Based on the TRMM dataset, this paper compares the applicability of the improved MCE(minimum circumscribed ellipse), MBR(minimum bounding rectangle), and DIA(direct indexing area) methods for rain cell fitting. These ...Based on the TRMM dataset, this paper compares the applicability of the improved MCE(minimum circumscribed ellipse), MBR(minimum bounding rectangle), and DIA(direct indexing area) methods for rain cell fitting. These three methods can reflect the geometric characteristics of clouds and apply geometric parameters to estimate the real dimensions of rain cells. The MCE method shows a major advantage in identifying the circumference of rain cells. The circumference of rain cells identified by MCE in most samples is smaller than that identified by DIA and MBR, and more similar to the observed rain cells. The area of rain cells identified by MBR is relatively robust. For rain cells composed of many pixels(N> 20), the overall performance is better than that of MCE, but the contribution of MBR to the best identification results,which have the shortest circumference and the smallest area, is less than that of MCE. The DIA method is best suited to small rain cells with a circumference of less than 100 km and an area of less than 120 km^(2), but the overall performance is mediocre. The MCE method tends to achieve the highest success at any angle, whereas there are fewer “best identification”results from DIA or MBR and more of the worst ones in the along-track direction and cross-track direction. Through this comprehensive comparison, we conclude that MCE can obtain the best fitting results with the shortest circumference and the smallest area on behalf of the high filling effect for all sizes of rain cells.展开更多
In this study, we focus into the non-relativistic wave equation described by the Schrodinger equation, specifically considering angular-dependent potentials within the context of a topological defect background genera...In this study, we focus into the non-relativistic wave equation described by the Schrodinger equation, specifically considering angular-dependent potentials within the context of a topological defect background generated by a cosmic string. Our primary goal is to explore quasi-exactly solvable problems by introducing an extended ring-shaped potential. We utilize the Bethe ansatz method to determine the angular solutions, while the radial solutions are obtained using special functions. Our findings demonstrate that the eigenvalue solutions of quantum particles are intricately influenced by the presence of the topological defect of the cosmic string,resulting in significant modifications compared to those in a flat space background. The existence of the topological defect induces alterations in the energy spectra, disrupting degeneracy.Afterwards, we extend our analysis to study the same problem in the presence of a ring-shaped potential against the background of another topological defect geometry known as a point-like global monopole. Following a similar procedure, we obtain the eigenvalue solutions and analyze the results. Remarkably, we observe that the presence of a global monopole leads to a decrease in the energy levels compared to the flat space results. In both cases, we conduct a thorough numerical analysis to validate our findings.展开更多
The dynamical equations of a thin rectangle plate subjected to the friction support boundary and its plane force are established in this paper. The local bifurcation of this system is investigated by using L S method...The dynamical equations of a thin rectangle plate subjected to the friction support boundary and its plane force are established in this paper. The local bifurcation of this system is investigated by using L S method and the singularity theory. The Z 2 bifurcation in non degenerate case is discussed. The local bifurcation diagrams of the unfolding parameters and the bifurcation response characters referred to the physical parameters of the system are obtained by numerical simulation. The results of the computer simulation are coincident with the theoretical analysis and experimental results.展开更多
The effect of rectangle wave pulse current on solidification structure of ZA27 alloy was studied. The restdts show that the wave pattern relies on the frequency range of harmonic wave and the energy of pulse current w...The effect of rectangle wave pulse current on solidification structure of ZA27 alloy was studied. The restdts show that the wave pattern relies on the frequency range of harmonic wave and the energy of pulse current within the frequency range of pulse current. Imposed pulse current could induce the solidification system to oscillate. The frequency range and the relevant energy distribution of pulse current exert an influence on the amount of atoms involved for forming critical nucleus, the surface states of dusters in melt, the oscillating state of melt on the surface of dusters, the active energy of atom diffusion , the frequnce response of the resonance of bulk melt and the absorbability of the solidification system to the external work. Rectangle wave pulse current involves rich harmonic waves ; the amplitudes of high order of harmonic waves are higher and reduce slowly, so it has a better effect on inoculation and modification.展开更多
