show that the adsorption process can be described by the pseudo-second-order equation,and the process is proved to be a chemical adsorption.The adsorption process that H2TiO3 adsorbs Li＋ in LiCl solution well fits the Langmuir equation with monolayer adsorption.展开更多
Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally det...Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally determined. The performance parameters of adsorption capacity, air humidity, regeneration temperature and cooling volume were tested and discussed in detail. The results show that the properties of new adsorbents DH 5 and DH 7 on desiccant cooling are much better than those of common desiccants. The maximum adsorption volumes of water on DH 5 and DH 7 are 0.72?kg/kg and 0.73 ?kg/kg, respectively. The desiccant cooling volumes of DH 7and DH 5 are 2.2 and 1.3 times larger than those of silica gel and 13x(molecular sieve), respectively, after regeneration at 100?℃. The cooling volume per mass unit of DH 5 is 1.9 times larger that of 13x.展开更多
Lignin,the most abundant natural aromatic polymer globally,has garnered considerable interest due to its rich and diverse active functional groups and its antioxidant,antimicrobial,and adhesive properties.Recent resea...Lignin,the most abundant natural aromatic polymer globally,has garnered considerable interest due to its rich and diverse active functional groups and its antioxidant,antimicrobial,and adhesive properties.Recent research has significantly improved the performance of lignin-based hydrogels,suggesting their substantial potential in fields such as biomedicine,environmental science,and agriculture.This paper reviews the process of lignin extraction,systematically introduces synthesis strategies for preparing lignin-based hydrogels,and discusses the current state of research on these hydrogels in biomedical and environmental protection fields.It concludes by identifying the existing challenges in lignin hydrogel research and envisioning future prospects and development trends.展开更多
Experiments on Zn^2＋ and Cd^2＋ adsorptions on vermiculite in aqueous solutions were conducted to investigate the widely observed adsorbent concentration effect on the traditionally defined adsorption isotherm in the...Experiments on Zn^2＋ and Cd^2＋ adsorptions on vermiculite in aqueous solutions were conducted to investigate the widely observed adsorbent concentration effect on the traditionally defined adsorption isotherm in the adsorbate range 25--500 mg/L and adsorbent range 10--150 g/L. The results showed that the equilibrium ion adsorption density did not correspond to a unique equilibrium ion concentration in liquid phase. Three adsorbate/adsorbent ratios, the equilibrium adsorption density, the ratio of equilibrium adsorbate concentration in liquid phase to adsorbent concentration, and the ratio of initial adsorbate concentration to adsorbent concentration, were found to be related with unique values in the tested range. Based on the assumption that the equilibrium state of a liquid/solid adsorption system is determined by four mutually related components： adsorbate in liquid phase, adsorbate in solid phase, uncovered adsorption site and covered adsorption site, and that the equilibrium chemical potentials of these components should be equalized, a new model was presented for describing ion adsorption isotherm in liquid/solid systems. The proposed model fit well the experimental data obtained from the examined samples.展开更多
A novel amphoteric granular lignin adsorbent(AGLA) was prepared using magnesium lignosulfonate as a raw material which was provided by a straw sulfite pulp mill in Guangdong Province, China. A reactive dye(red K-3B) w...A novel amphoteric granular lignin adsorbent(AGLA) was prepared using magnesium lignosulfonate as a raw material which was provided by a straw sulfite pulp mill in Guangdong Province, China. A reactive dye(red K-3B) was used as an adsorbate to investigate the adsorption behavior by static and mobile ways. The removal of reactive red K-3B was found to be initially pH and concentration dependent. Moreover, an increase of solution temperature ranging from 5℃ to 60℃ helped to enhance the rate of intraparticle diffusion of adsorbate and changes in the size of the pores of the adsorbent and thus to reduce the adsorption time. The total breakthrough adsorption capacity was 531 mg/g, and the saturated adsorption capacity was 560 mg/g, which prevailed over the activated carbons evidently. The reactive red K-3B adsorbed on AGLA could be recovered with a mixture of alcohol, NaCl and HCl aqueous solutions. The recovery percentage could reach 92.4%.展开更多
