The sensitive and selective monitoring of nitrogen dioxide(NO_(2))can have a significant impact on environmental monitoring and health protection.Unfortunately,commercial NO_(2)sensors largely suffer from poor detecti...The sensitive and selective monitoring of nitrogen dioxide(NO_(2))can have a significant impact on environmental monitoring and health protection.Unfortunately,commercial NO_(2)sensors largely suffer from poor detection sensitivity and high operating temperatures.In this study,we developed a sensitive roomtemperature NO_(2)sensor based on an n-n heterojunction comprised of a Cs_(2)AgInCl_(6)perovskite with chlorine vacancies(VCl)and TiO_(2)nanotube arrays(VCl-Cs_(2)AgInCl_(6)/TiO_(2)NTs).In this design,the large number of chlorine vacancies in the Cs_(2)AgInCl_(6)perovskite act as active sites for oxygen adsorption and the subsequent sensing reaction.Benefitting from the formation of the n-n type heterojunction and the onedimensional structure of the TiO_(2)nanotubes,the Fermi levels are aligned,thereby facilitating the efficient transport of charge carriers between the target gas and the sensing interface.The resulting VClCs_(2)Ag In Cl_(6)/TiO_(2)NTs demonstrate a high response of 7.26 toward 1 ppm of NO_(2)at room temperature,possess a detection limit as low as 20 ppb,and have outstanding performance stability.This work widens the application of perovskite materials and indicates their potential application in medical diagnostics,environmental monitoring,and smart sensing systems.展开更多
Copper is a versatile material,commonly utilized in power transmission and electronic devices,but its relative high reactivity necessitates a long-lasting protective technique.Here,we report a method that combines pla...Copper is a versatile material,commonly utilized in power transmission and electronic devices,but its relative high reactivity necessitates a long-lasting protective technique.Here,we report a method that combines plasma-enhanced non-equilibrium magnetron sputtering physical vapor deposition(PEUMS-PVD)and anodization to construct a self-healing three-dimensional Ti/Al-doped TiO_(2)nanotubes/Ti_(3)AlC_(2)coating on the surface of Cu substrates.This novel strategy enhances the corrosion resistance of copper substrates in marine environments,with corrosion current densities of up to 4.5643×10^(−8)A/cm^(2).Among them,the doping of nano-aluminum particles makes the coating self-healing.The mechanistic analysis of the corrosion behaviors during early immersion experiments was conducted using electrochemical noise,and revealed that during the initial stages of coating immersion,uniform corrosion predominates,with a minor occurrence of localized corrosion.展开更多
The size tuning of one-dimensional(1D)spatially confined electrocatalysts with abundant exposed active sites is still a huge challenge for electrocatalytic hydrogen/oxygen evolution reactions(HER/OER)and overall water...The size tuning of one-dimensional(1D)spatially confined electrocatalysts with abundant exposed active sites is still a huge challenge for electrocatalytic hydrogen/oxygen evolution reactions(HER/OER)and overall water splitting(OWS).Herein,we construct CoPNi_(2)P heterostructure embedded ultrafine N-doped carbon nanotubes(CoP-Ni_(2)P@U-NCNTs/NF)with a diameter size of about 50 nm from 2D cobalt-based zeolitic imidazolate framework(Co-ZIF-L/NF)via phosphorylation strategy,while Co-Ni embedded N-doped carbon nanotubes with a diameter of about 200 nm are constructed via carbonization.The size-tuned CoP-Ni_(2)P@U-NCNTs/NF possesses abundant active sites and electron transport pathways,and the stability of CoP-Ni_(2)P heterostructure is improved by carbon coating.Density functional theory(DFT)calculation results verify that the Ni_(2)P and CoP heterojunction synergistic ally promotes the electron redistribution of the Co-Ni to optimize Gibbs free energy of H*(ΔGH*).Meanwhile,the NCNTs-confined CoP-Ni_(2)P induced by phosphating accelerates the reconstruction of the CoOOH-NiOOH compared with Ni-Co,therebyboosting the reaction kinetics of efficient OWS due to the reduced reaction energy barrier of O-O coupling.As expected,the CoP-Ni_(2)P@U-NCNTs/NF favors a low overpotential of 67/203 mV@10 mA cm^(-2)for the HER/OER,realizing an ultralow cell voltage of 1.52V@10 mA cm^(-2)for OWS and long-term durability at various current densities.This work provides a feasible approach to tuning the composition and structure of highefficiency electrocatalysts for the production of green hydrogen.展开更多
Both Ti foil and porous Ti were anodized in 0.5%HF and in ethylene glycol electrolyte containing 0.5%NH4F(mass fraction) separately. The results show that TiO2 nanotubes can be formed on Ti foil by both processes, whe...Both Ti foil and porous Ti were anodized in 0.5%HF and in ethylene glycol electrolyte containing 0.5%NH4F(mass fraction) separately. The results show that TiO2 nanotubes can be formed on Ti foil by both processes, whereas TiO2 nanotubes can be formed on porous Ti only in the second process. The overhigh current density led to the failure of the formation nanotubes on porous Ti in 0.5%HF electrolyte. TiO2 nanotubes were characterized by SEM and XRD. TiO2 nanotubes on porous Ti were thinner than those on Ti foil. Anatase was formed when TiO2 nanotubes were annealed at 400 °C and fully turned into rutile at 700 °C. To obtain good photodegradation, the optimal heat treatment temperature of TiO2 nanotubes was 450 °C. The porosity of the substrates influenced photodegradation properties. TiO2 nanotubes on porous Ti with 60% porosity had the best photodegradation.展开更多
A novel titanium dioxide （TiO2） film comprising both nanotubes and nanopaticles was fabricated by an anodization process of the modified titanium. The local electric field at the anodized surface was simulated and i...A novel titanium dioxide （TiO2） film comprising both nanotubes and nanopaticles was fabricated by an anodization process of the modified titanium. The local electric field at the anodized surface was simulated and its influence on the morphology of the TiO2 film was discussed. The results show that the electric field strength is enhanced by the covering. The growth rate of TiO2 increases with the assist of the local electric field. However, TiO2 dissolution is hindered since the local electric field prevents [TiF6]6- from diffusing. It means that the balance condition for the formation of nanotubes is broken, and TiO2 nanoparticles are formed. Moreover, the crystal structure of the TiO2 film was confirmed using X-ray diffraction and Raman analysis. The anatase is a main phase for the proposed film.展开更多
