A double-parabola monocapillary(DPM)was designed for laboratory x-ray sources,and its performance was evaluated through numerical simulations and experimental validation.A surface shape error model was developed to ch...A double-parabola monocapillary(DPM)was designed for laboratory x-ray sources,and its performance was evaluated through numerical simulations and experimental validation.A surface shape error model was developed to characterize the DPM surface profile,and ray-tracing methods were used to simulate key properties such as focal spot size,divergence,and transmission efficiency.The simulation results closely matched experimental measurements,validating the proposed model.This surface shape error simulation provides an efficient method for evaluating the impact of slope errors on DPM performance,offering insights for optimal design and precision manufacturing.展开更多
Flat-panel X-ray sources(FPXSs)have many advantages in terms of compactness and low-dose imaging,enhancing their capability for novel X-ray applications.Experimental analysis of the X-ray characteristics and optimizin...Flat-panel X-ray sources(FPXSs)have many advantages in terms of compactness and low-dose imaging,enhancing their capability for novel X-ray applications.Experimental analysis of the X-ray characteristics and optimizing the anode panel of an FPXS are time-consuming,expensive,and sometimes impractical.In this study,a FPXS was prepared using a ZnO nanowire cold cathode and a molybdenum film anode target.Monte Carlo(MC)simulations were utilized to optimize the anode panel and obtain the average fluence,average energy,and spatial distribution of the X-rays for the ZnO nanowire FPXS.The accuracy of the MC simulations was verified by comparing the measured and simulated energy spectra.Optimization of the anode target considers the material,thickness,and morphology,whereas optimization of the substrate focuses on the material and thickness.The results show that the difference between the positions of the K-shell peaks in the measured and simulated energy spectra is within 0.26 keV.At the acceleration voltages of 30 kV,60 kV,and 90 kV,the optimal thicknesses of the tungsten array anode were 0.65μm,2.45μm,and 5μm,respectively,while the molybdenum array anode has the optimal thicknesses of 1.45μm,5.25μm,and 24μm,respectively.The microsemi-ellipsoidal anode with a recessed design showed a 5%increase in the transmitted X-ray fluence compared with the film target.The sapphire substrate with a thickness of 0.78 mm exhibits a mechanical strength comparable to that of a glass substrate with a thickness of 3 mm,implying that the former can increase the average X-ray fluence by reducing the filtration of X-rays.The findings of this study provide valuable guidance for the fabrication and optimization of the ZnO nanowire FPXS.展开更多
The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and res...The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in FPXS.The conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection calculations.However,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in FPXS.This study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)simulator.The two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the phantom.Imaging-system modeling was performed by modeling the FPXS,imaging geometry,and detector.The gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence map.The entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were calculated.The accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation time.The results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.展开更多
Energy spectra, angular distributions, and temporal profiles of the photons produced by an all-optical Thomson scat- tering X-ray source are explored through numerical simulations based on the parameters of the SILEX-...Energy spectra, angular distributions, and temporal profiles of the photons produced by an all-optical Thomson scat- tering X-ray source are explored through numerical simulations based on the parameters of the SILEX-I laser system （800 nm, 30 fs, 300 TW） and the previous wakefield acceleration experimental results. The simulation results show that X-ray pulses with a duration of 30 fs and an emission angle of 50 mrad can be produced from such a source. Using the optimized electron parameters, X-ray pulses with better directivity and narrower energy spectra can be obtained. Besides the electron parameters, the laser parameters such as the wavelength, pulse duration, and spot size also affect the X-ray yield, the angular distribution, and the maximum photon energy, except the X-ray pulse duration which is slightly changed for the case of ultrafast laser-electron interaction.展开更多
The stochastic extended finite-fault simulation method(EXSIM)is a widely used tool in seismological research,with applications in ground motion prediction and simulation,seismic hazard analysis,and engineering studies...The stochastic extended finite-fault simulation method(EXSIM)is a widely used tool in seismological research,with applications in ground motion prediction and simulation,seismic hazard analysis,and engineering studies.However,recent studies have revealed a significant limitation:EXSIM tends to overpredict ground motions in the low-to-intermediate frequency range,particularly for large thrust earthquakes that are often characterized by a double-corner-frequency source model.To address this issue and enhance simulation accuracy,this study introduces two key improvements:(1)a novel asperity-distributed stress-drop composite fault model and(2)a hybrid application of EXSIM with the composite fault model.The proposed method is validated through its application to the 2013 M_(w)6.7 Lushan earthquake that occurred in China and six thrust earthquakes with an M_(w)≥6.5 in Japan.By comparing the simulated ground motions with recorded data,the results demonstrate that the improved method achieves consistent accuracy across the high-and low-frequency spectrum(combined goodness-of-fit:CGOF<0.35).This study significantly broadens the applicability of stochastic finite-fault simulations,enabling more reliable predictions for a wider range of seismic scenarios,including complex thrust faulting events.展开更多
