To investigate the upconversion emission, this paper synthesizes Tm^3＋ and Yb^3＋ codoped Y2O3 nanoparticles, and then coats them with TiO2 shells for different coating times. The spectral results of TiO2 coated nano...To investigate the upconversion emission, this paper synthesizes Tm^3＋ and Yb^3＋ codoped Y2O3 nanoparticles, and then coats them with TiO2 shells for different coating times. The spectral results of TiO2 coated nanoparticles indicate that upconversion emission intensities have respectively been enhanced 3.2, 5.4, and 2.2 times for coating times of 30, 60 and 90 min at an excitation power density of 3.21× 10^2 W. cm^-2, in comparison with the emission intensity of non-coated nanoparticles. Therefore it can be concluded that the intense upconversion emission of Y2O3：Tm^3＋, Yb^3＋ nanoparticles can be achieved by coating the particle surfaces with a shell of specific thickness.展开更多
室温下采用射频磁控溅射法,在硅衬底上制备了Y2O3-TiO2氧化物复合薄膜.利用XRD(X-ray diffraction)和AFM(atomic force microscopy)分析观察了退火前后样品的物相、形貌等变化,讨论了致密薄膜的生长机理.实验发现,溅射功率越大,薄膜的...室温下采用射频磁控溅射法,在硅衬底上制备了Y2O3-TiO2氧化物复合薄膜.利用XRD(X-ray diffraction)和AFM(atomic force microscopy)分析观察了退火前后样品的物相、形貌等变化,讨论了致密薄膜的生长机理.实验发现,溅射功率越大,薄膜的平整度和致密度越好.对热处理前后样品的结晶结构和表面形貌的分析结果显示,在本实验参数范围内,随着溅射功率的增大,更多的Y2O3填入TiO2周围的孔隙、抑制了TiO2大颗粒的形成,改善了薄膜的平整度和致密度.热处理后的XRD测试结果还表明,Y2O3的掺入还抑制了TiO2锐钛矿晶粒的形成,有利于制备以金红石为主相的高介电常数薄膜.展开更多
The three composites Y2O3 :Er3+ , Y2O3 :Er3+ /Yb 3+ andY2O3 :Er3+ /TiO2 were prepared using coprecipitation and sol-gel techniques. Their morphology, specific surface area, porosity, UV-vis. absorption spectra and flu...The three composites Y2O3 :Er3+ , Y2O3 :Er3+ /Yb 3+ andY2O3 :Er3+ /TiO2 were prepared using coprecipitation and sol-gel techniques. Their morphology, specific surface area, porosity, UV-vis. absorption spectra and fluorescence spectra were measured using SEM, TEM, surface analysis, UV-vis. absorption and photoluminescence spectrophotometry. SEM and TEM showed that samples prepared using coprecipitation were dispersed, while Y2O3 :Er3+ /TiO2 particles possessed a mesoporous surface and average diameter of about 10 nm. The specific surface area and porosity of Y2O3 :Er3+ /TiO2 did not result from the combination of the individual properties of Y2O3 :Er3+ and TiO2 . The specific surface area of Y2O3 :Er3+ /TiO2 was 135.991 m 2 /g and was 4.8 times that of Y2O3 :Er3+ and 2.5 times that of Degussa P25 TiO2 . A high specific surface area is conducive for application to TiO2 photocatalysis. The fluorescence spectra of the three composites exhibited three upconversion emission peaks with maxima at 237, 395 and 467 nm following excitation at 388, 500 and 570 nm, respectively.展开更多
文摘To investigate the upconversion emission, this paper synthesizes Tm^3＋ and Yb^3＋ codoped Y2O3 nanoparticles, and then coats them with TiO2 shells for different coating times. The spectral results of TiO2 coated nanoparticles indicate that upconversion emission intensities have respectively been enhanced 3.2, 5.4, and 2.2 times for coating times of 30, 60 and 90 min at an excitation power density of 3.21× 10^2 W. cm^-2, in comparison with the emission intensity of non-coated nanoparticles. Therefore it can be concluded that the intense upconversion emission of Y2O3：Tm^3＋, Yb^3＋ nanoparticles can be achieved by coating the particle surfaces with a shell of specific thickness.
文摘室温下采用射频磁控溅射法,在硅衬底上制备了Y2O3-TiO2氧化物复合薄膜.利用XRD(X-ray diffraction)和AFM(atomic force microscopy)分析观察了退火前后样品的物相、形貌等变化,讨论了致密薄膜的生长机理.实验发现,溅射功率越大,薄膜的平整度和致密度越好.对热处理前后样品的结晶结构和表面形貌的分析结果显示,在本实验参数范围内,随着溅射功率的增大,更多的Y2O3填入TiO2周围的孔隙、抑制了TiO2大颗粒的形成,改善了薄膜的平整度和致密度.热处理后的XRD测试结果还表明,Y2O3的掺入还抑制了TiO2锐钛矿晶粒的形成,有利于制备以金红石为主相的高介电常数薄膜.
基金supported by the National Natural Science Foundation of China (20876125)the Research Fund for the Doctoral Program of Higher Education of China (20096101110013)+1 种基金the Natural Science Foundation of Shanxi Province (2010JZ002)the Northwest University Graduate Cross-discipline Fund (09YJC27and09YJC24)
文摘The three composites Y2O3 :Er3+ , Y2O3 :Er3+ /Yb 3+ andY2O3 :Er3+ /TiO2 were prepared using coprecipitation and sol-gel techniques. Their morphology, specific surface area, porosity, UV-vis. absorption spectra and fluorescence spectra were measured using SEM, TEM, surface analysis, UV-vis. absorption and photoluminescence spectrophotometry. SEM and TEM showed that samples prepared using coprecipitation were dispersed, while Y2O3 :Er3+ /TiO2 particles possessed a mesoporous surface and average diameter of about 10 nm. The specific surface area and porosity of Y2O3 :Er3+ /TiO2 did not result from the combination of the individual properties of Y2O3 :Er3+ and TiO2 . The specific surface area of Y2O3 :Er3+ /TiO2 was 135.991 m 2 /g and was 4.8 times that of Y2O3 :Er3+ and 2.5 times that of Degussa P25 TiO2 . A high specific surface area is conducive for application to TiO2 photocatalysis. The fluorescence spectra of the three composites exhibited three upconversion emission peaks with maxima at 237, 395 and 467 nm following excitation at 388, 500 and 570 nm, respectively.