A layer of graphene(GR)particles was successfully deposited at the interface between Co(OH)2 nanoparticles and TiO2 nanotubes,aiming to improve the photoelectrochemical performance of the large-bandgap semiconductor T...A layer of graphene(GR)particles was successfully deposited at the interface between Co(OH)2 nanoparticles and TiO2 nanotubes,aiming to improve the photoelectrochemical performance of the large-bandgap semiconductor TiO2.The obtained Co(OH)2/GR/TiO2 was extensively characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV–vis absorption spectra and photoluminescence(PL)emission spectra.Electrochemical impedance spectra,photogenerated potential-time(E-t),photocurrent density-time(i-t)and i-E curves and open circuit potential(OCP)curves were measured to investigate the photoelectrochemical activities and photogenerated cathodic protection properties.The results revealed that Co(OH)2/GR/TiO2 exhibits excellent photoelectrochemical and photogenerated cathodic performance due to synergistic effect between Co(OH)2 and graphene.Co(OH)2 and graphene co-modified TiO2 photoanode could provide an effective protection for 304 stainless steel(304 SS)in 3.5 wt%Na Cl solution for 12 h,which would be promising for future practical applications in the field of marine corrosion protection.展开更多
Two-dimensional (2D) ultrathin MoS2-modified black Ti^3+-TiO2 nanotubes were fabricated using an electrospinning-hydrothermal treatment-reduction method.Bare TiO2 nanotubes were fabricated via electrospinning.Then,2D ...Two-dimensional (2D) ultrathin MoS2-modified black Ti^3+-TiO2 nanotubes were fabricated using an electrospinning-hydrothermal treatment-reduction method.Bare TiO2 nanotubes were fabricated via electrospinning.Then,2D MoS2 lamellae were grown on the surface of the nanotubes and Ti^3+/Ov ions were introduced by reduction.The photocatalytic performance of the 2D MoS2/Ti^3+-TiO2 nanotubes was^15 times better than that of TiO2.The HER enhancement of the MoS2/Ti^3+-TiO2 nanotubes can be attributed to the Pt-like behavior of 2D MoS2 and the presence of Ti^3+-ions,which facilitated the quick diffusion of the photogenerated electrons to water,reducing the H2 activation barrier.The presence of Ov ions in the nanotubes and their hollow structure increased their solar utilization.展开更多
Recent progress in nanoscience and nanotechnology creates new opportunities in the design of novel SnO2 nanomaterials for photocatalysis and photoelectrochemical. Herein, we firstly highlight a facile method to prepar...Recent progress in nanoscience and nanotechnology creates new opportunities in the design of novel SnO2 nanomaterials for photocatalysis and photoelectrochemical. Herein, we firstly highlight a facile method to prepare threedimensional porous networks of ultra-long SnO2 nanotubes through the single capillary electrospinning technique.Compared with the traditional SnO2 nanofibers, the as-obtained three-dimensional porous networks show enhancement of photocurrent and photocatalytic activity, which could be ascribed to its improved light-harvesting efficiency and high separation efficiency of photogenerated electron–hole pairs. Besides, the synthesis route delivered three-dimensional sheets on the basis of interwoven nanofibrous networks, which can be readily recycled for the desirable circular application of a potent photocatalyst system.展开更多
The process, that the polycrystalline TiO2 powders were converted into TiO2 nanotubes, was observed with transmission electron microscope. The results obtained indicated that in concentrated NaOH aqueous solution, an...The process, that the polycrystalline TiO2 powders were converted into TiO2 nanotubes, was observed with transmission electron microscope. The results obtained indicated that in concentrated NaOH aqueous solution, anisotropic swelling appears on the polycrystalline TiO2 granula at first, and then the nanotubes are formed.展开更多
In this paper,the TiO_2 nanotubes were synthesized by hydrothermal method using a 10 mol/L NaOH aqueous solution at 150℃. The structure of prepared materials was characterized by X-ray diffraction（XRD）,transmission...In this paper,the TiO_2 nanotubes were synthesized by hydrothermal method using a 10 mol/L NaOH aqueous solution at 150℃. The structure of prepared materials was characterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM）. scanning electron microscope（SEM） and Brunauer-Emmett-Teller（BET）.The prepared TiO_2 nanotubes were used to prepare thick film gas sensors and the gas sensing properties to various gases were tested.Results show the prepared TiO_2 nanotube gas sensors responses to ethanol under dry condition at 450℃.This could be attributed to the fact that it had high porous morphology and a higher pore volume,which can promote the diffusion of ethanol deep inside the films and improve the sensor response. Moreover,the gas sensor made with nanotubes exhibit high selective response towards ethanol gas compared with H_2,CO,acetone.展开更多
TiO2 nanotube precursor was synthesized by the hydrothermal reaction of TiO2 powders with NaOH solution and the properties of the nanotube materials were tuned using different post-treatments. Transmission electron mi...TiO2 nanotube precursor was synthesized by the hydrothermal reaction of TiO2 powders with NaOH solution and the properties of the nanotube materials were tuned using different post-treatments. Transmission electron microscopic （TEM） observation revealed that the nanotube could be obtained by either a direct rinse with acid solution or rinse with distilled water followed by acid solution. The results of X-ray diffraction （XRD） and inductively coupled plasma （ICP） analysis indicated that the nanotube material was composed of H2Ti2O5·H2O. In addition, the photocatalytic activities of the resulting catalysts were found to be strongly dependent on the post-treatment. The results of the photocatalytic reaction showed that the degradation of Acid-red 3B dye fitted pseudo-zero-order kinetics and TiO2 nanotube prepared under direct rinse with acid solution exhibited a higher catalytic efficiency compared to other catalysts.展开更多
