Electrochemical conversion of nitrate(NO_(3)~-) to ammonia(NH_(3)) can target two birds with one stone well, in NO_(3)^(-)-containing sewage remediation and sustainable NH_(3) production. However, single metalbased ca...Electrochemical conversion of nitrate(NO_(3)~-) to ammonia(NH_(3)) can target two birds with one stone well, in NO_(3)^(-)-containing sewage remediation and sustainable NH_(3) production. However, single metalbased catalysts are difficult to drive high-efficient NO_(3)~- removal due to the multi-electron transfer steps.Herein, we present a tandem catalyst with simple structure, Cu-Co binary metal oxides(Cu-Co-O), by engineering intermediate phases as catalytic active species for NO_(3)~- conversion. Electrochemical evaluation,X-ray photoelectron spectroscopy, and in situ Raman spectra together suggest that the newly-generated Cu-based phases was prone to NO_(3)~- to NO_(2)~- conversion, then NO_(2)~- was reduced to NH_(3) on Co-based species. At an applied potential of -1.1 V vs. saturated calomel electrode, the Cu-Co-O catalyst achieved NO_(3)~- -N removal of 90% and NH_(3) faradaic efficiency of 81% for 120 min in 100 m L of 50 mg/L NO_(3)~- -N,consuming only 0.69 k Wh/mol in a two-electrode system. This study provides a facile and efficient engineering strategy for developing high-performance catalysts for electrocatalytic nitrate conversion.展开更多
The influence of the distorted plane of the active phased array antenna on the electromagnetic performance is of great significance to the research on and development of the high-performance antennas. On the bent and ...The influence of the distorted plane of the active phased array antenna on the electromagnetic performance is of great significance to the research on and development of the high-performance antennas. On the bent and bowl-shape distortion, the model is established of the relationship between the electromagnetic performance and the position error of the radiated elements. The method is presented of analyzing the far-field pattern of the distorted rectangular active phased array antenna. The analysis results of a planar phased array antenna with different distortions grades prove the validity of the model. Therefore, by the method, the antenna designers may set the reasonable requirement on the structural tolerance in manufacturing antenna.展开更多
Methanol synthesis from CO_(2)hydrogenation catalyzed by Zn/Cu alloy has been widely studied,but there is still debate on its catalytic active phase and whether the Zn can be oxidized during the reaction process.What ...Methanol synthesis from CO_(2)hydrogenation catalyzed by Zn/Cu alloy has been widely studied,but there is still debate on its catalytic active phase and whether the Zn can be oxidized during the reaction process.What is more,as Zn atoms could locate on Zn/Cu alloy surface in forms of both single atom and cluster,how Zn surface distribution affects catalytic activity is still not clear.In this work,we performed a systematic theoretical study to compare the mechanistic natures and catalytic pathways between Zn single atom and small cluster on catalyst surface,where the surface oxidation was shown to play the critical role.Before surface oxidation,the Zn single atom/Cu is more active than the Zn small cluster/Cu,but its surface oxidation is difficult to take place.Instead,after the easy surface oxidation by CO_(2)decomposition,the oxidized Zn small cluster/Cu becomes much more active,which even exceeds the hardlyoxidized Zn single atom/Cu to become the active phase.Further analyses show this dramatic promotion of surface oxidation can be ascribed to the following factors:i)The O from surface oxidation could preferably occupy the strongest binding sites on the center of Zn cluster.That makes the O intermediates bind at the Zn/Cu interface,preventing their too tight binding for further hydrogenation;ii)The higher positive charge and work function on the oxidized surface could also promote the hydrogenation of O intermediates.This work provided one more example that under certain condition,the metal cluster can be more active than the single atom in heterogeneous catalysis.展开更多
A series of Co-based oxide catalysts were prepared by calcining hydrotalcite precursors in different atmospheres and studied for HCHO catalytic oxidation. The N2-calcined catalyst exhibits enhanced HCHO oxidation and ...A series of Co-based oxide catalysts were prepared by calcining hydrotalcite precursors in different atmospheres and studied for HCHO catalytic oxidation. The N2-calcined catalyst exhibits enhanced HCHO oxidation and superior stability. On the basis of H2-TPR, X-ray photoelectron spectroscopy, and Raman characterizations, this can be ascribed to better redox ability, octahedrally coordinated Co2+ ions derived from the CoO phase, and other surface oxygen species, such as O2– or O–. The extra octahedrally coordinated Co2+ ions may reside in a more open framework site than the inactive tetrahedrally coordinated Co2+ ions. This species of Co2+ can easily make contact with oxygen and oxidize. The surface oxygen species, along with the octahedrally coordinated Co2+ ions, and a part of the Co3+ species constitute the Co2+-oxygen species-Co3+ sites, which enhance the catalytic activities. According to DRIFTS, Co2+-oxygen species-Co3+ makes oxidation of HCHO and conversion of DOM to formate easier.展开更多
To gain the tradeoff between lower sidelobe and higher power amplifiers efficiency,a transmitting beam shaping scheme with limited amplitude weight values for satellite active phased array antenna is presented. The sc...To gain the tradeoff between lower sidelobe and higher power amplifiers efficiency,a transmitting beam shaping scheme with limited amplitude weight values for satellite active phased array antenna is presented. The scheme is implemented by a dual coding genetic algorithm(GA). Phase and amplitude of array weight vectors for beam shaping are encoded by real coding and finite length binary coding,respectively,which,maintaining accuracy of results,reduces the amplitude dynamic range and improves the efficiency of power amplifiers. The presented algorithm,compared with complex-coded GA,increases the convergence rate due to the search space's decrease. In order to overcome the prematurity and obtain better global optimization or quasi-global optimization,a new dual coding GA based on "species diversity retention" strategy and adaptive crossover and mutation probability are presented.展开更多
