Fitting of full X-ray diffraction patterns is an effective method for quantifying abundances during X-ray diffraction (XRD) analyses. The method is based on the principal that the observed diffraction pattern is the s...Fitting of full X-ray diffraction patterns is an effective method for quantifying abundances during X-ray diffraction (XRD) analyses. The method is based on the principal that the observed diffraction pattern is the sum of the individual phases that compose the sample. By adding an internal standard (usually corundum) to both the observed patterns and to those for individual pure phases (standards), all patterns can all be normalized to an equivalent intensity based on the internal standard intensity. Using least-squares refinement, the individual phase proportions are varied until an optimal match is reached. As the fitting of full patterns uses the entire pattern, including background, disordered and amorphous phases are explicitly considered as individual phases, with their individual intensity profiles or “amorphous humps” included in the refinement. The method can be applied not only to samples that contain well-ordered materials, but it is particularly well suited for samples containing amorphous and/or disordered materials. In cases with extremely disordered materials where no crystal structure is available for Rietveld refinement or there is no unique intensity area that can be measured for a traditional RIR analysis, full-pattern fitting may be the best or only way to readily obtain quantitative results. This approach is also applicable in cases where there are several coexisting highly disordered phases. As all phases are considered as discrete individual components, abundances are not constrained to sum to 100%.展开更多
A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtai...A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.展开更多
A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as ...A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.展开更多
A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as ...A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.展开更多
A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical ph...A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical phase to the analyzed sample is not required in this method and the experimental results are satisfactory.展开更多
A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample ...A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.展开更多
Based on the X-ray scattering intensity theory,the correction factors of the degree of crystallinity formulae of the multicomponent polymers have been clearly defined.The formula of degree of erystallinity of the mult...Based on the X-ray scattering intensity theory,the correction factors of the degree of crystallinity formulae of the multicomponent polymers have been clearly defined.The formula of degree of erystallinity of the multicomponent polymers was derived in terms of the WAXD theory ahd improved graphic multipeak resolution methods.The results calculated are compatible with the density measurement.展开更多
Accuracy of coeffcient A_(isp) is related to the reference phase chosen during analysis. The cri- terion of choosing reference phase which may minimize the error of A_(isp) was deduced. The optimum results could be ob...Accuracy of coeffcient A_(isp) is related to the reference phase chosen during analysis. The cri- terion of choosing reference phase which may minimize the error of A_(isp) was deduced. The optimum results could be obtained by using the method of least squares if the number of sam- pies for analysis is more than the phase in samples. The procedure presented here is satisfacto- ryfor ordinary phase analysis.展开更多
To explore ways to improve the accuracy of quantitative analysis of samples in the micrometer to nanometer range of magnitudes,we adopted analytical transmission electron microscopy(AEM/EDS)for qualitative and quantit...To explore ways to improve the accuracy of quantitative analysis of samples in the micrometer to nanometer range of magnitudes,we adopted analytical transmission electron microscopy(AEM/EDS)for qualitative and quantitative analysis of pyrite materials.Additionally,the k factor of pyrite is calculated experimentally.To develop an appropriate non-standard quantitative analysis model for pyrite materials,the experimentally calculated k factor is compared with that estimated from the non-standard quantitative analytical model of the instrument software.The experimental findings demonstrate that the EDS attached to a TEM can be employed for precise quantitative analysis of micro-and nanoscale regions of pyrite materials.Furthermore,it serves as a reference for improving the results of the EDS quantitative analysis of other sulfides.展开更多
Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gra...Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gradient. X-ray diffraction method widely used for stress measurements has some difficulties in interpretation of experimental data, when the depth of X-ray penetration is compared with thickness of surface layer where inhomogeneous stress distribution is localized. Early it has been shown by authors that diffraction line broadening occurs when analyzed surface is characterized by strong gradient. The interest to study the diffraction line broadening is connected to the possibility of obtaining information about parameters of surface stress distribution. In the present paper the convolution and deconvolution concepts of Fourier analysis were applied to study X ray diffraction line broadening caused by surface stress gradients. Developed methodology allows determining of stress distribution in superficial layers of materials.展开更多
The properties of synthetic graphite materials, widely used in advanced fields, are determined by their structure, which is formed in the process of high-temperature (~2500<span style="white-space:normal;"...The properties of synthetic graphite materials, widely used in advanced fields, are determined by their structure, which is formed in the process of high-temperature (~2500<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C) heat treatment. The fine structure of a graphitizing carbon material based on petroleum coke containing 1.3 wt% S at various stages of graphitization was studied by X-ray diffraction analysis. Some of the samples contained the addition of dispersed Fe<sub>2</sub>O<sub>3</sub>. It is shown that the heat-treated material in the range 1200<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C - 2600<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C is heterogeneous, its component composition is determined by the processing temperature and the presence of Fe<sub>2</sub>O<sub>3</sub> additive. The observed dependence of the component composition on the heat treatment temperature suggests that the process of graphitization of the carbon material, apparently, develops through a number of metastable states.展开更多
Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and ...Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and quantifying these superstructures hinder the optimization of pyrrhotite depression in flotation processes.To address this critical issue,synchrotron X-ray powder diffraction(S-XRPD)with Rietveld refinement was employed to quantify the distribution of superstructures in the feed and flotation concentrates of a copper–gold ore.To elucidate the mechanisms influencing depression,density functional theory(DFT)calculations were conducted to explore the electronic structures and surface reactivity of the pyrrhotite superstructures toward the adsorption of water,oxygen and hydroxyl ions(OH-)as dominant species present in the flotation process.S-XRPD analysis revealed that flotation recovery rates of pyrrhotite followed the order of 4C<6C<5C.DFT calculations indicated that the Fe 3d and S 3p orbital band centers exhibited a similar trend relative to the Fermi level with 4C being the closest.The Fe3d band center suggested that the 4C structure possessed a more reactive surface toward the oxygen reduction reaction,promoting the formation of hydrophilic Fe-OH sites.The S 3p band center order also implied that xanthate on the non-magnetic 5C and 6C surfaces could oxidize to dixanthogen,increasing hydrophobicity and floatability,while 4C formed less hydrophobic metal-xanthate complexes.Adsorption energy and charge transfer analyses of water,hydroxyl ions and molecular oxygen further supported the high reactivity and hydrophilic nature of 4C pyrrhotite.The strong bonding with hydroxyl ions indicated enhanced surface passivation by hydrophilic Fe–OOH complexes,aligning with the experimentally observed flotation order(4C<6C<5C).These findings provide a compelling correlation between experimental flotation results and electronic structure calculations,delivering crucial insights for optimizing flotation processes and improving pyrrhotite depression.This breakthrough opens up new opportunities to enhance the efficiency of flotation processes in the mining industry.展开更多
Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag ha...Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag has been performed by the Rietveld method based on the powder X-ray diffraction(XRD) with the aid of noncommercial software GSAS-EXPGUI.A known weight of crystalline internal standard(10% CaF_2) was added to the calcium silicate slag to calculate the fraction of amorphous phase and other crystalline phases on an absolute basis.Besides,the calcium silicate slag was characterized by X-ray fluorescence(XRF) and thermo gravimetric(TG) differential scanning calorimetry(DSC) to test the QPA results and investigate its other characters.Finally,the results show that the amorphous fraction is 17.5%(hereinafter,the percentages refer to the mass fraction),and the major crystalline phases detected in the calcium silicate slag consist of 23.5% Beta-Ca_2 SiO_4,10.0% bredigite,10.3% Ca_3Al_2O_6(C_3A) and 21.6% CaCO_3.展开更多