The high cost and low reserves of noble metals greatly hinder their practical applications in new energy production and conversion.The exploration of cost-effective alternative electrocatalysts with the ability to dri...The high cost and low reserves of noble metals greatly hinder their practical applications in new energy production and conversion.The exploration of cost-effective alternative electrocatalysts with the ability to drive hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is extremely significant to promote overall water splitting.Herein,ultrathin CoSe2/CNTs nanocomposites have been synthesized by a facile two-step method,where the ultrathin Co-MOF(metal organic-framework)decorated with cable-like carbon nanotubes(CNTs)(Co-MOF/CNTs)was initially fabricated,and followed a lowtemperature selenization process.The ultrathin CoSe2 nanosheets as well as the superior conductivity of CNTs synergistically resulted in abundant active sites and enhanced conductivity to boost the electrocatalytic activity.The as-prepared CoSe2/CNTs electrocatalysts exhibited an overpotential of190 mV and 300 mV vs.reversible hydrogen electrode(RHE)at a current density of 10 mA/cm^(2) for the HER and OER in alkaline solution,respectively,and demonstrated superior durability.Furthermore,the as-prepared bifunctional CoSe2/CNTs electrocatalysts can act as cathode and anode in an electrolyzer,showing a cell voltage of 1.75 V at 10 mA/cm^(2) for overall water splitting.展开更多
We report the development of a novel visible response BiVO_4/TiO_2(N_2) nanotubes photoanode for photoelectrocatalytic applications. The nitrogen-treated TiO_2 nanotube shows a high carrier concentration rate, thus re...We report the development of a novel visible response BiVO_4/TiO_2(N_2) nanotubes photoanode for photoelectrocatalytic applications. The nitrogen-treated TiO_2 nanotube shows a high carrier concentration rate, thus resulting in a high efficient charge transportation and low electron–hole recombination in the TiO_2–BiVO_4. Therefore, the BiVO_4/TiO_2(N_2) NTs photoanode enabled with a significantly enhanced photocurrent of 2.73 mA cm^(-2)(at 1 V vs. Ag/Ag Cl) and a degradation efficiency in the oxidation of dyes under visible light. Field emission scanning electron microscopy, X-ray diffractometry, energy-dispersive X-ray spectrometer, and UV–Vis absorption spectrum were conducted to characterize the photoanode and demonstrated the presence of both metal oxides as a junction composite.展开更多
CO_(2) methanation using nickel-based catalysts has attracted large interest as a promising power-to-gas route.Ni nanoparticles supported on nitrogen-doped CNTs with Ni loadings in the range from 10 wt% to 50 wt% were...CO_(2) methanation using nickel-based catalysts has attracted large interest as a promising power-to-gas route.Ni nanoparticles supported on nitrogen-doped CNTs with Ni loadings in the range from 10 wt% to 50 wt% were synthesized by impregnation,calcination and reduction and characterized by elemental analysis,X-ray powder diffraction,H_(2) temperature-programmed reduction,CO pulse chemisorption and transmission electron microscopy.The Ni/NCNT catalysts were highly active in CO_(2) methanation at atmospheric pressure,reaching over 50% CO_(2) conversion and over 95% CH_(4) selectivity at 340℃ and a GHSV of50,000 mL g^(-1) h^(-1) under kinetically controlled conditions.The small Ni particle sizes below 10 nm despite the high Ni loading is ascribed to the efficient anchoring on the N-doped CNTs.The optimum loading of 30 wt%-40 wt% Ni was found to result in the highest Ni surface area,the highest degree of conversion and the highest selectivity to methane.A constant TOF of 0.3 s^(-1) was obtained indicating similar catalytic properties of the Ni nanoparticles in the range from 10 wt%to 50 wt% Ni loading.Long-term experiments showed that the Ni/NCNT catalyst with 30 wt% Ni was highly stable for 100 h time on stream.展开更多
Fe2O3@polypyrrole nanotubes （Fe2O3@PPy nanotubes） have been successfully prepared by in-situ polymerization of the pyrrole on the surface of Fe2O3 nanotubes （Fe2O3-NTs）, via using L-Lysine as modified surfactant. ...Fe2O3@polypyrrole nanotubes （Fe2O3@PPy nanotubes） have been successfully prepared by in-situ polymerization of the pyrrole on the surface of Fe2O3 nanotubes （Fe2O3-NTs）, via using L-Lysine as modified surfactant. Hollow PPy nanotubes were also produced by dissolution of the Fe2O3 core from the core/shell composite nanotubes with 1 mol,L-1 HC1. Scanning electron microscopy（SEM）, transmission electron microscope （TEM）, selective-area electron diffraction （SAED）, X-ray powder diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared spectroscopy（FT-IR） confirmed the formation of Fe2O3-NTs and Fe2O3@PPy core/shell nanotubes. Its catalytic properties were investigated under the ultrasound. The results of UV-vis spectroscopy （UV） demonstrated Rhodamine B （RhB） can be efficiently degraded by Fe2O3 @PPy nanotubes.展开更多
Polyaniline （PANI） composite nanotubes （90-130 nm in diameter） containing titanium dioxide （TiO2） nanoparticles （about 10 nm in diameter） were synthesized through a self-assembly process in the presence of a-n...Polyaniline （PANI） composite nanotubes （90-130 nm in diameter） containing titanium dioxide （TiO2） nanoparticles （about 10 nm in diameter） were synthesized through a self-assembly process in the presence of a-naphthalenesulfonic acid （a-NSA） as the dopant. It was found that PANI-TiO2 composites and PANI nanotubes both behaved with significant photocatalytic activities towards AZO dyes, during 2 h photocatalytic processes under natural light, the degradation ratio was 94.2% and 97.2% respectively （methyl orange and orange II）. The morphology of such products was characterized by SEM. The specific surface area of such composite nanotubes was 14.7 m2/g compared to normal polyaniline which was 0.27 m2/g. IR and X-ray diffraction characterizations showed that the chemical chain of the composite nanotubes was identical to that of the doped PANI. It may provide a new way for photodegradation of organic contaminants by using conjugated polymer with dimensional structure.展开更多
