While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfa...While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.展开更多
Photocatalysis is an important technology for using solar energy to produce hydrogen,convert CO_(2) to synthetic fuels,and decrease persistent pollutant.However,conventional photocatalysts have limitations,including p...Photocatalysis is an important technology for using solar energy to produce hydrogen,convert CO_(2) to synthetic fuels,and decrease persistent pollutant.However,conventional photocatalysts have limitations,including poor spectral absorption,inefficient charge separation,and structural instability under operational stress,which demand innovative durable materials with tailored electronic properties.Nanodiamond(ND)has recently been recognized as a suitable material because of its exceptional chemical stability,superior charge carrier mobility,and possible surface functionalization.While its intrinsic wide bandgap limits its response to visible-light,different methods have been demonstrated to activate its catalytic potential.Here,several emerging strategies for improving the catalytic performance of ND-based photocatalytic systems are summarized,including surface functionalization,plasmonic hybridization,heteroatom doping,and heterostructure design.And the structure-activity relationship and design principle are proposed to improve the light harvesting,charge transport,and redox kinetics for constructing high efficiency ND-based photocatalysts used in the renewable energy and environmental industries.展开更多
The aim of this study is to design,build,and evaluate an indirect forced convection solar dryer adapted to semi-arid climate,such as that of Bechar situated in the west south region of Algeria.The tested drying system...The aim of this study is to design,build,and evaluate an indirect forced convection solar dryer adapted to semi-arid climate,such as that of Bechar situated in the west south region of Algeria.The tested drying system consists of a flat-plate solar collector,an insulated two-chamber drying unit,and an Arduino-controlled device that ensures uniformtemperature distribution and real-timemonitoring using DHT22 sensors.Drying testswere conducted on locally grown beet slices at air temperatures of 45℃,60℃,and 80℃,with a constant air velocity of 1.2 m/s and a mass flow rate of 0.0027 kg/s.The collector reached a maximum temperature of 65℃,with thermal efficiencies ranging from 20%to 35%.In these conditions,the drying times were cut down to 200–300 min,and the beet’s moisture content dropped to 0.47,0.27,and 0.24 g/g dry matter,respectively.The experimental data were fitted to several empirical models,including the logarithmic model.The modelled results showed strong agreement with the experimental ones(correlation coefficients r=0.9919–0.9989;standard errors SE=0.017–0.043;root-mean-square errors RMSE=0.016–0.027).The results demonstrate that the system operates efficiently and consistently,making it suitable for the sustainable drying of agricultural and medicinal products in arid climates.展开更多
Crystalline silicon(c-Si)solar cells,though dominating the photovoltaic market,are nearing their theoretical power conversion efficiencies(PCE)limit of 29.4%,necessitating the adoption of multi-junction technology to ...Crystalline silicon(c-Si)solar cells,though dominating the photovoltaic market,are nearing their theoretical power conversion efficiencies(PCE)limit of 29.4%,necessitating the adoption of multi-junction technology to achieve higher performance.Among these,perovskiteon-silicon-based multi-junction solar cells have emerged as a promising alternative,where the perovskite offering tunable bandgaps,superior optoelectronic properties,and cost-effective manufacturing.Recent announced double-junction solar cells(PSDJSCs)have achieved the PCE of 34.85%,surpassing all other double-junction technologies.Encouragingly,the rapid advancements in PSDJSCs have spurred increased research interest in perovskite/perovskite/silicon triple-junction solar cells(PSTJSCs)in 2024.This triple-junction solar cell configuration demonstrates immense potential due to their optimum balance between achieving a high PCE limit and managing device complexity.This review provides a comprehensive analysis of PSTJSCs,covering fundamental principles,and technological milestones.Current challenges,including current mismatch,open-circuit voltage deficits,phase segregation,and stability issues,and their corresponding strategies are also discussed,alongside future directions to achieve long-term stability and high PCE.This work aims to advance the understanding of the development in PSTJSCs,paving the way for their practical implementation.展开更多
The self-assembled monolayer(SAM),functioning as a hole transport layer,holds the potential to substantially elevate the efficiency of perovskite and organic solar cells.Nevertheless,incomplete SAM coverage may result...The self-assembled monolayer(SAM),functioning as a hole transport layer,holds the potential to substantially elevate the efficiency of perovskite and organic solar cells.Nevertheless,incomplete SAM coverage may result in interface defects lurking between the photovoltaic layer and the electrode,thereby causing non-radiative recombination losses of interfacial charges.To tackle this issue,we introduced 4-bromobutyric acid to co-assemble with the SAM,yielding a more compact co-assembled monolayer(co-SAM)that effectively repairs these defective zones.Confocal laser scanning microscopy and Kelvin Probe Force Microscopy show that co-SAMs successfully mitigate interface defects in the previously uncovered electrode regions.Furthermore,the work function of the electrodes is elevated to 5.6 eV,facilitating efficient hole extraction.Consequently,devices incorporating co-SAMs exhibit notably reduced non-radiative recombination losses.The power conversion efficiency(PCE)of the devices is enhanced to 20.0% in binary organic solar cells,and an even more remarkable breakthrough PCE of 25.8% is achieved in perovskite/organic tandem devices.This study introduces a straightforward strategy to improve the hole-selective contact of electrodes,ultimately boosting the overall efficiency of the devices.展开更多
Recent progress in inverted perovskite solar cells(i PSCs)highlights the critical role of interface engineering between the charge transport layer and perovskite.Self-assembled monolayers(SAM)on transparent conductive...Recent progress in inverted perovskite solar cells(i PSCs)highlights the critical role of interface engineering between the charge transport layer and perovskite.Self-assembled monolayers(SAM)on transparent conductive oxide electrodes serve effectively as hole transport layers,though challenges such as energy mismatches and surface inhomogeneities remain.Here,a blended self-assembled monolayer of(2-(9H-carbazol-9-yl)ethyl)phosphonic acid(2PACz)and(4-(3,6-Dimethyl-9H-carbazol-9-yl)butyl)phosphonic acid(Me-4PACz)is developed,offering improved surface potential uniformity and interfacial energy alignment compared to individual SAMs.Interactions between the SAMs and ionic species are investigated with simulation analysis conducted,revealing the elimination of interfacial energy barriers through precise energy-level tuning.This strategy enables wide-bandgap(1.67 e V)perovskite solar cells with inverted structures with over 24%efficiency,an open-circuit voltage(V_(oc))of 1.268 V,and a certified fill factor(FF)of 86.8%,leading to a certified efficiency of 23.42%.The approach also enables high-efficiency semi-transparent devices and a mechanically stacked four-terminal perovskite/silicon tandem solar cell reaching 30.97%efficiency.展开更多
