Spectral element method（SEM） for elastic media is well known for its great flexibility and high accuracy in solving problems with complex geometries.It is an advanced choice for wave simulations.Due to anelasticity ...Spectral element method（SEM） for elastic media is well known for its great flexibility and high accuracy in solving problems with complex geometries.It is an advanced choice for wave simulations.Due to anelasticity of earth media,SEM for elastic media is no longer appropriate.On fundamental of the second-order elastic SEM,this work takes the viscoelastic wave equations and the vertical transversely isotropic（VTI） media into consideration,and establishes the second-order SEM for wave modeling in viscoelastic VTI media.The second-order perfectly matched layer for viscoelastic VTI media is also introduced.The problem of handling the overlapped absorbed corners is solved.A comparison with the analytical solution in a twodimensional viscoelastic homogeneous medium shows that the method is accurate in the wave-field modeling.Furtherly,numerical validation also presents its great flexibility in solving wave propagation problems in complex heterogeneous media.This second-order SEM with perfectly matched layer for viscoelastic VTI media can be easily applied in wave modeling in a limited region.展开更多
The studied area is located in the northwestern Morocco. It occupies a 2.5 km long of coastline on the Atlantic shore. It is oriented NNE-SSW, clearly exposed to the dominant swells coming from west to northwest. The ...The studied area is located in the northwestern Morocco. It occupies a 2.5 km long of coastline on the Atlantic shore. It is oriented NNE-SSW, clearly exposed to the dominant swells coming from west to northwest. The aim of this study is to determine the capacity of the waves that hit the shore to transport the sediments. To achieve our goal we chose a methodology that combines field sampling and laboratory analysis with digital modeling. In the first phase we sampled sediments from the study area along and across the beach line, dry sieving was used to determine the grain size distribution and the statistics derived from the sand samples were used to determine the critical shield stress （z＇cr, b） also to investigate the spatial variability and influence of transport on grain size characteristics. As for the second phase, we intended to create a wave climate modeling based on nautical chart, using ArcGIS then Matlab that allowed us to obtain the Swan model for the area. The correlation between those results showed the degree of contribution of wave in the distribution of sediments along the shore.展开更多
This study applies Ensemble Optimal Interpolation(EnOI)to assimilate individual spectral components derived from National Data Buoy Center(NDBC)buoy directional spectra into the WAVEWATCHⅢ(WW3)wave model during tropi...This study applies Ensemble Optimal Interpolation(EnOI)to assimilate individual spectral components derived from National Data Buoy Center(NDBC)buoy directional spectra into the WAVEWATCHⅢ(WW3)wave model during tropical cyclone(TC)Isaias(2020).The analysis provides a comprehensive evaluation of the assimilation’s impact on wave parameters,frequency spectra,and directional spectra.Two series of assimilation experiments—one based on spectral components(Exp^(*)-DaSpec)and the other on significant wave height(Exp^(*)-DaSWH)—are evaluated against a non-assimilated control run(Exp-NoDa).Particular focus is placed on six key parameters:SWH,mean wave period(MWP),mean wave direction(MWD),mean wave directional spread(MWS),dominant wave period(DWP),and dominant wave direction(DWD).Sensitivity analyses suggest 400 km and 0.30 as appropriate values for the localization radius and observation error variance,respectively,though no single setting is optimal across all wave parameters.Exp4-DaSWH and Exp4-DaSpec are therefore selected as representative experiments.In non-independent validation,Exp4-DaSpec generally outperforms Exp-NoDa across MWP,MWD,MWS,DWP,and DWD,demonstrating closer agreement with observed frequency spectra and directional patterns.In independent validation,Exp4-DaSpec maintains superior overall performance,whereas Exp4-DaSWH shows only limited improvement.Exp4-DaSWH may capture the spectral peak near 0.1 Hz,although its directional characteristics remain largely similar to those of Exp-NoDa.Importantly,the assimilation experiments significantly improve SWH in both non-independent and independent validations,with Exp4-DaSWH slightly outperforming Exp4-DaSpec overall.展开更多
The propagation and transformation of multi-directional and uni-directional random waves over a coast with complicated bathymetric and geometric features are studied experimentally and numerically. Laboratory investig...The propagation and transformation of multi-directional and uni-directional random waves over a coast with complicated bathymetric and geometric features are studied experimentally and numerically. Laboratory investigation indicates that wave energy convergence and divergence cause strong coastal currents to develop and inversely modify the wave fields. A coastal spectral wave model, based on the wave action balance equation with diffraction effect （WABED）, is used to simulate the transformation of random waves over the complicated bathymetry. The diffraction effect in the wave model is derived from a parabolic approximation of wave theory, and the mean energy dissipation rate per unit horizontal area due to wave breaking is parameterized by the bore-based formulation with a breaker index of 0.73. The numerically simulated wave field without considering coastal currents is different from that of experiments, whereas model results considering currents clearly reproduce the intensification of wave height in front of concave shorelines.展开更多
