Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior i...Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, to date there has been relatively little explicit identification of stress singularities caused by fluid flows. In this study, stress and pressure singularities induced by steady flows of viscous incompressible fluids are asymptotically identified. This is done by taking advantage of an earlier result that the Navier-Stokes equations are locally governed by Stokes flow in angular corners. Findings for power singularities are confirmed by developing and using an analogy with solid mechanics. This analogy also facilitates the identification of flow-induced log singularities. Both types of singularity are further confirmed for two global configurations by applying convergence-divergence checks to numerical results. Even though these flow-induced stress singularities are analogous to singularities in solid mechanics, they nonetheless render a number of structural configurations singular that were not previously appreciated as such from identifications within solid mechanics alone.展开更多
Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior i...Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, only of late has there been much in the way of corresponding identifications of flow-induced stress singularities in fluid mechanics. These recent asymptotic identifications are for a single incompressible viscous fluid： Here the asymptotic approach is extended to apply to a configuration entailing two such fluids, For this configuration, various specifications leading to power or log singularities are determined. These results demonstrate that flow-induced stress singularities can occur in a structural container at a location where no singularities are identified within solid mechanics alone.展开更多
In this paper, the variational principles of hydrodynamic problems for the incompressible and compressible viscous fluids are established. These principles are principles of maximum power losses. Their generalized var...In this paper, the variational principles of hydrodynamic problems for the incompressible and compressible viscous fluids are established. These principles are principles of maximum power losses. Their generalized variational principles are also discussed on the basis of Lagrangian multiplier methods.展开更多
An earlier asymptotic analysis identified the flow-induced power and log singularities present when two nonmiscible,incompressible,viscous fluids contact a wall with no slip permitted.Here a parallel asymptotic analys...An earlier asymptotic analysis identified the flow-induced power and log singularities present when two nonmiscible,incompressible,viscous fluids contact a wall with no slip permitted.Here a parallel asymptotic analysis identifies such singularities in pressures and stresses when slip is admitted.While the singularity exponents for the two types of contact conditions are similar,the angles of interface impingement that have either power or log singularities are usually quite distinct.展开更多
The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone...The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone transverse wave is presented by a vector potential function. The displacements of particles in different phases of the aggregate are defined in terms of these potential functions. It is shown that there exist three longitudinal waves and one transverse wave. The phenomena of reflection and refraction due to longitudinal and transverse waves at a plane interface between an elastic solid half-space and a porous solid half-space saturated with two immiscible viscous fluids are investigated. For the presence of viscosity in pore-fluids, the waves refracted to the porous medium attenuate in the direction normal to the interface. The ratios of the amplitudes of the reflected and refracted waves to that of the incident wave are calculated as a non- singular system of linear algebraic equations. These amplitude ratios are used to further calculate the shares of different scattered waves in the energy of the incident wave. The modulus of the amplitude and the energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of the energy across the interface is verified. The effects of variations in non-wet saturation of pores and frequencies on the energy partition are depicted graphically and discussed,展开更多
Volatile organic compounds(VOCs)are generally toxic and harmful substances that can cause health and environmental problems.The removal of VOCs from polymers has become a key problem.The effective devolatilization to ...Volatile organic compounds(VOCs)are generally toxic and harmful substances that can cause health and environmental problems.The removal of VOCs from polymers has become a key problem.The effective devolatilization to remove VOCs from high viscous fluids such as polymer is necessary and is of great importance.In this study,the devolatilization effect of a rotating packed bed(RPB)was studied by using polydimethylsiloxane as the viscous fluid and acetone as the VOC.The devolatilization rate and liquid phase volume(KLa)have been evaluated.The results indicated that the optimum conditions were the high-gravity factor of 60,liquid flow rate of 10 L·h^(-1),and vacuum degree of 0.077 MPa.The dimensionless correlation of KLa was established,and the deviations between predicted and experimental values were less than±28%.The high-gravity technology will result in lower mass transfer resistance in the devolatilization process,enhance the mass transfer process of acetone,and improve the removal effect of acetone.This work provides a promising path for the removal of volatiles from polymers in combination with high-gravity technology.It can provide the basis for the application of RPB in viscous fluids.展开更多