The solar cycle(SC),a phenomenon caused by the quasi-periodic regular activities in the Sun,occurs approximately every 11 years.Intense solar activity can disrupt the Earth’s ionosphere,affecting communication and na...The solar cycle(SC),a phenomenon caused by the quasi-periodic regular activities in the Sun,occurs approximately every 11 years.Intense solar activity can disrupt the Earth’s ionosphere,affecting communication and navigation systems.Consequently,accurately predicting the intensity of the SC holds great significance,but predicting the SC involves a long-term time series,and many existing time series forecasting methods have fallen short in terms of accuracy and efficiency.The Time-series Dense Encoder model is a deep learning solution tailored for long time series prediction.Based on a multi-layer perceptron structure,it outperforms the best previously existing models in accuracy,while being efficiently trainable on general datasets.We propose a method based on this model for SC forecasting.Using a trained model,we predict the test set from SC 19 to SC 25 with an average mean absolute percentage error of 32.02,root mean square error of 30.3,mean absolute error of 23.32,and R^(2)(coefficient of determination)of 0.76,outperforming other deep learning models in terms of accuracy and training efficiency on sunspot number datasets.Subsequently,we use it to predict the peaks of SC 25 and SC 26.For SC 25,the peak time has ended,but a stronger peak is predicted for SC 26,of 199.3,within a range of 170.8-221.9,projected to occur during April 2034.展开更多
With more and more IoT terminals being deployed in various power grid business scenarios,terminal reliability has become a practical challenge that threatens the current security protection architecture.Most IoT termi...With more and more IoT terminals being deployed in various power grid business scenarios,terminal reliability has become a practical challenge that threatens the current security protection architecture.Most IoT terminals have security risks and vulnerabilities,and limited resources make it impossible to deploy costly security protection methods on the terminal.In order to cope with these problems,this paper proposes a lightweight trust evaluation model TCL,which combines three network models,TCN,CNN,and LSTM,with stronger feature extraction capability and can score the reliability of the device by periodically analyzing the traffic behavior and activity logs generated by the terminal device,and the trust evaluation of the terminal’s continuous behavior can be achieved by combining the scores of different periods.After experiments,it is proved that TCL can effectively use the traffic behaviors and activity logs of terminal devices for trust evaluation and achieves F1-score of 95.763,94.456,99.923,and 99.195 on HDFS,BGL,N-BaIoT,and KDD99 datasets,respectively,and the size of TCL is only 91KB,which can achieve similar or better performance than CNN-LSTM,RobustLog and other methods with less computational resources and storage space.展开更多
All-inorganic lead-free perovskite solar cells have emerged as environmentally benign candidates;however,their device performance is still constrained by pronounced carrier recombination losses in the bulk and at inte...All-inorganic lead-free perovskite solar cells have emerged as environmentally benign candidates;however,their device performance is still constrained by pronounced carrier recombination losses in the bulk and at interfaces.By combining energy band alignment analysis with detailed modeling of recombination mechanisms,a systematic strategy for optimizing hole transport layers is developed.The results reveal that a negative valence band offset produces a cliff-like interface,which facilitates hole extraction while also accounting for the observed variations in open-circuit voltage.Furthermore,short-circuit current losses are quantitatively attributed to different recombination pathways,modeled by incorporating radiative,Shockley–Read–Hall,Auger,and interface recombination processes.This comprehensive approach not only clarifies the correlation between energy level alignment and recombination dynamics but also highlights the competing roles of band offset and interface defects in determining device performance.The optimized device architecture,based on Ge-based lead-free perovskites,achieves a power conversion efficiency of 25.1%,with an open-circuit voltage of 1.29 V,a short-circuit current density of 22.5 mA·cm^(-2),and a fill factor of 86.3%.These findings provide theoretical guidance for designing stable,high-performance,and environmentally friendly lead-free perovskite solar cells.展开更多
Two-dimensional MXene Ti_(3)C_(2)T_(x)demonstrates great promise in perovskite solar cells(PSCs).Herein,sulfur-terminated Ti_(3)C_(2)T_(x)(S-Ti_(3)C_(2)T_(x))is developed by modifying Ti_(3)C_(2)T_(x)via a facile hydr...Two-dimensional MXene Ti_(3)C_(2)T_(x)demonstrates great promise in perovskite solar cells(PSCs).Herein,sulfur-terminated Ti_(3)C_(2)T_(x)(S-Ti_(3)C_(2)T_(x))is developed by modifying Ti_(3)C_(2)T_(x)via a facile hydrothermal method using thioacetamide.As a perovskite additive,S-Ti_(3)C_(2)T_(x)outperforms pristine Ti_(3)C_(2)T_(x)by(1)significantly promoting grain growth,enhancing carrier mobility,and reducing defect density;(2)optimizing energy level alignment to lower interfacial energy barriers and minimize interface non-radiative recombination;(3)stabilizing uncoordinated Pb2+and[PbI6]4-octahedra via Pb-S bonds while alleviating bulk lattice strain,as this Pb-S interaction exerts a“tape-like”effect.Based on this synergistic mechanism,PSCs with S-Ti_(3)C_(2)T_(x)achieve a champion efficiency of 25.51%—outperforming control(23.46%)and pristine Ti_(3)C_(2)T_(x)-based devices(24.54%)—with enhanced stability.This work highlights terminal group engineering as a critical strategy for advancing high-performance PSCs and their potential for emerging photovoltaic technologies.展开更多
This study presents the design,construction,and thermal evaluation of a solar-powered cocoa roaster based on a Parabolic Cylinder Collector(PCC)with dual-axis solar tracking.The system integrates three functional subs...This study presents the design,construction,and thermal evaluation of a solar-powered cocoa roaster based on a Parabolic Cylinder Collector(PCC)with dual-axis solar tracking.The system integrates three functional subsystems:the cylindrical-parabolic reflecting surface,the stainless-steel absorber tube,and a microcontrollerbased tracking mechanism.The prototype enables continuous acquisition of key thermal variables(solar irradiance,ambient temperature,absorber surface temperature,and bean temperature),allowing a detailed characterization of heat transfer processes during roasting.Roasting experiments were conducted at controlled durations of 40,55,and 70 min between 10:00 and 14:00 h.Maximum roasting temperatures of 125℃–137℃ were reached under average irradiance levels of 685.7–930.5 W m−2.The lowest final moisture content was 2.19%,within the recommended range for high-quality cocoa.Longer roasting durations promoted thermal energy accumulation within the absorber tube,enhancing convective and radiative heat transfer to the bean mass even under fluctuating irradiance.The experimental trends reveal a strong coupling between irradiance variability,absorber temperature,and internal air-beam heat transfer.Comparison with reference parabolic trough collector studies indicate that,although the process-level roasting efficiency(3.83%–7.45%)is lower than conventional collector-level thermal efficiencies,the operating temperatures and moisture-reduction rates align with the thermal requirements of food-processing systems rather than high-enthalpy solar applications.These results also demonstrate the potential of coupling PCC-based solar concentration with lowtemperature convective–radiative roasting processes.Overall,the findings confirm the feasibility of implementing PCC-based roasting technologies in rural or off-grid regions,where solar-driven heat transfer offers a sustainable,low-cost alternative to fossil-fuel-based roasting systems,enabling a controlled thermophysical environment for cocoa transformation.展开更多
