A theoretical system has been developed to simulate the control of rotating stall. Circulating disturbance was appended to the system to suppress the developing of rotating wave. The control system has slight influenc...A theoretical system has been developed to simulate the control of rotating stall. Circulating disturbance was appended to the system to suppress the developing of rotating wave. The control system has slight influence on the systems critical B coefficient B cr . Self adaptive sector has been inserted into the proportion feed back control system to fit the nonlinear compressor system.展开更多
The transientbehaviorofisotropic and hom ogeneousplateshasbeen a subjectofinterest. Thepresentinvestigation isconcerned w ith the largedeflection transientanalysisand controlofplates w ith piezoelectricsensorsand ac...The transientbehaviorofisotropic and hom ogeneousplateshasbeen a subjectofinterest. Thepresentinvestigation isconcerned w ith the largedeflection transientanalysisand controlofplates w ith piezoelectricsensorsand actuatorsunderapplied transverse loads. In this paper, the increm ental finite elem entequationsconsidering thegeom etricnonlinearity ofpiezoelectricsm artstructuresarede- veloped based on TotalLagrange approach by using the virtualvelocity increm entalvariationalprinci- ples. A four-node Mindlin plate elem ent w ith reduced and selective integration is adopted. The re- sulting increm entequationsare solved by using New m ark'sdirectintegration approach. Transientre- sponse ofplatesw ith piezoelectricsensorsand actuators subjected to transverse dynam ic loading isin- vestigated. The active dam ping isintroduced on the platesby coupling a negativevelocity feedback al- gorithm in a closed controlloop. The num ericalresults show thatpiezoelectric actuators can produce significant dam ping and suppress transient vibration effectively. Finally, the effects of the num ber and locations ofthe piezoelectric actuatorson the controlsystem are also investigated.展开更多
This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relativ...This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.展开更多
Pump valve pipeline vibration brings serious safety hazards to the operation of the equipment,for the pump valve system in the process of variable flow,variable speed,variable openings lead to excessive pipeline vibra...Pump valve pipeline vibration brings serious safety hazards to the operation of the equipment,for the pump valve system in the process of variable flow,variable speed,variable openings lead to excessive pipeline vibration.An active damping device(ADD)is used to the vibration of the pump valve pipeline system to apply the control force,to achieve the active control of the pipeline vibration.A pump-valve pipeline vibration test bench was built to compare the control effect of active damping device on pipeline vibration under different pump valve working conditions,and the results show that applying ADD control could effectively suppress the vibration of the pump valve pipeline and enhance the stability of the equipment during operation.At different pump operating rotation frequencies,the vibration amplitude of the pump valve pipeline in working frequency and its multiple frequencies are also effectively suppressed,with the maximum amplitude reduction of more than 60%.For the valve vibration caused by different operating openings,the vibration of the highest reduction of 68%,and the centrifugal pump drive shaft vi-bration reduced by up to 73%,which provides a new idea for vibration control of pump valve pipeline system.展开更多
Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical...Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical arms.The performance of the servo drive,which encompasses the response to the torque,efficiency,control bandwidth and the steady-state positioning accuracy,significantly influences the performance of the aviation actuation.Consequently,enhancing the control bandwidth and refining the positioning accuracy of aviation electro-mechanical actuation servo drives have emerged as a focal point of research.This paper investigates the multi-source disturbances present in aviation electro-mechanical actuation servo systems and summarizes recent research on high-performance servo control methods based on active disturbance rejection control(ADRC).We present a comprehensive overview of the research status pertaining to servo control architecture,strategies for suppressing disturbances in the current loop,and ADRC-based strategies for the position loop.We delineate the research challenges and difficulties encountered by aviation electro-mechanical actuation servo drive control technology.展开更多
The conventional feedforward hybrid active noise control(FFHANC)system combines the advantages of the feedforward narrowband active noise control(FFNANC)system and the feedforward broadband active noise control(FFBANC...The conventional feedforward hybrid active noise control(FFHANC)system combines the advantages of the feedforward narrowband active noise control(FFNANC)system and the feedforward broadband active noise control(FFBANC)system.To enhance its adaptive adjustment capability under frequency mismatch(FM)conditions,this paper introduces a narrowband frequency adaptive estimation module into the conventional FFHANC system.This module integrates an autoregressive(AR)model and a linear cascaded adaptive notch filter(LCANF),enabling accurate reference signal frequency estimation even under significant FM.Furthermore,in order to improve the coherence between narrowband and broadband components in the system’s error signal and its corresponding control filter for the conventional FFHANC system,this paper proposes an algorithm based on autoregressive bandpass filter bank(AR-BPFB)for error separation.Simulation results demonstrate that the proposed FFHANC system maintains robust performance under high FM conditions and effectively suppresses hybrid-band noise.The AR-BPFB algorithm significantly elevates the convergence speed of the FFHANC system.展开更多
