The multilayer Laue lens(MLL) is a diffractive focusing optical element which can focus hard X-rays down to the nanometer scale. In this study, a WSi_(2)/Si multilayer structure consisting of 1736 layers, with a 7.2-n...The multilayer Laue lens(MLL) is a diffractive focusing optical element which can focus hard X-rays down to the nanometer scale. In this study, a WSi_(2)/Si multilayer structure consisting of 1736 layers, with a 7.2-nm-thick outermost layer and a total thickness of 17 μm, is prepared by DC magnetron sputtering. Regarding the thin film growth rate calibration, we correct the long-term growth rate drift from 2 to 0.6%, as measured by the grazing incidence X-ray reflectivity(GIXRR). A one-dimensional line focusing resolution of 64 nm was achieved,while the diffraction efficiency was 38% of the-1 order of the MLL Shanghai Synchrotron Radiation Facility(SSRF) with the BL15U beamline.展开更多
1 Introduction Annually laminated(varve)sedimentary deposits are considered as one of the most important archives,since they offer precise temporal information(years)in combination with high time resolutions.Bottom se...1 Introduction Annually laminated(varve)sedimentary deposits are considered as one of the most important archives,since they offer precise temporal information(years)in combination with high time resolutions.Bottom sediments of the lakes contain detailed geochemical information on展开更多
A new type of x-ray lens composed of multi-square polycapillary slices(ASPXRL)used in focusing parallel x-ray beam was presented in this paper.Compared with conventional x-ray polycapillary lens,ASPXRL can provide sma...A new type of x-ray lens composed of multi-square polycapillary slices(ASPXRL)used in focusing parallel x-ray beam was presented in this paper.Compared with conventional x-ray polycapillary lens,ASPXRL can provide smaller and brighter focus.The effects of the manufacturing imperfections on focusing quality of ASPXRL were evaluated with the values of transmission efficiency and discussed.It is suggested that ASPXRL has application prospects as a condenser lens for x-ray microscopy and flux collectors for x-ray analytical instruments.展开更多
This study examines whether and how cues focusing enhances Chinese-speaking English learners’engagement in comparison,thereby facilitating their acquisition of English articles within xu-based comparative continuatio...This study examines whether and how cues focusing enhances Chinese-speaking English learners’engagement in comparison,thereby facilitating their acquisition of English articles within xu-based comparative continuation writing tasks.Fifty English majors from a Chinese university were randomly assigned to three groups and each group was required to complete a comparative continuation task with one of three conditions:paired cues(cues presented in pairs),randomized cues(cues presented in random order),or implicit cues(no explicit cues provided).All participants undertook pretests,posttests,and delayed tests on English article knowledge,and ten of them volunteered to take follow-up interviews.The results indicate that:1)paired cues were more effective than randomized or implicit cues in promoting the acquisition of English articles;and 2)learners in the paired cues condition produced more target-like article usage in their continuation writings compared to those in the other two conditions.The effectiveness of paired cues is attributed to an enhanced contrast effect,which prompts learners to identify similarities and differences between cues within each pair,relates cue explanations and examples with actual article usage in the reading text,and reflects upon and compares their own article productions against those in the provided reading text.The study concludes that the process of learning through continuation is fundamentally supported by learners’capacity for comparison,reinforcing its role as a core element of xu-competence.展开更多
The effect of plasma and charged particle interaction with spacecraft in a low Earth orbit(LEO)environment leads to ion focusing and the formation of an ion void in the downstream region as a result of charging.Simula...The effect of plasma and charged particle interaction with spacecraft in a low Earth orbit(LEO)environment leads to ion focusing and the formation of an ion void in the downstream region as a result of charging.Simulations and investigations using a fixed potential imposed on the spacecraft showed the nonsignificance of geophysical parameter changes to ion focusing.Variation of the temperature ratio(T_(r))contributed only to local ion focusing and manifested as two-ion streamers dispersed at the upper and lower edges of the spacecraft-the outermost layers of the satellite structure at the top and bottom,respectively.A simulation involving changing the ambient plasma density(N_(p))also showed the formation of local ion focusing,in which ions were more concentrated as the density increased.Furthermore,auroral electron density(N_(ae))variation had no clear impact on ion focusing,as indicated by static two-ion structures in the wake field.However,variation of the object potential(ϕ)strongly affected ion focusing formation,leading to distortion of the initial ion void region behind the spacecraft.The formation of ion focusing in this study was subject to the electric field produced by the object potential and the ambipolar electric field resulting from plasma expansion in the downstream region.展开更多
