The forms and structures of the phases in Fe-Ni-Co-Nb-Ti-Si low expansion superal-loys have been studied using analytical electron microscopy, high resolution electron microscopy, chemical phase analysis, X-ray diffra...The forms and structures of the phases in Fe-Ni-Co-Nb-Ti-Si low expansion superal-loys have been studied using analytical electron microscopy, high resolution electron microscopy, chemical phase analysis, X-ray diffraction, etc. The effects of yttrium on the microstructures and properties in the superalloys have also been investigated. The results reveal that trace yttrium mainly located in the platelet precipitates makes the crystal structure changed. The platelet precipitates become smaller, denser and rather homogeneous with appropriate yttrium addition. Compared with the conventional low expansion superalloy, the misfit of the platelet phase with the matrix in the yttrium-containing low expansion superalloy decreases from 0.7% to 0.07%, which indicates very low stress at the interface.展开更多
An Al62.5Cu25Fe12.5 quasi-crystalline alloy was prepared by are melting. X-ray diffraction and scanning electron microscopy were used to study the microstructure of the quasi-crystalline alloy. Isothermal weight gain ...An Al62.5Cu25Fe12.5 quasi-crystalline alloy was prepared by are melting. X-ray diffraction and scanning electron microscopy were used to study the microstructure of the quasi-crystalline alloy. Isothermal weight gain of the Al-Cu-Fe quasi-crystal at elevated temperature in dry air was measured by means of a thermal balance and the oxidation behavior was evaluated by oxidation kinetic curves, from which it was deduced that the quasi-crystal exhibits good oxidation resistance. The surface morphologies of the Al-Cu-Fe quasi-crystal after isothermal oxidation at 700°C and 800°C for different times were observed. The oxidation resistance of quasi-crystalline powder and normal crystalline powder in the Al-Cu-Fe system was also quantitatively compared in quantity.展开更多
Indium oxide(In_2O_3) films were prepared on Al_2O_3(0001) substrates at 700 °C by metal-organic chemical vapor deposition(MOCVD).Then the samples were annealed at 800 °C,900 °C and 1 000 °C,respec...Indium oxide(In_2O_3) films were prepared on Al_2O_3(0001) substrates at 700 °C by metal-organic chemical vapor deposition(MOCVD).Then the samples were annealed at 800 °C,900 °C and 1 000 °C,respectively.The X-ray diffraction(XRD) analysis reveals that the samples were polycrystalline films before and after annealing treatment.Triangle or quadrangle grains can be observed,and the corner angle of the grains becomes smooth after annealing.The highest Hall mobility is obtained for the sample annealed at 900 °C with the value about 24.74 cm^2·V^(-1)·s^(-1).The average transmittance for the films in the visible range is over 90%.The optical band gaps of the samples are about 3.73 e V,3.71 e V,3.70 eV and 3.69 eV corresponding to the In_2O_3 films deposited at 700 °C and annealed at 800 °C,900 °C and 1 000 °C,respectively.展开更多
New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grou...New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grouts were investigated. The addition of MFA effectively improves the pseudo-plasticity of the grout. The Ma cone flow time decreases obviously, and the bleeding rate tends to be zero. The deformation behaviors of fresh mixture and hardened grout are systematically studied. Mercury injection method (MIP), scanning electron microscopy (SEM) and X-ray diffractory analysis experiments are used to analyze the microstructure evolution of the grouts, which manifests that the co-action of the early bubble reaction and the latter ettringite crystallization ensure the volume stability throughout the whole hydration process and result in refined pore structure of the grout.展开更多
A new high spectral resolution crystal spectrometer is designed to measure very low emissive X-ray spectra of laser-produced plasma in 0.5-0.9 nm range. A large open aperture （30 ×20 （mm）） mica （002） spheri...A new high spectral resolution crystal spectrometer is designed to measure very low emissive X-ray spectra of laser-produced plasma in 0.5-0.9 nm range. A large open aperture （30 ×20 （mm）） mica （002） spherically bent crystal with curvature radius R = 380 mm is used as dispersive and focusing element. The imaging plate is employed to obtain high spectral resolution with effective area of 30 × 80 （mm）. The long designed path of the X-ray spectrometer beam is 980 mm from the source to the detector via the crystal. Experiment is carried out at a 20-J laser facility. X-ray spectra in an absolute intensity scale is obtained from Al laserproduced plasmas created by laser energy of 6.78 J. Samples of spectra obtained with spectral resolution of up to E/△E - 1500 are presented. The results clearly show that the device is good to diagnose laser high-density plasmas.展开更多