A theoretical analysis regarding active vibration control of rotating machines with current-controlled electrodynamic actuators between machine feet and steel frame foundation and with velocity feedback of the machine...A theoretical analysis regarding active vibration control of rotating machines with current-controlled electrodynamic actuators between machine feet and steel frame foundation and with velocity feedback of the machine feet vibrations is presented.First,a generalized mathematical formulation is derived based on a state-space description which can be used for different kinds of models(1D,2D,and 3D models).It is shown that under special boundary conditions,the control parameters can be directly implemented into the stiffness and damping matrices of the system.Based on the generalized mathematical formulation,an example of a rotating machine—described by a 2D model—with journal bearings,flexible rotor,current-controlled electrodynamic actuators,steel frame foundation,and velocity feedback of the machine feet vibrations is presented where the effectiveness of the described active vibration control system is demonstrated.展开更多
Activeow control technology is a technique that controls the internaloweld of aircraft engines or theoweld around wings by means of disturbances induced by actuators,and adjusts the aerodynamic force and attitude of t...Activeow control technology is a technique that controls the internaloweld of aircraft engines or theoweld around wings by means of disturbances induced by actuators,and adjusts the aerodynamic force and attitude of the aircraft,so as to achieve the purposes of increasing lift,reducing drag,suppressing vibration and reducing noise.Hailed as an important source of innovative development for aircraft,this technology provides a new technical approach to solve the aerodynamic problems of aircraft,signicantly improve their comprehensive performance,break throughight boundaries,and promote disruptive innovation in the next generation of aircraft.展开更多
The study of Mecanum mobile robots typically assumes motion on planar surfaces,while the challenges posed by inclined terrains remain largely unexplored,leaving a significant gap in control applications for such scena...The study of Mecanum mobile robots typically assumes motion on planar surfaces,while the challenges posed by inclined terrains remain largely unexplored,leaving a significant gap in control applications for such scenarios.In this context,two critical issues emerge:the gravitational pull caused by adding a potential energy term in the robot dynamics,which drives the vehicle downhill,and several positioning errors due to vibrations and slippage of the Mecanum wheel.To address these challenges,this work presents an Active Disturbance Rejection Control(ADRC)-based framework designed to enable accurate tracking on inclined surfaces,despite the compounded effects of gravitational forces and slippage.Unlike conventional controllers,the proposed method requires minimal model knowledge while actively compensates for unknown dynamics and external disturbances in real time.A complete theoretical formulation is provided,supported by numerical simulations and comprehensive experimental validation.Results demonstrate that the ADRC structure significantly outperforms not only the traditional proportional-integral-derivative(PID)control but also a robust variant of PID combined with a Quasi-Sliding Mode control(PID-QSMC)strategy,achieving superior tracking.Notably,this study offers an important experimental validation of ADRC for Mecanum-wheeled robots operating on inclined surfaces.It contributes a practical and scalable solution to extend their operational capabilities beyond flat environments.展开更多
This paper investigates the active traveling wave vibration control of an elastic supported rotating porous aluminium conical shell(CS)under impact loading.Piezoelectric smart materials in the form of micro fiber comp...This paper investigates the active traveling wave vibration control of an elastic supported rotating porous aluminium conical shell(CS)under impact loading.Piezoelectric smart materials in the form of micro fiber composites(MFCs)are used as actuators and sensors.To this end,a metal pore truncated CS with MFCs attached to its surface is considered.Adding artificial virtual springs at two edges of the truncated CS achieves various elastic supported boundaries by changing the spring stiffness.Based on the first-order shear deformation theory(FSDT),minimum energy principle,and artificial virtual spring technology,the theoretical formulations considering the electromechanical coupling are derived.The comparison of the natural frequency of the present results with the natural frequencies reported in previous literature evaluates the accuracy of the present approach.To study the vibration control,the integral quadrature method in conjunction with the differential quadrature approximation in the length direction is used to discretize the partial differential dynamical system to form a set of ordinary differential equations.With the aid of the velocity negative feedback method,both the time history and the input control voltage on the actuator are demonstrated to present the effects of velocity feedback gain,pore distribution type,semi-vertex angle,impact loading,and rotational angular velocity on the traveling wave vibration control.展开更多
