Vibration cutting has emerged as a promising method for creating surface functional microstructures.However,achieving precise tool setting is a time-consuming process that significantly impacts process efficiency.This...Vibration cutting has emerged as a promising method for creating surface functional microstructures.However,achieving precise tool setting is a time-consuming process that significantly impacts process efficiency.This study proposes an intelligent approach for tool setting in vibration cutting using machine vision and hearing,divided into two steps.In the first step,machine vision is employed to achieve rough precision in tool setting within tens of micrometers.Subsequently,in the second step,machine hearing utilizes sound pickup to capture vibration audio signals,enabling fine tool adjustment within 1μm precision.The relationship between the spectral intensity of vibration audio and cutting depth is analyzed to establish criteria for tool–workpiece contact.Finally,the efficacy of this approach is validated on an ultra-precision platform,demonstrating that the automated tool-setting process takes no more than 74 s.The total cost of the vision and hearing sensors is less than$1500.展开更多
Titanium alloys are widely used in the aviation and aerospace industries due to their unique mechanical and physical properties.Specifically,thin-walled titanium(Ti)cylinders have received increasing attention for the...Titanium alloys are widely used in the aviation and aerospace industries due to their unique mechanical and physical properties.Specifically,thin-walled titanium(Ti)cylinders have received increasing attention for their applications as rocket engine casings,aircraft landing gear,and aero-engine hollow shaft due to their observed improvement in the thrust-to-weight ratio.However,the conventional cutting(CC)process is not appropriate for thin-walled Ti cylinders due to its low thermal conductivity,high strength,and low stiffness.Instead,high-speed ultrasonic vibration cutting(HUVC)assisted processing has recently proved highly effective for Ti-alloy machining.In this study,HUVC technology is employed to perform external turning of a thinwalled Ti cylinder,which represents a new application of HUVC.First,the kinematics,tool path,and dynamic cutting thickness of HUVC are evaluated.Second,the phenomenon of mode-coupling chatter is analyzed to determine the effects and mechanism of HUVC by establishing a critical cutting thickness model.HUVC can increase the critical cutting thickness and effectively reduce the average cutting force,thus reducing the energy intake of the system.Finally,comparison experiments are conducted between HUVC and CC processes.The results indicate that the diameter error rate is 10%or less for HUVC and 51%for the CC method due to a 40%reduction in the cutting force.In addition,higher machining precision and better surface roughness are achieved during thin-walled Ti cylinder manufacturing using HUVC.展开更多
Large-size thin-walled curved surface parts of pure iron are crucial in aerospace,national defense,energy and precision physical experiments.However,the high machining accuracy and surface quality are difficult to ach...Large-size thin-walled curved surface parts of pure iron are crucial in aerospace,national defense,energy and precision physical experiments.However,the high machining accuracy and surface quality are difficult to achieve due to the serious tool wear and deformation when machining the parts with conventional cutting tools.In this paper,an elliptical vibration cutting(EVC)with active cutting edge shift(ACES)based on a long arbor vibration device is proposed for ultraprecision machining the pure iron parts by using diamond tool.Compared with cutting at a fixed cutting edge,the influence of ACES on the EVC was analyzed.Experiments in EVC of pure iron with ACES were conducted.The evolutions of the surface roughness,surface topography,and chip morphology with tool wear in EVC with ACES are revealed.The reasonable parameters of ultraprecision machining the pure iron parts by EVC with ACES were determined.It shows that the ACES has a slight influence on the machined surface roughness and surface topography.The diamond tool life can be significantly prolonged in EVC of pure iron with ACES than that with a fixed cutting edge,so that high profile accuracy and surface quality could be obtained even at higher nominal cutting speed.A typical thin-walled curved surface pure iron part with diameter φ240 mm,height 122 mm,and wall thickness 2 mm was fabricated by the presented method,and its profile error and surface roughness achieved PV 2.2μm and Ra less than 50 nm,respectively.展开更多
