The latest generation of aero engines has set higher standards for thrust-to-weight ratio and energy conversion efficiency,making it imperative to address the challenge of efficiently and accurately machining film coo...The latest generation of aero engines has set higher standards for thrust-to-weight ratio and energy conversion efficiency,making it imperative to address the challenge of efficiently and accurately machining film cooling holes.It has been demonstrated that conventional long-pulse lasers are incapable of meeting the elevated quality surface finish requirements for these holes,a consequence of the severe thermal defects.The employment of backside water-assisted laser drilling technology confers a number of distinct advantages in terms of mitigating laser thermal damage,thus representing a highly promising solution to this challenge.However,significant accumulation of bubbles and machining products during the backside water-assisted laser drilling process has been demonstrated to have a detrimental effect on laser transmission and machining stability,thereby reducing machining quality.In order to surmount these challenges,a novel method has been proposed,namely an ultrasonic shock water flow-assisted picosecond laser drilling technique.Numerical models for ultrasonic acoustic streaming and particle tracking for machining product transport have been established to investigate the mechanism.The simulation results demonstrated that the majority of the machining products could rapidly move away from the machining area because of the action of acoustic streaming,thereby avoiding the accumulation of bubbles and products.Subsequent analysis,comparing the process performance in micro-hole machining,confirmed that the ultrasonic field could effectively eliminate bubble and chip accumulation,thus significantly improving micro-hole quality.Furthermore,the impact of ultrasonic and laser parameters on micro-hole quality under varying machining methods was thoroughly investigated.The findings demonstrated that the novel methodology outlined in this study yielded superior-quality micro-holes at elevated ultrasonic and laser power levels,in conjunction with reduced laser frequency and scanning velocity.The taper of the micro-holes produced by the new method was reduced by more than 25%compared with the other conventional methods.展开更多
BACKGROUND This case of gestational gingival tumor is huge and extremely rare in clinical practice.As the growth location of this gingival tumor is in the upper anterior tooth area,it seriously affects the pregnant wo...BACKGROUND This case of gestational gingival tumor is huge and extremely rare in clinical practice.As the growth location of this gingival tumor is in the upper anterior tooth area,it seriously affects the pregnant woman's speech and food,causing great pain to the patient.The use of Nd:YGA water mist laser to remove the gingival tumor resulted in minimal intraoperative bleeding,minimal adverse reactions,and good postoperative healing,which is worthy of clinical promotion and application.CASE SUMMARY The patient,a pregnant woman,reported a large lump in her mouth on the first day of postpartum treatment.Based on medical history and clinical examination,the diagnosis was diagnosed as gestational gingival tumor.Postoperative pathological biopsy also confirmed this diagnosis.The use of Nd:YAG water mist laser to remove the tumor resulted in minimal intraoperative bleeding,clear surgical field of view,short surgical time,and good postoperative healing.CONCLUSION In comparison to traditional surgery,Nd:YAG water mist laser surgery is minimally invasive,minimizes cell damage,reduces bleeding,ensures a clear field of vision,and virtually eliminates postoperative edema,carbonization,and the risk of cross infection.It has unique advantages in oral soft tissue surgery for pregnant patients.Therefore,the clinical application of Nd:YAG water mist laser for the treatment of gestational gingival tumors is an ideal choice.展开更多