A Princeton Instruments PI-LCX 1300 charge-coupled device （CCD） camera used for X-ray spectrum measurements in laser-plasma experiments is calibrated using three radioactive sources and investigated with the Monte C...A Princeton Instruments PI-LCX 1300 charge-coupled device （CCD） camera used for X-ray spectrum measurements in laser-plasma experiments is calibrated using three radioactive sources and investigated with the Monte Carlo code Geant4. The exposure level is controlled to make the CCD work in single photon counting mode. A summation algorithm for obtaining accurate X-ray spectra is developed to reconstruct the X-ray spectra, and the results show that the developed algorithm effectively reduces the low-energy tail caused by split pixel events. The obtained CCD energy response shows good linearity. The detection efficiency curves from both Monte Carlo simulations and the manufacturer agree well with the experimental results. This consistency demonstrates that event losses in charge collection processes are negligible when the developed summation algorithm of sDlit Dixel events is emDloved.展开更多
A four-channel Kirkpatrick Baez microscope working at multiple energy bands is developed for multiframe X-ray imaging diagnostics at the Shenguang-II laser facility. The response to the multiple energy bands is realiz...A four-channel Kirkpatrick Baez microscope working at multiple energy bands is developed for multiframe X-ray imaging diagnostics at the Shenguang-II laser facility. The response to the multiple energy bands is realized by coating the double-periodic multilayers on the reflected surfaces of the microscope. Because of the limited size of the microstrips in the X-ray framing camera, the image separation is controlled by the coni- cal angle of the reference cores during microscope assembly. This study describes the optical and multilayer design, assembly, and aligmnent of the developed microscope. The microscope achieves a spatial resolution of 4 5 gin in the laboratory and 10 20 ~tm at Shenguang-II laser facility within a 300 tim field of view. The versatile nature of the developed microscope enables the multiple microscopes currently installed in the laser facility to be replaced with a single, multipurpose microscope.展开更多
A four-channel multilayer Kirkpatrick-Baez （KB） microscope is developed for the 8-keV X-ray imaging of experiments on laser inertial confinement fusion （ICF）. A periodic multilayer that works at 8 keV and with a g...A four-channel multilayer Kirkpatrick-Baez （KB） microscope is developed for the 8-keV X-ray imaging of experiments on laser inertial confinement fusion （ICF）. A periodic multilayer that works at 8 keV and with a grazing incidence angle of 1.0~ is coated on reflective surfaces to achieve a spatial resolution higher than 5μm and an effective solid angle higher than 10-7 sr. A precise assembly is realized by a conical reference cone to couple with an X-ray framing camera. This study provides detailed information on an optical and multilayer design, assembly method, and experimental results with a Cu X-ray tube. The instrument provides a high-resolution and high-throughput X-ray image for backlit or self-emission imaging of laser plasma at Cu Kα line radiation in Shenguang series laser facilities.展开更多
A time-resolved multispectral X-ray imaging approach with new version of multi-channel Kirkpatrick- Baez （KB） microscope is developed for laser plasma diagnostics at the kilo joule-class Shenguang-II laser facility ...A time-resolved multispectral X-ray imaging approach with new version of multi-channel Kirkpatrick- Baez （KB） microscope is developed for laser plasma diagnostics at the kilo joule-class Shenguang-II laser facility （SG-II）. The microscope uses a total external reflection mirror in the sagittal direction and an array of multilayer mirrors in the tangential direction to obtain multiple individual high-resolution, high- throughput, and quasi-monochromatic X-ray images. The time evolution of the imploded target in multiple X-ray energy bands can be acquired when coupled with an X-ray streak camera. The experimental result of the time-resolved 2.5 and 3.0 keV dual-spectral self-emission imaging of the undoped CH shell target on SG-II is given.展开更多