Aiming at the sensitivity of linear active disturbance rejection control(LADRC)to measurement noise,an improved anti-saturation cascaded LADRC is proposed.This approach employs the system output as the control input o...Aiming at the sensitivity of linear active disturbance rejection control(LADRC)to measurement noise,an improved anti-saturation cascaded LADRC is proposed.This approach employs the system output as the control input of the filtering subsystem,which is then fed back to the secondary LADRC to mitigate measurement noise and uncertain disturbances.While preserving the benefits of precise and stable tracking inherent to traditional cascaded LADRC closed-loop systems,this design omits the outer loop tracking differentiator,thereby simplifying the structure and reducing the number of tunable parameters.Additionally,an error compensation strategy is introduced to address input saturation constraints,thereby equipping the controller with anti-saturation capabilities.Under multi-track surface switching conditions,the effectiveness of the new cascaded active disturbance rejection method is verified by simulation of the optimal adhesion control of the railway train.The results show that the improved cascaded LADRC has stronger rapidity and robustness.展开更多
To enhance the low-voltage ride-through(LVRT)capability of emerging power systems with increasing penetration of renewable energy while addressing issues such as the slow response speed of traditional proportional-int...To enhance the low-voltage ride-through(LVRT)capability of emerging power systems with increasing penetration of renewable energy while addressing issues such as the slow response speed of traditional proportional-integral(PI)control,high model accuracy requirements,and complex system parameter tuning,this paper proposes a droop-controlled converter reactive power support strategy based on first-order linear active disturbance rejection control(LADRC).First,a mathematical model of a droop-controlled grid-forming(GFM)converter is established.A model equivalence method is then proposed to transform the dynamic characteristics of the control loop into equivalent impedance parameters.Based on the equivalent impedance parameter model,the influencing factors of the converter terminal voltage and point of common coupling(PCC)voltage are derived.Next,a first-order linear active disturbance rejection control strategy is introduced into the traditional droop control framework,and the controller parameters are optimized via the bandwidth tuning method.Finally,a simulation model of the droop-controlled GFM converter based on the linear active disturbance rejection controller is constructed on the PSCAD/EMTDC platform,and through comparative experiments under typical grid fault conditions,the effectiveness of the proposed control strategy in improving the system fault ride-through capability and voltage support is verified.展开更多
With the growing adoption of artificial intelligence algorithms and neural networks,online learning and adaptive methods for updating the bandwidth have become increasingly prevalent.However,the conditions required to...With the growing adoption of artificial intelligence algorithms and neural networks,online learning and adaptive methods for updating the bandwidth have become increasingly prevalent.However,the conditions required to ensure closed-loop stability when employing a time-varying bandwidth,as well as the supporting mathematical foundations,remain insufficiently studied.This paper investigates the stability condition for active disturbance rejection control(ADRC)with a time-varying bandwidth extended state observer(ESO).A new stability condition is derived,which means that the upper bound of rate of change for ESO bandwidth should be restricted.Moreover,under the proposed condition,the closed-loop stability of ADRC with a time-varying bandwidth observer is rigorously proved for nonlinear uncertainties.In simulations,the necessity of the proposed condition is illustrated,demonstrating that the rate of change of ESO bandwidth is crucial for closed-loop stability.展开更多
Dear Editor,Active magnetic bearings(AMBs)are of considerable interest and significance in smart manufacturing due to their zero-friction and adaptivity to noncontact rotor rotations.This paper proposes an active levi...Dear Editor,Active magnetic bearings(AMBs)are of considerable interest and significance in smart manufacturing due to their zero-friction and adaptivity to noncontact rotor rotations.This paper proposes an active levitation control algorithm based on adaptive sliding mode control(ASMC)equipped with linear extended state observer(LESO).Sufficient conditions are derived to guarantee the asymptotical stability of the associated closed-loop system.Experiments are conducted on a real AMB-rotor platform to demonstrate the effectiveness and superiority of the proposed algorithm.展开更多
The objective of this paper is to present a robust safety-critical control system based on the active disturbance rejection control approach, designed to guarantee safety even in the presence of model inaccuracies, un...The objective of this paper is to present a robust safety-critical control system based on the active disturbance rejection control approach, designed to guarantee safety even in the presence of model inaccuracies, unknown dynamics, and external disturbances. The proposed method combines control barrier functions and control Lyapunov functions with a nonlinear extended state observer to produce a robust and safe control strategy for dynamic systems subject to uncertainties and disturbances. This control strategy employs an optimization-based control, supported by the disturbance estimation from a nonlinear extended state observer. Using a quadratic programming algorithm, the controller computes an optimal, stable, and safe control action at each sampling instant. The effectiveness of the proposed approach is demonstrated through numerical simulations of a safety-critical interconnected adaptive cruise control system.展开更多
