This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early applic...This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early application of fusion technology. The necessity and feasibility to develop that system in China are illustrated on the basis of prediction of the demand of energy source in the first half of the 21th century, the status of current fission energy supply and the progress in fusion technology in the world. The characteristics of fusion neutron driver and the potential for transmutation of long-lived nuclear wastes and breeding of fissile nuclear fuel in a blanket are analyzed. A scenario of development steps is proposed.展开更多
This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different ...This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.展开更多
The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation. However, with the increase of mining depth, sub-critical extrac...The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation. However, with the increase of mining depth, sub-critical extraction has become a general phenomenon. This calls for an in-depth investigation into the characteristics of ground movements observed under different extents of sub-critical extraction, so as to determine the appropriate mining technique for use. Following a discussion of the factors influencing the extent of super-critical extraction, the super-critical extraction extent evaluation criteria was presented, the characteristics and laws of the strata and ground movements caused by such an extraction condition were systematically analyzed, and the mechanism of surface subsidence induced by sub-critical extraction was revealed. The result of study may serve as a basis for the development of the strata and ground movement prediction model and the mining techniques appropriate for use at depth beneath surface structures and buildings.展开更多
Membrane fouling is often considered as a hindrance for the application of microfiltration/ultrafiltration(MF/UF) for drinking water production. A novel process of photocatalytic membrane reactor/dynamic membrane(PMR/...Membrane fouling is often considered as a hindrance for the application of microfiltration/ultrafiltration(MF/UF) for drinking water production. A novel process of photocatalytic membrane reactor/dynamic membrane(PMR/DM), operating in a continuous mode under sub-critical flux, was proposed for the mitigation of membrane fouling caused by humic acids(HAs) in water. The mechanism of membrane fouling alleviation with synergistic photocatalytic oxidation and dynamic layer isolating effect was comprehensively investigated from the characterization of foulant evolution responsible for the reversible and irreversible fouling. The results showed that the PMR/DM utilized photocatalytic oxidation to enhance the porosity and hydrophilicity of the fouling layer by converting the high molecular weight(MW) and hydrophobic HA molecules with carboxylic functional groups and aromatic structures into low-MW hydrophilic or transphilic fractions, including tryptophan-like or fulvic-like substances. The fouling layer formed in the PMR/DM by combination of photocatalytic oxidation and DM running at a sub-critical flux of 100 L·h^-1·m^-2, was more hydrophilic and more porous, resulting in the lowest trans-membrane pressure(TMP) growth rates, as compared to the processes of ceramic membrane(CM), DM and PMR/CM.Meanwhile, the dynamic layer prevented the foulants, particularly the high-MW hydrophobic fractions,from contacting the primary membrane, which enabled the membrane permeability to be restored easily.展开更多
In-plane shear crack sub-critical propagation of rock at high temperature was studied by finite element method and shear-box(i.e.compression-shear) test with newly designed electrically conductive adhesive method.Nume...In-plane shear crack sub-critical propagation of rock at high temperature was studied by finite element method and shear-box(i.e.compression-shear) test with newly designed electrically conductive adhesive method.Numerical and experimental results show that the normalized shear(Mode Ⅱ) stress intensity factors,K ⅡT/KT0 is decreased as the temperature increases because high temperature can improve stress distribution at crack tip and reduce the Mode Ⅱ stress intensity factor.Microscopic features of fractured surface are of little pits and secondary micro-cracks in the vicinity(1.5-4.0 mm) of the crack tip.The chevron-shape secondary cracks gradually merge in the length of about 4-5 mm and disappear along the direction of crack propagation.Stable shear crack propagation time is increased with the increasing temperature while the stable shear crack propagation rate is decreased with the increasing temperature,since high temperature can increase the shear(Mode Ⅱ) fracture toughness and prevent the crack growth.It is necessary to ensure the ligament of specimen long enough to measure the maximum unstable crack propagation rate of rock.展开更多
Shear-box(i.e.compression-shear) test and newly designed electrically conductive adhesive method were used to measure shear crack sub-critical propagation time and rate of sandstone specimen.Different cubic specimens ...Shear-box(i.e.compression-shear) test and newly designed electrically conductive adhesive method were used to measure shear crack sub-critical propagation time and rate of sandstone specimen.Different cubic specimens with and without holes were tested to study the effect of holes on the shear crack sub-critical propagation.Numerical and experimental results show that three independent variables of hole,the interval distance S,the distance between the center of hole and the crack tip L,and hole radius R,have different contribution to the ratio of stress intensity factor of the specimen with holes to that of the specimen without hole,KⅡ/KⅡ0.Increasing S and decreasing L and R will result in the decrease of KⅡ/KⅡ0 and help crack arrest.The weight relation of the independent variables for KⅡ/KⅡ0 is S>L>R.The specimen DH3 with the largest value of S and the smallest values of L and R has the longest sub-critical crack propagation time and the smallest sub-critical crack propagation rate.Adding two suitable holes symmetrically to the original crack plane in rock specimen is considered to be a potential method for crack arrest of rock.展开更多
