Renewable energy storage technologies are critical for transitioning to sustainable energy systems,with salt caverns playing a significant role in large-scale solutions.In water-soluble mining of low-grade salt format...Renewable energy storage technologies are critical for transitioning to sustainable energy systems,with salt caverns playing a significant role in large-scale solutions.In water-soluble mining of low-grade salt formations,insoluble impurities and interlayers detach during salt dissolution and accumulate as sediment at the cavern base,thereby reducing the storage capacity and economic viability of salt cavern gas storage(SCGS).This study investigates sediment formation mechanisms,void distribution,and voidage in the Huai'an low-grade salt mine,introducing a novel self-developed physical simulation device for two butted-well horizontal(TWH)caverns that replicates compressed air injection and brine discharge.Experiments comparing“one injection and one discharge”and“two injections and one discharge”modes revealed that(1)compressed air effectively displaces brine from sediment voids,(2)a 0.5 MPa injection pressure corresponds to a 10.3 MPa operational lower limit in practice,aligning with field data,and(3)sediment voidage is approximately 46%,validated via air-brine interface theory.The“two injections and one discharge”mode outperformed in both discharge volume and rate.Additionally,a mathematical model for brine displacement via compressed air was established.These results provide foundational insights for optimizing compressed air energy storage(CAES)in low-grade salt mines,advancing their role in renewable energy integration.展开更多
Large-grain REBa_(2)Cu_(3)O_(7-δ)(REBCO,RE=rare earth)bulk superconductors offer promising magnetic field trapping capabilities due to their high critical current density,making them ideal for many important applicat...Large-grain REBa_(2)Cu_(3)O_(7-δ)(REBCO,RE=rare earth)bulk superconductors offer promising magnetic field trapping capabilities due to their high critical current density,making them ideal for many important applications such as trapped field magnets.However,for such large-grain superconductor bulks,there are lots of voids and cracks forming during the process of melting preparation,and some of them can be up to hundreds of microns or even millimeters in size.Consequently,these larger size voids/cracks pose a great threat to the strength of the bulks due to the inherent brittleness of superconductor REBCO materials.In order to ensure the operational safety of related superconducting devices with bulk superconductors,it is firstly important to accurately detect these voids/cracks in them.In this paper,we proposed a method for quantitatively evaluating multiple voids/cracks in bulk superconductors through the magnetic field and displacement response signals at superconductor bulk surface.The proposed method utilizes a damage index constructed from the magnetic field signals and displacement responses to identify the number and preliminary location of multiple defects.By dividing the detection area into subdomains and combining the magnetic field signals with displacement responses within each subdomain,a particle swarm algorithm was employed to evaluate the location and size parameters of the defects.In contrast to other evaluation methods using only magnetic field or displacement response signals,the combined evaluation method using both signals can identify the number of cracks effectively.Numerical studies demonstrate that the morphology of voids and cracks reconstructed using the proposed algorithm ideally matches real defects and is applicable to cases where voids and cracks coexist.This study provides a theoretical basis for the quantitative detection of voids/cracks in bulk superconductors.展开更多
Nickel-based alloys are the primary structural materials in steam generators of high-temperature gas reactors.To understand the irradiation effect of nickel-based alloys,it is necessary to examine dislocation movement...Nickel-based alloys are the primary structural materials in steam generators of high-temperature gas reactors.To understand the irradiation effect of nickel-based alloys,it is necessary to examine dislocation movement and its interaction with irradiation defects at the microscale.Hardening due to voids and Ni_(3)Al precipitates may significantly impact irradiation damage in nickel-based alloys.This paper employs the molecular dynamics method to analyze the interaction between edge dislocations and irradiation defects(void and Ni_(3)Al precipitates)in face-centered cubic nickel.The effects of temperature and defect size on the interaction are also explored.The results show that the interaction process of the edge dislocation and irradiation defects can be divided into four stages:dislocation free slip,dislocation attracted,dislocation pinned,and dislocation unpinned.Interaction modes include the formation of stair-rod dislocations and the climbing of extended dislocation bundles for voids,as well as the generation of stair-rod dislocation and dislocation shear for precipitates.Besides,the interactions of edge dislocations with voids and Ni_(3)Al precipitates are strongly influenced by temperature and defect size.展开更多
