Separating oil/water mixtures via superhydrophobic stainless steel mesh(SSM)is a kind of efficient methods of treating oily wastewater,and the superhydrophobic SSM with a low cost,simple fabrication process and robust...Separating oil/water mixtures via superhydrophobic stainless steel mesh(SSM)is a kind of efficient methods of treating oily wastewater,and the superhydrophobic SSM with a low cost,simple fabrication process and robust usability remains a challenge.Herein,urushiol-based benzoxazine(U-D)with a strong substrate adhesion and low surface free energy was used to anchor SiO_(2) particles on the SSM surface to obtain a durable superhydrophobic SSM(PU-D/SiO_(2)/SSM)through a simple dip-coating process,meanwhile,epoxy resin was also introduced to further improve the adhesion between coating and SSM.PU-D/SiO_(2)/SSM could successfully separate various immiscible oil-water mixtures with a separation efficiency of over 96%and a flux up to 27100 L/m^(2) h only by gravity,respectively.Especially,the modified SSM could effectively remove water from water-in-oil emulsion with a separation efficiency of 99.7%.Moreover,PU-D/SiO_(2)/SSM had an outstanding reusability,whose water contact angle and separation efficiency only slightly decreased after 20 cycles of separating oil/water mixture.In addition,the modified SSM also displayed a satisfactory abrasion resistance,chemical stability and self-cleaning property.Thereby,the robust PU-D/SiO_(2)/SSM prepared by cheap raw materials and facile dip-coating method exhibits a high potential for separating oil/water mixtures.展开更多
Functional superhydrophobic coatings have attracted considerable attention because of their potential for a wide range of applications.In this study,a novel cyclotetrasiloxane-based hybrid superhydrophobic modifier(F-...Functional superhydrophobic coatings have attracted considerable attention because of their potential for a wide range of applications.In this study,a novel cyclotetrasiloxane-based hybrid superhydrophobic modifier(F-D_(4))was prepared for the first time using a mild thiolene click reaction of 2,4,6,8-tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane(Vi-D_(4))with perfluorohexylethanethiol(PFOT)and mercaptopropyltrimethoxysilane(MPTMS)as the raw materials.Then,F-D_(4) was introduced into the fabric via a sol-gel process,resulting in a superhydrophobic fabric(F-D_(4)-Fabric).The surface characteristics of the modified fabric were determined using scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and water contact angle(WCA).The coated fabrics have outstanding mechanical,physical,and chemical stability,and exhibit excellent self-cleaning and anti-fouling properties.Owing to its superhydrophobicity,FD_(4)-Fabric could efficiently separate a range of oil/water mixtures with a separation efficiency of up to 99.99%.The study showed that the modification strategy used in the dip-coating process greatly affected the superhydrophobicity of the cotton fabric,which is useful for oil/water separation and self-cleaning applications.展开更多
Extracting ethanol from aqueous solutions is important but challenging in industry.Pervaporation membranes show great promise for separating ethanol from water,with the design of their structure being crucial for enha...Extracting ethanol from aqueous solutions is important but challenging in industry.Pervaporation membranes show great promise for separating ethanol from water,with the design of their structure being crucial for enhancing performance.In this study,we developed an oriented bimetallic metal-organic framework(MOF)membrane,designated as ZIF-CoZn,for the pervaporation separation of ethanol from water.During crystal growth,bimetallic salts provide specific nucleation sites,and the competitive coordination between Co and Zn ions shifts the energetically favorable(100)plane to the(211)plane.This orientation enables precise molecular-level control over hydrophobic ligand arrangement,effectively repelling water molecules.Meanwhile,bimetallic competition enlarges pore sizes,facilitating ethanol permeation.When compared to single-metal MOF membranes made of cobalt or zinc,the separation factor of the ZIF-CoZn membrane for ethanol/water mixtures increased by 127%and 160%,respectively.Benefiting from the high roughness and increased exposure of hydrophobic ligands due to the preferential(211)orientation,ZIF-CoZn exhibits superhydrophobicity after vinyl-polydimethylsiloxane coating.The oriented ZIF-CoZn membrane was also scaled up to an area of 1 m^(2).This work provides valuable insights into optimizing MOF membrane structure and lays the foundation for its promotion and application in the industry.展开更多
Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functio...Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane （FGP） sponge by a simple and inexpensive dip coating method. The resulting FGP sponge was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and water contact angle. The results expressed that FGP sponge exhibited a similar surface structure to that of a lotus leaf, and possessed the super-hydrophobic characteristic with the water contact angle （WAC） of 152°± 1 °. The absorption capacity and reusability were also investigated. It can be seen that, the FGP sponge can remove a wide range of oils and organic solvents from water with good absorption capacities （up to 35 times of its own mass）. Significantly, after 10 cycles the absorption capacity of the oils and organic solvents was higher than 90°; for the reused FGP sponge, demonstrating the good reusability of the FGP sponge. Therefore, this study probably provided a simole way to remove the pollutions ofoil spills and toxic organism from water.展开更多
Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to trea...Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned.The focal research reports a completely biodegradable all cellulose composite filter paper(ACCFP) composed of Ⅰ-cellulose macrofibers and Ⅱ-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper(PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of Ⅱ-cellulose hydrogel and Ⅰ-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water(oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.展开更多
