Designing xerogels at the molecular level to overcome volume shrinkage is a promising strategy for carbon xerogels with desirable structure and performance.Here,we design a xerogel with non-shrinkage by introducing Zn...Designing xerogels at the molecular level to overcome volume shrinkage is a promising strategy for carbon xerogels with desirable structure and performance.Here,we design a xerogel with non-shrinkage by introducing ZnCl_(2) into resorcinol-melamine-formaldehyde polymerization.The gel network consisting of micrometer pores and large particles(0.26-1.35μm)is constructed by the coordination of Zn^(2+) with oxygen/nitrogen-containing groups,which is attributed to the structural support of the rigid triazine skeleton with large steric hindrance.Therefore,the reinforced gel network possesses enough strength to withstand capillary forces during atmospheric drying,and special drying and solvent exchange are avoided.The xerogels show non-shrinkage and a short preparation time of 24 h.The resulted activated carbon xerogels with interconnected hierarchically micro-meso-macropores exhibit an optimal specific surface area of 1520 m^(2)/g(through xerogels pyrolysis and the pore-forming of ZnCl_(2)),high adsorption(methylene blue,I-,Cu^(2+),etc.),and repeated adsorption ability.This work provides novel thought for porous nanomaterials with non-shrinkage and desirable structures in adsorption and energy storage.展开更多
Obtaining large specific surface areas(SSA)for carbon xerogels poses a significant challenge due to the inevitable volume shrinkage of xerogel.Here,the Zn^(2+) coordination-catalyzed in-situ polymerization approach wa...Obtaining large specific surface areas(SSA)for carbon xerogels poses a significant challenge due to the inevitable volume shrinkage of xerogel.Here,the Zn^(2+) coordination-catalyzed in-situ polymerization approach was proposed to fabricate xerogels with a low shrinkage of 13.03% and a short preparation period of 24 h.In resorcinolformaldehyde(RF)polymerization,ZnCl_(2) could accelerate the reaction kinetics through the coordination of the Zn^(2+) and hydroxyl groups.The gel network with adjustable RF particles(46.5 nm-1.89μm)and narrow neck structures was constructed by changing ZnCl_(2) and ethanol contents,which could resist volume shrinkage during atmospheric drying without solvent exchange.The activated carbon xerogels(ACXs)with hierarchical structure were designed by one-step carbonization/activation due to the pore-forming of ZnCl_(2).The obtained ACXs showed a large SSA of 1689 m^(2)/g,multi-dyes adsorption capacity(methylene blue,Congo red,methyl orange,and Sudan Ⅲ were 625.90,359.46,320.69,and 453.92 mg/g,respectively),and reusability of 100%.The maximum monolayer MB adsorption capacity was 630.28 mg/g.This work presents an efficient strategy to design porous nanomaterials with low shrinkage and large SSA,which illustrates promising applications in separation,adsorption,and photoelectric catalysis.展开更多
Self-healing(SH)polymer composites are a transformative achievement in polymer material technology that offers significant potential to extend the lifespan and reliability of materials.This work presents a novel appro...Self-healing(SH)polymer composites are a transformative achievement in polymer material technology that offers significant potential to extend the lifespan and reliability of materials.This work presents a novel approach to developing a hybrid natural-synthetic reinforced polymer composite with SH behavior using urea-free,non-toxic,environment-friendly material encapsulating resin,and hardener within a multicavity microcapsule(MC).This MC offers multiple healing because of its multicavity structure.These Xerogel MCs are integrated into hybrid bamboo/recycled glass fiber reinforced epoxy composite(25 wt% and 40 wt%)and were evaluated for their flexural strength,healing efficiency,moisture absorption,and thermal behavior.The results demonstrated that the composite containing 40 wt% exhibited the highest initial flexural strength and modulus retention after multiple healing cycles,approaching 80.67% and 61.34% respectively at 1st and 2nd cycles of healing efficiency.The behavior of self-healing hybrid composites(SHHC)in different environmental conditions was also investigated.Thermal Analysis TGA and DTA done on hybrid and other SH composites.Scanning electron microscopy shows the surface morphology of Xerogel MCs before and after damage,composite fractured surface,and how Healing Agent(HA)gets released and acquires surface after fracture.To ensure functional groups and chemical reactions between each component of the composite,FTIR analysis confirmed the successful encapsulation of HA inside MC.展开更多
The synthesis and properties of carbon xerogels are briefly described in this mini-review, emphasizing the methods used for tuning their surface chemistry and textural properties in order to design efficient electroca...The synthesis and properties of carbon xerogels are briefly described in this mini-review, emphasizing the methods used for tuning their surface chemistry and textural properties in order to design efficient electrocatalysts for fuel cells. In particular, the role played by the surface functional groups in determining the loading, dispersion, oxidation state and stability of the metal phases is addressed.展开更多