The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extensio...The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extension are studied. The deformation functions of plates with voids that are symmetrically distributed in a certain manner are given and the functions are expressed by two parameters by solving the differential equations.The solution may be approximately obtained from the minimum potential energy principle. Thus, the analytic solutions of the deformation and stress of the plate are obtained. The growth of the voids and the distribution of stresses along the voids are analyzed and the influences of the degree of anisotropy, the size of the voids and the distance between the voids are discussed. The characteristics of the growth of the voids and the distribution of stresses of the plates with one void, three or five voids are obtained and compared.展开更多
Often in abandoned mine sites are present both underground voids produced by mining and the tailings of treatment plant.An interesting solution for the rehabilitation of the sites would be to place the tailings of the...Often in abandoned mine sites are present both underground voids produced by mining and the tailings of treatment plant.An interesting solution for the rehabilitation of the sites would be to place the tailings of the process in the underground mining voids,thus obtaining the reclamation of surface areas and the stabilization of abandoned voids to prevent the dangerous phenomena of subsidence.However,these operations require inert waste,which must not be source of pollution,and the choice of a water/solid optimum to ensure good conditions of pumpability.展开更多
According to the basic idea of dual-complementarity, in a simple and unified way proposed by the author, various energy principles in theory of elastic materials with voids can be established systematically, In this p...According to the basic idea of dual-complementarity, in a simple and unified way proposed by the author, various energy principles in theory of elastic materials with voids can be established systematically, In this paper, an important integral relation is given, which can be considered essentially as the generalized pr- inciple of virtual work. Based on this relation, it is possible not only to obtain the principle of virtual work and the reciprocal theorem of work in theory of elastic materials with voids, but also to derive systematically the complementary functionals for the eight-field, six-field, four-field and two-field generalized variational principles, and the principle of minimum potential and complementary energies. Furthermore, with this appro ach, the intrinsic relationship among various principles can be explained clearly.展开更多
The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-la...The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.展开更多
A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed t...A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed to obtain high-resolution designs with a relatively low computational cost.Ersatz material model based on Greville abscissae collocation scheme is utilised to represent both the Young’s modulus of the material and the density field.Two benchmark examples are tested to illustrate the effectiveness of the proposed method.Numerical results show that high-resolution designs can be obtained with relatively low computational cost,and the optimisation can be significantly improved without introducing additional DOFs.展开更多
Four cellulose ethers（CEs） were compared for their effects on the pore structure of cement paste using mercury intrusion porosimetry. The experimental results show that the total pore volume and porosity of cement p...Four cellulose ethers（CEs） were compared for their effects on the pore structure of cement paste using mercury intrusion porosimetry. The experimental results show that the total pore volume and porosity of cement pastes containing the four cellulose ethers are significantly higher than that of the pure cement pastes and the total pore volume and porosity of cement pastes containing HEC（hydroxyethyl cellulose ether） or low viscosity cellulose ethers are low in four CEs. By changing the surface tension and viscosity of liquid phase and the strengthening of liquid film between air voids in cement pastes, CEs affect the formation, diameter evolution and upward movement of air voids and the pore structure of hardening cement paste. For the four CEs, the pore volume of cement pastes containing HEC or low viscosity cellulose ethers is higher with the diameter of 30-70 nm while lower with the diameter larger than 70 nm. CEs affect the pore structure of cement paste mainly through their effects on the evolvement of the small air voids into bigger ones when the pore diameter is below 70 nm and their effects on the entrainment and stabilization of air voids when the pore diameter is above 70 nm.展开更多
