The rational design of polymer acceptors with strong and broad absorption is critical to improve photovoltaic performance.In this work,a new polymer acceptor PY9-T based on heptacyclic benzotriazole(Y9-C16)as a buildi...The rational design of polymer acceptors with strong and broad absorption is critical to improve photovoltaic performance.In this work,a new polymer acceptor PY9-T based on heptacyclic benzotriazole(Y9-C16)as a building block and thiophene unit as the linking unit was synthesized,which exhibited a low bandgap(1.37 eV)and a high extinction coefficient of the neat film(1.44×10^(5) cm^(−1)).When PY9-T was blended with the wide bandgap polymer donor PBDB-T,the all-polymer solar cells(APSCs)showed a high power conversion efficiency(PCE)of 10.45%with both high open circuit voltage of 0.881 V and short-circuit current density of 19.82 mA/cm^(2).In addition,APSCs based on PY9-T show good thermal stability,as evidenced by slight changes morphologies when annealed at 100℃.These results suggest that Y9-C16 provides a new building block to develop efficient and stable polymer acceptors.展开更多
B-N coordination bond can be used to develop polymer electron acceptors for efficient all-polymer solar cells （all-PSCs）. Here, we report a new alternating conjugated polymer containing two building blocks based on ...B-N coordination bond can be used to develop polymer electron acceptors for efficient all-polymer solar cells （all-PSCs）. Here, we report a new alternating conjugated polymer containing two building blocks based on B-N unit. The polymer exhibits strong light absorption in the visible range, low-lying LUMO/HOMO energy levels and moderate electron mobility. The resulting all-PSC devices exhibit power conversion efficiencies of 1.50%-2.47%.展开更多
The recently reported efficient polymerized small-molecule acceptors(PSMAs)usually adopt a regioregular backbone by polymerizing small-molecule acceptors precursors with a low-reactivity 5-brominated 3-(dicyanomethyli...The recently reported efficient polymerized small-molecule acceptors(PSMAs)usually adopt a regioregular backbone by polymerizing small-molecule acceptors precursors with a low-reactivity 5-brominated 3-(dicyanomethylidene)indan-1-one(IC)end group or its derivatives,leading to low molecular weight,and thus reduce active layer mechanical properties.Herein,a series of newly designed chlorinated PSMAs originating from isomeric IC end groups are developed by adjusting chlorinated positions and copolymerized sites on end groups to achieve high molecular weight,favorable intermolecular interaction,and improved physicochemical properties.Compared with regioregular PY2Se-Cl-o and PY2Se-Cl-m,regiorandom PY2Se-Cl-ran has a similar absorption profile,moderate lowest unoccupied molecular orbital level,and favorable intermolecular packing and crystallization properties.Moreover,the binary PM6:PY2Se-Cl-ran blend achieves better ductility with a crack-onset strain of 17.5% and improved power conversion efficiency(PCE)of 16.23% in all-polymer solar cells(all-PSCs)due to the higher molecular weight of PY2Se-Cl-ran and optimized blend morphology,while the ternary PM6:J71:PY2Se-Cl-ran blend offers an impressive PCE approaching 17% and excellent device stability,which are all crucial for potential practical applications of all-PSCs in wearable electronics.To date,the efficiency of 16.86% is the highest value reported for the regiorandom PSMAs-based all-PSCs and is also one of the best values reported for the all-PSCs.Our work provides a new perspective to develop efficient all-PSCs,with all high active layer ductility,impressive PCE,and excellent device stability,towards practical applications.展开更多
Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor pol...Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis（5-（2-ethylhexyl）thiophen-2-yl）benzo[ 1,2-b;4,5-b＇]dithiophene-2,6-diyl-alt-（4-（2-ethylhexyl）-3-fluorothieno[3,4- b]thiophene）-2-carboxylate-2,6-diyl] （PTB7-Th） and poly[（5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl）-alt-（3,3＇-di（2- dodecyltetradecyl）-2,2＇;5＇,2＂;5＂,2＇-quaterthiophen-5,5＇＂-diyl）] （PffBT4T-2DT）, with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th：poly[NN-bis（1-hexylheptyl）-3,4,9,10-pery,enediimide-1,6/1,7-diyl-alt-2,5-thiophene] （PDI-Th） exhibited the best power conversion efficiency （PCE） of 5.13%, with open-circuit voltage （Vo：） = 0.79 lV, short-circuit current density （Jsc） = 12.35 mA.cm-2 and fill-factor （FF） = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor post- treatment is required for obtaining such a cell performance.展开更多
All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)in...All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)into backbones of polymer donor(P_(D))or polymer acceptor(P_(A))has been demonstrated as an efficient approach to enhance both the photovoltaic(PV)and mechanical properties of the all-PSCs.However,length dependency of FCBS on certain all-PSC related properties has not been systematically explored.In this regard,we report a series of new non-conjugated P_(A)s by incorporating FCBS with various lengths(2,4,and 8 carbon atoms in thioalkyl segments).Unlike com-mon studies on so-called side-chain engineering,where longer side chains would lead to better solubility of those resulting polymers,in this work,we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length(i.e.,C2)in P_(A) named PYTS-C2.Its all-PSC achieves a high efficiency of 11.37%,and excellent mechanical robustness with a crack onset strain of 12.39%,significantly superior to those of the other P_(A)s.These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs,providing an effective strategy to fine-tune the structures of P_(A)s for highly efficient and mechanically robust PSCs.展开更多