Molecular mechanics and quantum mechanics simulations, as molecular simulation methods, were performed to investigate the effects of different surfaces, the promoter Co/Ni, the active phase of MoS2 or WS2, the content...Molecular mechanics and quantum mechanics simulations, as molecular simulation methods, were performed to investigate the effects of different surfaces, the promoter Co/Ni, the active phase of MoS2 or WS2, the content of Si and other factors on the order of interaction between the MoS2 （WS2） single slab and the support surface. The influence of Si content was studied by molecular mechanics, and an advantageous Si content was found. Various surfaces, promoters and active phases also played an important role in the interaction between the support surfaces and active phases, and some significant trends were found out. Quantum mechanics simulation was performed to study the possible effect of electrostatic interaction between the support and the active phase, upon which the calculations suggested that the existence of a favorable Si content was possible. The electronic effects of Co/Ni promoter and the intensity of Co/Mo/Ni/W/Li/AI/Si species bonded to the alumina support were also investigated by quantum mechanics, and it was found that the different electronic effects of Co and Ni might bring forth some obvious influences on the interaction between the support and the active phase. And the results of comparing the intensity of Co/Mo/Ni/W/Li/AI/Si species bonded to the support can also explain the different interaction intensity in various catalyst systems.展开更多
Two-dimensional elec tronic spec troscopy(2DES)is a powerful met hod to probe the coherent electron dynamics in complicated systems.Stabilizing the phase difference of the incident ultrashort pulses is the mos t chall...Two-dimensional elec tronic spec troscopy(2DES)is a powerful met hod to probe the coherent electron dynamics in complicated systems.Stabilizing the phase difference of the incident ultrashort pulses is the mos t challenging par t for experimen tal demonstration of 2DES.Here,we present a tuto rial review on the 2DES proto cols based on active phase managements which are originally developed for quantum optics experiments.We introduce the 2DES techniques in box and pump-probe geometries with phase stabilization realized by interferometry,and outline the fully collinear 2DES approach with the frequency tagging by acoustic optical modulators and frequency combs.The combination of active phase managements,ultrashort pulses and other spectroscopic methods may open new opportunities to tackle essential challenges related to excited states.展开更多
Active-phase engineering is regularly utilized to tune the selectivity of metal nanoparticles （NPs） in heterogeneous catalysis. However, the lack of understanding of the active phase in electrocatalysis has hampered...Active-phase engineering is regularly utilized to tune the selectivity of metal nanoparticles （NPs） in heterogeneous catalysis. However, the lack of understanding of the active phase in electrocatalysis has hampered the development of efficient catalysts for CO2 electroreduction. Herein, we report the systematic engineering of active phases of Pd NPs, which are exploited to select reaction pathways for CO2 electroreduction. In situ X-ray absorption spectroscopy, in situ attenuated total reflection-infrared spectroscopy, and density functional theory calculations suggest that the formation of a hydrogen-adsorbed Pd surface on a mixture of the α- and β-phases of a palladium-hydride core （α＋β PdHx@PdHx） above -0.2 V （vs. a reversible hydrogen electrode） facilitates formate production via the HCOO intermediate, whereas the formation of a metallic Pd surface on the β-phase Pd hydride core （β PdHx@Pd） below -0.5 V promotes CO production via the COOH＂ intermediate. The main product, which is either formate or CO, can be selectively produced with high Faradaic efficiencies （〉90%） and mass activities in the potential window of 0.05 to -0.9 V with scalable application demonstration.展开更多
Despite the extensive study of the Fe-based Fischer-Tropsch synthesis(FTS)over the past 90 years,its active phases and reaction mechanisms are still unclear due to the coexistence of metals,oxides,and carbide phases p...Despite the extensive study of the Fe-based Fischer-Tropsch synthesis(FTS)over the past 90 years,its active phases and reaction mechanisms are still unclear due to the coexistence of metals,oxides,and carbide phases presented under realistic FTS reaction conditions and the complex reaction network involving CO activation,C-C coupling,and methane formation.To address these issues,we successfully synthesized a range of pure-phase iron and iron-carbide nanoparticles(Fe,Fe_(5)C_(2),Fe_(3)C,and Fe_(7)C_(3))for the first time.By using them as the ideal model catalysts on high-pressure transient experiments,we identified unambiguously that all the iron carbides are catalytically active in the FTS reaction while Fe_(5)C_(2) is the most active yet stable carbide phase,consistent with density functional theory(DFT)calculation results.The reaction mechanism and kinetics of Fe-based FTS were further explored on the basis of those model catalysts by means of transient high-pressure stepwise temperature-programmed surface reaction(STPSR)experiments and DFT calculations.Our work provides new insights into the active phase of iron carbides and corresponding FTS reaction mechanism,which is essential for better iron-based catalyst design for FTS reactions.展开更多
The present study investigates the active phases and the role of oxygen species in the toluene oxidation process over CuCeZrO_(x) catalysts prepared with bacterial cellulose(BC),and compares them with nitric acid pick...The present study investigates the active phases and the role of oxygen species in the toluene oxidation process over CuCeZrO_(x) catalysts prepared with bacterial cellulose(BC),and compares them with nitric acid pickling CuCeZrO_(x)-BC(H)and CeZrO_(x)-BC catalysts.The investigation is carried out using in-situ DRIFT,O_(2)-TPD,H_(2)-TPR,XRD,and TEM techniques.Our findings suggest that dispersed CuO species on the catalyst surface,Cu-Ce-Zr-O,and Ce-Zr-O solid solutions are active for toluene oxidation over CuCeZrO_(x)-BC,with corresponding activities decreasing successively.The in-situ DRIFT results demonstrate that gaseous oxygen facilitates the chemisorption of toluene on active oxygen species,forming benzoyl oxide species and partially oxidizing the absorbed intermediates to benzyl alcohol at room temperature.Furthermore,lattice oxygen is experimentally found to be involved in the deep oxidation of toluene,and the lattice oxygen present in dispersed CuO species dominates the toluene oxidation process over CuCeZrO_(x)-BC.展开更多
Electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to ethylene(C_(2)H_(4))represents a promising approach to reducing CO_(2)emissions and producing high-value chemicals.The ethylene productivity is always limited by t...Electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to ethylene(C_(2)H_(4))represents a promising approach to reducing CO_(2)emissions and producing high-value chemicals.The ethylene productivity is always limited by the slow reaction kinetics and the high-performance catalysts are significantly desired.Many efforts have been made to develop a catalyst to activate CO_(2)molecules.However,as another reactant,H2O activation does not receive the attention it deserves.In particular,slow H2O dissociation kinetics limit the rate of proton supply,severely impairing the production of C_(2)H_(4).Here,we designed a MgO-modified CuO catalyst(MgO/CuO),which can promote H2O dissociation and enhance CO_(2)adsorption at the same time to realize the efficient ethylene production.The optimal catalyst exhibits a Faraday efficiency for C_(2)H_(4)reached 54.4%at−1.4 V vs.RHE in an H-cell,which is 1.4 times that of pure CuO(37.9%),and it was further enhanced to a 56.7%in a flow cell,with a high current density of up to 535.9 mA cm−2 at−1.0 V vs.RHE.Experimental and theoretical calculations show that MgO/CuO plays a bifunctional role in the CO_(2)RR,which facilitates the adsorption and activation of CO_(2)by CuO and simultaneously accelerates H2O dissociation by MgO doping.The in situ XRD experiments demonstrate that the introduction of MgO protects CuO active phase to avoid overreduction and preserves the active centers for CO_(2)RR.In combination with in situ FTIR and DFT calculations,the protonation process from*CO to*COH and asymmetric C–C coupling step are promoted by the enhanced water activation and proton coupling on MgO/CuO.This work provides new insights into the CO_(2)and H_(2)O coactivation mechanism in CO_(2)RR and a potential universal strategy to design ethylene production electrocatalysts.展开更多
Fe-based catalysts are widely used for CO_(2)hydrogenation to light olefins(C_(2–4)=);however,precise regulation of active phases and the balance between intermediate reactions remain significant challenges.Herein,we...Fe-based catalysts are widely used for CO_(2)hydrogenation to light olefins(C_(2–4)=);however,precise regulation of active phases and the balance between intermediate reactions remain significant challenges.Herein,we find that the addition of moderate amounts of Ti forms a strong interaction with Fe compositions,modulating the Fe_(3)O_(4)and Fe_(5)C_(2)contents.Enhanced interaction leads to an increased Fe_(5)C_(2)/Fe_(3)O_(4)ratio,which in turn enhances the adsorption of reactants and intermediates,promoting CO hydrogenation to unsaturated alkyl groups and facilitating C–C coupling.Furthermore,the strong Fe-Ti interaction induces the preferential growth of Fe_(5)C_(2)into prismatic structures that expose the(020),(–112),and(311)facets,forming compact active interfacial sites with Fe_(3)O_(4)nanoparticles.These facet and interfacial effects significantly promote the synergistic coupling of the reverse water gas shift and Fischer-Tropsch reactions.The optimized 3K/FeTi catalyst with the highest Fe_(5)C_(2)/Fe_(3)O_(4)ratio of 3.6 achieves a 52.2%CO_(2)conversion rate,with 44.5%selectivity for C2–4=and 9.5%for CO,and the highest space-time yield of 412.0 mg gcat^(–1)h^(–1)for C_(2–4)=.展开更多
Revealing the active species of the catalyst is conducive to the design of more efficient catalyst.Herein,we tried to demonstrate the roles of amorphous and crystalline structures on CePO_(4)catalyst during selective ...Revealing the active species of the catalyst is conducive to the design of more efficient catalyst.Herein,we tried to demonstrate the roles of amorphous and crystalline structures on CePO_(4)catalyst during selective catalytic reduction(SCR)of NO_(x)by NH_(3).Higher calcination temperature promotes the transfer of amorphous structure to crystalline structure on the surface of CePO_(4).Both amorphous and crystalline CePO_(4)species on CePO-X samples can provide acid sites for NH_(3)adsorption,but the former can provide more acid sites.The superior redox property of surface amorphous CePO_(4)species contributes to its high NH_(3)-SCR activity at low temperature,but it also leads to the decrease of high temperature(>350℃)NH_(3)-SCR activity due to the oxidation of NH_(3).In contrast,crystalline CePO_(4)species shows high activity only at high temperature because of its poor redox property.Therefo re,it can be inferred that amo rphous and crystalline structures on CePO_(4)catalyst can be the efficient active species of NH_(3)-SCR at low and high temperature,respectively.展开更多
The effect of potassium-decoration was studied on the activity of water-gas shift （WGS） reaction over the Co-Mo-based catalysts supported on active carbon （AC）, which was prepared by incipient wetness co-impregnat...The effect of potassium-decoration was studied on the activity of water-gas shift （WGS） reaction over the Co-Mo-based catalysts supported on active carbon （AC）, which was prepared by incipient wetness co-impregnation method. The decoration of potassium on active carbon in advance enhances the activities of the CoMo-K/AC catalysts for WGS reaction. Highest activity （about 92% conversion） was obtained at 250 ？ C for the catalyst with an optimum K 2 O/AC weight ratio in the range from 0.12 to 0.15. The catalysts were characterized by TPR and EPR, and the results show that activated carbon decorated with potassium makes Co-Mo species highly dispersed, and thus easily reduced and sulfurized. XRD results show that an appropriate content of potassium-decoration on active carbon supports may favors the formation of highly dispersed Co 9 S 8 -type structures which are situated on the edge or a site in contact with MoS 2 , K-Mo-O-S, Mo-S-K phase. Those active species are responsible for the high activity of CoMo-K/AC catalysts.展开更多
The reduction of titanomagnetite（TTM） ironsand, which contains 11.41wt% TiO_2 and 55.63wt% total Fe, by graphite was performed using a thermogravimetric analysis system under an argon gas atmosphere at 1423–1623 K....The reduction of titanomagnetite（TTM） ironsand, which contains 11.41wt% TiO_2 and 55.63wt% total Fe, by graphite was performed using a thermogravimetric analysis system under an argon gas atmosphere at 1423–1623 K. The behavior and effects of titanium in TTM ironsand during the reduction process were investigated by means of thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. During the reduction procedure, the titanium concentrated in the slag phase, where the phase transformation followed this sequence： Fe O ＋ FeTiO_3 → Fe_2 TiO_4 → FeTiO_3 → FeTi_2O_5 → TiO_2. The calculated results for the reduction kinetics showed that the carbothermic reduction was controlled by the diffusion of ions through the product layer. Furthermore, the apparent activation energy was 170.35 k J·mol^（-1）.展开更多
Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employe...Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employed. During the DSC runs, heating and cooling rates of 1, 3, 10, and 20 °C·min^(-1) were applied to investigate the heating and cooling effects on dissolution of secondary eutectic phases and microstructure evolution. Various reactions corresponding to troughs and peaks of the DSC curves were identified as corresponding to phase transformations taking place during dissolution or precipitation suggested by the principles of thermodynamics and kinetics. The comparison of the identified characteristic temperatures in the measured heating and cooling curves are generally in good agreement with the computed equilibrium temperatures. The microstructure analyses by scanning electron microscopy(SEM) with energy dispersive X-ray spectroscopy(EDS) indicate that the distribution and morphology of secondary phases present in the microstructure of the annealed sample are similar to the as-cast A380, i.e., strip β(Si), buck bone like or dot distributed θ(Al_2Cu), β(Al_5Fe Si) and Al_(15)(FeMn)_3Si_2. Two kinetic methods are employed to calculate the activation energies of the three common troughs and three common peaks in DSC curves of SC A380. The activation energies of the identified reaction θ_(CuAl_2) = α(Al)+β(Si) is 188.7 and 187.1 k J?mol^(-1) when the activation energies of reaction α(Al)+β(Si)→θCu Al_2 is^(-1)22.7 and^(-1)21.8 k J?mol^(-1), by the Kissinger and Starink methods, respectively.展开更多
CuCl-based catalysts are the most commonly used catalysts for the“direct synthesis”of trimethoxysilane(M3).CuCl species are sensitive to air and water,and are prone to oxidation deactivation.When CuCl is directly us...CuCl-based catalysts are the most commonly used catalysts for the“direct synthesis”of trimethoxysilane(M3).CuCl species are sensitive to air and water,and are prone to oxidation deactivation.When CuCl is directly used as a catalyst,it needs to be purified before the utilization,and the operating conditions for the catalyst preparation are relatively harsh,requiring the inert gas environment.Considering a high-temperature activation step required for CuCl-based catalysts used for catalyzing synthesis of M3 to form active phase Cu–Si alloys(Cu_(x)Si)with Si powder,in this work,a series of catalysts for the“direct synthesis”of M3 were obtained by a one-step high-temperature activation of the mixture of stable CuCl_(2) precursors,activated carbon-reducing agent,and Si powder,simultaneously achieving the reduction of CuCl_(2) to CuCl and the formation of active phase Cu_(x)Si alloys of CuCl with Si powder.The prepared samples were characterized through various characterization techniques,and investigated for the catalytic performance for the“direct synthesis”of M3.Moreover,the operation conditions were optimized,including the activation temperature,catalyst dosage,Si powder particle size,and reaction temperature.The characterization results indicate that during the one-step activation process,the CuCl_(2) precursor is reduced to CuCl,and the resulting CuCl simultaneously reacts with Si powder to form active phases Cu3Si and Cu15Si4 alloys.The optimal catalyst Sacm(250,0.8:10)exhibits a good catalytic activity with selectivity of 95%and yield of 77%for M3,and shows a good universality for various alcohol substrates.Furthermore,the catalytic mechanism of the prepared catalyst for the“direct synthesis”of M3 was discussed.展开更多
This study presents active coherent beam combining(CBC)of a pulsed laser based on sampling the intrapulse evaluation function.By precisely controlling the trigger sequence of an analog-to-digital converter,the fixed t...This study presents active coherent beam combining(CBC)of a pulsed laser based on sampling the intrapulse evaluation function.By precisely controlling the trigger sequence of an analog-to-digital converter,the fixed time point of the pulse light is sampled as an evaluation function for CBC.The active CBC of two fiber amplifiers with a 500 ns pulse width and a 10 k Hz repetition rate is experimentally demonstrated by applying a hill-climbing algorithm.The residual phase error is approximately λ/27.A coherent Doppler wind lidar(CDWL)based on CBC light source is verified.The experimental results verify the feasibility of using the pulsed CBC to improve the pulse energy of a CDWL without degrading performance.展开更多
Catalytic conversion of synthesis gas （CO＋H2） into hydrocarbons, also known as Fischer-Tropsch （FT） synthesis, is a crucial reaction for the translbrmation of non-petroleum carbon resources such as coal, natural ...Catalytic conversion of synthesis gas （CO＋H2） into hydrocarbons, also known as Fischer-Tropsch （FT） synthesis, is a crucial reaction for the translbrmation of non-petroleum carbon resources such as coal, natural gas, shale gas, coal-bed gas and biogas, as well as biomass into liquid fuels and chemicals. Many factors can influence the catalytic behavior of a FT catalyst. This review highlights recent advances in understanding some key catalyst factors, including the chemical state of active phases, the promoters, the size and the microenvironment of active phase, which determine the CO conversion activity and the product selectivity, particularly the selectivity to C5 ＋ hydrocarbons.展开更多
The widespread utilization of fossil fuels has caused an associated increase in CO_(2) emissions over the past few decades,which has resulted in global warming and ocean acidification.CO hydrogenation(Fischer‐Tropsch...The widespread utilization of fossil fuels has caused an associated increase in CO_(2) emissions over the past few decades,which has resulted in global warming and ocean acidification.CO hydrogenation(Fischer‐Tropsch synthesis,FTS)is considered a significant route for the production of liquid fuels and chemicals from nonpetroleum sources to meet worldwide demand.Conversion of CO_(2) with renewable H_(2) into valuable hydrocarbons is beneficial for reducing dependence on fossil fuels and mitigating the negative effects of high CO_(2) concentrations in the atmosphere.Iron‐based catalysts exhibit superior catalytic performance in both FTS and CO_(2) hydrogenation to value‐added hydrocarbons.The abundance and low cost of iron‐based catalysts also promote their wide application in CO_(x) hydrogenation.This paper provides a comprehensive overview of the significant developments in the application of iron‐based catalysts in these two fields.The active phases,promoter effect,and support of iron‐based catalysts are discussed in the present paper.Based on understanding of these three essential aspects,we also cover recent advances in the design and preparation of novel iron‐based catalysts for FTS and CO_(2) hydrogenation.Current challenges and future catalytic applications are also outlined.展开更多