The deterioration of the sleeper support on the ballasted track begins with the accumulation of sleeper voids.The increased dynamic loading in the voided zone and the ballast contact conditions cause the accelerated g...The deterioration of the sleeper support on the ballasted track begins with the accumulation of sleeper voids.The increased dynamic loading in the voided zone and the ballast contact conditions cause the accelerated growth of the settlements in the voided zones,which results in the appearance of local instabilities like ballast breakdown,white spots,subgrade defects,etc.The recent detection and quantification of the sleeper voids with track-side and onboard monitoring can help to avoid or delay the development of local instabilities.The present paper is devoted to the study of the dynamic behavior of railway track with sleeper voids in the ballast breakdown zone.The result of the experimental track-side measurements of rail acceleration and deflection is presented.The analysis shows the existence of the dynamic impact during wheel entry in the voided zone.However,the measured dynamic impact is subjected to the bias of the track-side measurement method.Both the mechanism of the impact and the measurement aspects are explained by using the one-beam model on viscoelastic foundation.The void features in the dynamic behavior are analyzed for the purpose of track-side and onboard monitoring.A practical method of the void parameter quantification is proposed.展开更多
According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In thi...According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In this paper, an important integral relation in terms of convolutions is given,which can be con- sidered as the generalized principle of virtual work in mechanics.Based on this relation,it is possible not on- ly to obtain the principle of virtual work and the reciprocal theorem in dynamic theory of elastic materials with voids,but also to derive systematically the complementary functionals for the eight-field,six-field, four-field and two-field simplified Gurtin-type variational principles.Furthermore,with this approach,the in- trinsic relationship among various principles can be explained clearly.展开更多
The development of pores in a clastic reservoir is one of the most important research subjects in oil-gas exploration and development, whereas the many reasons for the formation of secondary porosity have increased th...The development of pores in a clastic reservoir is one of the most important research subjects in oil-gas exploration and development, whereas the many reasons for the formation of secondary porosity have increased the degree of difficulty in such research. Thus the research aims are to discover the controlling factors of solutional voids in feldspars and to predict favorable regions for these voids. Macroscopic and systematic researches into the relationship between the kaolinite content in the feldspar solutional void developed area of the Chang 2 reservoir group of the Triassic Yanchang Formation in the Midwest Ordos Basin and the solutional void in feldspar have been made, and from this it can be determined that the kaolinite content has an indicative function to the distribution of the solutional void in feldspar. Solutional void in feldspar is relatively well developed at the area where kaolinite content is high. Although the factors affecting kaolinite content are complicated, yet that of the research area is mainly affected by the impact of the leaching atmospheric water acting on the palaeogeomorphology. Three favorable zone belts for the development of solutional voids in feldspars are forecasted on the basis of restoration of palaeogeomorphology.展开更多
Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic che...Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic chemical vapor deposition.Then,the AlN template was annealed at 1700℃for an hour to introduce the voids.It was found that voids were formed in the AlN layer after high-temperature annealing and they were mainly distributed around the AlN interlayer.Meanwhile,the dislocation density of the AlN template decreased from 5.26×10^(9)cm^(-2)to 5.10×10^(8)cm^(-2).This work provides a possible method to introduce voids into AlN layer at a designated height,which will benefit the design of AlN-based devices.展开更多
Eye observation was used to evaluate the segregation degree of asphalt pavement, which was not much creditable. To the asphalt pavement, road surface texture measuring method which has appeared recently can identify g...Eye observation was used to evaluate the segregation degree of asphalt pavement, which was not much creditable. To the asphalt pavement, road surface texture measuring method which has appeared recently can identify gradational segregation; but it can’t reflect the influence of the temperature segregation. However, using infrared temperature detector to evaluate the segregation must be taken during paving, which brings much inconvenience. In this paper, measuring the air voids distribution using non-nuclear density gauge to evaluate asphalt pavement segregation was introduced. Result shows that this method can directly reflect the comprehensive results of the two types of segregation in a high efficient and accurate way. Moreover, using the sketch map of segregation area can help to analyze the segregation reason visually.展开更多
