Installing annular wave-energy converters(WECs)on the columns of floating wind platforms in the form of a coaxial-cylinder provides a convenient means of integration.Extant coaxial-cylinder-type wind-wave hybrid syste...Installing annular wave-energy converters(WECs)on the columns of floating wind platforms in the form of a coaxial-cylinder provides a convenient means of integration.Extant coaxial-cylinder-type wind-wave hybrid systems are mostly based on single-column platforms such as spars(single coaxial-cylinder hybrid system'hereafter).Systems based on multiple-column platforms such as semi-submersible platforms('multiple coaxial-cylinder hybrid systems'hereafter)are rarely seen or studied,despite their superiority in wave-power absorption due to the use of multiple WECs as well as in dynamic stability.This paper proposes a novel WindFloat-annular-WEC hybrid system,based on our study investigating its dynamic and power features,and optimizing the geometry and power take-off of the WECs.Our results show that the dynamic and power features of a multiple coaxial-cylinder hybrid system are different from those of a single coaxial-cylinder hybrid system,so the same optimization parameters cannot be directly applied.Flatter annular WECs absorb slightly more power in a wider wave-period range,but their geometry is confined by limitations in installation and structural strength.The overall effect of an oblique incident wave is greater intensity in the motions of the hybrid system in yaw and the direction perpendicular to propagation,although the difference is small and maybe negligible.展开更多
As the energy supply problem worsens, the development and utilization of marine renewable energy have become a research hotspot. The development of wave energy is moving from the near shore to the distant sea. The pow...As the energy supply problem worsens, the development and utilization of marine renewable energy have become a research hotspot. The development of wave energy is moving from the near shore to the distant sea. The power-generation efficiency of a single two-floating-body wave-energy converter is relatively low. To fully utilize wave energy and improve the wave-energy capture rate of a fixed sea area, arranging a two-floating-body wave-energy converter array is necessary. This paper first introduces the basic theory of multi-floating flow field, time-domain calculation method, and influence factor of the waveenergy converter array. Then, the development of AQWA software in Fortran language considers the effect of power takeoff. A calculation method based on ANSYS–AQWA is proposed to simulate the motion of the oscillating-buoy two-floating-body wave-energy converter. The results are compared with the experimental results from the National Renewable Energy Laboratory. Finally, the ANSYS–AQWA method is used to study the power characteristics of simple and complex arrays of wave-energy converters. The average power generation of simple arrays is largest at 0°, and the average power generation of complex arrays does not change with the wave direction. Optimal layout spacing exists for the simple and complex arrays. These findings can serve as a valuable reference for the large-scale array layout of wave-energy converters in the future.展开更多
To facilitate the commercialization of wave energy in an array or farm environment, effective control strategies for improving energy extraction efficiency of the system are important. In this paper, we develop and ap...To facilitate the commercialization of wave energy in an array or farm environment, effective control strategies for improving energy extraction efficiency of the system are important. In this paper, we develop and apply model-predictive control(MPC) to a heaving point-absorber array, where the optimization problem is cast into a convex quadratic programming(QP)formulation,which can be efficiently solved by a standard QP solver. We introduced a term for penalizing large slew rates in the cost function to ensure the convexity of this function. Constraints on both range of the states and the input capacity can be accommodated. The convex formulation reduces the computational hurdles imposed on conventional nonlinear MPC. For illustration of the control principles,a point-absorber approximation is adopted to simplify the representation of the hydrodynamic coefficients among the array by exploiting the small devices to wavelength assumption. The energycapturing capabilities of a two-cylinder array in regular and irregular waves are investigated. The performance of the MPC for this two-WEC array is compared to that for a single WEC, and the behavior of the individual devices in head or beam wave configuration is explained. Also shown is the reactive power required by the power takeoff system to achieve the performance.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52201322,52222109,and 52071096)the Guangdong Basic and Applied Basic Research Foundation(Nos.2022B1515020036 and 2023A1515012144)the Natural Science Foundation of Guangzhou City(No.202201010055),China.
文摘Installing annular wave-energy converters(WECs)on the columns of floating wind platforms in the form of a coaxial-cylinder provides a convenient means of integration.Extant coaxial-cylinder-type wind-wave hybrid systems are mostly based on single-column platforms such as spars(single coaxial-cylinder hybrid system'hereafter).Systems based on multiple-column platforms such as semi-submersible platforms('multiple coaxial-cylinder hybrid systems'hereafter)are rarely seen or studied,despite their superiority in wave-power absorption due to the use of multiple WECs as well as in dynamic stability.This paper proposes a novel WindFloat-annular-WEC hybrid system,based on our study investigating its dynamic and power features,and optimizing the geometry and power take-off of the WECs.Our results show that the dynamic and power features of a multiple coaxial-cylinder hybrid system are different from those of a single coaxial-cylinder hybrid system,so the same optimization parameters cannot be directly applied.Flatter annular WECs absorb slightly more power in a wider wave-period range,but their geometry is confined by limitations in installation and structural strength.The overall effect of an oblique incident wave is greater intensity in the motions of the hybrid system in yaw and the direction perpendicular to propagation,although the difference is small and maybe negligible.
基金Supported by the National Natural Science Foundation of China under Grant Nos.5171101175,11572094,51809083,and 51579055
文摘As the energy supply problem worsens, the development and utilization of marine renewable energy have become a research hotspot. The development of wave energy is moving from the near shore to the distant sea. The power-generation efficiency of a single two-floating-body wave-energy converter is relatively low. To fully utilize wave energy and improve the wave-energy capture rate of a fixed sea area, arranging a two-floating-body wave-energy converter array is necessary. This paper first introduces the basic theory of multi-floating flow field, time-domain calculation method, and influence factor of the waveenergy converter array. Then, the development of AQWA software in Fortran language considers the effect of power takeoff. A calculation method based on ANSYS–AQWA is proposed to simulate the motion of the oscillating-buoy two-floating-body wave-energy converter. The results are compared with the experimental results from the National Renewable Energy Laboratory. Finally, the ANSYS–AQWA method is used to study the power characteristics of simple and complex arrays of wave-energy converters. The average power generation of simple arrays is largest at 0°, and the average power generation of complex arrays does not change with the wave direction. Optimal layout spacing exists for the simple and complex arrays. These findings can serve as a valuable reference for the large-scale array layout of wave-energy converters in the future.
文摘To facilitate the commercialization of wave energy in an array or farm environment, effective control strategies for improving energy extraction efficiency of the system are important. In this paper, we develop and apply model-predictive control(MPC) to a heaving point-absorber array, where the optimization problem is cast into a convex quadratic programming(QP)formulation,which can be efficiently solved by a standard QP solver. We introduced a term for penalizing large slew rates in the cost function to ensure the convexity of this function. Constraints on both range of the states and the input capacity can be accommodated. The convex formulation reduces the computational hurdles imposed on conventional nonlinear MPC. For illustration of the control principles,a point-absorber approximation is adopted to simplify the representation of the hydrodynamic coefficients among the array by exploiting the small devices to wavelength assumption. The energycapturing capabilities of a two-cylinder array in regular and irregular waves are investigated. The performance of the MPC for this two-WEC array is compared to that for a single WEC, and the behavior of the individual devices in head or beam wave configuration is explained. Also shown is the reactive power required by the power takeoff system to achieve the performance.