The Einstein Probe(EP)mission,approved by the Chinese Academy of Sciences(CAS)in 2017 and launched in 2024,is a significant advancement in time-domain astronomy.The Follow-up X-ray Telescope(FXT),equipped with a Wolte...The Einstein Probe(EP)mission,approved by the Chinese Academy of Sciences(CAS)in 2017 and launched in 2024,is a significant advancement in time-domain astronomy.The Follow-up X-ray Telescope(FXT),equipped with a Wolter I focusing mirror system and a PNCCD detector,is critical for detecting and analyzing cosmic X-rays.To ensure its reliability in space,structural and structural-thermal models were developed,and mechanical and thermal tests were conducted to verify its ability to withstand launch stresses and space conditions.The Wolter I mirrors,manufactured and integrated by the HIT team,achieved an angular resolution of 57 arcseconds at 1.5 keV and an effective area of 250 cm^(2).This paper presents the verification results of these tests,including insights from the flight spare model,and discusses potential reasons for the observed loss of effective area,such as alignment imperfections or thermal distortions.These findings are essential for optimizing the FXT’s design and ensuring the mission’s success,highlighting the importance of rigorous testing in space-based observatory development.展开更多
According to intensity distribution of the synchrotron radiation source focused by a toroidal mirror at the Beijing synchrotron radiation biological macromolecule station, theoretical modeling of the Beijing synchrotr...According to intensity distribution of the synchrotron radiation source focused by a toroidal mirror at the Beijing synchrotron radiation biological macromolecule station, theoretical modeling of the Beijing synchrotron radiation source is developed for capillary optics. Using this theoretical modeling, the influences of the configuration curve of the polycapillary X-ray lens on transmission efficiency and working distance are analyzed. The experimental results of the transmission efficiency and working distance at the biological macromolecule station are in good agreement with the theoretical results.展开更多
The x-ray compound lens is a novel refractive x-ray optical device. This paper reports the authors＇ recent research on a polymethyl methacrylate （PMMA） compound x-ray lens. Firstly the designing and LIGA fabricatio...The x-ray compound lens is a novel refractive x-ray optical device. This paper reports the authors＇ recent research on a polymethyl methacrylate （PMMA） compound x-ray lens. Firstly the designing and LIGA fabrication process for the PMMA compound x-ray lens are briefly described. Then, a method for theoretical analysis, as well as the experimental system for measurement is also introduced. Finally, the focusing spots for 8keV monochromatic x-rays by the PMMA compound x-ray lens are measured and analysed. According to the experimental results, it is concluded that the PMMA compound x-ray lens promises a good focusing performance under the high-energy x-rays.展开更多
The grazing incidence focusing X-ray pulsar telescope(iFXPT), as the main payload of the X-ray Pulsar Navigation Test Satellite(XPNAV-1), will have great significance on China's space scientific exploration and X-...The grazing incidence focusing X-ray pulsar telescope(iFXPT), as the main payload of the X-ray Pulsar Navigation Test Satellite(XPNAV-1), will have great significance on China's space scientific exploration and X-ray pulsar navigation. With PSR B0531+21(Crab Pulsar) as the observation target, the pulsar profile has been recovered based on the data obtained by iFXPT, realizing the main objective of "observing" PSR B0531+21 for the first time in China. This payload mainly consists of the Wolter-I X-ray optics, silicon drift detector, magnetic deflector, electronics, high-energy particle shield and high-stability structures. Currently, the iFXPT, with its good in-orbit performance, has obtained a considerable observation data. The effective area, sensitivity and energy response have been calibrated both on ground and in-orbit, demonstrating a high degree of consistency. Meanwhile, the in-orbit observation data and information for pulsar navigation has also been analyzed simultaneously. As a result, the feasibility of the exploration scheme and the performance of the telescope have been fully validated.展开更多
We report a design for one nanometer X-ray focusing by a complex refractive lens, which is capable of focusing 20 keV X-rays down to a lateral size of 0.92 nm （full-width at half-maximum （FWHM）） and an axial size ...We report a design for one nanometer X-ray focusing by a complex refractive lens, which is capable of focusing 20 keV X-rays down to a lateral size of 0.92 nm （full-width at half-maximum （FWHM）） and an axial size of 98 nm （FWHM） with intensity gain of 49050. This complex refractive lens is comprised of a series of kinoform lenses, whose aperture is gradually matched to the converging trace of the X-ray beam so as to increase the numerical aperture （NA）. The theoretical principle of the proposed complex refractive lens is presented. The NAs of these lenses are calculated. The numerical simulation results demonstrate that the proposed design can focus the X-ray beam into sub-nanometer while remaining high gain.展开更多
Ultra-intense electromagnetic fields exceeding 10^(23)W∕cm^(2)are enabling breakthroughs in compact laser-driven particle accelerators and revealing new quantum electrodynamics(QED)phenomena.However,conventional lase...Ultra-intense electromagnetic fields exceeding 10^(23)W∕cm^(2)are enabling breakthroughs in compact laser-driven particle accelerators and revealing new quantum electrodynamics(QED)phenomena.However,conventional laser-focusing methods face considerable engineering challenges and require substantial costs.Focusing schemes utilizing plasma optics can produce sub-micrometer focus spots beyond the diffraction limit and substantially enhance the peak intensity;however,owing to significant energy dissipation,they may fail to simultaneously increase the laser fluence.To address these challenges,we propose a focusing scheme employing a near-critical-density hollow plasma fiber(HPF)that utilizes graded refractive index dynamics to boost both laser peak intensity and fluence at the same time.Three-dimensional particle-in-cell simulations demonstrate the HPF’s capability to focus a 4.5-μm-diameter Gaussian beam to a sub-diffraction-limited 0.6-μm-diameter spot.The peak intensity and laser fluence can be enhanced by factors of 22 and 10,respectively,marking a substantial improvement over existing plasma-based focusing schemes.Furthermore,the proposed scheme exhibits wide-range parameter adaptation and high robustness,making it suitable for direct implementation in PW-class ultra-intense laser experiments.展开更多
Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing...Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing.However,elastic coding lenses(ECLs)still suffer from low focusing performance,thickness comparable to wavelength,and frequency sensitivity.Here,we consider both the structural and material properties of the coding unit,thus realizing further compression of the thickness of the ECL.We chose the simplest ECL,which consists of only two encoding units.The coding unit 0 is a straight structure constructed using a carbon fiber reinforced composite material,and the coding unit 1 is a zigzag structure constructed using an aluminum material,and the thickness of the ECL constructed using them is only 1/8 of the wavelength.Based on the theoretical design,the arrangement of coding units is further optimized using genetic algorithms,which significantly improves the focusing performance of the lens at different focus and frequencies.This study provides a more effective way to control vibration and noise in advanced structures.展开更多
Adjustable or programmable metamaterials offer versatile functions,while the complex multi-dimensional regulation increases workload,and hinders their applications in practical scenarios.To address these challenges,we...Adjustable or programmable metamaterials offer versatile functions,while the complex multi-dimensional regulation increases workload,and hinders their applications in practical scenarios.To address these challenges,we present a mechanically programmable acoustic metamaterial for real-time focal tuning via one-dimensional phase-gradient modulation in this paper.The device integrates a phase gradient structure with concave cavity channels and an x-shaped telescopic mechanical framework,enabling dynamic adjustment of inter-unit spacing(1 mm-3 mm)through a microcontroller-driven motor.By modulating the spacing between adjacent channels,the phase gradient is precisely controlled,allowing continuous focal shift from 50 mm to 300 mm along the x-axis at 7500 Hz.Broadband focusing is also discussed in the range6800 Hz-8100 Hz,with transmission coefficients exceeding 0.5,ensuring high efficiency and robust performance.Experimental results align closely with simulations,validating the design's effectiveness and adaptability.Unlike conventional programmable metamaterials requiring multi-dimensional parameter optimization,this approach simplifies real-time control through single-axis mechanical adjustment,significantly reducing operational complexity.Due to the advantages of broadband focusing,simple control mode,real-time monitoring,and so on,the device may have extensive applications in the fields of acoustic imaging,nondestructive testing,ultrasound medical treatment,etc.展开更多
Dynamically tunable terahertz(THz)beam focusing plays a critical role in emerging applications including reconfigurable imaging,localized spectral analysis,and micro-machining.Conventional methods,however,frequently e...Dynamically tunable terahertz(THz)beam focusing plays a critical role in emerging applications including reconfigurable imaging,localized spectral analysis,and micro-machining.Conventional methods,however,frequently employ complex wavefront modulators and external control algorithms,resulting in increased system footprint and limited tuning efficiency.In this work,we present an all-silicon mechanically rotatable cascaded metasurface capable of dynamic THz beam focusing.By independently adjusting the relative rotation angles between the two metasurface layers,real-time repositioning of the focal spot is achieved for orthogonal circular polarization channels.The proposed design facilitates polarization-division multiplexing without requiring external algorithms or active materials while preserving high focusing efficiency and beam quality across a predefined focal plane.Numerical simulations reveal a quasi-linear shift of the focal position with the rotation angle,with stable focusing efficiency and full-width at half-maximum observed in both polarization channels.This strategy offers an efficient and reliable approach to dynamic wavefront control for compact,reconfigurable THz imaging,sensing,and communication systems.展开更多
We have developed a novel method for correcting resistivity anisotropy in array induction logging(AIL)for shale reservoirs drilled with horizontal wells.This method is featured by two aspects:simplifying software focu...We have developed a novel method for correcting resistivity anisotropy in array induction logging(AIL)for shale reservoirs drilled with horizontal wells.This method is featured by two aspects:simplifying software focusing(SF)algorithm from two-dimensional(2D)to one-dimensional(1D)and approximately decoupling the resistivity anisotropy effect.Initially,the typical raw and focused AIL responses are simulated to determine the applicability of the 2D SF algorithm in deviated and horizontal wells.The non-necessity of SF algorithm along vertical direction is also proved for the pure horizontal wells.Subsequently,a 1D SF algorithm that focuses only along the radial direction in horizontal wells is developed to replace the original 2D SF algorithm.This new method eliminates the opacity of traditional SF algorithms and can be easily applied to different AIL tools.The sensitivity of AIL to resistivity anisotropy in homogeneous and layered formations is then discussed,showing that the anisotropy effect can be separated from other effects.Finally,an efficient anisotropy correction scheme using the Levenberg-Marquardt algorithm is established to quickly and accurately correct AIL data in horizontal wells.Results from simulated and measured data demonstrate that this new method effectively removes the anisotropy effect and provides accurate horizontal resistivity for shale beds drilled with horizontal wells.Compared with existing methods,it is significantly faster and compatible with AIL tools from various companies,laying solid foundation for the interpretation and evaluation of shale reservoirs in horizontal wells.展开更多