Frequency domain wave equation forward modeling is a problem of solving large scale linear sparse systems which is often subject to the limits of computational efficiency and memory storage. Conventional Gaussian elim...Frequency domain wave equation forward modeling is a problem of solving large scale linear sparse systems which is often subject to the limits of computational efficiency and memory storage. Conventional Gaussian elimination cannot resolve the parallel computation of huge data. Therefore, we use the Gaussian elimination with static pivoting （GESP） method for sparse matrix decomposition and multi-source finite-difference modeling. The GESP method does not only improve the computational efficiency but also benefit the distributed parallel computation of matrix decomposition within a single frequency point. We test the proposed method using the classic Marmousi model. Both the single-frequency wave field and time domain seismic section show that the proposed method improves the simulation accuracy and computational efficiency and saves and makes full use of memory. This method can lay the basis for waveform inversion.展开更多
In this paper, the ability of the distinct lattice spring model （DLSM） for modeling stress wave propagation in rocks was fully investigated. The influence of particle size on simulation of different types of stress ...In this paper, the ability of the distinct lattice spring model （DLSM） for modeling stress wave propagation in rocks was fully investigated. The influence of particle size on simulation of different types of stress waves （e.g. one-dimensional （1D） P-wave, 1D S-wave and two-dimensional （2D） cylindrical wave） was studied through comparing results predicted by the DLSM with different mesh ratios （It） and those obtained from the corresponding analytical solutions. Suggested values of lr were obtained for modeling these stress waves accurately. Moreover, the weak material layer method and virtual joint plane method were used to model P-wave and S-wave propagating through a single discontinuity. The results were compared with the classical analytical solutions, indicating that the virtual joint plane method can give better results and is recommended. Finally, some remarks of the DLSM on modeling of stress wave propagation in rocks were provided.展开更多
A local-scale phase-resolving wave transformation model with CGWAVE is established in connection with a regional-scale coupled STWAVE-ADCIRC wave-current model for its application in the Half Moon Bay, Grays Harbor.Wa...A local-scale phase-resolving wave transformation model with CGWAVE is established in connection with a regional-scale coupled STWAVE-ADCIRC wave-current model for its application in the Half Moon Bay, Grays Harbor.Wave transformation from offshore to the harbor entrance is simulated by the STWAVE model which includes wave-current interaction.The STWAVE results provide incident wave conditions for the local-scale CGWAVE model at its outer boundary. A simple method is developed to take into account the lateral variation of wave height in constructing the model’s wave boundary conditions.The model was validated for three wave condition cases which yielded good agreement with field data.The validated model was applied to predicting nearshore waves in the Half Moon Bay and longshore transport parameters along the wave breaking line for the existing condition and three engineering alternatives. A comparative analysis indicated that storm waves that have a combination of long period and large height are the most destructive to the crenulate shoreline in the Half Moon Bay; both 152 m jetty extension (Alt. 2) and diffraction mound enlargement (Alt. 3) would significantly reduce breaking wave height and longshore transport potential in the southwest corner of Half Moon Bay.展开更多
This paper provides an overview of the global wave resource for energy exploration.The most popular metrics and estimators for wave energy resource characterization have been compiled and classified by levels of energ...This paper provides an overview of the global wave resource for energy exploration.The most popular metrics and estimators for wave energy resource characterization have been compiled and classified by levels of energy exploration.A review of existing prospective wave energy resource assessments worldwide is also given,and those studies have been collated and classified by continent.Finally,information about forty existing open sea wave energy test sites worldwide and their characteristics is depicted and displayed on a newly created global map.It has been found that wave power density is still the most consensual metric used for wave energy resource assessment purposes among researchers.Nonetheless,to accomplish a comprehensive wave resource assessment for exploitation,the computation of other metrics at the practicable,technical,and socio-economic levels has also been performed at both spatial and temporal domains.Overall,regions in latitudes between 40°and 60°of both hemispheres are those where the highest wave power density is concentrated.Some areas where the most significant wave power density occurs are in offshore regions of southern Australia,New Zealand,South Africa,Chile,the British Isles,Iceland,and Greenland.However,Europe has been the continent where most research efforts have been done targeting wave energy characterisation for exploitation.展开更多
In order to realize real-time simulation of ocean surface near the seashore, a new modeling method for shallow ocean wave and a level of detail （LOD） scheme are proposed in this paper. This modeling method describes...In order to realize real-time simulation of ocean surface near the seashore, a new modeling method for shallow ocean wave and a level of detail （LOD） scheme are proposed in this paper. This modeling method describes ocean wave by modifying the sine wave, and gets wave direction at any ocean floor position by using wave number decomposition. The LOD scheme is proposed to realize real-time rendering of large-scale ocean surface by simplifying the ocean surface regular mesh based on real-time optimally adapting meshes （ROAM）. Experimental results show that this method can get fast rendering speed and realistic effect.展开更多
