Feasible and accurate acoustic modeling of external and internal aircraft environments is essential for designing low-noise multi-propeller aircraft.This work proposes a novel sound source equivalent approach using Li...Feasible and accurate acoustic modeling of external and internal aircraft environments is essential for designing low-noise multi-propeller aircraft.This work proposes a novel sound source equivalent approach using Lighthill's sound sources(monopole and dipole point sources)for simulating propeller noise.It establishes data transmission interfaces between aerodynamic acoustics and acoustic-solid coupling.Equations are expanded from acoustic pressure to monopole amplitude and dipole moment vector.The basic assumption is that the propeller noise has similar spatial radiation directivity as the sound point source.The radiation relationships are explicitly built between harmonic propeller noise and dipole sources at cabin cross-sections,and between harmonic propeller noise and monopole sources along cabin longitudinal sections.External acoustic pressure distributions of cabin noise are calculated using Unsteady Reynolds-Averaged Navier-Stokes(URANS)and Ffowcs Williams-Hawkings(FW-H)approach.Interior noise is calculated using frequency domain acoustic-solid coupling.Sound source equivalent approach is used to calculate the equivalent intensity of monopole or dipole point sources for external excitation.To assess accuracy of the proposed approach,both external and interior noise of a turboprop aircraft with four sixbladed propellers are calculated and compared against flight trial results of a C-130J-30 Hercules.The turboprop aircraft adopts the same size parameters as the C-130J-30 Hercules.The present frequency domain acoustic approach is accurate for interior cabin noise.It is beneficial for enhancing the design of the low-noise turboprop aircraft.展开更多
Ultrasonic vibration-assisted technology is widely utilized in the performance research and manufacturing process of metallic materials owing to its advantages of introducing highfrequency acoustic systems. However, t...Ultrasonic vibration-assisted technology is widely utilized in the performance research and manufacturing process of metallic materials owing to its advantages of introducing highfrequency acoustic systems. However, the acoustic plasticity constitutive model and potential mechanism, involving Ti3Al intermetallic compounds, have not yet been clarified. Therefore, the Ultrasonic-K-M hybrid acoustic constitutive model of Ti3Al was established by considering the stress superposition, acoustic thermal softening, acoustic softening and acoustic residual hardening effects according to the dislocation density evolution theory and crystal plasticity theory. Meanwhile, the mechanical behavior of ultrasonic vibration-assisted tension(UVAT) and microstructure of ultrasonic vibration-assisted milling(UVAM) for Ti3Al was investigated. Dislocation density to be overcome from initial deformation to failure of Ti3Al was calculated in UVAT and was verified in UVAM. The results indicated that the Ultrasonic-K-M model showed a good agreement with the experimental data. There was an obviously softening phenomenon after introducing the ultrasonic energy field in the Ti3Al whole deformation region, and the degree of softening was positively correlated with amplitude. Furthermore, the maximum reduction ratio in yield strength of Ti3Al was16 % and the maximum reduction value in ultimate tensile strength was 206.91 MPa. The elongation rose first and then fell as amplitude enlarged, but only as the vibration was applied in the whole deformation region, the elongation was always greater than 14.58 %. In addition, The UVAM process significantly reduced the dislocation density increment to be overcome for Ti3Al material removal by 1.37 times, and promoted dislocation motion and cancellation to make twisted dislocations evolve into parallel dislocations. As the amplitude increased to 4 μm, the depth of the disturbed area of the plastic deformation layer increased by a maximum of 2.5 times.展开更多
The design of acoustic models is of vital importance to build a reliable connection between acoustic wave-form and linguistic messages in terms of individual speech units. According to the characteristic of Chinese ph...The design of acoustic models is of vital importance to build a reliable connection between acoustic wave-form and linguistic messages in terms of individual speech units. According to the characteristic of Chinese phonemes, the base acoustic phoneme units set is decided and refined and a decision tree based state tying approach is explored. Since one of the advantages of top-down tying method is flexibility in maintaining a balance between model accuracy and complexity, relevant adjustments are conducted, such as the stopping criterion of decision tree node splitting, during which optimal thresholds are captured. Better results are achieved in improving acoustic modeling accuracy as well as minimizing the scale of the model to a trainable extent.展开更多
The method of numerical analysis is employed to study the resonance mechanism of the lumped parameter system model for acoustic mine detection. Based on the basic principle of the acoustic resonance technique for mine...The method of numerical analysis is employed to study the resonance mechanism of the lumped parameter system model for acoustic mine detection. Based on the basic principle of the acoustic resonance technique for mine detection and the characteristics of low-frequency acoustics, the “soil-mine” system could be equivalent to a damping “mass-spring” resonance model with a lumped parameter analysis method. The dynamic simulation software, Adams, is adopted to analyze the lumped parameter system model numerically. The simulated resonance frequency and anti-resonance frequency are 151 Hz and 512 Hz respectively, basically in agreement with the published resonance frequency of 155 Hz and anti-resonance frequency of 513 Hz, which were measured in the experiment. Therefore, the technique of numerical simulation is validated to have the potential for analyzing the acoustic mine detection model quantitatively. The influences of the soil and mine parameters on the resonance characteristics of the soil–mine system could be investigated by changing the parameter setup in a flexible manner.展开更多
A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The t...A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The two- dimensional intensity distribution and the time evolution of speckles in different probe locations are obtained. The fluctuation of speckle intensity tracks the acoustic-radiation-force shear wave propagation, and especially the reduction of speckle intensity implies attenuation of shear wave. Then, the shear wave velocity is estimated quantitatively on the basis of the time-to-peak algorithm and linear regression processing. The results reveal that a smaller sampling interval yields higher estimation precision and the shear wave velocity is estimated more efficiently by using speckle intensity difference than by using speckle contrast difference according to the estimation error. Hence, the shear wave velocity is estimated to be 2.25 m/s with relatively high accuracy for the estimation error reaches the minimum （0.071）.展开更多
