ZnO-CeO2 nanostructures were synthesized by simple and effcient low temperature method. The structure and morphology of the ZnO-CeO2 nanostructures were characterized by X-ray powder diffraction （XRD） and field emis...ZnO-CeO2 nanostructures were synthesized by simple and effcient low temperature method. The structure and morphology of the ZnO-CeO2 nanostructures were characterized by X-ray powder diffraction （XRD） and field emission scanning electron microscopy （FESEM）, which revealed elongated shaped CeO2 nanoparticles with diameters of 40–90 nm distributed on the surface of elongated ZnO nanostructures with diameters of 50–200 nm （edge–centre）. Further the structure of the synthesized ZnO-CeO2 nanostructure was supported by Raman spectra and Fourier transform infrared spectroscopy （FTIR）. UV-vis absorption spectrum was used to confirm the optical properties of the CeO2 doped ZnO nanostructures. Photo-catalytic activity of CeO2 doped ZnO nanostructure was evaluated by degradation of acridine orange and methylene blue which degraded 84.55% and 48.65% in 170 min, respectively. ZnO-CeO2 nanostructures also showed good sensitivity （0.8331 μA·cm-2·（mol/l）-1） in short response time （10 s） by applying to chemical sensing using ethanol as a target compound by I-V technique. These degradation and chemical sensing properties of ZnO-CeO2 nanostructures are of great importance for the application of ZnO-CeO2 system as a photo-catalyst and chemical sensor.展开更多
TiO2 nanostructures were fabricated by a reaction of Ti foils in H2O2 solution at mild temperature, Porous TiO2 nanostructurcs, well adhered to Ti foil surfaces, were formed at 80 ℃ in 10 rain, and then flower- like ...TiO2 nanostructures were fabricated by a reaction of Ti foils in H2O2 solution at mild temperature, Porous TiO2 nanostructurcs, well adhered to Ti foil surfaces, were formed at 80 ℃ in 10 rain, and then flower- like and rod nanostructures formed in succession after a longer reaction time. Samples prepared at 80 ℃ for 4 h arc amorphous, and anatase-dominated crystal phase emerged in the sample prepared for as long as 10 h. Almost pure anatase phase were obtained in TiO2 nanostructures by annealing the samples at a temperature of 300 ℃. Photoeatalysis of the TiO2 nanostructures was characterized by the degradation of RhB dye molecules in an aqueous solution exposed to ultraviolet light. Results show a 7 cm^2 annealed TiO2 flower-like nanostrueture having the degradation rate of RhB as fast as 29.8 times that of the dye solution exposed to ultraviolet light alone.展开更多
The current COVID-19 pandemic urges the extremely sensitive and prompt detection of SARS-CoV-2 virus.Here,we present a Human Angiotensin-converting-enzyme 2(ACE2)-functionalized gold“virus traps”nanostructure as an ...The current COVID-19 pandemic urges the extremely sensitive and prompt detection of SARS-CoV-2 virus.Here,we present a Human Angiotensin-converting-enzyme 2(ACE2)-functionalized gold“virus traps”nanostructure as an extremely sensitive SERS biosensor,to selectively capture and rapidly detect S-protein expressed coronavirus,such as the current SARS-CoV-2 in the contaminated water,down to the single-virus level.Such a SERS sensor features extraordinary 106-fold virus enrichment originating from high-affinity of ACE2 with S protein as well as“virus-traps”composed of oblique gold nanoneedles,and 109-fold enhancement of Raman signals originating from multi-component SERS effects.Furthermore,the identification standard of virus signals is established by machine-learning and identification techniques,resulting in an especially low detection limit of 80 copies mL^(−1) for the simulated contaminated water by SARS-CoV-2 virus with complex circumstance as short as 5 min,which is of great significance for achieving real-time monitoring and early warning of coronavirus.Moreover,here-developed method can be used to establish the identification standard for future unknown coronavirus,and immediately enable extremely sensitive and rapid detection of novel virus.展开更多
PANI copolymer micro/nanostructures with different surface wettability were obtained from the chemical oxidation copolymerization of aniline(Ani)with 2-ethyl aniline(EA)at diverse[EA]/[Ani+EA]molar ratios,by employing...PANI copolymer micro/nanostructures with different surface wettability were obtained from the chemical oxidation copolymerization of aniline(Ani)with 2-ethyl aniline(EA)at diverse[EA]/[Ani+EA]molar ratios,by employing ammonium persulfate as an oxidant.The results revealed that the poly(aniline-co-2-ethyl aniline)(PANI-EA)copolymer micro/nanostructures exhibited satisfactory anticorrosion performance for carbon steel,and the corrosion protection efficiency increased with the increase of water repellent property.Poly(2-ethyl aniline)(PEA)showed the largest contact angle(CA=145°)and show the best corrosion protection for the carbon steel(h=87.29%).It is found that the superior anticorrosion property of PEA is attributed to its high hydrophobicity,low conductivity and low porosity.展开更多
Flower-like Cu2SnS3 nanostructures composed of nano-flakes were successfully synthesized by solvothermal technique at 180 ℃ for 16 h. In the preparation process, CuCl2·H2O, SnCl2·2H2O and thiourea were used...Flower-like Cu2SnS3 nanostructures composed of nano-flakes were successfully synthesized by solvothermal technique at 180 ℃ for 16 h. In the preparation process, CuCl2·H2O, SnCl2·2H2O and thiourea were used as raw materials, and ethylene glycol were used as solvent. The results showed that the obtained product was pure phase Cu2SnS3. The average diameter of Cu2SnS3 flowers and the thickness of the nano-flakes were about 1-1.5 μm and 10 nm, respectively. The influence of reaction time and solvents on the morphology, size and structure of the products was investigated by powder X-ray diffraction and field-emission scan electron microscopy （FESEM）. The ultraviolet-visible absorption spectrum measurement indicated that the band gap of the sample was about 1.26 eV and could be applied to the absorbing layer of thin solar cell. The possible formation mechanism of flower-like Cu2SnS3 was also proposed and discussed.展开更多