In the present study, sol-gel process is used to synthesize P-doped TiO2 xerogels by the cogelation method of a functionalized P alkoxide, (NH2-(CH2)2-NH-(CH2)2-P(O)-(OC2H5)2) with Ti(OC3H7)4 in either 2-methoxyethano...In the present study, sol-gel process is used to synthesize P-doped TiO2 xerogels by the cogelation method of a functionalized P alkoxide, (NH2-(CH2)2-NH-(CH2)2-P(O)-(OC2H5)2) with Ti(OC3H7)4 in either 2-methoxyethanol or isopropanol. The phosphorus-doping improved the thermal stability of titania and decreased the phase transformation of anatase into rutile. This modification by phosphorus shifted the absorption edge of titania to the visible region as proved by Diffuse reflectance measurements, and thus offers the possibility to produce visible light effective TiO2 photocatalyst. The excellent photocatalytic activity of P-doped TiO2 xerogels compared to pure TiO2 could be explained by its high surface area and small TiO2-anatase crystallite size. From these results, it was proved by using three different models that phosphorus intrinsically influences the photocatalytic activity.展开更多
Small angle X-ray scattering (SAXS) with synchrotron radiation as X-ray source has been used to study the structure of silica xerogels prepared by sol-gel process. Both the agreement of SAXS profiles with and the devi...Small angle X-ray scattering (SAXS) with synchrotron radiation as X-ray source has been used to study the structure of silica xerogels prepared by sol-gel process. Both the agreement of SAXS profiles with and the deviation from Porod’s law and Debye’s theory have been found, showing that there are differences between the structures of these xerogels. The specific surfaces of the samples whose SAXS profiles agreed with Porod’s law and Debye’s theory have been determined by analyzing SAXS data according to the methods of Porod and Debye, respectively, and the results of both methods used were found to be similar. We have proposed the corresponding Porod and Debye analysis methods to determine the specific surfaces of samples whose SAXS profiles do not agree with Porod’s law and Debye’s theory, i.e. the negative or positive deviation. The results of both methods used here were also found to be close to each other. The specific surfaces fell between approximately 80-150 m2/cm3 for the samples prepared展开更多
Enhancement in coercivity values of precursor powders of cobalt ferrite embedded in silica xerogel as well as polyaniline was observed using vibrating sample magnetometry. We compared the magnetic properties of pure p...Enhancement in coercivity values of precursor powders of cobalt ferrite embedded in silica xerogel as well as polyaniline was observed using vibrating sample magnetometry. We compared the magnetic properties of pure precursor powders of ferrite cobalt prepared by coprecipitation method and those embedded in xerogel and polyaniline matrix, prepared by sol-gel and by a conventional in situ chemical oxidation polymerization, respectively. The main magnetic effect is the altered coercivity value growing two magnitude orders for the precursor powders of cobalt ferrite embedded in silica xerogel and in polyaniline. The value goes from 52 Oe to 2200 Oe and 1054 Oe for pure coprecipitated precursor powder and embedded in silica xerogel, and embedded in polyaniline, respectively, without any heat-treatment.展开更多
Micro/nanostructured SiOx/C composite was firstly synthesized by carbothermal reduction of silica-carbon binary xerogel.The homogeneous dispersion feature of the two components in binary xerogel contributes to effecti...Micro/nanostructured SiOx/C composite was firstly synthesized by carbothermal reduction of silica-carbon binary xerogel.The homogeneous dispersion feature of the two components in binary xerogel contributes to effectively carbothermally reduce the O/Si atomic ratio,enhancing the electrochemical activity of the SiOx component.The micron-sized SiOx/C spheres are composed of many near-spherical nanoparticles.The synthesized SiOx/C exhibits a stable and high reversible capacity of 830 m A·h·g^-1 for 100 cycles,and excellent rate-capability.The homogeneous dispersion structure of phases,the micro/nanostructure and the high electrochemical activity of SiOx component combinedly contribute the excellent electrochemical performance.展开更多
TiO_2 nanoparticles(NPs)were prepared via the hydrothermal route of TiO_2 xerogel in nitric acid, hydrochloric acid and acetic acid. The physico-chemical properties of the powders were characterized by X-ray diffracti...TiO_2 nanoparticles(NPs)were prepared via the hydrothermal route of TiO_2 xerogel in nitric acid, hydrochloric acid and acetic acid. The physico-chemical properties of the powders were characterized by X-ray diffraction(XRD)and N_2 adsorption desorption techniques. The effects of the different acids on the structure(crystal phase)and texture(primary particle size and porosity)of the TiO_2 powders were explored. Results indicated that acetic acid facilitated the formation and stability of pure anatase phase. On the other hand, nitric acid and hydrochloric acid led to the transformation from anatase to rutile. The catalyst synthesized via the hydrothermal route of TiO_2 xerogel in the low concentration hydrochloric acid solution(Ti-HCl-0.15)had the highest photocatalytic activity than the catalysts obtained in the other two acid solutions. The effects of the different acids were discussed in terms of acid strength, chelating effect and the thermal stability of the adsorbed acidic anions.展开更多