In reactor physics tests, it is important to monitor sub-criticality continuously during criticality approach. Reactivity measurements by the inverse kinetics method are widely used during the operation of a nuclear r...In reactor physics tests, it is important to monitor sub-criticality continuously during criticality approach. Reactivity measurements by the inverse kinetics method are widely used during the operation of a nuclear reactor. This technique is successfully applied at sufficiently high power level or to a core without an external neutron source where the neutron source term in point reactor kinetics equations may be neglected. For operation at low power levels or in the sub-critical domain, the increase in the fluctuation of the neutron signal may cause difficulties in the evaluation of reactivity and the effect of direct emission from the external neutron source may not be neglected. Therefore, contribution of the neutron source must be taken into account and this implies knowledge of a quantity proportional to the source strength, which calls the source term and then it should be determined. The research work has been conducted to measure reactivity with source term using a dedicated reactivity measurement system by the Least Square Inverse Kinetics Method (LSIKM). Application to a simulator of HANARO research reactor, Korea Atomic Energy Research Institute (KAERI), with known source strength and reactivity worth has showed consistent and satisfactory agreement.展开更多
Hydrothermal liquefaction of wheat straw in sub-critical water with ionic liquid was investigated in an autoclave. The product distribution at different temperatures and pressures was studied. The liquid oil and the r...Hydrothermal liquefaction of wheat straw in sub-critical water with ionic liquid was investigated in an autoclave. The product distribution at different temperatures and pressures was studied. The liquid oil and the residuals were tested by 1H NMR, FTIR and SEM techniques. The results indicated that under the same conditions, the oil yield from liquefaction of wheat straw in water/ethanol was higher than that in sub-critical water. The result also showed that under the investigated conditions, adding 1-butyl-3-methylimidazolium chloride([Bmim]Cl) could increase the total conversion and gas yield, while at the same time the yield of n-hexane insoluble fraction and the tetrahydrofuran soluble fraction was reduced. Moreover, the results also showed that upon adding [Bmim]Cl the contents of the aliphatic hydrogen and phenols in liquid oil also increased along with improved oil quality.展开更多
The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTI...The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTIR,GC-MS,1HNMR,and 13CNMR techniques.The test results showed that the synergistic effect of co-liquefaction was obvious when the ratio of cotton seed and flospopuli was 1:1 without additives.The additives,such as 12-phosphotungstic acid(PW12),HZSM-5,PW12/HZSM-5 and modified medical stone(MS),PW12/MS,Ni/MS,Co/MS,Mo/MS and Co-Mo/MS,could increase the bio-oil yield;and the modified MS resulted in higher liquefied oil yield than that achieved by MS.Furthermore,additives such as Ni/MS,Mo/MS,and Co-Mo/MS also could increase the yield of aliphatic hydrocarbons in liquefied oil.The addition of Co-Mo/MS could lead to a highest liquefied oil yield of 28.8%,while the additive of PW12/HZSM-5 could result in a highest total conversion of 81.6%.Results also revealed that additives,such as PW12/MS,PW12,PW12/HZSM-5,Ni/MS,Co/MS,Mo/MS,and Co-Mo/MS,could increase the H2 production and decrease the CO2 production in gas products.展开更多
Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants tradit...Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants traditionally used in Europe and Asia to produce pharmaceutical extracts (such as volatile oil, tannins, flavonoids, anthraquinone, lactone, etc.). Meanwhile, the prospect of sub-critical water extraction in plant extractives is also explored. It will be widely used in the field of medical plants, bringing huge economic benefits, environmental benefits and social benefits.展开更多
[Objectives] To study the optimal conditions for extracting procyanidins fromLycium ruthenicum Murr. with sub-critical fluid R134 a( 1,1,1,2-tetrafluoroethane) in 1 L extraction kettle. [Methods]Taking the extraction ...[Objectives] To study the optimal conditions for extracting procyanidins fromLycium ruthenicum Murr. with sub-critical fluid R134 a( 1,1,1,2-tetrafluoroethane) in 1 L extraction kettle. [Methods]Taking the extraction rate of procyanidins as an indicator,the influence of pressure,temperature,and extraction time on extraction rate of procyanidins fromL. Ruthenicum Murr. was studied by single factor experimental methods and orthogonal array design. [Results]The order of factors affecting extraction rate of procyanidins was extraction temperature > extraction pressure > extraction time. The optimum extraction conditions were as follows: the extraction rate of procyanidins fromL. ruthenicum Murr. was the highest with extraction pressure of 1. 2 MPa,extraction temperature of 50℃ and extraction time of 90 min. The content of procyanidins in L. ruthenicum Murr. from different producing areas was determined by vanillin-HCl method under the optimal conditions. [Conclusions] The method has the advantages of easy operation,good selectivity,low extraction temperature and high extraction efficiency,which is suitable for extraction of procyanidins in L. ruthenicum Murr.展开更多