In this paper,the cement clinkers from various industrial Kilns were investigated by a superposing peaks method for X-ray quantitative analysis(XRQA)of clinker minerals,the results show that the clinker mineral conten...In this paper,the cement clinkers from various industrial Kilns were investigated by a superposing peaks method for X-ray quantitative analysis(XRQA)of clinker minerals,the results show that the clinker mineral contents measured by XRQA method better accord with the reality of clinkers made in different conditions than theoretic contents calculated by Bouge formula do.The measured contents of C3S of clinkers manufactured in rotary kilns are higher than theoretically calculated values,whereas,the results of clinker man manufactured in shaft kilns are contrary to that.This is because in rotary kiln,the raw meals are fully pre-heated and have high sintering temperature,the clinkers are well solid-solutioned and rapidly cooled,on the contrary,owing to the struetural defects,it is easy to exist reducing atmosphere and lower temperature in shaft kiln,moreover the cooling rate is slower,all these can evidently Lead to worse clinker quality.Adding CaF2-Ca-SO4 complex mineralizer can remarkably modify the sintering situation in shaft kiln,especially can evidently increase C3S content and make it well crystallized,therefore,im prove the sintered quality of clinker.展开更多
Flupirtine maleate, a pharmaceutical compound for treating psychotic disease in clinics, has seven polymorphs. Form A, with better crystal stability and bioavailability, has been widely used as the pharmaceutical crys...Flupirtine maleate, a pharmaceutical compound for treating psychotic disease in clinics, has seven polymorphs. Form A, with better crystal stability and bioavailability, has been widely used as the pharmaceutical crystal form. Unfortunately, it is usually found in a polymorphic mixture with form B. In this study, pure crystal forms of A and B were prepared and characterized by X-ray powder diffraction （XRPD）, Fourier transform infrared spectroscopy （FT-IR） and thermal analysis. An XRPD-based method for the quantitative determination of the amount of the flupirtine maleate polymorphs form A and form B was also established through a systematic optimization of instrumental parameters. The results of the analytical methodology validation showed that the XPRD method had a broad quantitative range of 0- 100% （w/w）, good linear relationship, with R2= 0.999, excellent repeatability and precision and low limits of detection （LoD） of 0.15% （w/w） and quantification （LoQ） of 0.5% （w/w）. The results also showed that the single-peak method was not as good as the whole pattern in reducing the influence of the preferred orientation, but this can be compensated for by a systematic optimization of instrumental parameters and validating the analytical methodology to reduce errors and obtain a good, repeatable, sensitive, and accurate method. This XRPD method can be used to analyze mixtures of flupirtine maleate polymorphs （forms A and B） quantitatively and control the quality of the bulk drug.展开更多
The density,nature of the dislocations and distribution of the domain sizes in cold-deformed Pb-Ca-Sn solid solution were determined by X-ray diffraction profile analysis.The dislocation densities are of the order of ...The density,nature of the dislocations and distribution of the domain sizes in cold-deformed Pb-Ca-Sn solid solution were determined by X-ray diffraction profile analysis.The dislocation densities are of the order of 1010 cm-2.The strain broadening of diffraction profiles was accounted for by dislocation contrast factor.The coherent domain size was determined by the recently developed PM2K software package.Assuming that the domain size distribution is log-normal,the distribution function（median μ and variance σ） was calculated from the size parameters determined from X-ray diffraction profile analysis.展开更多
CuKβ radiation with a wavelength of λ = 1.3923 ? is recommended for crystal structure determination from X-ray powder diffraction using the Rietfeld method. A highly sensitive image plate detector is able to collect...CuKβ radiation with a wavelength of λ = 1.3923 ? is recommended for crystal structure determination from X-ray powder diffraction using the Rietfeld method. A highly sensitive image plate detector is able to collect enough intensity to record a brilliant X-ray powder pattern in a reasonable time, compared to CuKα1 radiation used today. Especially atomic displacement coefficients could be determined more precisely with the much greater number of reflections recorded. A double-radius Guinier camera attached to a micro-focus rotating anode tube ensures increased brilliance besides high resolution. A simple construction specification is presented to make smart cylindrically bent Ge(111) or Si(111) X-ray monochromators that deliver focused CuKβ radiation. The highly linear response of image plate detectors allows removing of fluorescence radiation simply as background of the pattern. The proposed equipment is a cost-efficient alternative to a liquid gallium-metal-jet X-ray source with maximum power load and a similar wavelength of λ(GaKα1) = 1.34013 ?.展开更多
Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the specia...Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the speciation of P and the leaching conditions.In this study,hydrochloric acid was used as a leaching agent,and the effects of the hydrochloric acid concentration,leaching time,temperature,and liquid-solid ratio on the P leaching ratio were investigated.Furthermore,the co-leaching of macro-metals Ca,Al,Fe,and Mg was analyzed.The results showed that P leached rapidly within 30 min,where the leaching rate reached more than 80%and then gradually stabilized.The leaching concentrations of Ca and Mg had a significant correlation(correlation coefficient r^(2)>0.90),and both were leached completely.Al and P had similar leaching patterns,where the leaching rates increased initially and then decreased with time at 0.2 mol/L HCl.According to X-ray diffraction analysis and Rietveld refinement,the P in ISSA was mainly present in the forms of Mg_(3)Ca_(3)(PO_(4))_(4) and AlPO_(4).When leached using 0.2 mol/L HCl at 55℃ with a liquid-to-solid ratio of 20 L/kg,the AlPO_(4) and Fe_(3)(H_(2)O)_(3)(PO_(4))_(2) in ISSA dissolved initially and then precipitated on the surface of the solid phase,thereby impeding further P leaching.展开更多
X-ray diffraction (XRD) peaks in a low-angle diffraction section of clayminerals, especially those of authigenic origin, have broadening and tailing features in shape.Using the five basic parameters, peak position, pe...X-ray diffraction (XRD) peaks in a low-angle diffraction section of clayminerals, especially those of authigenic origin, have broadening and tailing features in shape.Using the five basic parameters, peak position, peak height, width, shape coefficient and asymmetry,to describe an XRD peak is more accurate, comprehensive and integrated than using only 3 of them,position, height and width. Following the concept of the five basic parameters of an XRD peak, theprogram Decoform proposed in this study provides more information in mineralogical analyses byfitting actual XRD profiles. In combination with the HW-IR plot, Decoform can he systematically andaccurately used in the comprehensive analyses of crystallinity, domain size, lattice strain andquantitative phase. It is also of value for the geological investigations of diagenesis,metamorphism, basin maturity, structural stress field and so on.展开更多
Eu 2Mn 2/3Ta 4/3O 7 specimen was synthesized from Eu 2O 3, MnO and Ta 2O 5 in a reducing atmosphere. Structure analysis was carried out by Rietveld method from X-ray diffraction data. The X-ray diffraction...Eu 2Mn 2/3Ta 4/3O 7 specimen was synthesized from Eu 2O 3, MnO and Ta 2O 5 in a reducing atmosphere. Structure analysis was carried out by Rietveld method from X-ray diffraction data. The X-ray diffraction profile calculated with monoclinic C2/c model was in a good agreement with the observed X-ray diffraction patterns since several small peaks of super lattice could be also assigned with C2/c symmetry in addition to fundamental reflection peaks. Eu 2Mn 2/3Ta 4/3O 7 has two kinds of distorted (Mn, Ta)O 6 octahedra and HTB layers, which deviates from the regular forms. Europium atoms coordinate to eight or seven oxygen atoms and lead to two kinds of polyhedra, EuO 8 and EuO 7 in this compound.展开更多
文摘Fitting of full X-ray diffraction patterns is an effective method for quantifying abundances during X-ray diffraction (XRD) analyses. The method is based on the principal that the observed diffraction pattern is the sum of the individual phases that compose the sample. By adding an internal standard (usually corundum) to both the observed patterns and to those for individual pure phases (standards), all patterns can all be normalized to an equivalent intensity based on the internal standard intensity. Using least-squares refinement, the individual phase proportions are varied until an optimal match is reached. As the fitting of full patterns uses the entire pattern, including background, disordered and amorphous phases are explicitly considered as individual phases, with their individual intensity profiles or “amorphous humps” included in the refinement. The method can be applied not only to samples that contain well-ordered materials, but it is particularly well suited for samples containing amorphous and/or disordered materials. In cases with extremely disordered materials where no crystal structure is available for Rietveld refinement or there is no unique intensity area that can be measured for a traditional RIR analysis, full-pattern fitting may be the best or only way to readily obtain quantitative results. This approach is also applicable in cases where there are several coexisting highly disordered phases. As all phases are considered as discrete individual components, abundances are not constrained to sum to 100%.
文摘A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.
文摘A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.
文摘A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.
文摘A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical phase to the analyzed sample is not required in this method and the experimental results are satisfactory.
文摘A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.
文摘Based on the X-ray scattering intensity theory,the correction factors of the degree of crystallinity formulae of the multicomponent polymers have been clearly defined.The formula of degree of erystallinity of the multicomponent polymers was derived in terms of the WAXD theory ahd improved graphic multipeak resolution methods.The results calculated are compatible with the density measurement.