Polymer acceptors based on extended fused ring p skeleton has been proven to be promising candidates for all-polymer solar cells(all-PSCs), due to their remarkable improved light absorption than the traditional imide-...Polymer acceptors based on extended fused ring p skeleton has been proven to be promising candidates for all-polymer solar cells(all-PSCs), due to their remarkable improved light absorption than the traditional imide-based polymer acceptors. To expand structural diversity of the polymer acceptors, herein,two polymer acceptors PSF-IDIC and PSi-IDIC with extended fused ring p skeleton are developed by copolymerization of 2,20-((2 Z,20 Z)-((4,4,9,9-tetrahexadecyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b']dithio phene-2,7-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile(IDIC-C16) block with sulfur(S) and fluorine(F) functionalized benzodithiophene(BDT) unit and silicon(Si) atom functionalized BDT unit, respectively. Both polymer acceptors exhibit strong light absorption.The PSF-IDIC exhibits similar energy levels and slightly higher absorption coefficient relative to the PSi-IDIC. After blended with the donor polymer PM6, the functional atoms on the polymer acceptors show quite different effect on the device performance. Both of the acceptors deliver a notably high open circuit voltage(V_(OC)) of the devices, but PSi-IDIC achieves higher V OCthan PSF-IDIC. All-PSC based on PM6:PSi-IDIC attains a power conversion efficiency(PCE) of 8.29%, while PM6:PSF-IDIC-based device achieves a much higher PCE of 10.18%, which is one of the highest values for the all-PSCs reported so far. The superior device performance of PM6:PSF-IDIC is attributed to its higher exciton dissociation and charge transport, decreased charge recombination, and optimized morphology than PM6:PSi-IDIC counterpart. These results suggest that optimizing the functional atoms of the side chain provide an effective strategy to develop high performance polymer acceptors for all-PSCs.展开更多
Finding effective molecular design strategies to enable efficient charge generation,high charge transport,and small energy loss is a longstanding challenge for developing high-performance all-polymer solar cells(all-P...Finding effective molecular design strategies to enable efficient charge generation,high charge transport,and small energy loss is a longstanding challenge for developing high-performance all-polymer solar cells(all-PSCs).Here,we designed and synthesized a fused-aromatic-ring-constructed near-infrared(NIR)polymer acceptor(PA)PYT-Tz with fused-ring benzotriazole(BTz)-based A’-DAD-A’structure as electron-deficient-core,n-nonane as alkyl-side-chain and thiophene asπ-bridge,and achieved a power conversion efficiency(PCE)of 15.10%for the all-PSCs with PYT-Tz as acceptor and a wide-bandgap PBDB-T as donor.A control PA PYT reported by our lab recently was introduced for investigating the synergistic effect of the electron-deficient-core and alkyl-side-chain on the optoelectronic properties and photovoltaic performance of the n-type PAs.Compared with PYT,the designed PYT-Tz exhibits intense and red-shifted absorption,upshifted energy levels,high electron mobility and ordered molecular packing in the active layers,and,blended with PBDB-T,yields the efficient hole injection,ultrafast charge generation,and the decreased non-radiative recombination loss of 0.17 eV.Of note is that the PCE of 15.10%is one of the highest PCE values for an all-PSC reported to date.Our results indicate BTz-based fused-aromatic-ring-constructed PAs are promising NIR acceptors in the all-PSCs.展开更多
The active layer of all polymer solar cells(all-PSCs)is composed of a blend of a p-type conjugated polymer(p-CP)as donor and an n-type conjugated polymer(n-CP)as acceptor.All-PSCs possess the advantages of light weigh...The active layer of all polymer solar cells(all-PSCs)is composed of a blend of a p-type conjugated polymer(p-CP)as donor and an n-type conjugated polymer(n-CP)as acceptor.All-PSCs possess the advantages of light weight,thin active layer,mechanical flexibility,low cost solution processing and high stability,but the power conversion efficiency(PCE)of the all-PSCs was limited by the poor photovoltaic performance of the n-CP acceptors before 2016.Since the report of the strategy of polymerized small molecule acceptors(PSMAs)in 2017,the photovoltaic performance of the PSMA-based n-CPs improved rapidly,benefitted from the development of the A-DA’D-A type small molecule acceptors(SMAs).PCE of the all-PSCs based on the PSMA acceptors reached 17%-18%recently.In this review article,we will introduce the development history of the n-CPs,especially the recent research progress of the PSMAs.Particularly,the structure-property relationship of the PSMAs is introduced and discussed.Finally,current challenges and prospects of the n-CP acceptors are analyzed and discussed.展开更多
Recently, the fused-ring based low band gap （LBG） small molecule acceptors （SMAs） have emerged as efficient nonfullerene acceptors. So far, these LBG SMAs are mainly designed with IC （2-methylene-（3- （1,1 -dicy...Recently, the fused-ring based low band gap （LBG） small molecule acceptors （SMAs） have emerged as efficient nonfullerene acceptors. So far, these LBG SMAs are mainly designed with IC （2-methylene-（3- （1,1 -dicyanomethylene）indanone）） or its analogs, the benzo-type electron-accepting （A） units. Compared to benzene, thiophene is less aromatic and thus the thiophene-involving semiconducting molecule has more quinoidal character, which effectively reduces the energy gap between the highest occupied molecular orbit （HOMO） and the lowest unoccupied molecular orbit （LUMO）. Herein, we show that replacing the IC units in ITIC with the CT （cyclopenta[c]thiophen-4-one-5-methylene-6-（1,1-dicyano- methylene））, a thiophene-fused A unit, the quinoidal character is enhanced from 0.0353 on ITIC to 0.0349 on ITCT, the CT-ended SMA. The increase in the quinoidal character reduces the optical band gap and enhances the near IR absorptivity. When blended with the wide band gap （WBG） polymer donor, PBDB-T, an average power conversion efficiency of 10.99% is obtained with a short-circuit current-density （Jso） of 17.88 mA/cm2 and a fill-factor （FF） of 0.723. For comparisons, theJsc is of 16.92 mA/cm2, FF is of 0.655 and PCE is of 9.94% obtained from the ITIC：PBDB-T device. This case indicates that the replacement of the benzene ring on the IC unit with a more polarizable five-member ring such as thiophene is an effective way to enhance the absorption of the near IR solar photons towards designing high-performance nonfullerene polymer solar cells.展开更多
Polymerizing the narrow bandgap small-molecule architecture with a conjugated linking unit(or called the polymerized small molecule acceptors(PSMAs))is a promising strategy to design polymer acceptors for efficient al...Polymerizing the narrow bandgap small-molecule architecture with a conjugated linking unit(or called the polymerized small molecule acceptors(PSMAs))is a promising strategy to design polymer acceptors for efficient all polymer solar cells(all-PSCs).Currently,the fused-ring-based small molecule acceptors(SMAs)are preferred monomers to design efficient PSMAs,leaving the challenge of reducing the materials cost.In this work,we firstly employ nonfused-core SMA with simple synthetic procedures to design PSMAs(namely PBTI-H,PBTI-F and PBTI-Cl)to address this issue.Relative to the fused-ring based counterparts,these three PSMAs exhibit much higher figure-of-merit value.Additionally,a power-conversion efficiency of 8.80%is achieved in the PBTI-Cl-based all-PSC.The results offer an attractive approach to design low-cost PSMAs for efficient all-PSCs.展开更多