Hydrogen peroxide(H_(2)O_(2))synthesis generally involves the energy-intensive anthraquinone process.Alternatively,electrochemical synthesis provides a green,economical,and environmentally friendly route to prepare H_...Hydrogen peroxide(H_(2)O_(2))synthesis generally involves the energy-intensive anthraquinone process.Alternatively,electrochemical synthesis provides a green,economical,and environmentally friendly route to prepare H_(2)O_(2) via the two-electron oxygen reduction reaction,but this process requires efficient catalysts with high activity and selectivity simultaneously.Here,we report an N,O co-doped carbon xerogel-based electrocatalyst(NO-CX)prepared by a simple and economical method.The NO-CX catalyst exhibits a high H_(2)O_(2) selectivity over 90%in a potential range of 0.2-0.6 V and a high H_(2)O_(2) production rate of 1410 mmol gcat^(-1) h^(-1).The density functional theory calculations demonstrate that the coupling effect between N and O can effectively induce the redistribution of surface charge and the edge carbon atom adjacent to an ether group and a graphite nitrogen atom is the active site.This work provides a straightforward and low-cost process to produce highly selective H_(2)O_(2) catalysts,which is in place for the expansion of electrocatalytic synthesis of useful chemicals.展开更多
Fe_(3)O_(4)magnetic xerogel composites were prepared by polycondensation of resorcinol(R)-formaldehyde reaction via a sol-gel process in an aqueous solution through varying the molar ratio of Fe_(3)O_(4)nanoparticles(...Fe_(3)O_(4)magnetic xerogel composites were prepared by polycondensation of resorcinol(R)-formaldehyde reaction via a sol-gel process in an aqueous solution through varying the molar ratio of Fe_(3)O_(4)nanoparticles(MNPs),catalyst(C),and water(W)content.MNPs were obtained by co-precipitation(MC),oxidation of iron salts(MO),or solvothermal synthesis(MS).Both MNPs and magnetic xerogels were examined regarding the performance of arsenic and fluoride removal in a batch system.The MC-based MNPs had higher adsorption capacities for both fluoride(202.9 mg/g)and arsenic(3.2 mg/g)than other MNPs in optimum conditions.The X-ray diffraction,Fourier transform infrared spectroscopy,and energy-dispersive X-ray spectroscopy confirmed that Fe was composed into the polymeric matrix of magnetic xerogels that contained 0.59%-4.42%of Fe with a molar ratio of MNPs(M)to R between 0.01 and 0.10.With low R/C and optimum M/R ratios,an increase in the surface area of magnetic xerogels affected the fluoride and arsenic adsorption capacities.The magnetic xerogel composites with the MC-based MNPs prepared at a fixed R/C ratio(100)and at different R/W(0.05-0.06)and M/R(0.07-0.10)ratios had a high arsenic removal efficiency of 100%at an As(V)concentration of 0.1 mg/L and pH of 3.0.The maximum adsorption capacities of magnetic xerogels were approximately five times higher than those of the xerogels without MNP composites.Therefore,Fe_(3)O_(4)nanoparticles enhanced the adsorption of arsenate and fluoride.The variations of alkaline catalyst and water content significantly affected the resulting properties of textural and surface chemistry of magnetic xerogel composites.展开更多
The procedure for preparing a new type of uniform and porous chitosan gel from citric acid medium is described. Its swelling behavior in different media was compared with those of the gels prepared by other methods. T...The procedure for preparing a new type of uniform and porous chitosan gel from citric acid medium is described. Its swelling behavior in different media was compared with those of the gels prepared by other methods. The ultrastructure of the xerogel prepared from citric acid was characterized using electron microscopy (SEM).展开更多
The photoluminescence （PL） characteristics of Eu^3＋ and Li^＋ co-doped ZnO PL materials against heat-treatment temperature were discussed. The PL xerogel and powder samples were prepared by solgel process. The emis...The photoluminescence （PL） characteristics of Eu^3＋ and Li^＋ co-doped ZnO PL materials against heat-treatment temperature were discussed. The PL xerogel and powder samples were prepared by solgel process. The emission spectra of all samples showed two broad bands peaking at 590 nm and 620 nm under UV-Vis excitation. But the relative intensity of red PL （620 nm） was much greater than that of green PL （590 nm） of the same sample, that s to say, the red color was the main luminescence. With heat-treatment temperature increase, the two kinds of colors PL intensity decreased, and both the red and green PL intensity of the xerogel samples was much greater than those of powder samples respectively. The XRD patterns revealed that Eu^3＋ ions were successfully incorporated in ZnO crystals in xerogel samples. When heat-treatment temperature reached 350 ℃, the Eu^3＋ began to separate out of the ZnO crystals and Eu2O3 crystals came into being. When the powder sample was subjected to UV-Vis excitation, the energy transfered from the host ZnO emission to Eu^3＋ became weaker than the xerogel sample.展开更多
Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide...Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.展开更多
A new blue photoluminescent material, a mixed tin and manganese oxide xerogel, is prepared via sol-hydrothermalgel process assisted by citric acid. The composition xerogel exhibits strong blue emission at room tempera...A new blue photoluminescent material, a mixed tin and manganese oxide xerogel, is prepared via sol-hydrothermalgel process assisted by citric acid. The composition xerogel exhibits strong blue emission at room temperature, with an emission maximum at 434 nm under short （234 nm） or long-wavelength （343 nm） ultraviolet excitation. The photoluminescent excitation spectrum of the mixed tin and manganese oxide xerogel, monitored at an intensity maximum wavelength of 434 nm of the emission, consists of two excitation peaks at 234 nm and 343 am. With heat treatment temperature increasing from 110 ℃ to 200 ℃, the blue emission intensity increases remarkably, whereas it is almost completely quenched after being treated at 300 ℃. The carbon impurities in the mixed tin and manganese oxide xerogel, confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, should be responsible for the bright blue photoluminescence.展开更多