In this study,hierarchical Ag/La2 O2 CO3 micro/nanostructures(MNSs)were synthesized by in situ loading Ag nanoparticles(NPs)on the surface of the La2 O2 CO3 MNSs.The prepared La2 O2 CO3 MNSs present flower-like shape ...In this study,hierarchical Ag/La2 O2 CO3 micro/nanostructures(MNSs)were synthesized by in situ loading Ag nanoparticles(NPs)on the surface of the La2 O2 CO3 MNSs.The prepared La2 O2 CO3 MNSs present flower-like shape and can be tuned by the molar ratio of La(NO3)3 and CO(NH2)2.In the molar ratio of 1:2 to 1:55,the La2 O2 CO3 MNSs mainly consist of polyhedral rods,irregular rods and irregular spindles and their size is about 10,8 and 7μm,respectively.After loading Ag NPs,the spindle-like Ag/La2 O2 CO3 MNSs were used for phosphate removal and antibacterial activity.At the initial phosphate concentration of20 mg/L,the removal rate is 59.6%.The Ag/La2 O2 CO3 MNSs have significant antibacterial activity and their MIC values for S.aureus and E.coli are 31.3 and 15.6μg/mL,respectively.The results indicate that Ag/La2 O2 CO3 MNSs may have good application prospects in open water to inhibit bacterial growth.展开更多
Well crystalline gadolinium oxide（Gd2O3） nanostructures were grown by annealing the hydrothermally as-prepared nanostructures without using any template. Microscopic studies of Gd2O3 nanostructures were recorded alo...Well crystalline gadolinium oxide（Gd2O3） nanostructures were grown by annealing the hydrothermally as-prepared nanostructures without using any template. Microscopic studies of Gd2O3 nanostructures were recorded along the [111] direction due to the clearly resolved interplanar distance d（222）-0.31 nm of the cubic crystal structure Gd2O3. Sensing mechanism of Gd2O3 as efficient electron mediator for the detection of ethanol was explored. As-fabricated sensor demonstrated the high-sensitivity of -0.266 μAm/M/cm2 with low detection limit（-52.2 μmol/L） and correlation coefficient（r^2, 0.618）. To the best of our knowledge, this was the first report for the detection of ethanol using as-grown（at 1000 oC） Gd2O3 nanostructures by simple and reliable Ⅰ-Ⅴ technique and rapid assessment of the reaction kinetics（in the order of seconds）. The low cost of the starting reagents and the simplicity of the synthetic route made it a promising chemical sensor for the detection of various toxic analytes, which are not environmentally safe.展开更多
Crystallineγ-Ga_(2)O_(3)@rGO core-shell nanostructures are synthesized in gram scale,which are accomplished by a facile sonochemical strategy under ambient condition.They are composed of uniformγ-Ga_(2)O_(3)nanosphe...Crystallineγ-Ga_(2)O_(3)@rGO core-shell nanostructures are synthesized in gram scale,which are accomplished by a facile sonochemical strategy under ambient condition.They are composed of uniformγ-Ga_(2)O_(3)nanospheres encapsulated by reduced graphene oxide(rGO)nanolayers,and their formation is mainly attributed to the existed opposite zeta potential between the Ga_(2)O_(3)and rGO.The as-constructed lithium-ion batteries(LIBs)based on as-fabricatedγ-Ga_(2)O_(3)@rGO nanostructures deliver an initial discharge capacity of 1000 mAh g^(-1)at 100 mA g^(-1)and reversible capacity of 600 mAh g^(-1)under 500 mA g^(-1)after 1000 cycles,respectively,which are remarkably higher than those of pristineγ-Ga_(2)O_(3)with a much reduced lifetime of 100 cycles and much lower capacity.Ex situ XRD and XPS analyses demonstrate that the reversible LIBs storage is dominant by a conversion reaction and alloying mechanism,where the discharged product of liquid metal Ga exhibits self-healing ability,thus preventing the destroy of electrodes.Additionally,the rGO shell could act robustly as conductive network of the electrode for significantly improved conductivity,endowing the efficient Li storage behaviors.This work might provide some insight on mass production of advanced electrode materials under mild condition for energy storage and conversion applications.展开更多
Titanium dioxide （TiO2） nanosheet, nanorod and nanotubes are synthesized using chemical vapor deposition （CVD） and anodizing processes. TiO2 nanosheets are grown on Ti foil which is coated with Au catalyst in CVD,...Titanium dioxide （TiO2） nanosheet, nanorod and nanotubes are synthesized using chemical vapor deposition （CVD） and anodizing processes. TiO2 nanosheets are grown on Ti foil which is coated with Au catalyst in CVD, TiO2 nanorods are synthesized on treated Ti foil with HCl by CVD, and TiO2 nanotubes are prepared by the three-step anodization method. Scanning electron microscopy shows the final TiO2 structures prepared using three processes with three different morphologies of nanosheet, nanorod and nanotube. X-ray diffraction verifies the presence of TiO2. TiO2 sheets and rods are crystalized in rutile phase, and TiO2 tubes after annealing turn into the anatase crystal phase. The optical investigations carried out by diffuse reflection spectroscopy reveal that the morphology of TiO2 nanostructures influencing their optical response and band gap energy of TiO2 is changed for different TiO2 nanostructures.展开更多