The cutting performance of particle reinforced meta ll ic matrix composites (PRMMCs) SiC p/Al in ultrasonic vibration cutting and comm on cutting with carbide tools and PCD tools was experimentally researched in the p...The cutting performance of particle reinforced meta ll ic matrix composites (PRMMCs) SiC p/Al in ultrasonic vibration cutting and comm on cutting with carbide tools and PCD tools was experimentally researched in the paper. The changing rules of chip shape, deformation coefficient, shear angle a nd surface residual stress were presented by ultrasonic vibration cutting. Resul ts show: when adopting common cutting, spiral chip with smaller curl radius will be obtained. The chip with zigzag contour is short and thick. There are lots of sheet cracking both on the face of the chip and on the machined surface. That i s to say, the cutting process of metallic matrix composites(MMCs) is not all lik e the cutting process of plastic material. It is akin to the breaking process of brittle material. By comparison, when adopting ultrasonic cutting, because tool contacts with workpiece intermittently in high frequency, deformation of chip i s small, loose spiral chip with larger curl radius is long and thin. The phenome non is just similar to vibration cutting of plastic material. But the chip still belongs to plastic or semi-plastic segmental chip due to the structure charact eristics of the material itself. Furthermore, the tangential residual compressio n stress of vibration cutting is larger than that of common cutting, axial resid ual stress has a relation to the feed rate and residual stress does not changes obviously with cutting depth and they are in the same order of magnitude on the whole. According to the test result analyzing, the following conclusions are put forward: 1) The extruding deformation is serious in common cutting PRMMCs, defo rmation of it’s chip is larger, and the chip with lesser curl radius is short. Whereas, the deformation of chip in vibration cutting PRMMCs is lesser, the curl radius is bigger, and the loose chips are obtained at every turn. 2) The cuttin g deformation coefficient of chip in vibration cutting is lesser than that in co mmon cutting, however the shear angle is bigger. 3) The tangential residual compression stress of vibration cutting is larger than that of common cutting, a nd residual stress does not change obviously with cutting depth, they are in the same order of magnitude on the whole.展开更多
To benefit tissue removal and postoperative rehabilitation,increased efficiency and accuracy and reduced operating force are strongly required in the osteotomy.A novel elliptical vibration cutting(EVC)has been introdu...To benefit tissue removal and postoperative rehabilitation,increased efficiency and accuracy and reduced operating force are strongly required in the osteotomy.A novel elliptical vibration cutting(EVC)has been introduced for bone cutting compared with conventional cutting(CC)in this paper.With the assistance of high-speed microscope imaging and the dynamometer,the material removals of cortical bone and their cutting forces from two cutting regimes were recorded and analysed comprehensively,which clearly demonstrated the chip morphology improvement and the average cutting force reduction in the EVC process.It also revealed that the elliptical vibration of the cutting tool could promote fracture propagation along the shear direction.These new findings will be of important theoretical and practical values to apply the innovative EVC process to the surgical procedures of the osteotomy.展开更多
Nanoscale surface roughness of tungsten heavy alloy components is required in the nuclear industry and precision instruments.In this study,a high-performance ultrasonic elliptical vibration cutting(UEVC)system is deve...Nanoscale surface roughness of tungsten heavy alloy components is required in the nuclear industry and precision instruments.In this study,a high-performance ultrasonic elliptical vibration cutting(UEVC)system is developed to solve the precision machining problem of tungsten heavy alloy.A new design method of stepped bending vibration horn based on Timoshenko’s theory is first proposed,and its design process is greatly simplified.The arrangement and working principle of piezoelectric transducers on the ultrasonic vibrator using the fifth resonant mode of bending are analyzed to realize the dual-bending vibration modes.A cutting tool is installed at the end of the ultrasonic vibration unit to output the ultrasonic elliptical vibration locus,which is verified by finite element method.The vibration unit can display different three-degree-of-freedom(3-DOF)UEVC characteristics by adjusting the corresponding position of the unit and workpiece.A dual-channel ultrasonic power supply is developed to excite the ultrasonic vibration unit,which makes the UEVC system present the resonant frequency of 41 kHz and the maximum amplitude of 14.2μm.Different microtopography and surface roughness are obtained by the cutting experiments of tungsten heavy alloy hemispherical workpiece with the UEVC system,which validates the proposed design’s technical capability and provides optimization basis for further improving the machining quality of the curved surface components of tungsten heavy alloy.展开更多
Freshwater purification from wasted water and seawater is crucial in addressing the global problem of water scarcity.Porous fiber felt with a micro/nanostructure emerges as an efficient approach for water purification...Freshwater purification from wasted water and seawater is crucial in addressing the global problem of water scarcity.Porous fiber felt with a micro/nanostructure emerges as an efficient approach for water purification;however,its production usually relies on chemical postprocessing to create micro/nano structures on the fiber surface,which might pollute the environment.This study proposed an ecofriendly method to produce micro/nanostructured copper fiber felt without chemical treatment.First,a new transverse-feeding vibration cutting is proposed to fabricate micro/nanostructured fibers with controllable structure characteristics.Through the sintering of the structured fibers without postprocessing,the fiber felt can be produced in an ecofriendly way and exhibit special wettability and excellent photothermal properties.Felt-based freshwater purification,including oil–water separation and solar-driven seawater desalination,can be realized effectively.Results show an oil–water separation efficiency of>90%and a high evaporation rate of water of>1.08 kg m^(−2)h^(−1)at 73 mW cm^(−2)are achieved,demonstrating the application prospect of the produced fiber felt.展开更多