This paper presents an experimental analysis of a solar-assisted powered underfloor heating system,designed primarily to boost energy efficiency and achieve reliable desired steady-state temperature in buildings.We th...This paper presents an experimental analysis of a solar-assisted powered underfloor heating system,designed primarily to boost energy efficiency and achieve reliable desired steady-state temperature in buildings.We thoroughly tested the system’s thermal and operational features by subjecting it to three distinct scenarios that mimicked diverse solar irradiance and environmental conditions.Our findings reveal a strong correlation between variations in solar input and overall system performance.The Solar Fraction(SF),our key energy efficiency metric,varied significantly across the cases,ranging from 63.1%up to 88.7%.This high reliance on renewables resulted in a substantial reduction in backup power;consequently,the auxiliary electric heater was only required to supply between 1.82 and 3.00 kWh over the test periods.The circulation pump operated on a precise control logic,engaging below 20℃ and disengaging at 21℃.Crucially,the experiments verified the system’s ability not only tomeet the air temperature setpoint but also to ensure the floor surface temperature stayed within required international comfort criteria.These robust results directly support the study’s main objective.For practical application,we advise increasing the total length of the embedded pipe network.This crucial adjustment would allow for a reduction in the required circulating water temperature,which in turn maximizes the utilization of low-grade solar heat and optimizes radiant heat delivery toward achieving the desired steady-state temperature.Ultimately,the study confirms that solar-assisted underfloor heating offers a technically viable,sustainable,and energy-efficient solution with the potential to significantly cut fossil fuel consumption.展开更多
Although the certified power conversion efficiency(PCE)of single-junction perovskite solar cells(PSCs)has achieved a high level of 27%,approaching the single-crystalline silicon solar cells,the device stability remain...Although the certified power conversion efficiency(PCE)of single-junction perovskite solar cells(PSCs)has achieved a high level of 27%,approaching the single-crystalline silicon solar cells,the device stability remains an urgent issue to be resolved for the commercialization.Defect passivation emerged as a viable approach to enhance the operational stability of the solar devices.Herein,phenylthiourea(PhTu)derivatives are selected as effective passivation agents to enhance the optoelectronic properties of printed methylammonium lead iodide(MAPbI_(3))films.It is demonstrated that incorporating a small amount of 1-(4-carboxyphenyl)-2-thiourea(PhTu-COOH)significantly reduces the trap-state density and leads to longer carrier lifetime of the perovskite films.As a result,the inverted solar device made of Ph Tu-COOH-modified MAPbI_(3) perovskite film shows remarkably improved efficiency(from 17.29%to 20.22%)and obviously increased open-circuit voltage(V_(OC))(from 1.043 to 1.143 V),as compared with the pristine device.Moreover,the Ph Tu-COOH-modified PSCs exhibit enhanced operational stability due to the significantly reduced trap-state density.Finally,the optimized solar module fabricated with an active area of 11.28 cm^(2) delivers a high PCE of 17.07%with negligible V_(OC)loss,demonstrating the feasibility of the blade-coating method for large-area perovskite film deposition.展开更多
Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge reco...Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge recombination,ion migration,and iodine oxidation.To address this,we propose a novel all-in-one modification strategy employing ammonia borane(BNH6)as a multifunctional complex.By incorporating BNH6 at both buried and upper interfaces simultaneously,we achieve dualinterfacial defect passivation and iodide oxidation suppression through three key mechanisms:(1)hydrolysis-induced interaction with SnO_(2),(2)coordination with Pb^(2+),and(3)inhibition of I−oxidation.This approach significantly enhances device performance,yielding a champion power conversion efficiency(PCE)of 26.43%(certified 25.98%).Furthermore,the unencapsulated device demonstrates prominent enhanced operation stability,maintaining 90%of its initial PCE after 500 h under continuous illumination.Notably,our strategy eliminates the need for separate interface treatments,streamlining fabrication and offering a scalable route toward high-performance perovskite photovoltaics.展开更多
Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization.Here,we introduce 2-iodoimid...Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization.Here,we introduce 2-iodoimidazole(IIZ)into the perovskite precursor,enabling the formation of an air-stable pureδ-phase intermediate,which,upon annealing,fully transforms into a highly orientedα-phase perovskite film with reduced defects and variability.Leveraging this approach,we achieve a stabilized power conversion efficiency of 20.9%for 927.5 cm^(2)perovskite solar modules with high reproducibility.The encapsulated modules meet stringent international photovoltaic testing standards(IEC61215:2021),demonstrating excellent stability under continuous operation,thermal cycling(-40 to 85℃)and damp heat(85℃ and 85%relative humidity).展开更多
Surface passivation via two-dimensional(2D)perovskite has emerged as a promising strategy to enhance the performance of perovskite solar cells(PSCs)due to the effective compensation of interfacial states.However,the i...Surface passivation via two-dimensional(2D)perovskite has emerged as a promising strategy to enhance the performance of perovskite solar cells(PSCs)due to the effective compensation of interfacial states.However,the in situ grown 2D perovskite passivation layers typically comprise a mixture of multiple dimensionalities at the interface,where band alignment has only been portrayed qualitatively and empirically.Herein,the interface states for precisely phase-tailored 2D perovskite passivated PSCs are quantitatively investigated.In comparison to traditional passivation molecules,2D perovskite layers based on 4-trifluoromethyl-phenylethylammonium iodide(CF3PEAI)exhibit an increased work function,introducing desirable downward band bending to eliminate the Schottky Barrier.Furthermore,precisely phase-tailored 2D layers could modulate the interface trap density and energetics.The n=1 film delivers optimal performance with a hole extraction efficiency of 95.1%.The optimized n-i-p PSCs in the two-step method significantly improve PCE to 25.40%,along with enhanced photostability and negligible hysteresis.It highlights that tailoring in the composition and phase distribution of the 2D perovskite layer could modulate the interface states at the 2D/3D interface.展开更多
