Objective:Endometrial tuberculosis,which commonly affects women of reproductive age,is a significant cause of intrauterine adhesions(IUA),potentially leading to hypomenorrhea,amenorrhea,and infertility.Hysteroscopic a...Objective:Endometrial tuberculosis,which commonly affects women of reproductive age,is a significant cause of intrauterine adhesions(IUA),potentially leading to hypomenorrhea,amenorrhea,and infertility.Hysteroscopic adhesiolysis is the primary treatment for IUA;however,studies specifically addressing its efficacy in tuberculosisinduced IUA remain scarce.This study aims to evaluate the therapeutic outcomes of hysteroscopic adhesiolysis for IUA caused by endometrial tuberculosis.Methods:This retrospective cohort study included patients diagnosed with tuberculosisinduced IUA who underwent hysteroscopic adhesiolysis at the Third Xiangya Hospital of Central South University between May 2014 and October 2022.Clinical data including age,medical history,adhesion severity,surgical treatment,and reproductive outcomes were analyzed.Results:Among 39 patients identified,2 were lost to follow-up.A total of 37 patients were included,with a follow-up duration ranging from 6 months to 9 years.Hypomenorrhea was reported in 24(64.9%)patients,secondary amenorrhea in 10(27.0%)patients,and normal menstruation in 3(8.1%)patients.Most patients presented with primary infertility(59.5%),and only 2(5.4%)had secondary infertility.The median American Fertility Society(AFS)score at initial assessment was 10(range,8−12);8(21.6%)patients had moderate IUA,and 29(78.4%)had severe IUA.A total of 86 surgical procedures were performed across 37 patients,with 27 patients undergoing 2 or more surgeries.Postoperatively,25(67.6%)patients achieved normalization of the uterine cavity,while 12(32.4%)still had a reduced cavity.Only 7(18.9%)patients had a grossly normal endometrium at the final surgery,all of whom had moderate adhesions at the initial procedure.Menstrual flow returned to normal in 12(32.4%)patients,while 25(67.6%)continued to experience hypomenorrhea.Of 29 patients who attempted in vitro fertilization and embryo transfer(IVF-ET),only 6(20.7%)conceived.Among these,4(13.8%)delivered at term via cesarean section;one case was complicated by postpartum hemorrhage due to uterine atony and another by placental adhesion.Conclusion:Endometrial tuberculosis can lead to severe IUA.Hysteroscopic adhesiolysis facilitates cavity restoration and improvement of menstrual conditions,but the overall reproductive outcomes remain suboptimal.展开更多
This paper investigates the adhesive nanocontact behavior of an elastic halfplane indented by a rigid cylindrical indenter,incorporating the simultaneous effects of surface elasticity,couple stresses,and adhesion.The ...This paper investigates the adhesive nanocontact behavior of an elastic halfplane indented by a rigid cylindrical indenter,incorporating the simultaneous effects of surface elasticity,couple stresses,and adhesion.The free surface of the half-plane is modeled by the Steigmann-Ogden surface elasticity theory,while the bulk material behavior is described by the classical couple-stress elasticity theory.The adhesion at the contact interface is characterized by the Maugis-Dugdale(MD)adhesive contact model.Building on the fundamental nonclassical Flamant solution,the governing equations and boundary conditions of the nanocontact problem are reformulated into a system of triple integral equations.These equations are solved numerically by the Gauss-Chebyshev quadratures in combination with an iterative algorithm.The validation against the existing literature confirms the accuracy and robustness of the proposed solution methodology.Comprehensive parametric studies are performed to elucidate the critical roles of surface elasticity and couple stresses in adhesive nanocontact.The numerical results provide insights into the complex interactions among surface,couple-stress,and adhesive effects.Specifically,the interplay between the surface and adhesive effects is predominantly competitive,while the interaction between the couple stresses and adhesion exhibits an intricate nature.The findings highlight the necessity of simultaneously considering surface elasticity,couple stresses,and adhesion in nanoindentation analyses to achieve accurate predictions of material responses.展开更多
Since 2009,perovskite solar cells(PSCs)have advanced significantly,achieving over 26%efficiency for single-junction devices and exceeding 34%for silicon-perovskite tandem cells.Despite these successes,the weak adhesio...Since 2009,perovskite solar cells(PSCs)have advanced significantly,achieving over 26%efficiency for single-junction devices and exceeding 34%for silicon-perovskite tandem cells.Despite these successes,the weak adhesion of C_(60)to perovskite layers,due to van der Waals interactions,hinders long-term stability.In this study,we introduce electron-deficient intermolecular adhesives(EDIAs)as a novel interlayer material to enhance adhesion between perovskite and C_(60)layers.Comprehensive analyses,including density functional theory calculations,microscopy,and spectroscopy,demonstrate that EDIAs,particularly NDI-C9-Ace comprising of three key functionalities:aπ-electron-deficient arene core,a hydrophobic passivation core,and a secondary-bond anchoring core,significantly improve bonding strength and recombination passivation.This leads to enhanced efficiency as well as enhanced mechanical and photochemical stability in PSCs.Long-term stability tests further confirm the superior durability of EDIA-enhanced devices.This study highlights EDIA as a promising strategy for enhancing the robustness and efficiency of PSCs.展开更多
This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a ...This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a general part covering the grand lines and more in-depth views of more recent tannin,lignin,carbohydrate and soy bioadhesives,somemix of the other bio raw materials with soy protein and soy flour and some other differently sourced bioadhesives for wood,this review presents a more in-depth part on starch-based wood adhesives and a more indepth part covering plant protein-based adhesives.It must be kept in mind that the review is focused on completely or almost completely biosourced adhesives,the fashionable adhesives derived from mixes of biosourced materials with synthetic resins having been intentionally excluded.This choice was made as the latter constitute only an intermediate interval,possibly temporary if even for a somewhat long times,towards a final full bioeconomy of scale in this field.This review also focuses on more recent results,mainly obtained in the last 10–20 years,thus on adhesive formulations really innovative and sometimes even non-traditional.In all these fields there is still a lot of possibility of innovation for relevant formulation as this field is still in rapid growth.展开更多
