Fine-grained Mg-6Zn-4Y alloy was prepared by an ingot metallurgy process with hot extrusion at 300 ℃.The microstructure was studied by XRD,OM,SEM and TEM,and the tensile properties were tested at room temperature.The...Fine-grained Mg-6Zn-4Y alloy was prepared by an ingot metallurgy process with hot extrusion at 300 ℃.The microstructure was studied by XRD,OM,SEM and TEM,and the tensile properties were tested at room temperature.The results show that the alloy is composed of α-Mg and W-phase.The microstructure of the as-extruded alloy has a bimodal grain size distribution.The fine grains with the mean size of 1.2 μm are formed by dynamic recrystallization.The coarse grains（about 23% in area fraction） are unrecrystallized regions which are elongated along extrusion direction.The engineering stress—strain curve shows a pronounced yield point.The ultimate tensile strength,yield strength,and elongation are（371±10） MPa,（350±5） MPa and（7±2）%,respectively.The high strengths are attributed to the fine-grained matrix structure enhanced by W-phase particles,nano-scaled precipitates,and strong basal plane texture.展开更多
Microstructures and mechanical properties of LZ83?xY alloys containingI-phase andW-phase were investigated by XRD, OM, SEM and EDS. The experimental results show that the content ofI-phase andW-phase changes by varyin...Microstructures and mechanical properties of LZ83?xY alloys containingI-phase andW-phase were investigated by XRD, OM, SEM and EDS. The experimental results show that the content ofI-phase andW-phase changes by varying Zn/Y mass ratio in the LZ83?xY alloys. The cohesion ofI-phase/α-Mg eutectic pockets can enhance the strength in the as-cast LZ83?0.5Y and LZ83?1.0Y alloys, while theW-phase has no obvious strengthening effect on the LZ83?1.5Y alloy. In the extruded alloys, the I-phase andW-phase were extruded into the particles with nanoscale size in theβ-Li matrix phase. The dispersion strengthening of W-phase was more obvious because of the higher volume fraction. The ultimate tensile strength of extruded LZ83?1.5Y alloy is up to 238 MPa while the elongation is up to 20%.展开更多
The spheroidizing mechanism of W-phase in the Mg–Zn–Y–Mn–（B） alloys during solid-solution treatment was investigated by using kinetic methodologies. The microstructure and mechanical properties of heat-treated ...The spheroidizing mechanism of W-phase in the Mg–Zn–Y–Mn–（B） alloys during solid-solution treatment was investigated by using kinetic methodologies. The microstructure and mechanical properties of heat-treated Mg_（94）Zn_（2.5）-Y_（2.5）Mn_1 alloy containing 0.003 wt% B were compared with heat-treated Mg_（94）Zn_（2.5）-Y_（2.5）Mn_1 alloy. The heat-treated Mg_（94）Zn_（2.5）-Y_（2.5）Mn_1 alloy with 0.003 wt% B contained fine and uniform W-phase particles, which exhibited optimal mechanical performance. The ultimate tensile strength, yield strength and elongation were 287.7, 125.5 MPa and 21.1%,respectively.展开更多
The contradiction between mechanical properties and thermal conductivity of magnesium alloys is a roadblock for their widespread applications.In this study,we developed a hot-extruded Mg-8Gd-1Er-8Zn-1Mn alloy with hig...The contradiction between mechanical properties and thermal conductivity of magnesium alloys is a roadblock for their widespread applications.In this study,we developed a hot-extruded Mg-8Gd-1Er-8Zn-1Mn alloy with high-strength and high-thermal-conductivity via dual-phase,W-phase andα-Mn,synergistically strengthening.The alloy extruded at 300℃ exhibited the yield strength and elongation of 372 MPa and 12%,respectively,it simultaneously demonstrated a high thermal conductivity of 134.3W/(m·K).After extrusion,the original coarse W-phase in the alloy was broken into near-spheroidal particles,which reduced the probability of electron scattering.In addition,a large number of solute atoms dynamically precipitated in the form of nanoscale rod-like W-phase andα-Mn,makingα-Mg matrix revert to a nearly periodic arrangement state.The high yield strength of the alloy is predominantly determined by grain boundary strengthening as well as W-phase andα-Mn dual-phase strengthening.Notably,the strategy of dual-phase strengthening provides a valuable approach for developing structure-function integrated Mg alloys.展开更多