Multilayer Laue lenses are volume diffraction elements for the efficient focusing of X-rays.With a new manufacturing technique that we introduced,it is possible to fabricate lenses of sufficiently high numerical apert...Multilayer Laue lenses are volume diffraction elements for the efficient focusing of X-rays.With a new manufacturing technique that we introduced,it is possible to fabricate lenses of sufficiently high numerical aperture(NA)to achieve focal spot sizes below 10 nm.The alternating layers of the materials that form the lens must span a broad range of thicknesses on the nanometer scale to achieve the necessary range of X-ray deflection angles required to achieve a high NA.This poses a challenge to both the accuracy of the deposition process and the control of the materials properties,which often vary with layer thickness.We introduced a new pair of materials—tungsten carbide and silicon carbide—to prepare layered structures with smooth and sharp interfaces and with no material phase transitions that hampered the manufacture of previous lenses.Using a pair of multilayer Laue lenses(MLLs)fabricated from this system,we achieved a two-dimensional focus of 8.4×6.8 nm2 at a photon energy of 16.3 keV with high diffraction efficiency and demonstrated scanning-based imaging of samples with a resolution well below 10 nm.The high NA also allowed projection holographic imaging with strong phase contrast over a large range of magnifications.An error analysis indicates the possibility of achieving 1 nm focusing.展开更多
Hall thrusters with large height-radius ratio,owing to their unique advantages in compactness,lightweight,and high performance,have progressively emerged as a preferred choice for diverse space propulsion applications...Hall thrusters with large height-radius ratio,owing to their unique advantages in compactness,lightweight,and high performance,have progressively emerged as a preferred choice for diverse space propulsion applications in the future.However,the amplification of the annular effect in structures with a large height-radius ratio poses a practical problem of plume over-focusing,which seriously restricts the further improvement of Hall thruster performance and the extension of its life.In this study,the formation mechanism of over-focused plume is deeply investigated,and it is ascertained that an intensified radial electric field directed towards the inner wall within the channel serves as a key contributing factor.This phenomenon is fundamentally attributed to structural characteristics of large height-radius ratio that induce pronounced inward inclination of field lines within strong magnetic field zone.Based on this,the design concept of focused magnetic field is proposed,wherein straight magnetic field lines are established within the strong magnetic field zone to generate a quasi-axial accelerating electric field.Simultaneously,the symmetrical magnetic field inside the channel ensures ionization concentration near the channel center,thereby achieving optimal matching between the ionization zone and accelerating field.Experimental results demonstrate that employing a focused magnetic field significantly reduces the divergence half-angle of the plume and yields an excellently barrel-shaped focusing plume morphology in HEP-1350PM.Consequently,the total efficiency of the thruster surpasses 60%,while erosion belt on the inner wall is shortened by nearly 50%.These advancements effectively enhance thruster performance and prolong its operational lifespan.This study can not only resolve practical problems associated with plume over-focusing,but also provide a fundamental guiding principle for magnetic field design of Hall thrusters.展开更多
This study utilizes a visualization nozzle and spray experimental platform to experimentally investigate the flow focusing/blurring nozzle.It is found that the working mode of the nozzle transitions from flow focusing...This study utilizes a visualization nozzle and spray experimental platform to experimentally investigate the flow focusing/blurring nozzle.It is found that the working mode of the nozzle transitions from flow focusing to flow transition and eventually to flow blurring as the gas flow rate increases or the tube hole distance decreases.Conversely,an increase in liquid flow rate only facilitates the transition from flow focusing to flow transition.Changes in the gas/liquid flow rate or tube hole distance influence the gas shear effect and the gas inertial impact effect inside the nozzle,which in turn alters the working mode.An increase in gas flow rate results in a shift of the droplet size distribution towards smaller particle sizes in the flow blurring mode,whereas an increase in liquid flow rate produces the opposite effect.Notably,the impact of the gas flow rate on these changes is more pronounced than that of the liquid flow rate.展开更多
基金the National Natural Science Foundation of China(Nos.12005250,U1932167,and U1432244).
