In this paper,we establish some strong laws of large numbers,which are for nonindependent random variables under the framework of sublinear expectations.One of our main results is for blockwise m-dependent random vari...In this paper,we establish some strong laws of large numbers,which are for nonindependent random variables under the framework of sublinear expectations.One of our main results is for blockwise m-dependent random variables,and another is for sub-orthogonal random variables.Both extend the strong law of large numbers for independent random variables under sublinear expectations to the non-independent case.展开更多
In this paper,we consider the fourth-order parabolic equation with p(x)Laplacian and variable exponent source ut+∆^(2)u−div(|■u|^(p(x)−2■u))=|u|^(q(x))−1u.By applying potential well method,we obtain global existence...In this paper,we consider the fourth-order parabolic equation with p(x)Laplacian and variable exponent source ut+∆^(2)u−div(|■u|^(p(x)−2■u))=|u|^(q(x))−1u.By applying potential well method,we obtain global existence,asymptotic behavior and blow-up of solutions with initial energy J(u_(0))≤d.Moreover,we estimate the upper bound of the blow-up time for J(u_(0))≤0.展开更多
As we enter the year 2026,the international system continues to receive shocks from Donald Trump,arguably the 21st century’s most disruptive US leader.His return to the White House in 2025 coincided with the 80th ann...As we enter the year 2026,the international system continues to receive shocks from Donald Trump,arguably the 21st century’s most disruptive US leader.His return to the White House in 2025 coincided with the 80th anniversary of the defeat of fascism and the establishment of the United Nations,the multilateral platform that carried the world’s hope for peace,restraint and collective security.The coincidence was unsettling.A world order designed to limit power now confronts a moment in which power is exercised openly,transactionally and unapologetically.展开更多
Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction...Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.展开更多
Marine forecasting is critical for navigation safety and disaster prevention.However,traditional ocean numerical forecasting models are often limited by substantial errors and inadequate capture of temporal-spatial fe...Marine forecasting is critical for navigation safety and disaster prevention.However,traditional ocean numerical forecasting models are often limited by substantial errors and inadequate capture of temporal-spatial features.To address the limitations,the paper proposes a TimeXer-based numerical forecast correction model optimized by an exogenous-variable attention mechanism.The model treats target forecast values as internal variables,and incorporates historical temporal-spatial data and seven-day numerical forecast results from traditional models as external variables based on the embedding strategy of TimeXer.Using a self-attention structure,the model captures correlations between exogenous variables and target sequences,explores intrinsic multi-dimensional relationships,and subsequently corrects endogenous variables with the mined exogenous features.The model’s performance is evaluated using metrics including MSE(Mean Squared Error),MAE(Mean Absolute Error),RMSE(Root Mean Square Error),MAPE(Mean Absolute Percentage Error),MSPE(Mean Square Percentage Error),and computational time,with TimeXer and PatchTST models serving as benchmarks.Experiment results show that the proposed model achieves lower errors and higher correction accuracy for both one-day and seven-day forecasts.展开更多
Sustained and spatially explicit monitoring of the United Nations 2030 Agenda for Sustainable Development is critical for effectively tracking progress toward the global Sustainable Development Goals(SDGs).Although la...Sustained and spatially explicit monitoring of the United Nations 2030 Agenda for Sustainable Development is critical for effectively tracking progress toward the global Sustainable Development Goals(SDGs).Although land cover information has long been recognized as an essential component for monitoring SDGs,a standardized scientific framework for identifying and prioritizing land cover related essential variables does not exist.Therefore,we propose a novel expert-and data-driven framework for identifying,refining,and selecting a priority list of Essential Land cover-related Variables for SDGs(ELcV4SDGs).This framework integrates methods including expert knowledge-based analysis,clustering of variables with similar attributes,and quantified index calculation to establish the priority list.Applying the framework to 15 specific SDG indicators,we found that the ELcV4SDGs priority list comprises three main categories,type and structure,pattern and intensity,and process and evolution of land cover,which are further divided into 19 subcategories and ultimately encompass 50 general variables.The ELcV4SDGs will support detailed spatial monitoring and enhance their scientific applications for SDG monitoring and assessment,thereby guiding future SDG priority actions and informing decision-making to advance the 2030 SDGs agenda at local,national,and global levels.展开更多
Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers of...Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers offer advantages such as reduced material usage,lower refrigerant charge,and compact structure.However,they also face challenges,including increased refrigerant pressure drop and smaller heat transfer area inside the tubes.This paper combines the advantages and disadvantages of both small and large-diameter tubes and proposes a combined-diameter heat exchanger,consisting of large and small diameters,for use in the indoor units of split-type air conditioners.There are relatively few studies in this area.In this paper,A theoretical and numerical computation method is employed to establish a theoretical-numerical calculation model,and its reliability is verified through experiments.Using this model,the optimal combined diameters and flow path design for a combined-diameter heat exchanger using R32 as the working fluid are derived.The results show that the heat transfer performance of all combined diameter configurations improves by 2.79%to 8.26%compared to the baseline design,with the coefficient of performance(COP)increasing from 4.15 to 4.27~4.5.These designs can save copper material,but at the cost of an increase in pressure drop by 66.86%to 131.84%.The scheme IIIH,using R32,is the optimal combined-diameter and flow path configuration that balances both heat transfer performance and economic cost.展开更多
Declaration of Competing Interest statements is updated in the published version of the following articles that appeared in issues of Resources Chemicals and Materials.The appropriate updated Declaration of Competing ...Declaration of Competing Interest statements is updated in the published version of the following articles that appeared in issues of Resources Chemicals and Materials.The appropriate updated Declaration of Competing Interest state-ments,provided by the Authors,are included below.展开更多
The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Compe...The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Competing Interest statements,provided by authors,are included below.展开更多
The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Compe...The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Competing Interest statements,provided by authors,are included below.展开更多
The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Compe...The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Competing Interest statements,provided by authors,are included below.展开更多
The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration of Co...The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration of Competing Interest statements,provided by authors,are included below.展开更多
The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration of Co...The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration of Competing Interest statements,provided by authors,are included below.展开更多
Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Journal of Dermatologic Science and Cosmetic Technology.The appropr...Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Journal of Dermatologic Science and Cosmetic Technology.The appropriate Declaration/Competing Interest statements,provided by the Authors,are included below.展开更多
With the application of 2.5D Woven Variable Thickness Composites(2.5DWVTC)in aviation and other fields,the issue of strength failure in this composite type has become a focal point.First,a three-step modeling approach...With the application of 2.5D Woven Variable Thickness Composites(2.5DWVTC)in aviation and other fields,the issue of strength failure in this composite type has become a focal point.First,a three-step modeling approach is proposed to rapidly construct full-scale meso-finite element models for Outer Reduction Yarn Woven Composites(ORYWC)and Inner Reduction Yarn Woven Composites(IRYWC).Then,six independent damage variables are identified:yarn fiber tension/compression,yarn matrix tension/compression,and resin matrix tension/compression.These variables are utilized to establish the constitutive equation of woven composites,considering the coupling effects of microscopic damage.Finally,combined with the Hashin failure criterion and von Mises failure criterion,the strength prediction model is implemented in ANSYS using APDL language to simulate the strength failure process of 2.5DWVTC.The results show that the predicted stiffness and strength values of various parts of ORYWC and IRYWC are in good agreement with the relevant test results.展开更多
High-performance, large-area optical gratings for applications like chirped pulse amplification, gravitational wave astronomy, and X-ray optics require sub-nanometer line placement control over several cm^(2). Electro...High-performance, large-area optical gratings for applications like chirped pulse amplification, gravitational wave astronomy, and X-ray optics require sub-nanometer line placement control over several cm^(2). Electron beam lithography with a variable shaped beam(VSB) is well suited but limited by tool-dependent address grid discretization. We adapted address grid interpolation to the VSB method, reducing the effective placement grid to 25 pm, as confirmed by stray light measurements.展开更多