Using the Klauder enhanced quantization as a way to specify the cosmological constant as a baseline for the mass of a graviton, we eventually come up and then we will go to the relationship of a Planck Length to a De ...Using the Klauder enhanced quantization as a way to specify the cosmological constant as a baseline for the mass of a graviton, we eventually come up and then we will go to the relationship of a Planck Length to a De Broglie length in order to link how we construct a massive graviton mass, with cosmological constant and to interface that with entropy in the early universe. We then close with a reference to the possible quantum origins of e folding and inflation. This objective once achieved is connected with a possible mechanism for the creation of voids, in the later universe, using a construction of shock fronts from J. P. Onstriker, 1991 and followed up afterwards with Mukhanov’s physical foundations to Cosmology book section as to indicate how variable input into self reproduction of the Universe structures may lead to void formation in the present era. A connection with Wesson’s 5 dimensional cosmology is brought up in terms of a generalized uncertainty principle which may lead to variations of varying energy input into self reproducing cosmological structures which could enable non uniform structure formation and hence voids. One of the stunning results is that the figure of number of gravitons, about 1058, early on, is commensurate with a need for negative pressure, (middle of manuscript) which is a stunning result, partly based on Volovik and weakly interacting Bose gas model for pressure, which is completely unexpected. Note that in quantum physics, the idea statistically is that at large quantum numbers, we have an approach to classical physics results. We will do the same as to our cosmological work. This means that the <img src="Edit_3fd07615-be41-41a5-90b8-a24ef8f2c3f3.png" alt="" />, in our last set of equations, which as we indicate has the surprise condition that for Pre-Planckian space-time that a very large value for initial Pre Planckian dimensions <em>d</em><sub>min</sub> which is the dimensional input into the Pre Planckian state, prior to emergence into Planckian cosmology conditions. We conclude by stating the following question. Can extra dimensions come from a Multiverse feed into Pre-Planckian space-time? See Theorem at the end of this publication. Our answer is in the affirmative, and it has intellectual similarities to George Chapline’s work with Black hole physics.展开更多
The purpose of this research is to study the effect of voids on the surface wave propagation in a layer of a transversely isotropic thermoelastic material with voids lying over an isotropic elastic half-space. The fre...The purpose of this research is to study the effect of voids on the surface wave propagation in a layer of a transversely isotropic thermoelastic material with voids lying over an isotropic elastic half-space. The frequency equation is derived after developing a mathematical model for welded and smooth contact boundary conditions. The dispersion curves giving the phase velocity and attenuation coefficient via wave number are plotted graphically to depict the effects of voids and anisotropy for welded contact boundary conditions. The specific loss and amplitudes of the volume fraction field, the normal stress, and the temperature change for welded contact are obtained and shown graphically for a particular model to depict the voids and anisotropy effects. Some special cases are also deduced from the present investigation.展开更多
The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility...The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility condition of the material. The solution was approximately obtained from the minimum potential energy principle. The growth of voids was discussed. One can see that an initial central circular-cylinder void becomes an elliptic-cylinder void, but an initial non-centeral circular-cylinder void becomes an elliptic-like cylinder void and the center of void has a shift. The stress distributions along the edges of voids were given and the phenomenon of stress concentration was observed. The influences of the distribution manner and size of voids, as well as the distance between them on the growth of voids were analyzed.展开更多
Green-Naghdi （G-N） theory of thermoelasticity is employed to study the deformation of micropolar thermoelastic solid with voids considering the influence of various sources acting on the plane surface. The normal mo...Green-Naghdi （G-N） theory of thermoelasticity is employed to study the deformation of micropolar thermoelastic solid with voids considering the influence of various sources acting on the plane surface. The normal mode analysis is used to obtain the analytical expressions of the displacement components, force stress, coupled stress, variation of volume fraction field and temperature distribution. The computed results are presented graphically when the volume source is applied. Comparisons of type II and type III with and without micropolarity effect are made with the results predicted in the context of （G-N） theory.展开更多
