The present work provides a facile and efficient method for producing ultrafine copper powders.Ultrafine copper powders were synthesized through a solvothermal method,utilizing ethanol both as a solvent and a reducing...The present work provides a facile and efficient method for producing ultrafine copper powders.Ultrafine copper powders were synthesized through a solvothermal method,utilizing ethanol both as a solvent and a reducing agent.Specifically,by exploiting the weak reducing property of ethanol,the copper precursor is first converted to copper oxide and then further reduced to cuprous oxide and pure copper.Such a method can effectively control the morphology and particle size of the copper powder,reduce particle aggregation,and enhance oxidation resistance.It is cost-effective and produces fewer toxic by-products.Spherical copper particles with an average particle size of about 180 nm were obtained.The initial oxidation temperature is approximately 150℃,and the resulting copper powders can be stored stably under ambient conditions for at least 5 months,demonstrating excellent oxidation resistance and thermal stability.展开更多
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
The application and promotion of waste glass powder concrete(WGPC)cansignificantly alleviate the pressure of concrete material scarcity and environmental pollution.Compressive strength(CS)is a critical parameter for e...The application and promotion of waste glass powder concrete(WGPC)cansignificantly alleviate the pressure of concrete material scarcity and environmental pollution.Compressive strength(CS)is a critical parameter for evaluating the efficacy of WGPC.Unlike conventional testing methods,machine learning techniques offer precise and reliable predictions of concrete’s compressive strength,especially in its long-term mechanical properties.In this work,four models,namely Multiple Linear Regression(MLR),Back Propagation Neural Network(BPNN),Support Vector Regression(SVR),and Random Forest Regression(RFR)were employed.Furthermore,particle swarm optimization(PSO)algorithm and cross-validation techniques were applied to fine-tune the model parameters,striving for peak prediction performance.The results indicated that optimized models generally exhibit enhanced predictive accuracy compared to their basic counterparts.Notably,the PSO-RFR model excels among all evaluated models,showcasing superior performance on the testing dataset.It achieves a coefficient of determination(R^(2))of 0.9231,a mean absolute error(MAE)of 2.1073,and a root mean square error(RMSE)of 3.6903.When compared to experimental results,the PSO-RFR and PSO-BPNN models demonstrate exceptional predictive accuracy.Notably,the PSO-BPNN model exhibits the closest R^(2)values between its training and test sets.This close alignment of R^(2)values between the training and testing sets reflects the PSO-BPNN model’s superior generalization ability for unseen data.The findings present an efficient method for predicting concrete’s compressive strength,contributing to the sustainable development of concrete materials,and providing theoretical support for their research and application.展开更多
Adding magnesite flotation concentrate powder in the production of fused magnesia has become an important method for reducing costs and improving the yield.However,the extensive use of concentrate powder also reduces ...Adding magnesite flotation concentrate powder in the production of fused magnesia has become an important method for reducing costs and improving the yield.However,the extensive use of concentrate powder also reduces the quality of fused magnesia raw materials,which is a major cause of the reduced slag corrosion resistance and service life of magnesia-carbon refractories.The effects of concentrate powder additions(0,30%,60%,and 90%,by mass)on the chemical composition,phase composition,microstructure,bulk density,and apparent porosity of the produced 97-grade fused magnesia were investigated.The results show that as the concentrate powder addition increases,the bulk density first increases and then decreases,while the apparent porosity first decreases and then increases.The crystal size of the fused magnesia increases,and the pores at the grain boundaries become larger.The CaO/SiO_(2)molar ratio(C/S ratio)in the fused magnesia increases from 1.17 to 4.17.The bonding phases between the fused magnesia grains change from low-melting-point phases such as CMS(CaMgSiO_(4))and C_(3)MS_(2)(3CaO·MgO·2SiO_(2))to high-melting-point phases like C_(2)S(2CaO·SiO_(2)),C_(3)S(3CaO·SiO_(2)),and CaO,which is beneficial for improving the high-temperature performance of the fused magnesia.However,during production,the volume effects resulting from the polymorphic transformation of dicalcium silicate(C_(2)S)and the low-temperature decomposition of tricalcium silicate(C_(3)S)create significant voids around the fused magnesia grains.These voids can provide pathways for slag corrosion in subsequent magnesia-carbon products,which is likely the primary reason for the decline in the slag corrosion resistance and service life of carbon-containing refractories made from this type of fused magnesia.展开更多
High-moisture meat analogues(HMMAs)offer sustainable protein alternatives to conventional meat and become a research hotspot in recent years.This study systematically investigated the impact of nori powder(NP)incorpor...High-moisture meat analogues(HMMAs)offer sustainable protein alternatives to conventional meat and become a research hotspot in recent years.This study systematically investigated the impact of nori powder(NP)incorporation(0.5%–2.0%)on the physicochemical and structural properties of HMMAs.Rheological analysis revealed that NP reduced the viscosity(consistency coefficient K decreased from 65.67 Pa⋅s to 16.66–19.99 Pa⋅s)and enhanced the fluidity(flow behavior index n increased from 0.25 to 0.33–0.38)of raw material.NP addition progressively decreased the redness values(a*),except for 0.5%NP level.At 1.0%NP level,HMMAs exhibited a denser microstructure with reduced water mobility,resulting in the lowest water holding capacity(2.07 g/g).Conversely,2.0%NP promoted highly oriented fibrous structures,achieving a maximal texturization degree of 1.51.Secondary structure analysis indicated NP facilitated a shift fromα-helix toβ-sheet conformations(β-sheet content increased from 26.06%to 29.92%at 2.0%NP),resulting in stabilized protein networks.These modifications were attributed to NP-induced hydrophobic interactions and polysaccharide-protein crosslinking.The study demonstrates NP's role in modulating HMMA texture and nutrition,providing critical insights for developing fiber-enhanced,nutrient-fortified HMMAs.展开更多