IrO2 and IrRuOx(Ir:Ru 60:40 at%),supported by 50 wt%onto titania nanotubes(TNTs)and(3 at%Nb)Nb-doped titania nanotubes(Nb-TNTs),as electrocatalysts for the oxygen evolution reaction(OER),were synthesized and character...IrO2 and IrRuOx(Ir:Ru 60:40 at%),supported by 50 wt%onto titania nanotubes(TNTs)and(3 at%Nb)Nb-doped titania nanotubes(Nb-TNTs),as electrocatalysts for the oxygen evolution reaction(OER),were synthesized and characterized by means of structural,surface analytical and electrochemical techniques.Nb doping of titania significantly increased the surface area of the support from 145(TNTs)to 260 m2g-1(Nb-TNTs),which was significantly higher than those of the Nb-doped titania supports previously reported in the literature.The surface analytical techniques showed good dispersion of the catalysts onto the supports.The X-ray photoelectron spectroscopy analyses showed that Nb was mainly in the form of Nb(IV)species,the suitable form to behave as a donor introducing free electrons to the conduction band of titania.The redox transitions of the cyclic voltammograms,in agreement with the XPS results,were found to be reversible.Despite the supported materials presented bigger crystallite sizes than the unsupported ones,the total number of active sites of the former was also higher due to their better catalyst dispersion.Considering the outer and the total charges of the cyclic voltammograms in the range 0.1–1.4 V,stability and electrode potentials at given current densities,the preferred catalyst was Ir O2 supported on the Nb-TNTs.The electrode potentials corresponding to given current densities were between the smallest ones given in the literature despite the small oxide loading used in this work and its Nb doping,thus making the Nb-TNTs-supported IrO2 catalyst a promising candidate for the OER.The good dispersion of IrO2,high specific surface area of the Nb-doped supports,accessibility of the electroactive centers,increased stability due to Nb doping and electron donor properties of the Nb(IV)oxide species were considered the main reasons for its good performance.展开更多
Silver matrix composite brushes were fabricated by means of powder metallurgy, which included pressing at 300 MPa and then sintering for 1 h in pure H2 protective atmosphere at 700 ℃ and repressing at 500 MPa. Four k...Silver matrix composite brushes were fabricated by means of powder metallurgy, which included pressing at 300 MPa and then sintering for 1 h in pure H2 protective atmosphere at 700 ℃ and repressing at 500 MPa. Four kinds composites with different compositions were produced, and the mechanical properties and electrical wear performance were investigated. The results showed that the composite added with carbon nanotubes had a higher hardness and strength, a lower contact voltage drop and an excellent anti-wear property in electrical sliding wear, because of the reinforcement ability of carbon nanotubes. Adding graphite to the composite also decreased the wear loss and contact voltage drop, because graphite had an electrical current conducting ability which not only made the current pass the lubricating films easily but also eliminated and reduced the arc and spark effectively.展开更多
Microwave absorbing materials(MAMs)with wide effective absorption bandwidth(EAB)and low filling ratio are highly desirable for practical applications.Rational design in components and structures is one of the effectiv...Microwave absorbing materials(MAMs)with wide effective absorption bandwidth(EAB)and low filling ratio are highly desirable for practical applications.Rational design in components and structures is one of the effective strategies to achieve MAMs with high performance.Herein,double-shelled hollow(DSH)polypyrrole(PPy)nanotubes were synthesized with hydrochloric acid(HCl)and sodium pstyrene sulfonate(SS)co-doping polymerization process using manganese dioxide(MnO_(2))nanorods as a self-sacrifice template.With the increase of HCl concentration,the 1D MnO_(2) core diminishes gradually to form the MnO_(2)@PPy coaxial nanostructures and finally the DSH PPy nanotube,which tunes the microwave absorption performance.Importantly,the DSH PPy nanotubes exhibit excellent microwave absorption of an optimal reflection loss of–50.4 dB and a wide EAB of 7.7 GHz with a low filling ratio of 5 wt%in a paraffin wax matrix.The excellent microwave absorption is believed to be mainly attributed to the enhanced synergistic effects of interfacial polarization and conduction loss arising from the unique DSH structure and the co-doping polymerization.展开更多
As a preliminary investigation towards obtaining carbon nanotube composite adsorbent for CO2 capture, in this study CO2 adsorption performance of three commercial carbon nanotubes （CNTs） one single-walled carbon nan...As a preliminary investigation towards obtaining carbon nanotube composite adsorbent for CO2 capture, in this study CO2 adsorption performance of three commercial carbon nanotubes （CNTs） one single-walled carbon nanotubes （SWCNTs）, and two （2） different multi-walled carbon nanotubes （referred to as A-MWCNTs and B-MWCNTs） were evaluated and compared. The purpose of this study was to compare the different types of CNTs and select the best to serve as the solid anchor in the development of a hydrophobic composite adsorbent material for CO2 capture. The N2 physi- sorption of the CNTs was conducted to determine their surface area, pore volume and pore size. In addition, morphology and purity of the CNTs were checked with Transmission Electron Microscopy and Raman Spectroscopy, respectively. The CO2 adsorption capacity of the CNTs was evaluated using Thermo-gravimetric analysis （TGA） at 1.1 bar, at operating temperature ranged from 25 to 55 ~C and at different CO2 feed flow rates, in order to evaluate the effects of these variables on the CO2 adsorption capacity. The results of CO2 adsorption with the TGA show that CO2 adsorption capacity for both SWCNTs and MWCNTs was the highest at 25 ~C. Changing the CO2 flowrates had no significant effect on the adsorption capacity of MWCNTs, but decreasing the CO2 flow rate resulted in the enhancement of the CO2 adsorption capacity of SWCNTs. Overall, it was found that the SWCNTs displayed the highest CO2 adsorption capacity （29.97 gCO2/kg ad- sorbent） when compared to the MWCNTs （12.09 gCO2/kg adsorbent）, indicating a 150% increase in adsorption capacity over MWCNTs.展开更多