By considering the heterogeneity of geomechanical materials, the source development of earthquake under compression boundary conditions is studied with a newly developed numerical method, Rock Failure Process Analysis...By considering the heterogeneity of geomechanical materials, the source development of earthquake under compression boundary conditions is studied with a newly developed numerical method, Rock Failure Process Analysis code (RFPA2D). The process of fault forming and associated micro seismicities in a rectangle area with a inclusion but without any clear structural features of original fault is modeled. The modeling demonstrates the whole process of source development of earthquake from deformation, micro failure to collapse and the behavior of temporal spatial distribution of micro seismicities. The stress, strain and the temporal spatial distribution of micro seismicities vividly depict the phenomena of localization, temporal transitions, dilatation or rise, elastic rebound and conjugate (X type) deformation zone.展开更多
Aimed at unbalance of soil temperature field of ground source heat pump system, solar aided energy storage system was established. In solar assisted ground-source heat pump (SAGSHP) system with soil storage, solar ene...Aimed at unbalance of soil temperature field of ground source heat pump system, solar aided energy storage system was established. In solar assisted ground-source heat pump (SAGSHP) system with soil storage, solar energy collected in three seasons was stored in the soil by vertical U type soil exchangers. The heat abstracted by the ground-source heat pump and collected by the solar collector was employed to heating. Some of the soil heat exchangers were used to store solar energy in the soil so as to be used in next winter after this heating period; and the others were used to extract cooling energy directly in the soil by circulation pump for air conditioning in summer. After that solar energy began to be stored in the soil and ended before heating period. Three dimensional dynamic numerical simulations were built for soil and soil heat exchanger through finite element method. Simulation was done in different strata month by month. Variation and restoration of soil temperature were studied. Economy and reliability of long term SAGSHP system were revealed. It can be seen that soil temperature is about 3 ℃ higher than the original one after one year's running. It is beneficial for the system to operate for long period.展开更多
Since programing complex and dynamic heat source model for welding simulation is a complex job,the parametric methods are studied in this paper.Firstly,an overall flow to achieve automatically modeling welding was int...Since programing complex and dynamic heat source model for welding simulation is a complex job,the parametric methods are studied in this paper.Firstly,an overall flow to achieve automatically modeling welding was introduced.Secondly,an expert module rule for selecting welding heat source model was founded,which is based on simulation knowledge and experiences.Thirdly,a modularity routine method was investigated using writing with C++programing,which automatically creates subroutines of 3D dynamic heat source model for user.To realize the dynamic weld path,the local weld path coordinate system was moved in the global coordinate system and it is used to model the direction of weld gun,welding path and welding pose.The weld path data file was prepared by the automatic tool for the welding heat source subroutines.All above functions were integrated in the user interface and the connection with architecture was introduced.At last,a laser beam welding heat source modeling was automatically modeled and the weld pool geometry was compared with the reported literature.It demonstrated that the automated tool is valid for welding simulation.Since modeling became convenient for welding simulation using the tool proposed,it could be easy and useful for welding engineers to acquire the needed information.展开更多
Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed...Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.展开更多
The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is ...The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.展开更多
Gaseous hydrocarbon geochemistry research through a thermal simulation experiment in combination with the natural evolution process in which natural gases were formed from coal-measure source rocks revealed that the {...Gaseous hydrocarbon geochemistry research through a thermal simulation experiment in combination with the natural evolution process in which natural gases were formed from coal-measure source rocks revealed that the {δ{}+{13}C-1} values of methane vary from light to heavy along with the increase of thermal evolution degree of coal-measure source rocks, and the {δ{}+{13}C-2} values of ethane range from {-28.3‰} to {-20‰} (PDB). {δ{}+{13}C-2} value was {-28‰±} (R-O={0.45%}-{0.65%}) at the lower thermal evolution stage of coal-measure source rocks. After the rocks entered the main hydrocarbon-generating stage (R-O={0.65%}-{1.50%}), {δ{}+{13}C-2} values generally varied within the range of {-26‰}-{-23‰±}; with further thermal evolution of the rocks the carbon isotopes of ethane became heavier and heavier, but generally less than -20‰.; The partial carbon isotope sequence inversion of hydrogen gases is a characteristic feature of mixing of natural gases of different origins. Under the condition of specially designated type of organic matter, hydrogen source rocks may show this phenomenon via their own evolution.; In the lower evolution stages of the rocks, it is mainly determined by organic precursors that gaseous hydrocarbons display partial inversion of the carbon isotope sequence and the carbon isotopic values of ethane are relatively low. These characteristic features also are related to the geochemical composition of primary soluble organic matter.展开更多