Owing to the immobility of traditional reactors and spallation neutron sources,the demand for compact thermal neutron radiography(CTNR)based on accelerator neutron sources has rapidly increased in industrial applicati...Owing to the immobility of traditional reactors and spallation neutron sources,the demand for compact thermal neutron radiography(CTNR)based on accelerator neutron sources has rapidly increased in industrial applications.Recently,thermal neutron radiography experiments based on a D-T neutron generator performed by Hefei Institutes of Physical Science indicated a significant resolution deviation between the experimental results and the values calculated using the traditional resolution model.The experimental result was up to 23%lower than the calculated result,which hinders the achievement of the design goal of a compact neutron radiography system.A GEANT4 Monte Carlo code was developed to simulate the CTNR process,aiming to identify the key factors leading to resolution deviation.The effects of a low collimation ratio and high-energy neutrons were analyzed based on the neutron beam environment of the CTNR system.The results showed that the deviation was primarily caused by geometric distortion at low collimation ratios and radiation noise induced by highenergy neutrons.Additionally,the theoretical model was modified by considering the imaging position and radiation noise factors.The modified theoretical model was in good agreement with the experimental results,and the maximum deviation was reduced to 4.22%.This can be useful for the high-precision design of CTNR systems.展开更多
This paper mainly studies the influence maximization problem of threshold models in hypergraphs,which aims to identify the most influential nodes in hypergraphs.Firstly,we introduce a novel information diffusion rule ...This paper mainly studies the influence maximization problem of threshold models in hypergraphs,which aims to identify the most influential nodes in hypergraphs.Firstly,we introduce a novel information diffusion rule in hypergraphs based on Threshold Models and conduct the stability analysis.Then we extend the CI-TM algorithm,originally designed for complex networks,to hypergraphs,denoted as the H-CI-TM algorithm.Secondly,we use an iterative approach to get the globally optimal solutions.The analysis reveals that our algorithm ultimately identifies the most influential set of nodes.Based on the numerical simulations,HCI-TM algorithm outperforms several competing algorithms in both synthetic and real-world hypergraphs.Essentially,when provided with the same number of initial seeds,our algorithm can achieve a larger activation size.Our method not only accurately assesses the influence of individual nodes but also identifies a set of nodes with greater impact.Furthermore,our results demonstrate good scalability when handling intricate relationships and large-scale hypergraphs.The outcomes of our research provide substantial support for the applications of the threshold models across diverse fields,including social network analysis and marketing strategies.展开更多
Deuteron-driven spallation targets have garnered attention recently because they can provide high-energy neutrons to transmute long-lifetime fission products.In this study,the Geant4 toolkit was used to simulate the i...Deuteron-driven spallation targets have garnered attention recently because they can provide high-energy neutrons to transmute long-lifetime fission products.In this study,the Geant4 toolkit was used to simulate the inter-action between a deuteron beam at 500 MeV and a com-posite target composed of alternating lead-bismuth eutectic(LBE)and water.The water was used because it may be employed as a target coolant.The energy spectrum,neu-tron yield,average energy,and total energy of the emitted neutrons were calculated for different thicknesses and thickness ratios between the LBE and water.For a constant target thickness,the neutron yield increases with an increasing thickness ratio of LBE to H 2 O,while the aver-age energy of the emitted neutrons decreases with an increasing in the aforementioned thickness ratio.These two aspects support the use of a pure target,either LBE or water.However,with an increasing LBE-to-H 2 O thickness ratio,the total energy of the emitted neutrons increases and then decreases.This result supports the addition of water into the LBE target.The angular distributions of the emitted neutrons show that the rear of the target is suit-able for loading nuclear waste containing minor actinides and long-lifetime fission products.展开更多
A substantial number of the coal mines in China are in the geological condition of thick alluvium layer. Under these circumstances, it does not make sense to predict ground surface subsidence and other deformations by...A substantial number of the coal mines in China are in the geological condition of thick alluvium layer. Under these circumstances, it does not make sense to predict ground surface subsidence and other deformations by using conventional prediction models. This paper presents a novel ground surface subsidence prediction model for sub-critical mining in the geological condition of thick alluvium layer. The geological composition and mechanical properties of thick alluvium is regarded as a random medium, as are the uniformly distributed loads on rock mass; however, the overburden of the rock mass in the bending zone is looked upon as a hard stratum controlling the ground surface subsidence. The different subsidence and displacement mechanisms for the rock mass and the thick alluvium layer are respectively considered and described in this model, which indicates satisfactory performances in a practical prediction case.展开更多
Recent progress in nuclear data measurement for ADS at Institute of Modern Physics is reviewed briefly.Based on the cooler storage ring of the Heavy Ion Research Facility in Lanzhou, nuclear data terminal was establis...Recent progress in nuclear data measurement for ADS at Institute of Modern Physics is reviewed briefly.Based on the cooler storage ring of the Heavy Ion Research Facility in Lanzhou, nuclear data terminal was established.The nuclear data measurement facility for the ADS spallation target has been constructed, which provides a very important platform for the experimental measurements of spallation reactions. A number of experiments have been conducted in the nuclear data terminal. A Neutron Time-of-Flight(NTOF)spectrometer was developed for the study of neutron production from spallation reactions related to the ADS project.The experiments of 400 MeV/u ^(16)O bombarded on a tungsten target were presented using a NTOF spectrometer.Neutron yields for 250 MeV protons incident on a thick grain-made tungsten target and a thick solid lead target have been measured using the water-bath neutron activation method. Spallation residual productions were studied by bombarding W and Pb targets with a 250 MeV proton beam using the neutron activation method. Benchmarking of evaluated nuclear data libraries was performed for D-T neutrons on ADS relevant materials by using the benchmark experimental facility at the China Institute of Atomic Energy.展开更多
