This paper introduces the design of an IC, which is capable of cross-converting between various DTV(digital television) standards, up to the HDTV (high definition television) resolution. A multi-phase FIR-based filter...This paper introduces the design of an IC, which is capable of cross-converting between various DTV(digital television) standards, up to the HDTV (high definition television) resolution. A multi-phase FIR-based filtering algorithm is developed to perform the video scaling task. A dedicated fast SDRAM interface is designed, providing an economical high-density storage for frame buffer. Film material pre-processing and frame/field rate up-conversion are implemented in the memory control block. All the programmable parameters, such as the filter properties, can be set dynamically at run-time through an I2C interface, making the IC a very flexible system. This design has been verified through an FPGA emulation system.展开更多
A file format for storage of scalable video is proposed. A generic model is presented to enable a codec independent description of scalable video stream. The relationships, especially the dependencies, among sub-strea...A file format for storage of scalable video is proposed. A generic model is presented to enable a codec independent description of scalable video stream. The relationships, especially the dependencies, among sub-streams in a scalable video stream are specified sufficiently and effectively in the proposed model. Complying with the presented scalable video stream model, the file format for scalable video is proposed based on ISO Base Media File Format, which is simple and flexible enough to address the demands of scalable video application as well as the non-scalable ones.展开更多
This paper aims to study the oscillation of a sparkgenerated submerged bubble located near or inside a circular aperture made in a flat plate using high-speed visualization technique. In the case of a bubble oscillati...This paper aims to study the oscillation of a sparkgenerated submerged bubble located near or inside a circular aperture made in a flat plate using high-speed visualization technique. In the case of a bubble oscillating near an aperture the initial free surface of the water was set at the bottom surface of the plate. The effects of aperture size and bubblefree surface distance on the bubble behavior as well as on the ensuing droplet dynamics are investigated. It was found that the direction of the bubble reentrant jet was towards the aperture or away from it respectively when the normalized aperture size was smaller or greater than a certain critical value. In addition, a toroidal vortex ring was observed to form, which rotated inwards as it moved away from the aperture. It was also found that if the bubble was incepted at a distance sufficiently away from a supercritical size aperture a single droplet could be produced. In the case of a bub- ble initiated in the middle of a circular aperture submerged just beneath the water free surface, the bubble was found to take the shape of an ellipsoid during its expansion. Then a reentrant jet was initiated and pierced the bubble from its top side.展开更多
In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite mo...In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite morphology in Cu-Zn-Al SMA,i.e. plate, spean bamboo, noose, round-spot, line and dot-like martensites. During transformation and inverse-transformation, the thermoelastic martensites were rising and falling, growing and shrinking, splitting and merping. The growth patterns of thermoelastic martensite were divided into three types: fast growing, very slow ex-pansion and uniform automatic growth. Automatic growth appeared when ageing at a temperature below Ms. The result, for the first time, coofirmed Olson and Cohen,s suggestion that thermoelastic martensite may be automatically grown when ageing be-low Ms. With increasing numbers of thermal cycling, both the memory recovery ratio (% )and memory recoverp degradation (%) degraded logarithmically. The degrada-tion was steep in the initial stage and then became more and more gradual in the middle and the final stages caused by the stabilisation of martensite. In the initial stage, vacancies assumed the controlling role, while dislocations took the major role in other stages. The martensite transformation caused the intedeces to become bent and blurmd, but with increasing cycling numbers, the movements of interface had the same degradation effects as the memory recovery ratio curves. Under these conditions, we also found the martensites on one side of the intedece became reorientated and par-allel to the intedece. It was therefore concluded that the movement degradation of the interface and the appearance of bamboo like martensite induced the degradation of two way shape memory effect (TWMP).展开更多
文摘This paper introduces the design of an IC, which is capable of cross-converting between various DTV(digital television) standards, up to the HDTV (high definition television) resolution. A multi-phase FIR-based filtering algorithm is developed to perform the video scaling task. A dedicated fast SDRAM interface is designed, providing an economical high-density storage for frame buffer. Film material pre-processing and frame/field rate up-conversion are implemented in the memory control block. All the programmable parameters, such as the filter properties, can be set dynamically at run-time through an I2C interface, making the IC a very flexible system. This design has been verified through an FPGA emulation system.
基金Project supported by the National Natural Science Foundation of China (No. 60572104) and the Natural Science Foundation (No. 40410031) of Beijing, China.
文摘A file format for storage of scalable video is proposed. A generic model is presented to enable a codec independent description of scalable video stream. The relationships, especially the dependencies, among sub-streams in a scalable video stream are specified sufficiently and effectively in the proposed model. Complying with the presented scalable video stream model, the file format for scalable video is proposed based on ISO Base Media File Format, which is simple and flexible enough to address the demands of scalable video application as well as the non-scalable ones.
文摘This paper aims to study the oscillation of a sparkgenerated submerged bubble located near or inside a circular aperture made in a flat plate using high-speed visualization technique. In the case of a bubble oscillating near an aperture the initial free surface of the water was set at the bottom surface of the plate. The effects of aperture size and bubblefree surface distance on the bubble behavior as well as on the ensuing droplet dynamics are investigated. It was found that the direction of the bubble reentrant jet was towards the aperture or away from it respectively when the normalized aperture size was smaller or greater than a certain critical value. In addition, a toroidal vortex ring was observed to form, which rotated inwards as it moved away from the aperture. It was also found that if the bubble was incepted at a distance sufficiently away from a supercritical size aperture a single droplet could be produced. In the case of a bub- ble initiated in the middle of a circular aperture submerged just beneath the water free surface, the bubble was found to take the shape of an ellipsoid during its expansion. Then a reentrant jet was initiated and pierced the bubble from its top side.
文摘In this paper, an in situ metallographic video system was used to study the morphology in Cu-Zn-Al shape memory alloy (SMA) during thermal cycling phase tmnsforma-tion. There are seven different types of martensite morphology in Cu-Zn-Al SMA,i.e. plate, spean bamboo, noose, round-spot, line and dot-like martensites. During transformation and inverse-transformation, the thermoelastic martensites were rising and falling, growing and shrinking, splitting and merping. The growth patterns of thermoelastic martensite were divided into three types: fast growing, very slow ex-pansion and uniform automatic growth. Automatic growth appeared when ageing at a temperature below Ms. The result, for the first time, coofirmed Olson and Cohen,s suggestion that thermoelastic martensite may be automatically grown when ageing be-low Ms. With increasing numbers of thermal cycling, both the memory recovery ratio (% )and memory recoverp degradation (%) degraded logarithmically. The degrada-tion was steep in the initial stage and then became more and more gradual in the middle and the final stages caused by the stabilisation of martensite. In the initial stage, vacancies assumed the controlling role, while dislocations took the major role in other stages. The martensite transformation caused the intedeces to become bent and blurmd, but with increasing cycling numbers, the movements of interface had the same degradation effects as the memory recovery ratio curves. Under these conditions, we also found the martensites on one side of the intedece became reorientated and par-allel to the intedece. It was therefore concluded that the movement degradation of the interface and the appearance of bamboo like martensite induced the degradation of two way shape memory effect (TWMP).