The membrane method based on adaptive wettability shows great advantages in oil-water separation.At present,researches focus on the excellent application performance of the membrane material,while the quantitative ana...The membrane method based on adaptive wettability shows great advantages in oil-water separation.At present,researches focus on the excellent application performance of the membrane material,while the quantitative analysis of interactions in oil-water separation is rarely recognized.Herein,we constructed an adaptable wettability membrane with multiple polymer networks by polydopamine(PDA)and mussel-inspired amphiphilic polymer.Based on the Owens three-probe liquid method,the surface energy of the modified membrane was verified to meet the adaptive wettability conditions,with surface energies(γ-8)of 147.6 mJ m^(−2)(superhydrophilic/underwater superoleophobic)and 49.87 mJ m^(−2)(superhydrophobic/superoleophobic),respectively.The adhesion or repulsion of the membrane to the oil phase under different conditions during the separation process was quantified by the chemical probe AFM technique.In addition,the oil-water selective separation mechanism was further analyzed in a simplified membrane microchannel model.The results show that the different wetting produces capillary additional pressure in opposite directions,resulting in different energies to be overcome when the oil or water passes through the microchannels,thus achieving selective separation.展开更多
In this work,a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh.The as-fabricated copper mesh displayed promin...In this work,a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh.The as-fabricated copper mesh displayed prominent superoleophilicity and superhydrophobicity with a huge water contact angle about 154.39°and oil contact angle near 0°Moreover,the coated copper mesh showed high separation efficiency approximately 99.3%,and huge water flux about 9962.3 L·h^-1·m-2,which could be used to separate various organic solvents/water mixtures.Furthermore,the coated copper mesh showed favorable stability that the separation efficiency remained above 90%after 10 separation cycles.Benefiting from the excellent photocatalytic degradation ability of tungsten trioxide,the coated copper mesh possessed the self-cleaning capacity.Therefore,the mesh contaminated with lubricating oil could regain superhydrophobic property,and this property of self-cleaning permitted that the fabricated copper mesh could be repeatedly used for oil and water separation.展开更多
This paper presents a superhydrophobic melamine(ME)sponge(ME-g-PLMA)prepared via high-energy radiation-induced in situ covalent grafting of long-alkyl-chain dodecyl methacrylate(LMA)onto an ME sponge for efficient oil...This paper presents a superhydrophobic melamine(ME)sponge(ME-g-PLMA)prepared via high-energy radiation-induced in situ covalent grafting of long-alkyl-chain dodecyl methacrylate(LMA)onto an ME sponge for efficient oil–water separation.The obtained ME-g-PLMA sponge had an excellent pore structure with superhydrophobic(water contact angle of 154°)and superoleophilic properties.It can absorb various types of oils up to 66–168 times its mass.The ME-g-PLMA sponge can continuously separate oil slicks in water by connecting a pump or separating oil underwater with a gravity-driven device.In addition,it maintained its highly hydrophobic properties even after long-term immersion in different corrosive solutions and repeated oil adsorption.The modified ME-g-PLMA sponge exhibited excellent separation properties and potential for oil spill cleanup.展开更多
Surface deposition based on metal-phenolic networks(MPNs) has received increasing interest in recent years. The catechol structure is generally considered to be essential to the formation of MPNs. Our most recent resu...Surface deposition based on metal-phenolic networks(MPNs) has received increasing interest in recent years. The catechol structure is generally considered to be essential to the formation of MPNs. Our most recent results have demonstrated that some kinds of monophenols can form MPNs on substrate surfaces.Herein, we report a fast and effective surface-coating system based on the coordination of 3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid, a kind of monophenol, with Fe^(3+). Compared with other metal ions such as Cu^(2+)and Ni^(2+), Fe^(3+)with stronger electron acceptability can coordinate with the monophenol more strongly to form MPNs, and moreover, the deposition time significantly decreases to 40 min from generally 24 h. It is demonstrated that the deposition process is controlled by the coordination, Fe^(3+)hydrolysis, and deprotonation of the monophenol. The coatings endow substrates such as polypropylene microfiltration membrane with underwater superoleophobicity, which can be applied in oil/water separation with high separation efficiency and great long-term stability. In addition, the coated membranes are positively charged and thus are useful in selective adsorption of dyes. The present work not only provides a novel, fast, and one-step deposition method to fabricate MPNs, but also demonstrates that the fabrication efficiency of monophenol-based MPNs is comparable with that of polyphenol-based MPNs.展开更多
In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modific...In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modification with n-dodecyl mercaptan(DDT). This method provides a new strategy to fabricate superhydrophobic PU sponge with a water contact angle of 157° for absorbing oil with low cost and in large scale. It exhibits the strong absorption capacity and highly selective characteristic for various kinds of oils which can be recycled by simple squeezing. Besides, the as-prepared sponge can deal with the floating and underwater oils, indicating its application value in handling oil spills and domestic oily wastewater. The good self-cleaning ability shows the potential to clear the pollutants due to the ultralow adhesion to water. Especially, the most important point is that the superhydrophobic sponge can continuously and effectively separate the oil/water mixture against the condition of turbulent disturbance by using our designed device system, which exhibit its good superhydrophobicity, strong stability.Furthermore, the SS-PU still maintained stable absorption performance after 150 cycle tests without losing capacity obviously, showing excellent durability in long-term operation and significant potential as an efficient absorbent in large-scale dispose of oily water.展开更多
It is of great necessity yet still a challenge to develop superwetting functional interfacial materials for simultaneously separating insoluble oil and degrading soluble dye pollutants in practical wastewater.In this ...It is of great necessity yet still a challenge to develop superwetting functional interfacial materials for simultaneously separating insoluble oil and degrading soluble dye pollutants in practical wastewater.In this work,a Ag-CuO heterostructure-decorated mesh was fabricated via facile alkali etchingcalcination and photoreduction approaches.The as-synthesized mesh with superhydrophilicity and underwater superoleophobicity displayed high separation efficiency(>99.998%)for diverse oil/water mixtures.Besides,it demonstrated more superior photocatalytic performance in dye degradation than those of bare CuO nanostructure-coated materials,which is primarily attributed to the intensive visible light harvesting and efficient electron-holes separation occurred on noble metal-semiconductor heterostructures.Furthermore,on account of the tenacity of Cu substrate as well as enhanced structural stability,this binary composite-decorated mesh exhibited highly reliable durability and robustness after 10 cycles of photocatalytic degradation tests,and even being ultrasonic worn for 30 min.More importantly,our developed mesh was capable of in situ catalytic degrading water-soluble organic dyes during oil/water separation under visible light irradiation.Therefore,such a dexterous and feasible strategy may afford a new route to construct bifunctional and predurable materials for actual sewage purification.展开更多
