针对X-Y平台中模型误差和扰动未知等问题,本文以夹胶玻璃自动切膜为应用背景,设计自动切膜恒力控制系统,并对系统中的交互力进行分析与建模。提出了一种改进线性自抗扰(linear active disturbance rejection controller,LADRC)力控制器...针对X-Y平台中模型误差和扰动未知等问题,本文以夹胶玻璃自动切膜为应用背景,设计自动切膜恒力控制系统,并对系统中的交互力进行分析与建模。提出了一种改进线性自抗扰(linear active disturbance rejection controller,LADRC)力控制器,将滑模控制嵌入到基于预报的线性跟踪微分器(tracking differentiator,TD)中,平衡滤波与相位滞后间的矛盾,利用分数阶比例微分(fractional order proportion differentiation,FOPD)快速响应跟踪力误差,并通过Lyapunov函数对改进线性跟踪微分器进行稳定性证明。通过与线性自抗扰进行比较,对所设计的控制器进行了仿真分析与实验验证。实验结果表明,当玻璃位置等参数发生变化时,基于改进跟踪微分器的线性自抗扰控制系统仍能较好地实现对切刀的交互力控制,有效保证切膜效果,证明了提出方法的有效性与实用性。展开更多
In this study, a three-dimensional (3D) in-situ laser machining system integrating laser measurement and machining was built using a 3D galvanometer scanner equipped with a side-axis industrial camera. A line structur...In this study, a three-dimensional (3D) in-situ laser machining system integrating laser measurement and machining was built using a 3D galvanometer scanner equipped with a side-axis industrial camera. A line structured light measurement model based on a galvanometer scanner was proposed to obtain the 3D information of the workpiece. A height calibration method was proposed to further ensure measurement accuracy, so as to achieve accurate laser focusing. In-situ machining software was developed to realize time-saving and labor-saving 3D laser processing. The feasibility and practicability of this in-situ laser machining system were verified using specific cases. In comparison with the conventional line structured light measurement method, the proposed methods do not require light plane calibration, and do not need additional motion axes for 3D reconstruction;thus they provide technical and cost advantages. The insitu laser machining system realizes a simple operation process by integrating measurement and machining,which greatly reduces labor and time costs.展开更多
The paper approaches the problem of the command functions of galvanometer-based scanners （GS） that are necessary to produce the linear plus parabolic scanning function of the GS, which we have proved previously to p...The paper approaches the problem of the command functions of galvanometer-based scanners （GS） that are necessary to produce the linear plus parabolic scanning function of the GS, which we have proved previously to produce the highest possible duty cycle （i.e., time efficiency） of the device. We have completed this theoretical aspect （which contradicted what has been stated previously in the literature, where it has been considered that the linear plus sinusoidal scanning function was the best） with the experimental study of the most used scanning functions of the GSs （sawtooth, sinusoidal and triangular）, with applications in biomedical imaging, in particular in optical coherence tomography, demonstrating that the triangular function is always the best one to be applied, from both an optical and a mechanical point of view. In the present study the input voltage/command function which should be applied to the GS to produce the desired triangular scanning function （with controlled non-linearity for the fastest possible stop-and-turn portions） was determined analytically, in relationship with the active torque that drives the device. This command function is analyzed with regard to the specific, respectively required parameters of the GS： natural frequency and damping factor, respectively scan speed and amplitude. The modeling in an open loop control structure of the GS is finally discussed as a trade-off between using the highest possible duty cycle and minimizing the maximum peaks of the input voltage.展开更多
文摘针对X-Y平台中模型误差和扰动未知等问题,本文以夹胶玻璃自动切膜为应用背景,设计自动切膜恒力控制系统,并对系统中的交互力进行分析与建模。提出了一种改进线性自抗扰(linear active disturbance rejection controller,LADRC)力控制器,将滑模控制嵌入到基于预报的线性跟踪微分器(tracking differentiator,TD)中,平衡滤波与相位滞后间的矛盾,利用分数阶比例微分(fractional order proportion differentiation,FOPD)快速响应跟踪力误差,并通过Lyapunov函数对改进线性跟踪微分器进行稳定性证明。通过与线性自抗扰进行比较,对所设计的控制器进行了仿真分析与实验验证。实验结果表明,当玻璃位置等参数发生变化时,基于改进跟踪微分器的线性自抗扰控制系统仍能较好地实现对切刀的交互力控制,有效保证切膜效果,证明了提出方法的有效性与实用性。
文摘In this study, a three-dimensional (3D) in-situ laser machining system integrating laser measurement and machining was built using a 3D galvanometer scanner equipped with a side-axis industrial camera. A line structured light measurement model based on a galvanometer scanner was proposed to obtain the 3D information of the workpiece. A height calibration method was proposed to further ensure measurement accuracy, so as to achieve accurate laser focusing. In-situ machining software was developed to realize time-saving and labor-saving 3D laser processing. The feasibility and practicability of this in-situ laser machining system were verified using specific cases. In comparison with the conventional line structured light measurement method, the proposed methods do not require light plane calibration, and do not need additional motion axes for 3D reconstruction;thus they provide technical and cost advantages. The insitu laser machining system realizes a simple operation process by integrating measurement and machining,which greatly reduces labor and time costs.
基金the support of the US Department of State through Fulbright Scholar Grant 474/2009
文摘The paper approaches the problem of the command functions of galvanometer-based scanners （GS） that are necessary to produce the linear plus parabolic scanning function of the GS, which we have proved previously to produce the highest possible duty cycle （i.e., time efficiency） of the device. We have completed this theoretical aspect （which contradicted what has been stated previously in the literature, where it has been considered that the linear plus sinusoidal scanning function was the best） with the experimental study of the most used scanning functions of the GSs （sawtooth, sinusoidal and triangular）, with applications in biomedical imaging, in particular in optical coherence tomography, demonstrating that the triangular function is always the best one to be applied, from both an optical and a mechanical point of view. In the present study the input voltage/command function which should be applied to the GS to produce the desired triangular scanning function （with controlled non-linearity for the fastest possible stop-and-turn portions） was determined analytically, in relationship with the active torque that drives the device. This command function is analyzed with regard to the specific, respectively required parameters of the GS： natural frequency and damping factor, respectively scan speed and amplitude. The modeling in an open loop control structure of the GS is finally discussed as a trade-off between using the highest possible duty cycle and minimizing the maximum peaks of the input voltage.