An accelerator-driven subcritical system(ADS)is driven by an external spallation neutron source, which is generated from a heavy metal spallation target to maintain stable operation of the subcritical core, where the ...An accelerator-driven subcritical system(ADS)is driven by an external spallation neutron source, which is generated from a heavy metal spallation target to maintain stable operation of the subcritical core, where the energy of the spallation neutrons can reach several hundred megaelectron volts. However, the upper neutron energy limit of nuclear cross-section databases, which are widely used in critical reactor physics calculations, is generally 20 MeV.This is not suitable for simulating the transport of highenergy spallation neutrons in the ADS. We combine the Japanese JENDL-4.0/HE high-energy evaluation database and the ADS-HE and ADS 2.0 libraries from the International Atomic Energy Agency and process all the data files for nuclides with energies greater than 20 MeV. We use the continuous pointwise cross-section program NJOY2016 to generate the ACE-formatted cross-section data library IMPC-ADS at multiple temperature points. Using the IMPC-ADS library, we calculate 10 critical benchmarks of the International Criticality Safety Benchmark Evaluation Project manual, the 14-MeV fixed-source problem of the Godiva sphere, and the neutron flux of the ADS subcritical core by MCNPX. To verify the correctness of the IMPCADS, the results were compared with those calculated using the ENDF/B-VII.0 library. The results showed thatthe IMPC-ADS is reliable in effective multiplication factor and neutron flux calculations, and it can be applied to physical analysis of the ADS subcritical reactor core.展开更多
In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Instit...In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Institute of Nuclear Energy Safety Technology,was selected as the reference reactor for ADS development,as well as for the technology development of the Generation IV lead-cooled fast reactor.The conceptual design of CLEAR-I with 10 MW thermal power has been completed.KYLIN series lead-bismuth eutectic experimental loops have been constructed to investigate the technologies of the coolant,key components,structural materials,fuel assembly,operation,and control.In order to validate and test the key components and integrated operating technology of the lead-based reactor,the lead alloy-cooled non-nuclear reactor CLEAR-S,the lead-based zero-power nuclear reactor CLEAR-0,and the lead-based virtual reactor CLEAR-V are under realization.展开更多
The analysis of the fuel depletion behavior is critical for maintaining the safety of accelerator-driven subcritical systems(ADSs). The code COUPLE2.0 coupling 3-D neutron transport and point burnup calculation was de...The analysis of the fuel depletion behavior is critical for maintaining the safety of accelerator-driven subcritical systems(ADSs). The code COUPLE2.0 coupling 3-D neutron transport and point burnup calculation was developed by Tsinghua University. A Monte Carlo method is used for the neutron transport analysis, and the burnup calculation is based on a deterministic method. The code can be used for the analysis of targets coupled with a reactor in ADSs. In response to additional ADS analysis requirements at the Institute of Modern Physics at the Chinese Academy of Sciences, the COUPLE3.0 version was developed to include the new functions of(1) a module for the calculation of proton irradiation for the analysis of cumulative behavior using the residual radionuclide operating history,(2) a fixed-flux radiation module for hazard assessment and analysis of the burnable poison, and(3) a module for multi-kernel parallel calculation, which improves the radionuclide replacement for the burnup analysis to balance the precision level and computational efficiency of the program. This paper introduces thevalidation of the COUPLE3.0 code using a fast reactor benchmark and ADS benchmark calculations. Moreover,the proton irradiation module was verified by a comparison with the analytic method of calculating the210 Po accumulation results. The results demonstrate that COUPLE3.0 is suitable for the analysis of neutron transport and the burnup of nuclides for ADSs.展开更多
Lead and lead-alloys are proposed in future advanced nuclear system as coolant and spallation target.To test the natural circulation and gas-lift and obtain thermal-hydraulics data for computational fluid dynamics(CFD...Lead and lead-alloys are proposed in future advanced nuclear system as coolant and spallation target.To test the natural circulation and gas-lift and obtain thermal-hydraulics data for computational fluid dynamics(CFD) and system code validation, a lead–bismuth eutectic rectangular loop, the KYLIN-Ⅱ Thermal Hydraulic natural circulation test loop, has been designed and constructed by the FDS team. In this paper, theoretical analysis on natural circulation thermal-hydraulic performance is described and the steady-state natural circulation experiment is performed. The results indicated that the natural circulation capability depends on the loop resistance and the temperature and center height differences between the hot and cold legs. The theoretical analysis results agree well with,while the CFD deviate from, the experimental results.展开更多
文摘This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early application of fusion technology. The necessity and feasibility to develop that system in China are illustrated on the basis of prediction of the demand of energy source in the first half of the 21th century, the status of current fission energy supply and the progress in fusion technology in the world. The characteristics of fusion neutron driver and the potential for transmutation of long-lived nuclear wastes and breeding of fissile nuclear fuel in a blanket are analyzed. A scenario of development steps is proposed.