Received:06 December 2025;Accepted:25 February 2026;Published:30 March 2026 ABSTRACT:In the last decade,the importance of sustainable construction and artificial intelligence(AI)in civil engineering has been underline...Received:06 December 2025;Accepted:25 February 2026;Published:30 March 2026 ABSTRACT:In the last decade,the importance of sustainable construction and artificial intelligence(AI)in civil engineering has been underlined in many studies.Numerous studies highlighted the superiority of AI techniques over simple and mathematical regression analyses,which suffer from relatively poor generalization and an inability to capture highly non-linear relationships among inputs and output(s)parameters.In this study,to evaluate the compressive strength of concrete with glass powder(GP)and recycled aggregates,600 concrete samples were tested in the laboratory,and their results were evaluated.For intelligent assessment of concrete compressive strength(CCS),the study utilized an improved artificial neural network(ANN)with particle swarm optimization(PSO)algorithm and imperialist competitive algorithm(ICA).For training the models,the experimentally obtained data were used.The concrete ingredients formed the inputs of the AI-based predictive models of CCS.The experimental findings reveal that the implementation of recycled coarse aggregates in concrete from a sustainable construction point of view is advantageous and can enhance the CCS by 11.43%.Apart from that,findings indicate that utilization of 10%GP can lead to a nearly 20%increase in CCS(from 44.6 to 54.1 MPa).Additionally,the experimental observations show almost 40%improvement of CCS when 5%micro silica was used in the concrete mixture.Based on the findings,the study suggests the utilization of waste glass powder to partially replace cement in concrete,which can reduce the amount of cement production.This reduction from economic,energy-saving,and environmental(reduction in greenhouse gas emissions)points of view is of interest.On the other hand,the AI results show that the PSO-based ANN model outperforms the ICA-based ANN for the utilized dataset.According to the findings,the PSO-based ANN predictive model(with a coefficient of determination value of 0.939 and root mean square value of 0.113 for testing data)is a capable tool in predicting the CCS.Hence,this study recommends the implementation of AI-based models in CCS assessment.展开更多
The electromagnetic wave absorption of silicon carbide nanowires is improved by their uniform and diverse cross-structures.This study introduces a sustainable and high value-added method for synthesizing silicon carbi...The electromagnetic wave absorption of silicon carbide nanowires is improved by their uniform and diverse cross-structures.This study introduces a sustainable and high value-added method for synthesizing silicon carbide nanowires using lignite and waste silicon powder as raw materials through carbothermal reduction.The staggered structure of nanowires promotes the creation of interfacial polarization,impedance matching,and multiple loss mechanisms,leading to enhanced electromagnetic absorption performance.The silicon carbide nanowires demonstrate outstanding electromagnetic absorption capabilities with the minimum reflection loss of-48.09 d B at10.08 GHz and an effective absorption bandwidth(the reflection loss less than-10 d B)ranging from 8.54 to 16.68 GHz with a thickness of 2.17 mm.This research presents an innovative approach for utilizing solid waste in an environmentally friendly manner to produce broadband silicon carbide composite absorbers.展开更多
Zn's natural degradability and biocompatibility make it a promising candidate for implants,however,its mechanical properties remain insufficient for bone applications.In this study,the performance of Zn was enhanc...Zn's natural degradability and biocompatibility make it a promising candidate for implants,however,its mechanical properties remain insufficient for bone applications.In this study,the performance of Zn was enhanced by developing Zn-Cu alloys via laser powder bed fusion(LPBF).Optimal LPBF parameters for forming stable tracks were achieved by adjusting laser power and scanning speed.Under optimized conditions of 100 W and 100 mm/s,high density(99.58%)Zn-Cu alloys with improved hardness(68.2 HV)and yield strength(160 MPa)were achieved.These improvements are attributed to solid solution strengthening,segregation strengthening,and grain refinement.The Zn-Cu alloys also demonstrated favorable degradation behavior,with a rate of 0.16 mm/year.This degradation is primarily driven by micro-galvanic corrosion between the CuZn 5 phase and Zn matrix,along with refined grains and increased grain boundary density.This work demonstrates a viable strategy for fabricating Zn-based implants with enhanced structural integrity and mechanical performance via LPBF.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
As the primary functional component of a fusion reactor,the fusion blanket pebble bed,composed of numerous particles,is crucial for tritium breeding,neutron multiplication,and radiation shielding.Particles within trit...As the primary functional component of a fusion reactor,the fusion blanket pebble bed,composed of numerous particles,is crucial for tritium breeding,neutron multiplication,and radiation shielding.Particles within tritium-breeding pebble beds are subjected to prolonged neutron irradiation,high thermal loads,and strong magnetic fields in fusion environments.Such conditions render them susceptible to pulverization and fragmentation.The resulting fragments and powders migrate and are deposited into the gas channel,driven by the purge gas.The reduction in the effective flow area of the gas increases the flow resistance,resulting in tritium retention,degraded heat transfer,and other adverse effects.These conditions impair the thermodynamic properties of the pebble beds and hinder the self-maintenance of tritium.Limited information exists on powder migration and clogging mechanisms in fusion blanket pebble beds,particularly under diverse physical conditions.The aim of this study was to use a computational fluid dynamics model coupled with the discrete element method(CFD-DEM)to numerically explore powder migration and clogging in pebble beds.The model considers factors such as breeder orientation,purge velocity,powder size distribution,and friction coefficient.We propose two migration and clogging mechanisms.One involves powder with a large particle size,and the other does not.The results indicate that the powder migration velocity progresses through three stages:rapid decay,linear decay,and stability.Pebble-bed clogging manifests in two forms:extensive superficial clogging and uniform internal clogging.Two fitted curves were used to depict the migration and clogging tendencies.The powder size distribution significantly influenced the powder migration.The breeder orientation,powder size,and friction coefficient affected the distribution of the clogging powders.However,the impact of the purge velocity on powder migration and clogging in pebble beds was limited,and this effect varied significantly with different particle size ratios.Based on the analysis,a formula is proposed to characterize the behavior of the powder in the pebble beds.The results of this study can aid in analyzing and predicting powder dynamics in pebble beds.展开更多