The oil/water separation in a liquid-liquid cylindrical cyclone is experimentally studied in this article.The effects of the flow split-ratio and the flow rate on the oil/water separation performance are determined.Fr...The oil/water separation in a liquid-liquid cylindrical cyclone is experimentally studied in this article.The effects of the flow split-ratio and the flow rate on the oil/water separation performance are determined.From the experimental results,it is shown that with the increase of the flow split-ratio,the oil/water separation efficiency is enhanced at first,and an optimal flow split-ratio exists,beyond that optimal split-ratio,the watercut in the underflow keeps constant,while the oil content in the overflow begins to decrease.The process of the oil core structure formation and the phase distribution in the cyclone are determined by numerical simulations.Furthermore,the dependence of the separation efficiency on the Reynolds number and the flow split-ratio is investigated based on a dimensional analysis.A comparison between the predicted values and the experimental data shows a good agreement.展开更多
The frequent occurrence of crude oil leakage accidents and the massive discharge of industrial oily wastewater not only caused huge damage and pollution to the ecosystem but also wasted a lot of precious resources.The...The frequent occurrence of crude oil leakage accidents and the massive discharge of industrial oily wastewater not only caused huge damage and pollution to the ecosystem but also wasted a lot of precious resources.Therefore,it is urgent to solve the worldwide problem of oil/water separation.As a leader in advanced fiber materials,nanofibrous materials prepared by electrospinning have the advantages of high permeability,high separation efficiency,large specific surface area,adjustable wettability,simple preparation process,and low cost,making it attracted more attention of researchers in oil/water separation.This article mainly reviews the recent progress of various electrospun nanofibrous materials for oil/water separation field.The preparation and synthesis of nanofibrous adsorbents,nanofibrous membranes,and nanofibrous aerogels in recent years based on different applications,design principles,and separation approaches are systematically summarized.Finally,this review discusses the challenges and future development directions in oil/water separation.展开更多
Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water （O/W） mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., ...Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water （O/W） mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., a porous ceramic membrane substrate, a polyvinylidene fluoride （PVDF） ultrafiltration sub-layer, and a polyamide/polyvinyl alcohol （PVA） composite thin top-layer. The PVDF polymer was east onto the tubular porous ceramic membranes with an immersion precipitation method, and the polyamide/PVA composite thin top-layer was fabricated with an inteffaeial polymerization method. The effects of the sub-layer composition and the recipe in the inteffaeial polymerization for fabricating the top-layer on the structure and performance of composite membranes were systematically investigated. The prepared composite membranes showed a good performance for treating the O/W microemulsions with a mean diameter of about 2.41μm. At the operating pressure of 0.4MPa, the hydraulic permeability remained steadily about 190L·m^-2·h^-1, the oil concentration in the permeate was less than 1.6mg·L^-1, and the oil rejection coefficient was always higher than 98.5% throughout the operation from the beginning.展开更多
Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvent...Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvents in the membrane manufacturing process.Therefore,interest in the development of a new eco-friendly oil-water separation membrane that does not cause secondary pollution and exhibits selective wettability characteristics in water or oil is increasing.The biopolymeric nanofibrous membranes inspired by fish skin can provide specific underwater oleophobicity,which is effective for excellent oil-water separation efficiency and prevention of secondary contamination.Fish gelatin,which is highly soluble in water and has a low gelation temperature,can be electrospun in an aqueous solution and has the same polar functional groups as the hydrophilic mucilage of fish skin.In addition,the micro/nanostructure of fish skin,which induces superoleophobicity in water,introduces a bead-on-string structure using the Rayleigh instability of electrospinning.The solubility of fish gelatin in water was removed using an eco-friendly crosslinking method using reducing sugars.Fish skin-mimicking materials successfully separated suspended oil and emulsified oil,with a maximum flux of 2086 Lm^(−2) h^(−1) and a separation efficiency of more than 99%.The proposed biopolymeric nanofibrous membranes use fish gelatin,which can be extracted from fish waste and has excellent biodegradability with excellent oil-water separation performance.In addition,polymer material processing,including membrane manufacturing and crosslinking,can be realized through eco-friendly processes.Therefore,fish skin-inspired biopolymeric membrane is expected to be a promising candidate for a sustainable and effective oil-water separation membrane in the future.展开更多
Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively se...Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively separated oil–water emulsion as it was hydrophobic underwater.But its separation efficiencies(SEs)first increased to 98.9%,then dropped to 97.6%in 10 min because of oil-fouling.To tackle this problem,FM deposited with 0%–10%silica nanoparticle(NPsFMs),then coated by fluorocarbon polymer(X-[CH_(2)CH_(2)O]nCH_(2)CH_(2)O-Y-NH-COOCH_(2)C4F9)(FCNPs FMs),was used to enhance its roughness and regulate its initial wettability to improve the anti-fouling property.FCFM and FCNPs FMs were hydrophobic and oleophobic in air and oleophobic underwater.Their water contact angles,oil contact angles and oil contact angles were 115.3°–121.1°,128.8°–136.5°,and 131.6°–136.7°,respectively,meeting the requirement of 90°–140°for coalescence separation.FCNPs FM-5 had the best separation performance with a constant value of 99.8%in 10 min,while that of FCNPs FM-10 slightly decreased to 99.5%.Theoretical released droplet(TRD)diameter,calculated by the square root of the product of pore radius and fiber diameter,was used for the evaluation of coalescence performance.Analyzed by two ideal models,TRD diameter and fiber diameter showed a parabola type relationship,proving that the separation efficiency was a collaborative work of wettability,pore size and fiber diameter.Also,it explained the SEs reduction from FCNPs FM-5 to FCNPs FM-10 was revelent to the three parameters.Moreover,FCNPsFMs effectively separated emulsions stabilized by cationic surfactant CTAB(SEs:97.3%–98.4%)and anionic surfactant SDBS(SEs:91.3%–93.4%).But they had an adverse effect on nonionic surfactant Tween-80 emulsion separation(SEs:94.0%–71.76%).Emulsions made by diverse oils can be effectively separated:octane(SEs:99.4%–100%),rapeseed oil(SEs:97.3%–98.8%),and diesel(SEs:95.2%–97.0%).These findings provide new insights for designing novel materials for oil–water separation by coalescence mechanism.展开更多
Superwetting surfaces have the potential to address oil pollution in water,through their ability to separate the two.However,it remains a great challenge to fabricate stable and efficient separation structures using c...Superwetting surfaces have the potential to address oil pollution in water,through their ability to separate the two.However,it remains a great challenge to fabricate stable and efficient separation structures using conventional manufacturing techniques.Furthermore,the materials traditionally used for oil-water separation are not stable at high temperature.Therefore,there is a need to develop stable,customizable structures to improve the performance of oil-water separation devices.In recent years,3D printing technology has developed rapidly,and breakthroughs have been made in the fabrication of complicated ceramic structures using this technology.Here,a ceramic material with a gradient pore structure and superhydrophobic/superoleophilic properties was prepared using 3D printing for high-efficiency oil-water separation.The gradient pore structure developed here can support a flux of up to 25434 L/m^(2)h,which is nearly 40%higher than that an analogous structure with straight pores.At 200℃,the oil-water separation performance was maintained at 97.4%.Furthermore,samples of the material exhibited outstanding mechanical properties,and chemical stability in a variety of harsh environments.This study provides an efficient,simple,and reliable method for manufacturing oil-water separation materials using 3D printing,and may have broader implications for both fundamental research and industrial applications.展开更多
Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of ...Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.展开更多
Stimuli-responsive materials with switchable wettability have promising practical applications in oil/water separation.A novel CO_(2)-responsive cotton fabric for controlled oil/water separation was fabricated based o...Stimuli-responsive materials with switchable wettability have promising practical applications in oil/water separation.A novel CO_(2)-responsive cotton fabric for controlled oil/water separation was fabricated based on mussel-inspired reaction and polymerized with 2-(dimethylamino)ethyl methacrylate(DMAEMA).As expected,the modified fabric exhibited switchable hydrophilicity and hydrophobicity after CO_(2)/N_(2)alternation,and it could be used for gravity-driven CO_(2)-controlled oil/water separation.Water was selectively penetrated through the fabric and separated from oil after treating by CO_(2).A reversed wettability could be generated through simply treated with N2.It is expected that the as-prepared fabrics could be applied in smart oil/water separation due to the attractive properties of CO_(2)-switchable system.展开更多
In recent years,numerous studies have been reported for oil/water separation,such as superoleophilic materials for oil absorption and underwater superoleophobic membranes for continuous separation.However,for the reco...In recent years,numerous studies have been reported for oil/water separation,such as superoleophilic materials for oil absorption and underwater superoleophobic membranes for continuous separation.However,for the recovery of oil slick pollution on near-shore ocean surface caused by various reasons,large area and fast availability of used materials are needed to be considered.Herein,we report an efficient and environmentally friendly method to fast process nylon mesh by surface diffuse atmospheric plasma(SDAP)for large-area oil/water separation.Nylon mesh is funcionalized by atmospheric plasma to generate micro/nano composite structures on the surface,resulting in superhydrophilicity and underwater superoleophobicity within only seconds.The pre-wetted modified nylon mesh can achieve high efficiency(>99.9%)and circulating water flux(~30,000 L·m^(-2)·h^(-1)),with high intrusion pressure(~3 kPa)and universality in oil/water separation.Regular plasma unconditionally generated in the atmosphere with the merit of efficiently functionalizing surface has the potential of large-area materials treatment.This study might take one step further for large-area industrial oily wastewater recovery and even oil slicks collection in near-shore water bodies.展开更多
基金Funded by the National Natural Science Foundation of China(No.22165019)。
文摘Separating oil/water mixtures via superhydrophobic stainless steel mesh(SSM)is a kind of efficient methods of treating oily wastewater,and the superhydrophobic SSM with a low cost,simple fabrication process and robust usability remains a challenge.Herein,urushiol-based benzoxazine(U-D)with a strong substrate adhesion and low surface free energy was used to anchor SiO_(2) particles on the SSM surface to obtain a durable superhydrophobic SSM(PU-D/SiO_(2)/SSM)through a simple dip-coating process,meanwhile,epoxy resin was also introduced to further improve the adhesion between coating and SSM.PU-D/SiO_(2)/SSM could successfully separate various immiscible oil-water mixtures with a separation efficiency of over 96%and a flux up to 27100 L/m^(2) h only by gravity,respectively.Especially,the modified SSM could effectively remove water from water-in-oil emulsion with a separation efficiency of 99.7%.Moreover,PU-D/SiO_(2)/SSM had an outstanding reusability,whose water contact angle and separation efficiency only slightly decreased after 20 cycles of separating oil/water mixture.In addition,the modified SSM also displayed a satisfactory abrasion resistance,chemical stability and self-cleaning property.Thereby,the robust PU-D/SiO_(2)/SSM prepared by cheap raw materials and facile dip-coating method exhibits a high potential for separating oil/water mixtures.