According to the Doehlert's matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters...According to the Doehlert's matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters including the total yield, adsorption of methylene blue, adsorption of iodine, BET surface area, micro-pore volume are 35%—49%, 16.5—38 mg/g, 285—362 mg/g, 185—359 m2/g, and 0.112—0.224 m3/g, respectively. According to the experimental data, the multi-linear regression method was adopted to fit the relations between the characteristic parameters and influential factors. At final, through optimization method, the optimal adsorbent is obtained when using 62 min as hold time and 1105K as pyrolysis temperature. Under the conditions, the adsorbent was produced and compared the characteristic parameters with model forecast value, the coherence is satisfied.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52473139 and U21A2098)。
文摘Hospital wastewater contains complex pollutants,including residual organic dyes and antibiotic-resistant pathogens,posing severe risks to ecosystems and human health.Conventional adsorbents,constrained by monopolar functional groups and limited surface sites,fail to remove both pollutants simultaneously.Here,we report an intelligent responsive polyurethane microsphere adsorbent doped with diallyl dimethylammonium chloride modified carbon nanotubes,termed as PUCD microspheres.The PUCD integrates bipolar adsorption sites,tunable micrometer-scale pores,and a near-infrared(NIR)-triggered in situ capture mechanism within a single platform,which achieves up to 98.3%dye removal,maintains strong adsorption performance across a wide pH range and retains 83.3%efficiency for rhodamine B after five cycles.Notably,the PUCD employs a temperature-responsive phase transition:under NIR irradiation,the microspheres undergo shrinkage,reducing the pore size to generate a‘polymer trap',enabling in situ capture of bacteria with>99%efficiencies for both Staphylococcus aureus and Escherichia coli.By immobilizing live bacteria,the PUCD microspheres substantially reduces the risk of pathogen desorption and toxin release.This promising platform offers a safe,efficient,and single-stage strategy for hospital wastewater purification,enabling the simultaneous elimination of dyes and pathogenic bacteria.
文摘BACKGROUND:Acute liver failure is still a life-threaten- ing disease although it can be treated by liver transplanta- tion. This study was conducted to assess the molecular ad- sorbent recycling system (MARS), which may bridge acute liver failure patients to liver transplantation. METHODS: Biochemical indexes and other clinical data were analyzed of 8 patients with acute liver failure, who had been treated by MARS for 34 times and subsequent Piggyback liver transplantation. RESULTS: After treatment with MARS, the levels of tran- saminase and total bilirubin decreased markedly, but coagu- lation function remained unimproved. All patients survived and discharged from the hospital. CONCLUSION: MARS is effective in bridging patients with acute liver failure to liver transplantation.
基金Supported by A Scientific Grant From the Helsinki University Central Hospital Research Fund(EVO)
文摘AIM:To identify prognostic factors for survival in patients with liver failure treated with a molecular adsorbent recirculating system(MARS). METHODS:MARS is a liver-assisting device that has been used in the treatment of liver failure to enable native liver recovery,and as a bridge to liver transplantation(LTX).We analyzed the 1-year outcomes of 188 patients treated with MARS,from 2001 to 2007, in an intensive care unit specializing in liver disease. Demographic,clinical and laboratory parameters were recorded before and after each treatment.One-year survival and the number of LTXs were recorded.Logistic regression analysis was performed to determine factors predicting survival. RESULTS:The study included 113 patients with acute liver failure(ALF),62 with acute-on-chronic liver failure(AOCLF),11 with graft failure(GF),and six with miscellaneous liver failure.LTX was performed for 29% of patients with ALF,18% with AOCLF and 55%with GF.The overall 1-year survival rate was 74% for ALF,27% for AOCLF,and 73% for GF.The poorest survival rate,6%,was noted in non-transplanted patients with alcohol-related AOCLF and cirrhosis,whereas,patients with enlarged and steatotic liver had 55% survival.The etiology of liver failure was the most important predictor of survival(P<0.0001).Other prognostic factors were encephalopathy(P=0.001)in paracetamol-related ALF, coagulation factors(P=0.049)and encephalopathy(P=0.064)in non-paracetamol-related toxic ALF,and alanine aminotransferase(P=0.013)and factor V levels(P =0.022)in ALF of unknown etiology. CONCLUSION:The etiology of liver disease was the most important prognostic factor.MARS treatment appears to be ineffective in AOCLF with end-stage cirrhosis without an LTX option.