In this paper, a depth-graded C/W multilayer mirror with broad grazing incident angular range, consisting of three multilayer stacks, each of which has different period thickness d and the layer pair number, was desig...In this paper, a depth-graded C/W multilayer mirror with broad grazing incident angular range, consisting of three multilayer stacks, each of which has different period thickness d and the layer pair number, was designed and fabricated by direct current (DC) magnetron sputtering. For calculating the definite performance of such a mirror, the saturation effects of the interfacial imperfection, such as interface roughness and diffusion, were emerged. The reflectivity of the mirror was measured by the X-ray diffraction (XRD) instrument at Cu Kα radiation (λ = 0.154 nm), the measured reflectivity was about 30% in a broad grazing incident angular range (0.55°-0.85°). By the fitting data, the thickness of each layer is almost same as the one designed and the roughness in the multilayer is about 0.85 nm, which is larger than the prospective value of 0.5 nm.展开更多
A series of Mo/Si multilayers with the same periodic length and different periodic number were prepared by magnetron sputtering, whose top layers were respectively Mo layer and Si layer. Periodic length and interface ...A series of Mo/Si multilayers with the same periodic length and different periodic number were prepared by magnetron sputtering, whose top layers were respectively Mo layer and Si layer. Periodic length and interface roughness of Mo/Si multilayers were determined by small angle X-ray diffraction （SAXRD）. Surface roughness change curve of Mo/Si multilayer with increasing layer number was studied by atomic force microscope （AFM）. Soft X-ray reflectivity of Mo/Si multilayers was measured in National Synchrotron Radiation Laboratory （NSRL）. Theoretical and experimental results show that the soft X-ray reflectivity of Mo/Si multilayer is mainly determined by periodic number and interface roughness, surface roughness has little effect on reflectivity.展开更多
Thin film methods and X ray energy dispersive technique were applied to analyze sulfate-containing particles inBeijing in order to examine their features and sources. Atmospheric aerosol particles were collected on el...Thin film methods and X ray energy dispersive technique were applied to analyze sulfate-containing particles inBeijing in order to examine their features and sources. Atmospheric aerosol particles were collected on electron microscope meshes according to two size ranges: coarse particles (r>0.5μm) and fine particles (0.5μm>r>0. 1μm) by using a two-stage impactor. It was found that more than seventy percent of the fine particles and about twenty percentof the coarse particles were sulfate-containing particles. These particles were formed mainly through heterogeneousnucleation. The element composition analyses revealed that the atmospheric aerosol particles in Beijing were domi-nated by crustal particles and construction dust.展开更多
Ultra-short-period W/C multilayers having periodic thickness range of 1.15-3.01 nm have been fabricated for soft X-ray optics using the high vacuum direct current (DC) magnetron sputtering system. These multilayers we...Ultra-short-period W/C multilayers having periodic thickness range of 1.15-3.01 nm have been fabricated for soft X-ray optics using the high vacuum direct current (DC) magnetron sputtering system. These multilayers were characterized by low-angle X-ray diffraction (LAXRD) and transmission electron microscope (TEM). The results show that the multilayer thin films with periodic thickness more than 1.5 nm have clear W-C interface and low roughness. But the structure of the periodic thickness below 1.5 nm is not clear. Finally, three ways to improve the performance of the multilayers are suggested.展开更多
By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain siz...By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain size,phase composition,microstructure and crystallization process.The results show that the nanophase M-type Sr-ferrite prepared by this method is single,and its grain size is smaller than 100 nm.Moreover,most of the grains present hexagonal sheet shape.Tests are carried out for its attenuation to 1.06 mm laser.It is found that the extinction capability of the nanophase M-type Sr-ferrite smoke is good,and its mass extinction coefficient is 1.628 m2/g.展开更多
ZnSe multipod-based structures,including tetrapod-like microrods,long microwires,and short nanorods,are selectively prepared by atmospheric pressure thermal evaporation of ZnSe nanoparticles without using any catalyst...ZnSe multipod-based structures,including tetrapod-like microrods,long microwires,and short nanorods,are selectively prepared by atmospheric pressure thermal evaporation of ZnSe nanoparticles without using any catalyst.The morphologies could be well controlled by simply adjusting the deposition position.The phase structures,morphologies,and optical properties of the products are investigated by X-ray diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(TEM),and photoluminescence(PL) spectroscopy.A vapor-liquid mechanism is proposed for the formation of ZnSe multipod-based structures.The presented route is expected to be applied to the synthesis of other Ⅱ-Ⅵ groups or other group's semiconductor materials with controllable morphologies.展开更多