A theoretical model which couples the oscillation of cavitation bubbles with the equation of an acoustic wave is utilized to describe the sound fields in double-layer liquids, which can be used to realize the asymmetr...A theoretical model which couples the oscillation of cavitation bubbles with the equation of an acoustic wave is utilized to describe the sound fields in double-layer liquids, which can be used to realize the asymmetric transmission of acoustic waves. Numerical simulations show that the asymmetry is related to the properties of the host liquids and the input acoustic wave. Asymmetry can be enhanced if the maximum number density or the ambient radius of the cavitation bubbles in the low cavitation threshold liquid increases. Moreover, the direction of rectification will be reversed if the amplitude of the input acoustic wave becomes high enough.展开更多
Underwater acoustic models are effective tools for simulating underwater sound propagation.More than 50 years of research have been conducted on the theory and computational models of sound propagation in the ocean.Un...Underwater acoustic models are effective tools for simulating underwater sound propagation.More than 50 years of research have been conducted on the theory and computational models of sound propagation in the ocean.Unfortunately,underwater sound propagation models were unable to solve practical large-scale three-dimensional problems for many years due to limited computing power and hardware conditions.Since the mid-1980s,research on high performance computing for acoustic propagation models in the field of underwater acoustics has flourished with the emergence of high-performance computing platforms,enabling underwater acoustic propagation models to solve many practical application problems that could not be solved before.In this paper,the contributions of research on high-performance computing for underwater acoustic propagation models since the 1980s are thoroughly reviewed and the possible development directions for the future are outlined.展开更多
A reduced two-fluid model is constructed to investigate the geodesic acoustic mode（GAM）. The ion dynamics is sufficiently considered by including an anisotropic pressure tensor and inhibited heat flux vector, whose ...A reduced two-fluid model is constructed to investigate the geodesic acoustic mode（GAM）. The ion dynamics is sufficiently considered by including an anisotropic pressure tensor and inhibited heat flux vector, whose evolutions are determined by equations derived from the 16-momentum model. Electrons are supposed to obey the Boltzmann distribution responding to the electrostatic oscillation with near ion acoustic velocity. In the large safety factor limit, the GAM frequency is identical with the kinetic one to the order of 1 q2 when zeroing the anisotropy. For general anisotropy, the reduced two-fluid model generates the frequency agreeing well with the kinetic result with arbitrary electron temperature. The present simplified fluid model will be of great use and interest for young researchers and students devoted to plasma physics.展开更多
This paper presents the recognition of “Baoule” spoken sentences, a language of C?te d’Ivoire. Several formalisms allow the modelling of an automatic speech recognition system. The one we used to realize our system...This paper presents the recognition of “Baoule” spoken sentences, a language of C?te d’Ivoire. Several formalisms allow the modelling of an automatic speech recognition system. The one we used to realize our system is based on Hidden Markov Models (HMM) discreet. Our goal in this article is to present a system for the recognition of the Baoule word. We present three classical problems and develop different algorithms able to resolve them. We then execute these algorithms with concrete examples.展开更多
Noise generated by trains running on elevated lines creates many disturbances to the normal lives of surrounding residents. Investigations have shown that people living along elevated lines complain that the noise is ...Noise generated by trains running on elevated lines creates many disturbances to the normal lives of surrounding residents. Investigations have shown that people living along elevated lines complain that the noise is sometimes unbearable. To better control the noise and optimize the acoustic environment, noise spectrum characteristics were analyzed and compared with a field test and a numerical simulation. Through an energy analysis of the noise on the bridge side, the energy distribution characteristics of the noise at specific measuring points in different frequency bands were obtained. The influence of the Doppler effect on frequency shift was analyzed. Based on the partial coherence theory, a multi-input and single-output program was compiled to calculate the correlation and contribution degree of the bridge structure-borne noise and wheel/rail noise at the one-third octave center frequency. The results show that the peak noises of the bridge and the wheel/rail are concentrated at 31.5–63 Hz and 400–800 Hz, respectively. For environmental noise on the bridge side, the frequency band above 250 Hz is mainly affected by the wheel/rail noise. In areas of noise source strength, the relative ratio of noise energy above 250 Hz can reach 83.4%. Noise in the near ground and far bridge area is mainly low-frequency, and the relative energy ratio is about 8.9%. The Doppler effect has an influence of less than 6% on the frequency shift with a speed of 67.9 km/h. In the low-frequency band below 250 Hz, the noise in the acoustic shadow area near the bridge and the ground is mainly contributed to by the vibration-radiated noise of the bridge, of which the contribution of the bottom panel is the most prominent. The noise in the comprehensive noise area of the far bridge is mainly caused by the structure-borne noise of the bridge, and the contribution of each bridge panel is different. This study can provide a reference for finding the source of elevated rail noise in some challenging frequency ranges and for then determining optimal designs and measures for noise reduction.展开更多