Ultrasonic elliptical vibration cutting(UEVC)with clockwise elliptical vibration has made notable achievements in precision machining;however,its critical cutting speed limits its application to low-speed machining ta...Ultrasonic elliptical vibration cutting(UEVC)with clockwise elliptical vibration has made notable achievements in precision machining;however,its critical cutting speed limits its application to low-speed machining tasks.Meanwhile,rotary ultrasonic elliptical machining(RUEM)with clockwise elliptical vibration has been validated as an effective high-speed cutting technology.Unfortunately,conventional RUEM leads to increased surface roughness.To address this issue and enhance machining quality,we propose a novel RUEM method employing an anticlockwise vibration direction,called anticlockwise rotary ultrasonic elliptical machining(ARUEM).The mechanisms of surface formation and subsurface strengthening for ARUEM are analyzed.Experimental validations were performed on Ti-6Al-4V alloy,revealing that ARUEM achieved substantially lower ridge heights and up to a 50%reduction in surface roughness compared to conventional RUEM.Additionally,relative to conventional milling,ARUEM resulted in up to 122.6%thicker plastic deformation layers,53.4%higher surface residual compressive stress,and 19.3%greater surface micro-hardness.This study showcases a promising method for high-performance milling of Ti-6Al-4V,offers new insights into RUEM by examining the influence of vibration direction,and enhances understanding of surface formation and subsurface strengthening in the ARUEM method.展开更多
On-machine inspection has a significant impact on improving high-precision and efficient machining of sculptured surfaces. Due to the lack of machining information and the inability to adapt the parameters to the dyna...On-machine inspection has a significant impact on improving high-precision and efficient machining of sculptured surfaces. Due to the lack of machining information and the inability to adapt the parameters to the dynamic cutting conditions, theoretical modeling of profile inspection usually leads to insufficient adaptation, which causes inaccuracy problems. To address the above issues, a novel coupled model for profile inspection is proposed by combining the theoretical model and the data-driven model. The key process is to first realize local feature extraction based on the acquired vibration signals. The hybrid sampling model, which fuses geometric feature terms and vibration feature terms, is modeled by the lever principle. Then, the weight of each feature term is adaptively assigned by a multi-objective multi-verse optimizer.Finally, an inspection error compensation model based on the attention mechanism considering different probe postures is proposed to reduce the impact of pre-travel and radius errors on inspection accuracy. The anisotropy of the probe system error and its influence mechanism on the inspection accuracy are analyzed quantitatively and qualitatively. Compared with the previous models, the proposed hybrid profile inspection model can significantly improve the accuracy and efficiency of on-machine sampling. The proposed compensation model is able to correct the inspection errors with better accuracy. Simulations and experiments demonstrate the feasibility and validity of the proposed methods. The proposed model and corresponding new findings contribute to high-precision and efficient on-machine inspection, and help to understand the coupling mechanism of inspection errors.展开更多
The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time...The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time-delay controller is developed based on discrete optimal control method for the turning vibrations control. Numerical simulations are carried out to verify the efficiency of the controller. Results indicate the designed controller can suppress the cutting vibration efficiently and improve the stability of the cutting processes. The influence of designed time-delay and sampling time on the control performance is also discussed.展开更多