As a coprocessor, field-programmable gate array （FPGA） is the hardware computing processor accelerating the computing capacity of coraputers. To efficiently manage the hardware free resources for the placing of task...As a coprocessor, field-programmable gate array （FPGA） is the hardware computing processor accelerating the computing capacity of coraputers. To efficiently manage the hardware free resources for the placing of tasks on FPGA and take full advantage of the partially reconfigurable units, good utilization of chip resources is an important and necessary work. In this paper, a new method is proposed to find the complete set of maximal free resource rectangles based on the cross point of edge lines of running tasks on FPGA area, and the prove process is provided to make sure the correctness of this method.展开更多
In many engineering applications, it is necessary to calculate the min-area encasing box of a circumscription. In this paper, an algorithm for generating the min-area rectangle encasing box, based on revolving angle, ...In many engineering applications, it is necessary to calculate the min-area encasing box of a circumscription. In this paper, an algorithm for generating the min-area rectangle encasing box, based on revolving angle, is investigated and hence put forward. The algorithm computes the areas of the outer rectangular bounds of a closed contour in different revolving angles θ by dispersing approach where 0< θ < π/2 because of the axial symmetry. It is very simple, straight forward and highly efficient. The complexity of its computing time reaches O(n·k ). Practical applications suggest its usefulness and efficiency.展开更多
An outer ring of 29320 self-aliging roller bearing was used in an experimental study on the casting of Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) amorphous alloy.Numerical simulations of mold filling and solidification p...An outer ring of 29320 self-aliging roller bearing was used in an experimental study on the casting of Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) amorphous alloy.Numerical simulations of mold filling and solidification processes were carried out to determine the velocity fields and temperature fields of the alloy melt during mold filling process as well as the temperature fields and temperature gradient fields in the course of the solidification.According to the results,a cast with a complete shape can be obtained at 1200℃under the condition that the cooling rate is greater than the critical cooling rate.The ring-shaped part with a thickness of 25 mm,an equivalent diameter of 22 mm,and a mass of 1.32 kg was prepared by gravity casting in a copper mold.X-ray diffraction and differential scanning calorimetry data revealed that the produced cast had the amorphous structure.展开更多
This article shows that in spherical polar coordinates, some noncentral separable potentials have super-symmetry and shape invariance in the r and θ dimensions, we choose Hartmann potential and ring-shaped oscillator...This article shows that in spherical polar coordinates, some noncentral separable potentials have super-symmetry and shape invariance in the r and θ dimensions, we choose Hartmann potential and ring-shaped oscillator astwo important examples, thus in principle the energy eigenvalues and energy eigenfunctions of such the potentials in ther and θ dimensions can be obtained by the method of supersymmetric quantum mechanics. Here we use an alternativemethod to get the required results.展开更多
Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two l...Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two layers are SMPs with different thermal transition temperatures.By designing specific thermomechanical processes,the mismatched deformation between the two layers leads to a morphology change of ring-shaped bilayer structures from a smooth ring to a gear-like buckling shape under cooling and a reversible recovery to the smooth shape under heating.Such a morphology change is ascribed to occurrence and recovery of thermoelastic buckling.This method was validated by finite element simulation.We experimentally investigated the influence of pre-strain on buckling,and it was found that both the buckling occurrence and recovery temperature vary with pre-strain.Furthermore,considering a ring-shaped SMP-SMP bilayer structure,finite element analysis was conducted to study the influence of film thickness and modulus ratio of two layers on buckling behavior.The results showed that the critical buckling wavelength was greatly influenced by film thickness and modulus ratio.W e made a theoretical analysis that accorded well with the numerical results.展开更多