文摘The multilayer Laue lens(MLL) is a diffractive focusing optical element which can focus hard X-rays down to the nanometer scale. In this study, a WSi_(2)/Si multilayer structure consisting of 1736 layers, with a 7.2-nm-thick outermost layer and a total thickness of 17 μm, is prepared by DC magnetron sputtering. Regarding the thin film growth rate calibration, we correct the long-term growth rate drift from 2 to 0.6%, as measured by the grazing incidence X-ray reflectivity(GIXRR). A one-dimensional line focusing resolution of 64 nm was achieved,while the diffraction efficiency was 38% of the-1 order of the MLL Shanghai Synchrotron Radiation Facility(SSRF) with the BL15U beamline.
基金supported by the RFBR projects 13-05-00871,14-02-00631
文摘1 Introduction Annually laminated(varve)sedimentary deposits are considered as one of the most important archives,since they offer precise temporal information(years)in combination with high time resolutions.Bottom sediments of the lakes contain detailed geochemical information on
基金supported by the National Natural Science Foundation of China(Grant No.11875087)。
文摘A new type of x-ray lens composed of multi-square polycapillary slices(ASPXRL)used in focusing parallel x-ray beam was presented in this paper.Compared with conventional x-ray polycapillary lens,ASPXRL can provide smaller and brighter focus.The effects of the manufacturing imperfections on focusing quality of ASPXRL were evaluated with the values of transmission efficiency and discussed.It is suggested that ASPXRL has application prospects as a condenser lens for x-ray microscopy and flux collectors for x-ray analytical instruments.
文摘This study examines whether and how cues focusing enhances Chinese-speaking English learners’engagement in comparison,thereby facilitating their acquisition of English articles within xu-based comparative continuation writing tasks.Fifty English majors from a Chinese university were randomly assigned to three groups and each group was required to complete a comparative continuation task with one of three conditions:paired cues(cues presented in pairs),randomized cues(cues presented in random order),or implicit cues(no explicit cues provided).All participants undertook pretests,posttests,and delayed tests on English article knowledge,and ten of them volunteered to take follow-up interviews.The results indicate that:1)paired cues were more effective than randomized or implicit cues in promoting the acquisition of English articles;and 2)learners in the paired cues condition produced more target-like article usage in their continuation writings compared to those in the other two conditions.The effectiveness of paired cues is attributed to an enhanced contrast effect,which prompts learners to identify similarities and differences between cues within each pair,relates cue explanations and examples with actual article usage in the reading text,and reflects upon and compares their own article productions against those in the provided reading text.The study concludes that the process of learning through continuation is fundamentally supported by learners’capacity for comparison,reinforcing its role as a core element of xu-competence.
基金Kobe Universitythe National Research and Innovation Agency (BRIN)
文摘The effect of plasma and charged particle interaction with spacecraft in a low Earth orbit(LEO)environment leads to ion focusing and the formation of an ion void in the downstream region as a result of charging.Simulations and investigations using a fixed potential imposed on the spacecraft showed the nonsignificance of geophysical parameter changes to ion focusing.Variation of the temperature ratio(T_(r))contributed only to local ion focusing and manifested as two-ion streamers dispersed at the upper and lower edges of the spacecraft-the outermost layers of the satellite structure at the top and bottom,respectively.A simulation involving changing the ambient plasma density(N_(p))also showed the formation of local ion focusing,in which ions were more concentrated as the density increased.Furthermore,auroral electron density(N_(ae))variation had no clear impact on ion focusing,as indicated by static two-ion structures in the wake field.However,variation of the object potential(ϕ)strongly affected ion focusing formation,leading to distortion of the initial ion void region behind the spacecraft.The formation of ion focusing in this study was subject to the electric field produced by the object potential and the ambipolar electric field resulting from plasma expansion in the downstream region.
基金supported by the Strategic Priority Research Program on Space Science,the Chinese Academy of Sciences,Grant No.XDA1531010301.