The influence of an acoustic logging tool on borehole guided wave propagation should be considered in the processing and inversion of the guided waves for formation acoustic property estimation. This study introduces ...The influence of an acoustic logging tool on borehole guided wave propagation should be considered in the processing and inversion of the guided waves for formation acoustic property estimation. This study introduces an equivalent-tool theory that models the tool response using an elastic rod with an effective modulus and applies the theory to multipole acoustic logging for both wireline and logging while drilling （LWD） conditions. The theory can be derived by matching the tool’s acoustic impedance/conductance to that of the multipole acoustic wavefield around the tool, assuming that tool radius is small compared to wavelength. We have validated the effectiveness and accuracy of the theory using numerical modeling and its practicality using field data. In field data applications, one can calibrate the tool parameters by fitting the theoretical dispersion curve to field data without having to consider the actual tool’s structure and composition. We use a dispersion correction example to demonstrate an application of the simple theory to field data processing and the validity of the processing result.展开更多
We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals （PFM） in the low frequency range. PFM is simplified as an equivalent idealized sheet with...We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals （PFM） in the low frequency range. PFM is simplified as an equivalent idealized sheet with all metallic fibers aligned in one direction and distributed in periodic hexagonal patterns. We use a phenomenological model in the literature to investigate the effects of pore geometrical parameters （fiber diameter and gap） on sound absorption performance. The sound absorption coefficient of multi- layered PFMs is calculated using impedance translation theorem, To demonstrate the validity of the present model, we compare the predicted results with the experimental data. With the average sound absorption （low frequency range） as the objective function and the fiber gaps as the design variables, an optimization method for multi-layered fibrous metals is proposed. A new fibrous layout with given porosity of multi-layered fibrous metals is suggested to achieve optimal low frequency sound absorption. The sound absorption coefficient of the optimal multi-layered fibrous metal is higher than the single- layered fibrous metal, and a significant effect of the fibrous material on sound absorption is found due to the surface Dorosity of the multi-layered fibrous.展开更多
In speech recognition, acoustic modeling always requires tremendous transcribed samples, and the transcription becomes intensively time-consuming and costly. In order to aid this labor-intensive process, Active Learni...In speech recognition, acoustic modeling always requires tremendous transcribed samples, and the transcription becomes intensively time-consuming and costly. In order to aid this labor-intensive process, Active Learning （AL） is adopted for speech recognition, where only the most informative training samples are selected for manual annotation. In this paper, we propose a novel active learning method for Chinese acoustic modeling, the methods for initial training set selection based on Kullback-Leibler Divergence （KLD） and sample evaluation based on multi-level confusion networks are proposed and adopted in our active learning system, respectively. Our experiments show that our proposed method can achieve satisfying performances.展开更多
Based on the acoustic mapping, a prediction model for the ground noise radiated from an in-flight helicopter is established. For the enhancement of calculation efficiency, a high-efficiency second-level acoustic radia...Based on the acoustic mapping, a prediction model for the ground noise radiated from an in-flight helicopter is established. For the enhancement of calculation efficiency, a high-efficiency second-level acoustic radiation model capable of taking the influence of atmosphere absorption on noise into account is first developed by the combination of the point-source idea and the rotor noise radiation characteristics. The comparison between the present model and the direct computation method of noise is done and the high efficiency of the model is validated. Rotor free-wake analysis method and Ffowcs Williams-Hawkings（FW-H） equation are applied to the aerodynamics and noise prediction in the present model. Secondly, a database of noise spheres with the characteristic parameters of advance ratio and tip-path-plane angle is established by the helicopter trim model together with a parametric modeling approach. Furthermore, based on acoustic mapping, a method of rapid simulation for the ground noise radiated from an in-flight helicopter is developed. The noise footprint for AH-1 rotor is then calculated and the influence of some parameters including advance ratio and flight path angle on ground noise is deeply analyzed using the developed model.The results suggest that with the increase of advance ratio and flight path angle, the peak noise levels on the ground first increase and then decrease, in the meantime, the maximum Sound Exposure Level（SEL） noise on the ground shifts toward the advancing side of rotor. Besides, through the analysis of the effects of longitudinal forces on miss-distance and rotor Blade-Vortex Interaction（BVI） noise in descent flight, some meaningful results for reducing the BVI noise on the ground are obtained.展开更多
AIM:To use leptin-deficient(ob/ob) mice with demonstrated differences in steatosis levels to test a new diagnostic method using the acoustical structure quantification(ASQ) mode and the associated analytical parameter...AIM:To use leptin-deficient(ob/ob) mice with demonstrated differences in steatosis levels to test a new diagnostic method using the acoustical structure quantification(ASQ) mode and the associated analytical parameter,"focal disturbance ratio"(FD-ratio).METHODS:Nine ob/ob mice,at 5,8,and 12 wk of age(n = 3 in each age group),were used as models for hepatic steatosis.Echo signals obtained from ultrasonography in the mice were analyzed by ASQ,which uses a statistical analysis of echo amplitude to estimate inhomogeneity in the diagnostic region.FD-ratio,as calculated from this analysis,was the focus of the present study.FD-ratio and fat droplet areas and sizes were compared between age groups.RESULTS:No fibrosis or inflammation was observed in any of the groups.The fat droplet area significantly(P < 0.01) increased with age from 1.25% ± 0.28% at 5 wk to 31.07% ± 0.48% at 8 wk to 51.69% ± 3.19% at 12 wk.The median fat droplet size also significantly(P < 0.01) increased with age,from 1.33(0.55-10.52) m at 5 wk,2.82(0.61-44.13) m at 8 wk and 6.34(0.66-81.83) m at 12 wk.The mean FD-ratio was 0.42 ± 0.11 at 5 wk,0.11 ± 0.05 at 8 wk,and 0.03 ± 0.02 at 12 wk.The FD-ratio was significantly lower at 12 wk than at 5 wk and 8 wk(P < 0.01).A significant negative correlation was observed between the FD-ratio and either the fat droplet area(r =-0.7211,P = 0.0017) or fat droplet size(r =-0.9811,P = 0.0052).CONCLUSION:This tool for statistical analysis of signals from ultrasonography using the FD-ratio can be used to accurately quantify fat in vivo in an animal model of hepatic steatosis,and may serve as a quantitative biomarker of hepatic steatosis.展开更多