This paper describes an investigation of the generation of desired sea states in a numerical wave model. Bimodal sea states containing energetic swell components can be coastal hazards along coastlines exposed to larg...This paper describes an investigation of the generation of desired sea states in a numerical wave model. Bimodal sea states containing energetic swell components can be coastal hazards along coastlines exposed to large oceanic fetches. Investigating the effects of long-period bimodal seas requires large computational domains and increased running time to ensure the development of the desired sea state. Long computational runs can cause mass stability issues due to the Stokes drift and wave reflection, which in turn affect results through the variation of the water level. A numerical wave flume, NEWRANS, was used to investigate two wave generation methods： the wave paddle method, allowing for a smaller domain; and the internal mass source function method, providing an open boundary allowing reflected waves to leave the domain. The two wave generation methods were validated against experimental data by comparing the wave generation accuracy and the variance of mass in the model during simulations. Results show that the wave paddle method not only accurately generates the desired sea state but also provides a more stable simulation, in which mass fluctuation has less of an effect on the water depth during the long-duration simulations. As a result, it is suggested that the wave paddle method with active wave absorption is preferable to the internal wave maker option when investigating intermediate-depth long-period bimodal seas for long-duration simulations.展开更多
Accurately forecasting ocean waves during typhoon events is extremely important in aiding the mitigation and minimization of their potential damage to the coastal infrastructure, and the protection of coastal communit...Accurately forecasting ocean waves during typhoon events is extremely important in aiding the mitigation and minimization of their potential damage to the coastal infrastructure, and the protection of coastal communities. However, due to the complex hydrological and meteorological interaction and uncertainties arising from different modeling systems, quantifying the uncertainties and improving the forecasting accuracy of modeled typhoon-induced waves remain challenging. This paper presents a practical approach to optimizing model-ensemble wave heights in an attempt to improve the accuracy of real-time typhoon wave forecasting. A locally weighted learning algorithm is used to obtain the weights for the wave heights computed by the WAVEWATCH III wave model driven by winds from four different weather models （model-ensembles）. The optimized weights are subsequently used to calculate the resulting wave heights from the model-ensembles. The results show that the opti- mization is capable of capturing the different behavioral effects of the different weather models on wave generation. Comparison with the measurements at the selected wave buoy locations shows that the optimized weights, obtained through a training process, can significantly improve the accuracy of the forecasted wave heights over the standard mean values, particularly for typhoon-induced peak waves. The results also indicate that the algorithm is easy to imnlement and practieal for real-time wave forecasting.展开更多
In the last two decades,the exploitation of marine renewable energies(70%of the globe is made up of oceans),especially wave energy,has attracted great interest,not only for their high potential,but also for their high...In the last two decades,the exploitation of marine renewable energies(70%of the globe is made up of oceans),especially wave energy,has attracted great interest,not only for their high potential,but also for their high energy density.The development of wave energy is suitable for countries or regions with extensive coastline and high waves approaching the shore.This paper focuses on the study of wave potential and wave energy distribution in the Casablanca-Mohammedia nearshore area(Moroccan Atlantic coast)in order to identify prospective wave energy hotspots.To achieve this purpose,the offshore wave potential was firstly estimated from a 20 years wave data provided by ECMWF(European Center for Medium range Weather Forecasts).In the second step,a numerical modeling of the wave propagation in the study area was performed using the SWAN model jointly with WAVEWATCHIII.The performance of the model to simulate accurately the wave field was evaluated in a real situation characterized by large waves.The model then was applied to determine the patterns of wave field in the Casablanca-Mohammedia nearshore area for a typical wave conditions(winter,summer and storm).The results of this study show the abundance of wave energy in the region with an average annual wave potential of about 22 kW/m.A seasonal variability of the wave resource was demonstrated,with values five times higher in winter than in summer.In addition,a major hotspot site was identified that should be considered when studyingWEC implementation.This hotspot is located at the southern edge of the Casablanca-Mohammedia coast,near the coastal area of Sidi Rahal.展开更多
Fractional energy losses of waves due to wave breaking when passing over a submerged bar are studied systematically using a modified numerical code that is based on the high-order Boussinesq-type equations.The model i...Fractional energy losses of waves due to wave breaking when passing over a submerged bar are studied systematically using a modified numerical code that is based on the high-order Boussinesq-type equations.The model is first tested by the additional experimental data,and the model's capability of simulating the wave transformation over both gentle slope and steep slope is demonstrated.Then,the model's breaking index is replaced and tested.The new breaking index,which is optimized from the several breaking indices,is not sensitive to the spatial grid length and includes the bottom slopes.Numerical tests show that the modified model with the new breaking index is more stable and efficient for the shallow-water wave breaking.Finally,the modified model is used to study the fractional energy losses for the regular waves propagating and breaking over a submerged bar.Our results have revealed that how the nonlinearity and the dispersion of the incident waves as well as the dimensionless bar height(normalized by water depth) dominate the fractional energy losses.It is also found that the bar slope(limited to gentle slopes that less than 1:10) and the dimensionless bar length(normalized by incident wave length) have negligible effects on the fractional energy losses.展开更多
