Riedel shear system,which consists of some different oriented faults and derivative structures,is an important pattern of tectonic activity and stress regulation,which has been widely applied to the interpretation of ...Riedel shear system,which consists of some different oriented faults and derivative structures,is an important pattern of tectonic activity and stress regulation,which has been widely applied to the interpretation of intracontinental deformation.The Laolongwan Basin,located in the western Haiyuan fault zone at the northeastern Tibetan Plateau,is a key area to study the Cenozoic intracontinental deformation in the northeastern plateau,which formed a complex active fault system during the Cenozoic.However,the activity of these faults and their kinematic mechanism remain unclear.In this contribution,based on detailed structural interpretation of remote sensing image,field observations and OSL dating analysis,we propose a Riedel Shear model of active fault system in the Laolongwan Basin.Our observations show that this active fault system consist of four major faults,including the left strike-slip Hasi Shan fault and Zihong Shan fault with thrusting characteristics,the Southern Zihong Shan thrust fault and the Mijia Shan normal fault.The fault offset and OSL dating analyses suggest that the left-lateral slip rate of the Hasi Shan fault is~2.60-3.01 mm/a since ca.15 ka,whereas the Zihong Shan fault is~1.10-1.13 mm/a since ca.14 ka.Faultslip vectors analyses indicate that the active fault system related to the Riedel Shear in the Laolongwan Basin was controlled by the regional ENE-WSW compressive stress.This compression also caused the significant left-lateral strike-slip movement along the Haiyuan fault zone at the same time,which might result from the northeastward continuous expanding of the Tibetan Plateau during the Late Cenozoic.展开更多
The Sichuan-Xizang transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on di...The Sichuan-Xizang transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Xizang transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Xizang transportation corridor.展开更多
Based on the convection and diffusion mechanisms of radon migration, in this paper we deduce the two-dimensional differential equation for radon transportation in the overburden above active fault zones with an unlimi...Based on the convection and diffusion mechanisms of radon migration, in this paper we deduce the two-dimensional differential equation for radon transportation in the overburden above active fault zones with an unlimited extension along the strike. Making use of the finite difference method, the radon concentration distribution in the overburden above active faults is calculated and modeled. The active fault zone parameters, such as the depth and the width of the fault zone, and the value of radon concentration, can be inverted from the measured radon concentration curve. These realize quantitative interpretation for radon concentration anomalies. The inversion results are in good agreement with the actual fault zone parameters.展开更多
On the basis of the Xining active urban fault survey, we studied the relationship between the active urban fault and fold deformation. The result of this research shows that the Huangshuihe fault and the NW-striking f...On the basis of the Xining active urban fault survey, we studied the relationship between the active urban fault and fold deformation. The result of this research shows that the Huangshuihe fault and the NW-striking fault on the northern bank of the Huangshulbe River are tensional faults on top of an anticline, the Nanchuanhe fault is a transverse tear fault resulting from differential folding on two sides of the fault, the east bank of the Beichuanhe River fault is a compressional fault developed on the core or climb of a syncline. By balance profile analysis of fold deformation and inversion of gravity anomaly data, we obtained the depth of the detachment plane and established the seismotectonic model of the ）fining urban area. Based on the seismotectonic model, we analyzed the earthquake potential of the active urban fault.展开更多
This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region...This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.展开更多
Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of r...Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of rock masses in active fault zones which have been investigated previously are the key design basis for such projects.Therefore,a discrete element numerical model with different fault types,slip time,dip angles,and complex geological features was established,and then the creep slip for normal,reverse,and strike-slip faults were simulated to analyze the displacement distribution in the fault rock mass.A disk rotation test system and the corresponding laboratory test method were developed for simulating rock mass displacement induced by creep slippage of faults.A series of rotation tests for softand hard-layered specimens under combined compression and torsional stress were conducted to verify the numerical results and analyze the factors influencing the displacement distribution.An S-shaped displacement distribution independent of fault dip angle was identified corresponding to reverse,normal,and strike-slip faults.The results indicated that the higher the degree of horizontal extrusion,the softer the rock mass at the fault core,and the higher the degree of displacement concentration in the fault core;about 70%of the creep slip displacement occurs within this zone under 100 years of creep slippage.展开更多