基金supported by National Natural Science Foundation of China (Nos.52131003 and 42007180)Special Research Assistant Program of Chinese Academy of Science, Natural Science Foundation of Chongqing (No.cstc2020jcyj-msxm X0775)+1 种基金Scientific Research Instrument Development Project of Chinese Academy of Sciences (No.YJKYYQ20200044)Outstanding Scientist of Chongqing Talent Program (No.CQYC20210101288)。
文摘Electrochemical conversion of nitrate(NO_(3)~-) to ammonia(NH_(3)) can target two birds with one stone well, in NO_(3)^(-)-containing sewage remediation and sustainable NH_(3) production. However, single metalbased catalysts are difficult to drive high-efficient NO_(3)~- removal due to the multi-electron transfer steps.Herein, we present a tandem catalyst with simple structure, Cu-Co binary metal oxides(Cu-Co-O), by engineering intermediate phases as catalytic active species for NO_(3)~- conversion. Electrochemical evaluation,X-ray photoelectron spectroscopy, and in situ Raman spectra together suggest that the newly-generated Cu-based phases was prone to NO_(3)~- to NO_(2)~- conversion, then NO_(2)~- was reduced to NH_(3) on Co-based species. At an applied potential of -1.1 V vs. saturated calomel electrode, the Cu-Co-O catalyst achieved NO_(3)~- -N removal of 90% and NH_(3) faradaic efficiency of 81% for 120 min in 100 m L of 50 mg/L NO_(3)~- -N,consuming only 0.69 k Wh/mol in a two-electrode system. This study provides a facile and efficient engineering strategy for developing high-performance catalysts for electrocatalytic nitrate conversion.
基金supported partly by the National Natural Science Foundation of China(50805111)the Natural Science Basic Research Plan in Shaanxi Province of China(SJ08E_203.)
文摘The influence of the distorted plane of the active phased array antenna on the electromagnetic performance is of great significance to the research on and development of the high-performance antennas. On the bent and bowl-shape distortion, the model is established of the relationship between the electromagnetic performance and the position error of the radiated elements. The method is presented of analyzing the far-field pattern of the distorted rectangular active phased array antenna. The analysis results of a planar phased array antenna with different distortions grades prove the validity of the model. Therefore, by the method, the antenna designers may set the reasonable requirement on the structural tolerance in manufacturing antenna.
基金financially supported by the NSFC,China(No.22022504)the Guangdong“Pearl River”Talent Plan,China(No.2019QN01L353)+3 种基金the Higher Education Innovation Strong School Project of Guangdong Province of China,China(2020KTSCX122)the Guangdong Provincial Key Laboratory of Catalysis,China(No.2020B121201002)support from the Center for Computational Science and Engineering at SUSTechfinancial support by the National Key Research and Development Program of China,China(No.2017YFC0210905)。
文摘Methanol synthesis from CO_(2)hydrogenation catalyzed by Zn/Cu alloy has been widely studied,but there is still debate on its catalytic active phase and whether the Zn can be oxidized during the reaction process.What is more,as Zn atoms could locate on Zn/Cu alloy surface in forms of both single atom and cluster,how Zn surface distribution affects catalytic activity is still not clear.In this work,we performed a systematic theoretical study to compare the mechanistic natures and catalytic pathways between Zn single atom and small cluster on catalyst surface,where the surface oxidation was shown to play the critical role.Before surface oxidation,the Zn single atom/Cu is more active than the Zn small cluster/Cu,but its surface oxidation is difficult to take place.Instead,after the easy surface oxidation by CO_(2)decomposition,the oxidized Zn small cluster/Cu becomes much more active,which even exceeds the hardlyoxidized Zn single atom/Cu to become the active phase.Further analyses show this dramatic promotion of surface oxidation can be ascribed to the following factors:i)The O from surface oxidation could preferably occupy the strongest binding sites on the center of Zn cluster.That makes the O intermediates bind at the Zn/Cu interface,preventing their too tight binding for further hydrogenation;ii)The higher positive charge and work function on the oxidized surface could also promote the hydrogenation of O intermediates.This work provided one more example that under certain condition,the metal cluster can be more active than the single atom in heterogeneous catalysis.
基金support by the National Natural Science Foundation of China(91544227,21777166)the National Key R&D Program of China(2016YFC0202202)~~
文摘A series of Co-based oxide catalysts were prepared by calcining hydrotalcite precursors in different atmospheres and studied for HCHO catalytic oxidation. The N2-calcined catalyst exhibits enhanced HCHO oxidation and superior stability. On the basis of H2-TPR, X-ray photoelectron spectroscopy, and Raman characterizations, this can be ascribed to better redox ability, octahedrally coordinated Co2+ ions derived from the CoO phase, and other surface oxygen species, such as O2– or O–. The extra octahedrally coordinated Co2+ ions may reside in a more open framework site than the inactive tetrahedrally coordinated Co2+ ions. This species of Co2+ can easily make contact with oxygen and oxidize. The surface oxygen species, along with the octahedrally coordinated Co2+ ions, and a part of the Co3+ species constitute the Co2+-oxygen species-Co3+ sites, which enhance the catalytic activities. According to DRIFTS, Co2+-oxygen species-Co3+ makes oxidation of HCHO and conversion of DOM to formate easier.
基金The project supported by National Natural Science Foundation of China (No. 60572095)Research Foundation for Doctors of ZZULI
文摘To gain the tradeoff between lower sidelobe and higher power amplifiers efficiency,a transmitting beam shaping scheme with limited amplitude weight values for satellite active phased array antenna is presented. The scheme is implemented by a dual coding genetic algorithm(GA). Phase and amplitude of array weight vectors for beam shaping are encoded by real coding and finite length binary coding,respectively,which,maintaining accuracy of results,reduces the amplitude dynamic range and improves the efficiency of power amplifiers. The presented algorithm,compared with complex-coded GA,increases the convergence rate due to the search space's decrease. In order to overcome the prematurity and obtain better global optimization or quasi-global optimization,a new dual coding GA based on "species diversity retention" strategy and adaptive crossover and mutation probability are presented.