Tensile test of the as-cast Mg-6Zn-2Er alloy was conducted at room temperature. The results indicate that the alloy is inclined to failure when the strain reaches 5.6%. The coarse secondary phases are responsible for ...Tensile test of the as-cast Mg-6Zn-2Er alloy was conducted at room temperature. The results indicate that the alloy is inclined to failure when the strain reaches 5.6%. The coarse secondary phases are responsible for the failure, especially for the Mg3Zn3Er2 phase （W-phase）. It is indicated that the existence of the W-phase activates the stress concentrations due to the incapacity of W-phase for the load transfer, which results in the void at the inner of the W-phase. In comparison, the interface between the matrix and the secondary phase is stable. In conclusion, the characters of the secondary phases with respect to size, distribution, morphology and type, play an important role in the plastic deformation behavior of the alloy.展开更多
本文采用最新文献报道的Ni-Cr、Ni-W和Cr-W二元热力学参数,结合Ni-Cr-W三元体系实验数据,使用相图计算(calculation of phase diagram,CALPHAD)方法进行热力学评估和优化计算,获得了一套自洽的热力学参数,其中σ相的热力学模型为亚点阵...本文采用最新文献报道的Ni-Cr、Ni-W和Cr-W二元热力学参数,结合Ni-Cr-W三元体系实验数据,使用相图计算(calculation of phase diagram,CALPHAD)方法进行热力学评估和优化计算,获得了一套自洽的热力学参数,其中σ相的热力学模型为亚点阵模型:(Cr,Ni,W)_(0.533)(Cr,Ni,W)_(0.333)(Cr,Ni,W)_(0.134)。计算的Ni-Cr-W体系等温截面图(1273、1473、1673和1813 K)和液相面投影图与实验数据匹配较好,说明本工作的热力学数据库能够很好地再现实验结果,对此体系相关的高元合金设计具有参考意义。展开更多
基金Project (50271054) supported by the National Natural Science Foundation of ChinaProject (20070700003) supported by the Doctorate Programs Foundation of Ministry of Education of China+1 种基金Project (102102210031) supported by the Science and Technologies Foundation of Henan Province, ChinaProject (2010A430008) supported by the Natural Science Foundation of Henan Educational Committee of China
文摘Fine-grained Mg-6Zn-4Y alloy was prepared by an ingot metallurgy process with hot extrusion at 300 ℃.The microstructure was studied by XRD,OM,SEM and TEM,and the tensile properties were tested at room temperature.The results show that the alloy is composed of α-Mg and W-phase.The microstructure of the as-extruded alloy has a bimodal grain size distribution.The fine grains with the mean size of 1.2 μm are formed by dynamic recrystallization.The coarse grains（about 23% in area fraction） are unrecrystallized regions which are elongated along extrusion direction.The engineering stress—strain curve shows a pronounced yield point.The ultimate tensile strength,yield strength,and elongation are（371±10） MPa,（350±5） MPa and（7±2）%,respectively.The high strengths are attributed to the fine-grained matrix structure enhanced by W-phase particles,nano-scaled precipitates,and strong basal plane texture.
基金Project(2007CB613702)supported by the National Basic Research Program of ChinaProject(CDJZR14130007)supported by the Fundamental Research Funds for the Central Universities,China
文摘Microstructures and mechanical properties of LZ83?xY alloys containingI-phase andW-phase were investigated by XRD, OM, SEM and EDS. The experimental results show that the content ofI-phase andW-phase changes by varying Zn/Y mass ratio in the LZ83?xY alloys. The cohesion ofI-phase/α-Mg eutectic pockets can enhance the strength in the as-cast LZ83?0.5Y and LZ83?1.0Y alloys, while theW-phase has no obvious strengthening effect on the LZ83?1.5Y alloy. In the extruded alloys, the I-phase andW-phase were extruded into the particles with nanoscale size in theβ-Li matrix phase. The dispersion strengthening of W-phase was more obvious because of the higher volume fraction. The ultimate tensile strength of extruded LZ83?1.5Y alloy is up to 238 MPa while the elongation is up to 20%.