基金supported by the National Natural Science Foundation of China(No.22374015)the Fundamental Research Funds for the Central Universities(N2424020)+1 种基金Liaoning Province Foundation for Distinguished Young Scholars(No.1727146584490,to Y.-Y.Song)Liaoning Binhai laboratory(No.LBLG-2024-02)。
文摘The sensitive and selective monitoring of nitrogen dioxide(NO_(2))can have a significant impact on environmental monitoring and health protection.Unfortunately,commercial NO_(2)sensors largely suffer from poor detection sensitivity and high operating temperatures.In this study,we developed a sensitive roomtemperature NO_(2)sensor based on an n-n heterojunction comprised of a Cs_(2)AgInCl_(6)perovskite with chlorine vacancies(VCl)and TiO_(2)nanotube arrays(VCl-Cs_(2)AgInCl_(6)/TiO_(2)NTs).In this design,the large number of chlorine vacancies in the Cs_(2)AgInCl_(6)perovskite act as active sites for oxygen adsorption and the subsequent sensing reaction.Benefitting from the formation of the n-n type heterojunction and the onedimensional structure of the TiO_(2)nanotubes,the Fermi levels are aligned,thereby facilitating the efficient transport of charge carriers between the target gas and the sensing interface.The resulting VClCs_(2)Ag In Cl_(6)/TiO_(2)NTs demonstrate a high response of 7.26 toward 1 ppm of NO_(2)at room temperature,possess a detection limit as low as 20 ppb,and have outstanding performance stability.This work widens the application of perovskite materials and indicates their potential application in medical diagnostics,environmental monitoring,and smart sensing systems.
基金Projects(42106051,42006046,U2106206) supported by the National Natural Science Foundation of ChinaProject(22373501D) supported by Hebei Provincial Key R&D Program,China。
文摘Copper is a versatile material,commonly utilized in power transmission and electronic devices,but its relative high reactivity necessitates a long-lasting protective technique.Here,we report a method that combines plasma-enhanced non-equilibrium magnetron sputtering physical vapor deposition(PEUMS-PVD)and anodization to construct a self-healing three-dimensional Ti/Al-doped TiO_(2)nanotubes/Ti_(3)AlC_(2)coating on the surface of Cu substrates.This novel strategy enhances the corrosion resistance of copper substrates in marine environments,with corrosion current densities of up to 4.5643×10^(−8)A/cm^(2).Among them,the doping of nano-aluminum particles makes the coating self-healing.The mechanistic analysis of the corrosion behaviors during early immersion experiments was conducted using electrochemical noise,and revealed that during the initial stages of coating immersion,uniform corrosion predominates,with a minor occurrence of localized corrosion.
基金financially supported by the National Natural Science Foundation of China(Nos.52072002 and 52372037)the National Natural Science Foundation of China(No.22108003)+3 种基金the Outstanding Scientific Research and Innovation Team Program of Higher Education Institutions of Anhui Province(No.2023AH010015)the China Postdoctoral Science Foundation(No.2024M750012)the Excellent Young Talents Fund Program of Higher Education Institutions of Anhui Province(No.2023AH030026)the financial support from the Anhui International Research Center of Energy Materials Green Manufacturing and Biotechnology
文摘The size tuning of one-dimensional(1D)spatially confined electrocatalysts with abundant exposed active sites is still a huge challenge for electrocatalytic hydrogen/oxygen evolution reactions(HER/OER)and overall water splitting(OWS).Herein,we construct CoPNi_(2)P heterostructure embedded ultrafine N-doped carbon nanotubes(CoP-Ni_(2)P@U-NCNTs/NF)with a diameter size of about 50 nm from 2D cobalt-based zeolitic imidazolate framework(Co-ZIF-L/NF)via phosphorylation strategy,while Co-Ni embedded N-doped carbon nanotubes with a diameter of about 200 nm are constructed via carbonization.The size-tuned CoP-Ni_(2)P@U-NCNTs/NF possesses abundant active sites and electron transport pathways,and the stability of CoP-Ni_(2)P heterostructure is improved by carbon coating.Density functional theory(DFT)calculation results verify that the Ni_(2)P and CoP heterojunction synergistic ally promotes the electron redistribution of the Co-Ni to optimize Gibbs free energy of H*(ΔGH*).Meanwhile,the NCNTs-confined CoP-Ni_(2)P induced by phosphating accelerates the reconstruction of the CoOOH-NiOOH compared with Ni-Co,therebyboosting the reaction kinetics of efficient OWS due to the reduced reaction energy barrier of O-O coupling.As expected,the CoP-Ni_(2)P@U-NCNTs/NF favors a low overpotential of 67/203 mV@10 mA cm^(-2)for the HER/OER,realizing an ultralow cell voltage of 1.52V@10 mA cm^(-2)for OWS and long-term durability at various current densities.This work provides a feasible approach to tuning the composition and structure of highefficiency electrocatalysts for the production of green hydrogen.
基金Project(1254G024)supported by the Young Core Instructor Foundation from Heilongjiang Educational Committee,ChinaProject(2012RFQXS113)supported by Scientific and Technological Innovation Talents of Harbin,China
文摘Both Ti foil and porous Ti were anodized in 0.5%HF and in ethylene glycol electrolyte containing 0.5%NH4F(mass fraction) separately. The results show that TiO2 nanotubes can be formed on Ti foil by both processes, whereas TiO2 nanotubes can be formed on porous Ti only in the second process. The overhigh current density led to the failure of the formation nanotubes on porous Ti in 0.5%HF electrolyte. TiO2 nanotubes were characterized by SEM and XRD. TiO2 nanotubes on porous Ti were thinner than those on Ti foil. Anatase was formed when TiO2 nanotubes were annealed at 400 °C and fully turned into rutile at 700 °C. To obtain good photodegradation, the optimal heat treatment temperature of TiO2 nanotubes was 450 °C. The porosity of the substrates influenced photodegradation properties. TiO2 nanotubes on porous Ti with 60% porosity had the best photodegradation.