This paper presents and proves the mixed compatible finite element variationalprinciples in dynamics of viscous barotropic fluids. When the principles are proved, itis found that the compatibility conditions of stress...This paper presents and proves the mixed compatible finite element variationalprinciples in dynamics of viscous barotropic fluids. When the principles are proved, itis found that the compatibility conditions of stress can be naturally satisfied. The gene-rallzed variational principles with mixed hybrid incompatible finite elements are alsopresented and proved, and they can reduce the computation of incompatible elements indynamics of viscous barotropic flows.展开更多
Cylindrical and spherical dust-electron-acoustic （DEA） shock waves and double layers in an unmagnetized, col- lisionless, complex or dusty plasma system are carried out. The plasma system is assumed to be composed o...Cylindrical and spherical dust-electron-acoustic （DEA） shock waves and double layers in an unmagnetized, col- lisionless, complex or dusty plasma system are carried out. The plasma system is assumed to be composed of inertial and viscous cold electron fluids, nonextensive distributed hot electrons, Maxwellian ions, and negatively charged stationary dust grains. The standard reductive perturbation technique is used to derive the nonlinear dynamical equations, that is, the nonplanar Burgers equation and the nonplanar further Burgers equation. They are also numerically analyzed to investigate the basic features of shock waves and double layers （DLs）. It is observed that the roles of the viscous cold electron fluids, nonextensivity of hot electrons, and other plasma parameters in this investigation have significantly modified the basic features （such as, polarity, amplitude and width） of the nonplanar DEA shock waves and DLs. It is also observed that the strength of the shock is maximal for the spherical geometry, intermediate for cylindrical geometry, while it is minimal for the planar geometry. The findings of our results obtained from this theoretical investigation may be useful in understanding the nonlinear phenomena associated with the nonplanar DEA waves in both space and laboratory plasmas.展开更多
This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This researc...This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.展开更多
Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-...Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-junction. Nitrogen is used as the gas phase, and glycerol-water mixtures with different mass concentration of glycerol as the liquid phase. The evolution of the gas−liquid interface during bubble breakup at the microfluidic T-junction is explored. The thinning of the bubble neck includes the squeezing stage and the rapid pinch-off stage. In the squeezing stage, the power law relation is found between the minimum width of the bubble neck and the time, and the values of exponents α1 and α2 are influenced by the viscous force. The values of pre-factors m_(1) and m_(2) are negatively correlated with the capillary number. In the rapid pinch-off stage, the thinning of the bubble neck is predominated by the surface tension, and the minimum width of the bubble neck can be scaled with the remaining time as power-law. The propagation of the bubble tip can be characterized by the power law between the movement distance and the time, with decreasing exponent as increased liquid viscosity.展开更多
The present work discusses both the linear and nonlinear stability conditions of a viscous falling film down the outer surface of a solid vertical cylinder which moves in the direction of its axis with a constant velo...The present work discusses both the linear and nonlinear stability conditions of a viscous falling film down the outer surface of a solid vertical cylinder which moves in the direction of its axis with a constant velocity. After studying the linear conditions, a generalized nonlinear kine- matic model is then derived to present the physical system. Applying the boundary conditions, analytical solutions are obtained using the long-wave perturbation method. In the first step, the normal mode method is used to characterize the linear behaviors. In the second step, the nonlinear film flow model is solved by using the method of multiple scales, to obtain Ginzburg-Landau equation. The influence of some physical parameters is discussed in both linear and nonlinear steps of the problem, and the results are displayed in many plots showing the stability criteria in various param- eter planes.展开更多
A meshless numerical simulation method, the moving-particle semi-implicit method （MPS） is presented in this paper to study the sloshing phenomenon in ocean and naval engineering. As a meshless method, MPS uses parti...A meshless numerical simulation method, the moving-particle semi-implicit method （MPS） is presented in this paper to study the sloshing phenomenon in ocean and naval engineering. As a meshless method, MPS uses particles to replace the mesh in traditional methods, the governing equations are discretized by virtue of the relationship of particles, and the Poisson equation of pressure is solved by incomplete Cholesky conjugate gradient method （ICCG）, the free surface is tracked by the change of numerical density. A numerical experiment of viscous liquid sloshing tank was presented and compared with the result got by the difference method with the VOF, and an additional modification step was added to make the simulation more stable. The results show that the MPS method is suitable for the simulation of viscous liquid sloshing, with the advantage in arranging the particles easily, especially on some complex curved surface.展开更多