Small molecule donor/polymer acceptor(SD/PA)-type organic solar cells(OSCs)have attracted widespread attention in recent years due to the continuing power conversion efficiency(PCE)growth,near 10%,and the excellent th...Small molecule donor/polymer acceptor(SD/PA)-type organic solar cells(OSCs)have attracted widespread attention in recent years due to the continuing power conversion efficiency(PCE)growth,near 10%,and the excellent thermal stability for the practical applications.However,the development of SD/PA-type OSCs lags far behind that of polymer donor/small molecule acceptor(PD/SA)-type OSCs,which are also based on the combination of small molecule and polymer,with the PCEs exceeding 18%.The reasons accounting for this great gap are well worth exploring.In this review,we have analyzed the key factors affecting the photovoltaic performances of SD/PA-type OSCs,systematically summarized the research progress of SD/PA type OSCs in recent years,and put forward our own views on the future development of SD/PA type OSCs.展开更多
One important subject in the field of all-polymer solar cells (all-PSCs) is the exploration of electron-deficient building blocks with optimized physicochemical properties to promote the performance of polymer accepto...One important subject in the field of all-polymer solar cells (all-PSCs) is the exploration of electron-deficient building blocks with optimized physicochemical properties to promote the performance of polymer acceptors. Here, two ladder-type heteroheptacene-containing small-molecule acceptors with branched 2-octyldodecyl or 2-hexyldecyl side-chains are synthesized and polymerized with the thiophene co-monomer to afford polymer acceptors (PW-OD and PW-HD) with strong near-infrared absorption. Experimental results reveal that the alkyl chain length has a large impact on the molecular packing behavior of the resulting polymers, which in turn affects their light-absorbing and charge transport properties, and thus the photovoltaic performance of the final devices. When blended with the polymer donor PM6, PW-HD-based all-PSCs deliver a higher power conversion efficiency (PCE) of 9.12% compared to the PCE of 6.47% for the PW-OD-based all-PSCs, mainly due to its more ordered inter-chain packing and more favorable blend morphology. This work provides a promising building block for the development of high-performance narrow-bandgap polymer acceptors and highlights the importance of side-chain substitution in optimizing the photovoltaic performance of polymer acceptors.展开更多
The development of new polymer acceptors strongly paves the power conversion efficiency(PCE)improvement of all polymer solar cells(all-PSCs).Herein,we develop a new polymer acceptor PBN26,which is the alternating copo...The development of new polymer acceptors strongly paves the power conversion efficiency(PCE)improvement of all polymer solar cells(all-PSCs).Herein,we develop a new polymer acceptor PBN26,which is the alternating copolymer of 2,2′-((2Z,2′Z)-((12,13-bis(2-octyldodecyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2-g]thieno[2′,3′:4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile and B←N bridged thienylthiazole(BNTT).The optimized all-PSCs device based on PBN26 exhibits a PCE of 15.09%,which is the highest value of the all-PSCs based on B←N-based polymer acceptors at present.Moreover,we also fabricate an all-PSC module with active area of 10 cm2 by blade coating,which exhibits a PCE of 8.78%.These results prove that polymer acceptors containing B←N units are promising for all-PSC device applications.展开更多
A widely-used naphthalenediimide （NDI） based electron acceptor P（NDI2OD-T2） with different number- average molecular weight （Mn） of 38 （N2200L）, 56 （N2200M）, 102 （N2200H） kDa were successfully prepared. Th...A widely-used naphthalenediimide （NDI） based electron acceptor P（NDI2OD-T2） with different number- average molecular weight （Mn） of 38 （N2200L）, 56 （N2200M）, 102 （N2200H） kDa were successfully prepared. The effect of molecular-weight on the performance of all-polymer solar cells based on Poly（5-（5-（4,8- bis（ 5-decylthiophen-2-yl ）-6-methylbenzo[1,2-b： 4,5-b＇]dithophen-2-yl ）thiophen-2-yl ）-6,7-difluoro-8- （5-methylthiophen-2-yl）-2,S-bis（3-（octyloxy）phenyl）quinoxaline） （P2F-DE）：N2200 was systematically investigated. The results reveal that N2200 with increased M. show enhanced intermolecular interac- tions, resulting in improved light absorption and electron mobility. However, the strong aggregation trend of N2200H can cause unfavorable morphology for exciton dissociation and carrier transport. The blend film using N2200 with moderate M. actually develops more ideal phase segregation for efficient charge separation and transport, leading to balanced electron/hole mobility and less carrier recombi- nation. Consequently, all-polymer solar cells employing P2F-DE as the electron donor and N2200M as the electron acceptor show the highest efficiency of 4.81%, outperforming those using N2200L （3,07~;） and N2200H （S,92%）. Thus, the Mn of the polymer acceptor plays an important role in all-polymer solar ceils, which allows it to be an effective parameter for the adjustment of the device morphology and efficiency.展开更多
Polymer electron acceptors are the key materials in all-polymer solar cells(all-PSCs).In this review,we focused on introducing the principle of boron-nitrogen coordination bond(B←N),and summarizing our recent researc...Polymer electron acceptors are the key materials in all-polymer solar cells(all-PSCs).In this review,we focused on introducing the principle of boron-nitrogen coordination bond(B←N),and summarizing our recent research on polymer electron acceptors containing B←N unit for efficient all-PSC devices.Two approaches have been reported to design polymer electron acceptors using B←N unit.One is to replace a C-C unit by a B←N unit in conjugated polymers to transform a polymer electron donor to a polymer electron acceptor.The other approach is to construct novel electron-deficient building block based on B←N unit for polymer electron acceptors.The polymer electron acceptors containing B←N unit showed tunable lowest unoccupied molecular orbital(LUMO) energy levels and exhibited excellent all-PSC device performance with power conversion efficiency of exceeding6%.These results indicate that organic boron chemistry is a new toolbox to develop functional polymer materials for optoelectronic device applications.展开更多