Historical mining activities often lead to continuing wide spread contaminants in both groundwater and surface water in previously operational mine site areas. The contamination may continue for many years after closi...Historical mining activities often lead to continuing wide spread contaminants in both groundwater and surface water in previously operational mine site areas. The contamination may continue for many years after closing down the mining activities. The essential first step for sustainable management of groundwater and development of remediation strategies is the unknown contaminant source characterization. In a mining site, there are multiple species of contaminants involving complex geochemical processes. It is difficult to identify the potential sources and pathways incorporating the chemically reactive multiple species of contaminants making the source characterization process more challenging. To address this issue, a reactive transport simulation model PHT3D is linked to a Simulated Annealing based the optimum decision model. The numerical simulation model PHT3D is utilized for numerically simulating the reactive transport process involving multiple species in the former mine site area. The simulation results from the calibrated PHT3D model are illustrated, with and without incorporating the chemical reactions. These comparisons show the utility of using a reactive, geochemical transport process’ simulation model. Performance evaluation of the linked simulation optimization methodology is evaluated for a contamination scenario in a former mine site in Queensland, Australia. These performance evaluation results illustrate the applicability of linked simulation optimization model to identify the source characteristics while using PHT3D as a numerical reactive chemical species’ transport simulation model for the hydro-geochemically complex aquifer study area.展开更多
According to the precursory data of the 1976 Tangshan earthquake( M =7.8), and combining with the research results of rock fracture, seismic source, tectonics, seismic precursors, dynamic condition and crust structu...According to the precursory data of the 1976 Tangshan earthquake( M =7.8), and combining with the research results of rock fracture, seismic source, tectonics, seismic precursors, dynamic condition and crust structure, the seismogenic process of Tangshan earthquake has been numerically simulated by using the model of water saturated porous medium with a rhombic hard inclusion. First, a system of seismogenic dynamics equations of solid liquid two phase medium has been set up under considering rock inelastic dilation, strain softening and pore water permeation. Then, the finite difference method to solve the equation system in incremental form has been presented. Finally, the seismogenic process of Tangshan earthquake and the temporal spatial characteristics of its precursors have been numerically simulated when the hard inclusion includes a soft fault belt. The numerically simulating result shows that the development of Tangshan earthquake mainly undergoes following processes: elastic accumulation, early inelastic cubic dilation, accelerative softening (failure and creep) of fault first time, inelastic dilation twice in Tianjin—Ninghe area, accelerative softening of fault twice and instability. Corresponding to the fault accelerative softening, elastic recovery and inelastic dilation twice in some parts of seismogenic medium. By comparing with the data of precursory observation, ones can find the preceding simulating result explains the varied characters of practical data better. Meanwhile, the numerical simulation further displays the temporal spatial change law and complex patterns of the field of Tangshan earthquake development as well. It makes a base study for the physical mechanism of change of the seismic precursory field.展开更多
The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resol...The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resolution of seismic data, and free boundary can cause surface wave. Considering the above problems, we focus on the Rayleigh wavefields simulation using finite-difference wave equation of higher-order staggered grids and PML boundary conditions. Free boundary, buried source and overlying low velocity layer are taken into consideration and point explosion source is adopted. Through some numerical simulation with different parameters, we quantitatively analyze relationship between wave intensity and source depth, as well as the energy variation with propagation and obtain some practical knowledge and conclusions.展开更多
A wide range of welding and surface treatment processes involve the use of a heat source which is moving at a constant speed over the component. The numerical simulation of such processes implies a transient analysis ...A wide range of welding and surface treatment processes involve the use of a heat source which is moving at a constant speed over the component. The numerical simulation of such processes implies a transient analysis using a very refined mesh in order to follow properly the path of the heat source. The 3D-mesh size can be very large if one consider the welds length or the heat-treated surface size in industrial components. To reduce the computational time to acceptable values, several techniques have been investigated. The first type is to use analytical methods such as Rosenthal equations. The second type of solutions consists in performing a transient analysis using adaptive meshing. But, for a large proportion of the involved processes, practical experience demonstrates the existence of quasi steady state conditions over the major part of the heat source path. Numerical algorithms have therefore been developed to directly compute the steady temperature, metallurgical phase proportion and stress distributions. This paper gives a general overview of the different numerical methods used to simulate welding and surface treatment processes with a special emphasis on the steady state calculation. The benefits and limitations of each of them are discussed and applications are presented.展开更多
This paper briefly reviews the characteristics and major processes of the explicit finite element method in modeling the near-fault ground motion field. The emphasis is on the finite element-related problems in the fi...This paper briefly reviews the characteristics and major processes of the explicit finite element method in modeling the near-fault ground motion field. The emphasis is on the finite element-related problems in the finite fault source modeling. A modified kinematic source model is presented, in which vibration with some high frequency components is introduced into the traditional slip time function to ensure that the source and ground motion include sufficient high frequency components. The model presented is verified through a simple modeling example. It is shown that the predicted near-fault ground motion field exhibits similar characteristics to those observed in strong motion records, such as the hanging wall effect, vertical effect, fling step effect and velocity pulse effect, etc.展开更多