文摘BACKGROUND: Molecular adsorbents recirculating sys- tem (MARS) liver support therapy is the development of albumin dialysis. This study was to assess the successful ap- plication of MARS artificial liver support therapy as a bridge to re-transplantation in two cases of long anhepatic duration. METHODS: MARS therapy was given after failure plasma- exchange ( PE) treatment, which resulted in circulatory de- rangement and acute renal dysfunction in a 36-year-old male patient. Finally his uncontrolled anhepatic condition led to a successful re-transplantation. In another 48-year- old man who was diagnosed as having primary nonfunction (PNF) during the liver transplantation, 10-hour MARS treatment contributed to smooth bridging of his anhepatic phase. RESULTS: The two anhepatic patients were bridged for 26 and 17 hours respectively to re-transplantation with MARS therapy. CONCLUSION: Our experience proves that MARS artifi- cial liver can be an effective support for long time bridging PNF until re-transplantation is available.
文摘A sensor based on the technique of a piezoelectric quartz crystal microbalance (QCM) is analyzed for the detection of six organic volatile compounds with high olive oil sensory significance, such as hexanal, acetic acid, Z-3-hexenyl acetate, undecane, 1-octen-3-ol and 2-butanone. Four sample concentrations have been exposed to each QCM sensor constructed. The detection system is based on the sample adsorption on the forty sensing films coated at the surfaces of forty AT-cut gold-coated quartz crystals. Each sensing film has been prepared with different solution concentrations of ten materials, usually used as chromatographic sta-tionary phases. Sensing film coating process shows excellent repeatability, with coefficient values less than 0.50%. The frequency shifts of the piezoelectric crystals due to the adsorption of the volatile compounds have been measured as sensor responses, using a static measurement system. The results show that only five QCM sensors, with high sensitivity values, are enough to the detection of the volatile compounds studied. Therefore, the developed detection system presented herein provides a rapid identification of organic volatile compounds with elevated olive oil sensory connotation and it could be a substitute technique to the analytical methods normally used for the analysis of the olive oil flavor.
基金supported by Shanxi Provincial Key Research and Development Project(202102090301026)Graduate Education Innovation Project of Taiyuan University of Science and Technology(SY2023024)。
文摘Currently,the solid adsorbents with porous structure have been widely applied in CO_(2)capture.However,the unmodified MgO-ZrO_(2)adsorbents appeared to be low adsorption capacity of CO_(2).The solid adsorbent materials were successfully synthesized by loading TEPA onto the pore MgO/ZrO_(2)carriers in the paper.The pore structure and surface characteristic of the samples were analyzed by using XRD,BET,FT-IR and SEM.The adsorbent materials exhibited microcrystalline state,and the crystallinity of all samples gradually decreased as the increase of TEPA content.The pore structure analysis indicated that the modification of MgO-ZrO_(2)adsorbents with TEPA led to the decrease of the specific surface areas,but the narrow micro-mesopore size distributions ranging from 1.8-12 nm in the adsorbents still were maintained.FT-IR spectrum results further verified the successful loading of TEPA.The adsorption capacity of the adsorbents for CO_(2)were tested by using an adsorption apparatus equipped with gas chromatography.The results indicated that when the TEPA loading reached 50%,the sample exhibited the maximum adsorption value for CO_(2),reaching 4.07 mmol/g under the operation condition of 75℃and atmospheric pressure.This result could be assigned to not only the base active sites but also the coexistence of both micropore and mesopore in the adsorbent.After three cycles tests for CO_(2)capture,the adsorption value of the sample for CO_(2)can also reached 95%of its original adsorption capacity,which verified the excellent cyclic operation stability.
