Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of pro...Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of products is profoundly influenced by the catalyst structure.In this study,Fe_(2)O_(3)-doped NiSO_(4)/Al_(2)O_(3) catalysts have been meticulously developed to facilitate the selective trimerization of propylene under mild conditions.Significantly,the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst demonstrates an enhanced reaction rate(48.5 mmol_(C3)/(g_(cat).·h)),alongside a high yield of C9(~32.2%),significantly surpassing the performance of the NiSO_(4)/Al_(2)O_(3) catalyst(C9:~24.1%).The incorporation of Fe_(2)O_(3) modifies the migration process of sulfate ions,altering the Lewis acidity of the electron-deficient Ni and Fe sites on the catalyst and resulting a shift in product distribution from a Schulz-Flory distribution to a Poisson distribution.This shift is primarily ascribed to the heightened energy barrier for theβ-H elimination reaction in the C6 alkyl intermediates on the doped catalyst,further promoting polymerization to yield a greater quantity of Type II C9.Furthermore,the validation of the Cossee-Arlman mechanism within the reaction pathway has been confirmed.It is noteworthy that the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst exhibits remarkable stability exceeding 80 h in the selective trimerization of propylene.These research findings significantly enhance our understanding of the mechanisms underlying olefin oligomerization reactions and provide invaluable insights for the development of more effective catalysts.展开更多
With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are hig...With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu^(2+) ions were incorporated Wnto CsCu_(2)I_(3) microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu^(2+)and 582 nm yellow emission from self-trapped exciton e mission of CsCu_(2)I_(3).The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu^(2+)-doped CsCu_(2)I_(3) shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K^(-1)(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu^(2+)-doped GsCu_(2)I_(3) could be a good candidate for highly sensitive optical thermometer.展开更多
The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(...The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.展开更多
In this study, C,N,S-doped ZrO2 and a series of Eu doped C,N,S-ZrO2 photocatalysts were synthesized by a coprecipitation method using thiourea as the source of C, N and S and Eu（NO3）·6H2O as source of Eu. The m...In this study, C,N,S-doped ZrO2 and a series of Eu doped C,N,S-ZrO2 photocatalysts were synthesized by a coprecipitation method using thiourea as the source of C, N and S and Eu（NO3）·6H2O as source of Eu. The materials were characterized by X-ray dif-fraction （XRD）, Raman spectroscopy, Fourier transform infrared spectroscopy （FTIR）, UV-visible diffuse reflectance spectroscopy, scanning electron microscopy （SEM）/energy dispersive X-ray spectroscopy （EDX）, and transmission electron microscopy （TEM）. Indigo carmine （IC） was chosen as a model for organic pollutants and used to evaluate the photocatalytic performance of the photo-catalysts under simulated solar light. Commercial ZrO2 was used as a reference material. XRD and Raman results indicated the for-mation of both tetragonal and monoclinic phase ZrO2 with particle size ranging from 8–30 nm. Multi-element doping had a great in-fluence on the optical responses manifested as red shift in the absorption edge. The highest photocatalytic activity towards IC was observed for the Eu,C,N,S-doped ZrO2 （0.6 mol.%Eu） sample （k=1.09×10–2 min–1）. The commercial ZrO2 showed the lowest photo-degradation activity （k=5.83×10–4 min–1）. The results showed that the control of Eu doping in the C,N,S-ZrO2 was very important in reducing electron-hole recombination. The synergistic effect of Eu, C, N, and S in the ZrO2 matrix led to enhanced utilization of simulated solar energy for the degradation of IC through narrowing of bandgaps.展开更多
The effect of CaF2-doped ZrO2 catalyst for the synthesis of dimethyl carbonate （DMC） was studied by X-ray diffraction （XRD）, CO2-temperature programmed desorption （TPD）, Raman spectra, and X-ray photoelectron sp...The effect of CaF2-doped ZrO2 catalyst for the synthesis of dimethyl carbonate （DMC） was studied by X-ray diffraction （XRD）, CO2-temperature programmed desorption （TPD）, Raman spectra, and X-ray photoelectron spectroscopy （XPS）. Catalytic performance was evaluated in the bath and distillation reactors. Results showed that the CaF2/ZrO2 catalysts had activity and stability for DMC synthesis.展开更多