This paper summarizes the new developments in the study of barium rare-earth fluor-carbonate mineral structures .The second order superstructure of cebaite -(Ce ) was solved by using high power X-ray single crystal di...This paper summarizes the new developments in the study of barium rare-earth fluor-carbonate mineral structures .The second order superstructure of cebaite -(Ce ) was solved by using high power X-ray single crystal diffractometer . Five kinds of coordination forms were found . All atoms in the cell , including C and F , were properly located . In the process of study in a cordylite-(Ce ), a new mineral was discovered , whose chemical formula is (Ca0.5□0.5) BaCe2 (CO3)4F . It is isostructural with baiyuneboite - (Ce ), but different in composition (Na in baiyuneboite- (Ce ) is substituted by Ca disorderly ) . On the basis of the studies a proposal to re-define cordylite-(Ce )as a mineral group name is put forth by the authors . Finally a new type of twinning of huanghoite-(Ce ) was found on the systematical absence of diffraction data by means of a single crystal diffractometer .展开更多
The enduring enigma surrounding the near-infrared(NIR)emission of Mn^(2+)continues to ignite intense academic discussions.Numerous hypotheses have emerged from extensive research endeavors to explain this phenomenon,s...The enduring enigma surrounding the near-infrared(NIR)emission of Mn^(2+)continues to ignite intense academic discussions.Numerous hypotheses have emerged from extensive research endeavors to explain this phenomenon,such as the formation of Mn^(2+)-Mn^(2+)ion pairs,Mn^(2+)occupying cubically coordinated sites,as well as conjectures positing the involvement of Mn3+oxidized from Mn^(2+)or defects.Despite these diverse and valuable insights,none of the hypotheses have yet achieved broad consensus.In this study,we have observed prolonged fluorescence lifetimes(~10ms)for the NIR emissions of Mn^(2+)ions,hinting at these ions occupying the high-symmetry octahedral sites inherent to the garnet lattice.This inference is supported by the corroborating results from X-ray absorption fine structure analysis and first-principles calculations.The intense crystal field of octahedral sites,similar to that of AlO6,facilitates the splitting of d-d energy levels,thereby inducing a red-shift in the emission spectrum to the NIR region due to the transition ^(4)T_(1)(4G)→ ^(6)A_(n)(6S)of isolated Mn^(2+).Our findings not only offer a plausible rationale for the NIR emission exhibited by other Mn^(2+)-activated garnet phosphors but also pave a definitive route towards understanding the fundamental mechanisms responsible for the NIR emission of Mn^(2+)ions.展开更多
Using two-step method InP epilayers were grown on GaAs（100） substrates by low-pressure metalorganic chemical vapor deposition （LP-MOCVD）. X-ray diffraction （XRD） and room-temperature （RT） photolu- minescence ...Using two-step method InP epilayers were grown on GaAs（100） substrates by low-pressure metalorganic chemical vapor deposition （LP-MOCVD）. X-ray diffraction （XRD） and room-temperature （RT） photolu- minescence （PL） were employed to characterize the quality of InP epilayer. The best scheme of growing InP/GaAs（100） heterostructures was obtained by optimizing the initial low-temperature （LT） InP growth conditions, investigating the effects of thermal cycle annealing （TCA） and strained layer superlattice （SLS） on InP epilayers. Compared with annealing, 10-periods Ga0.1In0.9P/InP SLS inserted into InP epilayers can improve the quality of epilayers dramatically, by this means, for 2.6-#m-thick heteroepitaxial InP, the full-widths at half-maximum （FWHMs） of XRD ω and ω-28 scans are 219 and 203 arcsec, respectively, the RT PL spectrum shows the band edge transition of InP, the FWHM is 42 meV. In addition, the successful growth of InP/In0.53Ga0.47As MQWs on GaAs（100） substrates indicates the quality of device demand of InP/GaAs heterostructures.展开更多
基金Chinese foundation of aeronautical science( N o.96 G2 10 0 3)
文摘The forms and structures of the phases in Fe-Ni-Co-Nb-Ti-Si low expansion superal-loys have been studied using analytical electron microscopy, high resolution electron microscopy, chemical phase analysis, X-ray diffraction, etc. The effects of yttrium on the microstructures and properties in the superalloys have also been investigated. The results reveal that trace yttrium mainly located in the platelet precipitates makes the crystal structure changed. The platelet precipitates become smaller, denser and rather homogeneous with appropriate yttrium addition. Compared with the conventional low expansion superalloy, the misfit of the platelet phase with the matrix in the yttrium-containing low expansion superalloy decreases from 0.7% to 0.07%, which indicates very low stress at the interface.