文摘A novel titanium dioxide （TiO2） film comprising both nanotubes and nanopaticles was fabricated by an anodization process of the modified titanium. The local electric field at the anodized surface was simulated and its influence on the morphology of the TiO2 film was discussed. The results show that the electric field strength is enhanced by the covering. The growth rate of TiO2 increases with the assist of the local electric field. However, TiO2 dissolution is hindered since the local electric field prevents [TiF6]6- from diffusing. It means that the balance condition for the formation of nanotubes is broken, and TiO2 nanoparticles are formed. Moreover, the crystal structure of the TiO2 film was confirmed using X-ray diffraction and Raman analysis. The anatase is a main phase for the proposed film.
基金supported financially by the National Natural Science Foundation of China(Nos.51622106 and 51871049)the Fundamental Research Funds for the Central Universities(No.160708001).
文摘A layer of graphene(GR)particles was successfully deposited at the interface between Co(OH)2 nanoparticles and TiO2 nanotubes,aiming to improve the photoelectrochemical performance of the large-bandgap semiconductor TiO2.The obtained Co(OH)2/GR/TiO2 was extensively characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV–vis absorption spectra and photoluminescence(PL)emission spectra.Electrochemical impedance spectra,photogenerated potential-time(E-t),photocurrent density-time(i-t)and i-E curves and open circuit potential(OCP)curves were measured to investigate the photoelectrochemical activities and photogenerated cathodic protection properties.The results revealed that Co(OH)2/GR/TiO2 exhibits excellent photoelectrochemical and photogenerated cathodic performance due to synergistic effect between Co(OH)2 and graphene.Co(OH)2 and graphene co-modified TiO2 photoanode could provide an effective protection for 304 stainless steel(304 SS)in 3.5 wt%Na Cl solution for 12 h,which would be promising for future practical applications in the field of marine corrosion protection.
基金supported by the National Natural Science Foundation of China(Grant Nos.51672249,51802282,and 11804301)the Zhejiang Provincial Natural Science Foundation of China(Grant Nos.LQ17F040004 and LY17E020001)Fundamental Research Funds of Zhejiang Sci-Tech University(No.2019Q062)。
文摘Two-dimensional (2D) ultrathin MoS2-modified black Ti^3+-TiO2 nanotubes were fabricated using an electrospinning-hydrothermal treatment-reduction method.Bare TiO2 nanotubes were fabricated via electrospinning.Then,2D MoS2 lamellae were grown on the surface of the nanotubes and Ti^3+/Ov ions were introduced by reduction.The photocatalytic performance of the 2D MoS2/Ti^3+-TiO2 nanotubes was^15 times better than that of TiO2.The HER enhancement of the MoS2/Ti^3+-TiO2 nanotubes can be attributed to the Pt-like behavior of 2D MoS2 and the presence of Ti^3+-ions,which facilitated the quick diffusion of the photogenerated electrons to water,reducing the H2 activation barrier.The presence of Ov ions in the nanotubes and their hollow structure increased their solar utilization.
基金supported financially by the National Natural Science Foundation of China (Nos. 51001091, 111174256, 91233101)the Fundamental Research Program from the Ministry of Science and Technology of China (No. 2014CB931704)Project funded by China Postdoctoral Science Foundation(No. 2014M560602)
文摘Recent progress in nanoscience and nanotechnology creates new opportunities in the design of novel SnO2 nanomaterials for photocatalysis and photoelectrochemical. Herein, we firstly highlight a facile method to prepare threedimensional porous networks of ultra-long SnO2 nanotubes through the single capillary electrospinning technique.Compared with the traditional SnO2 nanofibers, the as-obtained three-dimensional porous networks show enhancement of photocurrent and photocatalytic activity, which could be ascribed to its improved light-harvesting efficiency and high separation efficiency of photogenerated electron–hole pairs. Besides, the synthesis route delivered three-dimensional sheets on the basis of interwoven nanofibrous networks, which can be readily recycled for the desirable circular application of a potent photocatalyst system.
基金This project was supported by the National Natural Science Foundation of China (20071010).
文摘The process, that the polycrystalline TiO2 powders were converted into TiO2 nanotubes, was observed with transmission electron microscope. The results obtained indicated that in concentrated NaOH aqueous solution, anisotropic swelling appears on the polycrystalline TiO2 granula at first, and then the nanotubes are formed.
基金supported by the Chinese Ministry of Science and Technology 973 Program(No. 2006CB705604)Science and Technology Commission of Shanghai Municipality(No.09XD 1401800)+1 种基金the National Natural Science Foundation(No.50578090)Shanghai Leading Academic Discipline Project(No.S30109)
文摘In this paper,the TiO_2 nanotubes were synthesized by hydrothermal method using a 10 mol/L NaOH aqueous solution at 150℃. The structure of prepared materials was characterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM）. scanning electron microscope（SEM） and Brunauer-Emmett-Teller（BET）.The prepared TiO_2 nanotubes were used to prepare thick film gas sensors and the gas sensing properties to various gases were tested.Results show the prepared TiO_2 nanotube gas sensors responses to ethanol under dry condition at 450℃.This could be attributed to the fact that it had high porous morphology and a higher pore volume,which can promote the diffusion of ethanol deep inside the films and improve the sensor response. Moreover,the gas sensor made with nanotubes exhibit high selective response towards ethanol gas compared with H_2,CO,acetone.