A zinc phthalocyanine containing (17-crown-5) ether subunits has been synthesized UV-visible absorption and fluorescence emission spectra and associated photophysical parameters have been determined. In addition to th...A zinc phthalocyanine containing (17-crown-5) ether subunits has been synthesized UV-visible absorption and fluorescence emission spectra and associated photophysical parameters have been determined. In addition to the fluorescence at 710 nm from S-1, a strong upper excited state emission around 424 nn has been detected. X-ray structural analysis showed that the crown ether unit is conformationally deformed and oblate like that accounted for the unusual spectroscopic properties.展开更多
In the present paper, the propagation of surface wave in a generalized thermoelastic solid with voids is considered. The governing equations are solved to obtain the general solution in x-z plane. The appropriate boun...In the present paper, the propagation of surface wave in a generalized thermoelastic solid with voids is considered. The governing equations are solved to obtain the general solution in x-z plane. The appropriate boundary conditions at an interface between two dissimilar half-spaces are satisfied by appropriate particular solutions to obtain the frequency equation of the surface wave in the medium. Some special cases are also discussed.展开更多
基金financial support from the National Key Research and Development Program of China(No.2024YFB4007100)the Basic ForwardLooking Project of the Sinopec Science and Technology Department,“Research on the Long-Term Sealing Mechanism of Multi-layer Salt Cavern Hydrogen Storage”(No.P24197-4)。
文摘Renewable energy storage technologies are critical for transitioning to sustainable energy systems,with salt caverns playing a significant role in large-scale solutions.In water-soluble mining of low-grade salt formations,insoluble impurities and interlayers detach during salt dissolution and accumulate as sediment at the cavern base,thereby reducing the storage capacity and economic viability of salt cavern gas storage(SCGS).This study investigates sediment formation mechanisms,void distribution,and voidage in the Huai'an low-grade salt mine,introducing a novel self-developed physical simulation device for two butted-well horizontal(TWH)caverns that replicates compressed air injection and brine discharge.Experiments comparing“one injection and one discharge”and“two injections and one discharge”modes revealed that(1)compressed air effectively displaces brine from sediment voids,(2)a 0.5 MPa injection pressure corresponds to a 10.3 MPa operational lower limit in practice,aligning with field data,and(3)sediment voidage is approximately 46%,validated via air-brine interface theory.The“two injections and one discharge”mode outperformed in both discharge volume and rate.Additionally,a mathematical model for brine displacement via compressed air was established.These results provide foundational insights for optimizing compressed air energy storage(CAES)in low-grade salt mines,advancing their role in renewable energy integration.
基金supported by the National Natural Science Foundation of China(Grant Nos.12232005 and 12072101).
文摘Large-grain REBa_(2)Cu_(3)O_(7-δ)(REBCO,RE=rare earth)bulk superconductors offer promising magnetic field trapping capabilities due to their high critical current density,making them ideal for many important applications such as trapped field magnets.However,for such large-grain superconductor bulks,there are lots of voids and cracks forming during the process of melting preparation,and some of them can be up to hundreds of microns or even millimeters in size.Consequently,these larger size voids/cracks pose a great threat to the strength of the bulks due to the inherent brittleness of superconductor REBCO materials.In order to ensure the operational safety of related superconducting devices with bulk superconductors,it is firstly important to accurately detect these voids/cracks in them.In this paper,we proposed a method for quantitatively evaluating multiple voids/cracks in bulk superconductors through the magnetic field and displacement response signals at superconductor bulk surface.The proposed method utilizes a damage index constructed from the magnetic field signals and displacement responses to identify the number and preliminary location of multiple defects.By dividing the detection area into subdomains and combining the magnetic field signals with displacement responses within each subdomain,a particle swarm algorithm was employed to evaluate the location and size parameters of the defects.In contrast to other evaluation methods using only magnetic field or displacement response signals,the combined evaluation method using both signals can identify the number of cracks effectively.Numerical studies demonstrate that the morphology of voids and cracks reconstructed using the proposed algorithm ideally matches real defects and is applicable to cases where voids and cracks coexist.This study provides a theoretical basis for the quantitative detection of voids/cracks in bulk superconductors.
基金supported by the Ministry of Industry and Information Technology of China(grant number TC220A04W-7,203)CNNC Youth Elite Scientific Research Project,the National Key R&D Plan of China(grant number 2020YFB1901600)the National Science Technology Major Project of China(grant numbers 2017ZX06902012 and 2017ZX06901024).