Although human-induced pluripotent stem cell-derived cardiomyocytes(hi PSC-CMs) have been used for disease modeling and drug discovery, clinically relevant three-dimensional(3D) functional myocardial microtissues are ...Although human-induced pluripotent stem cell-derived cardiomyocytes(hi PSC-CMs) have been used for disease modeling and drug discovery, clinically relevant three-dimensional(3D) functional myocardial microtissues are lacking. Here, we developed a novel ring-shaped cardiac microtissue comprised of chamber-specific tissues to achieve a geometrically non-orientable ventricular myocardial band, similar to a M?bius loop. The ring-shaped cardiac tissue was constructed of hi PSC-CMs and human cardiac fibroblasts(h CFs) through a facile cellular self-assembly approach. It exhibited basic anatomical structure,positive cardiac troponin T(c Tn T) immunostaining, regular calcium transients, and cardiac-like mechanical strength. The cardiac rings can be self-assembled and scaled up into various sizes with outstanding stability, suggesting their potential for precise therapy, pathophysiological investigation, and large-scale drug screening.展开更多
We propose a new exactly solvable potential which is Formed by modified Kratzer potential plus a new ring-shaped potential η cot^2 θ/r^2 The solutions of the Dirac equation with equal scalar and vector ring-shaped m...We propose a new exactly solvable potential which is Formed by modified Kratzer potential plus a new ring-shaped potential η cot^2 θ/r^2 The solutions of the Dirac equation with equal scalar and vector ring-shaped modified Kratzer potential are found by using the Nikiforov-Uvarov method. The nonrelativistic limit of the energy spectrum has been discussed.展开更多
Helicopters are widely used in maritime Search and Rescue(SAR) missions. To ensure the success of SAR missions, search areas need to be carefully planned. With the development of computer technology and weather foreca...Helicopters are widely used in maritime Search and Rescue(SAR) missions. To ensure the success of SAR missions, search areas need to be carefully planned. With the development of computer technology and weather forecast technology, the survivors’ drift trajectories can be predicted more precisely, which strongly supports the planning of search areas for the rescue helicopter. However, the methods used to determine the search area based on the predicted drift trajectories are mainly derived from the continuous expansion of the area with the highest Probability of Containment(POC), which may lead to local optimal solutions and a decrease in the Probability of Success(POS), especially when there are several subareas with a high POC. To address this problem, this paper proposes a method based on a Minimum Bounding Rectangle and Kmeans clustering(MBRK). A silhouette coefficient is adopted to analyze the distribution of the survivors’ probable locations, which are divided into multiple clusters with K-means clustering. Then,probability maps are generated based on the minimum bounding rectangle of each cluster. By adding or subtracting one row or column of cells or shifting the planned search area, 12 search methods are used to generate the optimal search area starting from the cell with the highest POC in each probability map. Taking a real case as an example, the simulation experiment results show that the POS values obtained by the MBRK method are higher than those obtained by other methods,which proves that the MBRK method can effectively support the planning of search areas and that K-means clustering improves the POS of search plans.展开更多
In this paper, the principle of multi-point forming (MPF) technique is presented. One of the most serious defects, wrinkling, during the multi-point forming process of a shallow rectangle cup is discussed by means of ...In this paper, the principle of multi-point forming (MPF) technique is presented. One of the most serious defects, wrinkling, during the multi-point forming process of a shallow rectangle cup is discussed by means of numerical simulation on the shallow rectangle cup forming process. The effects of thickness, material of sheet metal and the pressure of the blank holder are investigated. Based on the simulation results, the reasons and control methods of wrinkling are pointed out. Moreover, the experiment on the multi-point die forming of the shallow rectangle cup by the MPF machine is done to validate the efficiency of the numerical simulation, and the result proves that the application of an elastic cushion in the forming can restrain wrinkling efficiently.展开更多
A new ring-shaped non-harmonic oscillator potential is proposed. The precise bound solution of Dirac equation with the potential is gained when the scalar potential is equal to the vector potential. The angular equati...A new ring-shaped non-harmonic oscillator potential is proposed. The precise bound solution of Dirac equation with the potential is gained when the scalar potential is equal to the vector potential. The angular equation and radial equation are obtained through the variable separation method. The results indicate that the normalized angle wave function can be expressed with the generalized associated-Legendre polynomial, and the normalized radial wave function can be expressed with confluent hypergeometric function. And then the precise energy spectrum equations are obtained. The ground state and several low excited states of the system are solved. And those results are compared with the non-relativistic effect energy level in Phys. Lett. A 340 （2005） 94. The positive energy states of system are discussed and the conclusions are made properly.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. U20A2097,42075087, 91837310)the National Key Research and Development Program of China (Grant No. 2021YFC3000902)。