The coupled nonlocal nonlinear Schrödinger equations with variable coefficients are researched using the nonstandard Hirota bilinear method.The two-soliton and double-hump one-soliton solutions for the equations ...The coupled nonlocal nonlinear Schrödinger equations with variable coefficients are researched using the nonstandard Hirota bilinear method.The two-soliton and double-hump one-soliton solutions for the equations are first obtained.By assigning different functions to the variable coefficients,we obtain V-shaped,Y-shaped,wave-type,exponential solitons,and so on.Next,we reveal the influence of the real and imaginary parts of the wave numbers on the double-hump structure based on the soliton solutions.Finally,by setting different wave numbers,we can change the distance and transmission direction of the solitons to analyze their dynamic behavior during collisions.This study establishes a theoretical framework for controlling the dynamics of optical fiber in nonlocal nonlinear systems.展开更多
An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 alloy.The effects of t...An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 alloy.The effects of the internal variables were considered in this ISV model,and the parameters were optimized by genetic algorithm.After validation,the ISV model was used to simulate the evolution of grain size(GS)and dynamic recrystallization(DRX)fraction during hot spinning via Abaqus and its subroutine Vumat.By comparing the simulated results with the experimental results,the application of the ISV model was proven to be reliable.Meanwhile,the strength of the thin-walled spun ZK61 tube increased from 303 to 334 MPa due to grain refinement by DRX and texture strengthening.Besides,some ultrafine grains(0.5μm)that played an important role in mechanical properties were formed due to the proliferation,movement,and entanglement of dislocations during the spinning process.展开更多
In order to solve the problem of the variable coefficient ordinary differen-tial equation on the bounded domain,the Lagrange interpolation method is used to approximate the exact solution of the equation,and the error...In order to solve the problem of the variable coefficient ordinary differen-tial equation on the bounded domain,the Lagrange interpolation method is used to approximate the exact solution of the equation,and the error between the numerical solution and the exact solution is obtained,and then compared with the error formed by the difference method,it is concluded that the Lagrange interpolation method is more effective in solving the variable coefficient ordinary differential equation.展开更多
The optimization of the waverider is constrained by the reversely designed leading edge and the constant shock angle distribution. This paper proposes a design method called the variable Leading-Edge Cone (vLEC) metho...The optimization of the waverider is constrained by the reversely designed leading edge and the constant shock angle distribution. This paper proposes a design method called the variable Leading-Edge Cone (vLEC) method to address these limitations. In the vLEC method, the waverider is directly designed from the preassigned leading edge and the variable shock angle distribution based on the Leading-Edge Cone (LEC) concept. Since the vLEC method is an approximate method, two test waveriders are designed and evaluated using numerical simulations to validate the shock design accuracy and the effectiveness of the vLEC method. The results show that the shocks of the test waveriders coincide well with the preassigned positions. Furthermore, four specifically designed application cases are conducted to analyze the performance benefits of the vLEC waveriders. The results of these cases indicate that, due to their variable shock angle distributions, the vLEC waveriders exhibit higher lift-to-drag ratios and better longitudinal static stability than conventional waveriders. Additionally, the vLEC waveriders demonstrate superior volumetric capacities near the symmetry plane, albeit with a minor decrease in volumetric efficiency.展开更多
文摘In this paper,we establish some strong laws of large numbers,which are for nonindependent random variables under the framework of sublinear expectations.One of our main results is for blockwise m-dependent random variables,and another is for sub-orthogonal random variables.Both extend the strong law of large numbers for independent random variables under sublinear expectations to the non-independent case.
基金Supported by NSFC(No.12101482)the Natural Science Foundation of Shaanxi Province,China(No.2018JQ1052)。
文摘In this paper,we consider the fourth-order parabolic equation with p(x)Laplacian and variable exponent source ut+∆^(2)u−div(|■u|^(p(x)−2■u))=|u|^(q(x))−1u.By applying potential well method,we obtain global existence,asymptotic behavior and blow-up of solutions with initial energy J(u_(0))≤d.Moreover,we estimate the upper bound of the blow-up time for J(u_(0))≤0.