The morphological changes in isolated bubbles in gassy silt play a critical role in the microscopic structures between soil particles and bubbles and macroscopic physical properties.Based on X-ray CT scanning experime...The morphological changes in isolated bubbles in gassy silt play a critical role in the microscopic structures between soil particles and bubbles and macroscopic physical properties.Based on X-ray CT scanning experiments under various vertical loads(four levels),self-designed acoustic macro experiments,and a series of formula revisions to the macro-air-bearing silt sound-velocity prediction model,this paper discusses the macro-and micro-scale features of gassy silts from the Yellow River Delta.The samples consisted of different proportions of silt from the Yellow River Delta and porous media,and they were used to form two types of aerosol silts with initial gas contents of 4.23%and 7.67%.The results show that the air bubble content and external load considerably affect the microstructural parameters and acoustic behavior of gassy silt in the Yellow River Delta.The macroscopic sound velocity showed a linear positive correlation with vertical load and relation to microstructural parameters in varying manners and degrees.Based on the traditional Biot-Stoll acoustic model,the gas-phase medium coefficient was introduced for the proper calculation and prediction of the sound velocity of air-bearing silt.The errors of the overall prediction varied between 5.6%and 9.6%.展开更多
In China,Tibetan is usually divided into three major dialects:the Am-do,Khams and Lhasa dialects.The Am-do dialect evolved from ancient Tibetan and is a local variant of modern Tibetan.Although this dialect has its ow...In China,Tibetan is usually divided into three major dialects:the Am-do,Khams and Lhasa dialects.The Am-do dialect evolved from ancient Tibetan and is a local variant of modern Tibetan.Although this dialect has its own specific historical and social conditions and development,there have been different degrees of communication with other ethnic groups,but all the abovementioned dialects developed from the same language:Tibetan.This paper uses the particularity of Tibetan suffixes in pronunciation and proposes a lexicon for the Am-do language,which optimizes the problems existing in previous research.Audio data of the Am-do dialect are expanded by data augmentation technology combining noise and reverberation,and the morphological characteristics and characteristics of the Tibetan language are further considered.According to the particularity of Tibetan grammar,grammatical features are used to optimize grammatical relationships and are combined with a language model,and the Am-do dialect is scored and rescored.Experimental results show that compared with the baseline,our proposed new lexicon and data augmentation technology yields a relative increase of approximately 3%in character error rates(CERs)and a relative increase of 3%-19%in the recognition rate of acoustic models and language models.展开更多
Fabricating of metal foams with desired morphological parameters including pore size,porosity and pore opening is possible now using sintering technology.Thus,if it is possible to determine the morphology of metal foa...Fabricating of metal foams with desired morphological parameters including pore size,porosity and pore opening is possible now using sintering technology.Thus,if it is possible to determine the morphology of metal foam to absorb sound at a given frequency,and then fabricate it through sintering,it is expected to have optimized metal foams for the best sound absorption.Theoretical sound absorption models such as Lu model describe the relationship between morphological parameters and the sound absorption coefficient.In this study,the Lu model was used to optimize the morphological parameters of aluminum metal foam for the best sound absorption coefficient.For this purpose,the Lu model was numerically solved using written codes in MATLAB software.After validating the proposed codes with benchmark data,the genetic algorithm(GA)was applied to optimize the affecting morphological parameters on the sound absorption coefficient.The optimization was carried out for the thicknesses of 5 mm to 40 mm at the sound frequency range of 250 Hz–8000 Hz.The optimized parameters ranged from 50%to 95%for porosity,0.1 mm to 4.5 mm for pore size,and 0.07 mm to 0.6 mm for pore opening size.The result of this study was applied to fabricate the desired aluminum metal foams for the best sound absorption.The novel approach applied in this study,is expected to be successfully applied in for best sound absorption in desired frequencies.展开更多
In this paper,we present a comparison of Khasi speech representations with four different spectral features and novel extension towards the development of Khasi speech corpora.These four features include linear predic...In this paper,we present a comparison of Khasi speech representations with four different spectral features and novel extension towards the development of Khasi speech corpora.These four features include linear predictive coding(LPC),linear prediction cepstrum coefficient(LPCC),perceptual linear prediction(PLP),and Mel frequency cepstral coefficient(MFCC).The 10-hour speech data were used for training and 3-hour data for testing.For each spectral feature,different hidden Markov model(HMM)based recognizers with variations in HMM states and different Gaussian mixture models(GMMs)were built.The performance was evaluated by using the word error rate(WER).The experimental results show that MFCC provides a better representation for Khasi speech compared with the other three spectral features.展开更多
A novel automatic ultrasonic system used for the inspection of pipeline girth welds is developed, in which a linear phased array transducer using electronic scan is adopted. Optimal array parameters are determined bas...A novel automatic ultrasonic system used for the inspection of pipeline girth welds is developed, in which a linear phased array transducer using electronic scan is adopted. Optimal array parameters are determined based on a mathematical model of acoustic field for linear phased army derived from Huygens＇ principle. The testing method and the system structure are introduced. The experimental results show that the phased array transducer system has the same detectability as that of conventional ultrasonic transducer system, but the system architecture can be simplified greatly, and the testing flexibility and the testing speed can be improved greatly.展开更多
基金supported by the National Natural Science Foundation of China(Nos.51576097,51976089)the Funding for Outstanding Doctoral Dissertation in Nanjing University of Aeronautics and Astronautics,China(No.BCXJ24-05)the Aeronautical Science Foundation of China(No.2023L060052001).