The nanocomposite films were prepared by direct intercalation of poly(ethylene oxide) and PEO into MoO 3 xerogel via sol-gel route.The electrochromic behavior and the chemical conditions of Li + ions were investigat...The nanocomposite films were prepared by direct intercalation of poly(ethylene oxide) and PEO into MoO 3 xerogel via sol-gel route.The electrochromic behavior and the chemical conditions of Li + ions were investigated by cyclic voltammograms,UV-visible spectral transmittance and XPS.The results show that the cycling efficiency and the reversibility of insertion/extraction of Li + ions in (PEO) 1MoO 3·nH 2O nanocomposite film were improved.The intercalation of PEO into MoO 3 xerogel modulated the wavelength range of electrochromism and enhanced the electrochromic efficiency.Two different chemical conditions of Li + ions existing in the interlayer and interstitial positions of MoO 3 lattice were observed in MoO 3 xerogel and (PEO) 1MoO 3·nH 2O nanocomposite films.展开更多
The catalytically assisted self-propagating high-temperature synthesis of carbon fibrous nanostructures, where the iron-doped colloidal carbon xerogel is proposed as a catalyst system, was examined. The carbon xerogel...The catalytically assisted self-propagating high-temperature synthesis of carbon fibrous nanostructures, where the iron-doped colloidal carbon xerogel is proposed as a catalyst system, was examined. The carbon xerogel was prepared through carbonization of an iron doped organic xerogel at temperatures ranging from 600 to 1050℃. The reaction between calcium carbide and hexachloroethane in the presence of sodium azide is exothermic enough to proceed at a high temperature, self-sustaining regime. The combustion reactions of those mixtures enriched with iron-doped carbon xerogels were conducted in a stainless steel reactor---calorimetric bomb under an initial pressure of 1 MPa of argon. Scanning electron microscopy analysis of the combustion products revealed low yield of various type of carbon fibers （presumably nanotubes）, which grew via the tip-growth mechanism. The fibrous nanostructures were found in the vicinity of the spot of ignition, while in the outer and cooler area of the reactor, dusty products with soot-like morphology dominated. No significant correlation between the pyrolysis temperature of the carbon xerogel and the morphology of the obtained carbon fibrous nanostructures was observed.展开更多
Five different compositions of KxV2O5-nH2O （where prepared by the sol-gel process. Electrical conductiv x=0.00, 0.0017, 0.0049, 0.0064 and 0.0091 mol） were ty and thermoelectric power were measured parallel to the s...Five different compositions of KxV2O5-nH2O （where prepared by the sol-gel process. Electrical conductiv x=0.00, 0.0017, 0.0049, 0.0064 and 0.0091 mol） were ty and thermoelectric power were measured parallel to the substrate surface in the temperature range of 300-480 K. The electrical conductivity showed that all samples were semiconductors and that conductivity increased with increasing K content. The conductivity of the present system was primarily determined by hopping carrier mobility. The carrier density was evaluated as well. The conduction was confirmed to obey non-adiabatic small polaron hopping. The thermoelectric power or Seebeck effect, increased with increasing K ions content. The results obtained indicated that an n-type semiconducting behavior within the temperature range was investigated.展开更多
The electrochemical CO_(2) reduction reaction(CO_(2)RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogendoped c...The electrochemical CO_(2) reduction reaction(CO_(2)RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogendoped carbon xerogel(Cu-N-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO_(2)RR. The electrocatalytic performance of Cu-N-C materials is assessed by a rotating ring-disc electrode(RRDE), technique still rarely explored for CO_(2)RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-NC catalysts are found to be active and highly CO selective at low overpotentials(from -0.6 to -0.8 V vs.RHE) in 0.1 M KHCO_(3), while H_(2) from the competitive water reduction appears at larger overpotentials(-0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-N_(4) moieties exhibits a CO_(2)-to-CO turnover frequency of 997 h^(-1) at -0.9 V vs. RHE with a H_(2)/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO_(2)RR.展开更多
The nanocomposite films were prepared by poly(ethylene oxide), PEO, intercalation in V2O5 xero-gel in sol-gel. The synthesis and state of the films are investigated by the XRD, IR, SEM, etc. The results show that V2O5...The nanocomposite films were prepared by poly(ethylene oxide), PEO, intercalation in V2O5 xero-gel in sol-gel. The synthesis and state of the films are investigated by the XRD, IR, SEM, etc. The results show that V2O5, xerogel is a layered structure which arranges in c-direction. The mterlayer distance of V2O5 xerogel increases remarkably when PEO is intercalated in V2O5 xero-gel interlayer. PEO has strong interaction with V2O5 host. The surface of the films is homogeneous without holes and cracks.展开更多
基金supported by the National Key Research and Development Program of China(No.2023YFB3711501)the Shanghai Industrial Collaborative Innovation Leading Group Office(No.XTCX-KJ-2023-53)+3 种基金the Fundamental Research Funds for the Central Universities(No.23D110609)the Open Research Fund of Songshan Lake Materials Laboratory(No.2022SLABFN09)the Foundation of State Key Laboratory of Biobased Material and Green Paper-making,Qilu University of Technology,Shandong Academy of Sciences(No.GZKF202231)the Fundamental Research Funds for the Central Universities and Graduate Student Innovation Fund of Donghua University(No.CUSF-DH-d-2022012).