Copper （Cu）-doped ZrO2 （CZO） films with different Cu content （0 at.%- 8.07 at.%） are successfully deposited on Si （100） substrates by direct current （DC） and radio frequency （RF） magnetron co-sputtering. T...Copper （Cu）-doped ZrO2 （CZO） films with different Cu content （0 at.%- 8.07 at.%） are successfully deposited on Si （100） substrates by direct current （DC） and radio frequency （RF） magnetron co-sputtering. The influences of Cu content on structural, morphological, optical and electrical properties of CZO films are discussed in detail. The CZO films exhibit ZrO2 monocline （1^-11） preferred orientation, which indicates that Cu atoms are doped in ZrO2 host lattice. The crystallite size estimated form x-ray diffraction （XRD） increases by Cu doping, which accords with the result observed from the scanning electron microscope （SEM）. The electrical resistivity decreases from 2.63 Ω·cm to 1.48 Ω·cm with Cu doping content increasing, which indicates that the conductivity of CZO film is improved. However, the visible light transmittances decrease slightly by Cu doping and the optical band gap values decrease from 4.64 eV to 4.48 eV for CZO fihns.展开更多
SiGe-based thermoelectric(TE)materials have gained increasing interests due to their low maintenance costs,environmental friendliness and long lifespan.However,the intrinsically high thermal conductivity of Si-based m...SiGe-based thermoelectric(TE)materials have gained increasing interests due to their low maintenance costs,environmental friendliness and long lifespan.However,the intrinsically high thermal conductivity of Si-based materials also results in poor TE properties.In this investigation,a zirconia(ZrO_(2))composite strategy was applied to an n-type SiGe alloy,tremendously elevating its TE performance.After mechanical alloying and spark plasma sintering(SPS)processes,the ZrO_(2)induced the formation of nanopores in the SiGe matrix via phosphorus adsorption.Moreover,such increase in porosity enhanced the phonon scattering and dramatically suppressed lattice thermal conductivity,from 2.83 to 1.59 W·m^(-1)·K^(-1)at 873 K.Additionally,reduced phosphorus doping led to an increase in Seebeck coefficients and a relatively minor decrease in electrical conductivity,The power factor didn't deteriorate significantly,either,as its maximum of~3.43 mW·m^(-1-)K^(-2)was achieved at 873 K with(Si_(0.8)Ge_(0.2))_(0.097)P_(0.03)(ZrO_(2))_(0.003).In short,a peak figure of merit(ZT)of~1.27 at 873 K and an average ZT~0.7 from 323 to 873 K were obtained.This study demonstrates that the electrical and thermal transportation of SiGe material can be synergistically tuned by compositing ZrO_(2),illustrating a novel strategy to optimize the TE properties of bulk materials.展开更多
Cu^2＋-doped nanostructured TiO2-coated SiO2 （TiO2/SiO2） particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized by the sol-gel ...Cu^2＋-doped nanostructured TiO2-coated SiO2 （TiO2/SiO2） particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized by the sol-gel method using TiOSO4 as a precursor. The experimental results showed that TiO2 nanopowders on the surface of SiO2 particles were well distributed and compact. The amount of TiO2 increased with the increase in coating layers. The shell structure appeared to be composed of anatase titania nanocrystals at 550℃. The 2-layer coated TiO2 particles on the surface showed a higher degradation rate compared with all the different-layer samples. The photocatalytic activity of Cu^2＋-doped TiO2/SiO2 was higher than that ofundoped TiO2/SiO2. The optimum dopant content was about 0.10wt%.展开更多
In this work,Eu^(3+)-doped CsPbCl_(2)Br_(1) in borosilicate glass was successfully synthesized by the melt quenching annealing technique and crystallization method.This work reports a novel Eu^(3+)-doped CsPbCl_(2)Br_...In this work,Eu^(3+)-doped CsPbCl_(2)Br_(1) in borosilicate glass was successfully synthesized by the melt quenching annealing technique and crystallization method.This work reports a novel Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite quantum dots(QDs)glass with high sensitivity for optical temperature sensing.The relation of fluorescence intensity ratio(FIR)with the temperature was studied in the temperature range of 80-440 K.Notably,the maximum absolute temperature sensitivity(Sa)and relative temperature sensitivity(Sr)of Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite QDs glass can reach as high as 0.0315 K-1 and3.097%/K,respectively.Meanwhile,Eu^(3+)-doped CsPbCl_(2)Br_(1) QDs glass demonstrates good water resistance,excellent thermal and cold cycling stability performance,The Eu^(3+)-doped QDs glass materials can bring inspiration to the future exploration of rare earth ion-doped QDs glass material on the application of optical temperature sensing in the future.展开更多
Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscalin...Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.展开更多
The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of ...The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of thin films were inspected at different sintering temperatures by constructing a humidity-impedance measuring system. It was found that the addition of rare earth ion La^3＋ and alkali ion K^＋ was beneficial for improving the humidity sensitive properties of the samples and La0.003K0.5Ti0.9Sn0.1O2 sintered at 500 ℃ for 4 h showed the best humidity sensing properties. The impedance of this thin film decreased from 109 to 104 Ω with excellent linearity in the humidity range of 11%-95%. Narrow hysteresis loop, prominent stability and high sensitivity were obtained. The effects of dopant con-tent and doping mechanism on humidity sensitivity were also discussed in terms of segregation of rare earth ions at grain boundaries and granularity of crystalline and influence of K^＋ on the decrease in the intrinsic resistance of the materials, and increase in the number of wa-ter adsorption sites.展开更多
In order to achieve a modulator with broad bandwidth and perfect impedance match,a novel electro-optical modulator based on GeO2-doped silica waveguides on silicon substrate is designed.The finite element model of the...In order to achieve a modulator with broad bandwidth and perfect impedance match,a novel electro-optical modulator based on GeO2-doped silica waveguides on silicon substrate is designed.The finite element model of the whole electro-optical modulator is established by means of ANSYS.With the finite element method analysis,the performance of the novel modulator is predicted.The simulation reveals that the designed modulator operates with a product of 3 dB optical bandwidth and modulating length of 226.59 GHz·cm,and a characteristic impedance of 51.6 Ω at 1 550 nm wavelength.Moreover,the calculated electrical reflected power of coplanar waveguide electrode is below-20 dB in the frequency ranging from 45 MHz to 65 GHz.Therefore,the designed modulator has wide modulation bandwidth and perfect impedance match.展开更多
A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence...A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.展开更多
We report the structural and photoluminescence(PL) properties of Nd^(3+)-doped Y_(2)O_(3)-SiO_(2) powders(Y_(2)O_(3)-SiO_(2):Nd^(3+)) as functions of annealing temperature and Nd^(3+) ion doping concentration.Y_(2)O_(...We report the structural and photoluminescence(PL) properties of Nd^(3+)-doped Y_(2)O_(3)-SiO_(2) powders(Y_(2)O_(3)-SiO_(2):Nd^(3+)) as functions of annealing temperature and Nd^(3+) ion doping concentration.Y_(2)O_(3)-SiO_(2):Nd^(3+)powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd^(3+) concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(^(4)F_(3/2)→^(4)I_(11/2)) and 1350 nm(^(4)F_(3/2)→^(4)I_(13/2)).展开更多
TiO2 powder and TiO2 thin film on the surface of glazed ceramic tile were prepared by sol-gel method.The influences of different doping Cr3+ concentration on the photocatalytic activity of TiO2 were discussed, UV-visi...TiO2 powder and TiO2 thin film on the surface of glazed ceramic tile were prepared by sol-gel method.The influences of different doping Cr3+ concentration on the photocatalytic activity of TiO2 were discussed, UV-visible and X-ray diffraction analysis were used to test the performance of TiO2 powder and film. The results indicate that photocatalytic activity of doping Cr3+-TiO2 thin film is higher than that of powder, and the interaction between Cr3+-doped and substrate can greatly enhance the photocatalytic activity. The results of X-ray diffraction and photoabsorption show that the Cr3+ -doped energy level in TiO2 is 0. 62 eV high from the top of valence band, which belongs to the type of deep energy level doping. On the basis of the semiconductor energy level theory and Cr3+ dopant energy level, the semiconductor energy level model of Cr3+ in TiO2 powder and thin film were established, and the doping mechanisms of Cr3+-doped in TiO2 powder and thin film were analyzed.展开更多