A systematic research on the electron deposition process in the JAEA 10 A ion source is carried out by using a particle-in-cell/Monte Carlo collision simulation, which is based on a full three-dimensional self-develop...A systematic research on the electron deposition process in the JAEA 10 A ion source is carried out by using a particle-in-cell/Monte Carlo collision simulation, which is based on a full three-dimensional self-developed code. Two parts are studied. One is the space and energy distribution of fast and slow electrons, the other is the vibration excitation collisions between electrons and hydrogen moleculars. The results show that the inhomogeneity of electrons comes from the Y direction drift of the fast electrons （Te ≥25 eV） due to the action of the magnetic fields. This drift also increases the number of vibration excitation collisions in the -Y direction, and results in the increase of Ha in the -Y direction, eventually leading to the -Y drift of H^-. It explains the spatial non-uniformity in the JAEA 10 A ion source.展开更多
Marine spark sources are widely used in high-resolution marine seismic surveys.The characteristic of a wavelet is a critical part in seismic exploration;thus,the formation and numerical simulation of spark source wave...Marine spark sources are widely used in high-resolution marine seismic surveys.The characteristic of a wavelet is a critical part in seismic exploration;thus,the formation and numerical simulation of spark source wavelets should be explored.In studies on spark source excitation,the acoustic field generated by the interaction between bubbles constitutes the near-field wavelet of a source.Therefore,this interaction should be revealed by studying complex multibubble motion laws.In this study,actual discharge conditions were combined to derive the multibubble equation of motion.Energy conservation,ideal gas equation,and environmental factors in the discharge of spark source wavelets were studied,and the simulation method of an ocean spark source wavelet was established.The accuracy of the simulation calculation method was verified through a comparison of indoor-measured signals using three electrodes and the spark source wavelet obtained in the field.Results revealed that the accuracy of the model is related to the number of electrodes.The fewer the number of electrodes used,the lower will be the model's accuracy.This finding is attributed to the statistical hypothesis factor introduced to eliminate the coupling term of the interaction of the multibubble motion equation.This study presents a method for analyzing the wavelet characteristics of an indoor-simulated spark source wavelet.展开更多
Using a Monte Carlo method and resonable data in our experiment device, we simulate the plasma stream of ECR plasma source on condition that the plasma is collisionless. We can get the distribution of ion density and ...Using a Monte Carlo method and resonable data in our experiment device, we simulate the plasma stream of ECR plasma source on condition that the plasma is collisionless. We can get the distribution of ion density and the effect of magnetic field on the plasma along the divergent magnetic field. The research is beneficial to plasma processing applications.展开更多
In this paper a thermogravimetry-differential thermal analysis method coupled with chromatography (TG-DTA-GC) has been adopted to simulate the generation of gaseous hydrocarbons from different hydrocarbon source rocks...In this paper a thermogravimetry-differential thermal analysis method coupled with chromatography (TG-DTA-GC) has been adopted to simulate the generation of gaseous hydrocarbons from different hydrocarbon source rocks such as coals, mudstones, and carbonate rocks with different maturities. The temperature programming for thermal simulation experiment is 20℃/min from ambient temperature to 700℃. As viewed from the quantities and composition of generated gaseous hydrocarbons at different temperatures, it is shown that low-mature coal has experienced the strongest exothermic reaction and the highest loss of weight in which the first exothermic peak is relatively low. Low-mature coal samples have stronger capability of generating gaseous hydrocarbons than high-mature samples. The amounts and composition of gaseous hydrocarbons generated are closely related not only to the abundance of organic carbon in source rocks, but also to the type of kerogen in the source rocks, and their thermal maturity. In the present highly mature and over-mature rock samples organic carbon, probably, has already been exhausted, so the production of gaseous hydrocarbons in large amounts is impossible. The contents of heavy components in gaseous hydrocarbons from the source rocks containing type-Ⅰand -Ⅱ kerogens are generally high; those of light components such as methane and ethane in gaseous hydrocarbons from the source rocks with Ⅲ-type kerogens are high as well. In the course of thermal simulation of carbonate rock samples, large amounts of gaseous hydrocarbons were produced in a high temperature range.展开更多
基金supported by project of Beijing Postdoctoral Research Fund(Grant No.2025-ZZ-86)the National Natural Science Foundation of China(Grant Nos.12105020 and 12075031)+3 种基金Shenzhen Science and Technology Program(Grant No.KJZD20230923114219040)the Natural Science Youth Foundation of Henan Province,China(Grant No.242300420637)the Open Fund of Key Laboratory of Beam Technology of the Ministry of Education,Beijing Normal University(Grant No.BEAM2024G02)the Innovation Cultivation of Beijing Academy of Science and Technology(Grant Nos.25CB007-01 and 25CB007-02)。
文摘A double-parabola monocapillary(DPM)was designed for laboratory x-ray sources,and its performance was evaluated through numerical simulations and experimental validation.A surface shape error model was developed to characterize the DPM surface profile,and ray-tracing methods were used to simulate key properties such as focal spot size,divergence,and transmission efficiency.The simulation results closely matched experimental measurements,validating the proposed model.This surface shape error simulation provides an efficient method for evaluating the impact of slope errors on DPM performance,offering insights for optimal design and precision manufacturing.