文摘An Al62.5Cu25Fe12.5 quasi-crystalline alloy was prepared by are melting. X-ray diffraction and scanning electron microscopy were used to study the microstructure of the quasi-crystalline alloy. Isothermal weight gain of the Al-Cu-Fe quasi-crystal at elevated temperature in dry air was measured by means of a thermal balance and the oxidation behavior was evaluated by oxidation kinetic curves, from which it was deduced that the quasi-crystal exhibits good oxidation resistance. The surface morphologies of the Al-Cu-Fe quasi-crystal after isothermal oxidation at 700°C and 800°C for different times were observed. The oxidation resistance of quasi-crystalline powder and normal crystalline powder in the Al-Cu-Fe system was also quantitatively compared in quantity.
基金supported by the National Natural Science Foundation of China(Nos.6127411311204212 and 61404091)+5 种基金the Program for New Century Excellent Talents in University(No.NCET-11-1064)the Tianjin Natural Science Foundation(Nos.13JCYBJC1570013JCZDJC2610014JCZDJC31500 and 14JCQNJC00800)the Tianjin Science and Technology Developmental Funds of Universities and Colleges(Nos.2010070320130701 and 20130702)
文摘Indium oxide(In_2O_3) films were prepared on Al_2O_3(0001) substrates at 700 °C by metal-organic chemical vapor deposition(MOCVD).Then the samples were annealed at 800 °C,900 °C and 1 000 °C,respectively.The X-ray diffraction(XRD) analysis reveals that the samples were polycrystalline films before and after annealing treatment.Triangle or quadrangle grains can be observed,and the corner angle of the grains becomes smooth after annealing.The highest Hall mobility is obtained for the sample annealed at 900 °C with the value about 24.74 cm^2·V^(-1)·s^(-1).The average transmittance for the films in the visible range is over 90%.The optical band gaps of the samples are about 3.73 e V,3.71 e V,3.70 eV and 3.69 eV corresponding to the In_2O_3 films deposited at 700 °C and annealed at 800 °C,900 °C and 1 000 °C,respectively.
文摘New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grouts were investigated. The addition of MFA effectively improves the pseudo-plasticity of the grout. The Ma cone flow time decreases obviously, and the bleeding rate tends to be zero. The deformation behaviors of fresh mixture and hardened grout are systematically studied. Mercury injection method (MIP), scanning electron microscopy (SEM) and X-ray diffractory analysis experiments are used to analyze the microstructure evolution of the grouts, which manifests that the co-action of the early bubble reaction and the latter ettringite crystallization ensure the volume stability throughout the whole hydration process and result in refined pore structure of the grout.