Iron oxide nanoparticles（FeOx NPs, 5–30 nm size） prepared via laser ablation in liquid were supported onto Indium Tin Oxide conductive glass slides by magnetophoretic deposition（MD） technique. The resulting Fe O ...Iron oxide nanoparticles（FeOx NPs, 5–30 nm size） prepared via laser ablation in liquid were supported onto Indium Tin Oxide conductive glass slides by magnetophoretic deposition（MD） technique. The resulting Fe O x@ITO electrodes are characterized by a low amount of iron coverage of 16–50 nmol/cm^2,and show electrocatalytic activity towards water oxidation in neutral phosphate buffer pH 7 with 0.58 V overpotential and quantitative Faradaic efficiency towards oxygen production. XPS analysis on the oxygen region of the FeOx films reveals a substantial hydration of the surface after catalysis, recognized as a crucial step to access reactivity.展开更多
In the absorption chamber of a high-energy laser energy meter, water is directly used as an absorbing medium and the interaction of the high-power laser and the water flow can produce a variety of physical phenomena s...In the absorption chamber of a high-energy laser energy meter, water is directly used as an absorbing medium and the interaction of the high-power laser and the water flow can produce a variety of physical phenomena such as phase transitions. The unit difference method is adopted to deduce the phase transition model for water flow irradiated by a high-energy laser. In addition, the model is simulated and verified through experiments. Among them, the experimental verification uses the photographic method, shooting the distribution and the form of the air mass of water flow in different operating conditions, which are compared with the simulation results. The research shows that it is achievable to reduce the intensity of the phase transition by increasing the water flow, reducing the power intensity of the beam, shortening the distance the beam covers, reducing the initial water temperature or adopting a shorter wavelength laser. The study＇s results will provide the reference for the design of a water-direct-absorption-type high-energy laser energy meter as well as an analysis of the interaction processes of other similar high-power lasers and water flow.展开更多
Water breakdown studies by Nd-YAG laser pulses of duration 100 fs, 30 ps and 6 ns at wavelength 1064 nm are pre- formed to investigate the physical mechanisms which couple the laser energy into the medium. Calculation...Water breakdown studies by Nd-YAG laser pulses of duration 100 fs, 30 ps and 6 ns at wavelength 1064 nm are pre- formed to investigate the physical mechanisms which couple the laser energy into the medium. Calculations are carried out applying a modified kinetic model of water breakdown previously developed by Kennedy (1995) to investigate the correlation between threshold intensity of breakdown and laser pulse length. The modifications considered the introduction of diffusion and recombination loss processes which might take place under the experimental conditions applied in these calculations. The validity of the model is tested by comparing the calculated threshold intensities and the experimentally measured ones where good agreement is shown. The study of the time evolution of the electron density clarifies the correlation between the pulse length and dominant ionization mechanism. The analysis of the spatial distribution of the electron density along the radial and axial distances of the focal spot showed that the size of the formed plasma increases with the increase of the pulse length. On the other hand, studies of self-focusing effect illustrated that under the investigated experimental conditions the effect of this process has an effective contribution only at laser pulses of the order of femtosecond scale when the laser beam is focused by a lens of a focal length ≥8.0 cm. This result in turns assures that using femtosecond pulses in ophthalmic microsurgery could be a safe tool from the retinal damage.展开更多
本文建立了高效液相色谱水凝粒子激光计数法测定化妆品原料蓝铜胜肽(GHK-Cu)含量的方法。样品以0.1%三氟乙酸水溶液溶解,以0.1%三氟乙酸水溶液-0.1%三氟乙酸乙腈溶液为流动相,经CAPCELL PAK ADME色谱柱梯度洗脱分离,水凝粒子激光计数检...本文建立了高效液相色谱水凝粒子激光计数法测定化妆品原料蓝铜胜肽(GHK-Cu)含量的方法。样品以0.1%三氟乙酸水溶液溶解,以0.1%三氟乙酸水溶液-0.1%三氟乙酸乙腈溶液为流动相,经CAPCELL PAK ADME色谱柱梯度洗脱分离,水凝粒子激光计数检测器测定,挥发温度35℃,流速1.0 mL/min。GHK-Cu在此酸性条件下完全解离为GHK和Cu^(2+),分离度较好,GHK在3.125~100.0μg/mL范围内线性关系良好,相关系数(r)为0.9996;Cu^(2+)在0.582~18.6μg/mL范围内线性关系良好,相关系数(r)为0.9995;加标回收率为101.3%~103.5%,相对标准偏差(n=3)小于1.0%。该方法具有操作简单、定量准确、重复性好、能够有效分离原料中杂质等优点,适用于化妆品原料蓝铜胜肽含量的测定。展开更多