This work reports the cost-effective growth of Mg:PbI2 nanostructures with 0,1,2.5 and 5.0 wt.%Mg doping concentrations.Structural,vibrational,morphological properties are analyzed using x-ray diffraction(XRD),Raman s...This work reports the cost-effective growth of Mg:PbI2 nanostructures with 0,1,2.5 and 5.0 wt.%Mg doping concentrations.Structural,vibrational,morphological properties are analyzed using x-ray diffraction(XRD),Raman spectroscopy and scanning electron microscopy(SEM).XRD and Raman studies confirm the monophasic hexagonal system of Mg:PbI2,and no additional impurity peaks are detected.The Scherrer formula is used to determine sizes of crystallites to be in the range of 47-52 nm.EDX/SEM e-mapping analyses confirm the incorporation of Mg in PbI2 matrix and its uniform distribution throughout the sample.The hexagonal nanosheet-and nanoplate-like morphologies are detected in SEM images for pure and Mg-doped PbI2.An optical band gap of nanostructures is obtained from Tauc’s relation to be in the range 3.0-3.25 eV.Dielectric and electrical properties are found in significant enhancement as Mg doping in PbI2 matrix,also the conduction mechanism is discussed.展开更多
The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and trib...The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and tribological properties of the composite coatings were researched. The results show that the composite coatings mainly consist of γ-Ni, α-Al2O3, γ-Al2O3 and rutile-TiO2 etc, and exhibit lower friction coefficients and wear losses than the Ni-based alloy coatings at different loads and speeds. The composite coating bears low contact stress at 3 N and its wear mechanism is micro-cutting wear. As loads increase to 6-12 N, the contact stress is higher than the elastic limit stress of worn surface, and the wear mechanisms change into multi-plastic deformation wear, micro-brittle fracture wear and abrasive wear. With the increase of speeds, the contact temperature of worn surface increases. The composite coating experiences multi-plastic deformation wear, fatigue wear and adhesive wear.展开更多
Cerium-doped SiO2/TiO2 nanostructured fibers were fabricated by electrospinning technology. The prepared fibers were characterized by thermogravimetric analysis （TGA）, scanning electron microscopy （SEM）, X-ray dif...Cerium-doped SiO2/TiO2 nanostructured fibers were fabricated by electrospinning technology. The prepared fibers were characterized by thermogravimetric analysis （TGA）, scanning electron microscopy （SEM）, X-ray diffraction （XRD） and Fourier transform infrared spectroscopy （FT-IR）. Using the fibers as catalysts, photoeatalytic degradation of Methylene Blue （MB） aqueous solution was carded out under simulated sunlight. The 0.2% Ce doping proved to be the optimal concentration for the doping of TiO2/SiO2, compared to other Ce-doped molar concentrations. The 0.2% Ce-doped SiOdTiO2 fibers exhibited higher photocatalytic activity than industrial Degussa P25 and the samples doped with only Ce or SIO2. The reasons for improving the photocatalytic activity were also discussed. Several operational parameters were studied, which showed that the photocatalytic efficiency of MB was influenced by parameters such as the initial dye concentration, the initial pH, inorganic anions, and so on. In addition, the influences of an electron acceptor and a radical scavenger suggested that OH was the dominant photooxidant during the photocatalytic process. The reuse evaluation of the fibers indicated that their photocatalytic activity had good stability.展开更多
Iron（Ⅲ）-doped nanostructure TiO2-coated SiO2 （TiO2/SiO2） particles were prepared using the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized employing...Iron（Ⅲ）-doped nanostructure TiO2-coated SiO2 （TiO2/SiO2） particles were prepared using the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized employing the sol-gel method with TiChas a precursor. The samples were characterized by Fourier transform infrared spectroscopy （FTIR）, SEM, EDS, XPS, and XRD. The experimental results show that TiO2 nanopowders on the surface of SiO2 particles are well distributed, the amount of TiO2 is increased with the adding of coating layers, the pure anatase-TiO2 coating layers are synthesized at 500℃, and the photocatalytic activity of Fe^3＋-doped TiO2/SiO2 is higher than that of undoped TiO2/SiO2.展开更多
The burgeoning global economy during the past decades gives rise to the continuous increase in fossil fuels consumption and rapid growth of CO_(2) emission,which demands an urgent exploration into green and sustainabl...The burgeoning global economy during the past decades gives rise to the continuous increase in fossil fuels consumption and rapid growth of CO_(2) emission,which demands an urgent exploration into green and sustainable devices for energy storage and power management.Supercapacitors based on activated carbon electrodes are promising systems for highly efficient energy harvesting and power supply,but their promotion is hindered by the moderate energy density compared with batteries.Therefore,scalable conversion of CO_(2) into novel carbon nanostructures offers a powerful alternative to tackle both issues:mitigating the greenhouse effect caused by redundant atmospheric CO_(2) and providing carbon materials with enhanced electrochemical performances.In this tutorial review,the techniques,opportunities and barriers in the design and fabrication of advanced carbon materials using CO_(2) as feedstock as well as their impact on the energy-storage performances of supercapacitors are critically examined.In particular,the chemical aspects of various Cv2 conversion reactions are highlighted to establish a detailed understanding for the science and technology involved in the microstructural evolution,surface engineering and porosity control of CO_(2)-converted carbon nanostructures.Finally,the prospects and challenges associated with the industrialization of CO_(2) conversion and their practical application in supercapacitors are also discussed.展开更多