It is important to explore active faults in urban areas and their surroundings for earth- quake disaster mitigation. Satellite remote sensing techniques can play an important role in such active fault exploration. It ...It is important to explore active faults in urban areas and their surroundings for earth- quake disaster mitigation. Satellite remote sensing techniques can play an important role in such active fault exploration. It can not only reveal the pattern of active faults and active tectonics on a macroscop- ic scale, but also monitor the occurrence, development and rules of temporal-spatial evolution of active faults. In this paper, we use the Hangzhou area as an example to introduce methods of extracting de- tailed active fault information when covered by thick unconsolidated Quaternary sediment, using im- age enhancement and image fusion etc. to improve the definition and precision of satellite images and presenting a three-dimensional （3D） image to illustrate tectono-geomorphic features along the relevant faults. We have also collected aeromagnetic anomaly data, shallow seismic exploration data and dating data, and carried out field surveys to validate the characteristics of active faults based on remote sens- ing images. The results revealed about the faults showed a high consistency with traditional geological knowledge, and demonstrate that it is feasible to explore active faults in a weakly active tectonic area by using satellite remote sensing techniques and contribute to large engineering projects and research on neotectonics.展开更多
The Yinwashan and Xinminpu faults are located in the Jiuxi Basin in the western end of the Hexi Corridor. The determination of their activity and slip rates is of great significance for understanding the eastward exte...The Yinwashan and Xinminpu faults are located in the Jiuxi Basin in the western end of the Hexi Corridor. The determination of their activity and slip rates is of great significance for understanding the eastward extension of the Altyn Tagh fault. Based on geological and geomorphologic field survey, trench excavation, optically stimulated luminescence dating, we define the fault geometry and kinematic properties of the two faults. Based on fault scarps measurement using differential GPS and 10 Be surface exposure dating, we determined vertical slip rate of 0.09±0.01 mm/yr for the Yinwashan fault and 0.1±0.02 mm/yr for the Xinminpu fault. Using the dips observed in trenches and natural sections, we estimated horizontal shortening rates of 0.05±0.03 and 0.23±0.06 mm/yr, respectively. No significant strike slip motion is observed on these two faults, and we infer that this region was dominated by horizontal shortening in the Late Quaternary. Although the shortening rate is quite low on each individual fault, together with other faults in this area, these two faults have an essential role in transferring slip from the eastern end of the Altyn Tagh fault and in accommodating the northeastward growth of Tibetan Plateau.展开更多
Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fau...Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fault-segments. The results show that the earthquake recurrence on entire active fault zones, each of them is made up of multiple segments, displays three types of behavior, i.e., the clustering behavior, the random behavior, and the poor quasi-periodic behavior. The major one is the sparse clustering behavior, its recurrence process often exhibits that clusters (active periods) and gaps (quiescent periods) occur alternatively in varying degrees. The recurrence intervals within and between clusters, the durations of individual clusters, the earthquake number and strength of every cluster are all variable. The recurrence process is non-linear, there is neither the strength-time dependence nor the time-strength dependence. However, the earthquake recurrence processes on individual fault-segments are much more simple, and mainly display either the quasi-periodic or the time-predictable behaviors. Also, this study further discovers that the temporal clustering in earthquake recurrence process on entire fault zones is mainly caused by the rupture 'contagion' on different fault-segments within relatively short periods of time. Along active fault zones, the degree and orientation of rupture 'contagion' may vary with different seismic cycles, and the 'contagion' seems to be able to jump over unbroken 'gaps' on the fault zones.展开更多