Orientations of laser induced periodic surface structures(LIPSS)are usually considered to be governed by the laser polarization state.In this work,we unveil that fluid dynamics induced by femtosecond(fs)laser ablation...Orientations of laser induced periodic surface structures(LIPSS)are usually considered to be governed by the laser polarization state.In this work,we unveil that fluid dynamics induced by femtosecond(fs)laser ablation in liquid(fs-LAL)can easily break this polarization restriction to produce irregular circular-LIPSS(CLIPPS)and crisscross-LIPSS(CCLIPSS).Fs laser ablation of silicon in water shows formation of diverse LIPSS depending on ablation conditions.At a high power of 700 mW(repetition rate of 100 kHz,pulse duration of 457 fs and wavelength of 1045 nm),single/twin CLIPSS are produced at the bottom of macropores of several microns in diameter due to the formation of strong liquid vortexes and occurrence of the vortex shedding effect.Theoretical simulations validate our speculation about the formation of liquid vortex with an ultrahigh static pressure,which can induce the microstructure trenches and cracks at the sidewalls for fs-LAL of Si and tungsten(W)in water,respectively.At a low power of 50 mW,weak liquid vortexes are produced,which only give birth to curved LIPSS in the valleys of grooves.Consequently,it is deduced that liquid vortex plays a crucial role in the formation of macropores.Mountain-like microstructures induce complex fluid dynamics which can cause the formation of CCLIPSS on them.It is believed that liquid vortexes and fluid dynamics presented in this work open up new possibilities to diversify the morphologies of LIPSS formed by fs-LAL.展开更多
We fabricated complex microfluidic devices in silica glass by water-assisted femtosecond laser ablation and sub- sequent heat treatment. The experimental results show that after heat treatment, the diameter of the mic...We fabricated complex microfluidic devices in silica glass by water-assisted femtosecond laser ablation and sub- sequent heat treatment. The experimental results show that after heat treatment, the diameter of the microehannels is significantly reduced and the internal surface roughness is improved. The diameters of the fabricated microehannels can be modulated by changing the annealing temperature and the annealing time. During annealing, the temperature affects the diameter and shape of the protrusions in microfluidic devices very strongly, and these changes are mainly caused by uniform expansion and the action of surface tension.展开更多
The acetic acid-water binary system is a classical hydroxy-carboxy mixed system, while new and interesting phenomena appear under stimulated Raman scattering(SRS).Compared with the weaker signal of the acetic acid-wat...The acetic acid-water binary system is a classical hydroxy-carboxy mixed system, while new and interesting phenomena appear under stimulated Raman scattering(SRS).Compared with the weaker signal of the acetic acid-water binary system obtained in spontaneous Raman scattering, SRS provides a finer band and a relatively distinct structural transition point.The structural transformation points are respectively at 30% and 80% by volume ratio under the condition of spontaneous Raman spectroscopy, while they are respectively at 15% and 25% under the condition of SRS.This phenomenon is attributed to the generation of laser induced plasma and shockwave induced dynamic high pressure environment during SRS.展开更多
A highly-sensitive automatic transient laser-induced breakdown spectroscopy （LIBS） system is designed and integrated. It successfully avoids the delay time selecting problem in the conventional LIBS system, and real...A highly-sensitive automatic transient laser-induced breakdown spectroscopy （LIBS） system is designed and integrated. It successfully avoids the delay time selecting problem in the conventional LIBS system, and realizes the LIBS data acquisition with high spatiotemporal resolution automatically. Multiple transient spectra can be obtained in each measurement, which will provide more information for spectral research. The water-vapour and liquid-water Raman scattering spectra are captured by this system, and the comparison of experimental water-vapour Raman scattering spectrum with theoretical data verifies the reliability of the LIBS system. Based on this system, the air laser induced air breakdown spectra are captured and analysed. The system is also useful for the research on water-vapour Raman Lidar remote sensing.展开更多