We demonstrate a novel preparative strategy for the well-controlled MnCo_2O_(4.5)@MnO_2 hierarchical nanostructures.Bothδ-MnO_2 nanosheets andα-MnO_2 nanorods can uniformly decorate the surface of MnCo_2O_(4.5)nanow...We demonstrate a novel preparative strategy for the well-controlled MnCo_2O_(4.5)@MnO_2 hierarchical nanostructures.Bothδ-MnO_2 nanosheets andα-MnO_2 nanorods can uniformly decorate the surface of MnCo_2O_(4.5)nanowires to form core-shell heterostructures.Detailed electrochemical characterization reveals that MnCo_2O_(4.5)@δ-MnO_2 pattern exhibits not only high specific capacitance of 357.5 F g^(-1)at a scan rate of 0.5 A g^(-1),but also good cycle stability(97%capacitance retention after 1000 cycles at a scan rate of 5 A g^(-1)),which make it have a promising application as a supercapacitor electrode material.展开更多
Antibacterial activity of ZnO-CeO2 solid nano-powders was studied by measuring the change of sterilization efficacy to the bacterial. ZnO-CeO2 nano-powders were prepared by laser vapor condensation (LVC) with oxygen a...Antibacterial activity of ZnO-CeO2 solid nano-powders was studied by measuring the change of sterilization efficacy to the bacterial. ZnO-CeO2 nano-powders were prepared by laser vapor condensation (LVC) with oxygen as loading gas. The size of the particle can be affected greatly by some reacting conditions such as the flow of loading gas and the reacting pressure. Rod-like powders with different molar ratios (Zn/Ce) and sizes were produced in the changed reacting conditions for studying the effects of sterilization efficacy to the bacterial. It is found that antibacterial activity of oxide powders increase with decreasing particle size and increasing ceria concentration. The changes of antibacterial action for S. aureus are similar to those for B.niger. Both the preparing mechanism of LVC and the sterilization assumption were proposed.展开更多
The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based ...The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based on nanostructured Ni_3S_2/Ni foam@RGO(NSNR) composite anode is developed, utilizing graphite as cathode material and LiPF6-VC-based solvent as electrolyte. The battery operates at high working voltage of 4.2–4.5 V, with superior discharge capacity of ～90 m A h g^(-1) at 100 mA g^(-1), outstanding rate performance, and long-term cycling stability over 500 cycles with discharge capacity retention of ～85.6%. Moreover, the composite simultaneously acts as the anode material and the current collector, and the corrosion phenomenon can be greatly reduced compared to metallic Al anode. Thus, this work represents a significant step forward for practical safe, low-cost and high working voltage dual-ion batteries,showing attractive potential for future energy storage application.展开更多
Well-crystalline CeO2 nanostructures with the morphology of nanorods and nanocubes were synthesized by a template-free hydro-thermal method. X-ray diffraction （XRD）, transmission electron microscopy （TEM）, Brunaue...Well-crystalline CeO2 nanostructures with the morphology of nanorods and nanocubes were synthesized by a template-free hydro-thermal method. X-ray diffraction （XRD）, transmission electron microscopy （TEM）, Brunauer-Emmett-Teller （BET） nitrogen adsorp-tion-desorption measurements were employed to characterize the synthesized materials. The reducibility and catalytic activity of nanostruc-tured CeO2 were examined by hydrogen temperature-programmed reduction （H2-TPR） and CO oxidation. The results showed that CeO2 nanorods could be converted into CeO2 nanocubes with the increasing of the reaction time and the hydrothermal temperature, CeO2 nanorods became longer gradually with the increasing of the concentrations of NaOH. H2-TPR characterization demonstrated that the intense low-temperature reduction peak in the CeO2 nanorods indicated the amount of hydrogen consumed is larger than CeO2 nanocubes. Meantime the CeO2 nanorods enhanced catalytic activity for CO oxidation, the total conversion temperature was 340 oC. The reasons were that CeO2 nanorods have much smaller crystalline sizes and higher surface areas than CeO2 nanocubes.展开更多
基金the Deanship of Scientific Research, Najran University, Najran, Kingdom of Saudi Arabia for all financial support
文摘ZnO-CeO2 nanostructures were synthesized by simple and effcient low temperature method. The structure and morphology of the ZnO-CeO2 nanostructures were characterized by X-ray powder diffraction （XRD） and field emission scanning electron microscopy （FESEM）, which revealed elongated shaped CeO2 nanoparticles with diameters of 40–90 nm distributed on the surface of elongated ZnO nanostructures with diameters of 50–200 nm （edge–centre）. Further the structure of the synthesized ZnO-CeO2 nanostructure was supported by Raman spectra and Fourier transform infrared spectroscopy （FTIR）. UV-vis absorption spectrum was used to confirm the optical properties of the CeO2 doped ZnO nanostructures. Photo-catalytic activity of CeO2 doped ZnO nanostructure was evaluated by degradation of acridine orange and methylene blue which degraded 84.55% and 48.65% in 170 min, respectively. ZnO-CeO2 nanostructures also showed good sensitivity （0.8331 μA·cm-2·（mol/l）-1） in short response time （10 s） by applying to chemical sensing using ethanol as a target compound by I-V technique. These degradation and chemical sensing properties of ZnO-CeO2 nanostructures are of great importance for the application of ZnO-CeO2 system as a photo-catalyst and chemical sensor.