Polymeric materials which can undergo controlled degradation and recycling are of great significance for a sustainable society.Although tremendous progress has been made in the degradation and recycling of both thermo...Polymeric materials which can undergo controlled degradation and recycling are of great significance for a sustainable society.Although tremendous progress has been made in the degradation and recycling of both thermoplastic and thermoset plastics,the development of high-performance degradable polymer adhesives is rare.Here,we have prepared high-performance nucleobase-containing thioctic acid-based supramolecular polymer adhesives through free radical polymerization.The specific hydrogen-bonding interactions between complementary nucleobases greatly improve the weak cohesion of the thioctic acid-based polymers and enhance the environmental stability of the thioctic acidbased polymers simultaneously.Degradation of the nucleobase-containing thioctic acid-based supramolecular polymers is achieved by the reduction of the disulfide backbone,and the cycle of degradation and repolymerization is further achieved via oxidative polymerization.The adhesion strength of the nucleobase-containing thioctic acid-based supramolecular polymers after two cycles of degradation and repolymerization still reaches as high as 4.7±0.3 MPa.This work provides an approach for the development of environmentally stable and high-performance degradable thioctic acid-based adhesives.展开更多
Due to their high mechanical compliance and excellent biocompatibility,conductive hydrogels exhibit significant potential for applications in flexible electronics.However,as the demand for high sensitivity,superior me...Due to their high mechanical compliance and excellent biocompatibility,conductive hydrogels exhibit significant potential for applications in flexible electronics.However,as the demand for high sensitivity,superior mechanical properties,and strong adhesion performance continues to grow,many conventional fabrication methods remain complex and costly.Herein,we propose a simple and efficient strategy to construct an entangled network hydrogel through a liquid-metal-induced cross-linking reaction,hydrogel demonstrates outstanding properties,including exceptional stretchability(1643%),high tensile strength(366.54 kPa),toughness(350.2 kJ m^(−3)),and relatively low mechanical hysteresis.The hydrogel exhibits long-term stable reusable adhesion(104 kPa),enabling conformal and stable adhesion to human skin.This capability allows it to effectively capture high-quality epidermal electrophysiological signals with high signal-to-noise ratio(25.2 dB)and low impedance(310 ohms).Furthermore,by integrating advanced machine learning algorithms,achieving an attention classification accuracy of 91.38%,which will significantly impact fields like education,healthcare,and artificial intelligence.展开更多
Purpose–This study aims to propose a cooperative adhesion control method for trains with multiple motors electric locomotives.The method is intended to optimize the output torque of each motor,maximize the utilizatio...Purpose–This study aims to propose a cooperative adhesion control method for trains with multiple motors electric locomotives.The method is intended to optimize the output torque of each motor,maximize the utilization of train adhesion within the total torque command,reduce the train skidding/sliding phenomenon and achieve optimal adhesion utilization for each axle,thus realizing the optimal allocation of the multi-motor electric locomotives.Design/methodology/approach–In this study,a model predictive control(MPC)-based cooperative maximum adhesion tracking control method for multi-motor electric locomotives is presented.Firstly,train traction system with multiple motors is constructed in accordance with Newton’s second law.These equations include the train dynamics equations,the axle dynamics equations,and the wheel-rail adhesion coefficient equations.Then,a new MPC-based multi-axle adhesion co-optimization method is put forward.This method calculates the optimal output torque through real-time iteration based on the known reference slip speed to achieve multi-axle co-optimization under different circumstances.Findings–This paper presents a MPC system designed for the cooperative control of multi-axle adhesion.The results indicate that the proposed control system is able to optimize the adhesion of multiple axles under numerous different conditions and achieve the optimal power distribution based on the reduction of train skidding/sliding.Originality/value–This study presents a novel cooperative adhesion tracking control scheme.It is designed for multi-motor electric locomotives,which has rarely been studied before.And simulations are carried out in different conditions,including variable surfaces and motor failing.展开更多
Objective:Cytotoxic T lymphocytes(CTLs)play a crucial role in the therapeutic approach to hepatocellular carcinoma(HCC).Recent research has indicated that junctional adhesion molecule-like protein(JAML)enhances the an...Objective:Cytotoxic T lymphocytes(CTLs)play a crucial role in the therapeutic approach to hepatocellular carcinoma(HCC).Recent research has indicated that junctional adhesion molecule-like protein(JAML)enhances the antitumor activity of CD8+T cells.Our study investigates the role of JAML+CD8+T cells in HCC.Methods:We utilized time-of-flight mass cytometry and an orthotopic mouse model of HCC to examine histone modifications in tumor-infiltrating immune cells undergoing immunotherapy.Flow cytometry was used to assess CD4+T cells differentiation and JAML expression in CD8+T cells infiltrating HCC.Correlation analysis revealed a strong positive correlation between lactate dehydrogenase A+(LDHA+)CD4+T cells and JAML+CD8+T cells.Subsequently,we evaluated the therapeutic effects of an agonistic anti-JAML antibody,both alone and combined with immunotherapy.Finally,RNA sequencing was conducted to identify potential regulatory mechanisms.Results:Immunotherapy significantly increased the percentage of CD8+T cells infiltrating HCC and induced histone modifications,such as H3K18 lactylation(H3K18la)in CD4+T cells.Flow cytometry analysis revealed that lactate promotes the differentiation of CD4+T cells into Th1 cells.LDHA,an enzyme that converts pyruvate to lactate,plays a key role in this process.Correlation analysis revealed a strong positive relationship between LDHA+CD4+T cells and JAML+CD8+T cells in patients who responded to immunotherapy.Moreover,high JAML expression in CD8+T cells was associated with a more favorable prognosis.In vivo experiments demonstrated that agonistic anti-JAML antibody therapy reduced tumor volume and significantly prolonged the survival of tumor-bearing mice,independent of the effects of anti-programmed cell death protein ligand-1 antibody(αPD-L1)-mediated immunotherapy.Pathway enrichment analysis further revealed that JAML enhances CTL responses through the oxidative phosphorylation pathway.Conclusions:Activation of JAML enhances CTL responses in HCC treatment,independent ofαPD-L1-mediated immunotherapy,providing a promising strategy for advanced HCC.展开更多