基金support from the National Natural Science Foundation of China(Nos.51474153 and 51574175)Ph.D.Programs Foundation of Ministry of Education of the People’s Republic of China(No.20111402110004)Natural Science Foundation of Shanxi Province(Nos.2009011028-3 and 2012011022-1)
文摘The spheroidizing mechanism of W-phase in the Mg–Zn–Y–Mn–（B） alloys during solid-solution treatment was investigated by using kinetic methodologies. The microstructure and mechanical properties of heat-treated Mg_（94）Zn_（2.5）-Y_（2.5）Mn_1 alloy containing 0.003 wt% B were compared with heat-treated Mg_（94）Zn_（2.5）-Y_（2.5）Mn_1 alloy. The heat-treated Mg_（94）Zn_（2.5）-Y_（2.5）Mn_1 alloy with 0.003 wt% B contained fine and uniform W-phase particles, which exhibited optimal mechanical performance. The ultimate tensile strength, yield strength and elongation were 287.7, 125.5 MPa and 21.1%,respectively.
基金supported by the Nation Key Research and Development Program of China(No.2021YFB3701100).
文摘The contradiction between mechanical properties and thermal conductivity of magnesium alloys is a roadblock for their widespread applications.In this study,we developed a hot-extruded Mg-8Gd-1Er-8Zn-1Mn alloy with high-strength and high-thermal-conductivity via dual-phase,W-phase andα-Mn,synergistically strengthening.The alloy extruded at 300℃ exhibited the yield strength and elongation of 372 MPa and 12%,respectively,it simultaneously demonstrated a high thermal conductivity of 134.3W/(m·K).After extrusion,the original coarse W-phase in the alloy was broken into near-spheroidal particles,which reduced the probability of electron scattering.In addition,a large number of solute atoms dynamically precipitated in the form of nanoscale rod-like W-phase andα-Mn,makingα-Mg matrix revert to a nearly periodic arrangement state.The high yield strength of the alloy is predominantly determined by grain boundary strengthening as well as W-phase andα-Mn dual-phase strengthening.Notably,the strategy of dual-phase strengthening provides a valuable approach for developing structure-function integrated Mg alloys.
基金Projects(51071004,51101002)supported by the National Natural Science Foundation of ChinaProject(2011BAE22B01-3)supported by the National Science and Technology Supporting Plan during the 12th Five-Year Period,China
文摘Tensile test of the as-cast Mg-6Zn-2Er alloy was conducted at room temperature. The results indicate that the alloy is inclined to failure when the strain reaches 5.6%. The coarse secondary phases are responsible for the failure, especially for the Mg3Zn3Er2 phase （W-phase）. It is indicated that the existence of the W-phase activates the stress concentrations due to the incapacity of W-phase for the load transfer, which results in the void at the inner of the W-phase. In comparison, the interface between the matrix and the secondary phase is stable. In conclusion, the characters of the secondary phases with respect to size, distribution, morphology and type, play an important role in the plastic deformation behavior of the alloy.
文摘本文采用最新文献报道的Ni-Cr、Ni-W和Cr-W二元热力学参数,结合Ni-Cr-W三元体系实验数据,使用相图计算(calculation of phase diagram,CALPHAD)方法进行热力学评估和优化计算,获得了一套自洽的热力学参数,其中σ相的热力学模型为亚点阵模型:(Cr,Ni,W)_(0.533)(Cr,Ni,W)_(0.333)(Cr,Ni,W)_(0.134)。计算的Ni-Cr-W体系等温截面图(1273、1473、1673和1813 K)和液相面投影图与实验数据匹配较好,说明本工作的热力学数据库能够很好地再现实验结果,对此体系相关的高元合金设计具有参考意义。