In the paper, the enhanced measurements of the laser micro-jet processing are discussed. In fact, within pure water breakdown threshold of laser, the less focal which focused with the appropriate focusing lens and the...In the paper, the enhanced measurements of the laser micro-jet processing are discussed. In fact, within pure water breakdown threshold of laser, the less focal which focused with the appropriate focusing lens and the small nozzle of water chamber enhance the laser power density ,at the same time, the laser beam transport in the wave guided water with the proper total reflection angle. The laser power which depended on the properties of the diameter, the coupling water chamber and the coupling efficiency of the micro-jet and laser beam expect of the properties of laser.展开更多
基金supported by the National Natural Science Foundation of China(No.52205468,No.52275431,No.52375186)China Postdoctoral Science Foundation(No.2025M771349)Zhejiang Province Natural Science Foundation(No.LD22E050001)。
文摘The latest generation of aero engines has set higher standards for thrust-to-weight ratio and energy conversion efficiency,making it imperative to address the challenge of efficiently and accurately machining film cooling holes.It has been demonstrated that conventional long-pulse lasers are incapable of meeting the elevated quality surface finish requirements for these holes,a consequence of the severe thermal defects.The employment of backside water-assisted laser drilling technology confers a number of distinct advantages in terms of mitigating laser thermal damage,thus representing a highly promising solution to this challenge.However,significant accumulation of bubbles and machining products during the backside water-assisted laser drilling process has been demonstrated to have a detrimental effect on laser transmission and machining stability,thereby reducing machining quality.In order to surmount these challenges,a novel method has been proposed,namely an ultrasonic shock water flow-assisted picosecond laser drilling technique.Numerical models for ultrasonic acoustic streaming and particle tracking for machining product transport have been established to investigate the mechanism.The simulation results demonstrated that the majority of the machining products could rapidly move away from the machining area because of the action of acoustic streaming,thereby avoiding the accumulation of bubbles and products.Subsequent analysis,comparing the process performance in micro-hole machining,confirmed that the ultrasonic field could effectively eliminate bubble and chip accumulation,thus significantly improving micro-hole quality.Furthermore,the impact of ultrasonic and laser parameters on micro-hole quality under varying machining methods was thoroughly investigated.The findings demonstrated that the novel methodology outlined in this study yielded superior-quality micro-holes at elevated ultrasonic and laser power levels,in conjunction with reduced laser frequency and scanning velocity.The taper of the micro-holes produced by the new method was reduced by more than 25%compared with the other conventional methods.
文摘BACKGROUND This case of gestational gingival tumor is huge and extremely rare in clinical practice.As the growth location of this gingival tumor is in the upper anterior tooth area,it seriously affects the pregnant woman's speech and food,causing great pain to the patient.The use of Nd:YGA water mist laser to remove the gingival tumor resulted in minimal intraoperative bleeding,minimal adverse reactions,and good postoperative healing,which is worthy of clinical promotion and application.CASE SUMMARY The patient,a pregnant woman,reported a large lump in her mouth on the first day of postpartum treatment.Based on medical history and clinical examination,the diagnosis was diagnosed as gestational gingival tumor.Postoperative pathological biopsy also confirmed this diagnosis.The use of Nd:YAG water mist laser to remove the tumor resulted in minimal intraoperative bleeding,clear surgical field of view,short surgical time,and good postoperative healing.CONCLUSION In comparison to traditional surgery,Nd:YAG water mist laser surgery is minimally invasive,minimizes cell damage,reduces bleeding,ensures a clear field of vision,and virtually eliminates postoperative edema,carbonization,and the risk of cross infection.It has unique advantages in oral soft tissue surgery for pregnant patients.Therefore,the clinical application of Nd:YAG water mist laser for the treatment of gestational gingival tumors is an ideal choice.