Y2O3-doped Mo secondary emitters were prepared by liquid-liquid doping and solid-solid doping,respectively.The back-scattered scanning observation result indicates that the emitter prepared by liquid-liquid doping has...Y2O3-doped Mo secondary emitters were prepared by liquid-liquid doping and solid-solid doping,respectively.The back-scattered scanning observation result indicates that the emitter prepared by liquid-liquid doping has fine microstructure whereas that prepared by solid-solid doping has large grain size.Y2O3-doped Mo emitter with small grain size prepared by liquid-liquid doping exhibits high emission property,i.e.,the secondary electron yield can get to 5.24,about 1.7 times that prepared by solid-solid doping.Moreover,Y2O3-doped Mo emitter exhibits the best emission performance among La2O3-doped Mo,Y2O3-doped Mo, Gd2O3-doped Mo and Ce2O3-doped Mo emitters due to the largest penetration depth of primary electrons and escape depth of secondary electrons in this emitter.The secondary emission of the emitter with small grain size can be explained by reflection emission model and transmission emission model,whereas only transmission emission exists in the emitter with large grain size.展开更多
The study of nanocrystalline SnO2 (n-SnO2) and SiO2-doped SnO2 (n-Si-SnO2) samples pre-pared by the sol-gel process showed that SiO2 doping can effectively restrained the growth of nanocrystalline SnO2 grains, thus im...The study of nanocrystalline SnO2 (n-SnO2) and SiO2-doped SnO2 (n-Si-SnO2) samples pre-pared by the sol-gel process showed that SiO2 doping can effectively restrained the growth of nanocrystalline SnO2 grains, thus improving thermal stability of the materials.展开更多
In this paper,La（3）-doped Nano-TiO2（La（3）-TiO2） was synthesized via hydrothermal process.Structure and optical properties of the synthesized samples were characterized via XRD,FT-IR,DRS,etc.The results showed th...In this paper,La（3）-doped Nano-TiO2（La（3）-TiO2） was synthesized via hydrothermal process.Structure and optical properties of the synthesized samples were characterized via XRD,FT-IR,DRS,etc.The results showed that the phase transformation of TiO2 from anatase to rutile was effectively prevented by La（3）-doping,which improved the thermal stability of anatase,and also suppressed particle aggregation and grain growth of TiO2.The formation of Ti-O-La bond promoted UV absorption intensity of TiO2,and provoked red shift of absorbed light.And the spectra response range of TiO2 was extended significantly to visible light by La（3）-doping,then photocatalytic performance was improved effectively.Compared with pure nano-TiO2,the performance of La（3）-TiO2 which photocatalyticly degraded methyl orange was increased significantly.展开更多
文摘Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of products is profoundly influenced by the catalyst structure.In this study,Fe_(2)O_(3)-doped NiSO_(4)/Al_(2)O_(3) catalysts have been meticulously developed to facilitate the selective trimerization of propylene under mild conditions.Significantly,the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst demonstrates an enhanced reaction rate(48.5 mmol_(C3)/(g_(cat).·h)),alongside a high yield of C9(~32.2%),significantly surpassing the performance of the NiSO_(4)/Al_(2)O_(3) catalyst(C9:~24.1%).The incorporation of Fe_(2)O_(3) modifies the migration process of sulfate ions,altering the Lewis acidity of the electron-deficient Ni and Fe sites on the catalyst and resulting a shift in product distribution from a Schulz-Flory distribution to a Poisson distribution.This shift is primarily ascribed to the heightened energy barrier for theβ-H elimination reaction in the C6 alkyl intermediates on the doped catalyst,further promoting polymerization to yield a greater quantity of Type II C9.Furthermore,the validation of the Cossee-Arlman mechanism within the reaction pathway has been confirmed.It is noteworthy that the 0.25Fe_(2)O_(3)-NiSO_(4)/Al_(2)O_(3) catalyst exhibits remarkable stability exceeding 80 h in the selective trimerization of propylene.These research findings significantly enhance our understanding of the mechanisms underlying olefin oligomerization reactions and provide invaluable insights for the development of more effective catalysts.