基金supported by the National Key Research and Development Program of China(Nos.2022YFA1204203 and 2022YFA1204201)Opening Fund of the State Key Laboratory of Optoelectronic Materials and Technologies at Sun Yat-sen University(No.OEMT-2023-KF-01)+1 种基金National Natural Science Foundation of China(Nos.61971463,82272131,and 82202960)the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515010537).
文摘Flat-panel X-ray sources(FPXSs)have many advantages in terms of compactness and low-dose imaging,enhancing their capability for novel X-ray applications.Experimental analysis of the X-ray characteristics and optimizing the anode panel of an FPXS are time-consuming,expensive,and sometimes impractical.In this study,a FPXS was prepared using a ZnO nanowire cold cathode and a molybdenum film anode target.Monte Carlo(MC)simulations were utilized to optimize the anode panel and obtain the average fluence,average energy,and spatial distribution of the X-rays for the ZnO nanowire FPXS.The accuracy of the MC simulations was verified by comparing the measured and simulated energy spectra.Optimization of the anode target considers the material,thickness,and morphology,whereas optimization of the substrate focuses on the material and thickness.The results show that the difference between the positions of the K-shell peaks in the measured and simulated energy spectra is within 0.26 keV.At the acceleration voltages of 30 kV,60 kV,and 90 kV,the optimal thicknesses of the tungsten array anode were 0.65μm,2.45μm,and 5μm,respectively,while the molybdenum array anode has the optimal thicknesses of 1.45μm,5.25μm,and 24μm,respectively.The microsemi-ellipsoidal anode with a recessed design showed a 5%increase in the transmitted X-ray fluence compared with the film target.The sapphire substrate with a thickness of 0.78 mm exhibits a mechanical strength comparable to that of a glass substrate with a thickness of 3 mm,implying that the former can increase the average X-ray fluence by reducing the filtration of X-rays.The findings of this study provide valuable guidance for the fabrication and optimization of the ZnO nanowire FPXS.
文摘The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in FPXS.The conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection calculations.However,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in FPXS.This study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)simulator.The two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the phantom.Imaging-system modeling was performed by modeling the FPXS,imaging geometry,and detector.The gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence map.The entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were calculated.The accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation time.The results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10902010 and 10975121)the Foundation of China Academy of Engineering Physics(CAEP)(Grant No.2009A0102003)the Foundation of Laboratory of Science and Technology on Plasma Physics,RCLF,CAEP(Grant No.9140C680305120C68252)
文摘Energy spectra, angular distributions, and temporal profiles of the photons produced by an all-optical Thomson scat- tering X-ray source are explored through numerical simulations based on the parameters of the SILEX-I laser system （800 nm, 30 fs, 300 TW） and the previous wakefield acceleration experimental results. The simulation results show that X-ray pulses with a duration of 30 fs and an emission angle of 50 mrad can be produced from such a source. Using the optimized electron parameters, X-ray pulses with better directivity and narrower energy spectra can be obtained. Besides the electron parameters, the laser parameters such as the wavelength, pulse duration, and spot size also affect the X-ray yield, the angular distribution, and the maximum photon energy, except the X-ray pulse duration which is slightly changed for the case of ultrafast laser-electron interaction.