BACKGROUND Regulator of G protein signaling(RGS)proteins participate in tumor formation and metastasis by acting on theα-subunit of heterotrimeric G proteins.The speci-fic effect of RGS,particularly RGS4,on the progr...BACKGROUND Regulator of G protein signaling(RGS)proteins participate in tumor formation and metastasis by acting on theα-subunit of heterotrimeric G proteins.The speci-fic effect of RGS,particularly RGS4,on the progression of gastric cancer(GC)is not yet clear.AIM To explore the role and underlying mechanisms of action of RGS4 in GC develop-ment.METHODS The prognostic significance of RGS4 in GC was analyzed using bioinformatics based public databases and verified by immunohistochemistry and quantitative polymerase chain reaction in 90 patients with GC.Function assays were employed to assess the carcinogenic impact of RGS4,and the mechanism of its possible influence was detected by western blot analysis.A nude mouse xenograft model was established to study the effects of RGS4 on GC growth in vitro.RESULTS RGS4 was highly expressed in GC tissues compared with matched adjacent normal tissues.Elevated RGS4 expression was correlated with increased tumor-node-metastasis stage,increased tumor grade as well as poorer overall survival in patients with GC.Cell experiments demonstrated that RGS4 knockdown suppressed GC cell proliferation,migration and invasion.Similarly,xenograft experiments confirmed that RGS4 silencing significantly inhibited tumor growth.Moreover,RGS4 knockdown resulted in reduced phosphorylation levels of focal adhesion kinase,phosphatidyl-inositol-3-kinase,and protein kinase B,decreased vimentin and N-cadherin,and elevated E-cadherin.CONCLUSION High RGS4 expression in GC indicates a worse prognosis and RGS4 is a prognostic marker.RGS4 influences tumor progression via the focal adhesion kinase/phosphatidyl-inositol-3-kinase/protein kinase B pathway and epithelial-mesenchymal transition.展开更多
Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrat...Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.展开更多
The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on ...The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on untangling the underlying impact of varying adhesive cohesive or adhesion properties is limited and sometimes appears to provide conflicting conclusions.Comparison between the available studies is also often difficult due to variations in armour systems or ballistic testing being conducted.This review scrutinises the available research,identifying six critical properties of an adhesive layer in determining ballistic performance:elastic modulus,fracture strain,acoustic impedance,tensile bond strength,shear bond strength,and thickness.The impact of each of these properties on ballistic performance is discussed in detail,with clear description of the underlying processes involved,allowing clear optimisation goals to be established depending on the ceramic armour specification.展开更多
The ability of queens and males of most ant species to disperse by flight has fundamentally contributed to the group’s evolutionary and ecological success and is a determining factor to take into account for biogeogr...The ability of queens and males of most ant species to disperse by flight has fundamentally contributed to the group’s evolutionary and ecological success and is a determining factor to take into account for biogeographic studies(Wagner and Liebherr 1992;Peeters and Ito 2001;Helms 2018).展开更多
Hydrogel-based flexible sensors are emerging as ideal candidates for wearable devices and soft robotics.However,most current hydrogels possess limited physicochemical properties,which hinder their practical applicatio...Hydrogel-based flexible sensors are emerging as ideal candidates for wearable devices and soft robotics.However,most current hydrogels possess limited physicochemical properties,which hinder their practical application in long-term and complex scenarios.Herein,inspired by the unique structure of the barnacle,we design multifunctional poly(DMAPA-co-PHEA)hydrogels(CP hydrogels)by employing multiple physical crosslinks in the presence of Ag nanoparticles and NaCl additives.Owing to the synergistic effect of cation-πinteractions,hydrophobic interactions,and ionic bonds,the CP hydrogels exhibit high stretchability(strain up to 1430%),strong adhesion(22.8 kPa),satisfactory antibacterial activity,stable anti-icing ability(<20 kPa after 20 icing-deicing cycles),and high electrical conductivity(18.5 mS/cm).Additionally,the CP hydrogels show fast and sensitive responsiveness and cycling stability and can attach directly to human skin to accurately detect both human motions and tiny physiological signals as a flexible wearable sensor.Collectively,this work significantly contributes a straightforward and efficient design strategy for the development of multifunctional hydrogels,broadening their application scenarios.展开更多
This study aims to investigate the failure modes at the interface of semi-flexible pavement(SFP)materials.The cohesive and wetting properties of asphalt materials,as well as two types of grout(early strength cement gr...This study aims to investigate the failure modes at the interface of semi-flexible pavement(SFP)materials.The cohesive and wetting properties of asphalt materials,as well as two types of grout(early strength cement grout-ELS and high strength cement grout-CHS),were evaluated through pull-out tests and contact angle experiments.The rheological properties of the grout/asphalt mortar were assessed using dynamic shear rheometer(DSR)testing.The interaction coefficient,complex shear modulus,and complex viscosity coefficients of the grout/asphalt mortar were calculated to analyze the interaction between the grout and asphalt.Failure modes were identified through image analysis of semi-circular bending test(SCB)specimens.Results indicate that ELS specimens exhibit a lower grout/asphalt interface failure ratio compared to CHS specimens,due to the superior wettability and interaction of ELS grout.As the temperature increases,the proportions of cement fracture and aggregate failure decrease,while the proportion of asphalt cohesive failure surfaces increases.Furthermore,the bonding strength of SBS-modified asphalt with the grout exceeds that of pure asphalt.展开更多
The limited metal-polymer interlaminar property is a significant obstacle to the advancement of Ti/Carbon Fiber(CF)/Polyether Ether Ketone(PEEK)hybrid laminates.We report for the first time a novel method by utilizing...The limited metal-polymer interlaminar property is a significant obstacle to the advancement of Ti/Carbon Fiber(CF)/Polyether Ether Ketone(PEEK)hybrid laminates.We report for the first time a novel method by utilizing the mussel-inspired Polydopamine(PDA)to introduce a strong chemical-physical bonding between titanium and PEEK.The enhanced Fiber-Metal Laminate(FML)exhibits a significant 48.82%enhancement in Interlaminar Shear Strength(ILSS).In addition,it alters the failure mode of the FML from single metal-resin interlaminar delamination to a multi-mechanism,including debonding,delamination of different composite layers,leading to a 28.57%improvement in maximum displacement.展开更多