文摘Background: Acute hepatitis C virus infection leading to fulminant hepatitis is very rare whereas Hepatitis C virus (HCV) infection is one of the main causes of chronic liver disease worldwide. The repertoire of substances that accumulate in the blood in fulminant hepatic failure cause neurological abnormalities, aggravate injury to the liver and other organs, suppress the ability of residual hepatocytes to perform organ-specific functions (sick cell syndrome), and inhibit the hepatic regenerative response especially in fulminant hepatitis Virus C which has subacute clinical evolution and takes time to manifest. Liver support technology is evolving as different techniques become available that assist the remaining functional cell mass by providing specific liver functions. Case Presentation: We report a case of Fulminant C virus Hepatitis, successfully treated with albumin dialysis Molecular Adsorbent Recirculating System (MARS). At time of admittance the patient presented: Model End-stage Liver Disease (MELD)-36;Child Turcotte Pugh (CTP)-C(13);Sequential Organ Failure Assestment (SOFA)-12, Glasgow Coma Score (GCS)-11. The patient underwent six sessions of MARS in Intensive Care Unit (ICU) in association with standard medical therapy (SMT). The patient survived and was discharged from the hospital in good condition after 40 days without liver transplantation (LT).
文摘Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,amidoximebased radiation grafted adsorbents have been identified as effective for iron removal.In this study,an amidoximefunctionalized,radiation-grafted adsorbent synthesized from polypropylene waste(PPw-g-AO-10)was employed to remove iron from leached geological samples.The adsorption process was systematically optimized by investigating the effects of pH,contact time,adsorbent dosage,and initial ferric ion concentration.Under optimal conditions-pH1.4,a contact time of 90 min,and an initial ferric ion concentration of 4500 mg/L-the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g.After optimizing the critical adsorption parameters,the adsorbent was applied to the leached geological samples,achieving a 91%removal of the iron content.The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO_(3),achieving a regeneration efficiency of 65%.These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.
基金supported by National Natural Science Foundation of China(Grant Nos.52476223,22038011)the Programme of Introducing Talents of Discipline to Universities(Grant No.B23025)+1 种基金K.C.Wong Education Foundation,Fundamental Research Funds for the Central Universities(Grant No.xzy012023074)the Innovation Capability Support Program of Shaanxi(Grant Nos.2023KJKXX-004,2022KXJ-126).
文摘Conventional powder/pellet-based systems used for mitigating the environmental challenges posed by CO_(2)emissions present inefficiencies in mass/heat transfer,pressure drop,and clogging.Monolithic adsorption materials have emerged as a promising alternative to such systems.Additive manufacturing(AM)enables precise structural optimization and active component control in monolithic adsorbents,enhancing the adsorption kinetics while minimizing mechanical wear.This review examines the progress in AM-driven CO_(2)adsorbent development,covering the following aspects:(1)fabrication techniques for monolithic adsorbents and key metrics for evaluating their mechanical and adsorption properties,(2)applications of AM methods(extrusion,coating,gel spinning,and 3D printing)under fixed-source and direct-air capture scenarios,and(3)integrated systems combining CO_(2)adsorption and conversion.However,balancing adsorption performance with mechanical strength is a critical challenge.The trade-off can be addressed through advanced AM strategies such as hybrid material architectures and computational design.Future advancements will hinge on hybrid AM techniques to decouple structural and functional demands,AI/ML-driven multi-objective optimization for pore structure refinement and stress distribution,and lifecycle sustainability analytics to reduce energy use and material waste.By synergizing these approaches,next-generation monolithic adsorbents can achieve high capacity,mechanical robustness,and cost-effectiveness,positioning AM as a scalable and sustainable platform for carbon capture technologies.
基金supported by the Fundamental Research Funds for the National Natural Science Foundation of China 52225003,22208021,22109004the National Key R&D Program of China 2022YFB4101702.