基金supported by the National Natural Science Foundation of China (62205072)Natural Science Foundation of Guangxi(2022GXNSFBA035656)+1 种基金Science and Technology Agency of Guangxi (GuikeAD20159054)Education Department of Guangxi (2019KY0004)。
文摘With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu^(2+) ions were incorporated Wnto CsCu_(2)I_(3) microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu^(2+)and 582 nm yellow emission from self-trapped exciton e mission of CsCu_(2)I_(3).The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu^(2+)-doped CsCu_(2)I_(3) shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K^(-1)(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu^(2+)-doped GsCu_(2)I_(3) could be a good candidate for highly sensitive optical thermometer.
文摘The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.
基金Project supported by the National Research Fund of South Africa
文摘In this study, C,N,S-doped ZrO2 and a series of Eu doped C,N,S-ZrO2 photocatalysts were synthesized by a coprecipitation method using thiourea as the source of C, N and S and Eu（NO3）·6H2O as source of Eu. The materials were characterized by X-ray dif-fraction （XRD）, Raman spectroscopy, Fourier transform infrared spectroscopy （FTIR）, UV-visible diffuse reflectance spectroscopy, scanning electron microscopy （SEM）/energy dispersive X-ray spectroscopy （EDX）, and transmission electron microscopy （TEM）. Indigo carmine （IC） was chosen as a model for organic pollutants and used to evaluate the photocatalytic performance of the photo-catalysts under simulated solar light. Commercial ZrO2 was used as a reference material. XRD and Raman results indicated the for-mation of both tetragonal and monoclinic phase ZrO2 with particle size ranging from 8–30 nm. Multi-element doping had a great in-fluence on the optical responses manifested as red shift in the absorption edge. The highest photocatalytic activity towards IC was observed for the Eu,C,N,S-doped ZrO2 （0.6 mol.%Eu） sample （k=1.09×10–2 min–1）. The commercial ZrO2 showed the lowest photo-degradation activity （k=5.83×10–4 min–1）. The results showed that the control of Eu doping in the C,N,S-ZrO2 was very important in reducing electron-hole recombination. The synergistic effect of Eu, C, N, and S in the ZrO2 matrix led to enhanced utilization of simulated solar energy for the degradation of IC through narrowing of bandgaps.
基金Project supported by the National Natural Science Foundation of China(Grant No.10271074)
文摘The effect of CaF2-doped ZrO2 catalyst for the synthesis of dimethyl carbonate （DMC） was studied by X-ray diffraction （XRD）, CO2-temperature programmed desorption （TPD）, Raman spectra, and X-ray photoelectron spectroscopy （XPS）. Catalytic performance was evaluated in the bath and distillation reactors. Results showed that the CaF2/ZrO2 catalysts had activity and stability for DMC synthesis.
基金supported by the National Natural Science Foundation of China(Grant Nos.51272224 and 11164031)
文摘Copper （Cu）-doped ZrO2 （CZO） films with different Cu content （0 at.%- 8.07 at.%） are successfully deposited on Si （100） substrates by direct current （DC） and radio frequency （RF） magnetron co-sputtering. The influences of Cu content on structural, morphological, optical and electrical properties of CZO films are discussed in detail. The CZO films exhibit ZrO2 monocline （1^-11） preferred orientation, which indicates that Cu atoms are doped in ZrO2 host lattice. The crystallite size estimated form x-ray diffraction （XRD） increases by Cu doping, which accords with the result observed from the scanning electron microscope （SEM）. The electrical resistivity decreases from 2.63 Ω·cm to 1.48 Ω·cm with Cu doping content increasing, which indicates that the conductivity of CZO film is improved. However, the visible light transmittances decrease slightly by Cu doping and the optical band gap values decrease from 4.64 eV to 4.48 eV for CZO fihns.