文摘TiO2 nanotube precursor was synthesized by the hydrothermal reaction of TiO2 powders with NaOH solution and the properties of the nanotube materials were tuned using different post-treatments. Transmission electron microscopic （TEM） observation revealed that the nanotube could be obtained by either a direct rinse with acid solution or rinse with distilled water followed by acid solution. The results of X-ray diffraction （XRD） and inductively coupled plasma （ICP） analysis indicated that the nanotube material was composed of H2Ti2O5·H2O. In addition, the photocatalytic activities of the resulting catalysts were found to be strongly dependent on the post-treatment. The results of the photocatalytic reaction showed that the degradation of Acid-red 3B dye fitted pseudo-zero-order kinetics and TiO2 nanotube prepared under direct rinse with acid solution exhibited a higher catalytic efficiency compared to other catalysts.
基金the financial support by the National Natural Science Foundation of China(No.21771137)the Key Project of Natural Science Foundation of Tianjin(No.18JCZDJC97200)+1 种基金the Training Project of Innovation Team of Colleges and Universities in Tianjin(No.TD13-5020)the start-up fund of Qilu University of Technology,Shandong Academy of Sciences。
文摘The high cost and low reserves of noble metals greatly hinder their practical applications in new energy production and conversion.The exploration of cost-effective alternative electrocatalysts with the ability to drive hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is extremely significant to promote overall water splitting.Herein,ultrathin CoSe2/CNTs nanocomposites have been synthesized by a facile two-step method,where the ultrathin Co-MOF(metal organic-framework)decorated with cable-like carbon nanotubes(CNTs)(Co-MOF/CNTs)was initially fabricated,and followed a lowtemperature selenization process.The ultrathin CoSe2 nanosheets as well as the superior conductivity of CNTs synergistically resulted in abundant active sites and enhanced conductivity to boost the electrocatalytic activity.The as-prepared CoSe2/CNTs electrocatalysts exhibited an overpotential of190 mV and 300 mV vs.reversible hydrogen electrode(RHE)at a current density of 10 mA/cm^(2) for the HER and OER in alkaline solution,respectively,and demonstrated superior durability.Furthermore,the as-prepared bifunctional CoSe2/CNTs electrocatalysts can act as cathode and anode in an electrolyzer,showing a cell voltage of 1.75 V at 10 mA/cm^(2) for overall water splitting.
基金the National Nature Science Foundation of China(21507085,21576162)Shanghai Sailing Program of China(14YF1401500)for financial support
文摘We report the development of a novel visible response BiVO_4/TiO_2(N_2) nanotubes photoanode for photoelectrocatalytic applications. The nitrogen-treated TiO_2 nanotube shows a high carrier concentration rate, thus resulting in a high efficient charge transportation and low electron–hole recombination in the TiO_2–BiVO_4. Therefore, the BiVO_4/TiO_2(N_2) NTs photoanode enabled with a significantly enhanced photocurrent of 2.73 mA cm^(-2)(at 1 V vs. Ag/Ag Cl) and a degradation efficiency in the oxidation of dyes under visible light. Field emission scanning electron microscopy, X-ray diffractometry, energy-dispersive X-ray spectrometer, and UV–Vis absorption spectrum were conducted to characterize the photoanode and demonstrated the presence of both metal oxides as a junction composite.
基金supported by the Ministry of Economic Affairs,Innovation,Digitalization and Energy of the State of North Rhine-Westphalia,W041A。
文摘CO_(2) methanation using nickel-based catalysts has attracted large interest as a promising power-to-gas route.Ni nanoparticles supported on nitrogen-doped CNTs with Ni loadings in the range from 10 wt% to 50 wt% were synthesized by impregnation,calcination and reduction and characterized by elemental analysis,X-ray powder diffraction,H_(2) temperature-programmed reduction,CO pulse chemisorption and transmission electron microscopy.The Ni/NCNT catalysts were highly active in CO_(2) methanation at atmospheric pressure,reaching over 50% CO_(2) conversion and over 95% CH_(4) selectivity at 340℃ and a GHSV of50,000 mL g^(-1) h^(-1) under kinetically controlled conditions.The small Ni particle sizes below 10 nm despite the high Ni loading is ascribed to the efficient anchoring on the N-doped CNTs.The optimum loading of 30 wt%-40 wt% Ni was found to result in the highest Ni surface area,the highest degree of conversion and the highest selectivity to methane.A constant TOF of 0.3 s^(-1) was obtained indicating similar catalytic properties of the Ni nanoparticles in the range from 10 wt%to 50 wt% Ni loading.Long-term experiments showed that the Ni/NCNT catalyst with 30 wt% Ni was highly stable for 100 h time on stream.
文摘Fe2O3@polypyrrole nanotubes （Fe2O3@PPy nanotubes） have been successfully prepared by in-situ polymerization of the pyrrole on the surface of Fe2O3 nanotubes （Fe2O3-NTs）, via using L-Lysine as modified surfactant. Hollow PPy nanotubes were also produced by dissolution of the Fe2O3 core from the core/shell composite nanotubes with 1 mol,L-1 HC1. Scanning electron microscopy（SEM）, transmission electron microscope （TEM）, selective-area electron diffraction （SAED）, X-ray powder diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared spectroscopy（FT-IR） confirmed the formation of Fe2O3-NTs and Fe2O3@PPy core/shell nanotubes. Its catalytic properties were investigated under the ultrasound. The results of UV-vis spectroscopy （UV） demonstrated Rhodamine B （RhB） can be efficiently degraded by Fe2O3 @PPy nanotubes.
基金Funded in Part by the Research Fund of Hubei Provincial Department of Education,China(No.Q20121102)
文摘Polyaniline （PANI） composite nanotubes （90-130 nm in diameter） containing titanium dioxide （TiO2） nanoparticles （about 10 nm in diameter） were synthesized through a self-assembly process in the presence of a-naphthalenesulfonic acid （a-NSA） as the dopant. It was found that PANI-TiO2 composites and PANI nanotubes both behaved with significant photocatalytic activities towards AZO dyes, during 2 h photocatalytic processes under natural light, the degradation ratio was 94.2% and 97.2% respectively （methyl orange and orange II）. The morphology of such products was characterized by SEM. The specific surface area of such composite nanotubes was 14.7 m2/g compared to normal polyaniline which was 0.27 m2/g. IR and X-ray diffraction characterizations showed that the chemical chain of the composite nanotubes was identical to that of the doped PANI. It may provide a new way for photodegradation of organic contaminants by using conjugated polymer with dimensional structure.