A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysi...A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysis of typical slag rims for two highly crystalline powders revealed that their formation was primarily driven by the solidification of the liquid slag.Distinct differences were observed in the microstructures of slag rims from the two powders.Powder A(characterized by a higher breaking temperature and viscosity)displayed alternating lamellar microstructures of coarse and fine phases,with the coarse phases composed of akermanite-gehlenite transition phases.In contrast,powder B(with a lower breaking temperature and viscosity)predominantly comprised regular akermanite-gehlenite crystals interspersed with a certain amount of glassy phases.Numerical simulations of a three-phase fluid flow coupled with heat transfer indicate that slag rim formation correlates with mold oscillation.Solidification of the liquid slag at the slag rim front predominantly occurs during the negative stroke of the mold oscillation.The average heating rate during the ascending stage of the mold reaches approximately 100 K·s^(−1),whereas the average cooling rate during the descending stage attains 400 K·s^(−1).This temperature variation leads to the formation of lamellar microstructures,whereas the ascending stage promotes the formation of coarse structures and thicker slag rims.Based on the powder properties,two distinct formation pathways exist for highly crystalline mold powders.For the powders with a higher breaking temperature,higher viscosity,and narrower solidification range(powder A),coarse microstructures and thicker slag rims were preferentially formed.For powders with lower breaking temperature and viscosity and wider solidification ranges(powder B),the liquid slag resisted rapid solidification,and the extended mushy zone allowed the partial liquid slag to persist at the slag rim front,promoting the formation of a thin slag rim.This study enhances the understanding of slag rim formation in highly crystalline mold powders and provides critical insights into the control of longitudinal surface cracks in hypo-peritectic steel.展开更多
The leaching mechanism of gallium(Ga)and germanium(Ge)from zinc powder replacement residue(ZPRR)was investigated through ultrasonic-assisted sulfuric acid leaching.Characterization via XRD,SEM,XPS,and FT-IR revealed t...The leaching mechanism of gallium(Ga)and germanium(Ge)from zinc powder replacement residue(ZPRR)was investigated through ultrasonic-assisted sulfuric acid leaching.Characterization via XRD,SEM,XPS,and FT-IR revealed that ultrasonic treatment promotes the dehydration of H_(4)SiO_(4)colloids,thereby reducing their adsorption capacities for Ga and Ge complexes.Additionally,ultrasound enhances the dissolution of CaS in H_(2)SO_(4),increasing H_(2)S production,which aids in the reduction of Fe^(3+)and mitigates iron precipitate formation.Process parameters including ultrasonic power(0-450 W),temperature(100-120℃),and leaching time(30-120 min)were systematically optimized,achieving optimal leaching efficiencies of Ga and Ge at 95.7%and 94.5%,respectively.展开更多
The ultrasonic energy field(UEF)-induced grain refinement mechanisms in laser powder direct energy deposition-manufactured Ti5321G alloys were systematically investigated in this study.This study focused on the interp...The ultrasonic energy field(UEF)-induced grain refinement mechanisms in laser powder direct energy deposition-manufactured Ti5321G alloys were systematically investigated in this study.This study focused on the interplay between recrystallization in the high-temperature solid deposition layers and the ultrasonic cavitation-acoustic streaming effects during molten pool solidification.A novel experimental design was developed to decouple these mechanisms by creating four distinct UEF action zones(without UEF-N,withUEF-S,with UEF-L,and with UEF-S+L)within a single-pass multilayer sample.This approach enabled the dual effects of UEF(recrystallization in solidified layers and ultrasonic cavitation-acoustic streaming effects in liquid pools)to be directly compared.The UEF significantly refined the microstructures,reducing the average grain size by 64.2%(from(399.6±28.6)to(143.1±16.1)μm)in the with UEF-S+L zone,while promoting columnar-to-equiaxed transition,with the equiaxed grain probability increasing from 11.1%(without UEF) to 53.8%.The texture intensity was reduced by approximately 52.4%and the mechanical properties were enhanced,achieving a 6.2% increase in yield strength((702.0±10.6)MPa)and 31.7%improvement in elongation.Crucially,this study revealed the synergistic effect of the dual-action mechanisms of UEF,where recrystallization and cavitation-acoustic streaming collectively enabled non-linear grain refinement.This study provides a strategy for microstructural control in additive manufacturing,eliminating the need for complex post-processing and thereby advancing the industrial application of high-performance titanium components.展开更多
The densification characterization,phase constitution,precipitation evolution and mechanical performance of Al−Mg−Sc−Zr alloy processed by laser powder bed fusion(LPBF)were systematically investigated.Moreover,the evo...The densification characterization,phase constitution,precipitation evolution and mechanical performance of Al−Mg−Sc−Zr alloy processed by laser powder bed fusion(LPBF)were systematically investigated.Moreover,the evolution of phase constitution and precipitation behavior after heat treatment were characterized by using X-ray diffraction(XRD)and transmission electron microscope(TEM)analysis.The ultimate tensile strength(UTS)of as-built samples ranged from 396.8 to 414.6 MPa as the scanning speed decreased from 1600 to 1000 mm/s.After post heat treatment,the yield strength(YS)increased to(513.1±1.3)MPa,while the UTS increased from(414.6±5.1)to(539.2±1.5)MPa.The significant improvement of mechanical performance was ascribed to the formation of secondary Al3(Sc,Zr)precipitates.展开更多
Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back ...Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back scattering diffraction(EBSD)observations showed that the grains in melted zone(MZ)transformed into equiaxial grains with an average size of 1.31μm,and the grains in heat affected zone(HAZ)were refined.Moreover,the texture intensity dropped significantly from 13.86 to 6.35 in MZ and 10.79 in HAZ.The temperature gradient(G)to solidification rate(R)ratio decreased when the laser scanning speed slowed down to a certain extent in the LR process,which effectively improved the highly preferred orientation and filled the hole defects in the surface of LPBF-Ti6Al4V.Furthermore,the hardness,wear resistance and corrosion resistance of the surface of the LPBF samples were improved by LR treatment.展开更多
We read with great interest the study by Zhang et al on Yiyi Fuzi Baijiang powder(YFB),which exemplifies the power of modern methods to validate traditional Chinese medicine(TCM).The key insight is that YFB doesn’t m...We read with great interest the study by Zhang et al on Yiyi Fuzi Baijiang powder(YFB),which exemplifies the power of modern methods to validate traditional Chinese medicine(TCM).The key insight is that YFB doesn’t merely alter“good”or“bad”bacteria but restores the gut microbiota’s holistic equilibrium.This is powerfully shown by its paradoxical reduction of anaerobic probiotics like Bifidobacterium,rectifying the diseased,hypoxic environment,causing their aberrant overgrowth.This challenges the conventional probiotic paradigm and underscores a core TCM principle:Herbal formulas treat disease by restoring the body’s overall functional balance.Future research should focus on the interplay between herbal components,intestinal oxygen,and microbial metabolites to further unravel this sophisticated dialogue.展开更多