文摘Feasible and accurate acoustic modeling of external and internal aircraft environments is essential for designing low-noise multi-propeller aircraft.This work proposes a novel sound source equivalent approach using Lighthill's sound sources(monopole and dipole point sources)for simulating propeller noise.It establishes data transmission interfaces between aerodynamic acoustics and acoustic-solid coupling.Equations are expanded from acoustic pressure to monopole amplitude and dipole moment vector.The basic assumption is that the propeller noise has similar spatial radiation directivity as the sound point source.The radiation relationships are explicitly built between harmonic propeller noise and dipole sources at cabin cross-sections,and between harmonic propeller noise and monopole sources along cabin longitudinal sections.External acoustic pressure distributions of cabin noise are calculated using Unsteady Reynolds-Averaged Navier-Stokes(URANS)and Ffowcs Williams-Hawkings(FW-H)approach.Interior noise is calculated using frequency domain acoustic-solid coupling.Sound source equivalent approach is used to calculate the equivalent intensity of monopole or dipole point sources for external excitation.To assess accuracy of the proposed approach,both external and interior noise of a turboprop aircraft with four sixbladed propellers are calculated and compared against flight trial results of a C-130J-30 Hercules.The turboprop aircraft adopts the same size parameters as the C-130J-30 Hercules.The present frequency domain acoustic approach is accurate for interior cabin noise.It is beneficial for enhancing the design of the low-noise turboprop aircraft.
基金supported by the National Natural Science Foundation of China(Nos.51875179 and 52275419).
文摘Ultrasonic vibration-assisted technology is widely utilized in the performance research and manufacturing process of metallic materials owing to its advantages of introducing highfrequency acoustic systems. However, the acoustic plasticity constitutive model and potential mechanism, involving Ti3Al intermetallic compounds, have not yet been clarified. Therefore, the Ultrasonic-K-M hybrid acoustic constitutive model of Ti3Al was established by considering the stress superposition, acoustic thermal softening, acoustic softening and acoustic residual hardening effects according to the dislocation density evolution theory and crystal plasticity theory. Meanwhile, the mechanical behavior of ultrasonic vibration-assisted tension(UVAT) and microstructure of ultrasonic vibration-assisted milling(UVAM) for Ti3Al was investigated. Dislocation density to be overcome from initial deformation to failure of Ti3Al was calculated in UVAT and was verified in UVAM. The results indicated that the Ultrasonic-K-M model showed a good agreement with the experimental data. There was an obviously softening phenomenon after introducing the ultrasonic energy field in the Ti3Al whole deformation region, and the degree of softening was positively correlated with amplitude. Furthermore, the maximum reduction ratio in yield strength of Ti3Al was16 % and the maximum reduction value in ultimate tensile strength was 206.91 MPa. The elongation rose first and then fell as amplitude enlarged, but only as the vibration was applied in the whole deformation region, the elongation was always greater than 14.58 %. In addition, The UVAM process significantly reduced the dislocation density increment to be overcome for Ti3Al material removal by 1.37 times, and promoted dislocation motion and cancellation to make twisted dislocations evolve into parallel dislocations. As the amplitude increased to 4 μm, the depth of the disturbed area of the plastic deformation layer increased by a maximum of 2.5 times.
基金Project 60475007 supported by the National Natural Science Foundation of China
文摘The design of acoustic models is of vital importance to build a reliable connection between acoustic wave-form and linguistic messages in terms of individual speech units. According to the characteristic of Chinese phonemes, the base acoustic phoneme units set is decided and refined and a decision tree based state tying approach is explored. Since one of the advantages of top-down tying method is flexibility in maintaining a balance between model accuracy and complexity, relevant adjustments are conducted, such as the stopping criterion of decision tree node splitting, during which optimal thresholds are captured. Better results are achieved in improving acoustic modeling accuracy as well as minimizing the scale of the model to a trainable extent.
基金Project supported,in part,by the National Natural Science Foundation of China(Grant No.41104065)the"Chen Guang"Program of Shanghai Municipal Ed-ucation Commission and Shanghai Education Development Foundation,China(Grant No.12CG047)+1 种基金the Scientific Research Innovation Program of Shanghai Municipal Education Commission,China(Grant No.13YZ022)the State Key Laboratory of Precision Measuring Technology and Instruments,China
文摘The method of numerical analysis is employed to study the resonance mechanism of the lumped parameter system model for acoustic mine detection. Based on the basic principle of the acoustic resonance technique for mine detection and the characteristics of low-frequency acoustics, the “soil-mine” system could be equivalent to a damping “mass-spring” resonance model with a lumped parameter analysis method. The dynamic simulation software, Adams, is adopted to analyze the lumped parameter system model numerically. The simulated resonance frequency and anti-resonance frequency are 151 Hz and 512 Hz respectively, basically in agreement with the published resonance frequency of 155 Hz and anti-resonance frequency of 513 Hz, which were measured in the experiment. Therefore, the technique of numerical simulation is validated to have the potential for analyzing the acoustic mine detection model quantitatively. The influences of the soil and mine parameters on the resonance characteristics of the soil–mine system could be investigated by changing the parameter setup in a flexible manner.