文摘This work represents the extraction of oil with high free fatty acid content from spent bleaching earth using sub-critical water technology as a greener production pathway. The extraction efficiencies under different conditions were investigated. The studied parameters include temperatures in the range of 180 to 270°C, the feed to solventfeed-to-solvent (in this case water) ratio (1:1, 1:2, 1:3, 1:4 and 1:5) and extraction times in the range of 5-60 minutes. The results showed that the optimum temperature, feed to solventfeed-to-solvent ratio, and extraction time were 270°C, 1:3, and 20 minutes, respectively. In another experiment, the extracted free fatty acids were converted into mono-, di-, and triglycerides through esterification with glycerol to increase the value added of the extracted products. The kinetics of the extraction process was found to be corresponding to an irreversible consecutive unimolecular-type first order reaction, consisting of the extraction step followed by the decomposition reaction step. Both reaction rates of extraction and decomposition were estimated using the reaction rate equations utilizing the nonlinear regression method. The apparent activation energy was calculated to be 46.1 kJ·mol-1. This result indicates a diffusion controlled reaction. For more exploration and deep understanding of the extraction mechanism, other thermodynamic parameters were also calculated and analyzed including,ΔH#, ΔS#, and ΔG# of the extraction step.
基金Project supported by Doctoral Study Courses Foundation and Post-Doctoral Scientific Foundation .
文摘The strata movement induced by sub-critical extraction is a problem not receiving due attention because of its relatively small magnitude of deformation. However, with the increase of mining depth, sub-critical extraction has become a general phenomenon. This calls for an in-depth investigation into the characteristics of ground movements observed under different extents of sub-critical extraction, so as to determine the appropriate mining technique for use. Following a discussion of the factors influencing the extent of super-critical extraction, the super-critical extraction extent evaluation criteria was presented, the characteristics and laws of the strata and ground movements caused by such an extraction condition were systematically analyzed, and the mechanism of surface subsidence induced by sub-critical extraction was revealed. The result of study may serve as a basis for the development of the strata and ground movement prediction model and the mining techniques appropriate for use at depth beneath surface structures and buildings.
基金Supported by the National Natural Science Foundation of China(21566013,51562016)Youth Science Foundation of Jiangxi Provincial Department of Education,China(GJJ170970)the Natural Science Foundation of Jiangxi Province(20171BAB206015)
文摘Membrane fouling is often considered as a hindrance for the application of microfiltration/ultrafiltration(MF/UF) for drinking water production. A novel process of photocatalytic membrane reactor/dynamic membrane(PMR/DM), operating in a continuous mode under sub-critical flux, was proposed for the mitigation of membrane fouling caused by humic acids(HAs) in water. The mechanism of membrane fouling alleviation with synergistic photocatalytic oxidation and dynamic layer isolating effect was comprehensively investigated from the characterization of foulant evolution responsible for the reversible and irreversible fouling. The results showed that the PMR/DM utilized photocatalytic oxidation to enhance the porosity and hydrophilicity of the fouling layer by converting the high molecular weight(MW) and hydrophobic HA molecules with carboxylic functional groups and aromatic structures into low-MW hydrophilic or transphilic fractions, including tryptophan-like or fulvic-like substances. The fouling layer formed in the PMR/DM by combination of photocatalytic oxidation and DM running at a sub-critical flux of 100 L·h^-1·m^-2, was more hydrophilic and more porous, resulting in the lowest trans-membrane pressure(TMP) growth rates, as compared to the processes of ceramic membrane(CM), DM and PMR/CM.Meanwhile, the dynamic layer prevented the foulants, particularly the high-MW hydrophobic fractions,from contacting the primary membrane, which enabled the membrane permeability to be restored easily.
基金Project(50374073) supported by the National Natural Science Foundation of ChinaProject(1343-77239) supported by the Graduate Education Innovation Project of Central South University,China
文摘In-plane shear crack sub-critical propagation of rock at high temperature was studied by finite element method and shear-box(i.e.compression-shear) test with newly designed electrically conductive adhesive method.Numerical and experimental results show that the normalized shear(Mode Ⅱ) stress intensity factors,K ⅡT/KT0 is decreased as the temperature increases because high temperature can improve stress distribution at crack tip and reduce the Mode Ⅱ stress intensity factor.Microscopic features of fractured surface are of little pits and secondary micro-cracks in the vicinity(1.5-4.0 mm) of the crack tip.The chevron-shape secondary cracks gradually merge in the length of about 4-5 mm and disappear along the direction of crack propagation.Stable shear crack propagation time is increased with the increasing temperature while the stable shear crack propagation rate is decreased with the increasing temperature,since high temperature can increase the shear(Mode Ⅱ) fracture toughness and prevent the crack growth.It is necessary to ensure the ligament of specimen long enough to measure the maximum unstable crack propagation rate of rock.