基金National Key Research and Development Program of China under Grant No.2022YFC3003601National Natural Science Foundation of China under Grant No.52478570+1 种基金Heilongjiang Provincial Natural Science Foundation Outstanding Youth Program under Grant No.J020245002the Key Research and Development Program of Xinjiang Production and Construction Corps under Grant No.2024AB077。
文摘The stochastic extended finite-fault simulation method(EXSIM)is a widely used tool in seismological research,with applications in ground motion prediction and simulation,seismic hazard analysis,and engineering studies.However,recent studies have revealed a significant limitation:EXSIM tends to overpredict ground motions in the low-to-intermediate frequency range,particularly for large thrust earthquakes that are often characterized by a double-corner-frequency source model.To address this issue and enhance simulation accuracy,this study introduces two key improvements:(1)a novel asperity-distributed stress-drop composite fault model and(2)a hybrid application of EXSIM with the composite fault model.The proposed method is validated through its application to the 2013 M_(w)6.7 Lushan earthquake that occurred in China and six thrust earthquakes with an M_(w)≥6.5 in Japan.By comparing the simulated ground motions with recorded data,the results demonstrate that the improved method achieves consistent accuracy across the high-and low-frequency spectrum(combined goodness-of-fit:CGOF<0.35).This study significantly broadens the applicability of stochastic finite-fault simulations,enabling more reliable predictions for a wider range of seismic scenarios,including complex thrust faulting events.
文摘By considering the heterogeneity of geomechanical materials, the source development of earthquake under compression boundary conditions is studied with a newly developed numerical method, Rock Failure Process Analysis code (RFPA2D). The process of fault forming and associated micro seismicities in a rectangle area with a inclusion but without any clear structural features of original fault is modeled. The modeling demonstrates the whole process of source development of earthquake from deformation, micro failure to collapse and the behavior of temporal spatial distribution of micro seismicities. The stress, strain and the temporal spatial distribution of micro seismicities vividly depict the phenomena of localization, temporal transitions, dilatation or rise, elastic rebound and conjugate (X type) deformation zone.
基金Project(GC06A316) supported by the Key Technologies Research and Development Program of Heilongjiang Province, China Project(11531038) supported by the Program of the Educational Commission of Heilongjiang Province of China.
文摘Aimed at unbalance of soil temperature field of ground source heat pump system, solar aided energy storage system was established. In solar assisted ground-source heat pump (SAGSHP) system with soil storage, solar energy collected in three seasons was stored in the soil by vertical U type soil exchangers. The heat abstracted by the ground-source heat pump and collected by the solar collector was employed to heating. Some of the soil heat exchangers were used to store solar energy in the soil so as to be used in next winter after this heating period; and the others were used to extract cooling energy directly in the soil by circulation pump for air conditioning in summer. After that solar energy began to be stored in the soil and ended before heating period. Three dimensional dynamic numerical simulations were built for soil and soil heat exchanger through finite element method. Simulation was done in different strata month by month. Variation and restoration of soil temperature were studied. Economy and reliability of long term SAGSHP system were revealed. It can be seen that soil temperature is about 3 ℃ higher than the original one after one year's running. It is beneficial for the system to operate for long period.
基金supported by Young Innovative Talents Training Plan of Heilongjiang(UNPYSCT-2018133).
文摘Since programing complex and dynamic heat source model for welding simulation is a complex job,the parametric methods are studied in this paper.Firstly,an overall flow to achieve automatically modeling welding was introduced.Secondly,an expert module rule for selecting welding heat source model was founded,which is based on simulation knowledge and experiences.Thirdly,a modularity routine method was investigated using writing with C++programing,which automatically creates subroutines of 3D dynamic heat source model for user.To realize the dynamic weld path,the local weld path coordinate system was moved in the global coordinate system and it is used to model the direction of weld gun,welding path and welding pose.The weld path data file was prepared by the automatic tool for the welding heat source subroutines.All above functions were integrated in the user interface and the connection with architecture was introduced.At last,a laser beam welding heat source modeling was automatically modeled and the weld pool geometry was compared with the reported literature.It demonstrated that the automated tool is valid for welding simulation.Since modeling became convenient for welding simulation using the tool proposed,it could be easy and useful for welding engineers to acquire the needed information.
文摘Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.
基金support from the National Key Research and Development Program of China(No.2018YFD0900704)the National Natural Science Foundation of China(No.31972796).
文摘The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.
基金This research projectwas financiallysupported jointlybythe National Bas-ic Research (973) Programof China (No.2001CB209102) and the ImportantDirection Project of Knowledge Innovation in Resources and EnvironmentField sponsored by the Chinese Academy of Sciences (KZCX3-SW-128).