文摘Designing xerogels at the molecular level to overcome volume shrinkage is a promising strategy for carbon xerogels with desirable structure and performance.Here,we design a xerogel with non-shrinkage by introducing ZnCl_(2) into resorcinol-melamine-formaldehyde polymerization.The gel network consisting of micrometer pores and large particles(0.26-1.35μm)is constructed by the coordination of Zn^(2+) with oxygen/nitrogen-containing groups,which is attributed to the structural support of the rigid triazine skeleton with large steric hindrance.Therefore,the reinforced gel network possesses enough strength to withstand capillary forces during atmospheric drying,and special drying and solvent exchange are avoided.The xerogels show non-shrinkage and a short preparation time of 24 h.The resulted activated carbon xerogels with interconnected hierarchically micro-meso-macropores exhibit an optimal specific surface area of 1520 m^(2)/g(through xerogels pyrolysis and the pore-forming of ZnCl_(2)),high adsorption(methylene blue,I-,Cu^(2+),etc.),and repeated adsorption ability.This work provides novel thought for porous nanomaterials with non-shrinkage and desirable structures in adsorption and energy storage.
基金supported by the National Key Research and Development Program of China(No.2023YFB3711501)Shanghai Industrial Collaborative Innovation Leading Group Office(No.XTCX-KJ-2023-53)+3 种基金the Fundamental Research Funds for the Central Universities(No.23D110609)the Open Research Fund of Songshan Lake Materials Laboratory(No.2022SLABFN09)the Foundation of State Key Laboratory of Biobased Material and Green Papermaking,Qilu University of Technology,Shandong Academy of Sciences(No.GZKF202231)the Fundamental Research Funds for the Central Universities and Graduate Student Innovation Fund of Donghua University(No.CUSF-DH-D-2022012).
文摘Obtaining large specific surface areas(SSA)for carbon xerogels poses a significant challenge due to the inevitable volume shrinkage of xerogel.Here,the Zn^(2+) coordination-catalyzed in-situ polymerization approach was proposed to fabricate xerogels with a low shrinkage of 13.03% and a short preparation period of 24 h.In resorcinolformaldehyde(RF)polymerization,ZnCl_(2) could accelerate the reaction kinetics through the coordination of the Zn^(2+) and hydroxyl groups.The gel network with adjustable RF particles(46.5 nm-1.89μm)and narrow neck structures was constructed by changing ZnCl_(2) and ethanol contents,which could resist volume shrinkage during atmospheric drying without solvent exchange.The activated carbon xerogels(ACXs)with hierarchical structure were designed by one-step carbonization/activation due to the pore-forming of ZnCl_(2).The obtained ACXs showed a large SSA of 1689 m^(2)/g,multi-dyes adsorption capacity(methylene blue,Congo red,methyl orange,and Sudan Ⅲ were 625.90,359.46,320.69,and 453.92 mg/g,respectively),and reusability of 100%.The maximum monolayer MB adsorption capacity was 630.28 mg/g.This work presents an efficient strategy to design porous nanomaterials with low shrinkage and large SSA,which illustrates promising applications in separation,adsorption,and photoelectric catalysis.
文摘Self-healing(SH)polymer composites are a transformative achievement in polymer material technology that offers significant potential to extend the lifespan and reliability of materials.This work presents a novel approach to developing a hybrid natural-synthetic reinforced polymer composite with SH behavior using urea-free,non-toxic,environment-friendly material encapsulating resin,and hardener within a multicavity microcapsule(MC).This MC offers multiple healing because of its multicavity structure.These Xerogel MCs are integrated into hybrid bamboo/recycled glass fiber reinforced epoxy composite(25 wt% and 40 wt%)and were evaluated for their flexural strength,healing efficiency,moisture absorption,and thermal behavior.The results demonstrated that the composite containing 40 wt% exhibited the highest initial flexural strength and modulus retention after multiple healing cycles,approaching 80.67% and 61.34% respectively at 1st and 2nd cycles of healing efficiency.The behavior of self-healing hybrid composites(SHHC)in different environmental conditions was also investigated.Thermal Analysis TGA and DTA done on hybrid and other SH composites.Scanning electron microscopy shows the surface morphology of Xerogel MCs before and after damage,composite fractured surface,and how Healing Agent(HA)gets released and acquires surface after fracture.To ensure functional groups and chemical reactions between each component of the composite,FTIR analysis confirmed the successful encapsulation of HA inside MC.