This paper investigates the high-performance control issues of systems affected by time-varying disturbances and measurement noise.Conventionally,active disturbance rejection control(ADRC)is a favorable control strate...This paper investigates the high-performance control issues of systems affected by time-varying disturbances and measurement noise.Conventionally,active disturbance rejection control(ADRC)is a favorable control strategy to reject unknown disturbances and uncertainties.However,its control performance is limited because standard extended state observer(ESO)struggles to effectively estimate time-varying disturbances.The emergence of high-order ESO(HESO)alleviates the limitation.Unfortunately,it deteriorates the noise suppression capability when the disturbance rejection is enhanced.To tackle this challenge,an improved ADRC with cascade HESO(CHESO)is proposed.A comprehensive theoretical analysis associated with the performance of HESO is given for the first time.The presented analyses provide an intuitive understanding of the performance of HESO.Then,a novel CHESO is developed.The convergence of CHESO is proved via input-to-state stable theory.Extensive frequency domain analyses indicate that CHESO has stronger disturbance rejection and high-frequency noise attenuation performance than ESO and HESO without increasing the observer bandwidth.Comparative simulations conducted on a servo control system validate the effectiveness and preponderance of the proposed method.展开更多
During the startup of the hydraulic turbine generators,the hybrid magnetic bearing support system exhibits displacement fluctuations,and the nonlinearity and strong coupling characteristics of the magnetic bearings li...During the startup of the hydraulic turbine generators,the hybrid magnetic bearing support system exhibits displacement fluctuations,and the nonlinearity and strong coupling characteristics of the magnetic bearings limit the accuracy of rotor modeling,making traditional control methods difficult to adapt to parameter variations.To suppress startup disturbances and achieve a control strategy with low computational complexity and high precision,this paper proposes a five-degree-of-freedom hybrid magnetic bearing control strategy based on an improved cascaded reduced-order linear active disturbance rejection controller(CRLADRC).The front-stage reduced-order linear extended state observer(FRLESO)reduces the system’s computational complexity,enabling the system to maintain stability during motor startup disturbances.The second-stage reduced-order linear extended state observer(SRLESO)further enhances the system’s disturbance estimation accuracy while maintaining low computational complexity.Furthermore,the disturbance rejection and noise suppression capabilities are analyzed in the frequency domain and the stability of the proposed control method is proven using Lyapunov theory.Experimental results indicate that the proposed strategy effectively reduces displacement fluctuations in the hybrid magnetic bearing support system during motor startup,significantly enhancing the system’s robustness.展开更多
This paper aims to fuse two well-established and,at the same time,opposed control techniques,namely,model predictive control(MPC)and active disturbance rejection control(ADRC),to develop a dynamic motion controller fo...This paper aims to fuse two well-established and,at the same time,opposed control techniques,namely,model predictive control(MPC)and active disturbance rejection control(ADRC),to develop a dynamic motion controller for a laser beam steering system.The proposed technique uses the ADRC philosophy to lump disturbances and model uncertainties into a total disturbance.Then,the total disturbance is estimated via a discrete extended state disturbance observer(ESO),and it is used to(1)handle the system constraints in a quadratic optimization problem and(2)injected as a feedforward term to the plant to reject the total disturbance,together with the feedback term obtained by the MPC.The main advantage of the proposed approach is that the MPC is designed based on a straightforward integrator-chain model such that a simple convex optimization problem is performed.Several experiments show the real-time closed-loop performance regarding trajectory tracking and disturbance rejection.Owing to simplicity,the self-contained approach MPC+ESO becomes a Frugal MPC,which is computationally economical,adaptable,efficient,resilient,and suitable for applications where on-board computational resources are limited.展开更多
This paper presents a novel active disturbance rejection control(ADRC)scheme based on a cascade connection of generalized proportional integral observers(GPIOs)with internal models designed to estimate both polynomial...This paper presents a novel active disturbance rejection control(ADRC)scheme based on a cascade connection of generalized proportional integral observers(GPIOs)with internal models designed to estimate both polynomial and resonant disturbances.In this estimator structure,referred to as Cascade GPIO(CGPIO),the total disturbance sensitivity is the product of the sensitivities at each cascade level.This approach improves system performance against both periodic and non-periodic disturbances and enhances robustness under frequency variations in harmonic components.Additionally,the decoupled nature of the estimator reduces the order of the GPIOs,thereby simplifying tuning and limiting observer gains.The proposed control scheme is supported by a frequency-domain analysis and is experimentally validated in the current control of a grid-connected converter subject to control gain uncertainties,harmonic distortion,frequency deviations,and measurement noise.Experimental results demonstrate that the CGPIO-based ADRC outperforms benchmark solutions,including proportional-integral(PI)and proportional-resonant(PR)controllers.展开更多
Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency devia...Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.展开更多
文摘A theoretical system has been developed to simulate the control of rotating stall. Circulating disturbance was appended to the system to suppress the developing of rotating wave. The control system has slight influence on the systems critical B coefficient B cr . Self adaptive sector has been inserted into the proportion feed back control system to fit the nonlinear compressor system.