文摘Gaseous hydrocarbon geochemistry research through a thermal simulation experiment in combination with the natural evolution process in which natural gases were formed from coal-measure source rocks revealed that the {δ{}+{13}C-1} values of methane vary from light to heavy along with the increase of thermal evolution degree of coal-measure source rocks, and the {δ{}+{13}C-2} values of ethane range from {-28.3‰} to {-20‰} (PDB). {δ{}+{13}C-2} value was {-28‰±} (R-O={0.45%}-{0.65%}) at the lower thermal evolution stage of coal-measure source rocks. After the rocks entered the main hydrocarbon-generating stage (R-O={0.65%}-{1.50%}), {δ{}+{13}C-2} values generally varied within the range of {-26‰}-{-23‰±}; with further thermal evolution of the rocks the carbon isotopes of ethane became heavier and heavier, but generally less than -20‰.; The partial carbon isotope sequence inversion of hydrogen gases is a characteristic feature of mixing of natural gases of different origins. Under the condition of specially designated type of organic matter, hydrogen source rocks may show this phenomenon via their own evolution.; In the lower evolution stages of the rocks, it is mainly determined by organic precursors that gaseous hydrocarbons display partial inversion of the carbon isotope sequence and the carbon isotopic values of ethane are relatively low. These characteristic features also are related to the geochemical composition of primary soluble organic matter.
文摘Historical mining activities often lead to continuing wide spread contaminants in both groundwater and surface water in previously operational mine site areas. The contamination may continue for many years after closing down the mining activities. The essential first step for sustainable management of groundwater and development of remediation strategies is the unknown contaminant source characterization. In a mining site, there are multiple species of contaminants involving complex geochemical processes. It is difficult to identify the potential sources and pathways incorporating the chemically reactive multiple species of contaminants making the source characterization process more challenging. To address this issue, a reactive transport simulation model PHT3D is linked to a Simulated Annealing based the optimum decision model. The numerical simulation model PHT3D is utilized for numerically simulating the reactive transport process involving multiple species in the former mine site area. The simulation results from the calibrated PHT3D model are illustrated, with and without incorporating the chemical reactions. These comparisons show the utility of using a reactive, geochemical transport process’ simulation model. Performance evaluation of the linked simulation optimization methodology is evaluated for a contamination scenario in a former mine site in Queensland, Australia. These performance evaluation results illustrate the applicability of linked simulation optimization model to identify the source characteristics while using PHT3D as a numerical reactive chemical species’ transport simulation model for the hydro-geochemically complex aquifer study area.
文摘According to the precursory data of the 1976 Tangshan earthquake( M =7.8), and combining with the research results of rock fracture, seismic source, tectonics, seismic precursors, dynamic condition and crust structure, the seismogenic process of Tangshan earthquake has been numerically simulated by using the model of water saturated porous medium with a rhombic hard inclusion. First, a system of seismogenic dynamics equations of solid liquid two phase medium has been set up under considering rock inelastic dilation, strain softening and pore water permeation. Then, the finite difference method to solve the equation system in incremental form has been presented. Finally, the seismogenic process of Tangshan earthquake and the temporal spatial characteristics of its precursors have been numerically simulated when the hard inclusion includes a soft fault belt. The numerically simulating result shows that the development of Tangshan earthquake mainly undergoes following processes: elastic accumulation, early inelastic cubic dilation, accelerative softening (failure and creep) of fault first time, inelastic dilation twice in Tianjin—Ninghe area, accelerative softening of fault twice and instability. Corresponding to the fault accelerative softening, elastic recovery and inelastic dilation twice in some parts of seismogenic medium. By comparing with the data of precursory observation, ones can find the preceding simulating result explains the varied characters of practical data better. Meanwhile, the numerical simulation further displays the temporal spatial change law and complex patterns of the field of Tangshan earthquake development as well. It makes a base study for the physical mechanism of change of the seismic precursory field.
基金support of the Major National Science and Technology Projects(No.2011ZX05006-002)the Fundamental Research Funds for the Central Universities of China(No.09CX04009A)
文摘The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resolution of seismic data, and free boundary can cause surface wave. Considering the above problems, we focus on the Rayleigh wavefields simulation using finite-difference wave equation of higher-order staggered grids and PML boundary conditions. Free boundary, buried source and overlying low velocity layer are taken into consideration and point explosion source is adopted. Through some numerical simulation with different parameters, we quantitatively analyze relationship between wave intensity and source depth, as well as the energy variation with propagation and obtain some practical knowledge and conclusions.
文摘A wide range of welding and surface treatment processes involve the use of a heat source which is moving at a constant speed over the component. The numerical simulation of such processes implies a transient analysis using a very refined mesh in order to follow properly the path of the heat source. The 3D-mesh size can be very large if one consider the welds length or the heat-treated surface size in industrial components. To reduce the computational time to acceptable values, several techniques have been investigated. The first type is to use analytical methods such as Rosenthal equations. The second type of solutions consists in performing a transient analysis using adaptive meshing. But, for a large proportion of the involved processes, practical experience demonstrates the existence of quasi steady state conditions over the major part of the heat source path. Numerical algorithms have therefore been developed to directly compute the steady temperature, metallurgical phase proportion and stress distributions. This paper gives a general overview of the different numerical methods used to simulate welding and surface treatment processes with a special emphasis on the steady state calculation. The benefits and limitations of each of them are discussed and applications are presented.