基金supported by project PEstC/EQB/LA0020/2011 financed by FEDER through COMPETE-Programa Operacional Factores de CompetitividadeFCT-Fundao para a Ciência e a Tecnologia
文摘The synthesis and properties of carbon xerogels are briefly described in this mini-review, emphasizing the methods used for tuning their surface chemistry and textural properties in order to design efficient electrocatalysts for fuel cells. In particular, the role played by the surface functional groups in determining the loading, dispersion, oxidation state and stability of the metal phases is addressed.
文摘In the present study, sol-gel process is used to synthesize P-doped TiO2 xerogels by the cogelation method of a functionalized P alkoxide, (NH2-(CH2)2-NH-(CH2)2-P(O)-(OC2H5)2) with Ti(OC3H7)4 in either 2-methoxyethanol or isopropanol. The phosphorus-doping improved the thermal stability of titania and decreased the phase transformation of anatase into rutile. This modification by phosphorus shifted the absorption edge of titania to the visible region as proved by Diffuse reflectance measurements, and thus offers the possibility to produce visible light effective TiO2 photocatalyst. The excellent photocatalytic activity of P-doped TiO2 xerogels compared to pure TiO2 could be explained by its high surface area and small TiO2-anatase crystallite size. From these results, it was proved by using three different models that phosphorus intrinsically influences the photocatalytic activity.
文摘Small angle X-ray scattering (SAXS) with synchrotron radiation as X-ray source has been used to study the structure of silica xerogels prepared by sol-gel process. Both the agreement of SAXS profiles with and the deviation from Porod’s law and Debye’s theory have been found, showing that there are differences between the structures of these xerogels. The specific surfaces of the samples whose SAXS profiles agreed with Porod’s law and Debye’s theory have been determined by analyzing SAXS data according to the methods of Porod and Debye, respectively, and the results of both methods used were found to be similar. We have proposed the corresponding Porod and Debye analysis methods to determine the specific surfaces of samples whose SAXS profiles do not agree with Porod’s law and Debye’s theory, i.e. the negative or positive deviation. The results of both methods used here were also found to be close to each other. The specific surfaces fell between approximately 80-150 m2/cm3 for the samples prepared
文摘Enhancement in coercivity values of precursor powders of cobalt ferrite embedded in silica xerogel as well as polyaniline was observed using vibrating sample magnetometry. We compared the magnetic properties of pure precursor powders of ferrite cobalt prepared by coprecipitation method and those embedded in xerogel and polyaniline matrix, prepared by sol-gel and by a conventional in situ chemical oxidation polymerization, respectively. The main magnetic effect is the altered coercivity value growing two magnitude orders for the precursor powders of cobalt ferrite embedded in silica xerogel and in polyaniline. The value goes from 52 Oe to 2200 Oe and 1054 Oe for pure coprecipitated precursor powder and embedded in silica xerogel, and embedded in polyaniline, respectively, without any heat-treatment.
基金supported by the National Natural Science Foundation of China(51602313 and 51764008)Science and Technology Project of Guizhou Province(Qiankehe No.2016,7439).
文摘Micro/nanostructured SiOx/C composite was firstly synthesized by carbothermal reduction of silica-carbon binary xerogel.The homogeneous dispersion feature of the two components in binary xerogel contributes to effectively carbothermally reduce the O/Si atomic ratio,enhancing the electrochemical activity of the SiOx component.The micron-sized SiOx/C spheres are composed of many near-spherical nanoparticles.The synthesized SiOx/C exhibits a stable and high reversible capacity of 830 m A·h·g^-1 for 100 cycles,and excellent rate-capability.The homogeneous dispersion structure of phases,the micro/nanostructure and the high electrochemical activity of SiOx component combinedly contribute the excellent electrochemical performance.
基金Supported by the National Basic Research Program of China("973"Program,No.2014CB239300,No.2012CB720100)National Natural Science Foundation of China(No.21406164,No.21466035)
文摘TiO_2 nanoparticles(NPs)were prepared via the hydrothermal route of TiO_2 xerogel in nitric acid, hydrochloric acid and acetic acid. The physico-chemical properties of the powders were characterized by X-ray diffraction(XRD)and N_2 adsorption desorption techniques. The effects of the different acids on the structure(crystal phase)and texture(primary particle size and porosity)of the TiO_2 powders were explored. Results indicated that acetic acid facilitated the formation and stability of pure anatase phase. On the other hand, nitric acid and hydrochloric acid led to the transformation from anatase to rutile. The catalyst synthesized via the hydrothermal route of TiO_2 xerogel in the low concentration hydrochloric acid solution(Ti-HCl-0.15)had the highest photocatalytic activity than the catalysts obtained in the other two acid solutions. The effects of the different acids were discussed in terms of acid strength, chelating effect and the thermal stability of the adsorbed acidic anions.