文摘Based on the TRMM dataset, this paper compares the applicability of the improved MCE(minimum circumscribed ellipse), MBR(minimum bounding rectangle), and DIA(direct indexing area) methods for rain cell fitting. These three methods can reflect the geometric characteristics of clouds and apply geometric parameters to estimate the real dimensions of rain cells. The MCE method shows a major advantage in identifying the circumference of rain cells. The circumference of rain cells identified by MCE in most samples is smaller than that identified by DIA and MBR, and more similar to the observed rain cells. The area of rain cells identified by MBR is relatively robust. For rain cells composed of many pixels(N> 20), the overall performance is better than that of MCE, but the contribution of MBR to the best identification results,which have the shortest circumference and the smallest area, is less than that of MCE. The DIA method is best suited to small rain cells with a circumference of less than 100 km and an area of less than 120 km^(2), but the overall performance is mediocre. The MCE method tends to achieve the highest success at any angle, whereas there are fewer “best identification”results from DIA or MBR and more of the worst ones in the along-track direction and cross-track direction. Through this comprehensive comparison, we conclude that MCE can obtain the best fitting results with the shortest circumference and the smallest area on behalf of the high filling effect for all sizes of rain cells.
文摘In this study, we focus into the non-relativistic wave equation described by the Schrodinger equation, specifically considering angular-dependent potentials within the context of a topological defect background generated by a cosmic string. Our primary goal is to explore quasi-exactly solvable problems by introducing an extended ring-shaped potential. We utilize the Bethe ansatz method to determine the angular solutions, while the radial solutions are obtained using special functions. Our findings demonstrate that the eigenvalue solutions of quantum particles are intricately influenced by the presence of the topological defect of the cosmic string,resulting in significant modifications compared to those in a flat space background. The existence of the topological defect induces alterations in the energy spectra, disrupting degeneracy.Afterwards, we extend our analysis to study the same problem in the presence of a ring-shaped potential against the background of another topological defect geometry known as a point-like global monopole. Following a similar procedure, we obtain the eigenvalue solutions and analyze the results. Remarkably, we observe that the presence of a global monopole leads to a decrease in the energy levels compared to the flat space results. In both cases, we conduct a thorough numerical analysis to validate our findings.
文摘The dynamical equations of a thin rectangle plate subjected to the friction support boundary and its plane force are established in this paper. The local bifurcation of this system is investigated by using L S method and the singularity theory. The Z 2 bifurcation in non degenerate case is discussed. The local bifurcation diagrams of the unfolding parameters and the bifurcation response characters referred to the physical parameters of the system are obtained by numerical simulation. The results of the computer simulation are coincident with the theoretical analysis and experimental results.
基金Funded by the Natural Science Foundation of Gansu Province(No.ZS021-A25-027-C)
文摘The effect of rectangle wave pulse current on solidification structure of ZA27 alloy was studied. The restdts show that the wave pattern relies on the frequency range of harmonic wave and the energy of pulse current within the frequency range of pulse current. Imposed pulse current could induce the solidification system to oscillate. The frequency range and the relevant energy distribution of pulse current exert an influence on the amount of atoms involved for forming critical nucleus, the surface states of dusters in melt, the oscillating state of melt on the surface of dusters, the active energy of atom diffusion , the frequnce response of the resonance of bulk melt and the absorbability of the solidification system to the external work. Rectangle wave pulse current involves rich harmonic waves ; the amplitudes of high order of harmonic waves are higher and reduce slowly, so it has a better effect on inoculation and modification.