In previous studies, an isosceles triangular-type possibility distribution was employed to represent the analog waves of a Gaussian Process. The model was then projected onto actual waves using Zadeh’s extension prin...In previous studies, an isosceles triangular-type possibility distribution was employed to represent the analog waves of a Gaussian Process. The model was then projected onto actual waves using Zadeh’s extension principle of mapping (Hori et al., 2019). Furthermore, by applying Vague Set and Systems theory, it was shown that the actual waves followed a Gaussian process, and that the system could be efficiently controlled via Monte Carlo simulation. However, due to the use of fuzzy OR logic in the extension principle of mapping and wave synthesis, the resulting ambiguity increased significantly. To address this issue, a Possibility Markov Chain was proposed, incorporating possibility theory to mitigate the explosion of ambiguity. In this study, we propose a novel modeling approach that utilizes a possibility transition matrix without relying on fuzzy OR logic. Additionally, we introduce the Sea-Control Algorithm, which artificially introduces system error into the system function, thereby enabling modification of the possibility transition matrix through the deliberate manipulation of possibility information within the fuzzy system.展开更多
The LAGFD-WAM wave model is a third generation wave model. In the present paper the physical aspect of the model was shown in great detail including energy spectrum balance equation, complicated characteristics equati...The LAGFD-WAM wave model is a third generation wave model. In the present paper the physical aspect of the model was shown in great detail including energy spectrum balance equation, complicated characteristics equations and source functions.展开更多
In this paper the parameterizational approach of nonlinear source function and the implicit scheme of the model are discussed in detail. The matching problem is solved between time and space steps using the characteri...In this paper the parameterizational approach of nonlinear source function and the implicit scheme of the model are discussed in detail. The matching problem is solved between time and space steps using the characteristics inlaid scheme with very strong physical meaning. The computational comparison in typical winds shows some improvements to the WAM model. That the hindcast results of the model for typhoon cases are in good agreement with real data illustrates its applicability to wave forecast and engineering study.展开更多
The authors make an endeavor to explain why a new hybrid wave model is here proposed when several such models have already been in operation and the so- called third generation wave modej is proving attractive. This p...The authors make an endeavor to explain why a new hybrid wave model is here proposed when several such models have already been in operation and the so- called third generation wave modej is proving attractive. This part of the paper is devoted to the wind wave model. Both deep and shallow water models have been developed, the former being actually a special case of the latter when water depth is great. The deep water model is exceptionally simple in form. Significant wave height is the only prognostic variable. In comparison with the usual methods to compute the energy input and dissipations empirically or by 'tuning', the proposed model has the merit that the effects of all source terms are combined into one term which is computed through empirical growth relations for significant waves, these relations being, relatively speaking, easier and more reliable to obtain than those for the source terms in the spectral energy balance equation. The discrete part of the model and the implementation of the model as a whole will be discussed in the second part of the present paper.展开更多
New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions. Experimental data collected in the wave basin of the University of Delaware were used t...New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions. Experimental data collected in the wave basin of the University of Delaware were used to test its performance. Wave heights were compared in the four cases （with different wave energies and directional spreading spectra）. The results agreed well with the measurements, especially for the broad directional spectra cases. The effect of wave diffraction was analyzed by switching on/off the corresponding tenn. By introducing the diffraction term, the distributions of wave height and wave direction were smoothed, especially obvious for the narrow spectrum cases. Compared with the calculations without diffraction, the model with diffraction effect gave better results.展开更多
One of the new methods for powering low-power electronic devices at sea is a wave energy harvesting system. In this method, piezoelectric material is employed to convert the mechanical energy of sea waves into electri...One of the new methods for powering low-power electronic devices at sea is a wave energy harvesting system. In this method, piezoelectric material is employed to convert the mechanical energy of sea waves into electrical energy. The advantage of this method is based on avoiding a battery charging system. Studies have been done on energy harvesting from sea waves, however, considering energy harvesting with random JONSWAP wave theory, then determining the optimum values of energy harvested is new. This paper does that by implementing the JONSWAP wave model, calculating produced power, and realistically showing that output power is decreased in comparison with the more simple Airy wave model. In addition, parameters of the energy harvester system are optimized using a simulated annealing algorithm, yielding increased produced power.展开更多