基金the National Natural Science Foundation of China(No.52073020)the China Postdoctoral Science Foundation Funded Project(No.2021M690801).
文摘Hydrogen peroxide(H_(2)O_(2))synthesis generally involves the energy-intensive anthraquinone process.Alternatively,electrochemical synthesis provides a green,economical,and environmentally friendly route to prepare H_(2)O_(2) via the two-electron oxygen reduction reaction,but this process requires efficient catalysts with high activity and selectivity simultaneously.Here,we report an N,O co-doped carbon xerogel-based electrocatalyst(NO-CX)prepared by a simple and economical method.The NO-CX catalyst exhibits a high H_(2)O_(2) selectivity over 90%in a potential range of 0.2-0.6 V and a high H_(2)O_(2) production rate of 1410 mmol gcat^(-1) h^(-1).The density functional theory calculations demonstrate that the coupling effect between N and O can effectively induce the redistribution of surface charge and the edge carbon atom adjacent to an ether group and a graphite nitrogen atom is the active site.This work provides a straightforward and low-cost process to produce highly selective H_(2)O_(2) catalysts,which is in place for the expansion of electrocatalytic synthesis of useful chemicals.
基金supported by the Mexican Institute of Water Technology(Grant No.DP2101.1)the Catedras-CONACyT Program of the National Council of Science and Technology(Project No.159).
文摘Fe_(3)O_(4)magnetic xerogel composites were prepared by polycondensation of resorcinol(R)-formaldehyde reaction via a sol-gel process in an aqueous solution through varying the molar ratio of Fe_(3)O_(4)nanoparticles(MNPs),catalyst(C),and water(W)content.MNPs were obtained by co-precipitation(MC),oxidation of iron salts(MO),or solvothermal synthesis(MS).Both MNPs and magnetic xerogels were examined regarding the performance of arsenic and fluoride removal in a batch system.The MC-based MNPs had higher adsorption capacities for both fluoride(202.9 mg/g)and arsenic(3.2 mg/g)than other MNPs in optimum conditions.The X-ray diffraction,Fourier transform infrared spectroscopy,and energy-dispersive X-ray spectroscopy confirmed that Fe was composed into the polymeric matrix of magnetic xerogels that contained 0.59%-4.42%of Fe with a molar ratio of MNPs(M)to R between 0.01 and 0.10.With low R/C and optimum M/R ratios,an increase in the surface area of magnetic xerogels affected the fluoride and arsenic adsorption capacities.The magnetic xerogel composites with the MC-based MNPs prepared at a fixed R/C ratio(100)and at different R/W(0.05-0.06)and M/R(0.07-0.10)ratios had a high arsenic removal efficiency of 100%at an As(V)concentration of 0.1 mg/L and pH of 3.0.The maximum adsorption capacities of magnetic xerogels were approximately five times higher than those of the xerogels without MNP composites.Therefore,Fe_(3)O_(4)nanoparticles enhanced the adsorption of arsenate and fluoride.The variations of alkaline catalyst and water content significantly affected the resulting properties of textural and surface chemistry of magnetic xerogel composites.
基金Sponsored by a Girant-in-Aid from the Ministry of Education of China.
文摘The procedure for preparing a new type of uniform and porous chitosan gel from citric acid medium is described. Its swelling behavior in different media was compared with those of the gels prepared by other methods. The ultrastructure of the xerogel prepared from citric acid was characterized using electron microscopy (SEM).
基金the National Defense Foundation Research Item of China(No.K 1203061109)
文摘The photoluminescence （PL） characteristics of Eu^3＋ and Li^＋ co-doped ZnO PL materials against heat-treatment temperature were discussed. The PL xerogel and powder samples were prepared by solgel process. The emission spectra of all samples showed two broad bands peaking at 590 nm and 620 nm under UV-Vis excitation. But the relative intensity of red PL （620 nm） was much greater than that of green PL （590 nm） of the same sample, that s to say, the red color was the main luminescence. With heat-treatment temperature increase, the two kinds of colors PL intensity decreased, and both the red and green PL intensity of the xerogel samples was much greater than those of powder samples respectively. The XRD patterns revealed that Eu^3＋ ions were successfully incorporated in ZnO crystals in xerogel samples. When heat-treatment temperature reached 350 ℃, the Eu^3＋ began to separate out of the ZnO crystals and Eu2O3 crystals came into being. When the powder sample was subjected to UV-Vis excitation, the energy transfered from the host ZnO emission to Eu^3＋ became weaker than the xerogel sample.