FAPbI3 has been extensively employed in high-performance perovskite solar cells(PSCs)owing to its optimal bandgap and outstanding optoelectronic properties.Nevertheless,it readily undergoes the formation of a photo-in...FAPbI3 has been extensively employed in high-performance perovskite solar cells(PSCs)owing to its optimal bandgap and outstanding optoelectronic properties.Nevertheless,it readily undergoes the formation of a photo-inactiveδ-phase during crystallization,and achieving high-qualityα-phase films becomes even more challenging in antisolvent-free fabrication processes.This study introduces a crystallization control strategy based on 2-dimethylaminopyridine(2-DMAP)ligand engineering to establish a“fast nucleation-slow growth”dual-time-domain crystallization mechanism.2-DMAP facilitates the formation of a functional intermediate phase(2-DMAP·PbI_(2)·DMSO)that enables a direct transformation to theα-FAPbI3 phase and effectively suppresses theδ-phase pathway.Theoretical calculations and systematic experimental characterizations demonstrate that 2-DMAP exhibits stronger binding affinity and a greater charge polarization effect than dimethylsulfoxide(DMSO).This promotes the formation of high-density nuclei during spin coating and delays excessive grain growth during annealing,leading to perovskite films with improved crystallinity,fewer defects,and longer carrier lifetimes.As a result,an antisolvent-free PSC device was successfully fabricated,achieving a power conversion efficiency(PCE)of 25.10%,one of the highest reported for antisolvent-free spin-coating systems.Under ISOS-L-1 standard conditions,the device retained 84.78%of its initial efficiency after 1500 h of continuous illumination,demonstrating excellent operational stability.Moreover,it exhibited remarkable long-term stability under harsh humid and thermal conditions.This work offers a valuable strategy for the large-scale fabrication of high-performance and antisolvent-free PSCs.展开更多
The crystallization and aggregation characteristics of the active layer components in organic solar cells(OSCs)are one of the core factors determining photovoltaic performance,influencing the entire process from light...The crystallization and aggregation characteristics of the active layer components in organic solar cells(OSCs)are one of the core factors determining photovoltaic performance,influencing the entire process from light absorption to charge separation,transport,and ultimately charge collection.Dynamic changes in crystallization and aggregation states can also disrupt the microstructure of the active layer,thus shortening the lifetime of the cell.In this study,a morphology modulation strategy is proposed to regulate the crystallization kinetics of non-fullerene acceptors by employing the polymer molecule PYIT as a nucleating agent.An appropriate amount of PYIT was first completely dissolved with the non-fullerene acceptor Y6 and left to stand for 24 h,followed by the fabrication of layer-by-layer processed OSCs.Experiments demonstrated that high crystallinity of PYIT allows it to act as a crystallization nucleus,promoting the crystallization,orientation consistency,and ordered stacking of the acceptor.These nanoscale structural optimizations facilitate efficient charge transport,enhance exciton dissociation efficiency,and suppress unfavorable energetic disorder.Consequently,not only was the power conversion efficiency(PCE)of D18-Cl/Y6-based layer-by-layer processed OSC increased from 18.08%to 19.13%,but the atmospheric stability and long-term lifetime of the OSCs were also significantly improved.Notably,this strategy is also applicable to indoor OSCs,and the PYIT-optimized device can achieve a PCE of 27.0%under 1000 lux light-emitting diode(LED,3200K)irradiation,which is superior to that of the control device(24.2%).This work develops a crystal engineering strategy that is able to simultaneously optimize the microscopic morphology and charge dynamics properties in OSCs,thereby achieving simultaneous improvement in efficiency and stability.展开更多
Although lead(Pb)-based perovskite solar cells(PSCs)have garnered intense attention for their remarkable photovoltaic conversion efficiency,their commercial process is urgently in need of an effective damage-evaluatio...Although lead(Pb)-based perovskite solar cells(PSCs)have garnered intense attention for their remarkable photovoltaic conversion efficiency,their commercial process is urgently in need of an effective damage-evaluation system for the early diagnosis of faulty PSCs.The main cause of microdamage in perovskite films is the outflow of Pb,which significantly impacts device performance.However,no reliable correlation has been established between classical damage detection techniques and Pb detection,resulting in limited detection sensitivity.Here,we report an in situ visual microdamage evaluation method of PSCs by coating the device surface with a silica gel encapsulation layer containing porphyrin molecules.This detection technology enables high selectivity and sensitivity based on the strong complexation between the porphyrin ring and trace Pb outflow from degraded PSCs.By establishing the linear relationship between the fluorescence intensity and Pb concentration in PSCs,trace Pb outflow is pinpointed and quantified with a low detection limit of 0.65μg cm^(-2).An applet is developed for the insitu visual fluorescence detection method to facilitate the continuous real-time monitoring of series-type PSCs,thereby enabling the prompt identification and replacement of damaged PSCs and ensuring the swift restoration of high efficiency.展开更多
The infrared channels of the FY-4B advanced geosynchronous radiation imagers(AGRI) play a crucial role in temperature and humidity analyses for mesoscale numerical weather prediction, particularly in enhancing the ini...The infrared channels of the FY-4B advanced geosynchronous radiation imagers(AGRI) play a crucial role in temperature and humidity analyses for mesoscale numerical weather prediction, particularly in enhancing the initial field quality and the forecasting accuracy of the model. This study assimilated FY-4B AGRI data into the CMA-MESO model and analyzed the bias characteristics and correction methods. Analysis of the AGRI data revealed a clear diurnal variation in the bias, which was positively correlated with the solar elevation angle. However, the diurnal variation in the bias lagged behind the solar elevation angle, likely owing to temperature changes and delayed instrument responses resulting from solar radiation. To address this issue, we propose a correction method that utilizes the solar elevation angle after an optimal time shift. Using the time-shifted solar elevation angle as a predictor effectively reduces the diurnal variation in bias and significantly improves the correction effect. This approach provides theoretical support for the assimilation of FY-4B AGRI data into mesoscale numerical weather predictions, thereby enhancing the reliability of the assimilation results.展开更多
基金supported by National Key Research and Development Program of China(2022YFB3804902,2022YFB3804900)the National Natural Science Foundation of China(52203226,52161145406,42376045)the Fundamental Research Funds for the Central Universities(2232024Y-01,2232025D-02).
文摘While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.
