Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue i...Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue in picking up formation P- and S-wave velocities. Previous studies on physical insulation for the collar waves designed on the collar between the source and the receiver sections did not bring to a satisfactory solution. In this paper, we investigate the propagation features of collar waves in different models. It is confirmed that there exists an indirect collar wave in the synthetic full waves due to the coupling between the drill collar and the borehole, even there is a perfect isolator between the source and the receiver. The direct collar waves propagating all along the tool and the indirect ones produced by echoes from the borehole wall are summarized as the generalized collar waves. Further analyses show that the indirect collar waves could be relatively strong in the full wave data. This is why the collar waves cannot be eliminated with satisfactory effect in many cases by designing the physical isolators carved on the tool.展开更多
Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data...Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data processing method and software have been applied to the Tahe oilfield in Northern West China to provide guidance to acid hydraulic fracturing design and evaluation. In this paper, we present the field examples of such data processing and applications to demonstrate the validity and advantages of our method and software package.展开更多
This article presents a case study concerning a seismic characterization project.Full-wave sonic logging was used to characterize the shallow compressional wave and shear wave velocity profiles in the site.Anomalous v...This article presents a case study concerning a seismic characterization project.Full-wave sonic logging was used to characterize the shallow compressional wave and shear wave velocity profiles in the site.Anomalous values of the Poisson’s ratio derived from the velocity profiles suggested that the boreholes might have traversed slow formations(i.e.with shear wave velocity smaller than the borehole fluid compressional wave velocity or“mud-wave speed”)and that conventional processing of the sonic logs might have misinterpreted the direct arrivals of fluid acoustic waves as arrivals caused by shear wave propagation in the rock.Consequently,the shear wave velocity profiles provided by the contractor were considered to be unreliable by the project team.To address these problems,a non-conventional determination of the shear wave velocity was implemented,based on the relationship between the Poisson’s ratio of the rock formation and the shape of the first train of sonic waves which arrived to the receivers in the sonic probe.The relationship was determined based on several hundreds of finite element simulations of the acoustic wave propagation in boreholes with the same diameter as used in the perforations.The present article describes how this non-conventional approach was developed and implemented to obtain the shear wave velocity profiles from the raw sonic logs.The approach allows an extension of the range of applicability of full-wave sonic logging to determination of shear wave velocity profiles in formations with low compressional wave velocities.The method could be used to obtain shear wave velocity profiles where compressional wave velocity is as low as slightly larger than the mud-wave speed.A sample sonic log in Log ASCII Standard(LAS)format is provided as supplementary material to this paper via Mendeley Data,together with the FORTRAN source code used to process the log following the approach described in this study.展开更多
This paper describes the three phenomena observed in full wave experiments： 1. the amplitudes （absolute value） of the first compressional and shear arrivals have the same variation rules; 2. the phases of the first...This paper describes the three phenomena observed in full wave experiments： 1. the amplitudes （absolute value） of the first compressional and shear arrivals have the same variation rules; 2. the phases of the first compressional and shear arrivals are always opposite to each other; and 3. the amplitude variation periods of the first compressional and shear arrivals are 2π. A full analysis and interpretation points out that these phenomena should appear under the full wave logging condition. Hence,the basis of using phase diffrences to extract useful information from the full wave is found.展开更多
Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural ...Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural network analysis are used in lithological interpretation in Jibei coal field. The prediction results indicate that this method can provide reliable data for thin coal exploitation and promising area evaluation.展开更多
For real-time inversion and fast reconstruction of formation true resistivity, the forward modeling of electromagnetic wave logging while drilling is usually based on the transversely isotropic formation model with ve...For real-time inversion and fast reconstruction of formation true resistivity, the forward modeling of electromagnetic wave logging while drilling is usually based on the transversely isotropic formation model with vertical symmetry axis(VTI medium), but it only considers the horizontal and vertical resistivity. It has certain limitation during practical application. This paper presents a forward calculation method of electromagnetic wave logging while drilling in transversely isotropic(TTI) strata with inclined symmetry axis based on the Dyadic Green’s function. Anisotropic angle and azimuth are used to characterize TTI formation. The proposed algorithm is verified by numerical examples, the half-space electromagnetic wave reflection and transmission characteristics with different media are analyzed, and the necessity to use the new algorithm is pointed out. Numerical simulation also shows that there exist a critical borehole dip and critical anisotropic angle in TTI formation. Electromagnetic wave logging while drilling responses follows opposite rule before and after these two critical angles. Besides, the 'horns' at the interface are not only related to well deviation, resistivity contrast, but also related to anisotropic angle and anisotropic azimuth.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11134011 and 11374322)the Foresight Research Project,Institute of Acoustics,Chinese Academy of Sciences
文摘Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue in picking up formation P- and S-wave velocities. Previous studies on physical insulation for the collar waves designed on the collar between the source and the receiver sections did not bring to a satisfactory solution. In this paper, we investigate the propagation features of collar waves in different models. It is confirmed that there exists an indirect collar wave in the synthetic full waves due to the coupling between the drill collar and the borehole, even there is a perfect isolator between the source and the receiver. The direct collar waves propagating all along the tool and the indirect ones produced by echoes from the borehole wall are summarized as the generalized collar waves. Further analyses show that the indirect collar waves could be relatively strong in the full wave data. This is why the collar waves cannot be eliminated with satisfactory effect in many cases by designing the physical isolators carved on the tool.