The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Activ...The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Active faults and seismic activity are important geological factors for the planning and development of the YREB.In this paper,the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings,using both remote-sensing data and geological survey results.The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed.The main active fault zones in the western YREB,together with the neighboring regional active faults,make up an arc fault block region comprising primarily of Sichuan-Yunnan and a“Sichuan-Yunnan arc rotational-shear active tectonic system”strong deformation region that features rotation,shear and extensional deformation.The active faults in the central-eastern YREB,with seven NE-NNE and seven NW-NWW active faults(the“7-longitudinal,7-horizontal”pattern),macroscopically make up a“chessboard tectonic system”medium-weak deformation region in the geomechanical tectonic system.They are also the main geological constraints for the crustal stability of the YREB.展开更多
Offshore active faults, especially those in the deep sea, are very difficultto study because of the water and sedimentary cover. To characterize the nature and geometry ofoffshore active faults, a combination of metho...Offshore active faults, especially those in the deep sea, are very difficultto study because of the water and sedimentary cover. To characterize the nature and geometry ofoffshore active faults, a combination of methods must be employed. Generally, seismic profiling isused to map these faults, but often only fault-related folds rather than fracture planes are imaged.Multi-beam swath bathymetry provides information on the structure and growth history of a faultbecause movements of an active fault are reflected in the bottom morphology. Submersible anddeep-tow surveys allow direct observations of deformations on the seafloor (including fracture zonesand microstructures). In the deep sea, linearly aligned cold seep communities provide indirectevidence for active faults and the spatial migration of their activities. The Western Sagami Bayfault (WSBF) in the western Sagami Bay off central Japan is an active fault that has been studied indetail using the above methods. The bottom morphology, fractured breccias directly observed andphotographed, seismic profiles, as well as distribution and migration of cold seep communitiesprovide evidence for the nature and geometry of the fault. Focal mechanism solutions of selectedearthquakes in the western Sagami Bay during the period from 1900 to 1995 show that the maximumcompression trends NW-SE and the minimum stress axis strikes NE-SW, a stress pattern indicating aleft-lateral strike-slip fault.展开更多
-On the basis of the data of geophysics and seismic activities, the analyses of the active faults, seismic activities and the sea floor unstable factors of the Zhujiang River Mouth Basin have been made so as to study ...-On the basis of the data of geophysics and seismic activities, the analyses of the active faults, seismic activities and the sea floor unstable factors of the Zhujiang River Mouth Basin have been made so as to study the characteristics of the compressional subactive continental margin of Cathaysian system, arc littoral strongly active fracture zone, the division of seismic subzone and seismic zone of the continental margin of northern South China Sea, the potential focal area, and to analyze the regional stability. We consider that the Zhujiang River Mouth Basin belongs to a stable or a moderately stable region.展开更多
The most common method used to describe earthquake activity is based on the changes in physical parameters of the earth's surface such as displacement of active fault and seismic wave.However,such approach is not ...The most common method used to describe earthquake activity is based on the changes in physical parameters of the earth's surface such as displacement of active fault and seismic wave.However,such approach is not successful in forecasting the movement behaviors of faults.In the present study,a new mechanical model of fault activity,considering the shear strength on the fault plane and the influence of the resistance force,is established based on the occurrence condition of earthquake.A remote real-time monitoring system is correspondingly developed to obtain the changes in mechanical components within fault.Taking into consideration the local geological conditions and the history of fault activity in Zhangjiakou of China,an active fault exposed in the region of Zhangjiakou is selected to be directly monitored by the real-time monitoring technique.A thorough investigation on local fault structures results in the selection of two suitable sites for monitoring potential active tectonic movements of Zhangjiakou fault.Two monitoring curves of shear strength,recorded during a monitoring period of 6 months,turn out to be steady,which indicates that the potential seismic activities hardly occur in the adjacent region in the near future.This monitoring technique can be used for early-warning prediction of the movement of active fault,and can help to further gain an insight into the interaction between fault activity and relevant mechanisms.展开更多
It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of ac...It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City”, started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions ：展开更多
The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displace...The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.展开更多