A series of novel acceptor-pended conjugated polymers featuring a newly developed carbazole-derived unit are designed and synthesized. The relationships between chemical structure and optoelectronic properties of the ...A series of novel acceptor-pended conjugated polymers featuring a newly developed carbazole-derived unit are designed and synthesized. The relationships between chemical structure and optoelectronic properties of the polymers are systematically in-vestigated. The control of UV-Vis absorption spectra and energy levels in resulting polymers are achieved by introducing suitable pended acceptor units. The photovoltaic properties of the resulting polymers are evaluated by blending the polymers with （6,6）-phenyl-CTFbutyric acid methyl ester. The resulting solar cells exhibit moderate performances with high open-circuit voltage. Charge transport properties and morphology were investigated to understand the performance of corresponding solar cells.展开更多
Herein,a theory-guided ternary construction case on boosting power conversion efficiency(PCE)for all-polymer solar cell(all-PSC)is reported,where vip acceptor's characteristics include high miscibility with host...Herein,a theory-guided ternary construction case on boosting power conversion efficiency(PCE)for all-polymer solar cell(all-PSC)is reported,where vip acceptor's characteristics include high miscibility with host polymer acceptor,significantly larger optical bandgap,and improved luminescence.Consequently,with only 10 wt%PFFO-Th(third component)addition,the PCE of binary control is promoted to 18.55%from 16.69%,a 11.1%relative increase,demonstrating the great effectiveness of this ternary strategy.Besides,the realized 18.55%efficiency is at state-of-the-art level of all-PSCs processed by ortho-xylene,a widely acknowledged green non-halogenated solvent by the field.This study shares new thought on designing high-performance photovoltaic devices with reduced energy losses and favorable charge dynamics,which would nourish future development on all-PSCs,and even other organic electronics.展开更多
All-polymer solar cells(all-PSCs)comprising polymer donors and polymer acceptors have attracted considerable attention due to their superior photo-thermal stability and mechanical stretchability[1-3].However,the early...All-polymer solar cells(all-PSCs)comprising polymer donors and polymer acceptors have attracted considerable attention due to their superior photo-thermal stability and mechanical stretchability[1-3].However,the early polymer acceptors exhibit weak absorption coefficients in the longer wavelength region(600-900 nm),limiting the photovoltaic performances of all-PSCs[4-8].In order to address this issue,polymerization of the state-of-the-art A-D-A smallmolecule acceptors(SMAs)viaπ-linkers was proposed to develop new polymer acceptors[9].The polymerized SMAs(PSMAs)can not only inherit the strong near-infrared absorption from the corresponding SMAs,but also have tunable electronic energy levels,thus greatly improving the photovoltaic performances of all-PSCs[10-20].Particularly,the power conversion efficiencies(PCEs)have even surpassed 19%for the all-PSCs based on the Y-series PSMAs and suitable polymer donors[21-24].展开更多
The non-fully conjugated polymer as a new class of acceptor materials has shown some advantages over its small molecular counterpart when used in photoactive layers for all-polymer solar cells(all-PSCs),despite a low ...The non-fully conjugated polymer as a new class of acceptor materials has shown some advantages over its small molecular counterpart when used in photoactive layers for all-polymer solar cells(all-PSCs),despite a low power conversion efficiency(PCE)caused by its narrow absorption spectra.Herein,a novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap of~1.40 eV was developed,via polymerizing a largeπ-fused small molecule acceptor(SMA)building block(namely YBO)with a non-conjugated thioalkyl linkage.Compared with its precursor YBO,PFY-2TS retains a similar low bandgap but a higher LUMO level.Moreover,compared with the structural analog of YBO-based fully conjugated polymer acceptor PFY-DTC,PFY-2TS shows a similar absorption spectrum and electron mobility,but significantly different molecular crystallinity and aggregation properties,which results in optimal blend morphology with a polymer donor PBDB-T and physical processes of the device in all-PSCs.As a result,PFY-2TS-based all-PSCs achieved a PCE of 12.31%with a small energy loss of 0.56 eV enabled by the reduced non-radiative energy loss(0.24 eV),which is better than that of 11.08%for the PFY-DTC-based ones.Our work clearly demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-PSCs.展开更多
The open-circuit voltage(Voc) of all-polymer solar cells(all-PSCs) is typically lower than 0.9 V even for the most efficient ones.Large energy loss is the main reason for limiting Voc and efficiency of all-PSCs. Herei...The open-circuit voltage(Voc) of all-polymer solar cells(all-PSCs) is typically lower than 0.9 V even for the most efficient ones.Large energy loss is the main reason for limiting Voc and efficiency of all-PSCs. Herein, through materials design using electron deficient building blocks based on bithiophene imides, the lowest unoccupied molecular orbital(LUMO) energy levels of polymer acceptors can be effectively tuned, which resulted in a reduced energy loss induced by charge generation and recombination loss due to the suppressed charge-transfer(CT) state absorption. Despite a negligible driving force, all-PSC based on the polymer donor and acceptor combination with well-aligned energy levels exhibited efficient charge transfer and achieved an external quantum efficiency over 70% while maintaining a large Voc of 1.02 V, leading to a 9.21% efficiency. Through various spectroscopy approaches, this work sheds light on the mechanism of energy loss in all-PSCs, which paves an avenue to achieving efficient all-PSCs with large Voc and drives the further development of all-PSCs.展开更多
基金Project(21875286)supported by the National Natural Science Foundation of China。
文摘The rational design of polymer acceptors with strong and broad absorption is critical to improve photovoltaic performance.In this work,a new polymer acceptor PY9-T based on heptacyclic benzotriazole(Y9-C16)as a building block and thiophene unit as the linking unit was synthesized,which exhibited a low bandgap(1.37 eV)and a high extinction coefficient of the neat film(1.44×10^(5) cm^(−1)).When PY9-T was blended with the wide bandgap polymer donor PBDB-T,the all-polymer solar cells(APSCs)showed a high power conversion efficiency(PCE)of 10.45%with both high open circuit voltage of 0.881 V and short-circuit current density of 19.82 mA/cm^(2).In addition,APSCs based on PY9-T show good thermal stability,as evidenced by slight changes morphologies when annealed at 100℃.These results suggest that Y9-C16 provides a new building block to develop efficient and stable polymer acceptors.