文摘The Einstein Probe(EP)mission,approved by the Chinese Academy of Sciences(CAS)in 2017 and launched in 2024,is a significant advancement in time-domain astronomy.The Follow-up X-ray Telescope(FXT),equipped with a Wolter I focusing mirror system and a PNCCD detector,is critical for detecting and analyzing cosmic X-rays.To ensure its reliability in space,structural and structural-thermal models were developed,and mechanical and thermal tests were conducted to verify its ability to withstand launch stresses and space conditions.The Wolter I mirrors,manufactured and integrated by the HIT team,achieved an angular resolution of 57 arcseconds at 1.5 keV and an effective area of 250 cm^(2).This paper presents the verification results of these tests,including insights from the flight spare model,and discusses potential reasons for the observed loss of effective area,such as alignment imperfections or thermal distortions.These findings are essential for optimizing the FXT’s design and ensuring the mission’s success,highlighting the importance of rigorous testing in space-based observatory development.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11179010 and 11075017 )the Natural Science Foundation of Beijing,China (Grant No. 1102019)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20100003120010)
文摘According to intensity distribution of the synchrotron radiation source focused by a toroidal mirror at the Beijing synchrotron radiation biological macromolecule station, theoretical modeling of the Beijing synchrotron radiation source is developed for capillary optics. Using this theoretical modeling, the influences of the configuration curve of the polycapillary X-ray lens on transmission efficiency and working distance are analyzed. The experimental results of the transmission efficiency and working distance at the biological macromolecule station are in good agreement with the theoretical results.
基金Project supported by the National Natural Science Foundation of China （Grant No 10174079）, the Natural Science Foundation of Zhejiang Province, China （Grant No Y104203） and BEPC National Laboratory （Grant No sr-03062）.
文摘The x-ray compound lens is a novel refractive x-ray optical device. This paper reports the authors＇ recent research on a polymethyl methacrylate （PMMA） compound x-ray lens. Firstly the designing and LIGA fabrication process for the PMMA compound x-ray lens are briefly described. Then, a method for theoretical analysis, as well as the experimental system for measurement is also introduced. Finally, the focusing spots for 8keV monochromatic x-rays by the PMMA compound x-ray lens are measured and analysed. According to the experimental results, it is concluded that the PMMA compound x-ray lens promises a good focusing performance under the high-energy x-rays.
文摘The grazing incidence focusing X-ray pulsar telescope(iFXPT), as the main payload of the X-ray Pulsar Navigation Test Satellite(XPNAV-1), will have great significance on China's space scientific exploration and X-ray pulsar navigation. With PSR B0531+21(Crab Pulsar) as the observation target, the pulsar profile has been recovered based on the data obtained by iFXPT, realizing the main objective of "observing" PSR B0531+21 for the first time in China. This payload mainly consists of the Wolter-I X-ray optics, silicon drift detector, magnetic deflector, electronics, high-energy particle shield and high-stability structures. Currently, the iFXPT, with its good in-orbit performance, has obtained a considerable observation data. The effective area, sensitivity and energy response have been calibrated both on ground and in-orbit, demonstrating a high degree of consistency. Meanwhile, the in-orbit observation data and information for pulsar navigation has also been analyzed simultaneously. As a result, the feasibility of the exploration scheme and the performance of the telescope have been fully validated.
基金partially supported by the National 973 Program of China(No.2010CB834301)the National Natural Science Foundation of China(No.31100680)+2 种基金the Chinese Academy of Sciences Key Project of International Co-operation(No.GJHZ09058)the External Co-operation Research Project(No.GJHZ1303)the Joint Funds of the National Natural Science Foundation of China(No.U1232205)
文摘We report a design for one nanometer X-ray focusing by a complex refractive lens, which is capable of focusing 20 keV X-rays down to a lateral size of 0.92 nm （full-width at half-maximum （FWHM）） and an axial size of 98 nm （FWHM） with intensity gain of 49050. This complex refractive lens is comprised of a series of kinoform lenses, whose aperture is gradually matched to the converging trace of the X-ray beam so as to increase the numerical aperture （NA）. The theoretical principle of the proposed complex refractive lens is presented. The NAs of these lenses are calculated. The numerical simulation results demonstrate that the proposed design can focus the X-ray beam into sub-nanometer while remaining high gain.
基金supported by the National Grand Instrument Project(Grant No.2019YFF01014402)the National Key Research and Development Program of China(Grant No.2024YFF0726304)+2 种基金the Guangdong High Level Innovation Research Institute(Grant No.2021B0909050006)the National Natural Science Foundation of China(Grant No.12205008)W.Ma acknowledges support from the National Science Fund for Distinguished Young Scholars(Grant No.12225501)。
文摘Ultra-intense electromagnetic fields exceeding 10^(23)W∕cm^(2)are enabling breakthroughs in compact laser-driven particle accelerators and revealing new quantum electrodynamics(QED)phenomena.However,conventional laser-focusing methods face considerable engineering challenges and require substantial costs.Focusing schemes utilizing plasma optics can produce sub-micrometer focus spots beyond the diffraction limit and substantially enhance the peak intensity;however,owing to significant energy dissipation,they may fail to simultaneously increase the laser fluence.To address these challenges,we propose a focusing scheme employing a near-critical-density hollow plasma fiber(HPF)that utilizes graded refractive index dynamics to boost both laser peak intensity and fluence at the same time.Three-dimensional particle-in-cell simulations demonstrate the HPF’s capability to focus a 4.5-μm-diameter Gaussian beam to a sub-diffraction-limited 0.6-μm-diameter spot.The peak intensity and laser fluence can be enhanced by factors of 22 and 10,respectively,marking a substantial improvement over existing plasma-based focusing schemes.Furthermore,the proposed scheme exhibits wide-range parameter adaptation and high robustness,making it suitable for direct implementation in PW-class ultra-intense laser experiments.