Reasonably accurate predictions of wave heights, current and elevations during storm events are vital information for marine operations and design of offshore and coastal structures in the surrounding seas of Korea Pe...Reasonably accurate predictions of wave heights, current and elevations during storm events are vital information for marine operations and design of offshore and coastal structures in the surrounding seas of Korea Peninsula. Ocean circulation and wind-wave models have traditionally been run separately, but recent researches have identified potentially important interactions between current and wave motions. The coupled tide-surge and the WAM wave models at the atmospheric boundary layer and bottom boundary layer around the Korea Peninsula are applied for the Typhoon Maemi （0314） event. Communication between the models is aehievod using MPI. Results are compared with coastal tide gauges and moored wave buoys and comparisons are also made between wave computations from the coupled model and the independent third generation wave models. Results suggest that applying the fide-surge-coupled model can be an effective means of obtaining wave and storm surge predictions simultaneously.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant No.41304077)Postdoctoral Science Foundation of China (Grant No.2013M531744,2014T70740)+1 种基金Key Laboratory of Geospace Environment and Geodesy (Grant No.12-02-03)Subsurface Multi-scale Imaging Laboratory (Grant No.SMIL-2014-01)
文摘Spectral element method（SEM） for elastic media is well known for its great flexibility and high accuracy in solving problems with complex geometries.It is an advanced choice for wave simulations.Due to anelasticity of earth media,SEM for elastic media is no longer appropriate.On fundamental of the second-order elastic SEM,this work takes the viscoelastic wave equations and the vertical transversely isotropic（VTI） media into consideration,and establishes the second-order SEM for wave modeling in viscoelastic VTI media.The second-order perfectly matched layer for viscoelastic VTI media is also introduced.The problem of handling the overlapped absorbed corners is solved.A comparison with the analytical solution in a twodimensional viscoelastic homogeneous medium shows that the method is accurate in the wave-field modeling.Furtherly,numerical validation also presents its great flexibility in solving wave propagation problems in complex heterogeneous media.This second-order SEM with perfectly matched layer for viscoelastic VTI media can be easily applied in wave modeling in a limited region.
文摘The studied area is located in the northwestern Morocco. It occupies a 2.5 km long of coastline on the Atlantic shore. It is oriented NNE-SSW, clearly exposed to the dominant swells coming from west to northwest. The aim of this study is to determine the capacity of the waves that hit the shore to transport the sediments. To achieve our goal we chose a methodology that combines field sampling and laboratory analysis with digital modeling. In the first phase we sampled sediments from the study area along and across the beach line, dry sieving was used to determine the grain size distribution and the statistics derived from the sand samples were used to determine the critical shield stress （z＇cr, b） also to investigate the spatial variability and influence of transport on grain size characteristics. As for the second phase, we intended to create a wave climate modeling based on nautical chart, using ArcGIS then Matlab that allowed us to obtain the Swan model for the area. The correlation between those results showed the degree of contribution of wave in the distribution of sediments along the shore.
基金The Youth Talent Support Program for Doctoral Students of the China Association for Science and Technologythe Key Laboratory of Space Ocean Remote Sensing and Application at Ministry of Natural Resources under contract No.2023CFO005+1 种基金the National Natural Science Foundation of China under contract No.42176011the Fundamental Research Funds for the Central Universities under contract No.24CX03001A.
文摘This study applies Ensemble Optimal Interpolation(EnOI)to assimilate individual spectral components derived from National Data Buoy Center(NDBC)buoy directional spectra into the WAVEWATCHⅢ(WW3)wave model during tropical cyclone(TC)Isaias(2020).The analysis provides a comprehensive evaluation of the assimilation’s impact on wave parameters,frequency spectra,and directional spectra.Two series of assimilation experiments—one based on spectral components(Exp^(*)-DaSpec)and the other on significant wave height(Exp^(*)-DaSWH)—are evaluated against a non-assimilated control run(Exp-NoDa).Particular focus is placed on six key parameters:SWH,mean wave period(MWP),mean wave direction(MWD),mean wave directional spread(MWS),dominant wave period(DWP),and dominant wave direction(DWD).Sensitivity analyses suggest 400 km and 0.30 as appropriate values for the localization radius and observation error variance,respectively,though no single setting is optimal across all wave parameters.Exp4-DaSWH and Exp4-DaSpec are therefore selected as representative experiments.In non-independent validation,Exp4-DaSpec generally outperforms Exp-NoDa across MWP,MWD,MWS,DWP,and DWD,demonstrating closer agreement with observed frequency spectra and directional patterns.In independent validation,Exp4-DaSpec maintains superior overall performance,whereas Exp4-DaSWH shows only limited improvement.Exp4-DaSWH may capture the spectral peak near 0.1 Hz,although its directional characteristics remain largely similar to those of Exp-NoDa.Importantly,the assimilation experiments significantly improve SWH in both non-independent and independent validations,with Exp4-DaSWH slightly outperforming Exp4-DaSpec overall.