To enhance the mechanical properties of Mo alloys prepared through laser powder bed fusion(LPBF),a hot isostatic pressing(HIP)treatment was used.Results show that following HIP treatment,the porosity decreases from 0....To enhance the mechanical properties of Mo alloys prepared through laser powder bed fusion(LPBF),a hot isostatic pressing(HIP)treatment was used.Results show that following HIP treatment,the porosity decreases from 0.27%to 0.22%,enabling the elements Mo and Ti to diffuse fully and to distribute more uniformly,and to forming a substantial number of low-angle grain boundaries.The tensile strength soars from 286±32 MPa to 598±22 MPa,while the elongation increases from 0.08%±0.02%to 0.18%±0.02%,without notable alterations in grain morphology during the tensile deformation.HIP treatment eliminates the molten pool boundaries,which are the primary source for premature failure in LPBFed Mo alloys.Consequently,HIP treatment emerges as a novel and effective approach for strengthening the mechanical properties of LPBFed Mo alloys,offering a fresh perspective on producing high-performance Mo-based alloys.展开更多
A comparative study on the performance of gas atomized(GA)and rotating-disk atomized(RDA)aluminum alloy powders produced on industrial scale for laser directed energy deposition(L-DED)process was carried out.The powde...A comparative study on the performance of gas atomized(GA)and rotating-disk atomized(RDA)aluminum alloy powders produced on industrial scale for laser directed energy deposition(L-DED)process was carried out.The powder characteristics,the printing process window,and the quality,microstructure,and mechanical properties of printed parts were taken into account for comparison and discussion.The results demonstrate that the RDA powder is superior to the GA powder in terms of sphericity,surface quality,internal defects,flowability,and apparent density,together with a larger printing process window during the L-DED parts fabrication.Besides,the resultant parts from the RDA powder have higher dimensional accuracy,lower internal defects,more uniform and finer microstructure,and more favorable mechanical properties than those from the GA powder.展开更多
Laser additively manufactured(LAM)Ni-based superalloys commonly exhibit low strength and high residual stress in the as-built state,requiring post-heat treatment to improve mechanical properties.We propose a modified ...Laser additively manufactured(LAM)Ni-based superalloys commonly exhibit low strength and high residual stress in the as-built state,requiring post-heat treatment to improve mechanical properties.We propose a modified heat treatment(MHT)process that only involves a single-step aging at 650℃ for 4 h to achieve high strength,high ductility,and low residual stress simultaneously in a laser powder bed fusion(LPBF)-processed Inconel 718(IN718)alloy.The MHT treated alloy exhibits comparable tensile strength(1368 MPa)to the conventional solution plus two-step aging(SA)treated alloy(1398 MPa),while the tensile elongation(∼21.7%for MHT treated alloy and 13.4%for SA treated alloy)is 60%higher and the residual stress(∼195 MPa)is 20%lower than the SA treated alloy.The balanced high performance of the MHT IN718 alloy was mainly attributed to the precipitation of abundantγ’’phase with a size of∼5 nm,while the original nano-sized Laves precipitates and dislocation cells were mostly retained.The finer size and higher fraction ofγ”of the MHT sample mainly result from the dislocation structure and compositional variations in the as-built IN718,which promotes precipitation during aging.The retention of Laves phase,and cellular dislocation network in the MHT alloy also contributes to work hardening during tension and suspends the occurrence of necking.This study unveils a unique strengthening and toughening mechanism in the Ni-based superalloy produced by LAM with the presence of abundant Laves precipitates and provides a simple,low energy-consumption and cost-effective heat treatment route for achieving desirable mechanical properties.展开更多
BACKGROUND Ulcerative colitis(UC)is a chronic inflammatory disease affecting the colon.The most common psychological issue in UC patients is varying degrees of depre-ssion,which affects the condition and quality of li...BACKGROUND Ulcerative colitis(UC)is a chronic inflammatory disease affecting the colon.The most common psychological issue in UC patients is varying degrees of depre-ssion,which affects the condition and quality of life of UC patients and may lead to deterioration of the patient’s condition.UC drugs combined with anti-anxiety and antidepression drugs can alleviate symptoms of both depression and UC.Brain-derived neurotrophic factor(BDNF)precursor(proBDNF)/p75 neurotrophin receptor(p75NTR)/sortilin and BDNF/tropomyosin receptor kinase B(TrkB)signalling balance is essential for maintaining brain homeostasis and preventing the development of depressive behaviours.AIM To explore the mechanism by which Wuling powder regulates the proBDNF/p75NTR/sortilin and BDNF/TrkB pathways in the treatment of UC with depre-ssion.METHODS Depression was established in C57BL/6J mice via chronic restraint stress,and the UC model was induced with dextran sodium sulfate(DSS).In the treatment stage,mesalazine(MS)was the basic treatment,Wuling powder was the experimental treatment,and fluoxetine was the positive control drug for treating depression.Changes in intestinal mucosal inflammation,behaviour,and the proBDNFp75NTR/sortilin and BDNF/TrkB pathways were evaluated.RESULTS In the depression groups,Wuling powder decreased the immobility time,increased the distance travelled in the central zone and the total distance travelled,and restored balance in the proBDNF/p75NTR/sortilin and BDNF/TrkB signalling pathways.In the DSS and chronic restraint stress+DSS groups,immobility time increased,distance travelled in the central zone and total distance travelled decreased,activity of the proBDNF/p75NTR/sortilin pathway was upregulated,and activity of the BDNF/TrkB pathway was downregulated,indicating that mice with UC often have comorbid depression.Compared with those of MS alone,Wuling powder combined with MS further decreased the colon histopathological scores and the expression levels of tumor necrosis factor-alpha and interleukin-6 mRNAs.CONCLUSION This study confirmed that Wuling powder may play an antidepressant role by regulating the balance of the proBDNF/p75NTR/sortilin and BDNF/TrkB signalling pathways and further relieve intestinal inflammation in UC.展开更多
文摘The present work provides a facile and efficient method for producing ultrafine copper powders.Ultrafine copper powders were synthesized through a solvothermal method,utilizing ethanol both as a solvent and a reducing agent.Specifically,by exploiting the weak reducing property of ethanol,the copper precursor is first converted to copper oxide and then further reduced to cuprous oxide and pure copper.Such a method can effectively control the morphology and particle size of the copper powder,reduce particle aggregation,and enhance oxidation resistance.It is cost-effective and produces fewer toxic by-products.Spherical copper particles with an average particle size of about 180 nm were obtained.The initial oxidation temperature is approximately 150℃,and the resulting copper powders can be stored stably under ambient conditions for at least 5 months,demonstrating excellent oxidation resistance and thermal stability.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