文摘The transientbehaviorofisotropic and hom ogeneousplateshasbeen a subjectofinterest. Thepresentinvestigation isconcerned w ith the largedeflection transientanalysisand controlofplates w ith piezoelectricsensorsand actuatorsunderapplied transverse loads. In this paper, the increm ental finite elem entequationsconsidering thegeom etricnonlinearity ofpiezoelectricsm artstructuresarede- veloped based on TotalLagrange approach by using the virtualvelocity increm entalvariationalprinci- ples. A four-node Mindlin plate elem ent w ith reduced and selective integration is adopted. The re- sulting increm entequationsare solved by using New m ark'sdirectintegration approach. Transientre- sponse ofplatesw ith piezoelectricsensorsand actuators subjected to transverse dynam ic loading isin- vestigated. The active dam ping isintroduced on the platesby coupling a negativevelocity feedback al- gorithm in a closed controlloop. The num ericalresults show thatpiezoelectric actuators can produce significant dam ping and suppress transient vibration effectively. Finally, the effects of the num ber and locations ofthe piezoelectric actuatorson the controlsystem are also investigated.
文摘This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.
基金The Fundamental Research Funds for the Central Universities(JD2423)。
文摘Pump valve pipeline vibration brings serious safety hazards to the operation of the equipment,for the pump valve system in the process of variable flow,variable speed,variable openings lead to excessive pipeline vibration.An active damping device(ADD)is used to the vibration of the pump valve pipeline system to apply the control force,to achieve the active control of the pipeline vibration.A pump-valve pipeline vibration test bench was built to compare the control effect of active damping device on pipeline vibration under different pump valve working conditions,and the results show that applying ADD control could effectively suppress the vibration of the pump valve pipeline and enhance the stability of the equipment during operation.At different pump operating rotation frequencies,the vibration amplitude of the pump valve pipeline in working frequency and its multiple frequencies are also effectively suppressed,with the maximum amplitude reduction of more than 60%.For the valve vibration caused by different operating openings,the vibration of the highest reduction of 68%,and the centrifugal pump drive shaft vi-bration reduced by up to 73%,which provides a new idea for vibration control of pump valve pipeline system.
基金supported by the National Natural Science Foundation of China(Nos.52177059 and 52407064).
文摘Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical arms.The performance of the servo drive,which encompasses the response to the torque,efficiency,control bandwidth and the steady-state positioning accuracy,significantly influences the performance of the aviation actuation.Consequently,enhancing the control bandwidth and refining the positioning accuracy of aviation electro-mechanical actuation servo drives have emerged as a focal point of research.This paper investigates the multi-source disturbances present in aviation electro-mechanical actuation servo systems and summarizes recent research on high-performance servo control methods based on active disturbance rejection control(ADRC).We present a comprehensive overview of the research status pertaining to servo control architecture,strategies for suppressing disturbances in the current loop,and ADRC-based strategies for the position loop.We delineate the research challenges and difficulties encountered by aviation electro-mechanical actuation servo drive control technology.
基金supported in part by the Postgraduate Research&Practice Innovation Program of Nanjing University of Aeronautics and Astronautics(No.xcxjh20240326).
