This paper presents a microdevice developed to measure the electrical conductivity of a liquid or a saturated porous medium using Wenner method.It is developed in the context of biocementation as soil improvement tech...This paper presents a microdevice developed to measure the electrical conductivity of a liquid or a saturated porous medium using Wenner method.It is developed in the context of biocementation as soil improvement technique,which is used in Civil Engineering applications to produce calcium carbonate through bacterial or enzymatic activity,replacing the use of other binder materials such as cement or resins,and therefore reducing carbon footprint.The microdevice was used to measure urease activity in the soil interstitial fluid,to investigate if bacterial activity could be affected by the presence of the particles and tortuosity from pore geometry.Such analysis is important to understand biocementation mechanism inside the soil and helps to improve the design of such treatment solutions.The device is basically a squared reservoir printed in polypropylene using a 3D printing machine,incorporating stainless steel electrodes in its base.The electrical resistivity was computed adopting Wenner method,by connecting 4 PCB electrodes to a signal generator and an oscilloscope for measuring the voltage when a AC current of 1 mA was applied.Both square and sinusoidal waves with 5 kHz frequency were selected among other frequencies.The measurements were adjusted during the calibration of the microdevice,done using standard salt solutions with known electrical conductivity measured using an electrical conductivity probe.For the bacterial activity measurements,the bacterial and urea solutions were added to a uniform-graded size quarzitic sand(average diameter 0.3 mm)placed inside the microdevice and covering completely the electrodes.Bacterial activity was not affected by the presence of the sand,which confirms that this treatment is effective for this type of soils.展开更多
To estimate the mean value of surface soil water content rapidly,accurately,and nonintrusively,field investigations on soil electrical resistivity(SER)with the Yokogawa 324400 earth resistivity meter and the surface(0...To estimate the mean value of surface soil water content rapidly,accurately,and nonintrusively,field investigations on soil electrical resistivity(SER)with the Yokogawa 324400 earth resistivity meter and the surface(0-150 cm)soil water content(SWC)with time domain reflectometry(TDR),together with the abiotic factors including soil texture,structure. and salinity concentrations were conducted in the Mongolian pine(Pinus sylvestris var.mongolica)plantations on a sandy land.The measurement of SER was based on the 4-probe Wenner configuration method.Relationships between the values of SWC and SER were obtained based on analysis of the abiotic factors of the research site,which play a key role in affecting the soil electrical resistivity.Results indicate that the SER meter could be used to estimate the mean value of SWC in the Mongolian pine plantations on the sandy land during the growing seasons.The bulky nature of the equipment simplified the cumbersome measurements of soil water content with the general methods.It must be noted that the Wenner configuration method could only provide the mean values of the SWC,and the soil texture,structure, temperature,and solute concentrations influenced the SER and further affected the estimation of the SWC by the SER meter.Therefore,the results of this study could be applied on a sandy land during the growing seasons only.However, the SWC of other soil types also may be obtained according to the individual soil types using the procedures of this study.展开更多
This paper presents a study of the soil electrical resistivity of El Roque de los Muchachos Observatory, located in La Palma Island (Spain). This work is mainly motivated by the current plans of building an array of C...This paper presents a study of the soil electrical resistivity of El Roque de los Muchachos Observatory, located in La Palma Island (Spain). This work is mainly motivated by the current plans of building an array of Cherenkov Telescopes (CTA) as well as other scientific installations, which demand low earth resistances for the operation of sensitive instruments, prevention of damage due to electrostatic discharges and protection against lightning strikes. Despite the top quality of the sky, the terrain is mostly filled of hard rocks and materials with high resistivity and hardness. No reliable data of resistivities could be found in available literature, therefore a dedicated resistivity survey onsite like the one presented here is essential to optimize the earth resistance of future installations. In this work, we present measurements done in six different locations of an area covering around 250 m × 275 m and centered on coordinates 28<span style="white-space:nowrap;">˚</span>45'42.9"N, 17<span style="white-space:nowrap;">˚</span>53'28.5"W. Low resistivity (<2 k<span style="white-space:nowrap;">Ω</span>m) layers have been found at specific places and depths. The resistivity at the sites has been simulated with COMSOL Multiphysics software using two different models: a simple single layer model and a three-layer model. Agreement with measurements within 10% discrepancies was obtained in all cases. The main contributions of this work are the presentation of reliable values of soil resistivity at ORM, together with the accurate simulation of the soil profiles.展开更多
基金FCT I.P,for the funding through CALCITE Project(ref.PTDC/ECI-EGC/1086/2021).