文摘The application and promotion of waste glass powder concrete(WGPC)cansignificantly alleviate the pressure of concrete material scarcity and environmental pollution.Compressive strength(CS)is a critical parameter for evaluating the efficacy of WGPC.Unlike conventional testing methods,machine learning techniques offer precise and reliable predictions of concrete’s compressive strength,especially in its long-term mechanical properties.In this work,four models,namely Multiple Linear Regression(MLR),Back Propagation Neural Network(BPNN),Support Vector Regression(SVR),and Random Forest Regression(RFR)were employed.Furthermore,particle swarm optimization(PSO)algorithm and cross-validation techniques were applied to fine-tune the model parameters,striving for peak prediction performance.The results indicated that optimized models generally exhibit enhanced predictive accuracy compared to their basic counterparts.Notably,the PSO-RFR model excels among all evaluated models,showcasing superior performance on the testing dataset.It achieves a coefficient of determination(R^(2))of 0.9231,a mean absolute error(MAE)of 2.1073,and a root mean square error(RMSE)of 3.6903.When compared to experimental results,the PSO-RFR and PSO-BPNN models demonstrate exceptional predictive accuracy.Notably,the PSO-BPNN model exhibits the closest R^(2)values between its training and test sets.This close alignment of R^(2)values between the training and testing sets reflects the PSO-BPNN model’s superior generalization ability for unseen data.The findings present an efficient method for predicting concrete’s compressive strength,contributing to the sustainable development of concrete materials,and providing theoretical support for their research and application.
基金support from the National Natural Science Foundation of China(U20A20239 and U1908227).
文摘Adding magnesite flotation concentrate powder in the production of fused magnesia has become an important method for reducing costs and improving the yield.However,the extensive use of concentrate powder also reduces the quality of fused magnesia raw materials,which is a major cause of the reduced slag corrosion resistance and service life of magnesia-carbon refractories.The effects of concentrate powder additions(0,30%,60%,and 90%,by mass)on the chemical composition,phase composition,microstructure,bulk density,and apparent porosity of the produced 97-grade fused magnesia were investigated.The results show that as the concentrate powder addition increases,the bulk density first increases and then decreases,while the apparent porosity first decreases and then increases.The crystal size of the fused magnesia increases,and the pores at the grain boundaries become larger.The CaO/SiO_(2)molar ratio(C/S ratio)in the fused magnesia increases from 1.17 to 4.17.The bonding phases between the fused magnesia grains change from low-melting-point phases such as CMS(CaMgSiO_(4))and C_(3)MS_(2)(3CaO·MgO·2SiO_(2))to high-melting-point phases like C_(2)S(2CaO·SiO_(2)),C_(3)S(3CaO·SiO_(2)),and CaO,which is beneficial for improving the high-temperature performance of the fused magnesia.However,during production,the volume effects resulting from the polymorphic transformation of dicalcium silicate(C_(2)S)and the low-temperature decomposition of tricalcium silicate(C_(3)S)create significant voids around the fused magnesia grains.These voids can provide pathways for slag corrosion in subsequent magnesia-carbon products,which is likely the primary reason for the decline in the slag corrosion resistance and service life of carbon-containing refractories made from this type of fused magnesia.
基金funded by The Science Foundation of Henan University of Technology(2021BS038)The Open Project Program of National Engineering Re-search Center of Wheat and Corn Further Processing(NL2022014)Henan Province Science and Technology R&D Program Joint Fund(Application Research and De-velopment Category)(242103810082).
文摘High-moisture meat analogues(HMMAs)offer sustainable protein alternatives to conventional meat and become a research hotspot in recent years.This study systematically investigated the impact of nori powder(NP)incorporation(0.5%–2.0%)on the physicochemical and structural properties of HMMAs.Rheological analysis revealed that NP reduced the viscosity(consistency coefficient K decreased from 65.67 Pa⋅s to 16.66–19.99 Pa⋅s)and enhanced the fluidity(flow behavior index n increased from 0.25 to 0.33–0.38)of raw material.NP addition progressively decreased the redness values(a*),except for 0.5%NP level.At 1.0%NP level,HMMAs exhibited a denser microstructure with reduced water mobility,resulting in the lowest water holding capacity(2.07 g/g).Conversely,2.0%NP promoted highly oriented fibrous structures,achieving a maximal texturization degree of 1.51.Secondary structure analysis indicated NP facilitated a shift fromα-helix toβ-sheet conformations(β-sheet content increased from 26.06%to 29.92%at 2.0%NP),resulting in stabilized protein networks.These modifications were attributed to NP-induced hydrophobic interactions and polysaccharide-protein crosslinking.The study demonstrates NP's role in modulating HMMA texture and nutrition,providing critical insights for developing fiber-enhanced,nutrient-fortified HMMAs.
文摘Received:06 December 2025;Accepted:25 February 2026;Published:30 March 2026 ABSTRACT:In the last decade,the importance of sustainable construction and artificial intelligence(AI)in civil engineering has been underlined in many studies.Numerous studies highlighted the superiority of AI techniques over simple and mathematical regression analyses,which suffer from relatively poor generalization and an inability to capture highly non-linear relationships among inputs and output(s)parameters.In this study,to evaluate the compressive strength of concrete with glass powder(GP)and recycled aggregates,600 concrete samples were tested in the laboratory,and their results were evaluated.For intelligent assessment of concrete compressive strength(CCS),the study utilized an improved artificial neural network(ANN)with particle swarm optimization(PSO)algorithm and imperialist competitive algorithm(ICA).For training the models,the experimentally obtained data were used.The concrete ingredients formed the inputs of the AI-based predictive models of CCS.The experimental findings reveal that the implementation of recycled coarse aggregates in concrete from a sustainable construction point of view is advantageous and can enhance the CCS by 11.43%.Apart from that,findings indicate that utilization of 10%GP can lead to a nearly 20%increase in CCS(from 44.6 to 54.1 MPa).Additionally,the experimental observations show almost 40%improvement of CCS when 5%micro silica was used in the concrete mixture.Based on the findings,the study suggests the utilization of waste glass powder to partially replace cement in concrete,which can reduce the amount of cement production.This reduction from economic,energy-saving,and environmental(reduction in greenhouse gas emissions)points of view is of interest.On the other hand,the AI results show that the PSO-based ANN model outperforms the ICA-based ANN for the utilized dataset.According to the findings,the PSO-based ANN predictive model(with a coefficient of determination value of 0.939 and root mean square value of 0.113 for testing data)is a capable tool in predicting the CCS.Hence,this study recommends the implementation of AI-based models in CCS assessment.