文摘Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10904008)Joint Funds of the National Natural Science Foundation of China (Grant No. 11076008)the Young Scientists Foundation of Sichuan Province of China(Grant No. 2010JQ0006)
文摘A new blue photoluminescent material, a mixed tin and manganese oxide xerogel, is prepared via sol-hydrothermalgel process assisted by citric acid. The composition xerogel exhibits strong blue emission at room temperature, with an emission maximum at 434 nm under short （234 nm） or long-wavelength （343 nm） ultraviolet excitation. The photoluminescent excitation spectrum of the mixed tin and manganese oxide xerogel, monitored at an intensity maximum wavelength of 434 nm of the emission, consists of two excitation peaks at 234 nm and 343 am. With heat treatment temperature increasing from 110 ℃ to 200 ℃, the blue emission intensity increases remarkably, whereas it is almost completely quenched after being treated at 300 ℃. The carbon impurities in the mixed tin and manganese oxide xerogel, confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, should be responsible for the bright blue photoluminescence.
文摘The nanocomposite films were prepared by direct intercalation of poly(ethylene oxide) and PEO into MoO 3 xerogel via sol-gel route.The electrochromic behavior and the chemical conditions of Li + ions were investigated by cyclic voltammograms,UV-visible spectral transmittance and XPS.The results show that the cycling efficiency and the reversibility of insertion/extraction of Li + ions in (PEO) 1MoO 3·nH 2O nanocomposite film were improved.The intercalation of PEO into MoO 3 xerogel modulated the wavelength range of electrochromism and enhanced the electrochromic efficiency.Two different chemical conditions of Li + ions existing in the interlayer and interstitial positions of MoO 3 lattice were observed in MoO 3 xerogel and (PEO) 1MoO 3·nH 2O nanocomposite films.
基金supported by the internal grant of the Faculty of Advanced Technology and Chemistry, MUT(No. GW-08-977)
文摘The catalytically assisted self-propagating high-temperature synthesis of carbon fibrous nanostructures, where the iron-doped colloidal carbon xerogel is proposed as a catalyst system, was examined. The carbon xerogel was prepared through carbonization of an iron doped organic xerogel at temperatures ranging from 600 to 1050℃. The reaction between calcium carbide and hexachloroethane in the presence of sodium azide is exothermic enough to proceed at a high temperature, self-sustaining regime. The combustion reactions of those mixtures enriched with iron-doped carbon xerogels were conducted in a stainless steel reactor---calorimetric bomb under an initial pressure of 1 MPa of argon. Scanning electron microscopy analysis of the combustion products revealed low yield of various type of carbon fibers （presumably nanotubes）, which grew via the tip-growth mechanism. The fibrous nanostructures were found in the vicinity of the spot of ignition, while in the outer and cooler area of the reactor, dusty products with soot-like morphology dominated. No significant correlation between the pyrolysis temperature of the carbon xerogel and the morphology of the obtained carbon fibrous nanostructures was observed.
文摘Five different compositions of KxV2O5-nH2O （where prepared by the sol-gel process. Electrical conductiv x=0.00, 0.0017, 0.0049, 0.0064 and 0.0091 mol） were ty and thermoelectric power were measured parallel to the substrate surface in the temperature range of 300-480 K. The electrical conductivity showed that all samples were semiconductors and that conductivity increased with increasing K content. The conductivity of the present system was primarily determined by hopping carrier mobility. The carrier density was evaluated as well. The conduction was confirmed to obey non-adiabatic small polaron hopping. The thermoelectric power or Seebeck effect, increased with increasing K ions content. The results obtained indicated that an n-type semiconducting behavior within the temperature range was investigated.
基金Grant PID2020-115848RB-C21 "STORELEC" projectTED2021-129694B-C22 "DEFY-CO2" project funded by MCIN/AEI/10.13039/501100011033+3 种基金LMP253_ (2)1 project funded by Gobierno de AragónGrant IJC2019-041874-I funded by the MCIN/AEI/10.13039/501100011033CSIC for her JAE Intro ICU 2021-ICB-04 grantthe Y2020/EMT-6419 "CEOTRES" project funded by the Comunidad Autonoma de Madrid。
文摘The electrochemical CO_(2) reduction reaction(CO_(2)RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogendoped carbon xerogel(Cu-N-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO_(2)RR. The electrocatalytic performance of Cu-N-C materials is assessed by a rotating ring-disc electrode(RRDE), technique still rarely explored for CO_(2)RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-NC catalysts are found to be active and highly CO selective at low overpotentials(from -0.6 to -0.8 V vs.RHE) in 0.1 M KHCO_(3), while H_(2) from the competitive water reduction appears at larger overpotentials(-0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-N_(4) moieties exhibits a CO_(2)-to-CO turnover frequency of 997 h^(-1) at -0.9 V vs. RHE with a H_(2)/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO_(2)RR.
基金This project was supported by National Natural Science Foundation of China (Grant No.59802009 ) and Hubei Province Natural Science Foundation(Grant No. 99J053).
文摘The nanocomposite films were prepared by poly(ethylene oxide), PEO, intercalation in V2O5 xero-gel in sol-gel. The synthesis and state of the films are investigated by the XRD, IR, SEM, etc. The results show that V2O5, xerogel is a layered structure which arranges in c-direction. The mterlayer distance of V2O5 xerogel increases remarkably when PEO is intercalated in V2O5 xero-gel interlayer. PEO has strong interaction with V2O5 host. The surface of the films is homogeneous without holes and cracks.