文摘Nickel-based alloys are the primary structural materials in steam generators of high-temperature gas reactors.To understand the irradiation effect of nickel-based alloys,it is necessary to examine dislocation movement and its interaction with irradiation defects at the microscale.Hardening due to voids and Ni_(3)Al precipitates may significantly impact irradiation damage in nickel-based alloys.This paper employs the molecular dynamics method to analyze the interaction between edge dislocations and irradiation defects(void and Ni_(3)Al precipitates)in face-centered cubic nickel.The effects of temperature and defect size on the interaction are also explored.The results show that the interaction process of the edge dislocation and irradiation defects can be divided into four stages:dislocation free slip,dislocation attracted,dislocation pinned,and dislocation unpinned.Interaction modes include the formation of stair-rod dislocations and the climbing of extended dislocation bundles for voids,as well as the generation of stair-rod dislocation and dislocation shear for precipitates.Besides,the interactions of edge dislocations with voids and Ni_(3)Al precipitates are strongly influenced by temperature and defect size.
文摘The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extension are studied. The deformation functions of plates with voids that are symmetrically distributed in a certain manner are given and the functions are expressed by two parameters by solving the differential equations.The solution may be approximately obtained from the minimum potential energy principle. Thus, the analytic solutions of the deformation and stress of the plate are obtained. The growth of the voids and the distribution of stresses along the voids are analyzed and the influences of the degree of anisotropy, the size of the voids and the distance between the voids are discussed. The characteristics of the growth of the voids and the distribution of stresses of the plates with one void, three or five voids are obtained and compared.
文摘Often in abandoned mine sites are present both underground voids produced by mining and the tailings of treatment plant.An interesting solution for the rehabilitation of the sites would be to place the tailings of the process in the underground mining voids,thus obtaining the reclamation of surface areas and the stabilization of abandoned voids to prevent the dangerous phenomena of subsidence.However,these operations require inert waste,which must not be source of pollution,and the choice of a water/solid optimum to ensure good conditions of pumpability.
基金The project supported by the National Natural Science Foundation of China
文摘According to the basic idea of dual-complementarity, in a simple and unified way proposed by the author, various energy principles in theory of elastic materials with voids can be established systematically, In this paper, an important integral relation is given, which can be considered essentially as the generalized pr- inciple of virtual work. Based on this relation, it is possible not only to obtain the principle of virtual work and the reciprocal theorem of work in theory of elastic materials with voids, but also to derive systematically the complementary functionals for the eight-field, six-field, four-field and two-field generalized variational principles, and the principle of minimum potential and complementary energies. Furthermore, with this appro ach, the intrinsic relationship among various principles can be explained clearly.
文摘The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.
基金National Natural Science Foundation of China under Grant Nos.51675525 and 11725211.
文摘A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed to obtain high-resolution designs with a relatively low computational cost.Ersatz material model based on Greville abscissae collocation scheme is utilised to represent both the Young’s modulus of the material and the density field.Two benchmark examples are tested to illustrate the effectiveness of the proposed method.Numerical results show that high-resolution designs can be obtained with relatively low computational cost,and the optimisation can be significantly improved without introducing additional DOFs.
基金the National Natural Science Foundation of China(Nos.51461135001 and 51741804)the Natural Science Foundation of Hunan Province,China(No.2017JJ2066)the Scientific Research Project of Education Department,Hunan Province,China(No.17A054)
文摘Four cellulose ethers（CEs） were compared for their effects on the pore structure of cement paste using mercury intrusion porosimetry. The experimental results show that the total pore volume and porosity of cement pastes containing the four cellulose ethers are significantly higher than that of the pure cement pastes and the total pore volume and porosity of cement pastes containing HEC（hydroxyethyl cellulose ether） or low viscosity cellulose ethers are low in four CEs. By changing the surface tension and viscosity of liquid phase and the strengthening of liquid film between air voids in cement pastes, CEs affect the formation, diameter evolution and upward movement of air voids and the pore structure of hardening cement paste. For the four CEs, the pore volume of cement pastes containing HEC or low viscosity cellulose ethers is higher with the diameter of 30-70 nm while lower with the diameter larger than 70 nm. CEs affect the pore structure of cement paste mainly through their effects on the evolvement of the small air voids into bigger ones when the pore diameter is below 70 nm and their effects on the entrainment and stabilization of air voids when the pore diameter is above 70 nm.
基金The authors acknowledge the support of Swiss Federal Railways with the experimental measurements.