文摘Accuracy of coeffcient A_(isp) is related to the reference phase chosen during analysis. The cri- terion of choosing reference phase which may minimize the error of A_(isp) was deduced. The optimum results could be obtained by using the method of least squares if the number of sam- pies for analysis is more than the phase in samples. The procedure presented here is satisfacto- ryfor ordinary phase analysis.
基金Funded by the International Science&Technology Cooperation Program of Hubei Province of China(No.2022EHB024)。
文摘To explore ways to improve the accuracy of quantitative analysis of samples in the micrometer to nanometer range of magnitudes,we adopted analytical transmission electron microscopy(AEM/EDS)for qualitative and quantitative analysis of pyrite materials.Additionally,the k factor of pyrite is calculated experimentally.To develop an appropriate non-standard quantitative analysis model for pyrite materials,the experimentally calculated k factor is compared with that estimated from the non-standard quantitative analytical model of the instrument software.The experimental findings demonstrate that the EDS attached to a TEM can be employed for precise quantitative analysis of micro-and nanoscale regions of pyrite materials.Furthermore,it serves as a reference for improving the results of the EDS quantitative analysis of other sulfides.
文摘Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gradient. X-ray diffraction method widely used for stress measurements has some difficulties in interpretation of experimental data, when the depth of X-ray penetration is compared with thickness of surface layer where inhomogeneous stress distribution is localized. Early it has been shown by authors that diffraction line broadening occurs when analyzed surface is characterized by strong gradient. The interest to study the diffraction line broadening is connected to the possibility of obtaining information about parameters of surface stress distribution. In the present paper the convolution and deconvolution concepts of Fourier analysis were applied to study X ray diffraction line broadening caused by surface stress gradients. Developed methodology allows determining of stress distribution in superficial layers of materials.
文摘The properties of synthetic graphite materials, widely used in advanced fields, are determined by their structure, which is formed in the process of high-temperature (~2500<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C) heat treatment. The fine structure of a graphitizing carbon material based on petroleum coke containing 1.3 wt% S at various stages of graphitization was studied by X-ray diffraction analysis. Some of the samples contained the addition of dispersed Fe<sub>2</sub>O<sub>3</sub>. It is shown that the heat-treated material in the range 1200<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C - 2600<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C is heterogeneous, its component composition is determined by the processing temperature and the presence of Fe<sub>2</sub>O<sub>3</sub> additive. The observed dependence of the component composition on the heat treatment temperature suggests that the process of graphitization of the carbon material, apparently, develops through a number of metastable states.
基金supported by the Australian Research Council Linkage Project(No.LP200200717)co sponsored by Newmont Corporation(United States)and Vega Industries(India)+1 种基金the Powder Diffraction Beamline at the Australia’s Nuclear Science and Technology Organisation(No.PDR19870),Australiathe Centre for Microscopy and Microanalysis at the University of Queensland(No.1366),Australia。
文摘Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and quantifying these superstructures hinder the optimization of pyrrhotite depression in flotation processes.To address this critical issue,synchrotron X-ray powder diffraction(S-XRPD)with Rietveld refinement was employed to quantify the distribution of superstructures in the feed and flotation concentrates of a copper–gold ore.To elucidate the mechanisms influencing depression,density functional theory(DFT)calculations were conducted to explore the electronic structures and surface reactivity of the pyrrhotite superstructures toward the adsorption of water,oxygen and hydroxyl ions(OH-)as dominant species present in the flotation process.S-XRPD analysis revealed that flotation recovery rates of pyrrhotite followed the order of 4C<6C<5C.DFT calculations indicated that the Fe 3d and S 3p orbital band centers exhibited a similar trend relative to the Fermi level with 4C being the closest.The Fe3d band center suggested that the 4C structure possessed a more reactive surface toward the oxygen reduction reaction,promoting the formation of hydrophilic Fe-OH sites.The S 3p band center order also implied that xanthate on the non-magnetic 5C and 6C surfaces could oxidize to dixanthogen,increasing hydrophobicity and floatability,while 4C formed less hydrophobic metal-xanthate complexes.Adsorption energy and charge transfer analyses of water,hydroxyl ions and molecular oxygen further supported the high reactivity and hydrophilic nature of 4C pyrrhotite.The strong bonding with hydroxyl ions indicated enhanced surface passivation by hydrophilic Fe–OOH complexes,aligning with the experimentally observed flotation order(4C<6C<5C).These findings provide a compelling correlation between experimental flotation results and electronic structure calculations,delivering crucial insights for optimizing flotation processes and improving pyrrhotite depression.This breakthrough opens up new opportunities to enhance the efficiency of flotation processes in the mining industry.
