To enhance the microwave absorption performance of silicon carbide nanowires（SiCNWs）, SiO_2 nanoshells with a thickness of approximately 2 nm and Fe_3O_4 nanoparticles were grown on the surface of SiCNWs to form SiC...To enhance the microwave absorption performance of silicon carbide nanowires（SiCNWs）, SiO_2 nanoshells with a thickness of approximately 2 nm and Fe_3O_4 nanoparticles were grown on the surface of SiCNWs to form SiC@SiO_2@Fe_3O_4 hybrids. The microwave absorption performance of the SiC@SiO_2@Fe_3O_4 hybrids with different thicknesses was investigated in the frequency range from 2 to 18 GHz using a free-space antenna-based system. The results indicate that SiC@SiO_2@Fe_3O_4 hybrids exhibit improved microwave absorption. In particular, in the case of an SiC@SiO_2 to iron（III） acetylacetonate mass ratio of 1：3, the microwave absorption with an absorber of 2-mm thickness exhibited a minimum reflection loss of-39.58 d B at 12.24 GHz. With respect to the enhanced microwave absorption mechanism, the Fe_3O_4 nanoparticles coated on SiC@SiO_2 nanowires are proposed to balance the permeability and permittivity of the materials, contributing to the microwave attenuation.展开更多
In order to solve the bad low frequency sound absorption of the Micro-Perforated panel （MPP） absorber, mechanical impedance was introduced in the back of the MPP absorber to form a composite structure. According to ...In order to solve the bad low frequency sound absorption of the Micro-Perforated panel （MPP） absorber, mechanical impedance was introduced in the back of the MPP absorber to form a composite structure. According to the same particle vibration velocity on both sides of a plate, the mechanical impedance plate transfer matrix could be obtained. The units of the mechanical impedance, cavity and MPP were connected in series with the use of the transfer matrix method, thus creating the composite structure＇s theoretical calculation model. The qual- ity factor affecting absorption bandwidth was analyzed. Bandwidth is inversely proportional to the mechanical impedance plate mass. During the experiments, when at close to 400 Hz, the composite structure reached an absorption peak with a coefficient of above 0.8. Experimen- tal results concurred with theoretical calculations. Mechanical resonance is added based on the traditional MPP resonance sound absorption mechanism. Through this, the performance of low frequency sound absorption can be improved without increasing the thickness of the structure. The frequency band can be broadened by reducing the mechanical impedance plate mass and controlling its boundary-damping coefficient.展开更多
基金financially supported by the National Science Fund for Excellent Young Scholars of China (No.51522402)the National Natural Science Foundation of China (Nos. 51572019 and U1460201)the Fundamental Research Funds for the Central Universities (No. FRF-TP-15-006C1)
文摘To enhance the microwave absorption performance of silicon carbide nanowires（SiCNWs）, SiO_2 nanoshells with a thickness of approximately 2 nm and Fe_3O_4 nanoparticles were grown on the surface of SiCNWs to form SiC@SiO_2@Fe_3O_4 hybrids. The microwave absorption performance of the SiC@SiO_2@Fe_3O_4 hybrids with different thicknesses was investigated in the frequency range from 2 to 18 GHz using a free-space antenna-based system. The results indicate that SiC@SiO_2@Fe_3O_4 hybrids exhibit improved microwave absorption. In particular, in the case of an SiC@SiO_2 to iron（III） acetylacetonate mass ratio of 1：3, the microwave absorption with an absorber of 2-mm thickness exhibited a minimum reflection loss of-39.58 d B at 12.24 GHz. With respect to the enhanced microwave absorption mechanism, the Fe_3O_4 nanoparticles coated on SiC@SiO_2 nanowires are proposed to balance the permeability and permittivity of the materials, contributing to the microwave attenuation.
基金supported by the Scientific Research Foundation for Senior Professional of Jiangsu University(11JDG096)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions((2011)6)
文摘In order to solve the bad low frequency sound absorption of the Micro-Perforated panel （MPP） absorber, mechanical impedance was introduced in the back of the MPP absorber to form a composite structure. According to the same particle vibration velocity on both sides of a plate, the mechanical impedance plate transfer matrix could be obtained. The units of the mechanical impedance, cavity and MPP were connected in series with the use of the transfer matrix method, thus creating the composite structure＇s theoretical calculation model. The qual- ity factor affecting absorption bandwidth was analyzed. Bandwidth is inversely proportional to the mechanical impedance plate mass. During the experiments, when at close to 400 Hz, the composite structure reached an absorption peak with a coefficient of above 0.8. Experimen- tal results concurred with theoretical calculations. Mechanical resonance is added based on the traditional MPP resonance sound absorption mechanism. Through this, the performance of low frequency sound absorption can be improved without increasing the thickness of the structure. The frequency band can be broadened by reducing the mechanical impedance plate mass and controlling its boundary-damping coefficient.