基金financially supported by the 973 Program(No.2014CB643504)the National Natural Science Foundation of China(Nos.51373165,21574129 and 21404099)+1 种基金the“Thousand Talents Program”of China,the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB12010200)the State Key Laboratory of Supramolecular Structure and Materials in Jilin University(No.sklssm201608)
文摘B-N coordination bond can be used to develop polymer electron acceptors for efficient all-polymer solar cells （all-PSCs）. Here, we report a new alternating conjugated polymer containing two building blocks based on B-N unit. The polymer exhibits strong light absorption in the visible range, low-lying LUMO/HOMO energy levels and moderate electron mobility. The resulting all-PSC devices exhibit power conversion efficiencies of 1.50%-2.47%.
基金National Natural Science Foundation of China,Grant/Award Numbers:21704082,21875182,22005121Key Scientific and Technological Innovation Team Project of Shaanxi Province,Grant/Award Number:2020TD‐002111 project 2.0,Grant/Award Number:BP2018008。
文摘The recently reported efficient polymerized small-molecule acceptors(PSMAs)usually adopt a regioregular backbone by polymerizing small-molecule acceptors precursors with a low-reactivity 5-brominated 3-(dicyanomethylidene)indan-1-one(IC)end group or its derivatives,leading to low molecular weight,and thus reduce active layer mechanical properties.Herein,a series of newly designed chlorinated PSMAs originating from isomeric IC end groups are developed by adjusting chlorinated positions and copolymerized sites on end groups to achieve high molecular weight,favorable intermolecular interaction,and improved physicochemical properties.Compared with regioregular PY2Se-Cl-o and PY2Se-Cl-m,regiorandom PY2Se-Cl-ran has a similar absorption profile,moderate lowest unoccupied molecular orbital level,and favorable intermolecular packing and crystallization properties.Moreover,the binary PM6:PY2Se-Cl-ran blend achieves better ductility with a crack-onset strain of 17.5% and improved power conversion efficiency(PCE)of 16.23% in all-polymer solar cells(all-PSCs)due to the higher molecular weight of PY2Se-Cl-ran and optimized blend morphology,while the ternary PM6:J71:PY2Se-Cl-ran blend offers an impressive PCE approaching 17% and excellent device stability,which are all crucial for potential practical applications of all-PSCs in wearable electronics.To date,the efficiency of 16.86% is the highest value reported for the regiorandom PSMAs-based all-PSCs and is also one of the best values reported for the all-PSCs.Our work provides a new perspective to develop efficient all-PSCs,with all high active layer ductility,impressive PCE,and excellent device stability,towards practical applications.
基金financially supported by the National Natural Science Foundation of China(Nos.21674001 and 51473003)
文摘Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis（5-（2-ethylhexyl）thiophen-2-yl）benzo[ 1,2-b;4,5-b＇]dithiophene-2,6-diyl-alt-（4-（2-ethylhexyl）-3-fluorothieno[3,4- b]thiophene）-2-carboxylate-2,6-diyl] （PTB7-Th） and poly[（5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl）-alt-（3,3＇-di（2- dodecyltetradecyl）-2,2＇;5＇,2＂;5＂,2＇-quaterthiophen-5,5＇＂-diyl）] （PffBT4T-2DT）, with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th：poly[NN-bis（1-hexylheptyl）-3,4,9,10-pery,enediimide-1,6/1,7-diyl-alt-2,5-thiophene] （PDI-Th） exhibited the best power conversion efficiency （PCE） of 5.13%, with open-circuit voltage （Vo：） = 0.79 lV, short-circuit current density （Jsc） = 12.35 mA.cm-2 and fill-factor （FF） = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor post- treatment is required for obtaining such a cell performance.
基金the Swedish Research Council (2016-06146,2019-02345)Swedish Research Council (grant no.2020-05223)+7 种基金the Swedish Research Council Formas,the Swedish Energy Agency (52473-1)the Wallenberg Foundation (2017.0186 and 2016.0059) for financial supportsupported by the National Research Foundation of Korea (NRF-2017M3A7B8065584 and 2020R1A4A1018516)Support from the National Natural Science Foundation of China (61774077)the Key Projects of Joint Fund of Basic and Applied Basic Research Fund of Guangdong Province (2019B1515120073)the Research Fund of Guangdong-Hong Kong-Macao Joint Laboratory for Intelligent Micro-Nano Optoelectronic Technology (No.2020B1212030010)Support from Sino-Danish Center for Education and ResearchSwedish Energy Agency (grant no.45420-1)
文摘All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)into backbones of polymer donor(P_(D))or polymer acceptor(P_(A))has been demonstrated as an efficient approach to enhance both the photovoltaic(PV)and mechanical properties of the all-PSCs.However,length dependency of FCBS on certain all-PSC related properties has not been systematically explored.In this regard,we report a series of new non-conjugated P_(A)s by incorporating FCBS with various lengths(2,4,and 8 carbon atoms in thioalkyl segments).Unlike com-mon studies on so-called side-chain engineering,where longer side chains would lead to better solubility of those resulting polymers,in this work,we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length(i.e.,C2)in P_(A) named PYTS-C2.Its all-PSC achieves a high efficiency of 11.37%,and excellent mechanical robustness with a crack onset strain of 12.39%,significantly superior to those of the other P_(A)s.These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs,providing an effective strategy to fine-tune the structures of P_(A)s for highly efficient and mechanically robust PSCs.
基金the National Natural Science Foundation of China (NSFC) (51673092, 51973087 and 21762029) for financial support。
文摘Polymer acceptors based on extended fused ring p skeleton has been proven to be promising candidates for all-polymer solar cells(all-PSCs), due to their remarkable improved light absorption than the traditional imide-based polymer acceptors. To expand structural diversity of the polymer acceptors, herein,two polymer acceptors PSF-IDIC and PSi-IDIC with extended fused ring p skeleton are developed by copolymerization of 2,20-((2 Z,20 Z)-((4,4,9,9-tetrahexadecyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b']dithio phene-2,7-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile(IDIC-C16) block with sulfur(S) and fluorine(F) functionalized benzodithiophene(BDT) unit and silicon(Si) atom functionalized BDT unit, respectively. Both polymer acceptors exhibit strong light absorption.The PSF-IDIC exhibits similar energy levels and slightly higher absorption coefficient relative to the PSi-IDIC. After blended with the donor polymer PM6, the functional atoms on the polymer acceptors show quite different effect on the device performance. Both of the acceptors deliver a notably high open circuit voltage(V_(OC)) of the devices, but PSi-IDIC achieves higher V OCthan PSF-IDIC. All-PSC based on PM6:PSi-IDIC attains a power conversion efficiency(PCE) of 8.29%, while PM6:PSF-IDIC-based device achieves a much higher PCE of 10.18%, which is one of the highest values for the all-PSCs reported so far. The superior device performance of PM6:PSF-IDIC is attributed to its higher exciton dissociation and charge transport, decreased charge recombination, and optimized morphology than PM6:PSi-IDIC counterpart. These results suggest that optimizing the functional atoms of the side chain provide an effective strategy to develop high performance polymer acceptors for all-PSCs.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.21702154 and 51773157)We also thank the support of the opening project of Key Laboratory of Materials Processing and Mold and Beijing National Laboratory for Molecular Sciences(No.BNLMS201905).
