Owing to the strong coupling among the hydrodynamic forces,aerodynamic forces and motion of amphibious aircraft during the water takeoff process,the water takeoff performance is difficult to calculate accurately and q...Owing to the strong coupling among the hydrodynamic forces,aerodynamic forces and motion of amphibious aircraft during the water takeoff process,the water takeoff performance is difficult to calculate accurately and quickly.Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls,a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff.A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle,flight velocity and other parameters during water takeoff.Combined with the aerodynamic model,engine thrust model and aircraft motion model,a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff,and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight.Typical performance indicators,such as the liftoff time and liftoff distance,can be obtained via digital virtual flight calculations.A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%,which verifies the correctness and accuracy of the proposed method.This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes,and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.展开更多
Circulation Control(CC) realizes rudderless flight control by driving compressed air jet to generate a virtual rudder surface, which significantly improves low detectability. The layout plan of combined control rudder...Circulation Control(CC) realizes rudderless flight control by driving compressed air jet to generate a virtual rudder surface, which significantly improves low detectability. The layout plan of combined control rudder surface is proposed based on the tailless flying wing aircraft. The closed-loop jet actuator system and stepless rudder surface switching control strategy are used to quantitatively study the control characteristics of circulation actuator for pitch and roll attitude through 3-DOF virtual flight test in a wind tunnel with a powered model at wind speed of 40 m/s. The results show that the combined use of circulation actuators can achieve bidirectional continuous and stable control of the aircraft’s pitch and roll attitude, with the maximum pitch rate of 12.3(°)/s and the maximum roll rate of 21.5(°)/s;the response time of attitude angular rate varying with the jet pressure ratio is less than 0.02 s, which can satisfy the control response requirements of aircraft motion stability for the control system;the jet rudder surface has a strong moment control ability, and the pitch moment of the jet elevator with a pressure ratio of 1.28 is the same as that of the mechanical elevator with 28° rudder deflection, which can expand the flight control boundary.展开更多
As one of the promising configurations of the next generation of commercial aircraft,research on departure characteristics of the Blended-Wing-Body(BWB)is of great signification to safe flight limits.A three-degree-of...As one of the promising configurations of the next generation of commercial aircraft,research on departure characteristics of the Blended-Wing-Body(BWB)is of great signification to safe flight limits.A three-degree-of-freedom(3-DOF)virtual flight test in a wind tunnel has been implemented for a candidate configuration to predict the departure characteristics.The support mechanism,the test model and the control law of the virtual flight test are introduced.In order to show the relationship between virtual flight test and actual flight test,the similarity criterion is also given.In open loop,the model has mild oscillations in the longitudinal and lateral directions,which are stable in closed-loop.The effect of flight control has been verified in virtual flight and actual subscale flight test.The analysis of system identification results indicate that the model has a good response to the excitation signal,and the response is in reasonable agreement with the flight test.Finally,the virtual flight departure test results are compared with the flight test.It shows that there is a good correspondence between the angle of attack and the elevator deflection at departure.This gives promising evidence of the practicability of virtual flight testing to predict departure of a BWB.展开更多
An underconstrained cable-driven parallel robot(CDPR)suspension system was designed for a virtual flight testing(VFT)model.This mechanism includes two identical upper and lower kinematic chains,each of which comprises...An underconstrained cable-driven parallel robot(CDPR)suspension system was designed for a virtual flight testing(VFT)model.This mechanism includes two identical upper and lower kinematic chains,each of which comprises a cylindrical pair,rotating pair,and cable parallelogram.The model is pulled via two cables at the top and bottom and fixed by a yaw turntable,which can realize free coupling and decoupling with three rotational degrees of freedom of the model.First,the underconstrained CDPR suspension system of the VFT model was designed according to the mechanics theory,the degrees of freedom were verified,and the support platform was optimized to realize the coincidence between the model’s center of mass and the rotation center of the mechanism during the motion to ensure the stability of the support system.Finally,kinematic and dynamical modeling of the underconstrained CDPR suspension system was conducted;the system stiffness and stability criteria were deduced.Thus,the modeling of an underconstrained,reconfigurable,passively driven CDPR was understood comprehensively.Furthermore,dynamic simulations and experiments were used to verify that the proposed system meets the support requirements of the wind tunnel-based VFT model.This study serves as the foundation for subsequent wind tunnel test research on identifying the aerodynamic parameters of aircraft models,and also provides new avenues for the development of novel support methods for thewind tunnel testmodel.展开更多
In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of ＂design for operation＂ is proposed...In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of ＂design for operation＂ is proposed, which takes basic man-object interaction task, complex collaborative operation and large-scale joint operation into account. The corresponding general architecture of evaluation criteria is also depicted. Then a virtual simulation-based approach to implement the evaluations at three hierarchy levels is mainly analyzed with a detailed example, which validates the feasibility and effectiveness of evaluation architecture. Finally, extending the virtual simulation architecture from design to operation training is discussed.展开更多
In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a...In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.展开更多
Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical sol...Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical solution, dynamic unstructured nested mesh assembly method and numerical solution method of flight mechanics equation. On this basis, a virtual flight simulation platform integrating pneumatics, motion and control is established. Based on this virtual flight simulation platform, F-16 aircraft is simulated by high angle of attack pull-up flight mode and multi-channel roll pull-up coupling flight mode. Finally, the influence of rudder on the yaw control channel is investigated. The results show that the numerical virtual flight simulation platform established in this paper has the ability to simulate maneuvering flight of aircraft.展开更多
文摘Owing to the strong coupling among the hydrodynamic forces,aerodynamic forces and motion of amphibious aircraft during the water takeoff process,the water takeoff performance is difficult to calculate accurately and quickly.Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls,a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff.A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle,flight velocity and other parameters during water takeoff.Combined with the aerodynamic model,engine thrust model and aircraft motion model,a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff,and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight.Typical performance indicators,such as the liftoff time and liftoff distance,can be obtained via digital virtual flight calculations.A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%,which verifies the correctness and accuracy of the proposed method.This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes,and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.