文摘Molecular mechanics and quantum mechanics simulations, as molecular simulation methods, were performed to investigate the effects of different surfaces, the promoter Co/Ni, the active phase of MoS2 or WS2, the content of Si and other factors on the order of interaction between the MoS2 （WS2） single slab and the support surface. The influence of Si content was studied by molecular mechanics, and an advantageous Si content was found. Various surfaces, promoters and active phases also played an important role in the interaction between the support surfaces and active phases, and some significant trends were found out. Quantum mechanics simulation was performed to study the possible effect of electrostatic interaction between the support and the active phase, upon which the calculations suggested that the existence of a favorable Si content was possible. The electronic effects of Co/Ni promoter and the intensity of Co/Mo/Ni/W/Li/AI/Si species bonded to the alumina support were also investigated by quantum mechanics, and it was found that the different electronic effects of Co and Ni might bring forth some obvious influences on the interaction between the support and the active phase. And the results of comparing the intensity of Co/Mo/Ni/W/Li/AI/Si species bonded to the support can also explain the different interaction intensity in various catalyst systems.
基金This work is supported by the National Key R&D Program of China(No.2017YFA0303700 and No.2018YFA0209101)the National Natural Science Foundation of China(No.21922302,No.21873047,No.11904168,No.91833305,and No.91850105)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Fundamental Research Funds for the Central University.
文摘Two-dimensional elec tronic spec troscopy(2DES)is a powerful met hod to probe the coherent electron dynamics in complicated systems.Stabilizing the phase difference of the incident ultrashort pulses is the mos t challenging par t for experimen tal demonstration of 2DES.Here,we present a tuto rial review on the 2DES proto cols based on active phase managements which are originally developed for quantum optics experiments.We introduce the 2DES techniques in box and pump-probe geometries with phase stabilization realized by interferometry,and outline the fully collinear 2DES approach with the frequency tagging by acoustic optical modulators and frequency combs.The combination of active phase managements,ultrashort pulses and other spectroscopic methods may open new opportunities to tackle essential challenges related to excited states.
文摘Active-phase engineering is regularly utilized to tune the selectivity of metal nanoparticles （NPs） in heterogeneous catalysis. However, the lack of understanding of the active phase in electrocatalysis has hampered the development of efficient catalysts for CO2 electroreduction. Herein, we report the systematic engineering of active phases of Pd NPs, which are exploited to select reaction pathways for CO2 electroreduction. In situ X-ray absorption spectroscopy, in situ attenuated total reflection-infrared spectroscopy, and density functional theory calculations suggest that the formation of a hydrogen-adsorbed Pd surface on a mixture of the α- and β-phases of a palladium-hydride core （α＋β PdHx@PdHx） above -0.2 V （vs. a reversible hydrogen electrode） facilitates formate production via the HCOO intermediate, whereas the formation of a metallic Pd surface on the β-phase Pd hydride core （β PdHx@Pd） below -0.5 V promotes CO production via the COOH＂ intermediate. The main product, which is either formate or CO, can be selectively produced with high Faradaic efficiencies （〉90%） and mass activities in the potential window of 0.05 to -0.9 V with scalable application demonstration.
基金supported by the Natural Science Foundation of China(nos.21725301,91645115,21821004,21932002,51631001,91645202,and 91945302)the National Key R&D Program of China(nos.2017YFB0602200,2017YFB0602205,and 2018YFA0208603)+1 种基金the Natural Science Foundation of Beijing Municipality(no.2191001)the Chinese Academy of Sciences Key Project(no.QYZDJ-SSWSLH054).
文摘Despite the extensive study of the Fe-based Fischer-Tropsch synthesis(FTS)over the past 90 years,its active phases and reaction mechanisms are still unclear due to the coexistence of metals,oxides,and carbide phases presented under realistic FTS reaction conditions and the complex reaction network involving CO activation,C-C coupling,and methane formation.To address these issues,we successfully synthesized a range of pure-phase iron and iron-carbide nanoparticles(Fe,Fe_(5)C_(2),Fe_(3)C,and Fe_(7)C_(3))for the first time.By using them as the ideal model catalysts on high-pressure transient experiments,we identified unambiguously that all the iron carbides are catalytically active in the FTS reaction while Fe_(5)C_(2) is the most active yet stable carbide phase,consistent with density functional theory(DFT)calculation results.The reaction mechanism and kinetics of Fe-based FTS were further explored on the basis of those model catalysts by means of transient high-pressure stepwise temperature-programmed surface reaction(STPSR)experiments and DFT calculations.Our work provides new insights into the active phase of iron carbides and corresponding FTS reaction mechanism,which is essential for better iron-based catalyst design for FTS reactions.
基金the financial support from the Guangxi Key Research and Development Program(AB21220040).
文摘The present study investigates the active phases and the role of oxygen species in the toluene oxidation process over CuCeZrO_(x) catalysts prepared with bacterial cellulose(BC),and compares them with nitric acid pickling CuCeZrO_(x)-BC(H)and CeZrO_(x)-BC catalysts.The investigation is carried out using in-situ DRIFT,O_(2)-TPD,H_(2)-TPR,XRD,and TEM techniques.Our findings suggest that dispersed CuO species on the catalyst surface,Cu-Ce-Zr-O,and Ce-Zr-O solid solutions are active for toluene oxidation over CuCeZrO_(x)-BC,with corresponding activities decreasing successively.The in-situ DRIFT results demonstrate that gaseous oxygen facilitates the chemisorption of toluene on active oxygen species,forming benzoyl oxide species and partially oxidizing the absorbed intermediates to benzyl alcohol at room temperature.Furthermore,lattice oxygen is experimentally found to be involved in the deep oxidation of toluene,and the lattice oxygen present in dispersed CuO species dominates the toluene oxidation process over CuCeZrO_(x)-BC.