基金supported by the Italian Ministero dell’Università e della Ricerca (MIUR), (FIRB RBAP11C58Y, "Nano Solar" and PRIN 2010 "Hi-Phuture")COST action CM1205 "CARISMA: CAtalytic Rout Ines for Small Molecule Activation"
文摘Iron oxide nanoparticles（FeOx NPs, 5–30 nm size） prepared via laser ablation in liquid were supported onto Indium Tin Oxide conductive glass slides by magnetophoretic deposition（MD） technique. The resulting Fe O x@ITO electrodes are characterized by a low amount of iron coverage of 16–50 nmol/cm^2,and show electrocatalytic activity towards water oxidation in neutral phosphate buffer pH 7 with 0.58 V overpotential and quantitative Faradaic efficiency towards oxygen production. XPS analysis on the oxygen region of the FeOx films reveals a substantial hydration of the surface after catalysis, recognized as a crucial step to access reactivity.
文摘In the absorption chamber of a high-energy laser energy meter, water is directly used as an absorbing medium and the interaction of the high-power laser and the water flow can produce a variety of physical phenomena such as phase transitions. The unit difference method is adopted to deduce the phase transition model for water flow irradiated by a high-energy laser. In addition, the model is simulated and verified through experiments. Among them, the experimental verification uses the photographic method, shooting the distribution and the form of the air mass of water flow in different operating conditions, which are compared with the simulation results. The research shows that it is achievable to reduce the intensity of the phase transition by increasing the water flow, reducing the power intensity of the beam, shortening the distance the beam covers, reducing the initial water temperature or adopting a shorter wavelength laser. The study＇s results will provide the reference for the design of a water-direct-absorption-type high-energy laser energy meter as well as an analysis of the interaction processes of other similar high-power lasers and water flow.
文摘Water breakdown studies by Nd-YAG laser pulses of duration 100 fs, 30 ps and 6 ns at wavelength 1064 nm are pre- formed to investigate the physical mechanisms which couple the laser energy into the medium. Calculations are carried out applying a modified kinetic model of water breakdown previously developed by Kennedy (1995) to investigate the correlation between threshold intensity of breakdown and laser pulse length. The modifications considered the introduction of diffusion and recombination loss processes which might take place under the experimental conditions applied in these calculations. The validity of the model is tested by comparing the calculated threshold intensities and the experimentally measured ones where good agreement is shown. The study of the time evolution of the electron density clarifies the correlation between the pulse length and dominant ionization mechanism. The analysis of the spatial distribution of the electron density along the radial and axial distances of the focal spot showed that the size of the formed plasma increases with the increase of the pulse length. On the other hand, studies of self-focusing effect illustrated that under the investigated experimental conditions the effect of this process has an effective contribution only at laser pulses of the order of femtosecond scale when the laser beam is focused by a lens of a focal length ≥8.0 cm. This result in turns assures that using femtosecond pulses in ophthalmic microsurgery could be a safe tool from the retinal damage.
文摘本文建立了高效液相色谱水凝粒子激光计数法测定化妆品原料蓝铜胜肽(GHK-Cu)含量的方法。样品以0.1%三氟乙酸水溶液溶解,以0.1%三氟乙酸水溶液-0.1%三氟乙酸乙腈溶液为流动相,经CAPCELL PAK ADME色谱柱梯度洗脱分离,水凝粒子激光计数检测器测定,挥发温度35℃,流速1.0 mL/min。GHK-Cu在此酸性条件下完全解离为GHK和Cu^(2+),分离度较好,GHK在3.125~100.0μg/mL范围内线性关系良好,相关系数(r)为0.9996;Cu^(2+)在0.582~18.6μg/mL范围内线性关系良好,相关系数(r)为0.9995;加标回收率为101.3%~103.5%,相对标准偏差(n=3)小于1.0%。该方法具有操作简单、定量准确、重复性好、能够有效分离原料中杂质等优点,适用于化妆品原料蓝铜胜肽含量的测定。
基金This work was supported by the national key R&D program for internation-al collaboration under grant No.2018YFE9103900in part by the Nat-ural Science Foundation of China(NSFC)grant No.11972384 and the Guangdong MEPP Fund,grant No.GDOE[2019]A01.
