AIM: To evaluate the efficacy and safety of active removal of silicone oil with low and high viscosity through a 23-gauge transconjunctival cannula using an external vacuum pump.METHODS: This study was conducted as a ...AIM: To evaluate the efficacy and safety of active removal of silicone oil with low and high viscosity through a 23-gauge transconjunctival cannula using an external vacuum pump.METHODS: This study was conducted as a prospective, interventional case series. A total of 22 eyes of 21 patients [1000 centistokes(c St): 17 eyes, 5700 c St:5 eyes] were included in this study. All patients underwent active silicone oil removal via the entire lumen of a 23-gauge microcannula with suction pressure of a650-700 mm Hg vacuum using an external vacuum pump. A tubing adaptor from the Total Plus Pak誖(Alcon,Fort Worth, USA) was used to join the microcannula and silicone vacuum tube connected to an external vacuum pump. Main outcome measures were mean removal time,changes of intraocular pressure(IOP) and visual acuity,and intraoperative and postoperative complications.RESULTS: Mean removal time(min) was 1.49±0.43 for1000 c St and 7. 12 ± 1. 27 for 5700 c St. The IOP was18.57±7.48 mm Hg at baseline, 11.68 ±4.55 mm Hg at day1 postoperatively(P <0.001), and 15.95±4.92, 16.82±3.81,17.41 ±3.50, and 17.09 ±3.01 mm Hg after one week, one month, three months, and six months, respectively. All patients showed improved or stabilized visual acuity.There was no occurrence of intraoperative or postoperative complications during the follow up period.CONCLUSION: This technique for active removal of silicone oil through a 23-gauge cannula using an external vacuum pump is fast, effective, and safe as well as economical for silicone oil with both low and high viscosity in all eyes with pseudophakia, aphakia, or phakia.展开更多
A novel pressure and vacuum continuous control system,which adopts a hybrid pump as pressure and vacuum source,is presented.The mathematical model of the system is developed.The theoretical simulation and analysis on ...A novel pressure and vacuum continuous control system,which adopts a hybrid pump as pressure and vacuum source,is presented.The mathematical model of the system is developed.The theoretical simulation and analysis on the system are implemented in order to study the relationships among the characteristics,parameters and working points of the system.The experimental investigations on the system characteristics are presented with the adoption ofa fuzzy-PID controller.The simulation and experimental results indicate that the pressure and vacuum continuous control system based on hybrid pump has good dynamic and static performance,strong robustness and satisfactory adaptability to various system parameters.According to the results,system can successfully gain high accuracy and fast response signal.Also,the mathematical model of system is also testified by the experimental results.展开更多
In the printing industry,vacuum pumps play a critical role in sheet feeding and gripping processes.In order to improve the efficiency of vacuum pumps,By analyzing the internal flow field of the vane type vacuum pump,t...In the printing industry,vacuum pumps play a critical role in sheet feeding and gripping processes.In order to improve the efficiency of vacuum pumps,By analyzing the internal flow field of the vane type vacuum pump,the CFD method was used to simulate the internal flow field of the air pump,and it was found that a main vortex was formed near the rotor of the trailing blade.Based on this observation,a new rotor shape design was proposed in this study,which design places arc-shaped depressed on the circumference of the rotor where the main vortex forms.The existence of the depression facilitated forward motion of the main airflow and thus effectively restricting reverse flow.Simulation results demonstrated that the proposed design is able to decrease pressure-induced torque load on the pump,and the reduction increases for an increasing operating speed.For all three operating speeds tested,the reduction in pressure-induced torque ranges from 5%to up to 10%comparing to the original pump.展开更多
文摘AIM: To evaluate the efficacy and safety of active removal of silicone oil with low and high viscosity through a 23-gauge transconjunctival cannula using an external vacuum pump.METHODS: This study was conducted as a prospective, interventional case series. A total of 22 eyes of 21 patients [1000 centistokes(c St): 17 eyes, 5700 c St:5 eyes] were included in this study. All patients underwent active silicone oil removal via the entire lumen of a 23-gauge microcannula with suction pressure of a650-700 mm Hg vacuum using an external vacuum pump. A tubing adaptor from the Total Plus Pak誖(Alcon,Fort Worth, USA) was used to join the microcannula and silicone vacuum tube connected to an external vacuum pump. Main outcome measures were mean removal time,changes of intraocular pressure(IOP) and visual acuity,and intraoperative and postoperative complications.RESULTS: Mean removal time(min) was 1.49±0.43 for1000 c St and 7. 12 ± 1. 27 for 5700 c St. The IOP was18.57±7.48 mm Hg at baseline, 11.68 ±4.55 mm Hg at day1 postoperatively(P <0.001), and 15.95±4.92, 16.82±3.81,17.41 ±3.50, and 17.09 ±3.01 mm Hg after one week, one month, three months, and six months, respectively. All patients showed improved or stabilized visual acuity.There was no occurrence of intraoperative or postoperative complications during the follow up period.CONCLUSION: This technique for active removal of silicone oil through a 23-gauge cannula using an external vacuum pump is fast, effective, and safe as well as economical for silicone oil with both low and high viscosity in all eyes with pseudophakia, aphakia, or phakia.
基金This project is supported by National Natural Science Foundation of China(No.50675075).
文摘A novel pressure and vacuum continuous control system,which adopts a hybrid pump as pressure and vacuum source,is presented.The mathematical model of the system is developed.The theoretical simulation and analysis on the system are implemented in order to study the relationships among the characteristics,parameters and working points of the system.The experimental investigations on the system characteristics are presented with the adoption ofa fuzzy-PID controller.The simulation and experimental results indicate that the pressure and vacuum continuous control system based on hybrid pump has good dynamic and static performance,strong robustness and satisfactory adaptability to various system parameters.According to the results,system can successfully gain high accuracy and fast response signal.Also,the mathematical model of system is also testified by the experimental results.
文摘In the printing industry,vacuum pumps play a critical role in sheet feeding and gripping processes.In order to improve the efficiency of vacuum pumps,By analyzing the internal flow field of the vane type vacuum pump,the CFD method was used to simulate the internal flow field of the air pump,and it was found that a main vortex was formed near the rotor of the trailing blade.Based on this observation,a new rotor shape design was proposed in this study,which design places arc-shaped depressed on the circumference of the rotor where the main vortex forms.The existence of the depression facilitated forward motion of the main airflow and thus effectively restricting reverse flow.Simulation results demonstrated that the proposed design is able to decrease pressure-induced torque load on the pump,and the reduction increases for an increasing operating speed.For all three operating speeds tested,the reduction in pressure-induced torque ranges from 5%to up to 10%comparing to the original pump.