文摘Although supported solid amine adsorbents have attracted great attention for CO_(2) capture,critical chemical deactivation problems including oxidative degradation and urea formation have severely restricted their practical applications for flue gas CO_(2) capture.In this work,we reveal that the nature of surface hydroxyl groups(metal hydroxyl Al–OH and nonmetal hydroxyl Si–OH)plays a key role in the deactivation mechanisms.The polyethyleneimine(PEI)supported on Al–OH-containing substrates suffers from severe oxidative degradation during the CO_(2) capture step due to the breakage of amine-support hydrogen bonding networks,but exhibits an excellent anti-urea formation feature by preventing dehydration of carbamate products under a pure CO_(2) regeneration atmosphere.In contrast,PEI supported on Si–OHcontaining substrates exhibits excellent anti-oxidative stability under simulated flue gas conditions by forming a robust hydrogen bonding protective network with Si–OH,but suffers from obvious urea formation during the pure CO_(2) regeneration step.We also reveal that the urea formation problem for PEI-SBA-15 can be avoided by the incorporation of an OH-containing PEG additive.Based on the intrinsic understanding of degradation mechanisms,we successfully synthesized an adsorbent 40PEI-20PEG-SBA-15 that demonstrates outstanding stability and retention of a high CO_(2) capacity of 2.45 mmol g^(−1) over 1000 adsorption–desorption cycles,together with negligible capacity loss during aging in simulated flue gas(10%CO_(2)+5%O_(2)+3%H_(2)O)for one month at 60–70℃.We believe this work makes great contribution to the advancement in the field of ultra-stable solid amine-based CO_(2) capture materials.
基金supported by the National Key Research and Development Program of China(2022YFA1504402)National Energy R&D Center of Petroleum Refining Technology(RIPP,SINOPEC)+2 种基金the National Natural Science Foundation of China(22472016 and U23B20169)Key R&D Program of Ningbo(No.2023Z144)the Fundamental Research Funds for the Central Universities(DUT22LAB601).
文摘Desulfurization technology is rather difficult and urgently needed for carbon dioxide(CO_(2))utilization in industry.A new Cu(I)-based adsorbent was synthesized and examined for the capacity of removing carbonyl sulfide(COS)from a CO_(2)stream in an effort to solve the competitive adsorption between CO_(2)and COS and to seek opportunity to advance adsorption capacity.A wide range of character-ization techniques were used to investigate the physicochemical properties of the synthesized Cu(I)adsorbent featuringπ-complexation and their correlations with the adsorption performance.Meanwhile,the first principal calculation software CP2K was used to develop an understanding of the adsorption mechanism,which can offer useful guidance for the adsorbent regeneration.The synthesized Cu(I)adsorbent,prepared by using copper citrate and citric acid on the ZSM-5(SiO_(2)/Al_(2)O_(3)=25)carrier,outperformed other adsorbents with varying formulations and carriers in adsorption capacities.Through optimization of the preparation and adsorption conditions for various adsorbents,the breakthrough adsorption capacity(Qb)for COS was further enhanced from 2.19 mg/g to 15.36 mg/g.The formed stableπ-complex bonds between COS and Cu(I),as confirmed by density func-tional theory calculations,were verified by the significant improvement in the adsorption capacity after regeneration at 600°C.The above advantages render the novel synthesized Cu(I)adsorbent a promising candidate featuring cost-effectiveness,high efficacy and good regenerability for desulfurization from a CO_(2)stream.
基金supported by the National Natural Science Foundation of China(Nos.52100062,and 52230001)China Postdoctoral Science Foundation(No.2023M732785).