基金Supported by the National Key Scientific Instrument and Equipment Development Projects of China under Grant No 81127901the National Natural Science Foundation of China under Grant Nos 61372017 and 30970828
文摘A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The two- dimensional intensity distribution and the time evolution of speckles in different probe locations are obtained. The fluctuation of speckle intensity tracks the acoustic-radiation-force shear wave propagation, and especially the reduction of speckle intensity implies attenuation of shear wave. Then, the shear wave velocity is estimated quantitatively on the basis of the time-to-peak algorithm and linear regression processing. The results reveal that a smaller sampling interval yields higher estimation precision and the shear wave velocity is estimated more efficiently by using speckle intensity difference than by using speckle contrast difference according to the estimation error. Hence, the shear wave velocity is estimated to be 2.25 m/s with relatively high accuracy for the estimation error reaches the minimum （0.071）.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11334005,11574150 and 11564006
文摘A theoretical model which couples the oscillation of cavitation bubbles with the equation of an acoustic wave is utilized to describe the sound fields in double-layer liquids, which can be used to realize the asymmetric transmission of acoustic waves. Numerical simulations show that the asymmetry is related to the properties of the host liquids and the input acoustic wave. Asymmetry can be enhanced if the maximum number density or the ambient radius of the cavitation bubbles in the low cavitation threshold liquid increases. Moreover, the direction of rectification will be reversed if the amplitude of the input acoustic wave becomes high enough.
基金Project supported by the Fund for Key Laboratory of National Defense Science and Technology of Underwater Acoustic Countermeasure Technology(Grant No.6412214200403)the National Defense Fundamental Scientific Research Program(Grant No.JCKY2020550C011)the Special Independent Scientific Research Program of National University of Defense Technology(Grant No.ZZKY-ZX-04-01)。
文摘Underwater acoustic models are effective tools for simulating underwater sound propagation.More than 50 years of research have been conducted on the theory and computational models of sound propagation in the ocean.Unfortunately,underwater sound propagation models were unable to solve practical large-scale three-dimensional problems for many years due to limited computing power and hardware conditions.Since the mid-1980s,research on high performance computing for acoustic propagation models in the field of underwater acoustics has flourished with the emergence of high-performance computing platforms,enabling underwater acoustic propagation models to solve many practical application problems that could not be solved before.In this paper,the contributions of research on high-performance computing for underwater acoustic propagation models since the 1980s are thoroughly reviewed and the possible development directions for the future are outlined.
基金supported by the China National Magnetic Confinement Fusion Energy Research Project under Grant No.2015GB120005National Natural Science Foundation of China No.11275260
文摘A reduced two-fluid model is constructed to investigate the geodesic acoustic mode（GAM）. The ion dynamics is sufficiently considered by including an anisotropic pressure tensor and inhibited heat flux vector, whose evolutions are determined by equations derived from the 16-momentum model. Electrons are supposed to obey the Boltzmann distribution responding to the electrostatic oscillation with near ion acoustic velocity. In the large safety factor limit, the GAM frequency is identical with the kinetic one to the order of 1 q2 when zeroing the anisotropy. For general anisotropy, the reduced two-fluid model generates the frequency agreeing well with the kinetic result with arbitrary electron temperature. The present simplified fluid model will be of great use and interest for young researchers and students devoted to plasma physics.
文摘This paper presents the recognition of “Baoule” spoken sentences, a language of C?te d’Ivoire. Several formalisms allow the modelling of an automatic speech recognition system. The one we used to realize our system is based on Hidden Markov Models (HMM) discreet. Our goal in this article is to present a system for the recognition of the Baoule word. We present three classical problems and develop different algorithms able to resolve them. We then execute these algorithms with concrete examples.
基金Project supported by the National Natural Science Foundation of China (Nos. 5140843411772230and 51678446)。
文摘Noise generated by trains running on elevated lines creates many disturbances to the normal lives of surrounding residents. Investigations have shown that people living along elevated lines complain that the noise is sometimes unbearable. To better control the noise and optimize the acoustic environment, noise spectrum characteristics were analyzed and compared with a field test and a numerical simulation. Through an energy analysis of the noise on the bridge side, the energy distribution characteristics of the noise at specific measuring points in different frequency bands were obtained. The influence of the Doppler effect on frequency shift was analyzed. Based on the partial coherence theory, a multi-input and single-output program was compiled to calculate the correlation and contribution degree of the bridge structure-borne noise and wheel/rail noise at the one-third octave center frequency. The results show that the peak noises of the bridge and the wheel/rail are concentrated at 31.5–63 Hz and 400–800 Hz, respectively. For environmental noise on the bridge side, the frequency band above 250 Hz is mainly affected by the wheel/rail noise. In areas of noise source strength, the relative ratio of noise energy above 250 Hz can reach 83.4%. Noise in the near ground and far bridge area is mainly low-frequency, and the relative energy ratio is about 8.9%. The Doppler effect has an influence of less than 6% on the frequency shift with a speed of 67.9 km/h. In the low-frequency band below 250 Hz, the noise in the acoustic shadow area near the bridge and the ground is mainly contributed to by the vibration-radiated noise of the bridge, of which the contribution of the bottom panel is the most prominent. The noise in the comprehensive noise area of the far bridge is mainly caused by the structure-borne noise of the bridge, and the contribution of each bridge panel is different. This study can provide a reference for finding the source of elevated rail noise in some challenging frequency ranges and for then determining optimal designs and measures for noise reduction.