基金supported by the National Natural Science Foundation of China(Grant No.U21B2099,U22A20425,and 22208377)Natural Science Foundation of Shandong Province(ZR2021QE062)Fundamental Research Funds for the Central Universities,Ocean University of China(grant number 202364004)。
文摘Electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to ethylene(C_(2)H_(4))represents a promising approach to reducing CO_(2)emissions and producing high-value chemicals.The ethylene productivity is always limited by the slow reaction kinetics and the high-performance catalysts are significantly desired.Many efforts have been made to develop a catalyst to activate CO_(2)molecules.However,as another reactant,H2O activation does not receive the attention it deserves.In particular,slow H2O dissociation kinetics limit the rate of proton supply,severely impairing the production of C_(2)H_(4).Here,we designed a MgO-modified CuO catalyst(MgO/CuO),which can promote H2O dissociation and enhance CO_(2)adsorption at the same time to realize the efficient ethylene production.The optimal catalyst exhibits a Faraday efficiency for C_(2)H_(4)reached 54.4%at−1.4 V vs.RHE in an H-cell,which is 1.4 times that of pure CuO(37.9%),and it was further enhanced to a 56.7%in a flow cell,with a high current density of up to 535.9 mA cm−2 at−1.0 V vs.RHE.Experimental and theoretical calculations show that MgO/CuO plays a bifunctional role in the CO_(2)RR,which facilitates the adsorption and activation of CO_(2)by CuO and simultaneously accelerates H2O dissociation by MgO doping.The in situ XRD experiments demonstrate that the introduction of MgO protects CuO active phase to avoid overreduction and preserves the active centers for CO_(2)RR.In combination with in situ FTIR and DFT calculations,the protonation process from*CO to*COH and asymmetric C–C coupling step are promoted by the enhanced water activation and proton coupling on MgO/CuO.This work provides new insights into the CO_(2)and H_(2)O coactivation mechanism in CO_(2)RR and a potential universal strategy to design ethylene production electrocatalysts.
文摘Fe-based catalysts are widely used for CO_(2)hydrogenation to light olefins(C_(2–4)=);however,precise regulation of active phases and the balance between intermediate reactions remain significant challenges.Herein,we find that the addition of moderate amounts of Ti forms a strong interaction with Fe compositions,modulating the Fe_(3)O_(4)and Fe_(5)C_(2)contents.Enhanced interaction leads to an increased Fe_(5)C_(2)/Fe_(3)O_(4)ratio,which in turn enhances the adsorption of reactants and intermediates,promoting CO hydrogenation to unsaturated alkyl groups and facilitating C–C coupling.Furthermore,the strong Fe-Ti interaction induces the preferential growth of Fe_(5)C_(2)into prismatic structures that expose the(020),(–112),and(311)facets,forming compact active interfacial sites with Fe_(3)O_(4)nanoparticles.These facet and interfacial effects significantly promote the synergistic coupling of the reverse water gas shift and Fischer-Tropsch reactions.The optimized 3K/FeTi catalyst with the highest Fe_(5)C_(2)/Fe_(3)O_(4)ratio of 3.6 achieves a 52.2%CO_(2)conversion rate,with 44.5%selectivity for C2–4=and 9.5%for CO,and the highest space-time yield of 412.0 mg gcat^(–1)h^(–1)for C_(2–4)=.
基金Project supported by the Fundamental Research Funds for the Central Universities(30919011220)the Key Project of Jiangsu Province Programs for Research and Development(BE2019115)Top-notch Academic Programs Project of Jiangsu Higher Education Institutions。
文摘Revealing the active species of the catalyst is conducive to the design of more efficient catalyst.Herein,we tried to demonstrate the roles of amorphous and crystalline structures on CePO_(4)catalyst during selective catalytic reduction(SCR)of NO_(x)by NH_(3).Higher calcination temperature promotes the transfer of amorphous structure to crystalline structure on the surface of CePO_(4).Both amorphous and crystalline CePO_(4)species on CePO-X samples can provide acid sites for NH_(3)adsorption,but the former can provide more acid sites.The superior redox property of surface amorphous CePO_(4)species contributes to its high NH_(3)-SCR activity at low temperature,but it also leads to the decrease of high temperature(>350℃)NH_(3)-SCR activity due to the oxidation of NH_(3).In contrast,crystalline CePO_(4)species shows high activity only at high temperature because of its poor redox property.Therefo re,it can be inferred that amo rphous and crystalline structures on CePO_(4)catalyst can be the efficient active species of NH_(3)-SCR at low and high temperature,respectively.
文摘The effect of potassium-decoration was studied on the activity of water-gas shift （WGS） reaction over the Co-Mo-based catalysts supported on active carbon （AC）, which was prepared by incipient wetness co-impregnation method. The decoration of potassium on active carbon in advance enhances the activities of the CoMo-K/AC catalysts for WGS reaction. Highest activity （about 92% conversion） was obtained at 250 ？ C for the catalyst with an optimum K 2 O/AC weight ratio in the range from 0.12 to 0.15. The catalysts were characterized by TPR and EPR, and the results show that activated carbon decorated with potassium makes Co-Mo species highly dispersed, and thus easily reduced and sulfurized. XRD results show that an appropriate content of potassium-decoration on active carbon supports may favors the formation of highly dispersed Co 9 S 8 -type structures which are situated on the edge or a site in contact with MoS 2 , K-Mo-O-S, Mo-S-K phase. Those active species are responsible for the high activity of CoMo-K/AC catalysts.
基金financially supported by National Basic Research Program of China(No.2012CB720400)the National Natural Science Foundation of China(No.51504216)
文摘The reduction of titanomagnetite（TTM） ironsand, which contains 11.41wt% TiO_2 and 55.63wt% total Fe, by graphite was performed using a thermogravimetric analysis system under an argon gas atmosphere at 1423–1623 K. The behavior and effects of titanium in TTM ironsand during the reduction process were investigated by means of thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. During the reduction procedure, the titanium concentrated in the slag phase, where the phase transformation followed this sequence： Fe O ＋ FeTiO_3 → Fe_2 TiO_4 → FeTiO_3 → FeTi_2O_5 → TiO_2. The calculated results for the reduction kinetics showed that the carbothermic reduction was controlled by the diffusion of ions through the product layer. Furthermore, the apparent activation energy was 170.35 k J·mol^（-1）.