文摘This study introduced a microwave-assisted pyrolysis method for the rapid and efficientpreparation of boron-doped porous biochar. The resulting biochar exhibited a large specificsurface area (933.39 m^(2)/g), a rich porous structure (1.044 cm3/g), and abundant active sites.Consequently, the prepared boron-doped porous biochar exhibited higher efficiency in adsorbingtetracycline with a maximum adsorption capacity of 413.223 mg/g, which significantlyexceeded that of unmodified biochar andmost commercial and reported adsorbents.The correlation analysis between the adsorption capacity and adsorbent characteristics revealedthat the formation of the –BCO_(2) group enhanced π–π electron donor–acceptor interactionsbetween boron-doped porous biochar and tetracycline. This mechanism mainlycontributed to the enhanced adsorption of tetracycline by boron-doped porous biochar. Additionally,the as-prepared boron-doped porous biochar exhibited broad applications in removingantibiotics (tetracycline), phenolics (bisphenol A), and dyes (methylene blue andrhodamine B). Moreover, the boron-doped porous biochar exhibited satisfactory stability,and its adsorption capacity can be nearly completely regenerated through simple heat treatment.This study provides new insights into the effectiveness of boron-doped carbonaceousmaterials in removing antibiotic contaminants.
基金supported by the Scientific and Technological Innovation Project of Carbon Emission Peak and Carbon Neutrality of Jiangsu Province(No.BK20220001)the Big Data Computing Center of Southeast University.
文摘Sodium-based adsorbents(Na_(2)CO_(3)/γ-Al_(2)O_(3))exhibit significant potential for commercial utilization in CO_(2)capture.Nevertheless,the requirement for high desorption temperatures poses challenges in terms of the high-quality heat needed for desorption.This study integrated ZrO_(2)doping into a sodium-based adsorbent to enhance its CO_(2)capture performance and lower its desorption temperature.The research investigated the CO_(2)adsorption capacity,reaction rate,and desorption characteristics of the ZrO_(2)-doped Na_(2)CO_(3)/γ-Al_(2)O_(3)adsorbents in detail.Additionally,the catalytic mechanism of ZrO_(2)was elucidated through Density Functional Theory calculations.The results showed that ZrO_(2)doping increased the adsorption rate and capacity of the adsorbent and reduced the desorption energy consumption.Desorption reaction activation energy reduced to 44.8 kJ/mol.The adsorbent doped with 3wt.%ZrO_(2)demonstrated the highest adsorption capacity and rate under optimal conditions,with a reaction temperature of 45℃,an adsorption capacity of 1.66 mmol/g,and a carbon conversion rate of 80.2%.ZrO_(2)acted as a catalyst,enhancing CO_(2)and H_(2)O adsorption,and facilitated CO_(2)desorption in the sodium-based adsorbent by forming[ZrO(OH)]^(+)and OH^(−)through H_(2)O adsorption activation.The lower energy barrier(0.17 eV)for the dissociative adsorption pathway of H_(2)O molecules on the ZrO_(2)surface further supported the role of ZrO_(2)in enhancing the overall adsorption performance of the adsorbent in the carbon capture process.Ultimately,the ZrO_(2)-doped Na_(2)CO_(3)/γ-Al_(2)O_(3)adsorbent was identified as having low desorption energy consumption,high adsorption capacity,and rate,offering potential cost reductions in CO_(2)capture and representing a promising adsorbent for this application.
基金Project(2008BAB35B04) supported by the National Key Technologies R&D Program of ChinaProject(2010QZZD003) supported by Central South University Advanced Research Program,China
文摘H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ extracted.The effects of lithium titanium ratio,calcining temperature and time were investigated on the synthesis of Li2TiO3.Li2TiO3,H2TiO3 and the adsorbed Li＋ adsorbent were characterized by XRD and SEM.The lithium adsorption properties were investigated by the adsorption kinetics and adsorption isotherm.The results indicate that H2TiO3 has an excellent adsorptive capacity for Li＋.Two simplified kinetic models including the pseudo-first-order and pseudo-second-order equations were selected to follow the adsorption processes.The rate constants of adsorption for these kinetic models were calculated.The results show that the adsorption process can be described by the pseudo-second-order equation,and the process is proved to be a chemical adsorption.The adsorption process that H2TiO3 adsorbs Li＋ in LiCl solution well fits the Langmuir equation with monolayer adsorption.