基金supported by the National Natural Science Foundation of China(No.10574122 and No.60376008).
文摘TiO2 nanostructures were fabricated by a reaction of Ti foils in H2O2 solution at mild temperature, Porous TiO2 nanostructurcs, well adhered to Ti foil surfaces, were formed at 80 ℃ in 10 rain, and then flower- like and rod nanostructures formed in succession after a longer reaction time. Samples prepared at 80 ℃ for 4 h arc amorphous, and anatase-dominated crystal phase emerged in the sample prepared for as long as 10 h. Almost pure anatase phase were obtained in TiO2 nanostructures by annealing the samples at a temperature of 300 ℃. Photoeatalysis of the TiO2 nanostructures was characterized by the degradation of RhB dye molecules in an aqueous solution exposed to ultraviolet light. Results show a 7 cm^2 annealed TiO2 flower-like nanostrueture having the degradation rate of RhB as fast as 29.8 times that of the dye solution exposed to ultraviolet light alone.
基金the National Natural Science Foundation of China(No.51471182)this work is also supported by Shanghai international science and Technology Cooperation Fund(No.17520711700)the National Key Research and Development Project(No.2017YFB0310600).
文摘The current COVID-19 pandemic urges the extremely sensitive and prompt detection of SARS-CoV-2 virus.Here,we present a Human Angiotensin-converting-enzyme 2(ACE2)-functionalized gold“virus traps”nanostructure as an extremely sensitive SERS biosensor,to selectively capture and rapidly detect S-protein expressed coronavirus,such as the current SARS-CoV-2 in the contaminated water,down to the single-virus level.Such a SERS sensor features extraordinary 106-fold virus enrichment originating from high-affinity of ACE2 with S protein as well as“virus-traps”composed of oblique gold nanoneedles,and 109-fold enhancement of Raman signals originating from multi-component SERS effects.Furthermore,the identification standard of virus signals is established by machine-learning and identification techniques,resulting in an especially low detection limit of 80 copies mL^(−1) for the simulated contaminated water by SARS-CoV-2 virus with complex circumstance as short as 5 min,which is of great significance for achieving real-time monitoring and early warning of coronavirus.Moreover,here-developed method can be used to establish the identification standard for future unknown coronavirus,and immediately enable extremely sensitive and rapid detection of novel virus.
基金financial supports of the National Natural Science Foundation of China (No. 41476059)the Natural Science Foundation of Hebei Province (No. E2018108011)
文摘PANI copolymer micro/nanostructures with different surface wettability were obtained from the chemical oxidation copolymerization of aniline(Ani)with 2-ethyl aniline(EA)at diverse[EA]/[Ani+EA]molar ratios,by employing ammonium persulfate as an oxidant.The results revealed that the poly(aniline-co-2-ethyl aniline)(PANI-EA)copolymer micro/nanostructures exhibited satisfactory anticorrosion performance for carbon steel,and the corrosion protection efficiency increased with the increase of water repellent property.Poly(2-ethyl aniline)(PEA)showed the largest contact angle(CA=145°)and show the best corrosion protection for the carbon steel(h=87.29%).It is found that the superior anticorrosion property of PEA is attributed to its high hydrophobicity,low conductivity and low porosity.