High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effect...High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing techniques.This study proposes a novel cutting-based process,namely elliptical vibration chiseling(EV-chiseling),for the high-efficiency texturing of surface microstructures with an ultrahigh aspect ratio.Unlike conventional cutting,EV-chiseling superimposes a microscale EV on a backward-moving tool.The tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material deformation.Thanks to the tool’s backward movement,the chip is left on the material surface to form a microstructure rather than falling off.Since one microstructure is generated in one vibration cycle,the process can be highly efficient using ultrafast(>1 kHz)tool vibration.A finite element analysis model is established to explore the process mechanics of EV-chiseling.Next,a mechanistic model of the microstructured surface generation is developed to describe the microstructures’aspect ratio dependency on the process parameters.Then,surface texturing tests are performed on copper to verify the efficacy of EV-chiseling.Uniformed micro ribs with a spacing of 1–10μm and an aspect ratio of 2–5 have been successfully textured on copper.Compared with the conventional EV-cutting that uses a forward-moving tool,EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 times.The experimental results also verify the accuracy of the developed surface generation model of microstructures.Finally,the effects of elliptical trajectory,depth of cut,tool shape,and tool edge radius on the surface generation of micro ribs have been discussed.展开更多
We numerically simulated and experimentally studied the interfacialcarbon diffusion between diamond tooland workpiece materials.A diffusion modelwith respect to carbon atoms of diamond toolpenetrating into chips and m...We numerically simulated and experimentally studied the interfacialcarbon diffusion between diamond tooland workpiece materials.A diffusion modelwith respect to carbon atoms of diamond toolpenetrating into chips and machined surface was established.The numericalsimulation results of the diffusion process revealthat the distribution laws of carbon atoms concentration have a close relationship with the diffusion distance,the diffusion time,and the originalcarbon concentration of the work material.In addition,diamond face cutting tests of die steels with different carbon content are conducted at different depth of cuts and feed rates to verify the previous simulation results.The micro-morphology of the chips is detected by scanning electron microscopy.Energy dispersive X-ray analysis was proposed to investigate the change in carbon content of the chips surface.The experimentalresults of this work are of benefit to a better understanding on the diffusion wear mechanism in single crystaldiamond cutting of ferrous metals.Moreover,the experimentalresults show that the diffusion wear of diamond could be reduced markedly by applying ultrasonic vibration to the cutting toolcompared with conventionalturning.展开更多
基金the financial support for this research provided by the National Natural Science Foundation of China(Grant Nos.52275470,124115301,and 52105458)the Natural Science Foundation of Beijing(Grant No.3222009).
文摘Vibration cutting has emerged as a promising method for creating surface functional microstructures.However,achieving precise tool setting is a time-consuming process that significantly impacts process efficiency.This study proposes an intelligent approach for tool setting in vibration cutting using machine vision and hearing,divided into two steps.In the first step,machine vision is employed to achieve rough precision in tool setting within tens of micrometers.Subsequently,in the second step,machine hearing utilizes sound pickup to capture vibration audio signals,enabling fine tool adjustment within 1μm precision.The relationship between the spectral intensity of vibration audio and cutting depth is analyzed to establish criteria for tool–workpiece contact.Finally,the efficacy of this approach is validated on an ultra-precision platform,demonstrating that the automated tool-setting process takes no more than 74 s.The total cost of the vision and hearing sensors is less than$1500.
基金supported by the Defense Industrial Technology Development Program of China(No.JCKY2018601C209)。
文摘Titanium alloys are widely used in the aviation and aerospace industries due to their unique mechanical and physical properties.Specifically,thin-walled titanium(Ti)cylinders have received increasing attention for their applications as rocket engine casings,aircraft landing gear,and aero-engine hollow shaft due to their observed improvement in the thrust-to-weight ratio.However,the conventional cutting(CC)process is not appropriate for thin-walled Ti cylinders due to its low thermal conductivity,high strength,and low stiffness.Instead,high-speed ultrasonic vibration cutting(HUVC)assisted processing has recently proved highly effective for Ti-alloy machining.In this study,HUVC technology is employed to perform external turning of a thinwalled Ti cylinder,which represents a new application of HUVC.First,the kinematics,tool path,and dynamic cutting thickness of HUVC are evaluated.Second,the phenomenon of mode-coupling chatter is analyzed to determine the effects and mechanism of HUVC by establishing a critical cutting thickness model.HUVC can increase the critical cutting thickness and effectively reduce the average cutting force,thus reducing the energy intake of the system.Finally,comparison experiments are conducted between HUVC and CC processes.The results indicate that the diameter error rate is 10%or less for HUVC and 51%for the CC method due to a 40%reduction in the cutting force.In addition,higher machining precision and better surface roughness are achieved during thin-walled Ti cylinder manufacturing using HUVC.