基金Project supported by the National Natural Science Foundation of China(Grant No.12404531)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province,China(Grant No.23KJB140011)。
文摘Efficient elastic wave focusing is crucial in materials and physical engineering.Elastic coding metasurfaces,which are innovative planar artificial structures,show great potential for use in the field of wave focusing.However,elastic coding lenses(ECLs)still suffer from low focusing performance,thickness comparable to wavelength,and frequency sensitivity.Here,we consider both the structural and material properties of the coding unit,thus realizing further compression of the thickness of the ECL.We chose the simplest ECL,which consists of only two encoding units.The coding unit 0 is a straight structure constructed using a carbon fiber reinforced composite material,and the coding unit 1 is a zigzag structure constructed using an aluminum material,and the thickness of the ECL constructed using them is only 1/8 of the wavelength.Based on the theoretical design,the arrangement of coding units is further optimized using genetic algorithms,which significantly improves the focusing performance of the lens at different focus and frequencies.This study provides a more effective way to control vibration and noise in advanced structures.
基金supported by the National Natural Science Foundation of China(Grant No.12374416)。
文摘Adjustable or programmable metamaterials offer versatile functions,while the complex multi-dimensional regulation increases workload,and hinders their applications in practical scenarios.To address these challenges,we present a mechanically programmable acoustic metamaterial for real-time focal tuning via one-dimensional phase-gradient modulation in this paper.The device integrates a phase gradient structure with concave cavity channels and an x-shaped telescopic mechanical framework,enabling dynamic adjustment of inter-unit spacing(1 mm-3 mm)through a microcontroller-driven motor.By modulating the spacing between adjacent channels,the phase gradient is precisely controlled,allowing continuous focal shift from 50 mm to 300 mm along the x-axis at 7500 Hz.Broadband focusing is also discussed in the range6800 Hz-8100 Hz,with transmission coefficients exceeding 0.5,ensuring high efficiency and robust performance.Experimental results align closely with simulations,validating the design's effectiveness and adaptability.Unlike conventional programmable metamaterials requiring multi-dimensional parameter optimization,this approach simplifies real-time control through single-axis mechanical adjustment,significantly reducing operational complexity.Due to the advantages of broadband focusing,simple control mode,real-time monitoring,and so on,the device may have extensive applications in the fields of acoustic imaging,nondestructive testing,ultrasound medical treatment,etc.
基金supported by the National Natural Science Foundation of China(Grants U22A2008,12404484,12464016,and 62405219)the Double First Class Joint Special Key Project of Yunnan Science and Technology Department and Yunnan University(Grant 202401BF070001-012)Sichuan Provincial Science and Technology Support Program(Grant 25QNJJ2419).
文摘Dynamically tunable terahertz(THz)beam focusing plays a critical role in emerging applications including reconfigurable imaging,localized spectral analysis,and micro-machining.Conventional methods,however,frequently employ complex wavefront modulators and external control algorithms,resulting in increased system footprint and limited tuning efficiency.In this work,we present an all-silicon mechanically rotatable cascaded metasurface capable of dynamic THz beam focusing.By independently adjusting the relative rotation angles between the two metasurface layers,real-time repositioning of the focal spot is achieved for orthogonal circular polarization channels.The proposed design facilitates polarization-division multiplexing without requiring external algorithms or active materials while preserving high focusing efficiency and beam quality across a predefined focal plane.Numerical simulations reveal a quasi-linear shift of the focal position with the rotation angle,with stable focusing efficiency and full-width at half-maximum observed in both polarization channels.This strategy offers an efficient and reliable approach to dynamic wavefront control for compact,reconfigurable THz imaging,sensing,and communication systems.
基金supported in part by the Oil&Gas Major Project of China,Grant No.2025ZD1401105National Natural Science Foundation of China,Grant Nos.42474152,U23B2086 and 42374150+1 种基金Shandong Provincial Natural Science Foundation,Grant No.ZR2023MD053the CNPC Innovation Foundation,Grant No.2024DQ02-0152.