Fracture-fissure systems found at mid-ocean ridges are dominating conduits for the circulation of metallogenic fluid.Ascertaining the distribution area of active faults on both sides of mid-ocean ridges will provide a...Fracture-fissure systems found at mid-ocean ridges are dominating conduits for the circulation of metallogenic fluid.Ascertaining the distribution area of active faults on both sides of mid-ocean ridges will provide a useful tool in the search for potential hydrothermal vents,thus guiding the exploration of modern seafloor sulfides.Considering the MidAtlantic Ridge 20°N–24°N(NMAR)and North Chile Rise(NCR)as examples,fault elements such as Fault Spacing(?S)and Fault Heave(?X)can be identified and quantitatively measured.The methods used include Fourier filtering of the multi-beam bathymetry data,in combination with measurements of the topographic slope,curvature,and slope aspect patterns.According to the Sequential Faulting Model of mid-ocean ridges,the maximal migration distance of an active fault on either side of mid-ocean ridges—that is,the distribution range of active faults—can be measured.Results show that the maximal migration distance of active faults at the NMAR is 0.76–1.01 km(the distance is larger at the center than at the ends of this segment),and at the NCR,the distribution range of active faults is 0.38–1.6 km.The migration distance of active faults on the two study areas is positively related to the axial variation of magma supply.In the NCR study area,where there is an abundant magma input,the number of faults within a certain distance is mainly affected by the variation of lithospheric thickness.Here a large range of faulting clearly corresponds to a high proportion of magmatism to seafloor spreading near mid-ocean ridges(M)value,and in the study area of the NMAR,there is insufficient magmatism,and the number of faults may be controlled by both lithospheric thickness and magma supply,leading to a less obvious positive correlation between the distribution range of active faults and M.展开更多
Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China
Marine active fault exploration and paleoearthquake research are still a gap in China. The paper gives a review on major research methods and new progress made abroad, including submarine survey boat, seismic reflecti...Marine active fault exploration and paleoearthquake research are still a gap in China. The paper gives a review on major research methods and new progress made abroad, including submarine survey boat, seismic reflection and acoustic reflection. Through detailed studies of offset history of 10 ka to 30 ka, it is possible to determine paleoearthquake recurrent intervals and elapsed time since last major earthquake. It is suggested that active fault exploration can be carried out by acoustic exploring method in large earthquake region of Bohai Sea. Paleoearthquake activity history can be revealed and earthquake risk in the future can be predicted.展开更多
Active faults in Quaternary unconsolidated sediments are important indicators to determine paleoearthquake events. They can be studied by macroscopic geological survey, but some problems have been encountered, such as...Active faults in Quaternary unconsolidated sediments are important indicators to determine paleoearthquake events. They can be studied by macroscopic geological survey, but some problems have been encountered, such as invisible active faults. The authors found an approach to solve these problems by microstructural observation. Firstly, oriented original-state samples of Quaternary unconsolidated sediments in active fault zones are collected. Secondly, the samples are consolidated in laboratory. Thirdly, microstructural slides are ground in three-dimension coordinate system. Lastly, microstructures are observed in the microscopic field. By this method, the movement properties of active faults can be determined in lack of the support of macroscopic data. The invisible faults in Quaternary unconsolidated sediments can be found and described. The mechanisms of die-out faults can be also studied. Moreover, the boundaries between different unconsolidated sediments in engineering sites can be studied to judge whether they are active faults or not.展开更多
The depth of upper fault point is the key data for ascertaining the active age of a buried fault on a plain. The difference of depth obtained from same fault may be dozens to several hundred meters when using differen...The depth of upper fault point is the key data for ascertaining the active age of a buried fault on a plain. The difference of depth obtained from same fault may be dozens to several hundred meters when using different geophysical methods. It can result in the absolutely opposite conclusions when judging fault activity. Because of a lack of an artificial earthquake source with wide band and high central frequency, many kinds of methods have to be used together. The higher the frequency of the artificial earthquake wave, electromagnetic wave and sonic wave, the higher the resolution. However the attenuation is also very fast and the exploration depth is very shallow. The reverse is also true. The frequency of artificial seismic waves is in the tens of Hz. Its exploration depth is big and the resolution is poor. The frequency of radar electromagnetic waves is about a million Hz, indicating that the resolving power is better, but the exploration depth is very shallow. However, the acoustic frequency is thousands of Hz, its resolving power is better than that of the artificial earthquake method and the exploration depth is larger than that of the radar method. So it is suitable for extra shallow exploration in the thick deposit strata of the Quaternary. The preliminary results detected using the high frequency acoustic method in extra shallow layers indicates that previous inferences about some fault activity in the eastern part of the North China plain may need to be greatly corrected.展开更多