基金supported by the National Natural Science Foundation of China(No.52436008)the Inner Mongolia Science and Technology Projects,China(Nos.JMRHZX20210003 and 2023YFCY0009)+3 种基金the Huaneng Group Co Ltd.,China(No.HNKJ23-H50)the National Natural Science Foundation of China(No.22408044)the China Postdoctoral Science Foundation(No.2024M761877)the National Key R&D Program of China(No.SQ2024YFD2200039)。
文摘The electromagnetic wave absorption of silicon carbide nanowires is improved by their uniform and diverse cross-structures.This study introduces a sustainable and high value-added method for synthesizing silicon carbide nanowires using lignite and waste silicon powder as raw materials through carbothermal reduction.The staggered structure of nanowires promotes the creation of interfacial polarization,impedance matching,and multiple loss mechanisms,leading to enhanced electromagnetic absorption performance.The silicon carbide nanowires demonstrate outstanding electromagnetic absorption capabilities with the minimum reflection loss of-48.09 d B at10.08 GHz and an effective absorption bandwidth(the reflection loss less than-10 d B)ranging from 8.54 to 16.68 GHz with a thickness of 2.17 mm.This research presents an innovative approach for utilizing solid waste in an environmentally friendly manner to produce broadband silicon carbide composite absorbers.
基金Projects(52571276,52275395,U24A20120,52475362)supported by the National Natural Science Foundation of ChinaProject(2025JJ30015)supported by the Hunan Provincial Natural Science Foundation,China+3 种基金Project(2023RC3046)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2023YFB4605800)supported by National Key Research and Development Program of ChinaProject(2023CXQD023)supported by the Central South University Innovation-Driven Research Programme,ChinaProject supported by the State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University,China。
文摘Zn's natural degradability and biocompatibility make it a promising candidate for implants,however,its mechanical properties remain insufficient for bone applications.In this study,the performance of Zn was enhanced by developing Zn-Cu alloys via laser powder bed fusion(LPBF).Optimal LPBF parameters for forming stable tracks were achieved by adjusting laser power and scanning speed.Under optimized conditions of 100 W and 100 mm/s,high density(99.58%)Zn-Cu alloys with improved hardness(68.2 HV)and yield strength(160 MPa)were achieved.These improvements are attributed to solid solution strengthening,segregation strengthening,and grain refinement.The Zn-Cu alloys also demonstrated favorable degradation behavior,with a rate of 0.16 mm/year.This degradation is primarily driven by micro-galvanic corrosion between the CuZn 5 phase and Zn matrix,along with refined grains and increased grain boundary density.This work demonstrates a viable strategy for fabricating Zn-based implants with enhanced structural integrity and mechanical performance via LPBF.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
文摘As the primary functional component of a fusion reactor,the fusion blanket pebble bed,composed of numerous particles,is crucial for tritium breeding,neutron multiplication,and radiation shielding.Particles within tritium-breeding pebble beds are subjected to prolonged neutron irradiation,high thermal loads,and strong magnetic fields in fusion environments.Such conditions render them susceptible to pulverization and fragmentation.The resulting fragments and powders migrate and are deposited into the gas channel,driven by the purge gas.The reduction in the effective flow area of the gas increases the flow resistance,resulting in tritium retention,degraded heat transfer,and other adverse effects.These conditions impair the thermodynamic properties of the pebble beds and hinder the self-maintenance of tritium.Limited information exists on powder migration and clogging mechanisms in fusion blanket pebble beds,particularly under diverse physical conditions.The aim of this study was to use a computational fluid dynamics model coupled with the discrete element method(CFD-DEM)to numerically explore powder migration and clogging in pebble beds.The model considers factors such as breeder orientation,purge velocity,powder size distribution,and friction coefficient.We propose two migration and clogging mechanisms.One involves powder with a large particle size,and the other does not.The results indicate that the powder migration velocity progresses through three stages:rapid decay,linear decay,and stability.Pebble-bed clogging manifests in two forms:extensive superficial clogging and uniform internal clogging.Two fitted curves were used to depict the migration and clogging tendencies.The powder size distribution significantly influenced the powder migration.The breeder orientation,powder size,and friction coefficient affected the distribution of the clogging powders.However,the impact of the purge velocity on powder migration and clogging in pebble beds was limited,and this effect varied significantly with different particle size ratios.Based on the analysis,a formula is proposed to characterize the behavior of the powder in the pebble beds.The results of this study can aid in analyzing and predicting powder dynamics in pebble beds.
基金supported by the National Natural Science Foundation of China(No.52274318).
文摘A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysis of typical slag rims for two highly crystalline powders revealed that their formation was primarily driven by the solidification of the liquid slag.Distinct differences were observed in the microstructures of slag rims from the two powders.Powder A(characterized by a higher breaking temperature and viscosity)displayed alternating lamellar microstructures of coarse and fine phases,with the coarse phases composed of akermanite-gehlenite transition phases.In contrast,powder B(with a lower breaking temperature and viscosity)predominantly comprised regular akermanite-gehlenite crystals interspersed with a certain amount of glassy phases.Numerical simulations of a three-phase fluid flow coupled with heat transfer indicate that slag rim formation correlates with mold oscillation.Solidification of the liquid slag at the slag rim front predominantly occurs during the negative stroke of the mold oscillation.The average heating rate during the ascending stage of the mold reaches approximately 100 K·s^(−1),whereas the average cooling rate during the descending stage attains 400 K·s^(−1).This temperature variation leads to the formation of lamellar microstructures,whereas the ascending stage promotes the formation of coarse structures and thicker slag rims.Based on the powder properties,two distinct formation pathways exist for highly crystalline mold powders.For the powders with a higher breaking temperature,higher viscosity,and narrower solidification range(powder A),coarse microstructures and thicker slag rims were preferentially formed.For powders with lower breaking temperature and viscosity and wider solidification ranges(powder B),the liquid slag resisted rapid solidification,and the extended mushy zone allowed the partial liquid slag to persist at the slag rim front,promoting the formation of a thin slag rim.This study enhances the understanding of slag rim formation in highly crystalline mold powders and provides critical insights into the control of longitudinal surface cracks in hypo-peritectic steel.
