For the simplified model of the internal cooling passage in the turbine blade of an aero-engine,the present study applies a newly developed turbulence modeling method,very-large eddy simulation(VLES),for analyzing rot...For the simplified model of the internal cooling passage in the turbine blade of an aero-engine,the present study applies a newly developed turbulence modeling method,very-large eddy simulation(VLES),for analyzing rotational effects on the characteristics of complex turbulent flow.For comparison,not only are the delayed detached eddy simulation(DDES)method(recognized as one of the most popular hybrid Reynolds-averaged Navier-Stokes–large eddy simulation(RANS-LES)methods)and the LES method used with the same numerical setup,but also three RANS turbulence models,including the k-ωshear stress transport(SST),standard k-ε,and Reynolds stress models,are applied to analyze the flow structure in the ribbed channel(whether rotating or stationary).Complex turbulent flows in a square ribbed channel at high Reynolds number of 100000 in the stationary state and different rotational numbers(Ro)between 0.1 and 0.4 are simulated and analyzed in detail.The comparisons show that when compared with the experimental data the VLES method works best in both the stationary and rotating states.It can capture unsteady flow characteristics such as wall shear layer separation and the vortex structure resulting from the rib disturbance.The DDES method can only capture the larger-scale vortex structures,and its predictions of the time-averaged velocity differ considerably from experiments,especially in the stationary state.With a relatively coarse grid,satisfactory prediction cannot be achieved in either rotating or stationary state by the LES method with wall-adapting local eddy-viscosity(WALE)and dynamic Smagorinsky models.The three RANS models perform poorly in both the stationary and rotating states.The results demonstrate the advantages of the VLES method in analyzing the unsteady flow characteristics in the ribbed channel at high Reynolds numbers for both stationary and rotating conditions.On that basis,the study uses the VLES method to analyze the flow evolution under different rotational numbers,and the rotational effects on the fluid mechanisms are analyzed.展开更多
We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the...We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the seed source,which is gain-switched to generate nanosecond pulses with tunable pulse widths of 1-200 ns and tunable repetition rates of10 Hz-100 kHz.By utilizing a very-large-mode-area Yb-doped fiber with a core diameter of 50 μm in the power amplifier,thresholds of the stimulated Brillouin scattering at different pulse widths and repetition rates are increased.The maximum average power reaches 30.8 W at the pulse width of 4 ns and a repetition rate of 100 kHz,corresponding to an optical-tooptical conversion efficiency of ~55.2%.Pulse energy and peak power are calculated to be 0.2 mJ and 50 kW,respectively,which are limited by stimulated Brillouin scattering.The 3-dB spectral linewidth remains around 0.05 nm during the power scaling process.The stimulated Brillouin scattering limited output powers at different pulse widths and repetition rates are investigated.Peak power of 47.5 kW(0.19 mJ) is obtained for the 4 ns pulses at a repetition rate of 50 kHz,which is nearly the same as that of 4 ns pulses at 100 kHz.When the pulse width of the seed source is increased to 8 ns,peak powers/pulse energies are decreased to 19.6 kW/0.11 mJ and 13.3 kW/0.08 mJ at repetition rates of 50 kHz and 100 kHz,respectively.展开更多
基金the National Natural Science Foundation of China(No.91841302)the Jiangsu Provincial Natural Science Foundation of China(No.BK20200069)+1 种基金the Shanghai Academy of Spaceflight Technology(SAST)Innovation Fundthe Fundamental Research Funds for the Central Universities,China。
文摘For the simplified model of the internal cooling passage in the turbine blade of an aero-engine,the present study applies a newly developed turbulence modeling method,very-large eddy simulation(VLES),for analyzing rotational effects on the characteristics of complex turbulent flow.For comparison,not only are the delayed detached eddy simulation(DDES)method(recognized as one of the most popular hybrid Reynolds-averaged Navier-Stokes–large eddy simulation(RANS-LES)methods)and the LES method used with the same numerical setup,but also three RANS turbulence models,including the k-ωshear stress transport(SST),standard k-ε,and Reynolds stress models,are applied to analyze the flow structure in the ribbed channel(whether rotating or stationary).Complex turbulent flows in a square ribbed channel at high Reynolds number of 100000 in the stationary state and different rotational numbers(Ro)between 0.1 and 0.4 are simulated and analyzed in detail.The comparisons show that when compared with the experimental data the VLES method works best in both the stationary and rotating states.It can capture unsteady flow characteristics such as wall shear layer separation and the vortex structure resulting from the rib disturbance.The DDES method can only capture the larger-scale vortex structures,and its predictions of the time-averaged velocity differ considerably from experiments,especially in the stationary state.With a relatively coarse grid,satisfactory prediction cannot be achieved in either rotating or stationary state by the LES method with wall-adapting local eddy-viscosity(WALE)and dynamic Smagorinsky models.The three RANS models perform poorly in both the stationary and rotating states.The results demonstrate the advantages of the VLES method in analyzing the unsteady flow characteristics in the ribbed channel at high Reynolds numbers for both stationary and rotating conditions.On that basis,the study uses the VLES method to analyze the flow evolution under different rotational numbers,and the rotational effects on the fluid mechanisms are analyzed.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61675009)the Beijing Natural Science Foundation Program, China,Scientific Research Key Program of Beijing Municipal Education Commission, China (Grant No. KZ201910005006)
文摘We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the seed source,which is gain-switched to generate nanosecond pulses with tunable pulse widths of 1-200 ns and tunable repetition rates of10 Hz-100 kHz.By utilizing a very-large-mode-area Yb-doped fiber with a core diameter of 50 μm in the power amplifier,thresholds of the stimulated Brillouin scattering at different pulse widths and repetition rates are increased.The maximum average power reaches 30.8 W at the pulse width of 4 ns and a repetition rate of 100 kHz,corresponding to an optical-tooptical conversion efficiency of ~55.2%.Pulse energy and peak power are calculated to be 0.2 mJ and 50 kW,respectively,which are limited by stimulated Brillouin scattering.The 3-dB spectral linewidth remains around 0.05 nm during the power scaling process.The stimulated Brillouin scattering limited output powers at different pulse widths and repetition rates are investigated.Peak power of 47.5 kW(0.19 mJ) is obtained for the 4 ns pulses at a repetition rate of 50 kHz,which is nearly the same as that of 4 ns pulses at 100 kHz.When the pulse width of the seed source is increased to 8 ns,peak powers/pulse energies are decreased to 19.6 kW/0.11 mJ and 13.3 kW/0.08 mJ at repetition rates of 50 kHz and 100 kHz,respectively.