基金financially supported by the Natural Science Foundation of Chongqing,China(No.cstc2020jcyj-msxm X0487)the Open Fund of Key Laboratory of Sedimentary Basins and Oil and Gas Resources,the Ministry of Natural Resources(No.cdcgs2022006)+2 种基金the National Natural Science Foundation of China(No.42072001)the China Geological Survey(No.DD20190018)the Science and Technology Innovation Fund for Postgraduates of Chongqing University of Science and Technology(No.YKJCX2220101)。
文摘Riedel shear system,which consists of some different oriented faults and derivative structures,is an important pattern of tectonic activity and stress regulation,which has been widely applied to the interpretation of intracontinental deformation.The Laolongwan Basin,located in the western Haiyuan fault zone at the northeastern Tibetan Plateau,is a key area to study the Cenozoic intracontinental deformation in the northeastern plateau,which formed a complex active fault system during the Cenozoic.However,the activity of these faults and their kinematic mechanism remain unclear.In this contribution,based on detailed structural interpretation of remote sensing image,field observations and OSL dating analysis,we propose a Riedel Shear model of active fault system in the Laolongwan Basin.Our observations show that this active fault system consist of four major faults,including the left strike-slip Hasi Shan fault and Zihong Shan fault with thrusting characteristics,the Southern Zihong Shan thrust fault and the Mijia Shan normal fault.The fault offset and OSL dating analyses suggest that the left-lateral slip rate of the Hasi Shan fault is~2.60-3.01 mm/a since ca.15 ka,whereas the Zihong Shan fault is~1.10-1.13 mm/a since ca.14 ka.Faultslip vectors analyses indicate that the active fault system related to the Riedel Shear in the Laolongwan Basin was controlled by the regional ENE-WSW compressive stress.This compression also caused the significant left-lateral strike-slip movement along the Haiyuan fault zone at the same time,which might result from the northeastward continuous expanding of the Tibetan Plateau during the Late Cenozoic.
基金supported by the National Natural Science Foundation of China(Grant Nos.41825018,41977248,42207219)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2019QZKK0904)。
文摘The Sichuan-Xizang transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Xizang transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Xizang transportation corridor.
文摘Based on the convection and diffusion mechanisms of radon migration, in this paper we deduce the two-dimensional differential equation for radon transportation in the overburden above active fault zones with an unlimited extension along the strike. Making use of the finite difference method, the radon concentration distribution in the overburden above active faults is calculated and modeled. The active fault zone parameters, such as the depth and the width of the fault zone, and the value of radon concentration, can be inverted from the measured radon concentration curve. These realize quantitative interpretation for radon concentration anomalies. The inversion results are in good agreement with the actual fault zone parameters.
基金This project was sponsored by National Development and Reform Commission (NDRC) on studies of experimental exploration of active fault in urban area(20041138)
文摘On the basis of the Xining active urban fault survey, we studied the relationship between the active urban fault and fold deformation. The result of this research shows that the Huangshuihe fault and the NW-striking fault on the northern bank of the Huangshulbe River are tensional faults on top of an anticline, the Nanchuanhe fault is a transverse tear fault resulting from differential folding on two sides of the fault, the east bank of the Beichuanhe River fault is a compressional fault developed on the core or climb of a syncline. By balance profile analysis of fold deformation and inversion of gravity anomaly data, we obtained the depth of the detachment plane and established the seismotectonic model of the ）fining urban area. Based on the seismotectonic model, we analyzed the earthquake potential of the active urban fault.
基金the auspice of National Key Basic Project(973)(granted number 2008CB425702)National Science and Technology Project(granted Number SinoProbe-08)China Geological Survey project(granted number1212010670104)
文摘This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.