基金financially supported by the National Key Research and Development Program of China(Nos.2022YFE0119100 and 2017YFE0198000)the National Natural Science Foundation of China(Nos.U21A2054,52273285,52061009 and 52262032)Guangxi Science and Technology Planning Project(No.AD21220056)。
文摘SiGe-based thermoelectric(TE)materials have gained increasing interests due to their low maintenance costs,environmental friendliness and long lifespan.However,the intrinsically high thermal conductivity of Si-based materials also results in poor TE properties.In this investigation,a zirconia(ZrO_(2))composite strategy was applied to an n-type SiGe alloy,tremendously elevating its TE performance.After mechanical alloying and spark plasma sintering(SPS)processes,the ZrO_(2)induced the formation of nanopores in the SiGe matrix via phosphorus adsorption.Moreover,such increase in porosity enhanced the phonon scattering and dramatically suppressed lattice thermal conductivity,from 2.83 to 1.59 W·m^(-1)·K^(-1)at 873 K.Additionally,reduced phosphorus doping led to an increase in Seebeck coefficients and a relatively minor decrease in electrical conductivity,The power factor didn't deteriorate significantly,either,as its maximum of~3.43 mW·m^(-1-)K^(-2)was achieved at 873 K with(Si_(0.8)Ge_(0.2))_(0.097)P_(0.03)(ZrO_(2))_(0.003).In short,a peak figure of merit(ZT)of~1.27 at 873 K and an average ZT~0.7 from 323 to 873 K were obtained.This study demonstrates that the electrical and thermal transportation of SiGe material can be synergistically tuned by compositing ZrO_(2),illustrating a novel strategy to optimize the TE properties of bulk materials.
基金the Department of Education of Hebei Province, China (No.2005362)
文摘Cu^2＋-doped nanostructured TiO2-coated SiO2 （TiO2/SiO2） particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized by the sol-gel method using TiOSO4 as a precursor. The experimental results showed that TiO2 nanopowders on the surface of SiO2 particles were well distributed and compact. The amount of TiO2 increased with the increase in coating layers. The shell structure appeared to be composed of anatase titania nanocrystals at 550℃. The 2-layer coated TiO2 particles on the surface showed a higher degradation rate compared with all the different-layer samples. The photocatalytic activity of Cu^2＋-doped TiO2/SiO2 was higher than that ofundoped TiO2/SiO2. The optimum dopant content was about 0.10wt%.
基金Project supported by the National Natural Science Foundation of China(51872207,51672192)。
文摘In this work,Eu^(3+)-doped CsPbCl_(2)Br_(1) in borosilicate glass was successfully synthesized by the melt quenching annealing technique and crystallization method.This work reports a novel Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite quantum dots(QDs)glass with high sensitivity for optical temperature sensing.The relation of fluorescence intensity ratio(FIR)with the temperature was studied in the temperature range of 80-440 K.Notably,the maximum absolute temperature sensitivity(Sa)and relative temperature sensitivity(Sr)of Eu^(3+)-doped CsPbCl_(2)Br_(1) perovskite QDs glass can reach as high as 0.0315 K-1 and3.097%/K,respectively.Meanwhile,Eu^(3+)-doped CsPbCl_(2)Br_(1) QDs glass demonstrates good water resistance,excellent thermal and cold cycling stability performance,The Eu^(3+)-doped QDs glass materials can bring inspiration to the future exploration of rare earth ion-doped QDs glass material on the application of optical temperature sensing in the future.
基金financially supported by the National Key R&D Program of China (No. 2018YFB1502203-1)the Guangdong Basic and Applied Basic Research Foundation (No. 2021B1515120087)the Stable Supporting Fund of Shenzhen, China (No. GXWD20201230155427003-202007 28114835006)
文摘Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.
文摘The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of thin films were inspected at different sintering temperatures by constructing a humidity-impedance measuring system. It was found that the addition of rare earth ion La^3＋ and alkali ion K^＋ was beneficial for improving the humidity sensitive properties of the samples and La0.003K0.5Ti0.9Sn0.1O2 sintered at 500 ℃ for 4 h showed the best humidity sensing properties. The impedance of this thin film decreased from 109 to 104 Ω with excellent linearity in the humidity range of 11%-95%. Narrow hysteresis loop, prominent stability and high sensitivity were obtained. The effects of dopant con-tent and doping mechanism on humidity sensitivity were also discussed in terms of segregation of rare earth ions at grain boundaries and granularity of crystalline and influence of K^＋ on the decrease in the intrinsic resistance of the materials, and increase in the number of wa-ter adsorption sites.
基金Supported by National Natural Science Foundation of China (No.60577023)Key Laboratory of Opto-Electronics Information and Technical Science of Ministry of Education,China
文摘In order to achieve a modulator with broad bandwidth and perfect impedance match,a novel electro-optical modulator based on GeO2-doped silica waveguides on silicon substrate is designed.The finite element model of the whole electro-optical modulator is established by means of ANSYS.With the finite element method analysis,the performance of the novel modulator is predicted.The simulation reveals that the designed modulator operates with a product of 3 dB optical bandwidth and modulating length of 226.59 GHz·cm,and a characteristic impedance of 51.6 Ω at 1 550 nm wavelength.Moreover,the calculated electrical reflected power of coplanar waveguide electrode is below-20 dB in the frequency ranging from 45 MHz to 65 GHz.Therefore,the designed modulator has wide modulation bandwidth and perfect impedance match.