基金Project(50374073) supported by the National Natural Science Foundation of ChinaProject(1343-77239) supported by the Graduate Education Innovation Project of Central South University,China
文摘Shear-box(i.e.compression-shear) test and newly designed electrically conductive adhesive method were used to measure shear crack sub-critical propagation time and rate of sandstone specimen.Different cubic specimens with and without holes were tested to study the effect of holes on the shear crack sub-critical propagation.Numerical and experimental results show that three independent variables of hole,the interval distance S,the distance between the center of hole and the crack tip L,and hole radius R,have different contribution to the ratio of stress intensity factor of the specimen with holes to that of the specimen without hole,KⅡ/KⅡ0.Increasing S and decreasing L and R will result in the decrease of KⅡ/KⅡ0 and help crack arrest.The weight relation of the independent variables for KⅡ/KⅡ0 is S>L>R.The specimen DH3 with the largest value of S and the smallest values of L and R has the longest sub-critical crack propagation time and the smallest sub-critical crack propagation rate.Adding two suitable holes symmetrically to the original crack plane in rock specimen is considered to be a potential method for crack arrest of rock.
文摘In reactor physics tests, it is important to monitor sub-criticality continuously during criticality approach. Reactivity measurements by the inverse kinetics method are widely used during the operation of a nuclear reactor. This technique is successfully applied at sufficiently high power level or to a core without an external neutron source where the neutron source term in point reactor kinetics equations may be neglected. For operation at low power levels or in the sub-critical domain, the increase in the fluctuation of the neutron signal may cause difficulties in the evaluation of reactivity and the effect of direct emission from the external neutron source may not be neglected. Therefore, contribution of the neutron source must be taken into account and this implies knowledge of a quantity proportional to the source strength, which calls the source term and then it should be determined. The research work has been conducted to measure reactivity with source term using a dedicated reactivity measurement system by the Least Square Inverse Kinetics Method (LSIKM). Application to a simulator of HANARO research reactor, Korea Atomic Energy Research Institute (KAERI), with known source strength and reactivity worth has showed consistent and satisfactory agreement.
基金the Research Fund for the Doctoral Program of Higher Education for new teachers of China(20091404120002)the Shanxi Province Science Foundation for Youths of China(2011021008-1)the Soft Science Program of Shanxi Province(2011041015-01)
文摘Hydrothermal liquefaction of wheat straw in sub-critical water with ionic liquid was investigated in an autoclave. The product distribution at different temperatures and pressures was studied. The liquid oil and the residuals were tested by 1H NMR, FTIR and SEM techniques. The results indicated that under the same conditions, the oil yield from liquefaction of wheat straw in water/ethanol was higher than that in sub-critical water. The result also showed that under the investigated conditions, adding 1-butyl-3-methylimidazolium chloride([Bmim]Cl) could increase the total conversion and gas yield, while at the same time the yield of n-hexane insoluble fraction and the tetrahydrofuran soluble fraction was reduced. Moreover, the results also showed that upon adding [Bmim]Cl the contents of the aliphatic hydrogen and phenols in liquid oil also increased along with improved oil quality.
基金This work was supported by the NSFCShanxi coal based low carbon joint fund(U1810209)the Natural Science Foundation of Shanxi Province(201901D111006).
文摘The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTIR,GC-MS,1HNMR,and 13CNMR techniques.The test results showed that the synergistic effect of co-liquefaction was obvious when the ratio of cotton seed and flospopuli was 1:1 without additives.The additives,such as 12-phosphotungstic acid(PW12),HZSM-5,PW12/HZSM-5 and modified medical stone(MS),PW12/MS,Ni/MS,Co/MS,Mo/MS and Co-Mo/MS,could increase the bio-oil yield;and the modified MS resulted in higher liquefied oil yield than that achieved by MS.Furthermore,additives such as Ni/MS,Mo/MS,and Co-Mo/MS also could increase the yield of aliphatic hydrocarbons in liquefied oil.The addition of Co-Mo/MS could lead to a highest liquefied oil yield of 28.8%,while the additive of PW12/HZSM-5 could result in a highest total conversion of 81.6%.Results also revealed that additives,such as PW12/MS,PW12,PW12/HZSM-5,Ni/MS,Co/MS,Mo/MS,and Co-Mo/MS,could increase the H2 production and decrease the CO2 production in gas products.
文摘Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants traditionally used in Europe and Asia to produce pharmaceutical extracts (such as volatile oil, tannins, flavonoids, anthraquinone, lactone, etc.). Meanwhile, the prospect of sub-critical water extraction in plant extractives is also explored. It will be widely used in the field of medical plants, bringing huge economic benefits, environmental benefits and social benefits.