文摘We have developed a novel method for correcting resistivity anisotropy in array induction logging(AIL)for shale reservoirs drilled with horizontal wells.This method is featured by two aspects:simplifying software focusing(SF)algorithm from two-dimensional(2D)to one-dimensional(1D)and approximately decoupling the resistivity anisotropy effect.Initially,the typical raw and focused AIL responses are simulated to determine the applicability of the 2D SF algorithm in deviated and horizontal wells.The non-necessity of SF algorithm along vertical direction is also proved for the pure horizontal wells.Subsequently,a 1D SF algorithm that focuses only along the radial direction in horizontal wells is developed to replace the original 2D SF algorithm.This new method eliminates the opacity of traditional SF algorithms and can be easily applied to different AIL tools.The sensitivity of AIL to resistivity anisotropy in homogeneous and layered formations is then discussed,showing that the anisotropy effect can be separated from other effects.Finally,an efficient anisotropy correction scheme using the Levenberg-Marquardt algorithm is established to quickly and accurately correct AIL data in horizontal wells.Results from simulated and measured data demonstrate that this new method effectively removes the anisotropy effect and provides accurate horizontal resistivity for shale beds drilled with horizontal wells.Compared with existing methods,it is significantly faster and compatible with AIL tools from various companies,laying solid foundation for the interpretation and evaluation of shale reservoirs in horizontal wells.
基金supported by Joachim Herz Stiftungthe Helmholtz Association through program-oriented funds.
文摘Multilayer Laue lenses are volume diffraction elements for the efficient focusing of X-rays.With a new manufacturing technique that we introduced,it is possible to fabricate lenses of sufficiently high numerical aperture(NA)to achieve focal spot sizes below 10 nm.The alternating layers of the materials that form the lens must span a broad range of thicknesses on the nanometer scale to achieve the necessary range of X-ray deflection angles required to achieve a high NA.This poses a challenge to both the accuracy of the deposition process and the control of the materials properties,which often vary with layer thickness.We introduced a new pair of materials—tungsten carbide and silicon carbide—to prepare layered structures with smooth and sharp interfaces and with no material phase transitions that hampered the manufacture of previous lenses.Using a pair of multilayer Laue lenses(MLLs)fabricated from this system,we achieved a two-dimensional focus of 8.4×6.8 nm2 at a photon energy of 16.3 keV with high diffraction efficiency and demonstrated scanning-based imaging of samples with a resolution well below 10 nm.The high NA also allowed projection holographic imaging with strong phase contrast over a large range of magnifications.An error analysis indicates the possibility of achieving 1 nm focusing.
基金financial support from the National Key R&D Program of China(No.2022YFE0204100)the National Natural Science Foundation of China(Nos.U23B20152 and 52402479)。
文摘Hall thrusters with large height-radius ratio,owing to their unique advantages in compactness,lightweight,and high performance,have progressively emerged as a preferred choice for diverse space propulsion applications in the future.However,the amplification of the annular effect in structures with a large height-radius ratio poses a practical problem of plume over-focusing,which seriously restricts the further improvement of Hall thruster performance and the extension of its life.In this study,the formation mechanism of over-focused plume is deeply investigated,and it is ascertained that an intensified radial electric field directed towards the inner wall within the channel serves as a key contributing factor.This phenomenon is fundamentally attributed to structural characteristics of large height-radius ratio that induce pronounced inward inclination of field lines within strong magnetic field zone.Based on this,the design concept of focused magnetic field is proposed,wherein straight magnetic field lines are established within the strong magnetic field zone to generate a quasi-axial accelerating electric field.Simultaneously,the symmetrical magnetic field inside the channel ensures ionization concentration near the channel center,thereby achieving optimal matching between the ionization zone and accelerating field.Experimental results demonstrate that employing a focused magnetic field significantly reduces the divergence half-angle of the plume and yields an excellently barrel-shaped focusing plume morphology in HEP-1350PM.Consequently,the total efficiency of the thruster surpasses 60%,while erosion belt on the inner wall is shortened by nearly 50%.These advancements effectively enhance thruster performance and prolong its operational lifespan.This study can not only resolve practical problems associated with plume over-focusing,but also provide a fundamental guiding principle for magnetic field design of Hall thrusters.
基金the National Natural Science Foundation of China(52276026).
文摘This study utilizes a visualization nozzle and spray experimental platform to experimentally investigate the flow focusing/blurring nozzle.It is found that the working mode of the nozzle transitions from flow focusing to flow transition and eventually to flow blurring as the gas flow rate increases or the tube hole distance decreases.Conversely,an increase in liquid flow rate only facilitates the transition from flow focusing to flow transition.Changes in the gas/liquid flow rate or tube hole distance influence the gas shear effect and the gas inertial impact effect inside the nozzle,which in turn alters the working mode.An increase in gas flow rate results in a shift of the droplet size distribution towards smaller particle sizes in the flow blurring mode,whereas an increase in liquid flow rate produces the opposite effect.Notably,the impact of the gas flow rate on these changes is more pronounced than that of the liquid flow rate.