As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(H...As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(HKL)is limited due to its poor crosslinking reactivity.Hence,for the first time,the present study reports the facile oxidation of HKL involving a redox reaction with silver-ammonia complexes([(AgNH3)2]+),primarily focusing on oxidation to produce reactive quinones and promote C-C linkages during reaction.This study aims to increases reactivity of oxidized HKL for effective crosslinking with monoethanolamine(MEA)for the development of bio-based wood adhesives.The characterization,including 13C-nuclear magnetic resonance(NMR)and Fourier transform infrared(FT-IR)spectroscopy,confirms the oxidation reaction,such as the formation of quinones(C=O)and subsequent crosslinking between the oxidized HKL molecules and MEA.Additionally,gel permeation chromatography(GPC)confirms the C-C and C-O linkages with increased molecular weight after oxidation,and is supported by differential scanning calorimetry(DSC)which shows the exothermic reaction due to the crosslinking of the oxidized HKL molecules via condensation to form C-C and C-O linkages.The crosslinked HKL/MEA-based adhesives underwent mild reaction and achieved a maximum dry shear strength of 0.77 MPa,which exceeds the standard requirement of 0.6 MPa.These findings demonstrate not only a one-pot oxidation for improving the reactivity of HKL using silver complexes,but also its facile crosslinking with MEA for sustainable bio-based wood adhesives.展开更多
The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing ad...The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing adhesives(ESOx-FPF)were designed and synthesized by crosslinking two prepolymers,FPF-B(derived from side-chain fluorinated diol,isocyanate,and aminoboric acid)and ESO-B(synthesized from biobased epoxy soybean oil and aminoboric acid),through dynamic boro-oxygen bonds.The resulting adhesive exhibited an optimal tensile strength of 42 MPa and the shear strength on steel plates reached as high as 3.89 MPa.More importantly,benefiting from the dynamic reversibility of the boron-oxygen bonds along with the hydrogen bonds interaction,ESOx-FPF can be welded with the assistance of solvents and recycled for multiple cycles.The outstanding healing efficiency and excellent reprocessability of these functional adhesives were confirmed by mechanical testing.Moreover,the as-prepared adhesives demonstrated universal and remarkable adhesion to various substrates,such as aromatic polyamide,aluminum plates and polycarbonate,meanwhile,they could be easily disassembled and recycled using ethanol without damaging the substrates surface.This study not only provides a simple strategy for the synthesis of eco-friendly adhesives with weldable and recyclable properties,but also sheds light on the development of other functional materials utilizing dynamic covalent chemistry.展开更多
Gecko-inspired van der Waals force-based adhesion technology demonstrates significant potential for robotic operations.While superior adhesion is achieved under parallel contact during testing,engineering operations o...Gecko-inspired van der Waals force-based adhesion technology demonstrates significant potential for robotic operations.While superior adhesion is achieved under parallel contact during testing,engineering operations often involve non-parallel contact,weakening adhesion,and compromising task stability and efficiency.Stable attachment under such non-parallel contacts remains challenging.Inspired by the soft muscle and rigid bone in the gecko’s sole,this study proposes a self-adaptive core-shell dry adhesive by embedding a thin,rigid piece into a soft,thick elastomer comprising a top adhesion tip with a mushroom-like geometry for interfacial adhesion based on the van der Waals force and a bottom core-shell configuration for interface stress regulation.Unlike traditional core-shell structures with a fixed“dead core,”the proposed“live core”rotates within the soft shell,mimicking skeletal joints.This enables stress equalization at the interface and facilitates adaptive contact to macroscopic interfacial angle errors.This innovative core-shell configuration demonstrates an adhesion strength 100 times higher than conventional homogeneous structures under non-parallel contact and offers anti-overturning ability by mitigating torsional effects.The proposed strategy can advance the development of gecko-inspired adhesion-based devices and systems.展开更多
Background:Postoperative complications,particularly those involving lymphatic drainage,remain a significantchallenge for patients undergoing axillary lymphadenectomy(ALND)as part of breast cancer surgery.Thesecomplica...Background:Postoperative complications,particularly those involving lymphatic drainage,remain a significantchallenge for patients undergoing axillary lymphadenectomy(ALND)as part of breast cancer surgery.Thesecomplications can delay the initiation of adjuvant therapies,increase healthcare costs,and negatively affectpatients’quality of life.This study evaluated the use of a latex-based tissue adhesive(LTA)as an intraoperativestrategy to prevent seroma formation and prolonged lymphorrhea following axillary dissection.Methods:In this prospective study,65 female patients diagnosed with stage Ⅱb-Ⅲ breast cancer and clinicallyconfirmed axillary lymph node involvement were enrolled.Participants were divided into two groups.The studygroup(n=33)received an intraoperative application of LTA without drainage,while the control group(n=32)underwent standard ALND with placement of a silicone vacuum drain.Postoperative outcomes assessed includedlymphatic drainage volume,number of aspirations,duration of lymphorrhea,length of hospital stay,and incidence of complications.Results:Use of the LTA significantly reduced both the volume and duration of postoperative lymphorrhea.Bypostoperative day 10,the average wound exudate volume in the LTA group was 8.2±3.3 mL,compared to54.1±3.9 mL in the control group—an 84.8%reduction.The LTA group also experienced shorter hospital staysand fewer cases of postoperative seroma requiring intervention.Conclusion:LTA appears to be a safe,effective,and practical intraoperative technique for preventing lymphaticcomplications after ALND.Its use may reduce dependence on drainage systems,shorten hospitalization,andsupport earlier initiation of adjuvant therapies,ultimately improving surgical outcomes and patient recovery.展开更多
Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauc...Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauchlackierung).The wetting behaviour of adhesive on these surfaces and the resulting contact angles were analysed to evaluate bonding effectiveness.Design/methodology/approach–Primer paint was applied to glass fibre reinforced plastic(GFRP)materials and cataphoresis coating was applied to steel.Contact angles of the coated surfaces were measured and compared to those of the uncoated(natural)surfaces.Findings–Results showed that applying primer to GFRP and KTL to steel increased their surface energy compared to untreated surfaces.A decrease in contact angle correlated with improved wetting,suggesting enhanced adhesion potential.Originality/value–While the effects of surface coatings on adhesion have been studied,there is limited research specifically on the adhesion-enhancing potential of KTL coatings.Typically used for corrosion resistance,KTL is shown here to also improve adhesion.The novelty lies in experimentally demonstrating KTL’s dual role as both a protective and adhesion-enhancing layer.展开更多
基金supported by the Wisdom Accumulation and Talent Cultivation Project of Third Xiangya Hosipital of Central South University,China(YX202112).