文摘Photocatalysis is an important technology for using solar energy to produce hydrogen,convert CO_(2) to synthetic fuels,and decrease persistent pollutant.However,conventional photocatalysts have limitations,including poor spectral absorption,inefficient charge separation,and structural instability under operational stress,which demand innovative durable materials with tailored electronic properties.Nanodiamond(ND)has recently been recognized as a suitable material because of its exceptional chemical stability,superior charge carrier mobility,and possible surface functionalization.While its intrinsic wide bandgap limits its response to visible-light,different methods have been demonstrated to activate its catalytic potential.Here,several emerging strategies for improving the catalytic performance of ND-based photocatalytic systems are summarized,including surface functionalization,plasmonic hybridization,heteroatom doping,and heterostructure design.And the structure-activity relationship and design principle are proposed to improve the light harvesting,charge transport,and redox kinetics for constructing high efficiency ND-based photocatalysts used in the renewable energy and environmental industries.
文摘The aim of this study is to design,build,and evaluate an indirect forced convection solar dryer adapted to semi-arid climate,such as that of Bechar situated in the west south region of Algeria.The tested drying system consists of a flat-plate solar collector,an insulated two-chamber drying unit,and an Arduino-controlled device that ensures uniformtemperature distribution and real-timemonitoring using DHT22 sensors.Drying testswere conducted on locally grown beet slices at air temperatures of 45℃,60℃,and 80℃,with a constant air velocity of 1.2 m/s and a mass flow rate of 0.0027 kg/s.The collector reached a maximum temperature of 65℃,with thermal efficiencies ranging from 20%to 35%.In these conditions,the drying times were cut down to 200–300 min,and the beet’s moisture content dropped to 0.47,0.27,and 0.24 g/g dry matter,respectively.The experimental data were fitted to several empirical models,including the logarithmic model.The modelled results showed strong agreement with the experimental ones(correlation coefficients r=0.9919–0.9989;standard errors SE=0.017–0.043;root-mean-square errors RMSE=0.016–0.027).The results demonstrate that the system operates efficiently and consistently,making it suitable for the sustainable drying of agricultural and medicinal products in arid climates.
基金supported by the National Natural Science Foundation of China under Grants 62404185the industry-academia joint laboratory collaboration between Hiking PV and Xiamen University(20243160C0010)J.Z.is supported by Nanqiang Outstanding Young Talents Program X2450215 of Xiamen University.
文摘Crystalline silicon(c-Si)solar cells,though dominating the photovoltaic market,are nearing their theoretical power conversion efficiencies(PCE)limit of 29.4%,necessitating the adoption of multi-junction technology to achieve higher performance.Among these,perovskiteon-silicon-based multi-junction solar cells have emerged as a promising alternative,where the perovskite offering tunable bandgaps,superior optoelectronic properties,and cost-effective manufacturing.Recent announced double-junction solar cells(PSDJSCs)have achieved the PCE of 34.85%,surpassing all other double-junction technologies.Encouragingly,the rapid advancements in PSDJSCs have spurred increased research interest in perovskite/perovskite/silicon triple-junction solar cells(PSTJSCs)in 2024.This triple-junction solar cell configuration demonstrates immense potential due to their optimum balance between achieving a high PCE limit and managing device complexity.This review provides a comprehensive analysis of PSTJSCs,covering fundamental principles,and technological milestones.Current challenges,including current mismatch,open-circuit voltage deficits,phase segregation,and stability issues,and their corresponding strategies are also discussed,alongside future directions to achieve long-term stability and high PCE.This work aims to advance the understanding of the development in PSTJSCs,paving the way for their practical implementation.
基金supported by the National Natural Science Foundation of China(52303239,51933001,22475114)the Natural Science Foundation of Shandong Province(ZR2022QB141,2023HWYQ-087)+1 种基金the Shanghai Pujiang Program(23PJ1409700)the Hubei Province Key Research Program(2023BAB109)。
文摘The self-assembled monolayer(SAM),functioning as a hole transport layer,holds the potential to substantially elevate the efficiency of perovskite and organic solar cells.Nevertheless,incomplete SAM coverage may result in interface defects lurking between the photovoltaic layer and the electrode,thereby causing non-radiative recombination losses of interfacial charges.To tackle this issue,we introduced 4-bromobutyric acid to co-assemble with the SAM,yielding a more compact co-assembled monolayer(co-SAM)that effectively repairs these defective zones.Confocal laser scanning microscopy and Kelvin Probe Force Microscopy show that co-SAMs successfully mitigate interface defects in the previously uncovered electrode regions.Furthermore,the work function of the electrodes is elevated to 5.6 eV,facilitating efficient hole extraction.Consequently,devices incorporating co-SAMs exhibit notably reduced non-radiative recombination losses.The power conversion efficiency(PCE)of the devices is enhanced to 20.0% in binary organic solar cells,and an even more remarkable breakthrough PCE of 25.8% is achieved in perovskite/organic tandem devices.This study introduces a straightforward strategy to improve the hole-selective contact of electrodes,ultimately boosting the overall efficiency of the devices.
文摘Recent progress in inverted perovskite solar cells(i PSCs)highlights the critical role of interface engineering between the charge transport layer and perovskite.Self-assembled monolayers(SAM)on transparent conductive oxide electrodes serve effectively as hole transport layers,though challenges such as energy mismatches and surface inhomogeneities remain.Here,a blended self-assembled monolayer of(2-(9H-carbazol-9-yl)ethyl)phosphonic acid(2PACz)and(4-(3,6-Dimethyl-9H-carbazol-9-yl)butyl)phosphonic acid(Me-4PACz)is developed,offering improved surface potential uniformity and interfacial energy alignment compared to individual SAMs.Interactions between the SAMs and ionic species are investigated with simulation analysis conducted,revealing the elimination of interfacial energy barriers through precise energy-level tuning.This strategy enables wide-bandgap(1.67 e V)perovskite solar cells with inverted structures with over 24%efficiency,an open-circuit voltage(V_(oc))of 1.268 V,and a certified fill factor(FF)of 86.8%,leading to a certified efficiency of 23.42%.The approach also enables high-efficiency semi-transparent devices and a mechanically stacked four-terminal perovskite/silicon tandem solar cell reaching 30.97%efficiency.
基金supported by the Academic Research Projects of Beijing Union University(ZK20202204)the National Natural Science Foundation of China(12250005,12073040,12273059,11973056,12003051,11573037,12073041,11427901,11572005,11611530679 and 12473052)+1 种基金the Strategic Priority Research Program of the China Academy of Sciences(XDB0560000,XDA15052200,XDB09040200,XDA15010700,XDB0560301,and XDA15320102)the Chinese Meridian Project(CMP).