基金supported by the National Natural Science Foundation of China under Grant No.10576041
文摘A new high spectral resolution crystal spectrometer is designed to measure very low emissive X-ray spectra of laser-produced plasma in 0.5-0.9 nm range. A large open aperture （30 ×20 （mm）） mica （002） spherically bent crystal with curvature radius R = 380 mm is used as dispersive and focusing element. The imaging plate is employed to obtain high spectral resolution with effective area of 30 × 80 （mm）. The long designed path of the X-ray spectrometer beam is 980 mm from the source to the detector via the crystal. Experiment is carried out at a 20-J laser facility. X-ray spectra in an absolute intensity scale is obtained from Al laserproduced plasmas created by laser energy of 6.78 J. Samples of spectra obtained with spectral resolution of up to E/△E - 1500 are presented. The results clearly show that the device is good to diagnose laser high-density plasmas.
基金supported by the National Natural Science Foundation of China(Nos.10975121,10905051,10902051,and 11174259)the Foundation of CAEP(Nos.2009A0102003 and 2011B0102021)the Foundation of Science and Technology on Plasma Physics Laboratory(No.9140C6802041004)
文摘A Princeton Instruments PI-LCX 1300 charge-coupled device （CCD） camera used for X-ray spectrum measurements in laser-plasma experiments is calibrated using three radioactive sources and investigated with the Monte Carlo code Geant4. The exposure level is controlled to make the CCD work in single photon counting mode. A summation algorithm for obtaining accurate X-ray spectra is developed to reconstruct the X-ray spectra, and the results show that the developed algorithm effectively reduces the low-energy tail caused by split pixel events. The obtained CCD energy response shows good linearity. The detection efficiency curves from both Monte Carlo simulations and the manufacturer agree well with the experimental results. This consistency demonstrates that event losses in charge collection processes are negligible when the developed summation algorithm of sDlit Dixel events is emDloved.
基金supported by the National Natural Science Foundation of China(Nos.11305116 and 11105098)the National Key Technology Support Program of China(No.2013BAK14B02)the National"973"Program of China(No.2011CB922203)
文摘A four-channel Kirkpatrick Baez microscope working at multiple energy bands is developed for multiframe X-ray imaging diagnostics at the Shenguang-II laser facility. The response to the multiple energy bands is realized by coating the double-periodic multilayers on the reflected surfaces of the microscope. Because of the limited size of the microstrips in the X-ray framing camera, the image separation is controlled by the coni- cal angle of the reference cores during microscope assembly. This study describes the optical and multilayer design, assembly, and aligmnent of the developed microscope. The microscope achieves a spatial resolution of 4 5 gin in the laboratory and 10 20 ~tm at Shenguang-II laser facility within a 300 tim field of view. The versatile nature of the developed microscope enables the multiple microscopes currently installed in the laser facility to be replaced with a single, multipurpose microscope.
基金supported by the National"973"Program of China(No.2011CB922203)the National Natural Science Foundation of China(Nos.11105098,11027507,and 11305116)the Scientific Research Plan Projects of the Science and Technology Commission of Shanghai(No.11nm0507200)
文摘A four-channel multilayer Kirkpatrick-Baez （KB） microscope is developed for the 8-keV X-ray imaging of experiments on laser inertial confinement fusion （ICF）. A periodic multilayer that works at 8 keV and with a grazing incidence angle of 1.0~ is coated on reflective surfaces to achieve a spatial resolution higher than 5μm and an effective solid angle higher than 10-7 sr. A precise assembly is realized by a conical reference cone to couple with an X-ray framing camera. This study provides detailed information on an optical and multilayer design, assembly method, and experimental results with a Cu X-ray tube. The instrument provides a high-resolution and high-throughput X-ray image for backlit or self-emission imaging of laser plasma at Cu Kα line radiation in Shenguang series laser facilities.
基金the National Natural Science Foundation of China(Nos.11305116 and 11105098)the National Key Technology Support Program(No.2013BAK14B02)the National"973"Program ofChina(No.2011CB922203)
文摘A time-resolved multispectral X-ray imaging approach with new version of multi-channel Kirkpatrick- Baez （KB） microscope is developed for laser plasma diagnostics at the kilo joule-class Shenguang-II laser facility （SG-II）. The microscope uses a total external reflection mirror in the sagittal direction and an array of multilayer mirrors in the tangential direction to obtain multiple individual high-resolution, high- throughput, and quasi-monochromatic X-ray images. The time evolution of the imploded target in multiple X-ray energy bands can be acquired when coupled with an X-ray streak camera. The experimental result of the time-resolved 2.5 and 3.0 keV dual-spectral self-emission imaging of the undoped CH shell target on SG-II is given.