基金supported by the Program for New Century Excellent Talents in Universities (Grant No. NCET-07-0255)
文摘The propagation and transformation of multi-directional and uni-directional random waves over a coast with complicated bathymetric and geometric features are studied experimentally and numerically. Laboratory investigation indicates that wave energy convergence and divergence cause strong coastal currents to develop and inversely modify the wave fields. A coastal spectral wave model, based on the wave action balance equation with diffraction effect （WABED）, is used to simulate the transformation of random waves over the complicated bathymetry. The diffraction effect in the wave model is derived from a parabolic approximation of wave theory, and the mean energy dissipation rate per unit horizontal area due to wave breaking is parameterized by the bore-based formulation with a breaker index of 0.73. The numerically simulated wave field without considering coastal currents is different from that of experiments, whereas model results considering currents clearly reproduce the intensification of wave height in front of concave shorelines.
基金supported by China State Key Science and Technology Project on Marine Carbonate Reservoir Characterization (No. 2008ZX05004-006)
文摘Frequency domain wave equation forward modeling is a problem of solving large scale linear sparse systems which is often subject to the limits of computational efficiency and memory storage. Conventional Gaussian elimination cannot resolve the parallel computation of huge data. Therefore, we use the Gaussian elimination with static pivoting （GESP） method for sparse matrix decomposition and multi-source finite-difference modeling. The GESP method does not only improve the computational efficiency but also benefit the distributed parallel computation of matrix decomposition within a single frequency point. We test the proposed method using the classic Marmousi model. Both the single-frequency wave field and time domain seismic section show that the proposed method improves the simulation accuracy and computational efficiency and saves and makes full use of memory. This method can lay the basis for waveform inversion.
基金supported by the Australian Research Council (Grant No. DE130100457)
文摘In this paper, the ability of the distinct lattice spring model （DLSM） for modeling stress wave propagation in rocks was fully investigated. The influence of particle size on simulation of different types of stress waves （e.g. one-dimensional （1D） P-wave, 1D S-wave and two-dimensional （2D） cylindrical wave） was studied through comparing results predicted by the DLSM with different mesh ratios （It） and those obtained from the corresponding analytical solutions. Suggested values of lr were obtained for modeling these stress waves accurately. Moreover, the weak material layer method and virtual joint plane method were used to model P-wave and S-wave propagating through a single discontinuity. The results were compared with the classical analytical solutions, indicating that the virtual joint plane method can give better results and is recommended. Finally, some remarks of the DLSM on modeling of stress wave propagation in rocks were provided.
基金US Army Research and Development Center (EROC), Coastal Inlet Research Program (CIRP),Vicksbarg, MS, USA.
文摘A local-scale phase-resolving wave transformation model with CGWAVE is established in connection with a regional-scale coupled STWAVE-ADCIRC wave-current model for its application in the Half Moon Bay, Grays Harbor.Wave transformation from offshore to the harbor entrance is simulated by the STWAVE model which includes wave-current interaction.The STWAVE results provide incident wave conditions for the local-scale CGWAVE model at its outer boundary. A simple method is developed to take into account the lateral variation of wave height in constructing the model’s wave boundary conditions.The model was validated for three wave condition cases which yielded good agreement with field data.The validated model was applied to predicting nearshore waves in the Half Moon Bay and longshore transport parameters along the wave breaking line for the existing condition and three engineering alternatives. A comparative analysis indicated that storm waves that have a combination of long period and large height are the most destructive to the crenulate shoreline in the Half Moon Bay; both 152 m jetty extension (Alt. 2) and diffraction mound enlargement (Alt. 3) would significantly reduce breaking wave height and longshore transport potential in the southwest corner of Half Moon Bay.
文摘This paper provides an overview of the global wave resource for energy exploration.The most popular metrics and estimators for wave energy resource characterization have been compiled and classified by levels of energy exploration.A review of existing prospective wave energy resource assessments worldwide is also given,and those studies have been collated and classified by continent.Finally,information about forty existing open sea wave energy test sites worldwide and their characteristics is depicted and displayed on a newly created global map.It has been found that wave power density is still the most consensual metric used for wave energy resource assessment purposes among researchers.Nonetheless,to accomplish a comprehensive wave resource assessment for exploitation,the computation of other metrics at the practicable,technical,and socio-economic levels has also been performed at both spatial and temporal domains.Overall,regions in latitudes between 40°and 60°of both hemispheres are those where the highest wave power density is concentrated.Some areas where the most significant wave power density occurs are in offshore regions of southern Australia,New Zealand,South Africa,Chile,the British Isles,Iceland,and Greenland.However,Europe has been the continent where most research efforts have been done targeting wave energy characterisation for exploitation.