文摘Finding effective molecular design strategies to enable efficient charge generation,high charge transport,and small energy loss is a longstanding challenge for developing high-performance all-polymer solar cells(all-PSCs).Here,we designed and synthesized a fused-aromatic-ring-constructed near-infrared(NIR)polymer acceptor(PA)PYT-Tz with fused-ring benzotriazole(BTz)-based A’-DAD-A’structure as electron-deficient-core,n-nonane as alkyl-side-chain and thiophene asπ-bridge,and achieved a power conversion efficiency(PCE)of 15.10%for the all-PSCs with PYT-Tz as acceptor and a wide-bandgap PBDB-T as donor.A control PA PYT reported by our lab recently was introduced for investigating the synergistic effect of the electron-deficient-core and alkyl-side-chain on the optoelectronic properties and photovoltaic performance of the n-type PAs.Compared with PYT,the designed PYT-Tz exhibits intense and red-shifted absorption,upshifted energy levels,high electron mobility and ordered molecular packing in the active layers,and,blended with PBDB-T,yields the efficient hole injection,ultrafast charge generation,and the decreased non-radiative recombination loss of 0.17 eV.Of note is that the PCE of 15.10%is one of the highest PCE values for an all-PSC reported to date.Our results indicate BTz-based fused-aromatic-ring-constructed PAs are promising NIR acceptors in the all-PSCs.
基金financially supported by the National Natural Science Foundation of China(Nos.61904181,51820105003,52173188 and 21734008)the Basic and Applied Basic Research Major Program of Guangdong Province(No.2019B030302007)。
文摘The active layer of all polymer solar cells(all-PSCs)is composed of a blend of a p-type conjugated polymer(p-CP)as donor and an n-type conjugated polymer(n-CP)as acceptor.All-PSCs possess the advantages of light weight,thin active layer,mechanical flexibility,low cost solution processing and high stability,but the power conversion efficiency(PCE)of the all-PSCs was limited by the poor photovoltaic performance of the n-CP acceptors before 2016.Since the report of the strategy of polymerized small molecule acceptors(PSMAs)in 2017,the photovoltaic performance of the PSMA-based n-CPs improved rapidly,benefitted from the development of the A-DA’D-A type small molecule acceptors(SMAs).PCE of the all-PSCs based on the PSMA acceptors reached 17%-18%recently.In this review article,we will introduce the development history of the n-CPs,especially the recent research progress of the PSMAs.Particularly,the structure-property relationship of the PSMAs is introduced and discussed.Finally,current challenges and prospects of the n-CP acceptors are analyzed and discussed.
基金the financial support from the National Natural Science Foundation of China(NSFC, Nos. 91433202, 91227112 and 21221002)Chinese Academy of Sciences(CAS, No. XDB12010200)
文摘Recently, the fused-ring based low band gap （LBG） small molecule acceptors （SMAs） have emerged as efficient nonfullerene acceptors. So far, these LBG SMAs are mainly designed with IC （2-methylene-（3- （1,1 -dicyanomethylene）indanone）） or its analogs, the benzo-type electron-accepting （A） units. Compared to benzene, thiophene is less aromatic and thus the thiophene-involving semiconducting molecule has more quinoidal character, which effectively reduces the energy gap between the highest occupied molecular orbit （HOMO） and the lowest unoccupied molecular orbit （LUMO）. Herein, we show that replacing the IC units in ITIC with the CT （cyclopenta[c]thiophen-4-one-5-methylene-6-（1,1-dicyano- methylene））, a thiophene-fused A unit, the quinoidal character is enhanced from 0.0353 on ITIC to 0.0349 on ITCT, the CT-ended SMA. The increase in the quinoidal character reduces the optical band gap and enhances the near IR absorptivity. When blended with the wide band gap （WBG） polymer donor, PBDB-T, an average power conversion efficiency of 10.99% is obtained with a short-circuit current-density （Jso） of 17.88 mA/cm2 and a fill-factor （FF） of 0.723. For comparisons, theJsc is of 16.92 mA/cm2, FF is of 0.655 and PCE is of 9.94% obtained from the ITIC：PBDB-T device. This case indicates that the replacement of the benzene ring on the IC unit with a more polarizable five-member ring such as thiophene is an effective way to enhance the absorption of the near IR solar photons towards designing high-performance nonfullerene polymer solar cells.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.22022509,51873140 and 51820105003)Jiangsu Provincial Natural Science Foundation(No.BK20190095)+1 种基金Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.21KJA150006)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),and Collaborative Innovation Center of Suzhou Nano Science and Technology.
文摘Polymerizing the narrow bandgap small-molecule architecture with a conjugated linking unit(or called the polymerized small molecule acceptors(PSMAs))is a promising strategy to design polymer acceptors for efficient all polymer solar cells(all-PSCs).Currently,the fused-ring-based small molecule acceptors(SMAs)are preferred monomers to design efficient PSMAs,leaving the challenge of reducing the materials cost.In this work,we firstly employ nonfused-core SMA with simple synthetic procedures to design PSMAs(namely PBTI-H,PBTI-F and PBTI-Cl)to address this issue.Relative to the fused-ring based counterparts,these three PSMAs exhibit much higher figure-of-merit value.Additionally,a power-conversion efficiency of 8.80%is achieved in the PBTI-Cl-based all-PSC.The results offer an attractive approach to design low-cost PSMAs for efficient all-PSCs.