基金support from the National Natural Science Foundation of China(Grant Nos.50972107 and 51272059)the Key Scientific and Technological Innovation Teams of Zhejiang Province,China(No. 2009R50010)+1 种基金the Natural Science Foundation of Liaoning Province,China(No.201202087)Program of Science and Technology Project of Wenzhou,China(No.G20110012)
文摘Flower-like Cu2SnS3 nanostructures composed of nano-flakes were successfully synthesized by solvothermal technique at 180 ℃ for 16 h. In the preparation process, CuCl2·H2O, SnCl2·2H2O and thiourea were used as raw materials, and ethylene glycol were used as solvent. The results showed that the obtained product was pure phase Cu2SnS3. The average diameter of Cu2SnS3 flowers and the thickness of the nano-flakes were about 1-1.5 μm and 10 nm, respectively. The influence of reaction time and solvents on the morphology, size and structure of the products was investigated by powder X-ray diffraction and field-emission scan electron microscopy （FESEM）. The ultraviolet-visible absorption spectrum measurement indicated that the band gap of the sample was about 1.26 eV and could be applied to the absorbing layer of thin solar cell. The possible formation mechanism of flower-like Cu2SnS3 was also proposed and discussed.
基金Project supported by the National Natural Science Foundation of China(21271062)。
文摘In this study,hierarchical Ag/La2 O2 CO3 micro/nanostructures(MNSs)were synthesized by in situ loading Ag nanoparticles(NPs)on the surface of the La2 O2 CO3 MNSs.The prepared La2 O2 CO3 MNSs present flower-like shape and can be tuned by the molar ratio of La(NO3)3 and CO(NH2)2.In the molar ratio of 1:2 to 1:55,the La2 O2 CO3 MNSs mainly consist of polyhedral rods,irregular rods and irregular spindles and their size is about 10,8 and 7μm,respectively.After loading Ag NPs,the spindle-like Ag/La2 O2 CO3 MNSs were used for phosphate removal and antibacterial activity.At the initial phosphate concentration of20 mg/L,the removal rate is 59.6%.The Ag/La2 O2 CO3 MNSs have significant antibacterial activity and their MIC values for S.aureus and E.coli are 31.3 and 15.6μg/mL,respectively.The results indicate that Ag/La2 O2 CO3 MNSs may have good application prospects in open water to inhibit bacterial growth.
基金the support of the Ministry of Higher Education, Saudi Arabia, for this research under the grant funded to promising Centre for Sensors and Electronic Devices (PCSED) at Najran University, Saudi Arabia
文摘Well crystalline gadolinium oxide（Gd2O3） nanostructures were grown by annealing the hydrothermally as-prepared nanostructures without using any template. Microscopic studies of Gd2O3 nanostructures were recorded along the [111] direction due to the clearly resolved interplanar distance d（222）-0.31 nm of the cubic crystal structure Gd2O3. Sensing mechanism of Gd2O3 as efficient electron mediator for the detection of ethanol was explored. As-fabricated sensor demonstrated the high-sensitivity of -0.266 μAm/M/cm2 with low detection limit（-52.2 μmol/L） and correlation coefficient（r^2, 0.618）. To the best of our knowledge, this was the first report for the detection of ethanol using as-grown（at 1000 oC） Gd2O3 nanostructures by simple and reliable Ⅰ-Ⅴ technique and rapid assessment of the reaction kinetics（in the order of seconds）. The low cost of the starting reagents and the simplicity of the synthetic route made it a promising chemical sensor for the detection of various toxic analytes, which are not environmentally safe.
基金supported by National Natural Science Foundation of China(NSFC,Grant No.51972178)Natural Science Foundation of Ningbo(2022J139)Ningbo Yongjiang Talent Introduction Programme(2022A-227-G)
文摘Crystallineγ-Ga_(2)O_(3)@rGO core-shell nanostructures are synthesized in gram scale,which are accomplished by a facile sonochemical strategy under ambient condition.They are composed of uniformγ-Ga_(2)O_(3)nanospheres encapsulated by reduced graphene oxide(rGO)nanolayers,and their formation is mainly attributed to the existed opposite zeta potential between the Ga_(2)O_(3)and rGO.The as-constructed lithium-ion batteries(LIBs)based on as-fabricatedγ-Ga_(2)O_(3)@rGO nanostructures deliver an initial discharge capacity of 1000 mAh g^(-1)at 100 mA g^(-1)and reversible capacity of 600 mAh g^(-1)under 500 mA g^(-1)after 1000 cycles,respectively,which are remarkably higher than those of pristineγ-Ga_(2)O_(3)with a much reduced lifetime of 100 cycles and much lower capacity.Ex situ XRD and XPS analyses demonstrate that the reversible LIBs storage is dominant by a conversion reaction and alloying mechanism,where the discharged product of liquid metal Ga exhibits self-healing ability,thus preventing the destroy of electrodes.Additionally,the rGO shell could act robustly as conductive network of the electrode for significantly improved conductivity,endowing the efficient Li storage behaviors.This work might provide some insight on mass production of advanced electrode materials under mild condition for energy storage and conversion applications.
文摘Titanium dioxide （TiO2） nanosheet, nanorod and nanotubes are synthesized using chemical vapor deposition （CVD） and anodizing processes. TiO2 nanosheets are grown on Ti foil which is coated with Au catalyst in CVD, TiO2 nanorods are synthesized on treated Ti foil with HCl by CVD, and TiO2 nanotubes are prepared by the three-step anodization method. Scanning electron microscopy shows the final TiO2 structures prepared using three processes with three different morphologies of nanosheet, nanorod and nanotube. X-ray diffraction verifies the presence of TiO2. TiO2 sheets and rods are crystalized in rutile phase, and TiO2 tubes after annealing turn into the anatase crystal phase. The optical investigations carried out by diffuse reflection spectroscopy reveal that the morphology of TiO2 nanostructures influencing their optical response and band gap energy of TiO2 is changed for different TiO2 nanostructures.