基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)Discovery(No239080-2010)the project of Shandong science and technology development plan(No2014GGX103035),China
文摘Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employed. During the DSC runs, heating and cooling rates of 1, 3, 10, and 20 °C·min^(-1) were applied to investigate the heating and cooling effects on dissolution of secondary eutectic phases and microstructure evolution. Various reactions corresponding to troughs and peaks of the DSC curves were identified as corresponding to phase transformations taking place during dissolution or precipitation suggested by the principles of thermodynamics and kinetics. The comparison of the identified characteristic temperatures in the measured heating and cooling curves are generally in good agreement with the computed equilibrium temperatures. The microstructure analyses by scanning electron microscopy(SEM) with energy dispersive X-ray spectroscopy(EDS) indicate that the distribution and morphology of secondary phases present in the microstructure of the annealed sample are similar to the as-cast A380, i.e., strip β(Si), buck bone like or dot distributed θ(Al_2Cu), β(Al_5Fe Si) and Al_(15)(FeMn)_3Si_2. Two kinetic methods are employed to calculate the activation energies of the three common troughs and three common peaks in DSC curves of SC A380. The activation energies of the identified reaction θ_(CuAl_2) = α(Al)+β(Si) is 188.7 and 187.1 k J?mol^(-1) when the activation energies of reaction α(Al)+β(Si)→θCu Al_2 is^(-1)22.7 and^(-1)21.8 k J?mol^(-1), by the Kissinger and Starink methods, respectively.
基金supported by the Key Research & Development Plan of Shandong Province (the Major Scientific and Technological Innovation Projects, 2021ZDSYS13)the Natural Science Foundation of Shandong Province (ZR2021MB135)
文摘CuCl-based catalysts are the most commonly used catalysts for the“direct synthesis”of trimethoxysilane(M3).CuCl species are sensitive to air and water,and are prone to oxidation deactivation.When CuCl is directly used as a catalyst,it needs to be purified before the utilization,and the operating conditions for the catalyst preparation are relatively harsh,requiring the inert gas environment.Considering a high-temperature activation step required for CuCl-based catalysts used for catalyzing synthesis of M3 to form active phase Cu–Si alloys(Cu_(x)Si)with Si powder,in this work,a series of catalysts for the“direct synthesis”of M3 were obtained by a one-step high-temperature activation of the mixture of stable CuCl_(2) precursors,activated carbon-reducing agent,and Si powder,simultaneously achieving the reduction of CuCl_(2) to CuCl and the formation of active phase Cu_(x)Si alloys of CuCl with Si powder.The prepared samples were characterized through various characterization techniques,and investigated for the catalytic performance for the“direct synthesis”of M3.Moreover,the operation conditions were optimized,including the activation temperature,catalyst dosage,Si powder particle size,and reaction temperature.The characterization results indicate that during the one-step activation process,the CuCl_(2) precursor is reduced to CuCl,and the resulting CuCl simultaneously reacts with Si powder to form active phases Cu3Si and Cu15Si4 alloys.The optimal catalyst Sacm(250,0.8:10)exhibits a good catalytic activity with selectivity of 95%and yield of 77%for M3,and shows a good universality for various alcohol substrates.Furthermore,the catalytic mechanism of the prepared catalyst for the“direct synthesis”of M3 was discussed.
基金supported by the Foundation of Lidar and Device Laboratory,Sichuan Province,Chinathe Basic Military Research Institutes Steadily Support Special Projects。
文摘This study presents active coherent beam combining(CBC)of a pulsed laser based on sampling the intrapulse evaluation function.By precisely controlling the trigger sequence of an analog-to-digital converter,the fixed time point of the pulse light is sampled as an evaluation function for CBC.The active CBC of two fiber amplifiers with a 500 ns pulse width and a 10 k Hz repetition rate is experimentally demonstrated by applying a hill-climbing algorithm.The residual phase error is approximately λ/27.A coherent Doppler wind lidar(CDWL)based on CBC light source is verified.The experimental results verify the feasibility of using the pulsed CBC to improve the pulse energy of a CDWL without degrading performance.
基金the National Basic Research Program of China(No.2013CB933100)the National Natural Science Foundation of China(No.21173174,No.21161130522,No.21033006and No.20923004)the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT1036)
文摘Catalytic conversion of synthesis gas （CO＋H2） into hydrocarbons, also known as Fischer-Tropsch （FT） synthesis, is a crucial reaction for the translbrmation of non-petroleum carbon resources such as coal, natural gas, shale gas, coal-bed gas and biogas, as well as biomass into liquid fuels and chemicals. Many factors can influence the catalytic behavior of a FT catalyst. This review highlights recent advances in understanding some key catalyst factors, including the chemical state of active phases, the promoters, the size and the microenvironment of active phase, which determine the CO conversion activity and the product selectivity, particularly the selectivity to C5 ＋ hydrocarbons.
文摘The widespread utilization of fossil fuels has caused an associated increase in CO_(2) emissions over the past few decades,which has resulted in global warming and ocean acidification.CO hydrogenation(Fischer‐Tropsch synthesis,FTS)is considered a significant route for the production of liquid fuels and chemicals from nonpetroleum sources to meet worldwide demand.Conversion of CO_(2) with renewable H_(2) into valuable hydrocarbons is beneficial for reducing dependence on fossil fuels and mitigating the negative effects of high CO_(2) concentrations in the atmosphere.Iron‐based catalysts exhibit superior catalytic performance in both FTS and CO_(2) hydrogenation to value‐added hydrocarbons.The abundance and low cost of iron‐based catalysts also promote their wide application in CO_(x) hydrogenation.This paper provides a comprehensive overview of the significant developments in the application of iron‐based catalysts in these two fields.The active phases,promoter effect,and support of iron‐based catalysts are discussed in the present paper.Based on understanding of these three essential aspects,we also cover recent advances in the design and preparation of novel iron‐based catalysts for FTS and CO_(2) hydrogenation.Current challenges and future catalytic applications are also outlined.