基金Project supported by the Shanghai Leading Academic Discipline Project(Grant No.J50103)the Natural Science Foundation of Jiangxi Province(Grant No.2010GZS0031)the Science Technology Project of Jiangxi Province(Grant No.2010BGB00604)
文摘As a coprocessor, field-programmable gate array （FPGA） is the hardware computing processor accelerating the computing capacity of coraputers. To efficiently manage the hardware free resources for the placing of tasks on FPGA and take full advantage of the partially reconfigurable units, good utilization of chip resources is an important and necessary work. In this paper, a new method is proposed to find the complete set of maximal free resource rectangles based on the cross point of edge lines of running tasks on FPGA area, and the prove process is provided to make sure the correctness of this method.
文摘In many engineering applications, it is necessary to calculate the min-area encasing box of a circumscription. In this paper, an algorithm for generating the min-area rectangle encasing box, based on revolving angle, is investigated and hence put forward. The algorithm computes the areas of the outer rectangular bounds of a closed contour in different revolving angles θ by dispersing approach where 0< θ < π/2 because of the axial symmetry. It is very simple, straight forward and highly efficient. The complexity of its computing time reaches O(n·k ). Practical applications suggest its usefulness and efficiency.
基金the National Natural Science Foundation of China(Nos.52071278,51827801)the National Key Research and Development Program of China(No.2018YFA0703603)the Hebei Normal University of Science&Technology,China(No.2021YB012).
文摘An outer ring of 29320 self-aliging roller bearing was used in an experimental study on the casting of Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) amorphous alloy.Numerical simulations of mold filling and solidification processes were carried out to determine the velocity fields and temperature fields of the alloy melt during mold filling process as well as the temperature fields and temperature gradient fields in the course of the solidification.According to the results,a cast with a complete shape can be obtained at 1200℃under the condition that the cooling rate is greater than the critical cooling rate.The ring-shaped part with a thickness of 25 mm,an equivalent diameter of 22 mm,and a mass of 1.32 kg was prepared by gravity casting in a copper mold.X-ray diffraction and differential scanning calorimetry data revealed that the produced cast had the amorphous structure.
文摘This article shows that in spherical polar coordinates, some noncentral separable potentials have super-symmetry and shape invariance in the r and θ dimensions, we choose Hartmann potential and ring-shaped oscillator astwo important examples, thus in principle the energy eigenvalues and energy eigenfunctions of such the potentials in ther and θ dimensions can be obtained by the method of supersymmetric quantum mechanics. Here we use an alternativemethod to get the required results.
基金This work was supported by the National Natural Science Foundations of China(Grant 11272044)the Fundamental Research Funds for the Central Universities(Grant 2018JBM305).
文摘Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two layers are SMPs with different thermal transition temperatures.By designing specific thermomechanical processes,the mismatched deformation between the two layers leads to a morphology change of ring-shaped bilayer structures from a smooth ring to a gear-like buckling shape under cooling and a reversible recovery to the smooth shape under heating.Such a morphology change is ascribed to occurrence and recovery of thermoelastic buckling.This method was validated by finite element simulation.We experimentally investigated the influence of pre-strain on buckling,and it was found that both the buckling occurrence and recovery temperature vary with pre-strain.Furthermore,considering a ring-shaped SMP-SMP bilayer structure,finite element analysis was conducted to study the influence of film thickness and modulus ratio of two layers on buckling behavior.The results showed that the critical buckling wavelength was greatly influenced by film thickness and modulus ratio.W e made a theoretical analysis that accorded well with the numerical results.