文摘Objective:Endometrial tuberculosis,which commonly affects women of reproductive age,is a significant cause of intrauterine adhesions(IUA),potentially leading to hypomenorrhea,amenorrhea,and infertility.Hysteroscopic adhesiolysis is the primary treatment for IUA;however,studies specifically addressing its efficacy in tuberculosisinduced IUA remain scarce.This study aims to evaluate the therapeutic outcomes of hysteroscopic adhesiolysis for IUA caused by endometrial tuberculosis.Methods:This retrospective cohort study included patients diagnosed with tuberculosisinduced IUA who underwent hysteroscopic adhesiolysis at the Third Xiangya Hospital of Central South University between May 2014 and October 2022.Clinical data including age,medical history,adhesion severity,surgical treatment,and reproductive outcomes were analyzed.Results:Among 39 patients identified,2 were lost to follow-up.A total of 37 patients were included,with a follow-up duration ranging from 6 months to 9 years.Hypomenorrhea was reported in 24(64.9%)patients,secondary amenorrhea in 10(27.0%)patients,and normal menstruation in 3(8.1%)patients.Most patients presented with primary infertility(59.5%),and only 2(5.4%)had secondary infertility.The median American Fertility Society(AFS)score at initial assessment was 10(range,8−12);8(21.6%)patients had moderate IUA,and 29(78.4%)had severe IUA.A total of 86 surgical procedures were performed across 37 patients,with 27 patients undergoing 2 or more surgeries.Postoperatively,25(67.6%)patients achieved normalization of the uterine cavity,while 12(32.4%)still had a reduced cavity.Only 7(18.9%)patients had a grossly normal endometrium at the final surgery,all of whom had moderate adhesions at the initial procedure.Menstrual flow returned to normal in 12(32.4%)patients,while 25(67.6%)continued to experience hypomenorrhea.Of 29 patients who attempted in vitro fertilization and embryo transfer(IVF-ET),only 6(20.7%)conceived.Among these,4(13.8%)delivered at term via cesarean section;one case was complicated by postpartum hemorrhage due to uterine atony and another by placental adhesion.Conclusion:Endometrial tuberculosis can lead to severe IUA.Hysteroscopic adhesiolysis facilitates cavity restoration and improvement of menstrual conditions,but the overall reproductive outcomes remain suboptimal.
基金Project supported by the National Natural Science Foundation of China(No.12072072)。
文摘This paper investigates the adhesive nanocontact behavior of an elastic halfplane indented by a rigid cylindrical indenter,incorporating the simultaneous effects of surface elasticity,couple stresses,and adhesion.The free surface of the half-plane is modeled by the Steigmann-Ogden surface elasticity theory,while the bulk material behavior is described by the classical couple-stress elasticity theory.The adhesion at the contact interface is characterized by the Maugis-Dugdale(MD)adhesive contact model.Building on the fundamental nonclassical Flamant solution,the governing equations and boundary conditions of the nanocontact problem are reformulated into a system of triple integral equations.These equations are solved numerically by the Gauss-Chebyshev quadratures in combination with an iterative algorithm.The validation against the existing literature confirms the accuracy and robustness of the proposed solution methodology.Comprehensive parametric studies are performed to elucidate the critical roles of surface elasticity and couple stresses in adhesive nanocontact.The numerical results provide insights into the complex interactions among surface,couple-stress,and adhesive effects.Specifically,the interplay between the surface and adhesive effects is predominantly competitive,while the interaction between the couple stresses and adhesion exhibits an intricate nature.The findings highlight the necessity of simultaneously considering surface elasticity,couple stresses,and adhesion in nanoindentation analyses to achieve accurate predictions of material responses.
基金supported by National Research Foundation of Korea(NRF)(RS-2024-00336766 and RS-2023-00301974)support of the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(RS-2023-00220748)。
文摘Since 2009,perovskite solar cells(PSCs)have advanced significantly,achieving over 26%efficiency for single-junction devices and exceeding 34%for silicon-perovskite tandem cells.Despite these successes,the weak adhesion of C_(60)to perovskite layers,due to van der Waals interactions,hinders long-term stability.In this study,we introduce electron-deficient intermolecular adhesives(EDIAs)as a novel interlayer material to enhance adhesion between perovskite and C_(60)layers.Comprehensive analyses,including density functional theory calculations,microscopy,and spectroscopy,demonstrate that EDIAs,particularly NDI-C9-Ace comprising of three key functionalities:aπ-electron-deficient arene core,a hydrophobic passivation core,and a secondary-bond anchoring core,significantly improve bonding strength and recombination passivation.This leads to enhanced efficiency as well as enhanced mechanical and photochemical stability in PSCs.Long-term stability tests further confirm the superior durability of EDIA-enhanced devices.This study highlights EDIA as a promising strategy for enhancing the robustness and efficiency of PSCs.
文摘This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a general part covering the grand lines and more in-depth views of more recent tannin,lignin,carbohydrate and soy bioadhesives,somemix of the other bio raw materials with soy protein and soy flour and some other differently sourced bioadhesives for wood,this review presents a more in-depth part on starch-based wood adhesives and a more indepth part covering plant protein-based adhesives.It must be kept in mind that the review is focused on completely or almost completely biosourced adhesives,the fashionable adhesives derived from mixes of biosourced materials with synthetic resins having been intentionally excluded.This choice was made as the latter constitute only an intermediate interval,possibly temporary if even for a somewhat long times,towards a final full bioeconomy of scale in this field.This review also focuses on more recent results,mainly obtained in the last 10–20 years,thus on adhesive formulations really innovative and sometimes even non-traditional.In all these fields there is still a lot of possibility of innovation for relevant formulation as this field is still in rapid growth.
基金supported by the National Natural Science Foundation of China(Nos.22273098,22373003,22103002 and 52033001)the Key Project of Anhui Province Science and Technology Innovation Platform(No.202305a12020030)the financial support from the Anhui Provincial Natural Science Foundation(No.2408085Y004)。
文摘Polymeric materials which can undergo controlled degradation and recycling are of great significance for a sustainable society.Although tremendous progress has been made in the degradation and recycling of both thermoplastic and thermoset plastics,the development of high-performance degradable polymer adhesives is rare.Here,we have prepared high-performance nucleobase-containing thioctic acid-based supramolecular polymer adhesives through free radical polymerization.The specific hydrogen-bonding interactions between complementary nucleobases greatly improve the weak cohesion of the thioctic acid-based polymers and enhance the environmental stability of the thioctic acidbased polymers simultaneously.Degradation of the nucleobase-containing thioctic acid-based supramolecular polymers is achieved by the reduction of the disulfide backbone,and the cycle of degradation and repolymerization is further achieved via oxidative polymerization.The adhesion strength of the nucleobase-containing thioctic acid-based supramolecular polymers after two cycles of degradation and repolymerization still reaches as high as 4.7±0.3 MPa.This work provides an approach for the development of environmentally stable and high-performance degradable thioctic acid-based adhesives.