基金financially supported by the Project of the Science and Technology Creative Team of Universities in Jiangxi Province,China(No.00008713)the Open Foundation of Jiangxi Key Laboratory for Advanced Copper and Tungsten Materials(No.2013-KLP-04)
基金This work was supported by the National Nat- ural Science Foundation of China under Grant No. 60178021.
文摘In this paper, a depth-graded C/W multilayer mirror with broad grazing incident angular range, consisting of three multilayer stacks, each of which has different period thickness d and the layer pair number, was designed and fabricated by direct current (DC) magnetron sputtering. For calculating the definite performance of such a mirror, the saturation effects of the interfacial imperfection, such as interface roughness and diffusion, were emerged. The reflectivity of the mirror was measured by the X-ray diffraction (XRD) instrument at Cu Kα radiation (λ = 0.154 nm), the measured reflectivity was about 30% in a broad grazing incident angular range (0.55°-0.85°). By the fitting data, the thickness of each layer is almost same as the one designed and the roughness in the multilayer is about 0.85 nm, which is larger than the prospective value of 0.5 nm.
文摘A series of Mo/Si multilayers with the same periodic length and different periodic number were prepared by magnetron sputtering, whose top layers were respectively Mo layer and Si layer. Periodic length and interface roughness of Mo/Si multilayers were determined by small angle X-ray diffraction （SAXRD）. Surface roughness change curve of Mo/Si multilayer with increasing layer number was studied by atomic force microscope （AFM）. Soft X-ray reflectivity of Mo/Si multilayers was measured in National Synchrotron Radiation Laboratory （NSRL）. Theoretical and experimental results show that the soft X-ray reflectivity of Mo/Si multilayer is mainly determined by periodic number and interface roughness, surface roughness has little effect on reflectivity.
文摘Thin film methods and X ray energy dispersive technique were applied to analyze sulfate-containing particles inBeijing in order to examine their features and sources. Atmospheric aerosol particles were collected on electron microscope meshes according to two size ranges: coarse particles (r>0.5μm) and fine particles (0.5μm>r>0. 1μm) by using a two-stage impactor. It was found that more than seventy percent of the fine particles and about twenty percentof the coarse particles were sulfate-containing particles. These particles were formed mainly through heterogeneousnucleation. The element composition analyses revealed that the atmospheric aerosol particles in Beijing were domi-nated by crustal particles and construction dust.
基金financially supported by the High-Tech Research and Development Program of China(No.SS2013AA031305)the Key Technologies R&D Program of Tianjin(No.12ZCDGGX49100)
基金This work was supported by the National Natural Sci- ence Foundation of China (No. 10435050, 60378021)by the Nanometer Technology Special Founda- tion of Shanghai Science and Technology Commit- tee (No. 0352nm090).
文摘Ultra-short-period W/C multilayers having periodic thickness range of 1.15-3.01 nm have been fabricated for soft X-ray optics using the high vacuum direct current (DC) magnetron sputtering system. These multilayers were characterized by low-angle X-ray diffraction (LAXRD) and transmission electron microscope (TEM). The results show that the multilayer thin films with periodic thickness more than 1.5 nm have clear W-C interface and low roughness. But the structure of the periodic thickness below 1.5 nm is not clear. Finally, three ways to improve the performance of the multilayers are suggested.
文摘By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain size,phase composition,microstructure and crystallization process.The results show that the nanophase M-type Sr-ferrite prepared by this method is single,and its grain size is smaller than 100 nm.Moreover,most of the grains present hexagonal sheet shape.Tests are carried out for its attenuation to 1.06 mm laser.It is found that the extinction capability of the nanophase M-type Sr-ferrite smoke is good,and its mass extinction coefficient is 1.628 m2/g.