基金supported by the Equipment Pre-research Common Technology Project,China(No.41406010101).
文摘Circulation Control(CC) realizes rudderless flight control by driving compressed air jet to generate a virtual rudder surface, which significantly improves low detectability. The layout plan of combined control rudder surface is proposed based on the tailless flying wing aircraft. The closed-loop jet actuator system and stepless rudder surface switching control strategy are used to quantitatively study the control characteristics of circulation actuator for pitch and roll attitude through 3-DOF virtual flight test in a wind tunnel with a powered model at wind speed of 40 m/s. The results show that the combined use of circulation actuators can achieve bidirectional continuous and stable control of the aircraft’s pitch and roll attitude, with the maximum pitch rate of 12.3(°)/s and the maximum roll rate of 21.5(°)/s;the response time of attitude angular rate varying with the jet pressure ratio is less than 0.02 s, which can satisfy the control response requirements of aircraft motion stability for the control system;the jet rudder surface has a strong moment control ability, and the pitch moment of the jet elevator with a pressure ratio of 1.28 is the same as that of the mechanical elevator with 28° rudder deflection, which can expand the flight control boundary.
基金supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province of China(No.KYCX18_0250)a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,a Professional Competence Foundation of Shanghai Aircraft Design+1 种基金Research Institute,Key Laboratory of Unsteady AerodynamicsFlow Control,Ministry oflndus-try and Information Technology and the Fundamental Research Funds for the Central Universities(No.NP 2020403)and National Natural Science Foundation of China(12072155).
文摘As one of the promising configurations of the next generation of commercial aircraft,research on departure characteristics of the Blended-Wing-Body(BWB)is of great signification to safe flight limits.A three-degree-of-freedom(3-DOF)virtual flight test in a wind tunnel has been implemented for a candidate configuration to predict the departure characteristics.The support mechanism,the test model and the control law of the virtual flight test are introduced.In order to show the relationship between virtual flight test and actual flight test,the similarity criterion is also given.In open loop,the model has mild oscillations in the longitudinal and lateral directions,which are stable in closed-loop.The effect of flight control has been verified in virtual flight and actual subscale flight test.The analysis of system identification results indicate that the model has a good response to the excitation signal,and the response is in reasonable agreement with the flight test.Finally,the virtual flight departure test results are compared with the flight test.It shows that there is a good correspondence between the angle of attack and the elevator deflection at departure.This gives promising evidence of the practicability of virtual flight testing to predict departure of a BWB.
文摘An underconstrained cable-driven parallel robot(CDPR)suspension system was designed for a virtual flight testing(VFT)model.This mechanism includes two identical upper and lower kinematic chains,each of which comprises a cylindrical pair,rotating pair,and cable parallelogram.The model is pulled via two cables at the top and bottom and fixed by a yaw turntable,which can realize free coupling and decoupling with three rotational degrees of freedom of the model.First,the underconstrained CDPR suspension system of the VFT model was designed according to the mechanics theory,the degrees of freedom were verified,and the support platform was optimized to realize the coincidence between the model’s center of mass and the rotation center of the mechanism during the motion to ensure the stability of the support system.Finally,kinematic and dynamical modeling of the underconstrained CDPR suspension system was conducted;the system stiffness and stability criteria were deduced.Thus,the modeling of an underconstrained,reconfigurable,passively driven CDPR was understood comprehensively.Furthermore,dynamic simulations and experiments were used to verify that the proposed system meets the support requirements of the wind tunnel-based VFT model.This study serves as the foundation for subsequent wind tunnel test research on identifying the aerodynamic parameters of aircraft models,and also provides new avenues for the development of novel support methods for thewind tunnel testmodel.
文摘In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design, a tri-hierarchical task classification model of ＂design for operation＂ is proposed, which takes basic man-object interaction task, complex collaborative operation and large-scale joint operation into account. The corresponding general architecture of evaluation criteria is also depicted. Then a virtual simulation-based approach to implement the evaluations at three hierarchy levels is mainly analyzed with a detailed example, which validates the feasibility and effectiveness of evaluation architecture. Finally, extending the virtual simulation architecture from design to operation training is discussed.
文摘In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.
文摘Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical solution, dynamic unstructured nested mesh assembly method and numerical solution method of flight mechanics equation. On this basis, a virtual flight simulation platform integrating pneumatics, motion and control is established. Based on this virtual flight simulation platform, F-16 aircraft is simulated by high angle of attack pull-up flight mode and multi-channel roll pull-up coupling flight mode. Finally, the influence of rudder on the yaw control channel is investigated. The results show that the numerical virtual flight simulation platform established in this paper has the ability to simulate maneuvering flight of aircraft.