基金supported by the Fundamental Research Funds for the Central Universities and the National Hi-tech Research and Development Program of China (863 Program) (Grant No. 2007AA06Z232 )
文摘The influence of an acoustic logging tool on borehole guided wave propagation should be considered in the processing and inversion of the guided waves for formation acoustic property estimation. This study introduces an equivalent-tool theory that models the tool response using an elastic rod with an effective modulus and applies the theory to multipole acoustic logging for both wireline and logging while drilling （LWD） conditions. The theory can be derived by matching the tool’s acoustic impedance/conductance to that of the multipole acoustic wavefield around the tool, assuming that tool radius is small compared to wavelength. We have validated the effectiveness and accuracy of the theory using numerical modeling and its practicality using field data. In field data applications, one can calibrate the tool parameters by fitting the theoretical dispersion curve to field data without having to consider the actual tool’s structure and composition. We use a dispersion correction example to demonstrate an application of the simple theory to field data processing and the validity of the processing result.
基金the support of the National Basic Research Program(973 Program)of China(Grant No.2011CB610304)the National Natural Science Foundation of China(Grant Nos.11332004 and 11402046)+2 种基金China Postdoctoral Science Foundation(No.2015M571296)the 111 Project(B14013)the CATIC Industrial Production Projects(Grant No.CXY2013DLLG32)
文摘We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals （PFM） in the low frequency range. PFM is simplified as an equivalent idealized sheet with all metallic fibers aligned in one direction and distributed in periodic hexagonal patterns. We use a phenomenological model in the literature to investigate the effects of pore geometrical parameters （fiber diameter and gap） on sound absorption performance. The sound absorption coefficient of multi- layered PFMs is calculated using impedance translation theorem, To demonstrate the validity of the present model, we compare the predicted results with the experimental data. With the average sound absorption （low frequency range） as the objective function and the fiber gaps as the design variables, an optimization method for multi-layered fibrous metals is proposed. A new fibrous layout with given porosity of multi-layered fibrous metals is suggested to achieve optimal low frequency sound absorption. The sound absorption coefficient of the optimal multi-layered fibrous metal is higher than the single- layered fibrous metal, and a significant effect of the fibrous material on sound absorption is found due to the surface Dorosity of the multi-layered fibrous.
基金Acknowledgements This study is supported by the National Natural Science Foundation of China （60705019）, the National High-Tech Research and Development Plan of China （ 2006AA010102 and 2007AA01Z417）, the NOKIA project, and the 111 Project of China under Grant No. 1308004.
文摘In speech recognition, acoustic modeling always requires tremendous transcribed samples, and the transcription becomes intensively time-consuming and costly. In order to aid this labor-intensive process, Active Learning （AL） is adopted for speech recognition, where only the most informative training samples are selected for manual annotation. In this paper, we propose a novel active learning method for Chinese acoustic modeling, the methods for initial training set selection based on Kullback-Leibler Divergence （KLD） and sample evaluation based on multi-level confusion networks are proposed and adopted in our active learning system, respectively. Our experiments show that our proposed method can achieve satisfying performances.
基金supported by the Funding of Jiangsu Innovation Program for Graduate Education (No. KYLX16_0390)
文摘Based on the acoustic mapping, a prediction model for the ground noise radiated from an in-flight helicopter is established. For the enhancement of calculation efficiency, a high-efficiency second-level acoustic radiation model capable of taking the influence of atmosphere absorption on noise into account is first developed by the combination of the point-source idea and the rotor noise radiation characteristics. The comparison between the present model and the direct computation method of noise is done and the high efficiency of the model is validated. Rotor free-wake analysis method and Ffowcs Williams-Hawkings（FW-H） equation are applied to the aerodynamics and noise prediction in the present model. Secondly, a database of noise spheres with the characteristic parameters of advance ratio and tip-path-plane angle is established by the helicopter trim model together with a parametric modeling approach. Furthermore, based on acoustic mapping, a method of rapid simulation for the ground noise radiated from an in-flight helicopter is developed. The noise footprint for AH-1 rotor is then calculated and the influence of some parameters including advance ratio and flight path angle on ground noise is deeply analyzed using the developed model.The results suggest that with the increase of advance ratio and flight path angle, the peak noise levels on the ground first increase and then decrease, in the meantime, the maximum Sound Exposure Level（SEL） noise on the ground shifts toward the advancing side of rotor. Besides, through the analysis of the effects of longitudinal forces on miss-distance and rotor Blade-Vortex Interaction（BVI） noise in descent flight, some meaningful results for reducing the BVI noise on the ground are obtained.
文摘AIM:To use leptin-deficient(ob/ob) mice with demonstrated differences in steatosis levels to test a new diagnostic method using the acoustical structure quantification(ASQ) mode and the associated analytical parameter,"focal disturbance ratio"(FD-ratio).METHODS:Nine ob/ob mice,at 5,8,and 12 wk of age(n = 3 in each age group),were used as models for hepatic steatosis.Echo signals obtained from ultrasonography in the mice were analyzed by ASQ,which uses a statistical analysis of echo amplitude to estimate inhomogeneity in the diagnostic region.FD-ratio,as calculated from this analysis,was the focus of the present study.FD-ratio and fat droplet areas and sizes were compared between age groups.RESULTS:No fibrosis or inflammation was observed in any of the groups.The fat droplet area significantly(P < 0.01) increased with age from 1.25% ± 0.28% at 5 wk to 31.07% ± 0.48% at 8 wk to 51.69% ± 3.19% at 12 wk.The median fat droplet size also significantly(P < 0.01) increased with age,from 1.33(0.55-10.52) m at 5 wk,2.82(0.61-44.13) m at 8 wk and 6.34(0.66-81.83) m at 12 wk.The mean FD-ratio was 0.42 ± 0.11 at 5 wk,0.11 ± 0.05 at 8 wk,and 0.03 ± 0.02 at 12 wk.The FD-ratio was significantly lower at 12 wk than at 5 wk and 8 wk(P < 0.01).A significant negative correlation was observed between the FD-ratio and either the fat droplet area(r =-0.7211,P = 0.0017) or fat droplet size(r =-0.9811,P = 0.0052).CONCLUSION:This tool for statistical analysis of signals from ultrasonography using the FD-ratio can be used to accurately quantify fat in vivo in an animal model of hepatic steatosis,and may serve as a quantitative biomarker of hepatic steatosis.