基金Project supported by the Deanship of Scientific Research at King Khalid University(Grant No.R.G.P1/207/41)the Deanship of Scientific Research at Princess Nourah bint Abdulrahman University through the Fast-track Research Funding Program,and Deanship of Research,University of Hail.
文摘This work reports the cost-effective growth of Mg:PbI2 nanostructures with 0,1,2.5 and 5.0 wt.%Mg doping concentrations.Structural,vibrational,morphological properties are analyzed using x-ray diffraction(XRD),Raman spectroscopy and scanning electron microscopy(SEM).XRD and Raman studies confirm the monophasic hexagonal system of Mg:PbI2,and no additional impurity peaks are detected.The Scherrer formula is used to determine sizes of crystallites to be in the range of 47-52 nm.EDX/SEM e-mapping analyses confirm the incorporation of Mg in PbI2 matrix and its uniform distribution throughout the sample.The hexagonal nanosheet-and nanoplate-like morphologies are detected in SEM images for pure and Mg-doped PbI2.An optical band gap of nanostructures is obtained from Tauc’s relation to be in the range 3.0-3.25 eV.Dielectric and electrical properties are found in significant enhancement as Mg doping in PbI2 matrix,also the conduction mechanism is discussed.
文摘The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and tribological properties of the composite coatings were researched. The results show that the composite coatings mainly consist of γ-Ni, α-Al2O3, γ-Al2O3 and rutile-TiO2 etc, and exhibit lower friction coefficients and wear losses than the Ni-based alloy coatings at different loads and speeds. The composite coating bears low contact stress at 3 N and its wear mechanism is micro-cutting wear. As loads increase to 6-12 N, the contact stress is higher than the elastic limit stress of worn surface, and the wear mechanisms change into multi-plastic deformation wear, micro-brittle fracture wear and abrasive wear. With the increase of speeds, the contact temperature of worn surface increases. The composite coating experiences multi-plastic deformation wear, fatigue wear and adhesive wear.
基金supported by the National Natural Science Foundation of China (No. 20907022,21003094)the Doctoral Program of Higher Education of China(No. 200800551003,20100032120066)the Special Projects of Environmental Protection (No. 2009ZX07526,2009ZX07208,200909101,2009GJA10021)
文摘Cerium-doped SiO2/TiO2 nanostructured fibers were fabricated by electrospinning technology. The prepared fibers were characterized by thermogravimetric analysis （TGA）, scanning electron microscopy （SEM）, X-ray diffraction （XRD） and Fourier transform infrared spectroscopy （FT-IR）. Using the fibers as catalysts, photoeatalytic degradation of Methylene Blue （MB） aqueous solution was carded out under simulated sunlight. The 0.2% Ce doping proved to be the optimal concentration for the doping of TiO2/SiO2, compared to other Ce-doped molar concentrations. The 0.2% Ce-doped SiOdTiO2 fibers exhibited higher photocatalytic activity than industrial Degussa P25 and the samples doped with only Ce or SIO2. The reasons for improving the photocatalytic activity were also discussed. Several operational parameters were studied, which showed that the photocatalytic efficiency of MB was influenced by parameters such as the initial dye concentration, the initial pH, inorganic anions, and so on. In addition, the influences of an electron acceptor and a radical scavenger suggested that OH was the dominant photooxidant during the photocatalytic process. The reuse evaluation of the fibers indicated that their photocatalytic activity had good stability.
基金the Nationnal Natural Science Foundation of China (No. 50342016).
文摘Iron（Ⅲ）-doped nanostructure TiO2-coated SiO2 （TiO2/SiO2） particles were prepared using the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized employing the sol-gel method with TiChas a precursor. The samples were characterized by Fourier transform infrared spectroscopy （FTIR）, SEM, EDS, XPS, and XRD. The experimental results show that TiO2 nanopowders on the surface of SiO2 particles are well distributed, the amount of TiO2 is increased with the adding of coating layers, the pure anatase-TiO2 coating layers are synthesized at 500℃, and the photocatalytic activity of Fe^3＋-doped TiO2/SiO2 is higher than that of undoped TiO2/SiO2.