基金financially supported by the National Key R&D Program of China(No.2022YFE0197000)。
文摘Functional superhydrophobic coatings have attracted considerable attention because of their potential for a wide range of applications.In this study,a novel cyclotetrasiloxane-based hybrid superhydrophobic modifier(F-D_(4))was prepared for the first time using a mild thiolene click reaction of 2,4,6,8-tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane(Vi-D_(4))with perfluorohexylethanethiol(PFOT)and mercaptopropyltrimethoxysilane(MPTMS)as the raw materials.Then,F-D_(4) was introduced into the fabric via a sol-gel process,resulting in a superhydrophobic fabric(F-D_(4)-Fabric).The surface characteristics of the modified fabric were determined using scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and water contact angle(WCA).The coated fabrics have outstanding mechanical,physical,and chemical stability,and exhibit excellent self-cleaning and anti-fouling properties.Owing to its superhydrophobicity,FD_(4)-Fabric could efficiently separate a range of oil/water mixtures with a separation efficiency of up to 99.99%.The study showed that the modification strategy used in the dip-coating process greatly affected the superhydrophobicity of the cotton fabric,which is useful for oil/water separation and self-cleaning applications.
基金the funding from the National Key Research and Development Program of China(No.2022YFB3804802)the National Natural Science Foundation of China(22125801,22478012)Beijing Natural Science Foundation(Z230023)。
文摘Extracting ethanol from aqueous solutions is important but challenging in industry.Pervaporation membranes show great promise for separating ethanol from water,with the design of their structure being crucial for enhancing performance.In this study,we developed an oriented bimetallic metal-organic framework(MOF)membrane,designated as ZIF-CoZn,for the pervaporation separation of ethanol from water.During crystal growth,bimetallic salts provide specific nucleation sites,and the competitive coordination between Co and Zn ions shifts the energetically favorable(100)plane to the(211)plane.This orientation enables precise molecular-level control over hydrophobic ligand arrangement,effectively repelling water molecules.Meanwhile,bimetallic competition enlarges pore sizes,facilitating ethanol permeation.When compared to single-metal MOF membranes made of cobalt or zinc,the separation factor of the ZIF-CoZn membrane for ethanol/water mixtures increased by 127%and 160%,respectively.Benefiting from the high roughness and increased exposure of hydrophobic ligands due to the preferential(211)orientation,ZIF-CoZn exhibits superhydrophobicity after vinyl-polydimethylsiloxane coating.The oriented ZIF-CoZn membrane was also scaled up to an area of 1 m^(2).This work provides valuable insights into optimizing MOF membrane structure and lays the foundation for its promotion and application in the industry.
基金Supported by the National Natural Science Foundation of China(21776319)
文摘Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane （FGP） sponge by a simple and inexpensive dip coating method. The resulting FGP sponge was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and water contact angle. The results expressed that FGP sponge exhibited a similar surface structure to that of a lotus leaf, and possessed the super-hydrophobic characteristic with the water contact angle （WAC） of 152°± 1 °. The absorption capacity and reusability were also investigated. It can be seen that, the FGP sponge can remove a wide range of oils and organic solvents from water with good absorption capacities （up to 35 times of its own mass）. Significantly, after 10 cycles the absorption capacity of the oils and organic solvents was higher than 90°; for the reused FGP sponge, demonstrating the good reusability of the FGP sponge. Therefore, this study probably provided a simole way to remove the pollutions ofoil spills and toxic organism from water.
基金the financial support from the National Key R&D Program of China (no. 2018YFB1501602)Science Foundation of Shanxi Province, China (Grant no. 201901D111006ZD)+1 种基金Fund for Shanxi “1331 project”Shanxi Province Platform Base and Talent Special Fund (no. 201705D211023)。
文摘Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned.The focal research reports a completely biodegradable all cellulose composite filter paper(ACCFP) composed of Ⅰ-cellulose macrofibers and Ⅱ-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper(PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of Ⅱ-cellulose hydrogel and Ⅰ-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water(oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.
基金We gratefully acknowledge the financial support from National Key Research and Development Project,China(2019YFA0708700)the National Natural Science Foundation of China(52222403,52074333)the Innovation Fund Project for graduate students of China University of Petroleum(East China)(22CX04049A).
文摘The membrane method based on adaptive wettability shows great advantages in oil-water separation.At present,researches focus on the excellent application performance of the membrane material,while the quantitative analysis of interactions in oil-water separation is rarely recognized.Herein,we constructed an adaptable wettability membrane with multiple polymer networks by polydopamine(PDA)and mussel-inspired amphiphilic polymer.Based on the Owens three-probe liquid method,the surface energy of the modified membrane was verified to meet the adaptive wettability conditions,with surface energies(γ-8)of 147.6 mJ m^(−2)(superhydrophilic/underwater superoleophobic)and 49.87 mJ m^(−2)(superhydrophobic/superoleophobic),respectively.The adhesion or repulsion of the membrane to the oil phase under different conditions during the separation process was quantified by the chemical probe AFM technique.In addition,the oil-water selective separation mechanism was further analyzed in a simplified membrane microchannel model.The results show that the different wetting produces capillary additional pressure in opposite directions,resulting in different energies to be overcome when the oil or water passes through the microchannels,thus achieving selective separation.