基金financially supported by the National Key Research and Development Program of China(No.2022YFC2904900)the National Natural Science Foundation of China(Nos.52204392,52274385,52204347)the Young Elite Scientists Sponsorship Program by CAST,China(No.2022QNRC001)。
文摘The leaching mechanism of gallium(Ga)and germanium(Ge)from zinc powder replacement residue(ZPRR)was investigated through ultrasonic-assisted sulfuric acid leaching.Characterization via XRD,SEM,XPS,and FT-IR revealed that ultrasonic treatment promotes the dehydration of H_(4)SiO_(4)colloids,thereby reducing their adsorption capacities for Ga and Ge complexes.Additionally,ultrasound enhances the dissolution of CaS in H_(2)SO_(4),increasing H_(2)S production,which aids in the reduction of Fe^(3+)and mitigates iron precipitate formation.Process parameters including ultrasonic power(0-450 W),temperature(100-120℃),and leaching time(30-120 min)were systematically optimized,achieving optimal leaching efficiencies of Ga and Ge at 95.7%and 94.5%,respectively.
基金supported by the National Key Researchand Development Program of China(No.2021YFC2801904)the Science Fund of Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai,China(No.AMGM2024F11).
文摘The ultrasonic energy field(UEF)-induced grain refinement mechanisms in laser powder direct energy deposition-manufactured Ti5321G alloys were systematically investigated in this study.This study focused on the interplay between recrystallization in the high-temperature solid deposition layers and the ultrasonic cavitation-acoustic streaming effects during molten pool solidification.A novel experimental design was developed to decouple these mechanisms by creating four distinct UEF action zones(without UEF-N,withUEF-S,with UEF-L,and with UEF-S+L)within a single-pass multilayer sample.This approach enabled the dual effects of UEF(recrystallization in solidified layers and ultrasonic cavitation-acoustic streaming effects in liquid pools)to be directly compared.The UEF significantly refined the microstructures,reducing the average grain size by 64.2%(from(399.6±28.6)to(143.1±16.1)μm)in the with UEF-S+L zone,while promoting columnar-to-equiaxed transition,with the equiaxed grain probability increasing from 11.1%(without UEF) to 53.8%.The texture intensity was reduced by approximately 52.4%and the mechanical properties were enhanced,achieving a 6.2% increase in yield strength((702.0±10.6)MPa)and 31.7%improvement in elongation.Crucially,this study revealed the synergistic effect of the dual-action mechanisms of UEF,where recrystallization and cavitation-acoustic streaming collectively enabled non-linear grain refinement.This study provides a strategy for microstructural control in additive manufacturing,eliminating the need for complex post-processing and thereby advancing the industrial application of high-performance titanium components.
基金support of the Research and Development Program in Key Areas of Guangdong Province,China(No.2019B090907001)the Science and Technology Program of Guangdong Province,China(No.2014B010129002)the National Key R&D Program of China(No.2017YFB0305800)。
文摘The densification characterization,phase constitution,precipitation evolution and mechanical performance of Al−Mg−Sc−Zr alloy processed by laser powder bed fusion(LPBF)were systematically investigated.Moreover,the evolution of phase constitution and precipitation behavior after heat treatment were characterized by using X-ray diffraction(XRD)and transmission electron microscope(TEM)analysis.The ultimate tensile strength(UTS)of as-built samples ranged from 396.8 to 414.6 MPa as the scanning speed decreased from 1600 to 1000 mm/s.After post heat treatment,the yield strength(YS)increased to(513.1±1.3)MPa,while the UTS increased from(414.6±5.1)to(539.2±1.5)MPa.The significant improvement of mechanical performance was ascribed to the formation of secondary Al3(Sc,Zr)precipitates.
基金supported by the National Natural Science Foundation of China(No.51871243)the National Key Laboratory of Strength and Structural Integrity,China(No.ASSIKFJJ202304001)+3 种基金the State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,China(No.PBSKL2022C01)the Guangdong-Hong Kong-Macao Joint Laboratory for Neutron Scattering Science and Technology,China(No.HT-CSNS-DG-CD-0092/2021)the Shock and Vibration of Engineering Materials and Structures Key Laboratory of Sichuan Province,China(No.22kfgk06)the Hubei Longzhong Laboratory,China(No.2022KF-08)。
文摘Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back scattering diffraction(EBSD)observations showed that the grains in melted zone(MZ)transformed into equiaxial grains with an average size of 1.31μm,and the grains in heat affected zone(HAZ)were refined.Moreover,the texture intensity dropped significantly from 13.86 to 6.35 in MZ and 10.79 in HAZ.The temperature gradient(G)to solidification rate(R)ratio decreased when the laser scanning speed slowed down to a certain extent in the LR process,which effectively improved the highly preferred orientation and filled the hole defects in the surface of LPBF-Ti6Al4V.Furthermore,the hardness,wear resistance and corrosion resistance of the surface of the LPBF samples were improved by LR treatment.
文摘We read with great interest the study by Zhang et al on Yiyi Fuzi Baijiang powder(YFB),which exemplifies the power of modern methods to validate traditional Chinese medicine(TCM).The key insight is that YFB doesn’t merely alter“good”or“bad”bacteria but restores the gut microbiota’s holistic equilibrium.This is powerfully shown by its paradoxical reduction of anaerobic probiotics like Bifidobacterium,rectifying the diseased,hypoxic environment,causing their aberrant overgrowth.This challenges the conventional probiotic paradigm and underscores a core TCM principle:Herbal formulas treat disease by restoring the body’s overall functional balance.Future research should focus on the interplay between herbal components,intestinal oxygen,and microbial metabolites to further unravel this sophisticated dialogue.