文摘Orientations of laser induced periodic surface structures(LIPSS)are usually considered to be governed by the laser polarization state.In this work,we unveil that fluid dynamics induced by femtosecond(fs)laser ablation in liquid(fs-LAL)can easily break this polarization restriction to produce irregular circular-LIPSS(CLIPPS)and crisscross-LIPSS(CCLIPSS).Fs laser ablation of silicon in water shows formation of diverse LIPSS depending on ablation conditions.At a high power of 700 mW(repetition rate of 100 kHz,pulse duration of 457 fs and wavelength of 1045 nm),single/twin CLIPSS are produced at the bottom of macropores of several microns in diameter due to the formation of strong liquid vortexes and occurrence of the vortex shedding effect.Theoretical simulations validate our speculation about the formation of liquid vortex with an ultrahigh static pressure,which can induce the microstructure trenches and cracks at the sidewalls for fs-LAL of Si and tungsten(W)in water,respectively.At a low power of 50 mW,weak liquid vortexes are produced,which only give birth to curved LIPSS in the valleys of grooves.Consequently,it is deduced that liquid vortex plays a crucial role in the formation of macropores.Mountain-like microstructures induce complex fluid dynamics which can cause the formation of CCLIPSS on them.It is believed that liquid vortexes and fluid dynamics presented in this work open up new possibilities to diversify the morphologies of LIPSS formed by fs-LAL.
基金Project supported by the Science and Technology Foundation of Heilongjiang Province,China (Grant No. A200912)the Program of Excellence Team in the Harbin Institute of Technology,China
文摘We fabricated complex microfluidic devices in silica glass by water-assisted femtosecond laser ablation and sub- sequent heat treatment. The experimental results show that after heat treatment, the diameter of the microehannels is significantly reduced and the internal surface roughness is improved. The diameters of the fabricated microehannels can be modulated by changing the annealing temperature and the annealing time. During annealing, the temperature affects the diameter and shape of the protrusions in microfluidic devices very strongly, and these changes are mainly caused by uniform expansion and the action of surface tension.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11574113,11374123,and 11104106)Science and Technology Planning Project of Jilin Province,China(Grant Nos.20180101238JC,20170204076GX,20180101006JC,20190103041JH,and 20190201260JC)Post-Doctoral Innovative Talent Support Program,China(Grant Nos.BX20180127 and 2019M651192)
文摘The acetic acid-water binary system is a classical hydroxy-carboxy mixed system, while new and interesting phenomena appear under stimulated Raman scattering(SRS).Compared with the weaker signal of the acetic acid-water binary system obtained in spontaneous Raman scattering, SRS provides a finer band and a relatively distinct structural transition point.The structural transformation points are respectively at 30% and 80% by volume ratio under the condition of spontaneous Raman spectroscopy, while they are respectively at 15% and 25% under the condition of SRS.This phenomenon is attributed to the generation of laser induced plasma and shockwave induced dynamic high pressure environment during SRS.
基金Project supported by the Macao Science and Technology Development Fund,Macao Special Administrative Region (SAR),China(Grant No. 021/2007/A2)the National Natural Science Foundation of China (Grant No. 11176019)
文摘A highly-sensitive automatic transient laser-induced breakdown spectroscopy （LIBS） system is designed and integrated. It successfully avoids the delay time selecting problem in the conventional LIBS system, and realizes the LIBS data acquisition with high spatiotemporal resolution automatically. Multiple transient spectra can be obtained in each measurement, which will provide more information for spectral research. The water-vapour and liquid-water Raman scattering spectra are captured by this system, and the comparison of experimental water-vapour Raman scattering spectrum with theoretical data verifies the reliability of the LIBS system. Based on this system, the air laser induced air breakdown spectra are captured and analysed. The system is also useful for the research on water-vapour Raman Lidar remote sensing.
文摘In the paper, the enhanced measurements of the laser micro-jet processing are discussed. In fact, within pure water breakdown threshold of laser, the less focal which focused with the appropriate focusing lens and the small nozzle of water chamber enhance the laser power density ,at the same time, the laser beam transport in the wave guided water with the proper total reflection angle. The laser power which depended on the properties of the diameter, the coupling water chamber and the coupling efficiency of the micro-jet and laser beam expect of the properties of laser.