文摘The conventional feedforward hybrid active noise control(FFHANC)system combines the advantages of the feedforward narrowband active noise control(FFNANC)system and the feedforward broadband active noise control(FFBANC)system.To enhance its adaptive adjustment capability under frequency mismatch(FM)conditions,this paper introduces a narrowband frequency adaptive estimation module into the conventional FFHANC system.This module integrates an autoregressive(AR)model and a linear cascaded adaptive notch filter(LCANF),enabling accurate reference signal frequency estimation even under significant FM.Furthermore,in order to improve the coherence between narrowband and broadband components in the system’s error signal and its corresponding control filter for the conventional FFHANC system,this paper proposes an algorithm based on autoregressive bandpass filter bank(AR-BPFB)for error separation.Simulation results demonstrate that the proposed FFHANC system maintains robust performance under high FM conditions and effectively suppresses hybrid-band noise.The AR-BPFB algorithm significantly elevates the convergence speed of the FFHANC system.
文摘A theoretical analysis regarding active vibration control of rotating machines with current-controlled electrodynamic actuators between machine feet and steel frame foundation and with velocity feedback of the machine feet vibrations is presented.First,a generalized mathematical formulation is derived based on a state-space description which can be used for different kinds of models(1D,2D,and 3D models).It is shown that under special boundary conditions,the control parameters can be directly implemented into the stiffness and damping matrices of the system.Based on the generalized mathematical formulation,an example of a rotating machine—described by a 2D model—with journal bearings,flexible rotor,current-controlled electrodynamic actuators,steel frame foundation,and velocity feedback of the machine feet vibrations is presented where the effectiveness of the described active vibration control system is demonstrated.
文摘Activeow control technology is a technique that controls the internaloweld of aircraft engines or theoweld around wings by means of disturbances induced by actuators,and adjusts the aerodynamic force and attitude of the aircraft,so as to achieve the purposes of increasing lift,reducing drag,suppressing vibration and reducing noise.Hailed as an important source of innovative development for aircraft,this technology provides a new technical approach to solve the aerodynamic problems of aircraft,signicantly improve their comprehensive performance,break throughight boundaries,and promote disruptive innovation in the next generation of aircraft.
文摘The study of Mecanum mobile robots typically assumes motion on planar surfaces,while the challenges posed by inclined terrains remain largely unexplored,leaving a significant gap in control applications for such scenarios.In this context,two critical issues emerge:the gravitational pull caused by adding a potential energy term in the robot dynamics,which drives the vehicle downhill,and several positioning errors due to vibrations and slippage of the Mecanum wheel.To address these challenges,this work presents an Active Disturbance Rejection Control(ADRC)-based framework designed to enable accurate tracking on inclined surfaces,despite the compounded effects of gravitational forces and slippage.Unlike conventional controllers,the proposed method requires minimal model knowledge while actively compensates for unknown dynamics and external disturbances in real time.A complete theoretical formulation is provided,supported by numerical simulations and comprehensive experimental validation.Results demonstrate that the ADRC structure significantly outperforms not only the traditional proportional-integral-derivative(PID)control but also a robust variant of PID combined with a Quasi-Sliding Mode control(PID-QSMC)strategy,achieving superior tracking.Notably,this study offers an important experimental validation of ADRC for Mecanum-wheeled robots operating on inclined surfaces.It contributes a practical and scalable solution to extend their operational capabilities beyond flat environments.
基金Supported by the National Natural Science Foundation of China(Nos.12272056 and 11832002)。
文摘This paper investigates the active traveling wave vibration control of an elastic supported rotating porous aluminium conical shell(CS)under impact loading.Piezoelectric smart materials in the form of micro fiber composites(MFCs)are used as actuators and sensors.To this end,a metal pore truncated CS with MFCs attached to its surface is considered.Adding artificial virtual springs at two edges of the truncated CS achieves various elastic supported boundaries by changing the spring stiffness.Based on the first-order shear deformation theory(FSDT),minimum energy principle,and artificial virtual spring technology,the theoretical formulations considering the electromechanical coupling are derived.The comparison of the natural frequency of the present results with the natural frequencies reported in previous literature evaluates the accuracy of the present approach.To study the vibration control,the integral quadrature method in conjunction with the differential quadrature approximation in the length direction is used to discretize the partial differential dynamical system to form a set of ordinary differential equations.With the aid of the velocity negative feedback method,both the time history and the input control voltage on the actuator are demonstrated to present the effects of velocity feedback gain,pore distribution type,semi-vertex angle,impact loading,and rotational angular velocity on the traveling wave vibration control.
基金supported by the State Key Laboratory of Heavy-duty and Express High-power Electric Locomotive open project(Grant No.QZKFKT2023-012).