基金Supported by 2016 Instrument Functional Development Project of Lanzhou Regional Center of Resources and Environmental Science Instrument,CAS(2018gl11)
文摘[Objectives] To study the optimal conditions for extracting procyanidins fromLycium ruthenicum Murr. with sub-critical fluid R134 a( 1,1,1,2-tetrafluoroethane) in 1 L extraction kettle. [Methods]Taking the extraction rate of procyanidins as an indicator,the influence of pressure,temperature,and extraction time on extraction rate of procyanidins fromL. Ruthenicum Murr. was studied by single factor experimental methods and orthogonal array design. [Results]The order of factors affecting extraction rate of procyanidins was extraction temperature > extraction pressure > extraction time. The optimum extraction conditions were as follows: the extraction rate of procyanidins fromL. ruthenicum Murr. was the highest with extraction pressure of 1. 2 MPa,extraction temperature of 50℃ and extraction time of 90 min. The content of procyanidins in L. ruthenicum Murr. from different producing areas was determined by vanillin-HCl method under the optimal conditions. [Conclusions] The method has the advantages of easy operation,good selectivity,low extraction temperature and high extraction efficiency,which is suitable for extraction of procyanidins in L. ruthenicum Murr.
基金supported by the Nuclear Energy Development Project of China (No.[2019]1342)the Presidential Foundation of HFIPS (No.YZJJ2022QN40)。
文摘Owing to the immobility of traditional reactors and spallation neutron sources,the demand for compact thermal neutron radiography(CTNR)based on accelerator neutron sources has rapidly increased in industrial applications.Recently,thermal neutron radiography experiments based on a D-T neutron generator performed by Hefei Institutes of Physical Science indicated a significant resolution deviation between the experimental results and the values calculated using the traditional resolution model.The experimental result was up to 23%lower than the calculated result,which hinders the achievement of the design goal of a compact neutron radiography system.A GEANT4 Monte Carlo code was developed to simulate the CTNR process,aiming to identify the key factors leading to resolution deviation.The effects of a low collimation ratio and high-energy neutrons were analyzed based on the neutron beam environment of the CTNR system.The results showed that the deviation was primarily caused by geometric distortion at low collimation ratios and radiation noise induced by highenergy neutrons.Additionally,the theoretical model was modified by considering the imaging position and radiation noise factors.The modified theoretical model was in good agreement with the experimental results,and the maximum deviation was reduced to 4.22%.This can be useful for the high-precision design of CTNR systems.
基金Supported by the National Natural Science Foundation of China(Grant No.12371516)the Natural Science Foundation of Liaoning Province(Grant No.2022-MS-152)the Fundamental Research Funds for the Central Universities(Grant No.DUT22LAB305)。
文摘This paper mainly studies the influence maximization problem of threshold models in hypergraphs,which aims to identify the most influential nodes in hypergraphs.Firstly,we introduce a novel information diffusion rule in hypergraphs based on Threshold Models and conduct the stability analysis.Then we extend the CI-TM algorithm,originally designed for complex networks,to hypergraphs,denoted as the H-CI-TM algorithm.Secondly,we use an iterative approach to get the globally optimal solutions.The analysis reveals that our algorithm ultimately identifies the most influential set of nodes.Based on the numerical simulations,HCI-TM algorithm outperforms several competing algorithms in both synthetic and real-world hypergraphs.Essentially,when provided with the same number of initial seeds,our algorithm can achieve a larger activation size.Our method not only accurately assesses the influence of individual nodes but also identifies a set of nodes with greater impact.Furthermore,our results demonstrate good scalability when handling intricate relationships and large-scale hypergraphs.The outcomes of our research provide substantial support for the applications of the threshold models across diverse fields,including social network analysis and marketing strategies.
基金supported by the National Natural Science Foundation of China(No.11875328).
文摘Deuteron-driven spallation targets have garnered attention recently because they can provide high-energy neutrons to transmute long-lifetime fission products.In this study,the Geant4 toolkit was used to simulate the inter-action between a deuteron beam at 500 MeV and a com-posite target composed of alternating lead-bismuth eutectic(LBE)and water.The water was used because it may be employed as a target coolant.The energy spectrum,neu-tron yield,average energy,and total energy of the emitted neutrons were calculated for different thicknesses and thickness ratios between the LBE and water.For a constant target thickness,the neutron yield increases with an increasing thickness ratio of LBE to H 2 O,while the aver-age energy of the emitted neutrons decreases with an increasing in the aforementioned thickness ratio.These two aspects support the use of a pure target,either LBE or water.However,with an increasing LBE-to-H 2 O thickness ratio,the total energy of the emitted neutrons increases and then decreases.This result supports the addition of water into the LBE target.The angular distributions of the emitted neutrons show that the rear of the target is suit-able for loading nuclear waste containing minor actinides and long-lifetime fission products.