文摘ZnSe multipod-based structures,including tetrapod-like microrods,long microwires,and short nanorods,are selectively prepared by atmospheric pressure thermal evaporation of ZnSe nanoparticles without using any catalyst.The morphologies could be well controlled by simply adjusting the deposition position.The phase structures,morphologies,and optical properties of the products are investigated by X-ray diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(TEM),and photoluminescence(PL) spectroscopy.A vapor-liquid mechanism is proposed for the formation of ZnSe multipod-based structures.The presented route is expected to be applied to the synthesis of other Ⅱ-Ⅵ groups or other group's semiconductor materials with controllable morphologies.
文摘This paper summarizes the new developments in the study of barium rare-earth fluor-carbonate mineral structures .The second order superstructure of cebaite -(Ce ) was solved by using high power X-ray single crystal diffractometer . Five kinds of coordination forms were found . All atoms in the cell , including C and F , were properly located . In the process of study in a cordylite-(Ce ), a new mineral was discovered , whose chemical formula is (Ca0.5□0.5) BaCe2 (CO3)4F . It is isostructural with baiyuneboite - (Ce ), but different in composition (Na in baiyuneboite- (Ce ) is substituted by Ca disorderly ) . On the basis of the studies a proposal to re-define cordylite-(Ce )as a mineral group name is put forth by the authors . Finally a new type of twinning of huanghoite-(Ce ) was found on the systematical absence of diffraction data by means of a single crystal diffractometer .
基金supported by the National Natural Science Foundation of China(Grant No.12104231,12364051,22303031)Innovation Training Program for College Students in Nanjing Forestry University(Grant No.202410298184Y)。
文摘The enduring enigma surrounding the near-infrared(NIR)emission of Mn^(2+)continues to ignite intense academic discussions.Numerous hypotheses have emerged from extensive research endeavors to explain this phenomenon,such as the formation of Mn^(2+)-Mn^(2+)ion pairs,Mn^(2+)occupying cubically coordinated sites,as well as conjectures positing the involvement of Mn3+oxidized from Mn^(2+)or defects.Despite these diverse and valuable insights,none of the hypotheses have yet achieved broad consensus.In this study,we have observed prolonged fluorescence lifetimes(~10ms)for the NIR emissions of Mn^(2+)ions,hinting at these ions occupying the high-symmetry octahedral sites inherent to the garnet lattice.This inference is supported by the corroborating results from X-ray absorption fine structure analysis and first-principles calculations.The intense crystal field of octahedral sites,similar to that of AlO6,facilitates the splitting of d-d energy levels,thereby inducing a red-shift in the emission spectrum to the NIR region due to the transition ^(4)T_(1)(4G)→ ^(6)A_(n)(6S)of isolated Mn^(2+).Our findings not only offer a plausible rationale for the NIR emission exhibited by other Mn^(2+)-activated garnet phosphors but also pave a definitive route towards understanding the fundamental mechanisms responsible for the NIR emission of Mn^(2+)ions.
基金This work was supported by the National Basic Research Program of China(No.2003CB314901)the Program for New Century Excellent Talents in University(No.NCET-05-0111)the National Natural Science Foundation of China(No.60576018).
文摘Using two-step method InP epilayers were grown on GaAs（100） substrates by low-pressure metalorganic chemical vapor deposition （LP-MOCVD）. X-ray diffraction （XRD） and room-temperature （RT） photolu- minescence （PL） were employed to characterize the quality of InP epilayer. The best scheme of growing InP/GaAs（100） heterostructures was obtained by optimizing the initial low-temperature （LT） InP growth conditions, investigating the effects of thermal cycle annealing （TCA） and strained layer superlattice （SLS） on InP epilayers. Compared with annealing, 10-periods Ga0.1In0.9P/InP SLS inserted into InP epilayers can improve the quality of epilayers dramatically, by this means, for 2.6-#m-thick heteroepitaxial InP, the full-widths at half-maximum （FWHMs） of XRD ω and ω-28 scans are 219 and 203 arcsec, respectively, the RT PL spectrum shows the band edge transition of InP, the FWHM is 42 meV. In addition, the successful growth of InP/In0.53Ga0.47As MQWs on GaAs（100） substrates indicates the quality of device demand of InP/GaAs heterostructures.