基金the National Natural Science Foundation of China(Nos.51302012 and 51274042)the China Postdoctoral Science Foundation Funded Project(No.2016T90034)the Inner Mongolia Science and Technology Major Projects 2013
文摘Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag has been performed by the Rietveld method based on the powder X-ray diffraction(XRD) with the aid of noncommercial software GSAS-EXPGUI.A known weight of crystalline internal standard(10% CaF_2) was added to the calcium silicate slag to calculate the fraction of amorphous phase and other crystalline phases on an absolute basis.Besides,the calcium silicate slag was characterized by X-ray fluorescence(XRF) and thermo gravimetric(TG) differential scanning calorimetry(DSC) to test the QPA results and investigate its other characters.Finally,the results show that the amorphous fraction is 17.5%(hereinafter,the percentages refer to the mass fraction),and the major crystalline phases detected in the calcium silicate slag consist of 23.5% Beta-Ca_2 SiO_4,10.0% bredigite,10.3% Ca_3Al_2O_6(C_3A) and 21.6% CaCO_3.
文摘In this paper,the cement clinkers from various industrial Kilns were investigated by a superposing peaks method for X-ray quantitative analysis(XRQA)of clinker minerals,the results show that the clinker mineral contents measured by XRQA method better accord with the reality of clinkers made in different conditions than theoretic contents calculated by Bouge formula do.The measured contents of C3S of clinkers manufactured in rotary kilns are higher than theoretically calculated values,whereas,the results of clinker man manufactured in shaft kilns are contrary to that.This is because in rotary kiln,the raw meals are fully pre-heated and have high sintering temperature,the clinkers are well solid-solutioned and rapidly cooled,on the contrary,owing to the struetural defects,it is easy to exist reducing atmosphere and lower temperature in shaft kiln,moreover the cooling rate is slower,all these can evidently Lead to worse clinker quality.Adding CaF2-Ca-SO4 complex mineralizer can remarkably modify the sintering situation in shaft kiln,especially can evidently increase C3S content and make it well crystallized,therefore,im prove the sintered quality of clinker.
基金supported by the Major Program of Ministry of Science and Technology of China(No:2015ZX09J15104-003002)
文摘Flupirtine maleate, a pharmaceutical compound for treating psychotic disease in clinics, has seven polymorphs. Form A, with better crystal stability and bioavailability, has been widely used as the pharmaceutical crystal form. Unfortunately, it is usually found in a polymorphic mixture with form B. In this study, pure crystal forms of A and B were prepared and characterized by X-ray powder diffraction （XRPD）, Fourier transform infrared spectroscopy （FT-IR） and thermal analysis. An XRPD-based method for the quantitative determination of the amount of the flupirtine maleate polymorphs form A and form B was also established through a systematic optimization of instrumental parameters. The results of the analytical methodology validation showed that the XPRD method had a broad quantitative range of 0- 100% （w/w）, good linear relationship, with R2= 0.999, excellent repeatability and precision and low limits of detection （LoD） of 0.15% （w/w） and quantification （LoQ） of 0.5% （w/w）. The results also showed that the single-peak method was not as good as the whole pattern in reducing the influence of the preferred orientation, but this can be compensated for by a systematic optimization of instrumental parameters and validating the analytical methodology to reduce errors and obtain a good, repeatable, sensitive, and accurate method. This XRPD method can be used to analyze mixtures of flupirtine maleate polymorphs （forms A and B） quantitatively and control the quality of the bulk drug.