文摘Aiming at the sensitivity of linear active disturbance rejection control(LADRC)to measurement noise,an improved anti-saturation cascaded LADRC is proposed.This approach employs the system output as the control input of the filtering subsystem,which is then fed back to the secondary LADRC to mitigate measurement noise and uncertain disturbances.While preserving the benefits of precise and stable tracking inherent to traditional cascaded LADRC closed-loop systems,this design omits the outer loop tracking differentiator,thereby simplifying the structure and reducing the number of tunable parameters.Additionally,an error compensation strategy is introduced to address input saturation constraints,thereby equipping the controller with anti-saturation capabilities.Under multi-track surface switching conditions,the effectiveness of the new cascaded active disturbance rejection method is verified by simulation of the optimal adhesion control of the railway train.The results show that the improved cascaded LADRC has stronger rapidity and robustness.
基金supported by the Smart Grid-National Science and Technology Major Project(No.2024ZD0801400)the Science and Technology Projects of State Grid Corporation of China(No.52272224000V).
文摘To enhance the low-voltage ride-through(LVRT)capability of emerging power systems with increasing penetration of renewable energy while addressing issues such as the slow response speed of traditional proportional-integral(PI)control,high model accuracy requirements,and complex system parameter tuning,this paper proposes a droop-controlled converter reactive power support strategy based on first-order linear active disturbance rejection control(LADRC).First,a mathematical model of a droop-controlled grid-forming(GFM)converter is established.A model equivalence method is then proposed to transform the dynamic characteristics of the control loop into equivalent impedance parameters.Based on the equivalent impedance parameter model,the influencing factors of the converter terminal voltage and point of common coupling(PCC)voltage are derived.Next,a first-order linear active disturbance rejection control strategy is introduced into the traditional droop control framework,and the controller parameters are optimized via the bandwidth tuning method.Finally,a simulation model of the droop-controlled GFM converter based on the linear active disturbance rejection controller is constructed on the PSCAD/EMTDC platform,and through comparative experiments under typical grid fault conditions,the effectiveness of the proposed control strategy in improving the system fault ride-through capability and voltage support is verified.
基金supported partially by the National Natural Science Foundation(No.62473344)the T-Flight Laboratory in ShanXi Provincial(No.GSFC2024NBKY05)+1 种基金the Natural Science Basic Research Program of Shaanxi(No.2025JC-YBQN-035)the National Natural Science Foundation of China(Grant No.92471204).
文摘With the growing adoption of artificial intelligence algorithms and neural networks,online learning and adaptive methods for updating the bandwidth have become increasingly prevalent.However,the conditions required to ensure closed-loop stability when employing a time-varying bandwidth,as well as the supporting mathematical foundations,remain insufficiently studied.This paper investigates the stability condition for active disturbance rejection control(ADRC)with a time-varying bandwidth extended state observer(ESO).A new stability condition is derived,which means that the upper bound of rate of change for ESO bandwidth should be restricted.Moreover,under the proposed condition,the closed-loop stability of ADRC with a time-varying bandwidth observer is rigorously proved for nonlinear uncertainties.In simulations,the necessity of the proposed condition is illustrated,demonstrating that the rate of change of ESO bandwidth is crucial for closed-loop stability.
基金supported in part by the National Natural Science Foundation of China(62225306,U2141235,52188102).
文摘Dear Editor,Active magnetic bearings(AMBs)are of considerable interest and significance in smart manufacturing due to their zero-friction and adaptivity to noncontact rotor rotations.This paper proposes an active levitation control algorithm based on adaptive sliding mode control(ASMC)equipped with linear extended state observer(LESO).Sufficient conditions are derived to guarantee the asymptotical stability of the associated closed-loop system.Experiments are conducted on a real AMB-rotor platform to demonstrate the effectiveness and superiority of the proposed algorithm.
基金supported by the Fondo para el Primer Proyecto of the Comitépara el Desarrollo de la Investigación(CODI)at the Universidad de Antioquia(Grant Number PRV2024-78509)。
文摘The objective of this paper is to present a robust safety-critical control system based on the active disturbance rejection control approach, designed to guarantee safety even in the presence of model inaccuracies, unknown dynamics, and external disturbances. The proposed method combines control barrier functions and control Lyapunov functions with a nonlinear extended state observer to produce a robust and safe control strategy for dynamic systems subject to uncertainties and disturbances. This control strategy employs an optimization-based control, supported by the disturbance estimation from a nonlinear extended state observer. Using a quadratic programming algorithm, the controller computes an optimal, stable, and safe control action at each sampling instant. The effectiveness of the proposed approach is demonstrated through numerical simulations of a safety-critical interconnected adaptive cruise control system.
基金supported by the National Natural Science Foundation of China(62203222)the Science and Technology Major Project of Jiangsu Province(BG2024041)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_0676).