基金supported financially by the National Natural Science Foundation of China(Nos.51803040,51822301,21673059,91963126,21822503,and 51973043)the Ministry of Science and Technology of the People’s Republic of China(Nos.2016YFA0200700,2017YFA0206600)+4 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB36020000)Beijing National Laboratory for Molecular Sciences(No.BNLMS201907)Youth Innovation Promotion AssociationK.C.Wong Education Foundationthe CAS Pioneer Hundred Talents Program。
文摘Small molecule donor/polymer acceptor(SD/PA)-type organic solar cells(OSCs)have attracted widespread attention in recent years due to the continuing power conversion efficiency(PCE)growth,near 10%,and the excellent thermal stability for the practical applications.However,the development of SD/PA-type OSCs lags far behind that of polymer donor/small molecule acceptor(PD/SA)-type OSCs,which are also based on the combination of small molecule and polymer,with the PCEs exceeding 18%.The reasons accounting for this great gap are well worth exploring.In this review,we have analyzed the key factors affecting the photovoltaic performances of SD/PA-type OSCs,systematically summarized the research progress of SD/PA type OSCs in recent years,and put forward our own views on the future development of SD/PA type OSCs.
基金supported by the National Natural Science Foundation of China(Nos.52130306,22075287 and 22101285)the Nature Science Foundation of Fujian Province(No.2021J01515)the Program of Youth Innovation Promotion Association CAS(No.2021299).
文摘One important subject in the field of all-polymer solar cells (all-PSCs) is the exploration of electron-deficient building blocks with optimized physicochemical properties to promote the performance of polymer acceptors. Here, two ladder-type heteroheptacene-containing small-molecule acceptors with branched 2-octyldodecyl or 2-hexyldecyl side-chains are synthesized and polymerized with the thiophene co-monomer to afford polymer acceptors (PW-OD and PW-HD) with strong near-infrared absorption. Experimental results reveal that the alkyl chain length has a large impact on the molecular packing behavior of the resulting polymers, which in turn affects their light-absorbing and charge transport properties, and thus the photovoltaic performance of the final devices. When blended with the polymer donor PM6, PW-HD-based all-PSCs deliver a higher power conversion efficiency (PCE) of 9.12% compared to the PCE of 6.47% for the PW-OD-based all-PSCs, mainly due to its more ordered inter-chain packing and more favorable blend morphology. This work provides a promising building block for the development of high-performance narrow-bandgap polymer acceptors and highlights the importance of side-chain substitution in optimizing the photovoltaic performance of polymer acceptors.
基金This work was financially supported by the National Key Research and Development Program of China(No.2019YFA0705902)funded by MOSTthe National Natural Science Foundation of China(Nos.21875244 and 22135007).
文摘The development of new polymer acceptors strongly paves the power conversion efficiency(PCE)improvement of all polymer solar cells(all-PSCs).Herein,we develop a new polymer acceptor PBN26,which is the alternating copolymer of 2,2′-((2Z,2′Z)-((12,13-bis(2-octyldodecyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2-g]thieno[2′,3′:4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile and B←N bridged thienylthiazole(BNTT).The optimized all-PSCs device based on PBN26 exhibits a PCE of 15.09%,which is the highest value of the all-PSCs based on B←N-based polymer acceptors at present.Moreover,we also fabricate an all-PSC module with active area of 10 cm2 by blade coating,which exhibits a PCE of 8.78%.These results prove that polymer acceptors containing B←N units are promising for all-PSC device applications.
基金was supported by the National Natural Science Foundation of China(Grant Nos.61176054 and 61222401)the Natural Science Foundation of Jiangsu Province(No.BK20130311)+1 种基金the Postdoctoral Science Foundation(Grant Nos.2014M550302 and 1302015A)the Collaborative Innovation Center of Suzhou Nano Science and Technology,the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘A widely-used naphthalenediimide （NDI） based electron acceptor P（NDI2OD-T2） with different number- average molecular weight （Mn） of 38 （N2200L）, 56 （N2200M）, 102 （N2200H） kDa were successfully prepared. The effect of molecular-weight on the performance of all-polymer solar cells based on Poly（5-（5-（4,8- bis（ 5-decylthiophen-2-yl ）-6-methylbenzo[1,2-b： 4,5-b＇]dithophen-2-yl ）thiophen-2-yl ）-6,7-difluoro-8- （5-methylthiophen-2-yl）-2,S-bis（3-（octyloxy）phenyl）quinoxaline） （P2F-DE）：N2200 was systematically investigated. The results reveal that N2200 with increased M. show enhanced intermolecular interac- tions, resulting in improved light absorption and electron mobility. However, the strong aggregation trend of N2200H can cause unfavorable morphology for exciton dissociation and carrier transport. The blend film using N2200 with moderate M. actually develops more ideal phase segregation for efficient charge separation and transport, leading to balanced electron/hole mobility and less carrier recombi- nation. Consequently, all-polymer solar cells employing P2F-DE as the electron donor and N2200M as the electron acceptor show the highest efficiency of 4.81%, outperforming those using N2200L （3,07~;） and N2200H （S,92%）. Thus, the Mn of the polymer acceptor plays an important role in all-polymer solar ceils, which allows it to be an effective parameter for the adjustment of the device morphology and efficiency.
基金supported by the National Key Basic Research and Development Program of China(2014CB643504,2015CB655001)the National Natural Science Foundation of China(51373165,21625403,21574129,21404099)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(XDB12010200)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(2017265)
文摘Polymer electron acceptors are the key materials in all-polymer solar cells(all-PSCs).In this review,we focused on introducing the principle of boron-nitrogen coordination bond(B←N),and summarizing our recent research on polymer electron acceptors containing B←N unit for efficient all-PSC devices.Two approaches have been reported to design polymer electron acceptors using B←N unit.One is to replace a C-C unit by a B←N unit in conjugated polymers to transform a polymer electron donor to a polymer electron acceptor.The other approach is to construct novel electron-deficient building block based on B←N unit for polymer electron acceptors.The polymer electron acceptors containing B←N unit showed tunable lowest unoccupied molecular orbital(LUMO) energy levels and exhibited excellent all-PSC device performance with power conversion efficiency of exceeding6%.These results indicate that organic boron chemistry is a new toolbox to develop functional polymer materials for optoelectronic device applications.