文摘The solar cycle(SC),a phenomenon caused by the quasi-periodic regular activities in the Sun,occurs approximately every 11 years.Intense solar activity can disrupt the Earth’s ionosphere,affecting communication and navigation systems.Consequently,accurately predicting the intensity of the SC holds great significance,but predicting the SC involves a long-term time series,and many existing time series forecasting methods have fallen short in terms of accuracy and efficiency.The Time-series Dense Encoder model is a deep learning solution tailored for long time series prediction.Based on a multi-layer perceptron structure,it outperforms the best previously existing models in accuracy,while being efficiently trainable on general datasets.We propose a method based on this model for SC forecasting.Using a trained model,we predict the test set from SC 19 to SC 25 with an average mean absolute percentage error of 32.02,root mean square error of 30.3,mean absolute error of 23.32,and R^(2)(coefficient of determination)of 0.76,outperforming other deep learning models in terms of accuracy and training efficiency on sunspot number datasets.Subsequently,we use it to predict the peaks of SC 25 and SC 26.For SC 25,the peak time has ended,but a stronger peak is predicted for SC 26,of 199.3,within a range of 170.8-221.9,projected to occur during April 2034.
基金supported by National Key R&D Program of China(No.2022YFB3105101).
文摘With more and more IoT terminals being deployed in various power grid business scenarios,terminal reliability has become a practical challenge that threatens the current security protection architecture.Most IoT terminals have security risks and vulnerabilities,and limited resources make it impossible to deploy costly security protection methods on the terminal.In order to cope with these problems,this paper proposes a lightweight trust evaluation model TCL,which combines three network models,TCN,CNN,and LSTM,with stronger feature extraction capability and can score the reliability of the device by periodically analyzing the traffic behavior and activity logs generated by the terminal device,and the trust evaluation of the terminal’s continuous behavior can be achieved by combining the scores of different periods.After experiments,it is proved that TCL can effectively use the traffic behaviors and activity logs of terminal devices for trust evaluation and achieves F1-score of 95.763,94.456,99.923,and 99.195 on HDFS,BGL,N-BaIoT,and KDD99 datasets,respectively,and the size of TCL is only 91KB,which can achieve similar or better performance than CNN-LSTM,RobustLog and other methods with less computational resources and storage space.
基金supported by the National Natural Science Foundation of China(Grant Nos.52102165 and 62474056)the Natural Science Foundation of Nanjing University of Posts and Telecommunications(Grant Nos.NY221029 and NY222165)。
文摘All-inorganic lead-free perovskite solar cells have emerged as environmentally benign candidates;however,their device performance is still constrained by pronounced carrier recombination losses in the bulk and at interfaces.By combining energy band alignment analysis with detailed modeling of recombination mechanisms,a systematic strategy for optimizing hole transport layers is developed.The results reveal that a negative valence band offset produces a cliff-like interface,which facilitates hole extraction while also accounting for the observed variations in open-circuit voltage.Furthermore,short-circuit current losses are quantitatively attributed to different recombination pathways,modeled by incorporating radiative,Shockley–Read–Hall,Auger,and interface recombination processes.This comprehensive approach not only clarifies the correlation between energy level alignment and recombination dynamics but also highlights the competing roles of band offset and interface defects in determining device performance.The optimized device architecture,based on Ge-based lead-free perovskites,achieves a power conversion efficiency of 25.1%,with an open-circuit voltage of 1.29 V,a short-circuit current density of 22.5 mA·cm^(-2),and a fill factor of 86.3%.These findings provide theoretical guidance for designing stable,high-performance,and environmentally friendly lead-free perovskite solar cells.
基金supported by the National Natural Science Foundation of China(51872145 and 12004192)Natural Science Foundation of Nanjing University of Posts and Telecommunications(NY224170)。
文摘Two-dimensional MXene Ti_(3)C_(2)T_(x)demonstrates great promise in perovskite solar cells(PSCs).Herein,sulfur-terminated Ti_(3)C_(2)T_(x)(S-Ti_(3)C_(2)T_(x))is developed by modifying Ti_(3)C_(2)T_(x)via a facile hydrothermal method using thioacetamide.As a perovskite additive,S-Ti_(3)C_(2)T_(x)outperforms pristine Ti_(3)C_(2)T_(x)by(1)significantly promoting grain growth,enhancing carrier mobility,and reducing defect density;(2)optimizing energy level alignment to lower interfacial energy barriers and minimize interface non-radiative recombination;(3)stabilizing uncoordinated Pb2+and[PbI6]4-octahedra via Pb-S bonds while alleviating bulk lattice strain,as this Pb-S interaction exerts a“tape-like”effect.Based on this synergistic mechanism,PSCs with S-Ti_(3)C_(2)T_(x)achieve a champion efficiency of 25.51%—outperforming control(23.46%)and pristine Ti_(3)C_(2)T_(x)-based devices(24.54%)—with enhanced stability.This work highlights terminal group engineering as a critical strategy for advancing high-performance PSCs and their potential for emerging photovoltaic technologies.
基金the Program for Teaching Development(PRODEP)for funding the project UJAT-PTC-251(Development and Evaluation of a Cocoa Roaster in the Tabasco Region).
文摘This study presents the design,construction,and thermal evaluation of a solar-powered cocoa roaster based on a Parabolic Cylinder Collector(PCC)with dual-axis solar tracking.The system integrates three functional subsystems:the cylindrical-parabolic reflecting surface,the stainless-steel absorber tube,and a microcontrollerbased tracking mechanism.The prototype enables continuous acquisition of key thermal variables(solar irradiance,ambient temperature,absorber surface temperature,and bean temperature),allowing a detailed characterization of heat transfer processes during roasting.Roasting experiments were conducted at controlled durations of 40,55,and 70 min between 10:00 and 14:00 h.Maximum roasting temperatures of 125℃–137℃ were reached under average irradiance levels of 685.7–930.5 W m−2.The lowest final moisture content was 2.19%,within the recommended range for high-quality cocoa.Longer roasting durations promoted thermal energy accumulation within the absorber tube,enhancing convective and radiative heat transfer to the bean mass even under fluctuating irradiance.The experimental trends reveal a strong coupling between irradiance variability,absorber temperature,and internal air-beam heat transfer.Comparison with reference parabolic trough collector studies indicate that,although the process-level roasting efficiency(3.83%–7.45%)is lower than conventional collector-level thermal efficiencies,the operating temperatures and moisture-reduction rates align with the thermal requirements of food-processing systems rather than high-enthalpy solar applications.These results also demonstrate the potential of coupling PCC-based solar concentration with lowtemperature convective–radiative roasting processes.Overall,the findings confirm the feasibility of implementing PCC-based roasting technologies in rural or off-grid regions,where solar-driven heat transfer offers a sustainable,low-cost alternative to fossil-fuel-based roasting systems,enabling a controlled thermophysical environment for cocoa transformation.