The computational fluid dynamics （CFD） method is used to numerically simulate a propeller wake flow field in open water. A sub-domain hybrid mesh method was adopted in this paper. The computation domain was separate...The computational fluid dynamics （CFD） method is used to numerically simulate a propeller wake flow field in open water. A sub-domain hybrid mesh method was adopted in this paper. The computation domain was separated into two sub-domains, in which tetrahedral elements were used in the inner domain to match the complicated geometry of the propeller, while hexahedral elements were used in the outer domain. The mesh was locally refined on the propeller surface and near the wake flow field, and a size function was used to control the growth rate of the grid. Sections at different axial location were used to study the spatial evolution of the propeller wake in the region ranging from the disc to one propeller diameter （D） downstream. The numerical results show that the axial velocity fluctuates along the wake flow; radial velocity, which is closely related to vortices, attenuates strongly. The trailing vortices interact with the tip vortex at the blades＇ trailing edge and then separate. The strength of the vortex shrinks rapidly, and the radius decreases 20% at one diameter downstream.展开更多
The behavior of viscous fluid damper applied in coupling structures subjected to near-fault earthquake was studied.The structural nonlinearity was characterized by Bouc-Wen model and several near-fault ground motions ...The behavior of viscous fluid damper applied in coupling structures subjected to near-fault earthquake was studied.The structural nonlinearity was characterized by Bouc-Wen model and several near-fault ground motions were simulated by the combination of a recorded earthquake(background ground motion) with equivalent velocity pulses that possess near-fault features.Extensive parametric studies were carried out to find the appropriate damping coefficient.Performances of viscous fluid dampers were demonstrated by the relationship between the force and displacement,the maximal damper force and stroke.The control performances were demonstrated in terms of the response reductions of adjacent structures.The results show that the dynamic responses of adjacent structures are mitigated greatly.Proper damping coefficients of connecting fluid dampers have a small difference,while adjacent structures under different near-fault ground motions with the same peak acceleration.The maximum force of damper is about 0.8 MN,and the maximum damper stroke is about ±550 mm.Satisfied viscous fluid dampers can be produced according to the current manufacturing skills.展开更多
In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force outp...In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper＇s initial stroke as it moves away from its neutral position. This phenomenon is referred to as the effect of ＂deadzone＂. The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect ofdeadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers. An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 3 5 6 for calculation of equivalent damping if a deadzone is to be considered.展开更多
We discuss the effects of the surface slip on streamline patterns and their bifurcations for the peristaltic transport of a Newtonian fluid. The flow is in a two-dimensional symmetric channel or an axisymmetric tube. ...We discuss the effects of the surface slip on streamline patterns and their bifurcations for the peristaltic transport of a Newtonian fluid. The flow is in a two-dimensional symmetric channel or an axisymmetric tube. An exact expression for the stream function is obtained in the wave frame under the assumptions of long wavelength and low Reynolds number for both cases. For the discussion of the particle path in the wave frame, a system of nonlinear autonomous differential equations is established and the methods of dynamical systems are used to discuss the local bifurcations and their topological changes. Moreover, all types of bifurcations and their topological changes are discussed graphically. Finally, the global bifurcation diagram is used to summarize the bifurcations.展开更多
Acoustofluidic technology combines acoustic and microfluidic technologies to realize particle manipulation in microchannels driven by acoustic waves,and the acoustic radiation force(ARF)with boundaries is important fo...Acoustofluidic technology combines acoustic and microfluidic technologies to realize particle manipulation in microchannels driven by acoustic waves,and the acoustic radiation force(ARF)with boundaries is important for particle manipulation in an acoustofluidic device.In the work reported here,the ARF on a free cylinder immersed in a viscous fluid with an incident plane wave between two impedance boundaries is derived analytically and calculated numerically.The influence of multiple scattering between the particle and the impedance boundaries is described by means of image theory,the finite-series method,and the translational addition theorem,and multiple scattering is included partly in image theory.The ARF on a free rigid cylinder in a viscous fluid is analyzed by numerical calculation,with consideration given to the effects of the distances from cylinder edge to boundaries,fluid viscosity,cylinder size,and boundary reflectivity.The results show that the interaction between the two boundaries and the cylinder makes the ARF change more violently with different frequencies,while increasing the viscosity can reduce the amplitude of the ARF in boundary space.This study provides a theoretical basis for particle manipulation by the ARF in acoustofluidics.展开更多