文摘This paper presents a microdevice developed to measure the electrical conductivity of a liquid or a saturated porous medium using Wenner method.It is developed in the context of biocementation as soil improvement technique,which is used in Civil Engineering applications to produce calcium carbonate through bacterial or enzymatic activity,replacing the use of other binder materials such as cement or resins,and therefore reducing carbon footprint.The microdevice was used to measure urease activity in the soil interstitial fluid,to investigate if bacterial activity could be affected by the presence of the particles and tortuosity from pore geometry.Such analysis is important to understand biocementation mechanism inside the soil and helps to improve the design of such treatment solutions.The device is basically a squared reservoir printed in polypropylene using a 3D printing machine,incorporating stainless steel electrodes in its base.The electrical resistivity was computed adopting Wenner method,by connecting 4 PCB electrodes to a signal generator and an oscilloscope for measuring the voltage when a AC current of 1 mA was applied.Both square and sinusoidal waves with 5 kHz frequency were selected among other frequencies.The measurements were adjusted during the calibration of the microdevice,done using standard salt solutions with known electrical conductivity measured using an electrical conductivity probe.For the bacterial activity measurements,the bacterial and urea solutions were added to a uniform-graded size quarzitic sand(average diameter 0.3 mm)placed inside the microdevice and covering completely the electrodes.Bacterial activity was not affected by the presence of the sand,which confirms that this treatment is effective for this type of soils.
基金Project supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(No.KZCX3-SW-418)the 100 Talents Program of the Chinese Academy of Sciences,China.
文摘To estimate the mean value of surface soil water content rapidly,accurately,and nonintrusively,field investigations on soil electrical resistivity(SER)with the Yokogawa 324400 earth resistivity meter and the surface(0-150 cm)soil water content(SWC)with time domain reflectometry(TDR),together with the abiotic factors including soil texture,structure. and salinity concentrations were conducted in the Mongolian pine(Pinus sylvestris var.mongolica)plantations on a sandy land.The measurement of SER was based on the 4-probe Wenner configuration method.Relationships between the values of SWC and SER were obtained based on analysis of the abiotic factors of the research site,which play a key role in affecting the soil electrical resistivity.Results indicate that the SER meter could be used to estimate the mean value of SWC in the Mongolian pine plantations on the sandy land during the growing seasons.The bulky nature of the equipment simplified the cumbersome measurements of soil water content with the general methods.It must be noted that the Wenner configuration method could only provide the mean values of the SWC,and the soil texture,structure, temperature,and solute concentrations influenced the SER and further affected the estimation of the SWC by the SER meter.Therefore,the results of this study could be applied on a sandy land during the growing seasons only.However, the SWC of other soil types also may be obtained according to the individual soil types using the procedures of this study.
文摘This paper presents a study of the soil electrical resistivity of El Roque de los Muchachos Observatory, located in La Palma Island (Spain). This work is mainly motivated by the current plans of building an array of Cherenkov Telescopes (CTA) as well as other scientific installations, which demand low earth resistances for the operation of sensitive instruments, prevention of damage due to electrostatic discharges and protection against lightning strikes. Despite the top quality of the sky, the terrain is mostly filled of hard rocks and materials with high resistivity and hardness. No reliable data of resistivities could be found in available literature, therefore a dedicated resistivity survey onsite like the one presented here is essential to optimize the earth resistance of future installations. In this work, we present measurements done in six different locations of an area covering around 250 m × 275 m and centered on coordinates 28<span style="white-space:nowrap;">˚</span>45'42.9"N, 17<span style="white-space:nowrap;">˚</span>53'28.5"W. Low resistivity (<2 k<span style="white-space:nowrap;">Ω</span>m) layers have been found at specific places and depths. The resistivity at the sites has been simulated with COMSOL Multiphysics software using two different models: a simple single layer model and a three-layer model. Agreement with measurements within 10% discrepancies was obtained in all cases. The main contributions of this work are the presentation of reliable values of soil resistivity at ORM, together with the accurate simulation of the soil profiles.