基金the National Natural Science Foundation of China(No.21776319 and No.21476269).
文摘In this work,a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh.The as-fabricated copper mesh displayed prominent superoleophilicity and superhydrophobicity with a huge water contact angle about 154.39°and oil contact angle near 0°Moreover,the coated copper mesh showed high separation efficiency approximately 99.3%,and huge water flux about 9962.3 L·h^-1·m-2,which could be used to separate various organic solvents/water mixtures.Furthermore,the coated copper mesh showed favorable stability that the separation efficiency remained above 90%after 10 separation cycles.Benefiting from the excellent photocatalytic degradation ability of tungsten trioxide,the coated copper mesh possessed the self-cleaning capacity.Therefore,the mesh contaminated with lubricating oil could regain superhydrophobic property,and this property of self-cleaning permitted that the fabricated copper mesh could be repeatedly used for oil and water separation.
文摘This paper presents a superhydrophobic melamine(ME)sponge(ME-g-PLMA)prepared via high-energy radiation-induced in situ covalent grafting of long-alkyl-chain dodecyl methacrylate(LMA)onto an ME sponge for efficient oil–water separation.The obtained ME-g-PLMA sponge had an excellent pore structure with superhydrophobic(water contact angle of 154°)and superoleophilic properties.It can absorb various types of oils up to 66–168 times its mass.The ME-g-PLMA sponge can continuously separate oil slicks in water by connecting a pump or separating oil underwater with a gravity-driven device.In addition,it maintained its highly hydrophobic properties even after long-term immersion in different corrosive solutions and repeated oil adsorption.The modified ME-g-PLMA sponge exhibited excellent separation properties and potential for oil spill cleanup.
基金Financial support from the National Natural Science Foundation of China (No. 51873192)Zhejiang Provincial Natural Science Foundation of China (No. LZ20E030002)。
文摘Surface deposition based on metal-phenolic networks(MPNs) has received increasing interest in recent years. The catechol structure is generally considered to be essential to the formation of MPNs. Our most recent results have demonstrated that some kinds of monophenols can form MPNs on substrate surfaces.Herein, we report a fast and effective surface-coating system based on the coordination of 3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid, a kind of monophenol, with Fe^(3+). Compared with other metal ions such as Cu^(2+)and Ni^(2+), Fe^(3+)with stronger electron acceptability can coordinate with the monophenol more strongly to form MPNs, and moreover, the deposition time significantly decreases to 40 min from generally 24 h. It is demonstrated that the deposition process is controlled by the coordination, Fe^(3+)hydrolysis, and deprotonation of the monophenol. The coatings endow substrates such as polypropylene microfiltration membrane with underwater superoleophobicity, which can be applied in oil/water separation with high separation efficiency and great long-term stability. In addition, the coated membranes are positively charged and thus are useful in selective adsorption of dyes. The present work not only provides a novel, fast, and one-step deposition method to fabricate MPNs, but also demonstrates that the fabrication efficiency of monophenol-based MPNs is comparable with that of polyphenol-based MPNs.
基金the financial support from National Key Research & Development Program of China (2017B0602702)。
文摘In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modification with n-dodecyl mercaptan(DDT). This method provides a new strategy to fabricate superhydrophobic PU sponge with a water contact angle of 157° for absorbing oil with low cost and in large scale. It exhibits the strong absorption capacity and highly selective characteristic for various kinds of oils which can be recycled by simple squeezing. Besides, the as-prepared sponge can deal with the floating and underwater oils, indicating its application value in handling oil spills and domestic oily wastewater. The good self-cleaning ability shows the potential to clear the pollutants due to the ultralow adhesion to water. Especially, the most important point is that the superhydrophobic sponge can continuously and effectively separate the oil/water mixture against the condition of turbulent disturbance by using our designed device system, which exhibit its good superhydrophobicity, strong stability.Furthermore, the SS-PU still maintained stable absorption performance after 150 cycle tests without losing capacity obviously, showing excellent durability in long-term operation and significant potential as an efficient absorbent in large-scale dispose of oily water.
基金supported by the National Natural Science Foundation of China(21303232)the China Postdoctoral Science Foundation(2018M632610)
文摘It is of great necessity yet still a challenge to develop superwetting functional interfacial materials for simultaneously separating insoluble oil and degrading soluble dye pollutants in practical wastewater.In this work,a Ag-CuO heterostructure-decorated mesh was fabricated via facile alkali etchingcalcination and photoreduction approaches.The as-synthesized mesh with superhydrophilicity and underwater superoleophobicity displayed high separation efficiency(>99.998%)for diverse oil/water mixtures.Besides,it demonstrated more superior photocatalytic performance in dye degradation than those of bare CuO nanostructure-coated materials,which is primarily attributed to the intensive visible light harvesting and efficient electron-holes separation occurred on noble metal-semiconductor heterostructures.Furthermore,on account of the tenacity of Cu substrate as well as enhanced structural stability,this binary composite-decorated mesh exhibited highly reliable durability and robustness after 10 cycles of photocatalytic degradation tests,and even being ultrasonic worn for 30 min.More importantly,our developed mesh was capable of in situ catalytic degrading water-soluble organic dyes during oil/water separation under visible light irradiation.Therefore,such a dexterous and feasible strategy may afford a new route to construct bifunctional and predurable materials for actual sewage purification.