基金This project is sponsored by Natural Science Foundation of China supported project No. 50674098.
文摘Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data processing method and software have been applied to the Tahe oilfield in Northern West China to provide guidance to acid hydraulic fracturing design and evaluation. In this paper, we present the field examples of such data processing and applications to demonstrate the validity and advantages of our method and software package.
文摘This article presents a case study concerning a seismic characterization project.Full-wave sonic logging was used to characterize the shallow compressional wave and shear wave velocity profiles in the site.Anomalous values of the Poisson’s ratio derived from the velocity profiles suggested that the boreholes might have traversed slow formations(i.e.with shear wave velocity smaller than the borehole fluid compressional wave velocity or“mud-wave speed”)and that conventional processing of the sonic logs might have misinterpreted the direct arrivals of fluid acoustic waves as arrivals caused by shear wave propagation in the rock.Consequently,the shear wave velocity profiles provided by the contractor were considered to be unreliable by the project team.To address these problems,a non-conventional determination of the shear wave velocity was implemented,based on the relationship between the Poisson’s ratio of the rock formation and the shape of the first train of sonic waves which arrived to the receivers in the sonic probe.The relationship was determined based on several hundreds of finite element simulations of the acoustic wave propagation in boreholes with the same diameter as used in the perforations.The present article describes how this non-conventional approach was developed and implemented to obtain the shear wave velocity profiles from the raw sonic logs.The approach allows an extension of the range of applicability of full-wave sonic logging to determination of shear wave velocity profiles in formations with low compressional wave velocities.The method could be used to obtain shear wave velocity profiles where compressional wave velocity is as low as slightly larger than the mud-wave speed.A sample sonic log in Log ASCII Standard(LAS)format is provided as supplementary material to this paper via Mendeley Data,together with the FORTRAN source code used to process the log following the approach described in this study.
文摘This paper describes the three phenomena observed in full wave experiments： 1. the amplitudes （absolute value） of the first compressional and shear arrivals have the same variation rules; 2. the phases of the first compressional and shear arrivals are always opposite to each other; and 3. the amplitude variation periods of the first compressional and shear arrivals are 2π. A full analysis and interpretation points out that these phenomena should appear under the full wave logging condition. Hence,the basis of using phase diffrences to extract useful information from the full wave is found.
文摘Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural network analysis are used in lithological interpretation in Jibei coal field. The prediction results indicate that this method can provide reliable data for thin coal exploitation and promising area evaluation.
基金Supported by the National Natural Science Foundation of China(41474100,41574118)
文摘For real-time inversion and fast reconstruction of formation true resistivity, the forward modeling of electromagnetic wave logging while drilling is usually based on the transversely isotropic formation model with vertical symmetry axis(VTI medium), but it only considers the horizontal and vertical resistivity. It has certain limitation during practical application. This paper presents a forward calculation method of electromagnetic wave logging while drilling in transversely isotropic(TTI) strata with inclined symmetry axis based on the Dyadic Green’s function. Anisotropic angle and azimuth are used to characterize TTI formation. The proposed algorithm is verified by numerical examples, the half-space electromagnetic wave reflection and transmission characteristics with different media are analyzed, and the necessity to use the new algorithm is pointed out. Numerical simulation also shows that there exist a critical borehole dip and critical anisotropic angle in TTI formation. Electromagnetic wave logging while drilling responses follows opposite rule before and after these two critical angles. Besides, the 'horns' at the interface are not only related to well deviation, resistivity contrast, but also related to anisotropic angle and anisotropic azimuth.