基金supported by the Ministry of Science and Technology(2014CB643501)the National Natural Science Foundation of China(21520102006,21490573,51361165301)the Guangdong Natural Science Foundation(S2012030006232)
文摘A series of novel acceptor-pended conjugated polymers featuring a newly developed carbazole-derived unit are designed and synthesized. The relationships between chemical structure and optoelectronic properties of the polymers are systematically in-vestigated. The control of UV-Vis absorption spectra and energy levels in resulting polymers are achieved by introducing suitable pended acceptor units. The photovoltaic properties of the resulting polymers are evaluated by blending the polymers with （6,6）-phenyl-CTFbutyric acid methyl ester. The resulting solar cells exhibit moderate performances with high open-circuit voltage. Charge transport properties and morphology were investigated to understand the performance of corresponding solar cells.
基金supported by Guangdong Natural Science Foundation(No.2021B1515120073)the Guangdong Provincial Science and Technology Foundation(No.2022A0505050068)+2 种基金the Jiangxi Provincial Natural Science Foundation(No.20224BAB204033)Hubei Provincial Natural Science Foundation of China(2024AFB950)Excellent Discipline Cultivation Project by JHUN(2023XKz031).R.Ma acknowledges the support from PolyU Distinguished Postdoctoral Fellowship(1-YW4C).
文摘Herein,a theory-guided ternary construction case on boosting power conversion efficiency(PCE)for all-polymer solar cell(all-PSC)is reported,where vip acceptor's characteristics include high miscibility with host polymer acceptor,significantly larger optical bandgap,and improved luminescence.Consequently,with only 10 wt%PFFO-Th(third component)addition,the PCE of binary control is promoted to 18.55%from 16.69%,a 11.1%relative increase,demonstrating the great effectiveness of this ternary strategy.Besides,the realized 18.55%efficiency is at state-of-the-art level of all-PSCs processed by ortho-xylene,a widely acknowledged green non-halogenated solvent by the field.This study shares new thought on designing high-performance photovoltaic devices with reduced energy losses and favorable charge dynamics,which would nourish future development on all-PSCs,and even other organic electronics.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0520102)the National Key R&D Program of China(2024YFA1209600)+1 种基金the National Natural Science Foundation of China(22173108)the Youth Innovation Promotion Association CAS(2023037).
文摘All-polymer solar cells(all-PSCs)comprising polymer donors and polymer acceptors have attracted considerable attention due to their superior photo-thermal stability and mechanical stretchability[1-3].However,the early polymer acceptors exhibit weak absorption coefficients in the longer wavelength region(600-900 nm),limiting the photovoltaic performances of all-PSCs[4-8].In order to address this issue,polymerization of the state-of-the-art A-D-A smallmolecule acceptors(SMAs)viaπ-linkers was proposed to develop new polymer acceptors[9].The polymerized SMAs(PSMAs)can not only inherit the strong near-infrared absorption from the corresponding SMAs,but also have tunable electronic energy levels,thus greatly improving the photovoltaic performances of all-PSCs[10-20].Particularly,the power conversion efficiencies(PCEs)have even surpassed 19%for the all-PSCs based on the Y-series PSMAs and suitable polymer donors[21-24].
基金This work was supported by the Swedish Research Council(2015-04853,2016-06146,2019-04683)the Swedish Research Council Formas,the Knut and Alice Wallenberg Foundation(2017.0186,2016.0059)+5 种基金the Open Fund of the State Key Laboratory of Luminescent Materials and Devices(South China University of Technology,2020-skllmd-07)E.Moons thanks the Swedish Energy Council for financial support(project 48598-1)W.Su thanks the project funded by China Postdoctoral Science Foundation(2020M673054)Postdoctoral Fund of Jinan University,and the National Natural Science Foundation of China(22005121)L.Hou thanks the National Natural Science Foundation of China(61774077)Support from Sino-Danish Centre for Education and Research is fully acknowledged by D.Yu.Y.Li thanks the financial support from the Science and Technology Program of Shanxi Province(2019JQ-244).
文摘The non-fully conjugated polymer as a new class of acceptor materials has shown some advantages over its small molecular counterpart when used in photoactive layers for all-polymer solar cells(all-PSCs),despite a low power conversion efficiency(PCE)caused by its narrow absorption spectra.Herein,a novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap of~1.40 eV was developed,via polymerizing a largeπ-fused small molecule acceptor(SMA)building block(namely YBO)with a non-conjugated thioalkyl linkage.Compared with its precursor YBO,PFY-2TS retains a similar low bandgap but a higher LUMO level.Moreover,compared with the structural analog of YBO-based fully conjugated polymer acceptor PFY-DTC,PFY-2TS shows a similar absorption spectrum and electron mobility,but significantly different molecular crystallinity and aggregation properties,which results in optimal blend morphology with a polymer donor PBDB-T and physical processes of the device in all-PSCs.As a result,PFY-2TS-based all-PSCs achieved a PCE of 12.31%with a small energy loss of 0.56 eV enabled by the reduced non-radiative energy loss(0.24 eV),which is better than that of 11.08%for the PFY-DTC-based ones.Our work clearly demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-PSCs.
基金Guo X is grateful to the Shenzhen Science and Technology Innovation Commission(JCYJ20170817105905899,JCYJ20180504165709042)Sun H thanks the National Natural Science Foundation of China(21801124)+3 种基金Liu B thanks China Scholarship Council Fund(201906010074)This work was supported by the National Natural Science Foundation of China(21903017)the Center for Computational Science and Engineering of Southern University of Science and Technology(SUSTech)We thank Ziang Wu and Han Young Woo at Korea University for performing GIWAXS measurements,thank Dr.Yinhua Yang at the Materials Characterization and Preparation Center,SUSTech for NMR measurement.
文摘The open-circuit voltage(Voc) of all-polymer solar cells(all-PSCs) is typically lower than 0.9 V even for the most efficient ones.Large energy loss is the main reason for limiting Voc and efficiency of all-PSCs. Herein, through materials design using electron deficient building blocks based on bithiophene imides, the lowest unoccupied molecular orbital(LUMO) energy levels of polymer acceptors can be effectively tuned, which resulted in a reduced energy loss induced by charge generation and recombination loss due to the suppressed charge-transfer(CT) state absorption. Despite a negligible driving force, all-PSC based on the polymer donor and acceptor combination with well-aligned energy levels exhibited efficient charge transfer and achieved an external quantum efficiency over 70% while maintaining a large Voc of 1.02 V, leading to a 9.21% efficiency. Through various spectroscopy approaches, this work sheds light on the mechanism of energy loss in all-PSCs, which paves an avenue to achieving efficient all-PSCs with large Voc and drives the further development of all-PSCs.