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(Grant No.KJCX1-YW-21)
文摘The oil/water separation in a liquid-liquid cylindrical cyclone is experimentally studied in this article.The effects of the flow split-ratio and the flow rate on the oil/water separation performance are determined.From the experimental results,it is shown that with the increase of the flow split-ratio,the oil/water separation efficiency is enhanced at first,and an optimal flow split-ratio exists,beyond that optimal split-ratio,the watercut in the underflow keeps constant,while the oil content in the overflow begins to decrease.The process of the oil core structure formation and the phase distribution in the cyclone are determined by numerical simulations.Furthermore,the dependence of the separation efficiency on the Reynolds number and the flow split-ratio is investigated based on a dimensional analysis.A comparison between the predicted values and the experimental data shows a good agreement.
基金supported by the National Natural Science Foundation of China(51973100)the China Postdoctoral Science Foundation(2020M682125)+1 种基金the National Key Research and Development Project of China(2019YFC0121402)State Key Laboratory of Bio-Fibers and Eco-Textiles,Qingdao University(RZ2000003334).
文摘The frequent occurrence of crude oil leakage accidents and the massive discharge of industrial oily wastewater not only caused huge damage and pollution to the ecosystem but also wasted a lot of precious resources.Therefore,it is urgent to solve the worldwide problem of oil/water separation.As a leader in advanced fiber materials,nanofibrous materials prepared by electrospinning have the advantages of high permeability,high separation efficiency,large specific surface area,adjustable wettability,simple preparation process,and low cost,making it attracted more attention of researchers in oil/water separation.This article mainly reviews the recent progress of various electrospun nanofibrous materials for oil/water separation field.The preparation and synthesis of nanofibrous adsorbents,nanofibrous membranes,and nanofibrous aerogels in recent years based on different applications,design principles,and separation approaches are systematically summarized.Finally,this review discusses the challenges and future development directions in oil/water separation.
基金Supported by the Trans-century Training Programme Foundation for the Talents by the Ministry of Education of China (No.2002-48).
文摘Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water （O/W） mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., a porous ceramic membrane substrate, a polyvinylidene fluoride （PVDF） ultrafiltration sub-layer, and a polyamide/polyvinyl alcohol （PVA） composite thin top-layer. The PVDF polymer was east onto the tubular porous ceramic membranes with an immersion precipitation method, and the polyamide/PVA composite thin top-layer was fabricated with an inteffaeial polymerization method. The effects of the sub-layer composition and the recipe in the inteffaeial polymerization for fabricating the top-layer on the structure and performance of composite membranes were systematically investigated. The prepared composite membranes showed a good performance for treating the O/W microemulsions with a mean diameter of about 2.41μm. At the operating pressure of 0.4MPa, the hydraulic permeability remained steadily about 190L·m^-2·h^-1, the oil concentration in the permeate was less than 1.6mg·L^-1, and the oil rejection coefficient was always higher than 98.5% throughout the operation from the beginning.
基金supported by the Technology Innovation Program(20018540)funded by the Ministry of Trade,Industry and Energy(MOTIE,Korea)+1 种基金supported by the Basic Science Research Program of the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2021R1A4A2001403).
文摘Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvents in the membrane manufacturing process.Therefore,interest in the development of a new eco-friendly oil-water separation membrane that does not cause secondary pollution and exhibits selective wettability characteristics in water or oil is increasing.The biopolymeric nanofibrous membranes inspired by fish skin can provide specific underwater oleophobicity,which is effective for excellent oil-water separation efficiency and prevention of secondary contamination.Fish gelatin,which is highly soluble in water and has a low gelation temperature,can be electrospun in an aqueous solution and has the same polar functional groups as the hydrophilic mucilage of fish skin.In addition,the micro/nanostructure of fish skin,which induces superoleophobicity in water,introduces a bead-on-string structure using the Rayleigh instability of electrospinning.The solubility of fish gelatin in water was removed using an eco-friendly crosslinking method using reducing sugars.Fish skin-mimicking materials successfully separated suspended oil and emulsified oil,with a maximum flux of 2086 Lm^(−2) h^(−1) and a separation efficiency of more than 99%.The proposed biopolymeric nanofibrous membranes use fish gelatin,which can be extracted from fish waste and has excellent biodegradability with excellent oil-water separation performance.In addition,polymer material processing,including membrane manufacturing and crosslinking,can be realized through eco-friendly processes.Therefore,fish skin-inspired biopolymeric membrane is expected to be a promising candidate for a sustainable and effective oil-water separation membrane in the future.