基金supported by the Scientific and Technology Platform and Talents Project of Changsha (No.kh1801129) (to HW)Hunan Cancer Hospital Climb Plan (No.YF2020007) (to HW)+1 种基金the Huadong Medicine Joint Funds of the Zhejiang Provincial Natural Science Foundation of China (No.LHDMZ22H020001) (To XY)the Science and Technology Program of Jinhua Science and Technology Bureau (No.2021-3-001) (To XY)。
文摘Although human-induced pluripotent stem cell-derived cardiomyocytes(hi PSC-CMs) have been used for disease modeling and drug discovery, clinically relevant three-dimensional(3D) functional myocardial microtissues are lacking. Here, we developed a novel ring-shaped cardiac microtissue comprised of chamber-specific tissues to achieve a geometrically non-orientable ventricular myocardial band, similar to a M?bius loop. The ring-shaped cardiac tissue was constructed of hi PSC-CMs and human cardiac fibroblasts(h CFs) through a facile cellular self-assembly approach. It exhibited basic anatomical structure,positive cardiac troponin T(c Tn T) immunostaining, regular calcium transients, and cardiac-like mechanical strength. The cardiac rings can be self-assembled and scaled up into various sizes with outstanding stability, suggesting their potential for precise therapy, pathophysiological investigation, and large-scale drug screening.
文摘We propose a new exactly solvable potential which is Formed by modified Kratzer potential plus a new ring-shaped potential η cot^2 θ/r^2 The solutions of the Dirac equation with equal scalar and vector ring-shaped modified Kratzer potential are found by using the Nikiforov-Uvarov method. The nonrelativistic limit of the energy spectrum has been discussed.
文摘Helicopters are widely used in maritime Search and Rescue(SAR) missions. To ensure the success of SAR missions, search areas need to be carefully planned. With the development of computer technology and weather forecast technology, the survivors’ drift trajectories can be predicted more precisely, which strongly supports the planning of search areas for the rescue helicopter. However, the methods used to determine the search area based on the predicted drift trajectories are mainly derived from the continuous expansion of the area with the highest Probability of Containment(POC), which may lead to local optimal solutions and a decrease in the Probability of Success(POS), especially when there are several subareas with a high POC. To address this problem, this paper proposes a method based on a Minimum Bounding Rectangle and Kmeans clustering(MBRK). A silhouette coefficient is adopted to analyze the distribution of the survivors’ probable locations, which are divided into multiple clusters with K-means clustering. Then,probability maps are generated based on the minimum bounding rectangle of each cluster. By adding or subtracting one row or column of cells or shifting the planned search area, 12 search methods are used to generate the optimal search area starting from the cell with the highest POC in each probability map. Taking a real case as an example, the simulation experiment results show that the POS values obtained by the MBRK method are higher than those obtained by other methods,which proves that the MBRK method can effectively support the planning of search areas and that K-means clustering improves the POS of search plans.
文摘In this paper, the principle of multi-point forming (MPF) technique is presented. One of the most serious defects, wrinkling, during the multi-point forming process of a shallow rectangle cup is discussed by means of numerical simulation on the shallow rectangle cup forming process. The effects of thickness, material of sheet metal and the pressure of the blank holder are investigated. Based on the simulation results, the reasons and control methods of wrinkling are pointed out. Moreover, the experiment on the multi-point die forming of the shallow rectangle cup by the MPF machine is done to validate the efficiency of the numerical simulation, and the result proves that the application of an elastic cushion in the forming can restrain wrinkling efficiently.
基金Supported by the National Natural Science Foundation of China under Grant No. 60806047the Basic Research of Chongqing Education Committee under Grant No. KJ060813
文摘A new ring-shaped non-harmonic oscillator potential is proposed. The precise bound solution of Dirac equation with the potential is gained when the scalar potential is equal to the vector potential. The angular equation and radial equation are obtained through the variable separation method. The results indicate that the normalized angle wave function can be expressed with the generalized associated-Legendre polynomial, and the normalized radial wave function can be expressed with confluent hypergeometric function. And then the precise energy spectrum equations are obtained. The ground state and several low excited states of the system are solved. And those results are compared with the non-relativistic effect energy level in Phys. Lett. A 340 （2005） 94. The positive energy states of system are discussed and the conclusions are made properly.