基金the financial support from Science Challenge Project(No.TZ2016006-0103-01)National Natural Science Foundation of China(No.51975096 and No.51805498).
文摘Large-size thin-walled curved surface parts of pure iron are crucial in aerospace,national defense,energy and precision physical experiments.However,the high machining accuracy and surface quality are difficult to achieve due to the serious tool wear and deformation when machining the parts with conventional cutting tools.In this paper,an elliptical vibration cutting(EVC)with active cutting edge shift(ACES)based on a long arbor vibration device is proposed for ultraprecision machining the pure iron parts by using diamond tool.Compared with cutting at a fixed cutting edge,the influence of ACES on the EVC was analyzed.Experiments in EVC of pure iron with ACES were conducted.The evolutions of the surface roughness,surface topography,and chip morphology with tool wear in EVC with ACES are revealed.The reasonable parameters of ultraprecision machining the pure iron parts by EVC with ACES were determined.It shows that the ACES has a slight influence on the machined surface roughness and surface topography.The diamond tool life can be significantly prolonged in EVC of pure iron with ACES than that with a fixed cutting edge,so that high profile accuracy and surface quality could be obtained even at higher nominal cutting speed.A typical thin-walled curved surface pure iron part with diameter φ240 mm,height 122 mm,and wall thickness 2 mm was fabricated by the presented method,and its profile error and surface roughness achieved PV 2.2μm and Ra less than 50 nm,respectively.
文摘The cutting performance of particle reinforced meta ll ic matrix composites (PRMMCs) SiC p/Al in ultrasonic vibration cutting and comm on cutting with carbide tools and PCD tools was experimentally researched in the paper. The changing rules of chip shape, deformation coefficient, shear angle a nd surface residual stress were presented by ultrasonic vibration cutting. Resul ts show: when adopting common cutting, spiral chip with smaller curl radius will be obtained. The chip with zigzag contour is short and thick. There are lots of sheet cracking both on the face of the chip and on the machined surface. That i s to say, the cutting process of metallic matrix composites(MMCs) is not all lik e the cutting process of plastic material. It is akin to the breaking process of brittle material. By comparison, when adopting ultrasonic cutting, because tool contacts with workpiece intermittently in high frequency, deformation of chip i s small, loose spiral chip with larger curl radius is long and thin. The phenome non is just similar to vibration cutting of plastic material. But the chip still belongs to plastic or semi-plastic segmental chip due to the structure charact eristics of the material itself. Furthermore, the tangential residual compressio n stress of vibration cutting is larger than that of common cutting, axial resid ual stress has a relation to the feed rate and residual stress does not changes obviously with cutting depth and they are in the same order of magnitude on the whole. According to the test result analyzing, the following conclusions are put forward: 1) The extruding deformation is serious in common cutting PRMMCs, defo rmation of it’s chip is larger, and the chip with lesser curl radius is short. Whereas, the deformation of chip in vibration cutting PRMMCs is lesser, the curl radius is bigger, and the loose chips are obtained at every turn. 2) The cuttin g deformation coefficient of chip in vibration cutting is lesser than that in co mmon cutting, however the shear angle is bigger. 3) The tangential residual compression stress of vibration cutting is larger than that of common cutting, a nd residual stress does not change obviously with cutting depth, they are in the same order of magnitude on the whole.
基金Supported by National Natural Science Foundation of China (Grant Nos.52005199 and 42241149)Shenzhen Fundamental Research Program (Grant Nos.JCYJ20200109150425085 and JCYJ20220818102601004)+2 种基金Shenzhen Science and Technology Program (Grant Nos.JSGG20201103100001004 and JSGG20220831105800001)Research Development Program of China (Grant No.2022YFB4602502)Knowledge Innovation Program of Wuhan-Basic Research (Grant No.2022010801010203)。
文摘To benefit tissue removal and postoperative rehabilitation,increased efficiency and accuracy and reduced operating force are strongly required in the osteotomy.A novel elliptical vibration cutting(EVC)has been introduced for bone cutting compared with conventional cutting(CC)in this paper.With the assistance of high-speed microscope imaging and the dynamometer,the material removals of cortical bone and their cutting forces from two cutting regimes were recorded and analysed comprehensively,which clearly demonstrated the chip morphology improvement and the average cutting force reduction in the EVC process.It also revealed that the elliptical vibration of the cutting tool could promote fracture propagation along the shear direction.These new findings will be of important theoretical and practical values to apply the innovative EVC process to the surgical procedures of the osteotomy.