基金financially supported by the National Natural Science Foundation of China(No.51907193 and No.51677182)the Dalian National Laboratory(DNL)for Clean Energy Cooperation Fund,CAS(No.DNL201915 and No.DNL201912)+2 种基金the Beijing Municipal Science and Technology Commission(No.Z181100000118006)the Key Research Program of Frontier Sciences,CAS(No.ZDBS-LY-JSC047)the Youth Innovation Promotion Association,CAS(No.2020000022)。
文摘The burgeoning global economy during the past decades gives rise to the continuous increase in fossil fuels consumption and rapid growth of CO_(2) emission,which demands an urgent exploration into green and sustainable devices for energy storage and power management.Supercapacitors based on activated carbon electrodes are promising systems for highly efficient energy harvesting and power supply,but their promotion is hindered by the moderate energy density compared with batteries.Therefore,scalable conversion of CO_(2) into novel carbon nanostructures offers a powerful alternative to tackle both issues:mitigating the greenhouse effect caused by redundant atmospheric CO_(2) and providing carbon materials with enhanced electrochemical performances.In this tutorial review,the techniques,opportunities and barriers in the design and fabrication of advanced carbon materials using CO_(2) as feedstock as well as their impact on the energy-storage performances of supercapacitors are critically examined.In particular,the chemical aspects of various Cv2 conversion reactions are highlighted to establish a detailed understanding for the science and technology involved in the microstructural evolution,surface engineering and porosity control of CO_(2)-converted carbon nanostructures.Finally,the prospects and challenges associated with the industrialization of CO_(2) conversion and their practical application in supercapacitors are also discussed.
基金financial supports provided by National Natural Science Foundation of China(Grant no.51104194 and 51104121)International S&T Cooperation Projects of Chongqing(CSTC 2013 gjhz90001)+1 种基金National Key laboratory of Fundamental Science of Micro/Nano-device and System Technology(2013MS06,Chongqing University)State Education Ministry and Fundamental Research Funds for the Central Universities(Project no.CDJZR14135501 and CDJZR13130036,Chongqing University,PR China)
文摘We demonstrate a novel preparative strategy for the well-controlled MnCo_2O_(4.5)@MnO_2 hierarchical nanostructures.Bothδ-MnO_2 nanosheets andα-MnO_2 nanorods can uniformly decorate the surface of MnCo_2O_(4.5)nanowires to form core-shell heterostructures.Detailed electrochemical characterization reveals that MnCo_2O_(4.5)@δ-MnO_2 pattern exhibits not only high specific capacitance of 357.5 F g^(-1)at a scan rate of 0.5 A g^(-1),but also good cycle stability(97%capacitance retention after 1000 cycles at a scan rate of 5 A g^(-1)),which make it have a promising application as a supercapacitor electrode material.
文摘Antibacterial activity of ZnO-CeO2 solid nano-powders was studied by measuring the change of sterilization efficacy to the bacterial. ZnO-CeO2 nano-powders were prepared by laser vapor condensation (LVC) with oxygen as loading gas. The size of the particle can be affected greatly by some reacting conditions such as the flow of loading gas and the reacting pressure. Rod-like powders with different molar ratios (Zn/Ce) and sizes were produced in the changed reacting conditions for studying the effects of sterilization efficacy to the bacterial. It is found that antibacterial activity of oxide powders increase with decreasing particle size and increasing ceria concentration. The changes of antibacterial action for S. aureus are similar to those for B.niger. Both the preparing mechanism of LVC and the sterilization assumption were proposed.
基金supported by the National Natural Science Foundation of China (No. 51725401)the Fundamental Research Funds for the Central Universities (FRF-TP-15-002C1 and FRF-TP17-002C2)
文摘The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based on nanostructured Ni_3S_2/Ni foam@RGO(NSNR) composite anode is developed, utilizing graphite as cathode material and LiPF6-VC-based solvent as electrolyte. The battery operates at high working voltage of 4.2–4.5 V, with superior discharge capacity of ～90 m A h g^(-1) at 100 mA g^(-1), outstanding rate performance, and long-term cycling stability over 500 cycles with discharge capacity retention of ～85.6%. Moreover, the composite simultaneously acts as the anode material and the current collector, and the corrosion phenomenon can be greatly reduced compared to metallic Al anode. Thus, this work represents a significant step forward for practical safe, low-cost and high working voltage dual-ion batteries,showing attractive potential for future energy storage application.
基金Project supported by National Natural Science Foundation of China (20603016)the National Key Basic Research and Development Program (973 program,2009CB220010)+1 种基金the Scientific Research Fund of Liaoning Provincial Education Department (L2010222)Liaoning Provincial Science & Technology Project of China (20071074) for financial support of this research
文摘Well-crystalline CeO2 nanostructures with the morphology of nanorods and nanocubes were synthesized by a template-free hydro-thermal method. X-ray diffraction （XRD）, transmission electron microscopy （TEM）, Brunauer-Emmett-Teller （BET） nitrogen adsorp-tion-desorption measurements were employed to characterize the synthesized materials. The reducibility and catalytic activity of nanostruc-tured CeO2 were examined by hydrogen temperature-programmed reduction （H2-TPR） and CO oxidation. The results showed that CeO2 nanorods could be converted into CeO2 nanocubes with the increasing of the reaction time and the hydrothermal temperature, CeO2 nanorods became longer gradually with the increasing of the concentrations of NaOH. H2-TPR characterization demonstrated that the intense low-temperature reduction peak in the CeO2 nanorods indicated the amount of hydrogen consumed is larger than CeO2 nanocubes. Meantime the CeO2 nanorods enhanced catalytic activity for CO oxidation, the total conversion temperature was 340 oC. The reasons were that CeO2 nanorods have much smaller crystalline sizes and higher surface areas than CeO2 nanocubes.