基金supported by the Education Department of Zhejiang Province (20050359)
文摘A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.
基金The authors would like to thank the financial support by a 2019 research fund from Chosun University.
文摘We report the structural and photoluminescence(PL) properties of Nd^(3+)-doped Y_(2)O_(3)-SiO_(2) powders(Y_(2)O_(3)-SiO_(2):Nd^(3+)) as functions of annealing temperature and Nd^(3+) ion doping concentration.Y_(2)O_(3)-SiO_(2):Nd^(3+)powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd^(3+) concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(^(4)F_(3/2)→^(4)I_(11/2)) and 1350 nm(^(4)F_(3/2)→^(4)I_(13/2)).
基金Project (20466001) supported by the National Natural Science Foundation of China
文摘TiO2 powder and TiO2 thin film on the surface of glazed ceramic tile were prepared by sol-gel method.The influences of different doping Cr3+ concentration on the photocatalytic activity of TiO2 were discussed, UV-visible and X-ray diffraction analysis were used to test the performance of TiO2 powder and film. The results indicate that photocatalytic activity of doping Cr3+-TiO2 thin film is higher than that of powder, and the interaction between Cr3+-doped and substrate can greatly enhance the photocatalytic activity. The results of X-ray diffraction and photoabsorption show that the Cr3+ -doped energy level in TiO2 is 0. 62 eV high from the top of valence band, which belongs to the type of deep energy level doping. On the basis of the semiconductor energy level theory and Cr3+ dopant energy level, the semiconductor energy level model of Cr3+ in TiO2 powder and thin film were established, and the doping mechanisms of Cr3+-doped in TiO2 powder and thin film were analyzed.
基金Projects(2006AA03Z524,2008AA031001)supported by the National Hi-tech Research and Development Program of ChinaProject(50801001)supported by the National Natural Foundation of China
文摘Y2O3-doped Mo secondary emitters were prepared by liquid-liquid doping and solid-solid doping,respectively.The back-scattered scanning observation result indicates that the emitter prepared by liquid-liquid doping has fine microstructure whereas that prepared by solid-solid doping has large grain size.Y2O3-doped Mo emitter with small grain size prepared by liquid-liquid doping exhibits high emission property,i.e.,the secondary electron yield can get to 5.24,about 1.7 times that prepared by solid-solid doping.Moreover,Y2O3-doped Mo emitter exhibits the best emission performance among La2O3-doped Mo,Y2O3-doped Mo, Gd2O3-doped Mo and Ce2O3-doped Mo emitters due to the largest penetration depth of primary electrons and escape depth of secondary electrons in this emitter.The secondary emission of the emitter with small grain size can be explained by reflection emission model and transmission emission model,whereas only transmission emission exists in the emitter with large grain size.
文摘The study of nanocrystalline SnO2 (n-SnO2) and SiO2-doped SnO2 (n-Si-SnO2) samples pre-pared by the sol-gel process showed that SiO2 doping can effectively restrained the growth of nanocrystalline SnO2 grains, thus improving thermal stability of the materials.
基金Supported by Fujian High-tech Project Foundation (No 2004H008)
文摘In this paper,La（3）-doped Nano-TiO2（La（3）-TiO2） was synthesized via hydrothermal process.Structure and optical properties of the synthesized samples were characterized via XRD,FT-IR,DRS,etc.The results showed that the phase transformation of TiO2 from anatase to rutile was effectively prevented by La（3）-doping,which improved the thermal stability of anatase,and also suppressed particle aggregation and grain growth of TiO2.The formation of Ti-O-La bond promoted UV absorption intensity of TiO2,and provoked red shift of absorbed light.And the spectra response range of TiO2 was extended significantly to visible light by La（3）-doping,then photocatalytic performance was improved effectively.Compared with pure nano-TiO2,the performance of La（3）-TiO2 which photocatalyticly degraded methyl orange was increased significantly.