基金supported by the National Key Research&Development Program of China(grant no.2022YFC3500503)the National Natural Science Foundation of China(grant nos.62227807,12374171,12004034,62402041)+2 种基金the Beijing Institute of Technology Research Fund Program for Young Scholars,Chinathe Fundamental Research Funds for the Central Universities(grant nos.2024CX06060)Beijing Youth Talent Lifting Project.
文摘Due to their high mechanical compliance and excellent biocompatibility,conductive hydrogels exhibit significant potential for applications in flexible electronics.However,as the demand for high sensitivity,superior mechanical properties,and strong adhesion performance continues to grow,many conventional fabrication methods remain complex and costly.Herein,we propose a simple and efficient strategy to construct an entangled network hydrogel through a liquid-metal-induced cross-linking reaction,hydrogel demonstrates outstanding properties,including exceptional stretchability(1643%),high tensile strength(366.54 kPa),toughness(350.2 kJ m^(−3)),and relatively low mechanical hysteresis.The hydrogel exhibits long-term stable reusable adhesion(104 kPa),enabling conformal and stable adhesion to human skin.This capability allows it to effectively capture high-quality epidermal electrophysiological signals with high signal-to-noise ratio(25.2 dB)and low impedance(310 ohms).Furthermore,by integrating advanced machine learning algorithms,achieving an attention classification accuracy of 91.38%,which will significantly impact fields like education,healthcare,and artificial intelligence.
基金supported by Scientific Research Projects of China Association of Metros(CAMET-KY-2022039)State Key Laboratory of Traction and Control System of EMU and Locomotive(2023YJ386).
文摘Purpose–This study aims to propose a cooperative adhesion control method for trains with multiple motors electric locomotives.The method is intended to optimize the output torque of each motor,maximize the utilization of train adhesion within the total torque command,reduce the train skidding/sliding phenomenon and achieve optimal adhesion utilization for each axle,thus realizing the optimal allocation of the multi-motor electric locomotives.Design/methodology/approach–In this study,a model predictive control(MPC)-based cooperative maximum adhesion tracking control method for multi-motor electric locomotives is presented.Firstly,train traction system with multiple motors is constructed in accordance with Newton’s second law.These equations include the train dynamics equations,the axle dynamics equations,and the wheel-rail adhesion coefficient equations.Then,a new MPC-based multi-axle adhesion co-optimization method is put forward.This method calculates the optimal output torque through real-time iteration based on the known reference slip speed to achieve multi-axle co-optimization under different circumstances.Findings–This paper presents a MPC system designed for the cooperative control of multi-axle adhesion.The results indicate that the proposed control system is able to optimize the adhesion of multiple axles under numerous different conditions and achieve the optimal power distribution based on the reduction of train skidding/sliding.Originality/value–This study presents a novel cooperative adhesion tracking control scheme.It is designed for multi-motor electric locomotives,which has rarely been studied before.And simulations are carried out in different conditions,including variable surfaces and motor failing.
基金funded by the Major Research Plan of the National Natural Science Foundation of China(No.92159202)the National Key Research and Development Program of China(No.2021YFA1100500)+1 种基金the Leading Innovation Team Project of Hangzhou Medical College(No.CXLJ202401)the Key Research and Development Plan of Zhejiang Provincial Department of Science and Technology(No.2024C03051)。
文摘Objective:Cytotoxic T lymphocytes(CTLs)play a crucial role in the therapeutic approach to hepatocellular carcinoma(HCC).Recent research has indicated that junctional adhesion molecule-like protein(JAML)enhances the antitumor activity of CD8+T cells.Our study investigates the role of JAML+CD8+T cells in HCC.Methods:We utilized time-of-flight mass cytometry and an orthotopic mouse model of HCC to examine histone modifications in tumor-infiltrating immune cells undergoing immunotherapy.Flow cytometry was used to assess CD4+T cells differentiation and JAML expression in CD8+T cells infiltrating HCC.Correlation analysis revealed a strong positive correlation between lactate dehydrogenase A+(LDHA+)CD4+T cells and JAML+CD8+T cells.Subsequently,we evaluated the therapeutic effects of an agonistic anti-JAML antibody,both alone and combined with immunotherapy.Finally,RNA sequencing was conducted to identify potential regulatory mechanisms.Results:Immunotherapy significantly increased the percentage of CD8+T cells infiltrating HCC and induced histone modifications,such as H3K18 lactylation(H3K18la)in CD4+T cells.Flow cytometry analysis revealed that lactate promotes the differentiation of CD4+T cells into Th1 cells.LDHA,an enzyme that converts pyruvate to lactate,plays a key role in this process.Correlation analysis revealed a strong positive relationship between LDHA+CD4+T cells and JAML+CD8+T cells in patients who responded to immunotherapy.Moreover,high JAML expression in CD8+T cells was associated with a more favorable prognosis.In vivo experiments demonstrated that agonistic anti-JAML antibody therapy reduced tumor volume and significantly prolonged the survival of tumor-bearing mice,independent of the effects of anti-programmed cell death protein ligand-1 antibody(αPD-L1)-mediated immunotherapy.Pathway enrichment analysis further revealed that JAML enhances CTL responses through the oxidative phosphorylation pathway.Conclusions:Activation of JAML enhances CTL responses in HCC treatment,independent ofαPD-L1-mediated immunotherapy,providing a promising strategy for advanced HCC.
基金Supported by the Fundamental Research Program of Shanxi Province,No.202203021222418Research Program of Shanxi Provincial Health Commission,No.2023061+2 种基金Fundamental Research Cooperation Program of Beijing-Tianjin-Hebei Region of Natural Science Foundation of Tianjin,No.22JCZXJC00140Tianjin Major Science and Technology Project,No.21ZXJBSY00110Tianjin Health and Science and Technology Project,No.TJWJ2024ZK001.