基金Sponsored by the Basic Research of National Defense(2220061084)
文摘In order to realize real-time simulation of ocean surface near the seashore, a new modeling method for shallow ocean wave and a level of detail （LOD） scheme are proposed in this paper. This modeling method describes ocean wave by modifying the sine wave, and gets wave direction at any ocean floor position by using wave number decomposition. The LOD scheme is proposed to realize real-time rendering of large-scale ocean surface by simplifying the ocean surface regular mesh based on real-time optimally adapting meshes （ROAM）. Experimental results show that this method can get fast rendering speed and realistic effect.
基金supported by the Natural Environment Research Council as part of a PhD studentship(Grant No.EGF406)
文摘This paper describes an investigation of the generation of desired sea states in a numerical wave model. Bimodal sea states containing energetic swell components can be coastal hazards along coastlines exposed to large oceanic fetches. Investigating the effects of long-period bimodal seas requires large computational domains and increased running time to ensure the development of the desired sea state. Long computational runs can cause mass stability issues due to the Stokes drift and wave reflection, which in turn affect results through the variation of the water level. A numerical wave flume, NEWRANS, was used to investigate two wave generation methods： the wave paddle method, allowing for a smaller domain; and the internal mass source function method, providing an open boundary allowing reflected waves to leave the domain. The two wave generation methods were validated against experimental data by comparing the wave generation accuracy and the variance of mass in the model during simulations. Results show that the wave paddle method not only accurately generates the desired sea state but also provides a more stable simulation, in which mass fluctuation has less of an effect on the water depth during the long-duration simulations. As a result, it is suggested that the wave paddle method with active wave absorption is preferable to the internal wave maker option when investigating intermediate-depth long-period bimodal seas for long-duration simulations.
基金supported by the European Commission within FP7-THEME 6(Grant No.244104)the Natural Environment Research Council(NERC)of the UK(Grant No.NE/J005541/1)the Ministry of Science and Technology(MOST)of Taiwan(Grant No.MOST 104-2221-E-006-183)
文摘Accurately forecasting ocean waves during typhoon events is extremely important in aiding the mitigation and minimization of their potential damage to the coastal infrastructure, and the protection of coastal communities. However, due to the complex hydrological and meteorological interaction and uncertainties arising from different modeling systems, quantifying the uncertainties and improving the forecasting accuracy of modeled typhoon-induced waves remain challenging. This paper presents a practical approach to optimizing model-ensemble wave heights in an attempt to improve the accuracy of real-time typhoon wave forecasting. A locally weighted learning algorithm is used to obtain the weights for the wave heights computed by the WAVEWATCH III wave model driven by winds from four different weather models （model-ensembles）. The optimized weights are subsequently used to calculate the resulting wave heights from the model-ensembles. The results show that the opti- mization is capable of capturing the different behavioral effects of the different weather models on wave generation. Comparison with the measurements at the selected wave buoy locations shows that the optimized weights, obtained through a training process, can significantly improve the accuracy of the forecasted wave heights over the standard mean values, particularly for typhoon-induced peak waves. The results also indicate that the algorithm is easy to imnlement and practieal for real-time wave forecasting.
文摘In the last two decades,the exploitation of marine renewable energies(70%of the globe is made up of oceans),especially wave energy,has attracted great interest,not only for their high potential,but also for their high energy density.The development of wave energy is suitable for countries or regions with extensive coastline and high waves approaching the shore.This paper focuses on the study of wave potential and wave energy distribution in the Casablanca-Mohammedia nearshore area(Moroccan Atlantic coast)in order to identify prospective wave energy hotspots.To achieve this purpose,the offshore wave potential was firstly estimated from a 20 years wave data provided by ECMWF(European Center for Medium range Weather Forecasts).In the second step,a numerical modeling of the wave propagation in the study area was performed using the SWAN model jointly with WAVEWATCHIII.The performance of the model to simulate accurately the wave field was evaluated in a real situation characterized by large waves.The model then was applied to determine the patterns of wave field in the Casablanca-Mohammedia nearshore area for a typical wave conditions(winter,summer and storm).The results of this study show the abundance of wave energy in the region with an average annual wave potential of about 22 kW/m.A seasonal variability of the wave resource was demonstrated,with values five times higher in winter than in summer.In addition,a major hotspot site was identified that should be considered when studyingWEC implementation.This hotspot is located at the southern edge of the Casablanca-Mohammedia coast,near the coastal area of Sidi Rahal.
基金Supported by the National Science Fund for Distinguished Young Scholars (No 40425015)the Knowledge Innovation Programs of the Chinese Academy of Sciences (Nos KZCX1-YW-12 and KZCX2-YW-201)
文摘Fractional energy losses of waves due to wave breaking when passing over a submerged bar are studied systematically using a modified numerical code that is based on the high-order Boussinesq-type equations.The model is first tested by the additional experimental data,and the model's capability of simulating the wave transformation over both gentle slope and steep slope is demonstrated.Then,the model's breaking index is replaced and tested.The new breaking index,which is optimized from the several breaking indices,is not sensitive to the spatial grid length and includes the bottom slopes.Numerical tests show that the modified model with the new breaking index is more stable and efficient for the shallow-water wave breaking.Finally,the modified model is used to study the fractional energy losses for the regular waves propagating and breaking over a submerged bar.Our results have revealed that how the nonlinearity and the dispersion of the incident waves as well as the dimensionless bar height(normalized by water depth) dominate the fractional energy losses.It is also found that the bar slope(limited to gentle slopes that less than 1:10) and the dimensionless bar length(normalized by incident wave length) have negligible effects on the fractional energy losses.