文摘This paper presents an experimental analysis of a solar-assisted powered underfloor heating system,designed primarily to boost energy efficiency and achieve reliable desired steady-state temperature in buildings.We thoroughly tested the system’s thermal and operational features by subjecting it to three distinct scenarios that mimicked diverse solar irradiance and environmental conditions.Our findings reveal a strong correlation between variations in solar input and overall system performance.The Solar Fraction(SF),our key energy efficiency metric,varied significantly across the cases,ranging from 63.1%up to 88.7%.This high reliance on renewables resulted in a substantial reduction in backup power;consequently,the auxiliary electric heater was only required to supply between 1.82 and 3.00 kWh over the test periods.The circulation pump operated on a precise control logic,engaging below 20℃ and disengaging at 21℃.Crucially,the experiments verified the system’s ability not only tomeet the air temperature setpoint but also to ensure the floor surface temperature stayed within required international comfort criteria.These robust results directly support the study’s main objective.For practical application,we advise increasing the total length of the embedded pipe network.This crucial adjustment would allow for a reduction in the required circulating water temperature,which in turn maximizes the utilization of low-grade solar heat and optimizes radiant heat delivery toward achieving the desired steady-state temperature.Ultimately,the study confirms that solar-assisted underfloor heating offers a technically viable,sustainable,and energy-efficient solution with the potential to significantly cut fossil fuel consumption.
基金supported by the National Natural Science Foundation of China(Grant No.62205103)the Natural Science Foundation of Hunan Province(Grant No.2023JJ40216)the Elite Youth Program by the Department of Education of Hunan Province(Grant No.24B0663)。
文摘Although the certified power conversion efficiency(PCE)of single-junction perovskite solar cells(PSCs)has achieved a high level of 27%,approaching the single-crystalline silicon solar cells,the device stability remains an urgent issue to be resolved for the commercialization.Defect passivation emerged as a viable approach to enhance the operational stability of the solar devices.Herein,phenylthiourea(PhTu)derivatives are selected as effective passivation agents to enhance the optoelectronic properties of printed methylammonium lead iodide(MAPbI_(3))films.It is demonstrated that incorporating a small amount of 1-(4-carboxyphenyl)-2-thiourea(PhTu-COOH)significantly reduces the trap-state density and leads to longer carrier lifetime of the perovskite films.As a result,the inverted solar device made of Ph Tu-COOH-modified MAPbI_(3) perovskite film shows remarkably improved efficiency(from 17.29%to 20.22%)and obviously increased open-circuit voltage(V_(OC))(from 1.043 to 1.143 V),as compared with the pristine device.Moreover,the Ph Tu-COOH-modified PSCs exhibit enhanced operational stability due to the significantly reduced trap-state density.Finally,the optimized solar module fabricated with an active area of 11.28 cm^(2) delivers a high PCE of 17.07%with negligible V_(OC)loss,demonstrating the feasibility of the blade-coating method for large-area perovskite film deposition.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.22334007).
文摘Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge recombination,ion migration,and iodine oxidation.To address this,we propose a novel all-in-one modification strategy employing ammonia borane(BNH6)as a multifunctional complex.By incorporating BNH6 at both buried and upper interfaces simultaneously,we achieve dualinterfacial defect passivation and iodide oxidation suppression through three key mechanisms:(1)hydrolysis-induced interaction with SnO_(2),(2)coordination with Pb^(2+),and(3)inhibition of I−oxidation.This approach significantly enhances device performance,yielding a champion power conversion efficiency(PCE)of 26.43%(certified 25.98%).Furthermore,the unencapsulated device demonstrates prominent enhanced operation stability,maintaining 90%of its initial PCE after 500 h under continuous illumination.Notably,our strategy eliminates the need for separate interface treatments,streamlining fabrication and offering a scalable route toward high-performance perovskite photovoltaics.
基金supported by the National Key R&D Program of China(2023YFB4204504)National Science Fund for Dis-tinguished Young Scholars(T2325016)+7 种基金National Natural Science Foundation of China(U21A2076)Natural Science Foundation of Jiangsu Province(BK20232022,BE2022021 and BE2022026)Fundamental Research Funds for the Central Universities(0213/14380206 and 0205/14380252)Frontiers Science Center for Critical Earth Material Cycling Fund(DLTD2109 and 2024ZD06)Program for Innovative Talents and Entrepreneur in JiangsuChina Postdoctoral Science Foundation(2023M731579)Jiangsu Funding Program for Excellent Postdoctoral Talent(2023ZB348)Postdoctoral Innovative Talents Support Project from the China Postdoctoral Science Foundation(BX20230157)。
文摘Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization.Here,we introduce 2-iodoimidazole(IIZ)into the perovskite precursor,enabling the formation of an air-stable pureδ-phase intermediate,which,upon annealing,fully transforms into a highly orientedα-phase perovskite film with reduced defects and variability.Leveraging this approach,we achieve a stabilized power conversion efficiency of 20.9%for 927.5 cm^(2)perovskite solar modules with high reproducibility.The encapsulated modules meet stringent international photovoltaic testing standards(IEC61215:2021),demonstrating excellent stability under continuous operation,thermal cycling(-40 to 85℃)and damp heat(85℃ and 85%relative humidity).
基金supported by the National Natural Science Foundation of China(Nos.62304111,62304110,22579136)the National Key Research and Development Program of China(2024YFE0201800)+6 种基金the China Postdoctoral Science Foundation(No.2024M761492)the Project of State Key Laboratory of Organic Electronics and Information Displays(Nos.GDX2022010009,GZR2023010046)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(No.NY223053)the Science and Technology Project of Jiangsu(Science and Technology Cooperation Project of HongKong,Macao and Taiwan,No.BZ2023059)Shaanxi Fundamental Science Research Project for Mathematics and Physics(No.22jSY015)Young Talent Fund of Xi'an Association for Science and Technology(No.959202313020)Guangdong Provincial Key Laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems(No.2023B1212010003).
文摘Surface passivation via two-dimensional(2D)perovskite has emerged as a promising strategy to enhance the performance of perovskite solar cells(PSCs)due to the effective compensation of interfacial states.However,the in situ grown 2D perovskite passivation layers typically comprise a mixture of multiple dimensionalities at the interface,where band alignment has only been portrayed qualitatively and empirically.Herein,the interface states for precisely phase-tailored 2D perovskite passivated PSCs are quantitatively investigated.In comparison to traditional passivation molecules,2D perovskite layers based on 4-trifluoromethyl-phenylethylammonium iodide(CF3PEAI)exhibit an increased work function,introducing desirable downward band bending to eliminate the Schottky Barrier.Furthermore,precisely phase-tailored 2D layers could modulate the interface trap density and energetics.The n=1 film delivers optimal performance with a hole extraction efficiency of 95.1%.The optimized n-i-p PSCs in the two-step method significantly improve PCE to 25.40%,along with enhanced photostability and negligible hysteresis.It highlights that tailoring in the composition and phase distribution of the 2D perovskite layer could modulate the interface states at the 2D/3D interface.