文摘BACKGROUND Regulator of G protein signaling(RGS)proteins participate in tumor formation and metastasis by acting on theα-subunit of heterotrimeric G proteins.The speci-fic effect of RGS,particularly RGS4,on the progression of gastric cancer(GC)is not yet clear.AIM To explore the role and underlying mechanisms of action of RGS4 in GC develop-ment.METHODS The prognostic significance of RGS4 in GC was analyzed using bioinformatics based public databases and verified by immunohistochemistry and quantitative polymerase chain reaction in 90 patients with GC.Function assays were employed to assess the carcinogenic impact of RGS4,and the mechanism of its possible influence was detected by western blot analysis.A nude mouse xenograft model was established to study the effects of RGS4 on GC growth in vitro.RESULTS RGS4 was highly expressed in GC tissues compared with matched adjacent normal tissues.Elevated RGS4 expression was correlated with increased tumor-node-metastasis stage,increased tumor grade as well as poorer overall survival in patients with GC.Cell experiments demonstrated that RGS4 knockdown suppressed GC cell proliferation,migration and invasion.Similarly,xenograft experiments confirmed that RGS4 silencing significantly inhibited tumor growth.Moreover,RGS4 knockdown resulted in reduced phosphorylation levels of focal adhesion kinase,phosphatidyl-inositol-3-kinase,and protein kinase B,decreased vimentin and N-cadherin,and elevated E-cadherin.CONCLUSION High RGS4 expression in GC indicates a worse prognosis and RGS4 is a prognostic marker.RGS4 influences tumor progression via the focal adhesion kinase/phosphatidyl-inositol-3-kinase/protein kinase B pathway and epithelial-mesenchymal transition.
基金the National Key R&D Program of China(2022YFA1505200)the National Natural Science Foundation of China(22472140,22021001)the Fundamental Research Funds for the Central Universities(20720210017 and 20720210009)。
文摘Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.
基金funding for this research was provided by Netherlands Ministry of Defence
文摘The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on untangling the underlying impact of varying adhesive cohesive or adhesion properties is limited and sometimes appears to provide conflicting conclusions.Comparison between the available studies is also often difficult due to variations in armour systems or ballistic testing being conducted.This review scrutinises the available research,identifying six critical properties of an adhesive layer in determining ballistic performance:elastic modulus,fracture strain,acoustic impedance,tensile bond strength,shear bond strength,and thickness.The impact of each of these properties on ballistic performance is discussed in detail,with clear description of the underlying processes involved,allowing clear optimisation goals to be established depending on the ceramic armour specification.
基金funded by the“Departments of Excellence”program of the Italian Ministry for University and Research(MIUR,2018-2022 and MUR,2023-2027).
文摘The ability of queens and males of most ant species to disperse by flight has fundamentally contributed to the group’s evolutionary and ecological success and is a determining factor to take into account for biogeographic studies(Wagner and Liebherr 1992;Peeters and Ito 2001;Helms 2018).
基金financial support from the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515012218)Macao Science and Technology Development Fund(Nos.FDCT 0009/2020/AMJ,0027/2023/RIB1)+1 种基金National Natural Science Foundation of China(No.32301104)Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.23ptpy165).
文摘Hydrogel-based flexible sensors are emerging as ideal candidates for wearable devices and soft robotics.However,most current hydrogels possess limited physicochemical properties,which hinder their practical application in long-term and complex scenarios.Herein,inspired by the unique structure of the barnacle,we design multifunctional poly(DMAPA-co-PHEA)hydrogels(CP hydrogels)by employing multiple physical crosslinks in the presence of Ag nanoparticles and NaCl additives.Owing to the synergistic effect of cation-πinteractions,hydrophobic interactions,and ionic bonds,the CP hydrogels exhibit high stretchability(strain up to 1430%),strong adhesion(22.8 kPa),satisfactory antibacterial activity,stable anti-icing ability(<20 kPa after 20 icing-deicing cycles),and high electrical conductivity(18.5 mS/cm).Additionally,the CP hydrogels show fast and sensitive responsiveness and cycling stability and can attach directly to human skin to accurately detect both human motions and tiny physiological signals as a flexible wearable sensor.Collectively,this work significantly contributes a straightforward and efficient design strategy for the development of multifunctional hydrogels,broadening their application scenarios.
基金Funded by the Science and Technology Program Special Fund of Jiangsu Province(Frontier Leading Technology Basic Research)Major Projects(No.BK20222004)the National Natural Science Foundation of China(No.52078241)the New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘This study aims to investigate the failure modes at the interface of semi-flexible pavement(SFP)materials.The cohesive and wetting properties of asphalt materials,as well as two types of grout(early strength cement grout-ELS and high strength cement grout-CHS),were evaluated through pull-out tests and contact angle experiments.The rheological properties of the grout/asphalt mortar were assessed using dynamic shear rheometer(DSR)testing.The interaction coefficient,complex shear modulus,and complex viscosity coefficients of the grout/asphalt mortar were calculated to analyze the interaction between the grout and asphalt.Failure modes were identified through image analysis of semi-circular bending test(SCB)specimens.Results indicate that ELS specimens exhibit a lower grout/asphalt interface failure ratio compared to CHS specimens,due to the superior wettability and interaction of ELS grout.As the temperature increases,the proportions of cement fracture and aggregate failure decrease,while the proportion of asphalt cohesive failure surfaces increases.Furthermore,the bonding strength of SBS-modified asphalt with the grout exceeds that of pure asphalt.
基金the financial supports of Fundamental Research Funds for the Central Universities,China(Nos.YWF-23-L-1012,YWF-22-L-1017)。
文摘The limited metal-polymer interlaminar property is a significant obstacle to the advancement of Ti/Carbon Fiber(CF)/Polyether Ether Ketone(PEEK)hybrid laminates.We report for the first time a novel method by utilizing the mussel-inspired Polydopamine(PDA)to introduce a strong chemical-physical bonding between titanium and PEEK.The enhanced Fiber-Metal Laminate(FML)exhibits a significant 48.82%enhancement in Interlaminar Shear Strength(ILSS).In addition,it alters the failure mode of the FML from single metal-resin interlaminar delamination to a multi-mechanism,including debonding,delamination of different composite layers,leading to a 28.57%improvement in maximum displacement.
基金supported by the National Research Foundation(NRF)of Korea,funded by the Korean Government(MSIT)(Grant No.RS-2023-00240043).