基金supported by the National Natural Science Foundation of China(No.U2006213)the China Post doctoral Science Foundation(No.2022M712989).
文摘The morphological changes in isolated bubbles in gassy silt play a critical role in the microscopic structures between soil particles and bubbles and macroscopic physical properties.Based on X-ray CT scanning experiments under various vertical loads(four levels),self-designed acoustic macro experiments,and a series of formula revisions to the macro-air-bearing silt sound-velocity prediction model,this paper discusses the macro-and micro-scale features of gassy silts from the Yellow River Delta.The samples consisted of different proportions of silt from the Yellow River Delta and porous media,and they were used to form two types of aerosol silts with initial gas contents of 4.23%and 7.67%.The results show that the air bubble content and external load considerably affect the microstructural parameters and acoustic behavior of gassy silt in the Yellow River Delta.The macroscopic sound velocity showed a linear positive correlation with vertical load and relation to microstructural parameters in varying manners and degrees.Based on the traditional Biot-Stoll acoustic model,the gas-phase medium coefficient was introduced for the proper calculation and prediction of the sound velocity of air-bearing silt.The errors of the overall prediction varied between 5.6%and 9.6%.
基金supported by the Regional Innovation Cooperation Project of Sichuan Province(Grant No.22QYCX0082).
文摘In China,Tibetan is usually divided into three major dialects:the Am-do,Khams and Lhasa dialects.The Am-do dialect evolved from ancient Tibetan and is a local variant of modern Tibetan.Although this dialect has its own specific historical and social conditions and development,there have been different degrees of communication with other ethnic groups,but all the abovementioned dialects developed from the same language:Tibetan.This paper uses the particularity of Tibetan suffixes in pronunciation and proposes a lexicon for the Am-do language,which optimizes the problems existing in previous research.Audio data of the Am-do dialect are expanded by data augmentation technology combining noise and reverberation,and the morphological characteristics and characteristics of the Tibetan language are further considered.According to the particularity of Tibetan grammar,grammatical features are used to optimize grammatical relationships and are combined with a language model,and the Am-do dialect is scored and rescored.Experimental results show that compared with the baseline,our proposed new lexicon and data augmentation technology yields a relative increase of approximately 3%in character error rates(CERs)and a relative increase of 3%-19%in the recognition rate of acoustic models and language models.
基金paper was the output of a research project(Registration No.9597/22)which was financially supported by Shahid Beheshti University of Medical Sciences.
文摘Fabricating of metal foams with desired morphological parameters including pore size,porosity and pore opening is possible now using sintering technology.Thus,if it is possible to determine the morphology of metal foam to absorb sound at a given frequency,and then fabricate it through sintering,it is expected to have optimized metal foams for the best sound absorption.Theoretical sound absorption models such as Lu model describe the relationship between morphological parameters and the sound absorption coefficient.In this study,the Lu model was used to optimize the morphological parameters of aluminum metal foam for the best sound absorption coefficient.For this purpose,the Lu model was numerically solved using written codes in MATLAB software.After validating the proposed codes with benchmark data,the genetic algorithm(GA)was applied to optimize the affecting morphological parameters on the sound absorption coefficient.The optimization was carried out for the thicknesses of 5 mm to 40 mm at the sound frequency range of 250 Hz–8000 Hz.The optimized parameters ranged from 50%to 95%for porosity,0.1 mm to 4.5 mm for pore size,and 0.07 mm to 0.6 mm for pore opening size.The result of this study was applied to fabricate the desired aluminum metal foams for the best sound absorption.The novel approach applied in this study,is expected to be successfully applied in for best sound absorption in desired frequencies.
基金supported by the Visvesvaraya Ph.D.Scheme for Electronics and IT students launched by the Ministry of Electronics and Information Technology(MeiTY),Government of India under Grant No.PhD-MLA/4(95)/2015-2016.
文摘In this paper,we present a comparison of Khasi speech representations with four different spectral features and novel extension towards the development of Khasi speech corpora.These four features include linear predictive coding(LPC),linear prediction cepstrum coefficient(LPCC),perceptual linear prediction(PLP),and Mel frequency cepstral coefficient(MFCC).The 10-hour speech data were used for training and 3-hour data for testing.For each spectral feature,different hidden Markov model(HMM)based recognizers with variations in HMM states and different Gaussian mixture models(GMMs)were built.The performance was evaluated by using the word error rate(WER).The experimental results show that MFCC provides a better representation for Khasi speech compared with the other three spectral features.
文摘A novel automatic ultrasonic system used for the inspection of pipeline girth welds is developed, in which a linear phased array transducer using electronic scan is adopted. Optimal array parameters are determined based on a mathematical model of acoustic field for linear phased army derived from Huygens＇ principle. The testing method and the system structure are introduced. The experimental results show that the phased array transducer system has the same detectability as that of conventional ultrasonic transducer system, but the system architecture can be simplified greatly, and the testing flexibility and the testing speed can be improved greatly.