文摘The density,nature of the dislocations and distribution of the domain sizes in cold-deformed Pb-Ca-Sn solid solution were determined by X-ray diffraction profile analysis.The dislocation densities are of the order of 1010 cm-2.The strain broadening of diffraction profiles was accounted for by dislocation contrast factor.The coherent domain size was determined by the recently developed PM2K software package.Assuming that the domain size distribution is log-normal,the distribution function（median μ and variance σ） was calculated from the size parameters determined from X-ray diffraction profile analysis.
文摘CuKβ radiation with a wavelength of λ = 1.3923 ? is recommended for crystal structure determination from X-ray powder diffraction using the Rietfeld method. A highly sensitive image plate detector is able to collect enough intensity to record a brilliant X-ray powder pattern in a reasonable time, compared to CuKα1 radiation used today. Especially atomic displacement coefficients could be determined more precisely with the much greater number of reflections recorded. A double-radius Guinier camera attached to a micro-focus rotating anode tube ensures increased brilliance besides high resolution. A simple construction specification is presented to make smart cylindrically bent Ge(111) or Si(111) X-ray monochromators that deliver focused CuKβ radiation. The highly linear response of image plate detectors allows removing of fluorescence radiation simply as background of the pattern. The proposed equipment is a cost-efficient alternative to a liquid gallium-metal-jet X-ray source with maximum power load and a similar wavelength of λ(GaKα1) = 1.34013 ?.
基金supported by the Major Science and Technology Program for Water Pollution Control and Treatment(2017ZX07202005).
文摘Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the speciation of P and the leaching conditions.In this study,hydrochloric acid was used as a leaching agent,and the effects of the hydrochloric acid concentration,leaching time,temperature,and liquid-solid ratio on the P leaching ratio were investigated.Furthermore,the co-leaching of macro-metals Ca,Al,Fe,and Mg was analyzed.The results showed that P leached rapidly within 30 min,where the leaching rate reached more than 80%and then gradually stabilized.The leaching concentrations of Ca and Mg had a significant correlation(correlation coefficient r^(2)>0.90),and both were leached completely.Al and P had similar leaching patterns,where the leaching rates increased initially and then decreased with time at 0.2 mol/L HCl.According to X-ray diffraction analysis and Rietveld refinement,the P in ISSA was mainly present in the forms of Mg_(3)Ca_(3)(PO_(4))_(4) and AlPO_(4).When leached using 0.2 mol/L HCl at 55℃ with a liquid-to-solid ratio of 20 L/kg,the AlPO_(4) and Fe_(3)(H_(2)O)_(3)(PO_(4))_(2) in ISSA dissolved initially and then precipitated on the surface of the solid phase,thereby impeding further P leaching.
基金the National Natural Science Foundation of China (Grant No.49872033) the special pre-research project of the Basic Scientific Program.the Ministry of Science and Technology of China (Grant No. 2001CCA02400).
文摘X-ray diffraction (XRD) peaks in a low-angle diffraction section of clayminerals, especially those of authigenic origin, have broadening and tailing features in shape.Using the five basic parameters, peak position, peak height, width, shape coefficient and asymmetry,to describe an XRD peak is more accurate, comprehensive and integrated than using only 3 of them,position, height and width. Following the concept of the five basic parameters of an XRD peak, theprogram Decoform proposed in this study provides more information in mineralogical analyses byfitting actual XRD profiles. In combination with the HW-IR plot, Decoform can he systematically andaccurately used in the comprehensive analyses of crystallinity, domain size, lattice strain andquantitative phase. It is also of value for the geological investigations of diagenesis,metamorphism, basin maturity, structural stress field and so on.
文摘Eu 2Mn 2/3Ta 4/3O 7 specimen was synthesized from Eu 2O 3, MnO and Ta 2O 5 in a reducing atmosphere. Structure analysis was carried out by Rietveld method from X-ray diffraction data. The X-ray diffraction profile calculated with monoclinic C2/c model was in a good agreement with the observed X-ray diffraction patterns since several small peaks of super lattice could be also assigned with C2/c symmetry in addition to fundamental reflection peaks. Eu 2Mn 2/3Ta 4/3O 7 has two kinds of distorted (Mn, Ta)O 6 octahedra and HTB layers, which deviates from the regular forms. Europium atoms coordinate to eight or seven oxygen atoms and lead to two kinds of polyhedra, EuO 8 and EuO 7 in this compound.