基金supported by the National Natural Science Foundation of China (62374104, 62374103)the Taishan Scholar Foundation of Shandong Province (tsqn2023120051105)+1 种基金the Natural Science Foundation of Shandong Province (ZR2023QE321)the Shandong University-Muerhls Joint Laboratory
文摘FAPbI3 has been extensively employed in high-performance perovskite solar cells(PSCs)owing to its optimal bandgap and outstanding optoelectronic properties.Nevertheless,it readily undergoes the formation of a photo-inactiveδ-phase during crystallization,and achieving high-qualityα-phase films becomes even more challenging in antisolvent-free fabrication processes.This study introduces a crystallization control strategy based on 2-dimethylaminopyridine(2-DMAP)ligand engineering to establish a“fast nucleation-slow growth”dual-time-domain crystallization mechanism.2-DMAP facilitates the formation of a functional intermediate phase(2-DMAP·PbI_(2)·DMSO)that enables a direct transformation to theα-FAPbI3 phase and effectively suppresses theδ-phase pathway.Theoretical calculations and systematic experimental characterizations demonstrate that 2-DMAP exhibits stronger binding affinity and a greater charge polarization effect than dimethylsulfoxide(DMSO).This promotes the formation of high-density nuclei during spin coating and delays excessive grain growth during annealing,leading to perovskite films with improved crystallinity,fewer defects,and longer carrier lifetimes.As a result,an antisolvent-free PSC device was successfully fabricated,achieving a power conversion efficiency(PCE)of 25.10%,one of the highest reported for antisolvent-free spin-coating systems.Under ISOS-L-1 standard conditions,the device retained 84.78%of its initial efficiency after 1500 h of continuous illumination,demonstrating excellent operational stability.Moreover,it exhibited remarkable long-term stability under harsh humid and thermal conditions.This work offers a valuable strategy for the large-scale fabrication of high-performance and antisolvent-free PSCs.
基金supported by the National Natural Science Foundation of China (NSFC grant no. 62474028, 52130304, and62222503)the Natural Science Foundation of Sichuan Province(2025ZNSFSC0037, 2025ZNSFSC1460, and 2024NSFSC1447)+1 种基金the National Key R and D Program of China (2023YFB2604101)sponsored by the Sichuan Province Key Laboratory of Display Science and Technology
文摘The crystallization and aggregation characteristics of the active layer components in organic solar cells(OSCs)are one of the core factors determining photovoltaic performance,influencing the entire process from light absorption to charge separation,transport,and ultimately charge collection.Dynamic changes in crystallization and aggregation states can also disrupt the microstructure of the active layer,thus shortening the lifetime of the cell.In this study,a morphology modulation strategy is proposed to regulate the crystallization kinetics of non-fullerene acceptors by employing the polymer molecule PYIT as a nucleating agent.An appropriate amount of PYIT was first completely dissolved with the non-fullerene acceptor Y6 and left to stand for 24 h,followed by the fabrication of layer-by-layer processed OSCs.Experiments demonstrated that high crystallinity of PYIT allows it to act as a crystallization nucleus,promoting the crystallization,orientation consistency,and ordered stacking of the acceptor.These nanoscale structural optimizations facilitate efficient charge transport,enhance exciton dissociation efficiency,and suppress unfavorable energetic disorder.Consequently,not only was the power conversion efficiency(PCE)of D18-Cl/Y6-based layer-by-layer processed OSC increased from 18.08%to 19.13%,but the atmospheric stability and long-term lifetime of the OSCs were also significantly improved.Notably,this strategy is also applicable to indoor OSCs,and the PYIT-optimized device can achieve a PCE of 27.0%under 1000 lux light-emitting diode(LED,3200K)irradiation,which is superior to that of the control device(24.2%).This work develops a crystal engineering strategy that is able to simultaneously optimize the microscopic morphology and charge dynamics properties in OSCs,thereby achieving simultaneous improvement in efficiency and stability.
基金financial support from the Shccig-Qinling Program(SMYJY202300294C)the Science,Technology,and Innovation Commission of Shenzhen Municipality(GJHZ20220913143204008,JCYJ20220818103417036)+1 种基金the National Natural Science Foundation of China(22261142666,52172237,52372225)the Shaanxi Science Fund for Distinguished Young Scholars(2022JC-21)。
文摘Although lead(Pb)-based perovskite solar cells(PSCs)have garnered intense attention for their remarkable photovoltaic conversion efficiency,their commercial process is urgently in need of an effective damage-evaluation system for the early diagnosis of faulty PSCs.The main cause of microdamage in perovskite films is the outflow of Pb,which significantly impacts device performance.However,no reliable correlation has been established between classical damage detection techniques and Pb detection,resulting in limited detection sensitivity.Here,we report an in situ visual microdamage evaluation method of PSCs by coating the device surface with a silica gel encapsulation layer containing porphyrin molecules.This detection technology enables high selectivity and sensitivity based on the strong complexation between the porphyrin ring and trace Pb outflow from degraded PSCs.By establishing the linear relationship between the fluorescence intensity and Pb concentration in PSCs,trace Pb outflow is pinpointed and quantified with a low detection limit of 0.65μg cm^(-2).An applet is developed for the insitu visual fluorescence detection method to facilitate the continuous real-time monitoring of series-type PSCs,thereby enabling the prompt identification and replacement of damaged PSCs and ensuring the swift restoration of high efficiency.
基金National Key Research and Development Program of China (2022YFC3004004)National Natural Science Foundation of China (42075155,12241104)National Natural Science Foundation of China Joint Fund (U2342213)。
文摘The infrared channels of the FY-4B advanced geosynchronous radiation imagers(AGRI) play a crucial role in temperature and humidity analyses for mesoscale numerical weather prediction, particularly in enhancing the initial field quality and the forecasting accuracy of the model. This study assimilated FY-4B AGRI data into the CMA-MESO model and analyzed the bias characteristics and correction methods. Analysis of the AGRI data revealed a clear diurnal variation in the bias, which was positively correlated with the solar elevation angle. However, the diurnal variation in the bias lagged behind the solar elevation angle, likely owing to temperature changes and delayed instrument responses resulting from solar radiation. To address this issue, we propose a correction method that utilizes the solar elevation angle after an optimal time shift. Using the time-shifted solar elevation angle as a predictor effectively reduces the diurnal variation in bias and significantly improves the correction effect. This approach provides theoretical support for the assimilation of FY-4B AGRI data into mesoscale numerical weather predictions, thereby enhancing the reliability of the assimilation results.