文摘The deterioration of the sleeper support on the ballasted track begins with the accumulation of sleeper voids.The increased dynamic loading in the voided zone and the ballast contact conditions cause the accelerated growth of the settlements in the voided zones,which results in the appearance of local instabilities like ballast breakdown,white spots,subgrade defects,etc.The recent detection and quantification of the sleeper voids with track-side and onboard monitoring can help to avoid or delay the development of local instabilities.The present paper is devoted to the study of the dynamic behavior of railway track with sleeper voids in the ballast breakdown zone.The result of the experimental track-side measurements of rail acceleration and deflection is presented.The analysis shows the existence of the dynamic impact during wheel entry in the voided zone.However,the measured dynamic impact is subjected to the bias of the track-side measurement method.Both the mechanism of the impact and the measurement aspects are explained by using the one-beam model on viscoelastic foundation.The void features in the dynamic behavior are analyzed for the purpose of track-side and onboard monitoring.A practical method of the void parameter quantification is proposed.
基金The project supported by the Foundation of Zhongshan University Advanced Research Center
文摘According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In this paper, an important integral relation in terms of convolutions is given,which can be con- sidered as the generalized principle of virtual work in mechanics.Based on this relation,it is possible not on- ly to obtain the principle of virtual work and the reciprocal theorem in dynamic theory of elastic materials with voids,but also to derive systematically the complementary functionals for the eight-field,six-field, four-field and two-field simplified Gurtin-type variational principles.Furthermore,with this approach,the in- trinsic relationship among various principles can be explained clearly.
文摘The development of pores in a clastic reservoir is one of the most important research subjects in oil-gas exploration and development, whereas the many reasons for the formation of secondary porosity have increased the degree of difficulty in such research. Thus the research aims are to discover the controlling factors of solutional voids in feldspars and to predict favorable regions for these voids. Macroscopic and systematic researches into the relationship between the kaolinite content in the feldspar solutional void developed area of the Chang 2 reservoir group of the Triassic Yanchang Formation in the Midwest Ordos Basin and the solutional void in feldspar have been made, and from this it can be determined that the kaolinite content has an indicative function to the distribution of the solutional void in feldspar. Solutional void in feldspar is relatively well developed at the area where kaolinite content is high. Although the factors affecting kaolinite content are complicated, yet that of the research area is mainly affected by the impact of the leaching atmospheric water acting on the palaeogeomorphology. Three favorable zone belts for the development of solutional voids in feldspars are forecasted on the basis of restoration of palaeogeomorphology.
基金the National Key Research and Development Program of China(Grant No.2017YFB0404100)the National Natural Science Foundation of China(Grant Nos.61827813,61974144,and 62004127)+2 种基金the Key Research Program of the Chinese Academy of Sciences(Grant No.XDPB22)the Key-Area Research and Development Program of Guangdong Province,China(Grant Nos.2020B010169001 and 2020B010174003)the Science and Technology Foundation of Shenzhen(Grant No.JSGG20191129114216474)。
文摘Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic chemical vapor deposition.Then,the AlN template was annealed at 1700℃for an hour to introduce the voids.It was found that voids were formed in the AlN layer after high-temperature annealing and they were mainly distributed around the AlN interlayer.Meanwhile,the dislocation density of the AlN template decreased from 5.26×10^(9)cm^(-2)to 5.10×10^(8)cm^(-2).This work provides a possible method to introduce voids into AlN layer at a designated height,which will benefit the design of AlN-based devices.
文摘Eye observation was used to evaluate the segregation degree of asphalt pavement, which was not much creditable. To the asphalt pavement, road surface texture measuring method which has appeared recently can identify gradational segregation; but it can’t reflect the influence of the temperature segregation. However, using infrared temperature detector to evaluate the segregation must be taken during paving, which brings much inconvenience. In this paper, measuring the air voids distribution using non-nuclear density gauge to evaluate asphalt pavement segregation was introduced. Result shows that this method can directly reflect the comprehensive results of the two types of segregation in a high efficient and accurate way. Moreover, using the sketch map of segregation area can help to analyze the segregation reason visually.