基金support from the National Natural Science Foundation of China(Grant No.U20A20291)the Xingliao Talent Program of Liaoning Province,China(Grant No.XLYC1907183)the Fundamental Research Funds for the Central Universities,China(Grant No.DUT22ZD201).
文摘Nanoscale surface roughness of tungsten heavy alloy components is required in the nuclear industry and precision instruments.In this study,a high-performance ultrasonic elliptical vibration cutting(UEVC)system is developed to solve the precision machining problem of tungsten heavy alloy.A new design method of stepped bending vibration horn based on Timoshenko’s theory is first proposed,and its design process is greatly simplified.The arrangement and working principle of piezoelectric transducers on the ultrasonic vibrator using the fifth resonant mode of bending are analyzed to realize the dual-bending vibration modes.A cutting tool is installed at the end of the ultrasonic vibration unit to output the ultrasonic elliptical vibration locus,which is verified by finite element method.The vibration unit can display different three-degree-of-freedom(3-DOF)UEVC characteristics by adjusting the corresponding position of the unit and workpiece.A dual-channel ultrasonic power supply is developed to excite the ultrasonic vibration unit,which makes the UEVC system present the resonant frequency of 41 kHz and the maximum amplitude of 14.2μm.Different microtopography and surface roughness are obtained by the cutting experiments of tungsten heavy alloy hemispherical workpiece with the UEVC system,which validates the proposed design’s technical capability and provides optimization basis for further improving the machining quality of the curved surface components of tungsten heavy alloy.
基金Financial support was provided by National Natural Science Foundation of China(Grant No.52275441 and 52105458.)Natural Science Foundation of Beijing(Grant No.3222009)Huaneng Group Science and Technology research project(No:HNKJ22-H105).
文摘Freshwater purification from wasted water and seawater is crucial in addressing the global problem of water scarcity.Porous fiber felt with a micro/nanostructure emerges as an efficient approach for water purification;however,its production usually relies on chemical postprocessing to create micro/nano structures on the fiber surface,which might pollute the environment.This study proposed an ecofriendly method to produce micro/nanostructured copper fiber felt without chemical treatment.First,a new transverse-feeding vibration cutting is proposed to fabricate micro/nanostructured fibers with controllable structure characteristics.Through the sintering of the structured fibers without postprocessing,the fiber felt can be produced in an ecofriendly way and exhibit special wettability and excellent photothermal properties.Felt-based freshwater purification,including oil–water separation and solar-driven seawater desalination,can be realized effectively.Results show an oil–water separation efficiency of>90%and a high evaporation rate of water of>1.08 kg m^(−2)h^(−1)at 73 mW cm^(−2)are achieved,demonstrating the application prospect of the produced fiber felt.
基金supported by the National Natural Science Foundation of China(Nos.91960203 and 52375399)the Chinese Aeronautical Establishment Aeronautical Science Foundation(No.2022Z045051001).
文摘Ultrasonic elliptical vibration cutting(UEVC)with clockwise elliptical vibration has made notable achievements in precision machining;however,its critical cutting speed limits its application to low-speed machining tasks.Meanwhile,rotary ultrasonic elliptical machining(RUEM)with clockwise elliptical vibration has been validated as an effective high-speed cutting technology.Unfortunately,conventional RUEM leads to increased surface roughness.To address this issue and enhance machining quality,we propose a novel RUEM method employing an anticlockwise vibration direction,called anticlockwise rotary ultrasonic elliptical machining(ARUEM).The mechanisms of surface formation and subsurface strengthening for ARUEM are analyzed.Experimental validations were performed on Ti-6Al-4V alloy,revealing that ARUEM achieved substantially lower ridge heights and up to a 50%reduction in surface roughness compared to conventional RUEM.Additionally,relative to conventional milling,ARUEM resulted in up to 122.6%thicker plastic deformation layers,53.4%higher surface residual compressive stress,and 19.3%greater surface micro-hardness.This study showcases a promising method for high-performance milling of Ti-6Al-4V,offers new insights into RUEM by examining the influence of vibration direction,and enhances understanding of surface formation and subsurface strengthening in the ARUEM method.