基金National Natural Science Foundation of China(52105385)Stable Support Plan Program of Shenzhen Natural Science Fund(20220810132537001)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2022A1515010781)Joint Fund of Henan Province Science and Technology R&D Program(225200810002)Fundamental Research Funds of Henan Academy of Sciences(240621041)。
文摘To enhance the mechanical properties of Mo alloys prepared through laser powder bed fusion(LPBF),a hot isostatic pressing(HIP)treatment was used.Results show that following HIP treatment,the porosity decreases from 0.27%to 0.22%,enabling the elements Mo and Ti to diffuse fully and to distribute more uniformly,and to forming a substantial number of low-angle grain boundaries.The tensile strength soars from 286±32 MPa to 598±22 MPa,while the elongation increases from 0.08%±0.02%to 0.18%±0.02%,without notable alterations in grain morphology during the tensile deformation.HIP treatment eliminates the molten pool boundaries,which are the primary source for premature failure in LPBFed Mo alloys.Consequently,HIP treatment emerges as a novel and effective approach for strengthening the mechanical properties of LPBFed Mo alloys,offering a fresh perspective on producing high-performance Mo-based alloys.
基金supported by the National Natural Science Foundation of China(No.52074157)Department of Education of Guangdong Province,China(No.2023KTSCX121)Shenzhen Science and Technology Programs,China(Nos.JSGG20210802154210032,JCYJ20210324104608023,JSGG20180508152608855)。
文摘A comparative study on the performance of gas atomized(GA)and rotating-disk atomized(RDA)aluminum alloy powders produced on industrial scale for laser directed energy deposition(L-DED)process was carried out.The powder characteristics,the printing process window,and the quality,microstructure,and mechanical properties of printed parts were taken into account for comparison and discussion.The results demonstrate that the RDA powder is superior to the GA powder in terms of sphericity,surface quality,internal defects,flowability,and apparent density,together with a larger printing process window during the L-DED parts fabrication.Besides,the resultant parts from the RDA powder have higher dimensional accuracy,lower internal defects,more uniform and finer microstructure,and more favorable mechanical properties than those from the GA powder.
基金financially supported by the Ministry of Science and Technology of China via the National Key Research&Development Plan(Nos.2022YFB3707105 and 2020YFA0405900)Jiangsu Department of Science and Technology via Provincial Key Research&Development(Industrial Foresight and Key Core Technology,No.BE2021037)+1 种基金Department of the National Science Foundation of China(No.52204390)the Natural Science Foundation of Jiangsu Province(No.BK20202010).
文摘Laser additively manufactured(LAM)Ni-based superalloys commonly exhibit low strength and high residual stress in the as-built state,requiring post-heat treatment to improve mechanical properties.We propose a modified heat treatment(MHT)process that only involves a single-step aging at 650℃ for 4 h to achieve high strength,high ductility,and low residual stress simultaneously in a laser powder bed fusion(LPBF)-processed Inconel 718(IN718)alloy.The MHT treated alloy exhibits comparable tensile strength(1368 MPa)to the conventional solution plus two-step aging(SA)treated alloy(1398 MPa),while the tensile elongation(∼21.7%for MHT treated alloy and 13.4%for SA treated alloy)is 60%higher and the residual stress(∼195 MPa)is 20%lower than the SA treated alloy.The balanced high performance of the MHT IN718 alloy was mainly attributed to the precipitation of abundantγ’’phase with a size of∼5 nm,while the original nano-sized Laves precipitates and dislocation cells were mostly retained.The finer size and higher fraction ofγ”of the MHT sample mainly result from the dislocation structure and compositional variations in the as-built IN718,which promotes precipitation during aging.The retention of Laves phase,and cellular dislocation network in the MHT alloy also contributes to work hardening during tension and suspends the occurrence of necking.This study unveils a unique strengthening and toughening mechanism in the Ni-based superalloy produced by LAM with the presence of abundant Laves precipitates and provides a simple,low energy-consumption and cost-effective heat treatment route for achieving desirable mechanical properties.
文摘BACKGROUND Ulcerative colitis(UC)is a chronic inflammatory disease affecting the colon.The most common psychological issue in UC patients is varying degrees of depre-ssion,which affects the condition and quality of life of UC patients and may lead to deterioration of the patient’s condition.UC drugs combined with anti-anxiety and antidepression drugs can alleviate symptoms of both depression and UC.Brain-derived neurotrophic factor(BDNF)precursor(proBDNF)/p75 neurotrophin receptor(p75NTR)/sortilin and BDNF/tropomyosin receptor kinase B(TrkB)signalling balance is essential for maintaining brain homeostasis and preventing the development of depressive behaviours.AIM To explore the mechanism by which Wuling powder regulates the proBDNF/p75NTR/sortilin and BDNF/TrkB pathways in the treatment of UC with depre-ssion.METHODS Depression was established in C57BL/6J mice via chronic restraint stress,and the UC model was induced with dextran sodium sulfate(DSS).In the treatment stage,mesalazine(MS)was the basic treatment,Wuling powder was the experimental treatment,and fluoxetine was the positive control drug for treating depression.Changes in intestinal mucosal inflammation,behaviour,and the proBDNFp75NTR/sortilin and BDNF/TrkB pathways were evaluated.RESULTS In the depression groups,Wuling powder decreased the immobility time,increased the distance travelled in the central zone and the total distance travelled,and restored balance in the proBDNF/p75NTR/sortilin and BDNF/TrkB signalling pathways.In the DSS and chronic restraint stress+DSS groups,immobility time increased,distance travelled in the central zone and total distance travelled decreased,activity of the proBDNF/p75NTR/sortilin pathway was upregulated,and activity of the BDNF/TrkB pathway was downregulated,indicating that mice with UC often have comorbid depression.Compared with those of MS alone,Wuling powder combined with MS further decreased the colon histopathological scores and the expression levels of tumor necrosis factor-alpha and interleukin-6 mRNAs.CONCLUSION This study confirmed that Wuling powder may play an antidepressant role by regulating the balance of the proBDNF/p75NTR/sortilin and BDNF/TrkB signalling pathways and further relieve intestinal inflammation in UC.