文摘A substantial number of the coal mines in China are in the geological condition of thick alluvium layer. Under these circumstances, it does not make sense to predict ground surface subsidence and other deformations by using conventional prediction models. This paper presents a novel ground surface subsidence prediction model for sub-critical mining in the geological condition of thick alluvium layer. The geological composition and mechanical properties of thick alluvium is regarded as a random medium, as are the uniformly distributed loads on rock mass; however, the overburden of the rock mass in the bending zone is looked upon as a hard stratum controlling the ground surface subsidence. The different subsidence and displacement mechanisms for the rock mass and the thick alluvium layer are respectively considered and described in this model, which indicates satisfactory performances in a practical prediction case.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences ADS Project(No.XDA03030200)the National Natural Science Foundation of China(No.91426301)
文摘Recent progress in nuclear data measurement for ADS at Institute of Modern Physics is reviewed briefly.Based on the cooler storage ring of the Heavy Ion Research Facility in Lanzhou, nuclear data terminal was established.The nuclear data measurement facility for the ADS spallation target has been constructed, which provides a very important platform for the experimental measurements of spallation reactions. A number of experiments have been conducted in the nuclear data terminal. A Neutron Time-of-Flight(NTOF)spectrometer was developed for the study of neutron production from spallation reactions related to the ADS project.The experiments of 400 MeV/u ^(16)O bombarded on a tungsten target were presented using a NTOF spectrometer.Neutron yields for 250 MeV protons incident on a thick grain-made tungsten target and a thick solid lead target have been measured using the water-bath neutron activation method. Spallation residual productions were studied by bombarding W and Pb targets with a 250 MeV proton beam using the neutron activation method. Benchmarking of evaluated nuclear data libraries was performed for D-T neutrons on ADS relevant materials by using the benchmark experimental facility at the China Institute of Atomic Energy.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA03030102)
文摘An accelerator-driven subcritical system(ADS)is driven by an external spallation neutron source, which is generated from a heavy metal spallation target to maintain stable operation of the subcritical core, where the energy of the spallation neutrons can reach several hundred megaelectron volts. However, the upper neutron energy limit of nuclear cross-section databases, which are widely used in critical reactor physics calculations, is generally 20 MeV.This is not suitable for simulating the transport of highenergy spallation neutrons in the ADS. We combine the Japanese JENDL-4.0/HE high-energy evaluation database and the ADS-HE and ADS 2.0 libraries from the International Atomic Energy Agency and process all the data files for nuclides with energies greater than 20 MeV. We use the continuous pointwise cross-section program NJOY2016 to generate the ACE-formatted cross-section data library IMPC-ADS at multiple temperature points. Using the IMPC-ADS library, we calculate 10 critical benchmarks of the International Criticality Safety Benchmark Evaluation Project manual, the 14-MeV fixed-source problem of the Godiva sphere, and the neutron flux of the ADS subcritical core by MCNPX. To verify the correctness of the IMPCADS, the results were compared with those calculated using the ENDF/B-VII.0 library. The results showed thatthe IMPC-ADS is reliable in effective multiplication factor and neutron flux calculations, and it can be applied to physical analysis of the ADS subcritical reactor core.
文摘In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Institute of Nuclear Energy Safety Technology,was selected as the reference reactor for ADS development,as well as for the technology development of the Generation IV lead-cooled fast reactor.The conceptual design of CLEAR-I with 10 MW thermal power has been completed.KYLIN series lead-bismuth eutectic experimental loops have been constructed to investigate the technologies of the coolant,key components,structural materials,fuel assembly,operation,and control.In order to validate and test the key components and integrated operating technology of the lead-based reactor,the lead alloy-cooled non-nuclear reactor CLEAR-S,the lead-based zero-power nuclear reactor CLEAR-0,and the lead-based virtual reactor CLEAR-V are under realization.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA03030102)
文摘The analysis of the fuel depletion behavior is critical for maintaining the safety of accelerator-driven subcritical systems(ADSs). The code COUPLE2.0 coupling 3-D neutron transport and point burnup calculation was developed by Tsinghua University. A Monte Carlo method is used for the neutron transport analysis, and the burnup calculation is based on a deterministic method. The code can be used for the analysis of targets coupled with a reactor in ADSs. In response to additional ADS analysis requirements at the Institute of Modern Physics at the Chinese Academy of Sciences, the COUPLE3.0 version was developed to include the new functions of(1) a module for the calculation of proton irradiation for the analysis of cumulative behavior using the residual radionuclide operating history,(2) a fixed-flux radiation module for hazard assessment and analysis of the burnable poison, and(3) a module for multi-kernel parallel calculation, which improves the radionuclide replacement for the burnup analysis to balance the precision level and computational efficiency of the program. This paper introduces thevalidation of the COUPLE3.0 code using a fast reactor benchmark and ADS benchmark calculations. Moreover,the proton irradiation module was verified by a comparison with the analytic method of calculating the210 Po accumulation results. The results demonstrate that COUPLE3.0 is suitable for the analysis of neutron transport and the burnup of nuclides for ADSs.
基金supported by the National Natural Science Foundations of China(Nos.51401205 and 51301163)the Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA03040000)
文摘Lead and lead-alloys are proposed in future advanced nuclear system as coolant and spallation target.To test the natural circulation and gas-lift and obtain thermal-hydraulics data for computational fluid dynamics(CFD) and system code validation, a lead–bismuth eutectic rectangular loop, the KYLIN-Ⅱ Thermal Hydraulic natural circulation test loop, has been designed and constructed by the FDS team. In this paper, theoretical analysis on natural circulation thermal-hydraulic performance is described and the steady-state natural circulation experiment is performed. The results indicated that the natural circulation capability depends on the loop resistance and the temperature and center height differences between the hot and cold legs. The theoretical analysis results agree well with,while the CFD deviate from, the experimental results.