基金National Natural Science Foundation of China (52375412)Fundamental Research Funds for Central Universities (N2203011)China Scholarship Council Program (202306080057)。
文摘On-machine inspection has a significant impact on improving high-precision and efficient machining of sculptured surfaces. Due to the lack of machining information and the inability to adapt the parameters to the dynamic cutting conditions, theoretical modeling of profile inspection usually leads to insufficient adaptation, which causes inaccuracy problems. To address the above issues, a novel coupled model for profile inspection is proposed by combining the theoretical model and the data-driven model. The key process is to first realize local feature extraction based on the acquired vibration signals. The hybrid sampling model, which fuses geometric feature terms and vibration feature terms, is modeled by the lever principle. Then, the weight of each feature term is adaptively assigned by a multi-objective multi-verse optimizer.Finally, an inspection error compensation model based on the attention mechanism considering different probe postures is proposed to reduce the impact of pre-travel and radius errors on inspection accuracy. The anisotropy of the probe system error and its influence mechanism on the inspection accuracy are analyzed quantitatively and qualitatively. Compared with the previous models, the proposed hybrid profile inspection model can significantly improve the accuracy and efficiency of on-machine sampling. The proposed compensation model is able to correct the inspection errors with better accuracy. Simulations and experiments demonstrate the feasibility and validity of the proposed methods. The proposed model and corresponding new findings contribute to high-precision and efficient on-machine inspection, and help to understand the coupling mechanism of inspection errors.
基金supported by the National Natural Science Foundation of China(11172167)the Major State Basic Research Development Program of China(2011CB706803)
文摘The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time-delay controller is developed based on discrete optimal control method for the turning vibrations control. Numerical simulations are carried out to verify the efficiency of the controller. Results indicate the designed controller can suppress the cutting vibration efficiently and improve the stability of the cutting processes. The influence of designed time-delay and sampling time on the control performance is also discussed.
基金support for this research provided by the National Natural Science Foundation of China(Grant No.52105458)Beijing Natural Science Foundation(Grant No.3222009)+1 种基金Huaneng Group Science and Technology Research Project(No:HNKJ22-H105)China Postdoctoral Science Foundation(Grant No.2022M711807)。
文摘High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing techniques.This study proposes a novel cutting-based process,namely elliptical vibration chiseling(EV-chiseling),for the high-efficiency texturing of surface microstructures with an ultrahigh aspect ratio.Unlike conventional cutting,EV-chiseling superimposes a microscale EV on a backward-moving tool.The tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material deformation.Thanks to the tool’s backward movement,the chip is left on the material surface to form a microstructure rather than falling off.Since one microstructure is generated in one vibration cycle,the process can be highly efficient using ultrafast(>1 kHz)tool vibration.A finite element analysis model is established to explore the process mechanics of EV-chiseling.Next,a mechanistic model of the microstructured surface generation is developed to describe the microstructures’aspect ratio dependency on the process parameters.Then,surface texturing tests are performed on copper to verify the efficacy of EV-chiseling.Uniformed micro ribs with a spacing of 1–10μm and an aspect ratio of 2–5 have been successfully textured on copper.Compared with the conventional EV-cutting that uses a forward-moving tool,EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 times.The experimental results also verify the accuracy of the developed surface generation model of microstructures.Finally,the effects of elliptical trajectory,depth of cut,tool shape,and tool edge radius on the surface generation of micro ribs have been discussed.
基金Funded by the National High-Tech R&D Program(863 Program)of China(No.2012AA040405)
文摘We numerically simulated and experimentally studied the interfacialcarbon diffusion between diamond tooland workpiece materials.A diffusion modelwith respect to carbon atoms of diamond toolpenetrating into chips and machined surface was established.The numericalsimulation results of the diffusion process revealthat the distribution laws of carbon atoms concentration have a close relationship with the diffusion distance,the diffusion time,and the originalcarbon concentration of the work material.In addition,diamond face cutting tests of die steels with different carbon content are conducted at different depth of cuts and feed rates to verify the previous simulation results.The micro-morphology of the chips is detected by scanning electron microscopy.Energy dispersive X-ray analysis was proposed to investigate the change in carbon content of the chips surface.The experimentalresults of this work are of benefit to a better understanding on the diffusion wear mechanism in single crystaldiamond cutting of ferrous metals.Moreover,the experimentalresults show that the diffusion wear of diamond could be reduced markedly by applying ultrasonic vibration to the cutting toolcompared with conventionalturning.