文摘This paper briefly reviews the characteristics and major processes of the explicit finite element method in modeling the near-fault ground motion field. The emphasis is on the finite element-related problems in the finite fault source modeling. A modified kinematic source model is presented, in which vibration with some high frequency components is introduced into the traditional slip time function to ensure that the source and ground motion include sufficient high frequency components. The model presented is verified through a simple modeling example. It is shown that the predicted near-fault ground motion field exhibits similar characteristics to those observed in strong motion records, such as the hanging wall effect, vertical effect, fling step effect and velocity pulse effect, etc.
基金supported by the National Natural Science Foundation of China(Grant No.11176032)the China Academy of Engineering Physics(CAEP)THz Science and Technology Foundation(Grant No.CAEPTHZ201209)+1 种基金the Scientific Reserch Fund of Sichuan Provincial Education Department,China(GrantNo.12ZA183)the Southwest University of Science and Technology Doctor Fund,China(Grant No.13zx7106)
文摘A systematic research on the electron deposition process in the JAEA 10 A ion source is carried out by using a particle-in-cell/Monte Carlo collision simulation, which is based on a full three-dimensional self-developed code. Two parts are studied. One is the space and energy distribution of fast and slow electrons, the other is the vibration excitation collisions between electrons and hydrogen moleculars. The results show that the inhomogeneity of electrons comes from the Y direction drift of the fast electrons （Te ≥25 eV） due to the action of the magnetic fields. This drift also increases the number of vibration excitation collisions in the -Y direction, and results in the increase of Ha in the -Y direction, eventually leading to the -Y drift of H^-. It explains the spatial non-uniformity in the JAEA 10 A ion source.
基金supported by the Geological Survey of China(No.DD20191003)the National Key Research and Development Plan(No.2016YFC0303901)。
文摘Marine spark sources are widely used in high-resolution marine seismic surveys.The characteristic of a wavelet is a critical part in seismic exploration;thus,the formation and numerical simulation of spark source wavelets should be explored.In studies on spark source excitation,the acoustic field generated by the interaction between bubbles constitutes the near-field wavelet of a source.Therefore,this interaction should be revealed by studying complex multibubble motion laws.In this study,actual discharge conditions were combined to derive the multibubble equation of motion.Energy conservation,ideal gas equation,and environmental factors in the discharge of spark source wavelets were studied,and the simulation method of an ocean spark source wavelet was established.The accuracy of the simulation calculation method was verified through a comparison of indoor-measured signals using three electrodes and the spark source wavelet obtained in the field.Results revealed that the accuracy of the model is related to the number of electrodes.The fewer the number of electrodes used,the lower will be the model's accuracy.This finding is attributed to the statistical hypothesis factor introduced to eliminate the coupling term of the interaction of the multibubble motion equation.This study presents a method for analyzing the wavelet characteristics of an indoor-simulated spark source wavelet.
文摘Using a Monte Carlo method and resonable data in our experiment device, we simulate the plasma stream of ECR plasma source on condition that the plasma is collisionless. We can get the distribution of ion density and the effect of magnetic field on the plasma along the divergent magnetic field. The research is beneficial to plasma processing applications.
文摘In this paper a thermogravimetry-differential thermal analysis method coupled with chromatography (TG-DTA-GC) has been adopted to simulate the generation of gaseous hydrocarbons from different hydrocarbon source rocks such as coals, mudstones, and carbonate rocks with different maturities. The temperature programming for thermal simulation experiment is 20℃/min from ambient temperature to 700℃. As viewed from the quantities and composition of generated gaseous hydrocarbons at different temperatures, it is shown that low-mature coal has experienced the strongest exothermic reaction and the highest loss of weight in which the first exothermic peak is relatively low. Low-mature coal samples have stronger capability of generating gaseous hydrocarbons than high-mature samples. The amounts and composition of gaseous hydrocarbons generated are closely related not only to the abundance of organic carbon in source rocks, but also to the type of kerogen in the source rocks, and their thermal maturity. In the present highly mature and over-mature rock samples organic carbon, probably, has already been exhausted, so the production of gaseous hydrocarbons in large amounts is impossible. The contents of heavy components in gaseous hydrocarbons from the source rocks containing type-Ⅰand -Ⅱ kerogens are generally high; those of light components such as methane and ethane in gaseous hydrocarbons from the source rocks with Ⅲ-type kerogens are high as well. In the course of thermal simulation of carbonate rock samples, large amounts of gaseous hydrocarbons were produced in a high temperature range.