基金Project(U1865203)supported by the Key Projects of the Yalong River Joint Fund of the National Natural Science Foundation of ChinaProjects(41941018,51879135)supported by the National Natural Science Foundation of China。
文摘Active fault creep slip induces deformation of rock mass buried deeply in fault zones that significantly affect the operational safety of long linear projects passing through it.Displacement distribution patterns of rock masses in active fault zones which have been investigated previously are the key design basis for such projects.Therefore,a discrete element numerical model with different fault types,slip time,dip angles,and complex geological features was established,and then the creep slip for normal,reverse,and strike-slip faults were simulated to analyze the displacement distribution in the fault rock mass.A disk rotation test system and the corresponding laboratory test method were developed for simulating rock mass displacement induced by creep slippage of faults.A series of rotation tests for softand hard-layered specimens under combined compression and torsional stress were conducted to verify the numerical results and analyze the factors influencing the displacement distribution.An S-shaped displacement distribution independent of fault dip angle was identified corresponding to reverse,normal,and strike-slip faults.The results indicated that the higher the degree of horizontal extrusion,the softer the rock mass at the fault core,and the higher the degree of displacement concentration in the fault core;about 70%of the creep slip displacement occurs within this zone under 100 years of creep slippage.
基金supported by the Major Research Project of the Ministry of Land and Resources,China(No.1212011120887)
文摘It is important to explore active faults in urban areas and their surroundings for earth- quake disaster mitigation. Satellite remote sensing techniques can play an important role in such active fault exploration. It can not only reveal the pattern of active faults and active tectonics on a macroscop- ic scale, but also monitor the occurrence, development and rules of temporal-spatial evolution of active faults. In this paper, we use the Hangzhou area as an example to introduce methods of extracting de- tailed active fault information when covered by thick unconsolidated Quaternary sediment, using im- age enhancement and image fusion etc. to improve the definition and precision of satellite images and presenting a three-dimensional （3D） image to illustrate tectono-geomorphic features along the relevant faults. We have also collected aeromagnetic anomaly data, shallow seismic exploration data and dating data, and carried out field surveys to validate the characteristics of active faults based on remote sens- ing images. The results revealed about the faults showed a high consistency with traditional geological knowledge, and demonstrate that it is feasible to explore active faults in a weakly active tectonic area by using satellite remote sensing techniques and contribute to large engineering projects and research on neotectonics.
基金the Basic Research Project of Institute of Earthquake Science,CEA(No.2019IESLZ01)the National Science Foundation of China(No.41402186)。
文摘The Yinwashan and Xinminpu faults are located in the Jiuxi Basin in the western end of the Hexi Corridor. The determination of their activity and slip rates is of great significance for understanding the eastward extension of the Altyn Tagh fault. Based on geological and geomorphologic field survey, trench excavation, optically stimulated luminescence dating, we define the fault geometry and kinematic properties of the two faults. Based on fault scarps measurement using differential GPS and 10 Be surface exposure dating, we determined vertical slip rate of 0.09±0.01 mm/yr for the Yinwashan fault and 0.1±0.02 mm/yr for the Xinminpu fault. Using the dips observed in trenches and natural sections, we estimated horizontal shortening rates of 0.05±0.03 and 0.23±0.06 mm/yr, respectively. No significant strike slip motion is observed on these two faults, and we infer that this region was dominated by horizontal shortening in the Late Quaternary. Although the shortening rate is quite low on each individual fault, together with other faults in this area, these two faults have an essential role in transferring slip from the eastern end of the Altyn Tagh fault and in accommodating the northeastward growth of Tibetan Plateau.
基金Chinese Joint Seismological Science Foundation !(95-07-423).
文摘Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fault-segments. The results show that the earthquake recurrence on entire active fault zones, each of them is made up of multiple segments, displays three types of behavior, i.e., the clustering behavior, the random behavior, and the poor quasi-periodic behavior. The major one is the sparse clustering behavior, its recurrence process often exhibits that clusters (active periods) and gaps (quiescent periods) occur alternatively in varying degrees. The recurrence intervals within and between clusters, the durations of individual clusters, the earthquake number and strength of every cluster are all variable. The recurrence process is non-linear, there is neither the strength-time dependence nor the time-strength dependence. However, the earthquake recurrence processes on individual fault-segments are much more simple, and mainly display either the quasi-periodic or the time-predictable behaviors. Also, this study further discovers that the temporal clustering in earthquake recurrence process on entire fault zones is mainly caused by the rupture 'contagion' on different fault-segments within relatively short periods of time. Along active fault zones, the degree and orientation of rupture 'contagion' may vary with different seismic cycles, and the 'contagion' seems to be able to jump over unbroken 'gaps' on the fault zones.