文摘As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(HKL)is limited due to its poor crosslinking reactivity.Hence,for the first time,the present study reports the facile oxidation of HKL involving a redox reaction with silver-ammonia complexes([(AgNH3)2]+),primarily focusing on oxidation to produce reactive quinones and promote C-C linkages during reaction.This study aims to increases reactivity of oxidized HKL for effective crosslinking with monoethanolamine(MEA)for the development of bio-based wood adhesives.The characterization,including 13C-nuclear magnetic resonance(NMR)and Fourier transform infrared(FT-IR)spectroscopy,confirms the oxidation reaction,such as the formation of quinones(C=O)and subsequent crosslinking between the oxidized HKL molecules and MEA.Additionally,gel permeation chromatography(GPC)confirms the C-C and C-O linkages with increased molecular weight after oxidation,and is supported by differential scanning calorimetry(DSC)which shows the exothermic reaction due to the crosslinking of the oxidized HKL molecules via condensation to form C-C and C-O linkages.The crosslinked HKL/MEA-based adhesives underwent mild reaction and achieved a maximum dry shear strength of 0.77 MPa,which exceeds the standard requirement of 0.6 MPa.These findings demonstrate not only a one-pot oxidation for improving the reactivity of HKL using silver complexes,but also its facile crosslinking with MEA for sustainable bio-based wood adhesives.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2022MB034)。
文摘The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing adhesives(ESOx-FPF)were designed and synthesized by crosslinking two prepolymers,FPF-B(derived from side-chain fluorinated diol,isocyanate,and aminoboric acid)and ESO-B(synthesized from biobased epoxy soybean oil and aminoboric acid),through dynamic boro-oxygen bonds.The resulting adhesive exhibited an optimal tensile strength of 42 MPa and the shear strength on steel plates reached as high as 3.89 MPa.More importantly,benefiting from the dynamic reversibility of the boron-oxygen bonds along with the hydrogen bonds interaction,ESOx-FPF can be welded with the assistance of solvents and recycled for multiple cycles.The outstanding healing efficiency and excellent reprocessability of these functional adhesives were confirmed by mechanical testing.Moreover,the as-prepared adhesives demonstrated universal and remarkable adhesion to various substrates,such as aromatic polyamide,aluminum plates and polycarbonate,meanwhile,they could be easily disassembled and recycled using ethanol without damaging the substrates surface.This study not only provides a simple strategy for the synthesis of eco-friendly adhesives with weldable and recyclable properties,but also sheds light on the development of other functional materials utilizing dynamic covalent chemistry.
基金supported by the National Natural Science Foundation(52025055,52175546,and 52405624)the Shaanxi University Youth Innovation Team.
文摘Gecko-inspired van der Waals force-based adhesion technology demonstrates significant potential for robotic operations.While superior adhesion is achieved under parallel contact during testing,engineering operations often involve non-parallel contact,weakening adhesion,and compromising task stability and efficiency.Stable attachment under such non-parallel contacts remains challenging.Inspired by the soft muscle and rigid bone in the gecko’s sole,this study proposes a self-adaptive core-shell dry adhesive by embedding a thin,rigid piece into a soft,thick elastomer comprising a top adhesion tip with a mushroom-like geometry for interfacial adhesion based on the van der Waals force and a bottom core-shell configuration for interface stress regulation.Unlike traditional core-shell structures with a fixed“dead core,”the proposed“live core”rotates within the soft shell,mimicking skeletal joints.This enables stress equalization at the interface and facilitates adaptive contact to macroscopic interfacial angle errors.This innovative core-shell configuration demonstrates an adhesion strength 100 times higher than conventional homogeneous structures under non-parallel contact and offers anti-overturning ability by mitigating torsional effects.The proposed strategy can advance the development of gecko-inspired adhesion-based devices and systems.
文摘Background:Postoperative complications,particularly those involving lymphatic drainage,remain a significantchallenge for patients undergoing axillary lymphadenectomy(ALND)as part of breast cancer surgery.Thesecomplications can delay the initiation of adjuvant therapies,increase healthcare costs,and negatively affectpatients’quality of life.This study evaluated the use of a latex-based tissue adhesive(LTA)as an intraoperativestrategy to prevent seroma formation and prolonged lymphorrhea following axillary dissection.Methods:In this prospective study,65 female patients diagnosed with stage Ⅱb-Ⅲ breast cancer and clinicallyconfirmed axillary lymph node involvement were enrolled.Participants were divided into two groups.The studygroup(n=33)received an intraoperative application of LTA without drainage,while the control group(n=32)underwent standard ALND with placement of a silicone vacuum drain.Postoperative outcomes assessed includedlymphatic drainage volume,number of aspirations,duration of lymphorrhea,length of hospital stay,and incidence of complications.Results:Use of the LTA significantly reduced both the volume and duration of postoperative lymphorrhea.Bypostoperative day 10,the average wound exudate volume in the LTA group was 8.2±3.3 mL,compared to54.1±3.9 mL in the control group—an 84.8%reduction.The LTA group also experienced shorter hospital staysand fewer cases of postoperative seroma requiring intervention.Conclusion:LTA appears to be a safe,effective,and practical intraoperative technique for preventing lymphaticcomplications after ALND.Its use may reduce dependence on drainage systems,shorten hospitalization,andsupport earlier initiation of adjuvant therapies,ultimately improving surgical outcomes and patient recovery.
基金supported by the Sakarya University of Applied Sciences-Scientific Research Projects Coordination in the scope of master’s thesis Project under project number 285–2025.
文摘Purpose–This study examines the effect of increased surface energy on adhesion strength.Surface modifications were made using chemical coating methods such as primer paint(primer)and cataphoresis(KTL,Kathodische Tauchlackierung).The wetting behaviour of adhesive on these surfaces and the resulting contact angles were analysed to evaluate bonding effectiveness.Design/methodology/approach–Primer paint was applied to glass fibre reinforced plastic(GFRP)materials and cataphoresis coating was applied to steel.Contact angles of the coated surfaces were measured and compared to those of the uncoated(natural)surfaces.Findings–Results showed that applying primer to GFRP and KTL to steel increased their surface energy compared to untreated surfaces.A decrease in contact angle correlated with improved wetting,suggesting enhanced adhesion potential.Originality/value–While the effects of surface coatings on adhesion have been studied,there is limited research specifically on the adhesion-enhancing potential of KTL coatings.Typically used for corrosion resistance,KTL is shown here to also improve adhesion.The novelty lies in experimentally demonstrating KTL’s dual role as both a protective and adhesion-enhancing layer.