Free convection of a viscous electrically conducting liquid past a vertical stretching surface is investigated in the presence of a transverse magnetic field.Natural convection is driven by both thermal and solutal bu...Free convection of a viscous electrically conducting liquid past a vertical stretching surface is investigated in the presence of a transverse magnetic field.Natural convection is driven by both thermal and solutal buoyancy.The original partial differential equations governing the problem are turned into a set of ordinary differential equations through a similar variables transformation.This alternate set of equations is solved through a Differential Transform Method(DTM)and the Pade approximation.The response of the considered physical system to the non-dimensional parameters accounting for the relative importance of different effects is assessed considering different situations.展开更多
Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dam...Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dampers.Two fluid viscous dampers were designed based on CFD models.The first device was a linear viscous damper with straight orifices.The second was a nonlinear viscous damper containing a one-way pressure-responsive valve inside its orifices.Both dampers were detailed based on CFD simulations,and their internal fluid flows were investigated.Full-scale specimens of both dampers were manufactured and tested under dynamic loads.According to the tests results,both dampers demonstrate stable cyclic behaviors,and as expected,the nonlinear damper generally tends to dissipate more energy compared to its linear counterpart.Good compatibility was achieved between the experimentally measured damper force-velocity curves and those estimated from CFD analyses.Using a thermography camera,a rise in temperature of the dampers was measured during the tests.It was found that output force of the manufactured devices was virtually independent of temperature even during long duration loadings.Accordingly,temperature dependence can be ignored in CFD models,because a reliable temperature compensator mechanism was used(or intended to be used)by the damper manufacturer.展开更多
This paper treats the numerical calculation of a steady two-dimensional viscous flow past a flexible membrane. Both edges of the membrane are fixed in the flow and its chord is set normal to the flow. The numerical ca...This paper treats the numerical calculation of a steady two-dimensional viscous flow past a flexible membrane. Both edges of the membrane are fixed in the flow and its chord is set normal to the flow. The numerical calculations of the Navier-Stokes equation based on a finite difference method and a relaxation method are carried out for several values of the membrane tension in cases when the Reynolds numbers are 5, 10 and 20. It is found that the membrane tension has a minimum value below which there is no steady shape of the membrane. Two different shapes of the membrane are possible at a given value of tension: the one is of small deformation, while the other a large deformation. There appear twin vortices in the concave region of the membrane shape if its deformation increases to a certain extent.展开更多
文摘Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, to date there has been relatively little explicit identification of stress singularities caused by fluid flows. In this study, stress and pressure singularities induced by steady flows of viscous incompressible fluids are asymptotically identified. This is done by taking advantage of an earlier result that the Navier-Stokes equations are locally governed by Stokes flow in angular corners. Findings for power singularities are confirmed by developing and using an analogy with solid mechanics. This analogy also facilitates the identification of flow-induced log singularities. Both types of singularity are further confirmed for two global configurations by applying convergence-divergence checks to numerical results. Even though these flow-induced stress singularities are analogous to singularities in solid mechanics, they nonetheless render a number of structural configurations singular that were not previously appreciated as such from identifications within solid mechanics alone.
文摘Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, only of late has there been much in the way of corresponding identifications of flow-induced stress singularities in fluid mechanics. These recent asymptotic identifications are for a single incompressible viscous fluid： Here the asymptotic approach is extended to apply to a configuration entailing two such fluids, For this configuration, various specifications leading to power or log singularities are determined. These results demonstrate that flow-induced stress singularities can occur in a structural container at a location where no singularities are identified within solid mechanics alone.
文摘In this paper, the variational principles of hydrodynamic problems for the incompressible and compressible viscous fluids are established. These principles are principles of maximum power losses. Their generalized variational principles are also discussed on the basis of Lagrangian multiplier methods.
文摘An earlier asymptotic analysis identified the flow-induced power and log singularities present when two nonmiscible,incompressible,viscous fluids contact a wall with no slip permitted.Here a parallel asymptotic analysis identifies such singularities in pressures and stresses when slip is admitted.While the singularity exponents for the two types of contact conditions are similar,the angles of interface impingement that have either power or log singularities are usually quite distinct.