基金This research is funded by the China Geological Survey project(DD20160268).
文摘The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Active faults and seismic activity are important geological factors for the planning and development of the YREB.In this paper,the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings,using both remote-sensing data and geological survey results.The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed.The main active fault zones in the western YREB,together with the neighboring regional active faults,make up an arc fault block region comprising primarily of Sichuan-Yunnan and a“Sichuan-Yunnan arc rotational-shear active tectonic system”strong deformation region that features rotation,shear and extensional deformation.The active faults in the central-eastern YREB,with seven NE-NNE and seven NW-NWW active faults(the“7-longitudinal,7-horizontal”pattern),macroscopically make up a“chessboard tectonic system”medium-weak deformation region in the geomechanical tectonic system.They are also the main geological constraints for the crustal stability of the YREB.
基金the Ministry of Science and Technology of China(G2000046704).
文摘Offshore active faults, especially those in the deep sea, are very difficultto study because of the water and sedimentary cover. To characterize the nature and geometry ofoffshore active faults, a combination of methods must be employed. Generally, seismic profiling isused to map these faults, but often only fault-related folds rather than fracture planes are imaged.Multi-beam swath bathymetry provides information on the structure and growth history of a faultbecause movements of an active fault are reflected in the bottom morphology. Submersible anddeep-tow surveys allow direct observations of deformations on the seafloor (including fracture zonesand microstructures). In the deep sea, linearly aligned cold seep communities provide indirectevidence for active faults and the spatial migration of their activities. The Western Sagami Bayfault (WSBF) in the western Sagami Bay off central Japan is an active fault that has been studied indetail using the above methods. The bottom morphology, fractured breccias directly observed andphotographed, seismic profiles, as well as distribution and migration of cold seep communitiesprovide evidence for the nature and geometry of the fault. Focal mechanism solutions of selectedearthquakes in the western Sagami Bay during the period from 1900 to 1995 show that the maximumcompression trends NW-SE and the minimum stress axis strikes NE-SW, a stress pattern indicating aleft-lateral strike-slip fault.
基金This study granted by the Scientific Foundation of the China Academy of Science, is one of the stage results of the subject (R850835). A symposium of the International Petroleum Geological Conference of Northern South China Sea Continental Shelf, 1987
文摘-On the basis of the data of geophysics and seismic activities, the analyses of the active faults, seismic activities and the sea floor unstable factors of the Zhujiang River Mouth Basin have been made so as to study the characteristics of the compressional subactive continental margin of Cathaysian system, arc littoral strongly active fracture zone, the division of seismic subzone and seismic zone of the continental margin of northern South China Sea, the potential focal area, and to analyze the regional stability. We consider that the Zhujiang River Mouth Basin belongs to a stable or a moderately stable region.
文摘The most common method used to describe earthquake activity is based on the changes in physical parameters of the earth's surface such as displacement of active fault and seismic wave.However,such approach is not successful in forecasting the movement behaviors of faults.In the present study,a new mechanical model of fault activity,considering the shear strength on the fault plane and the influence of the resistance force,is established based on the occurrence condition of earthquake.A remote real-time monitoring system is correspondingly developed to obtain the changes in mechanical components within fault.Taking into consideration the local geological conditions and the history of fault activity in Zhangjiakou of China,an active fault exposed in the region of Zhangjiakou is selected to be directly monitored by the real-time monitoring technique.A thorough investigation on local fault structures results in the selection of two suitable sites for monitoring potential active tectonic movements of Zhangjiakou fault.Two monitoring curves of shear strength,recorded during a monitoring period of 6 months,turn out to be steady,which indicates that the potential seismic activities hardly occur in the adjacent region in the near future.This monitoring technique can be used for early-warning prediction of the movement of active fault,and can help to further gain an insight into the interaction between fault activity and relevant mechanisms.
文摘It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City”, started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions ：
基金supported by the Key Project of Chinese Programs for Fundamental Research and Development (2004CB418406)
文摘The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.