文摘IrO2 and IrRuOx(Ir:Ru 60:40 at%),supported by 50 wt%onto titania nanotubes(TNTs)and(3 at%Nb)Nb-doped titania nanotubes(Nb-TNTs),as electrocatalysts for the oxygen evolution reaction(OER),were synthesized and characterized by means of structural,surface analytical and electrochemical techniques.Nb doping of titania significantly increased the surface area of the support from 145(TNTs)to 260 m2g-1(Nb-TNTs),which was significantly higher than those of the Nb-doped titania supports previously reported in the literature.The surface analytical techniques showed good dispersion of the catalysts onto the supports.The X-ray photoelectron spectroscopy analyses showed that Nb was mainly in the form of Nb(IV)species,the suitable form to behave as a donor introducing free electrons to the conduction band of titania.The redox transitions of the cyclic voltammograms,in agreement with the XPS results,were found to be reversible.Despite the supported materials presented bigger crystallite sizes than the unsupported ones,the total number of active sites of the former was also higher due to their better catalyst dispersion.Considering the outer and the total charges of the cyclic voltammograms in the range 0.1–1.4 V,stability and electrode potentials at given current densities,the preferred catalyst was Ir O2 supported on the Nb-TNTs.The electrode potentials corresponding to given current densities were between the smallest ones given in the literature despite the small oxide loading used in this work and its Nb doping,thus making the Nb-TNTs-supported IrO2 catalyst a promising candidate for the OER.The good dispersion of IrO2,high specific surface area of the Nb-doped supports,accessibility of the electroactive centers,increased stability due to Nb doping and electron donor properties of the Nb(IV)oxide species were considered the main reasons for its good performance.
基金supported by National Natural Science Foundation of China(No50741003)Key Project of Science and Technology of Ministry of Education of China (No107066)Anhui Provincial Natural Science Foundation(No070414181)
文摘Silver matrix composite brushes were fabricated by means of powder metallurgy, which included pressing at 300 MPa and then sintering for 1 h in pure H2 protective atmosphere at 700 ℃ and repressing at 500 MPa. Four kinds composites with different compositions were produced, and the mechanical properties and electrical wear performance were investigated. The results showed that the composite added with carbon nanotubes had a higher hardness and strength, a lower contact voltage drop and an excellent anti-wear property in electrical sliding wear, because of the reinforcement ability of carbon nanotubes. Adding graphite to the composite also decreased the wear loss and contact voltage drop, because graphite had an electrical current conducting ability which not only made the current pass the lubricating films easily but also eliminated and reduced the arc and spark effectively.
基金supported by the National Natural Science Foundation of China(No.22165032 and 22265031)the Applied Basic Research Fund of Yunnan Province(No.2019FB129)the Major Science and Technology Project of Precious Metal Materials Genetic Engineering in Yunnan Province(No.2021102AB080019-2)。
文摘Microwave absorbing materials(MAMs)with wide effective absorption bandwidth(EAB)and low filling ratio are highly desirable for practical applications.Rational design in components and structures is one of the effective strategies to achieve MAMs with high performance.Herein,double-shelled hollow(DSH)polypyrrole(PPy)nanotubes were synthesized with hydrochloric acid(HCl)and sodium pstyrene sulfonate(SS)co-doping polymerization process using manganese dioxide(MnO_(2))nanorods as a self-sacrifice template.With the increase of HCl concentration,the 1D MnO_(2) core diminishes gradually to form the MnO_(2)@PPy coaxial nanostructures and finally the DSH PPy nanotube,which tunes the microwave absorption performance.Importantly,the DSH PPy nanotubes exhibit excellent microwave absorption of an optimal reflection loss of–50.4 dB and a wide EAB of 7.7 GHz with a low filling ratio of 5 wt%in a paraffin wax matrix.The excellent microwave absorption is believed to be mainly attributed to the enhanced synergistic effects of interfacial polarization and conduction loss arising from the unique DSH structure and the co-doping polymerization.
文摘As a preliminary investigation towards obtaining carbon nanotube composite adsorbent for CO2 capture, in this study CO2 adsorption performance of three commercial carbon nanotubes （CNTs） one single-walled carbon nanotubes （SWCNTs）, and two （2） different multi-walled carbon nanotubes （referred to as A-MWCNTs and B-MWCNTs） were evaluated and compared. The purpose of this study was to compare the different types of CNTs and select the best to serve as the solid anchor in the development of a hydrophobic composite adsorbent material for CO2 capture. The N2 physi- sorption of the CNTs was conducted to determine their surface area, pore volume and pore size. In addition, morphology and purity of the CNTs were checked with Transmission Electron Microscopy and Raman Spectroscopy, respectively. The CO2 adsorption capacity of the CNTs was evaluated using Thermo-gravimetric analysis （TGA） at 1.1 bar, at operating temperature ranged from 25 to 55 ~C and at different CO2 feed flow rates, in order to evaluate the effects of these variables on the CO2 adsorption capacity. The results of CO2 adsorption with the TGA show that CO2 adsorption capacity for both SWCNTs and MWCNTs was the highest at 25 ~C. Changing the CO2 flowrates had no significant effect on the adsorption capacity of MWCNTs, but decreasing the CO2 flow rate resulted in the enhancement of the CO2 adsorption capacity of SWCNTs. Overall, it was found that the SWCNTs displayed the highest CO2 adsorption capacity （29.97 gCO2/kg ad- sorbent） when compared to the MWCNTs （12.09 gCO2/kg adsorbent）, indicating a 150% increase in adsorption capacity over MWCNTs.