文摘This paper investigates the high-performance control issues of systems affected by time-varying disturbances and measurement noise.Conventionally,active disturbance rejection control(ADRC)is a favorable control strategy to reject unknown disturbances and uncertainties.However,its control performance is limited because standard extended state observer(ESO)struggles to effectively estimate time-varying disturbances.The emergence of high-order ESO(HESO)alleviates the limitation.Unfortunately,it deteriorates the noise suppression capability when the disturbance rejection is enhanced.To tackle this challenge,an improved ADRC with cascade HESO(CHESO)is proposed.A comprehensive theoretical analysis associated with the performance of HESO is given for the first time.The presented analyses provide an intuitive understanding of the performance of HESO.Then,a novel CHESO is developed.The convergence of CHESO is proved via input-to-state stable theory.Extensive frequency domain analyses indicate that CHESO has stronger disturbance rejection and high-frequency noise attenuation performance than ESO and HESO without increasing the observer bandwidth.Comparative simulations conducted on a servo control system validate the effectiveness and preponderance of the proposed method.
基金supported by the National Natural Science Foundation of China under Grant 52302458the CAS Project for Young Scientists in Basic Research,Grant No.YSBR-045.
文摘During the startup of the hydraulic turbine generators,the hybrid magnetic bearing support system exhibits displacement fluctuations,and the nonlinearity and strong coupling characteristics of the magnetic bearings limit the accuracy of rotor modeling,making traditional control methods difficult to adapt to parameter variations.To suppress startup disturbances and achieve a control strategy with low computational complexity and high precision,this paper proposes a five-degree-of-freedom hybrid magnetic bearing control strategy based on an improved cascaded reduced-order linear active disturbance rejection controller(CRLADRC).The front-stage reduced-order linear extended state observer(FRLESO)reduces the system’s computational complexity,enabling the system to maintain stability during motor startup disturbances.The second-stage reduced-order linear extended state observer(SRLESO)further enhances the system’s disturbance estimation accuracy while maintaining low computational complexity.Furthermore,the disturbance rejection and noise suppression capabilities are analyzed in the frequency domain and the stability of the proposed control method is proven using Lyapunov theory.Experimental results indicate that the proposed strategy effectively reduces displacement fluctuations in the hybrid magnetic bearing support system during motor startup,significantly enhancing the system’s robustness.
基金support through his Master scholarshipThe Vicerrectoría de Investigación y Estudios de Posgrado(VIEP-BUAP)partially funded this work under grant number 00593-PV/2025.
文摘This paper aims to fuse two well-established and,at the same time,opposed control techniques,namely,model predictive control(MPC)and active disturbance rejection control(ADRC),to develop a dynamic motion controller for a laser beam steering system.The proposed technique uses the ADRC philosophy to lump disturbances and model uncertainties into a total disturbance.Then,the total disturbance is estimated via a discrete extended state disturbance observer(ESO),and it is used to(1)handle the system constraints in a quadratic optimization problem and(2)injected as a feedforward term to the plant to reject the total disturbance,together with the feedback term obtained by the MPC.The main advantage of the proposed approach is that the MPC is designed based on a straightforward integrator-chain model such that a simple convex optimization problem is performed.Several experiments show the real-time closed-loop performance regarding trajectory tracking and disturbance rejection.Owing to simplicity,the self-contained approach MPC+ESO becomes a Frugal MPC,which is computationally economical,adaptable,efficient,resilient,and suitable for applications where on-board computational resources are limited.
文摘This paper presents a novel active disturbance rejection control(ADRC)scheme based on a cascade connection of generalized proportional integral observers(GPIOs)with internal models designed to estimate both polynomial and resonant disturbances.In this estimator structure,referred to as Cascade GPIO(CGPIO),the total disturbance sensitivity is the product of the sensitivities at each cascade level.This approach improves system performance against both periodic and non-periodic disturbances and enhances robustness under frequency variations in harmonic components.Additionally,the decoupled nature of the estimator reduces the order of the GPIOs,thereby simplifying tuning and limiting observer gains.The proposed control scheme is supported by a frequency-domain analysis and is experimentally validated in the current control of a grid-connected converter subject to control gain uncertainties,harmonic distortion,frequency deviations,and measurement noise.Experimental results demonstrate that the CGPIO-based ADRC outperforms benchmark solutions,including proportional-integral(PI)and proportional-resonant(PR)controllers.
基金the Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia,for funding this research work through the project number“NBU-FFR-2025-3623-11”.
文摘Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.