基金supported by the National Key Research and Development Program of China under the contract number of 2017YFB0308000Program of Innovation Academy for Green Manufacture,CAS(IAGM2020C04)+1 种基金the State Key Laboratory of Heavy Oil Processing(SKLOP201903001)Key Research and Development Program of Hebei Province,China(20374001D)。
文摘Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively separated oil–water emulsion as it was hydrophobic underwater.But its separation efficiencies(SEs)first increased to 98.9%,then dropped to 97.6%in 10 min because of oil-fouling.To tackle this problem,FM deposited with 0%–10%silica nanoparticle(NPsFMs),then coated by fluorocarbon polymer(X-[CH_(2)CH_(2)O]nCH_(2)CH_(2)O-Y-NH-COOCH_(2)C4F9)(FCNPs FMs),was used to enhance its roughness and regulate its initial wettability to improve the anti-fouling property.FCFM and FCNPs FMs were hydrophobic and oleophobic in air and oleophobic underwater.Their water contact angles,oil contact angles and oil contact angles were 115.3°–121.1°,128.8°–136.5°,and 131.6°–136.7°,respectively,meeting the requirement of 90°–140°for coalescence separation.FCNPs FM-5 had the best separation performance with a constant value of 99.8%in 10 min,while that of FCNPs FM-10 slightly decreased to 99.5%.Theoretical released droplet(TRD)diameter,calculated by the square root of the product of pore radius and fiber diameter,was used for the evaluation of coalescence performance.Analyzed by two ideal models,TRD diameter and fiber diameter showed a parabola type relationship,proving that the separation efficiency was a collaborative work of wettability,pore size and fiber diameter.Also,it explained the SEs reduction from FCNPs FM-5 to FCNPs FM-10 was revelent to the three parameters.Moreover,FCNPsFMs effectively separated emulsions stabilized by cationic surfactant CTAB(SEs:97.3%–98.4%)and anionic surfactant SDBS(SEs:91.3%–93.4%).But they had an adverse effect on nonionic surfactant Tween-80 emulsion separation(SEs:94.0%–71.76%).Emulsions made by diverse oils can be effectively separated:octane(SEs:99.4%–100%),rapeseed oil(SEs:97.3%–98.8%),and diesel(SEs:95.2%–97.0%).These findings provide new insights for designing novel materials for oil–water separation by coalescence mechanism.
基金supported by a National Science and Technology Major Project(2017-VI-0007-0077)the National Defense Basic Scientific Research Program of China(JCIKYS2019607001)+3 种基金the National Defense S&T Pre-Research Foundation of China(6142905192509)the National Natural Science Foundation of China(51772246,51272210,50902112,and U1737209)the National Key R&D Program of China(2017YFB1103500 and 2017YFB1103501)Fundamental Research Funds for the Central Universities(3102019PJ008 and 3102018jcc002)。
文摘Superwetting surfaces have the potential to address oil pollution in water,through their ability to separate the two.However,it remains a great challenge to fabricate stable and efficient separation structures using conventional manufacturing techniques.Furthermore,the materials traditionally used for oil-water separation are not stable at high temperature.Therefore,there is a need to develop stable,customizable structures to improve the performance of oil-water separation devices.In recent years,3D printing technology has developed rapidly,and breakthroughs have been made in the fabrication of complicated ceramic structures using this technology.Here,a ceramic material with a gradient pore structure and superhydrophobic/superoleophilic properties was prepared using 3D printing for high-efficiency oil-water separation.The gradient pore structure developed here can support a flux of up to 25434 L/m^(2)h,which is nearly 40%higher than that an analogous structure with straight pores.At 200℃,the oil-water separation performance was maintained at 97.4%.Furthermore,samples of the material exhibited outstanding mechanical properties,and chemical stability in a variety of harsh environments.This study provides an efficient,simple,and reliable method for manufacturing oil-water separation materials using 3D printing,and may have broader implications for both fundamental research and industrial applications.
基金Financial support from the Science Fund for Creative Research Groups of the National Science Foundation of China (22021005)the National Natural Science Foundation of China (21776032)the Innovation Team of Dalian University of Technology (DUT2017TB01)。
文摘Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.
基金the financial support of the National Natural Science Foundation of China(Grant no.51703130)Zhejiang Provincial Natural Science Foundation of China(Grant no.LY18E080018)+1 种基金Shaoxing Public Welfare Project(Grant no.2017B70042)the International Science and Technology Cooperation Project of Shaoxing University(Grant no.2019LGGH1004).
文摘Stimuli-responsive materials with switchable wettability have promising practical applications in oil/water separation.A novel CO_(2)-responsive cotton fabric for controlled oil/water separation was fabricated based on mussel-inspired reaction and polymerized with 2-(dimethylamino)ethyl methacrylate(DMAEMA).As expected,the modified fabric exhibited switchable hydrophilicity and hydrophobicity after CO_(2)/N_(2)alternation,and it could be used for gravity-driven CO_(2)-controlled oil/water separation.Water was selectively penetrated through the fabric and separated from oil after treating by CO_(2).A reversed wettability could be generated through simply treated with N2.It is expected that the as-prepared fabrics could be applied in smart oil/water separation due to the attractive properties of CO_(2)-switchable system.
基金This work was financially funded by the National Natural Science Foundation of China(Nos.22205247 and 21988102).
文摘In recent years,numerous studies have been reported for oil/water separation,such as superoleophilic materials for oil absorption and underwater superoleophobic membranes for continuous separation.However,for the recovery of oil slick pollution on near-shore ocean surface caused by various reasons,large area and fast availability of used materials are needed to be considered.Herein,we report an efficient and environmentally friendly method to fast process nylon mesh by surface diffuse atmospheric plasma(SDAP)for large-area oil/water separation.Nylon mesh is funcionalized by atmospheric plasma to generate micro/nano composite structures on the surface,resulting in superhydrophilicity and underwater superoleophobicity within only seconds.The pre-wetted modified nylon mesh can achieve high efficiency(>99.9%)and circulating water flux(~30,000 L·m^(-2)·h^(-1)),with high intrusion pressure(~3 kPa)and universality in oil/water separation.Regular plasma unconditionally generated in the atmosphere with the merit of efficiently functionalizing surface has the potential of large-area materials treatment.This study might take one step further for large-area industrial oily wastewater recovery and even oil slicks collection in near-shore water bodies.