基金Project supported by the Council of Scientific and Industrial Research (CSIR) of New Delhi(Nos. 09/105(0169)/2008-EMR-I and 09/105(0185)/2009-EMR-I)
文摘The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone transverse wave is presented by a vector potential function. The displacements of particles in different phases of the aggregate are defined in terms of these potential functions. It is shown that there exist three longitudinal waves and one transverse wave. The phenomena of reflection and refraction due to longitudinal and transverse waves at a plane interface between an elastic solid half-space and a porous solid half-space saturated with two immiscible viscous fluids are investigated. For the presence of viscosity in pore-fluids, the waves refracted to the porous medium attenuate in the direction normal to the interface. The ratios of the amplitudes of the reflected and refracted waves to that of the incident wave are calculated as a non- singular system of linear algebraic equations. These amplitude ratios are used to further calculate the shares of different scattered waves in the energy of the incident wave. The modulus of the amplitude and the energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of the energy across the interface is verified. The effects of variations in non-wet saturation of pores and frequencies on the energy partition are depicted graphically and discussed,
基金the financial support from the Scientific Research Program of Taiyuan University (23TYQN23)
文摘Volatile organic compounds(VOCs)are generally toxic and harmful substances that can cause health and environmental problems.The removal of VOCs from polymers has become a key problem.The effective devolatilization to remove VOCs from high viscous fluids such as polymer is necessary and is of great importance.In this study,the devolatilization effect of a rotating packed bed(RPB)was studied by using polydimethylsiloxane as the viscous fluid and acetone as the VOC.The devolatilization rate and liquid phase volume(KLa)have been evaluated.The results indicated that the optimum conditions were the high-gravity factor of 60,liquid flow rate of 10 L·h^(-1),and vacuum degree of 0.077 MPa.The dimensionless correlation of KLa was established,and the deviations between predicted and experimental values were less than±28%.The high-gravity technology will result in lower mass transfer resistance in the devolatilization process,enhance the mass transfer process of acetone,and improve the removal effect of acetone.This work provides a promising path for the removal of volatiles from polymers in combination with high-gravity technology.It can provide the basis for the application of RPB in viscous fluids.
文摘This paper presents and proves the mixed compatible finite element variationalprinciples in dynamics of viscous barotropic fluids. When the principles are proved, itis found that the compatibility conditions of stress can be naturally satisfied. The gene-rallzed variational principles with mixed hybrid incompatible finite elements are alsopresented and proved, and they can reduce the computation of incompatible elements indynamics of viscous barotropic flows.
文摘Cylindrical and spherical dust-electron-acoustic （DEA） shock waves and double layers in an unmagnetized, col- lisionless, complex or dusty plasma system are carried out. The plasma system is assumed to be composed of inertial and viscous cold electron fluids, nonextensive distributed hot electrons, Maxwellian ions, and negatively charged stationary dust grains. The standard reductive perturbation technique is used to derive the nonlinear dynamical equations, that is, the nonplanar Burgers equation and the nonplanar further Burgers equation. They are also numerically analyzed to investigate the basic features of shock waves and double layers （DLs）. It is observed that the roles of the viscous cold electron fluids, nonextensivity of hot electrons, and other plasma parameters in this investigation have significantly modified the basic features （such as, polarity, amplitude and width） of the nonplanar DEA shock waves and DLs. It is also observed that the strength of the shock is maximal for the spherical geometry, intermediate for cylindrical geometry, while it is minimal for the planar geometry. The findings of our results obtained from this theoretical investigation may be useful in understanding the nonlinear phenomena associated with the nonplanar DEA waves in both space and laboratory plasmas.
基金Project(52276068)supported by the National Natural Science Foundation of China。
文摘This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.