基金supported by the grant of China Ocean Mineral Resources R&D Association(DY135-S2-1-01)
文摘Fracture-fissure systems found at mid-ocean ridges are dominating conduits for the circulation of metallogenic fluid.Ascertaining the distribution area of active faults on both sides of mid-ocean ridges will provide a useful tool in the search for potential hydrothermal vents,thus guiding the exploration of modern seafloor sulfides.Considering the MidAtlantic Ridge 20°N–24°N(NMAR)and North Chile Rise(NCR)as examples,fault elements such as Fault Spacing(?S)and Fault Heave(?X)can be identified and quantitatively measured.The methods used include Fourier filtering of the multi-beam bathymetry data,in combination with measurements of the topographic slope,curvature,and slope aspect patterns.According to the Sequential Faulting Model of mid-ocean ridges,the maximal migration distance of an active fault on either side of mid-ocean ridges—that is,the distribution range of active faults—can be measured.Results show that the maximal migration distance of active faults at the NMAR is 0.76–1.01 km(the distance is larger at the center than at the ends of this segment),and at the NCR,the distribution range of active faults is 0.38–1.6 km.The migration distance of active faults on the two study areas is positively related to the axial variation of magma supply.In the NCR study area,where there is an abundant magma input,the number of faults within a certain distance is mainly affected by the variation of lithospheric thickness.Here a large range of faulting clearly corresponds to a high proportion of magmatism to seafloor spreading near mid-ocean ridges(M)value,and in the study area of the NMAR,there is insufficient magmatism,and the number of faults may be controlled by both lithospheric thickness and magma supply,leading to a less obvious positive correlation between the distribution range of active faults and M.
基金State Key Basic Research Development and Programming Project (G19980407-04) and the Project during the ninth Five-Year Plan of Gansu Province (GK973-2-110A).
文摘Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China
文摘Marine active fault exploration and paleoearthquake research are still a gap in China. The paper gives a review on major research methods and new progress made abroad, including submarine survey boat, seismic reflection and acoustic reflection. Through detailed studies of offset history of 10 ka to 30 ka, it is possible to determine paleoearthquake recurrent intervals and elapsed time since last major earthquake. It is suggested that active fault exploration can be carried out by acoustic exploring method in large earthquake region of Bohai Sea. Paleoearthquake activity history can be revealed and earthquake risk in the future can be predicted.
文摘Active faults in Quaternary unconsolidated sediments are important indicators to determine paleoearthquake events. They can be studied by macroscopic geological survey, but some problems have been encountered, such as invisible active faults. The authors found an approach to solve these problems by microstructural observation. Firstly, oriented original-state samples of Quaternary unconsolidated sediments in active fault zones are collected. Secondly, the samples are consolidated in laboratory. Thirdly, microstructural slides are ground in three-dimension coordinate system. Lastly, microstructures are observed in the microscopic field. By this method, the movement properties of active faults can be determined in lack of the support of macroscopic data. The invisible faults in Quaternary unconsolidated sediments can be found and described. The mechanisms of die-out faults can be also studied. Moreover, the boundaries between different unconsolidated sediments in engineering sites can be studied to judge whether they are active faults or not.
文摘The depth of upper fault point is the key data for ascertaining the active age of a buried fault on a plain. The difference of depth obtained from same fault may be dozens to several hundred meters when using different geophysical methods. It can result in the absolutely opposite conclusions when judging fault activity. Because of a lack of an artificial earthquake source with wide band and high central frequency, many kinds of methods have to be used together. The higher the frequency of the artificial earthquake wave, electromagnetic wave and sonic wave, the higher the resolution. However the attenuation is also very fast and the exploration depth is very shallow. The reverse is also true. The frequency of artificial seismic waves is in the tens of Hz. Its exploration depth is big and the resolution is poor. The frequency of radar electromagnetic waves is about a million Hz, indicating that the resolving power is better, but the exploration depth is very shallow. However, the acoustic frequency is thousands of Hz, its resolving power is better than that of the artificial earthquake method and the exploration depth is larger than that of the radar method. So it is suitable for extra shallow exploration in the thick deposit strata of the Quaternary. The preliminary results detected using the high frequency acoustic method in extra shallow layers indicates that previous inferences about some fault activity in the eastern part of the North China plain may need to be greatly corrected.