文摘Using the Klauder enhanced quantization as a way to specify the cosmological constant as a baseline for the mass of a graviton, we eventually come up and then we will go to the relationship of a Planck Length to a De Broglie length in order to link how we construct a massive graviton mass, with cosmological constant and to interface that with entropy in the early universe. We then close with a reference to the possible quantum origins of e folding and inflation. This objective once achieved is connected with a possible mechanism for the creation of voids, in the later universe, using a construction of shock fronts from J. P. Onstriker, 1991 and followed up afterwards with Mukhanov’s physical foundations to Cosmology book section as to indicate how variable input into self reproduction of the Universe structures may lead to void formation in the present era. A connection with Wesson’s 5 dimensional cosmology is brought up in terms of a generalized uncertainty principle which may lead to variations of varying energy input into self reproducing cosmological structures which could enable non uniform structure formation and hence voids. One of the stunning results is that the figure of number of gravitons, about 1058, early on, is commensurate with a need for negative pressure, (middle of manuscript) which is a stunning result, partly based on Volovik and weakly interacting Bose gas model for pressure, which is completely unexpected. Note that in quantum physics, the idea statistically is that at large quantum numbers, we have an approach to classical physics results. We will do the same as to our cosmological work. This means that the <img src="Edit_3fd07615-be41-41a5-90b8-a24ef8f2c3f3.png" alt="" />, in our last set of equations, which as we indicate has the surprise condition that for Pre-Planckian space-time that a very large value for initial Pre Planckian dimensions <em>d</em><sub>min</sub> which is the dimensional input into the Pre Planckian state, prior to emergence into Planckian cosmology conditions. We conclude by stating the following question. Can extra dimensions come from a Multiverse feed into Pre-Planckian space-time? See Theorem at the end of this publication. Our answer is in the affirmative, and it has intellectual similarities to George Chapline’s work with Black hole physics.
基金the Council of Scientific and Industrial Research (CSIR) for the financial support
文摘The purpose of this research is to study the effect of voids on the surface wave propagation in a layer of a transversely isotropic thermoelastic material with voids lying over an isotropic elastic half-space. The frequency equation is derived after developing a mathematical model for welded and smooth contact boundary conditions. The dispersion curves giving the phase velocity and attenuation coefficient via wave number are plotted graphically to depict the effects of voids and anisotropy for welded contact boundary conditions. The specific loss and amplitudes of the volume fraction field, the normal stress, and the temperature change for welded contact are obtained and shown graphically for a particular model to depict the voids and anisotropy effects. Some special cases are also deduced from the present investigation.
文摘The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility condition of the material. The solution was approximately obtained from the minimum potential energy principle. The growth of voids was discussed. One can see that an initial central circular-cylinder void becomes an elliptic-cylinder void, but an initial non-centeral circular-cylinder void becomes an elliptic-like cylinder void and the center of void has a shift. The stress distributions along the edges of voids were given and the phenomenon of stress concentration was observed. The influences of the distribution manner and size of voids, as well as the distance between them on the growth of voids were analyzed.
文摘Green-Naghdi （G-N） theory of thermoelasticity is employed to study the deformation of micropolar thermoelastic solid with voids considering the influence of various sources acting on the plane surface. The normal mode analysis is used to obtain the analytical expressions of the displacement components, force stress, coupled stress, variation of volume fraction field and temperature distribution. The computed results are presented graphically when the volume source is applied. Comparisons of type II and type III with and without micropolarity effect are made with the results predicted in the context of （G-N） theory.
文摘A zinc phthalocyanine containing (17-crown-5) ether subunits has been synthesized UV-visible absorption and fluorescence emission spectra and associated photophysical parameters have been determined. In addition to the fluorescence at 710 nm from S-1, a strong upper excited state emission around 424 nn has been detected. X-ray structural analysis showed that the crown ether unit is conformationally deformed and oblate like that accounted for the unusual spectroscopic properties.
文摘In the present paper, the propagation of surface wave in a generalized thermoelastic solid with voids is considered. The governing equations are solved to obtain the general solution in x-z plane. The appropriate boundary conditions at an interface between two dissimilar half-spaces are satisfied by appropriate particular solutions to obtain the frequency equation of the surface wave in the medium. Some special cases are also discussed.