基金supports for this project from State Key Laboratory of Chemical Safety(SKLCS–2024001)are gratefully acknowledged。
文摘Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-junction. Nitrogen is used as the gas phase, and glycerol-water mixtures with different mass concentration of glycerol as the liquid phase. The evolution of the gas−liquid interface during bubble breakup at the microfluidic T-junction is explored. The thinning of the bubble neck includes the squeezing stage and the rapid pinch-off stage. In the squeezing stage, the power law relation is found between the minimum width of the bubble neck and the time, and the values of exponents α1 and α2 are influenced by the viscous force. The values of pre-factors m_(1) and m_(2) are negatively correlated with the capillary number. In the rapid pinch-off stage, the thinning of the bubble neck is predominated by the surface tension, and the minimum width of the bubble neck can be scaled with the remaining time as power-law. The propagation of the bubble tip can be characterized by the power law between the movement distance and the time, with decreasing exponent as increased liquid viscosity.
文摘The present work discusses both the linear and nonlinear stability conditions of a viscous falling film down the outer surface of a solid vertical cylinder which moves in the direction of its axis with a constant velocity. After studying the linear conditions, a generalized nonlinear kine- matic model is then derived to present the physical system. Applying the boundary conditions, analytical solutions are obtained using the long-wave perturbation method. In the first step, the normal mode method is used to characterize the linear behaviors. In the second step, the nonlinear film flow model is solved by using the method of multiple scales, to obtain Ginzburg-Landau equation. The influence of some physical parameters is discussed in both linear and nonlinear steps of the problem, and the results are displayed in many plots showing the stability criteria in various param- eter planes.
基金the National Natural Science Foundation under Grant No.50579035
文摘A meshless numerical simulation method, the moving-particle semi-implicit method （MPS） is presented in this paper to study the sloshing phenomenon in ocean and naval engineering. As a meshless method, MPS uses particles to replace the mesh in traditional methods, the governing equations are discretized by virtue of the relationship of particles, and the Poisson equation of pressure is solved by incomplete Cholesky conjugate gradient method （ICCG）, the free surface is tracked by the change of numerical density. A numerical experiment of viscous liquid sloshing tank was presented and compared with the result got by the difference method with the VOF, and an additional modification step was added to make the simulation more stable. The results show that the MPS method is suitable for the simulation of viscous liquid sloshing, with the advantage in arranging the particles easily, especially on some complex curved surface.
基金Supported by Fundamental Research Funds for the Central Universities(Grant No.HEUCFT1001)Ph.D Programs Foundation of Ministry of Education of China(Grant No.10702016)
文摘The computational fluid dynamics （CFD） method is used to numerically simulate a propeller wake flow field in open water. A sub-domain hybrid mesh method was adopted in this paper. The computation domain was separated into two sub-domains, in which tetrahedral elements were used in the inner domain to match the complicated geometry of the propeller, while hexahedral elements were used in the outer domain. The mesh was locally refined on the propeller surface and near the wake flow field, and a size function was used to control the growth rate of the grid. Sections at different axial location were used to study the spatial evolution of the propeller wake in the region ranging from the disc to one propeller diameter （D） downstream. The numerical results show that the axial velocity fluctuates along the wake flow; radial velocity, which is closely related to vortices, attenuates strongly. The trailing vortices interact with the tip vortex at the blades＇ trailing edge and then separate. The strength of the vortex shrinks rapidly, and the radius decreases 20% at one diameter downstream.
基金Project(50778077) supported by the National Natural Science Foundation of ChinaProject(50925828) supported by the National Science Foundation for Distinguished Young Scholars of China
文摘The behavior of viscous fluid damper applied in coupling structures subjected to near-fault earthquake was studied.The structural nonlinearity was characterized by Bouc-Wen model and several near-fault ground motions were simulated by the combination of a recorded earthquake(background ground motion) with equivalent velocity pulses that possess near-fault features.Extensive parametric studies were carried out to find the appropriate damping coefficient.Performances of viscous fluid dampers were demonstrated by the relationship between the force and displacement,the maximal damper force and stroke.The control performances were demonstrated in terms of the response reductions of adjacent structures.The results show that the dynamic responses of adjacent structures are mitigated greatly.Proper damping coefficients of connecting fluid dampers have a small difference,while adjacent structures under different near-fault ground motions with the same peak acceleration.The maximum force of damper is about 0.8 MN,and the maximum damper stroke is about ±550 mm.Satisfied viscous fluid dampers can be produced according to the current manufacturing skills.
文摘In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper＇s initial stroke as it moves away from its neutral position. This phenomenon is referred to as the effect of ＂deadzone＂. The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect ofdeadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers. An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 3 5 6 for calculation of equivalent damping if a deadzone is to be considered.