文摘In previous studies, an isosceles triangular-type possibility distribution was employed to represent the analog waves of a Gaussian Process. The model was then projected onto actual waves using Zadeh’s extension principle of mapping (Hori et al., 2019). Furthermore, by applying Vague Set and Systems theory, it was shown that the actual waves followed a Gaussian process, and that the system could be efficiently controlled via Monte Carlo simulation. However, due to the use of fuzzy OR logic in the extension principle of mapping and wave synthesis, the resulting ambiguity increased significantly. To address this issue, a Possibility Markov Chain was proposed, incorporating possibility theory to mitigate the explosion of ambiguity. In this study, we propose a novel modeling approach that utilizes a possibility transition matrix without relying on fuzzy OR logic. Additionally, we introduce the Sea-Control Algorithm, which artificially introduces system error into the system function, thereby enabling modification of the possibility transition matrix through the deliberate manipulation of possibility information within the fuzzy system.
文摘The LAGFD-WAM wave model is a third generation wave model. In the present paper the physical aspect of the model was shown in great detail including energy spectrum balance equation, complicated characteristics equations and source functions.
文摘In this paper the parameterizational approach of nonlinear source function and the implicit scheme of the model are discussed in detail. The matching problem is solved between time and space steps using the characteristics inlaid scheme with very strong physical meaning. The computational comparison in typical winds shows some improvements to the WAM model. That the hindcast results of the model for typhoon cases are in good agreement with real data illustrates its applicability to wave forecast and engineering study.
文摘The authors make an endeavor to explain why a new hybrid wave model is here proposed when several such models have already been in operation and the so- called third generation wave modej is proving attractive. This part of the paper is devoted to the wind wave model. Both deep and shallow water models have been developed, the former being actually a special case of the latter when water depth is great. The deep water model is exceptionally simple in form. Significant wave height is the only prognostic variable. In comparison with the usual methods to compute the energy input and dissipations empirically or by 'tuning', the proposed model has the merit that the effects of all source terms are combined into one term which is computed through empirical growth relations for significant waves, these relations being, relatively speaking, easier and more reliable to obtain than those for the source terms in the spectral energy balance equation. The discrete part of the model and the implementation of the model as a whole will be discussed in the second part of the present paper.
基金This study was supported by the National Key Basic Research Project of China (Grant No2002CB412403)the Research Project in Science and Technology Commission of Shanghai Municipality,China (Grant No04DZ12049)
文摘New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions. Experimental data collected in the wave basin of the University of Delaware were used to test its performance. Wave heights were compared in the four cases （with different wave energies and directional spreading spectra）. The results agreed well with the measurements, especially for the broad directional spectra cases. The effect of wave diffraction was analyzed by switching on/off the corresponding tenn. By introducing the diffraction term, the distributions of wave height and wave direction were smoothed, especially obvious for the narrow spectrum cases. Compared with the calculations without diffraction, the model with diffraction effect gave better results.
文摘One of the new methods for powering low-power electronic devices at sea is a wave energy harvesting system. In this method, piezoelectric material is employed to convert the mechanical energy of sea waves into electrical energy. The advantage of this method is based on avoiding a battery charging system. Studies have been done on energy harvesting from sea waves, however, considering energy harvesting with random JONSWAP wave theory, then determining the optimum values of energy harvested is new. This paper does that by implementing the JONSWAP wave model, calculating produced power, and realistically showing that output power is decreased in comparison with the more simple Airy wave model. In addition, parameters of the energy harvester system are optimized using a simulated annealing algorithm, yielding increased produced power.
文摘Reasonably accurate predictions of wave heights, current and elevations during storm events are vital information for marine operations and design of offshore and coastal structures in the surrounding seas of Korea Peninsula. Ocean circulation and wind-wave models have traditionally been run separately, but recent researches have identified potentially important interactions between current and wave motions. The coupled tide-surge and the WAM wave models at the atmospheric boundary layer and bottom boundary layer around the Korea Peninsula are applied for the Typhoon Maemi （0314） event. Communication between the models is aehievod using MPI. Results are compared with coastal tide gauges and moored wave buoys and comparisons are also made between wave computations from the coupled model and the independent third generation wave models. Results suggest that applying the fide-surge-coupled model can be an effective means of obtaining wave and storm surge predictions simultaneously.