文摘Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally determined. The performance parameters of adsorption capacity, air humidity, regeneration temperature and cooling volume were tested and discussed in detail. The results show that the properties of new adsorbents DH 5 and DH 7 on desiccant cooling are much better than those of common desiccants. The maximum adsorption volumes of water on DH 5 and DH 7 are 0.72?kg/kg and 0.73 ?kg/kg, respectively. The desiccant cooling volumes of DH 7and DH 5 are 2.2 and 1.3 times larger than those of silica gel and 13x(molecular sieve), respectively, after regeneration at 100?℃. The cooling volume per mass unit of DH 5 is 1.9 times larger that of 13x.
基金supported by the National Natural Science Foundation of China(21706052,22278114)Natural Science Foundation of Henan Province(242300421575).
文摘Lignin,the most abundant natural aromatic polymer globally,has garnered considerable interest due to its rich and diverse active functional groups and its antioxidant,antimicrobial,and adhesive properties.Recent research has significantly improved the performance of lignin-based hydrogels,suggesting their substantial potential in fields such as biomedicine,environmental science,and agriculture.This paper reviews the process of lignin extraction,systematically introduces synthesis strategies for preparing lignin-based hydrogels,and discusses the current state of research on these hydrogels in biomedical and environmental protection fields.It concludes by identifying the existing challenges in lignin hydrogel research and envisioning future prospects and development trends.
文摘Experiments on Zn^2＋ and Cd^2＋ adsorptions on vermiculite in aqueous solutions were conducted to investigate the widely observed adsorbent concentration effect on the traditionally defined adsorption isotherm in the adsorbate range 25--500 mg/L and adsorbent range 10--150 g/L. The results showed that the equilibrium ion adsorption density did not correspond to a unique equilibrium ion concentration in liquid phase. Three adsorbate/adsorbent ratios, the equilibrium adsorption density, the ratio of equilibrium adsorbate concentration in liquid phase to adsorbent concentration, and the ratio of initial adsorbate concentration to adsorbent concentration, were found to be related with unique values in the tested range. Based on the assumption that the equilibrium state of a liquid/solid adsorption system is determined by four mutually related components： adsorbate in liquid phase, adsorbate in solid phase, uncovered adsorption site and covered adsorption site, and that the equilibrium chemical potentials of these components should be equalized, a new model was presented for describing ion adsorption isotherm in liquid/solid systems. The proposed model fit well the experimental data obtained from the examined samples.
文摘A novel amphoteric granular lignin adsorbent(AGLA) was prepared using magnesium lignosulfonate as a raw material which was provided by a straw sulfite pulp mill in Guangdong Province, China. A reactive dye(red K-3B) was used as an adsorbate to investigate the adsorption behavior by static and mobile ways. The removal of reactive red K-3B was found to be initially pH and concentration dependent. Moreover, an increase of solution temperature ranging from 5℃ to 60℃ helped to enhance the rate of intraparticle diffusion of adsorbate and changes in the size of the pores of the adsorbent and thus to reduce the adsorption time. The total breakthrough adsorption capacity was 531 mg/g, and the saturated adsorption capacity was 560 mg/g, which prevailed over the activated carbons evidently. The reactive red K-3B adsorbed on AGLA could be recovered with a mixture of alcohol, NaCl and HCl aqueous solutions. The recovery percentage could reach 92.4%.
文摘According to the Doehlert's matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters including the total yield, adsorption of methylene blue, adsorption of iodine, BET surface area, micro-pore volume are 35%—49%, 16.5—38 mg/g, 285—362 mg/g, 185—359 m2/g, and 0.112—0.224 m3/g, respectively. According to the experimental data, the multi-linear regression method was adopted to fit the relations between the characteristic parameters and influential factors. At final, through optimization method, the optimal adsorbent is obtained when using 62 min as hold time and 1105K as pyrolysis temperature. Under the conditions, the adsorbent was produced and compared the characteristic parameters with model forecast value, the coherence is satisfied.