文摘We discuss the effects of the surface slip on streamline patterns and their bifurcations for the peristaltic transport of a Newtonian fluid. The flow is in a two-dimensional symmetric channel or an axisymmetric tube. An exact expression for the stream function is obtained in the wave frame under the assumptions of long wavelength and low Reynolds number for both cases. For the discussion of the particle path in the wave frame, a system of nonlinear autonomous differential equations is established and the methods of dynamical systems are used to discuss the local bifurcations and their topological changes. Moreover, all types of bifurcations and their topological changes are discussed graphically. Finally, the global bifurcation diagram is used to summarize the bifurcations.
基金This work was supported by the National Key R&D Program of China(Grant No.2020YFA0211400)the State Key Program of the National Natural Science Foundation of China(Grant No.11834008)+2 种基金the National Natural Science Foundation of China(Grant Nos.12174192 and 11774167)the State Key Laboratory of Acoustics,Chinese Academy of Science(Grant No.SKLA202210)the Key Laboratory of Underwater Acoustic Environment,Chinese Academy of Sciences(Grant No.SSHJ-KFKT-1701).
文摘Acoustofluidic technology combines acoustic and microfluidic technologies to realize particle manipulation in microchannels driven by acoustic waves,and the acoustic radiation force(ARF)with boundaries is important for particle manipulation in an acoustofluidic device.In the work reported here,the ARF on a free cylinder immersed in a viscous fluid with an incident plane wave between two impedance boundaries is derived analytically and calculated numerically.The influence of multiple scattering between the particle and the impedance boundaries is described by means of image theory,the finite-series method,and the translational addition theorem,and multiple scattering is included partly in image theory.The ARF on a free rigid cylinder in a viscous fluid is analyzed by numerical calculation,with consideration given to the effects of the distances from cylinder edge to boundaries,fluid viscosity,cylinder size,and boundary reflectivity.The results show that the interaction between the two boundaries and the cylinder makes the ARF change more violently with different frequencies,while increasing the viscosity can reduce the amplitude of the ARF in boundary space.This study provides a theoretical basis for particle manipulation by the ARF in acoustofluidics.
文摘Free convection of a viscous electrically conducting liquid past a vertical stretching surface is investigated in the presence of a transverse magnetic field.Natural convection is driven by both thermal and solutal buoyancy.The original partial differential equations governing the problem are turned into a set of ordinary differential equations through a similar variables transformation.This alternate set of equations is solved through a Differential Transform Method(DTM)and the Pade approximation.The response of the considered physical system to the non-dimensional parameters accounting for the relative importance of different effects is assessed considering different situations.
文摘Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dampers.Two fluid viscous dampers were designed based on CFD models.The first device was a linear viscous damper with straight orifices.The second was a nonlinear viscous damper containing a one-way pressure-responsive valve inside its orifices.Both dampers were detailed based on CFD simulations,and their internal fluid flows were investigated.Full-scale specimens of both dampers were manufactured and tested under dynamic loads.According to the tests results,both dampers demonstrate stable cyclic behaviors,and as expected,the nonlinear damper generally tends to dissipate more energy compared to its linear counterpart.Good compatibility was achieved between the experimentally measured damper force-velocity curves and those estimated from CFD analyses.Using a thermography camera,a rise in temperature of the dampers was measured during the tests.It was found that output force of the manufactured devices was virtually independent of temperature even during long duration loadings.Accordingly,temperature dependence can be ignored in CFD models,because a reliable temperature compensator mechanism was used(or intended to be used)by the damper manufacturer.
文摘This paper treats the numerical calculation of a steady two-dimensional viscous flow past a flexible membrane. Both edges of the membrane are fixed in the flow and its chord is set normal to the flow. The numerical calculations of the Navier-Stokes equation based on a finite difference method and a relaxation method are carried out for several values of the membrane tension in cases when the Reynolds numbers are 5, 10 and 20. It is found that the membrane tension has a minimum value below which there is no steady shape of the membrane. Two different shapes of the membrane are possible at a given value of tension: the one is of small deformation, while the other a large deformation. There appear twin vortices in the concave region of the membrane shape if its deformation increases to a certain extent.