文摘As we enter the year 2026,the international system continues to receive shocks from Donald Trump,arguably the 21st century’s most disruptive US leader.His return to the White House in 2025 coincided with the 80th anniversary of the defeat of fascism and the establishment of the United Nations,the multilateral platform that carried the world’s hope for peace,restraint and collective security.The coincidence was unsettling.A world order designed to limit power now confronts a moment in which power is exercised openly,transactionally and unapologetically.
基金funded by the National Natural Science Foundation of China(Nos.52209130 and 52379100)Shandong Provincial Natural Science Foundation(No.ZR2024ME112).
文摘Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.
基金supported by the National Key Research and Development Program Project(2023YFC3107804)Planning Fund Project of Humanities and Social Sciences Research of the Ministry of Education(24YJA880097)the Graduate Education Reform Project in North China University of Technology(217051360025XN095-17)。
文摘Marine forecasting is critical for navigation safety and disaster prevention.However,traditional ocean numerical forecasting models are often limited by substantial errors and inadequate capture of temporal-spatial features.To address the limitations,the paper proposes a TimeXer-based numerical forecast correction model optimized by an exogenous-variable attention mechanism.The model treats target forecast values as internal variables,and incorporates historical temporal-spatial data and seven-day numerical forecast results from traditional models as external variables based on the embedding strategy of TimeXer.Using a self-attention structure,the model captures correlations between exogenous variables and target sequences,explores intrinsic multi-dimensional relationships,and subsequently corrects endogenous variables with the mined exogenous features.The model’s performance is evaluated using metrics including MSE(Mean Squared Error),MAE(Mean Absolute Error),RMSE(Root Mean Square Error),MAPE(Mean Absolute Percentage Error),MSPE(Mean Square Percentage Error),and computational time,with TimeXer and PatchTST models serving as benchmarks.Experiment results show that the proposed model achieves lower errors and higher correction accuracy for both one-day and seven-day forecasts.
基金supported by the Key Program of National Natural Science Foundation of China(Grant No.41930650)Young Scientists Fund of the National Natural Science Foundation of China(Grant No.42301310).
文摘Sustained and spatially explicit monitoring of the United Nations 2030 Agenda for Sustainable Development is critical for effectively tracking progress toward the global Sustainable Development Goals(SDGs).Although land cover information has long been recognized as an essential component for monitoring SDGs,a standardized scientific framework for identifying and prioritizing land cover related essential variables does not exist.Therefore,we propose a novel expert-and data-driven framework for identifying,refining,and selecting a priority list of Essential Land cover-related Variables for SDGs(ELcV4SDGs).This framework integrates methods including expert knowledge-based analysis,clustering of variables with similar attributes,and quantified index calculation to establish the priority list.Applying the framework to 15 specific SDG indicators,we found that the ELcV4SDGs priority list comprises three main categories,type and structure,pattern and intensity,and process and evolution of land cover,which are further divided into 19 subcategories and ultimately encompass 50 general variables.The ELcV4SDGs will support detailed spatial monitoring and enhance their scientific applications for SDG monitoring and assessment,thereby guiding future SDG priority actions and informing decision-making to advance the 2030 SDGs agenda at local,national,and global levels.
基金supported by Supported by the Scientific Research Foundation for High-Level Talents of Zhoukou Normal University(ZKNUC2024018).
文摘Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers offer advantages such as reduced material usage,lower refrigerant charge,and compact structure.However,they also face challenges,including increased refrigerant pressure drop and smaller heat transfer area inside the tubes.This paper combines the advantages and disadvantages of both small and large-diameter tubes and proposes a combined-diameter heat exchanger,consisting of large and small diameters,for use in the indoor units of split-type air conditioners.There are relatively few studies in this area.In this paper,A theoretical and numerical computation method is employed to establish a theoretical-numerical calculation model,and its reliability is verified through experiments.Using this model,the optimal combined diameters and flow path design for a combined-diameter heat exchanger using R32 as the working fluid are derived.The results show that the heat transfer performance of all combined diameter configurations improves by 2.79%to 8.26%compared to the baseline design,with the coefficient of performance(COP)increasing from 4.15 to 4.27~4.5.These designs can save copper material,but at the cost of an increase in pressure drop by 66.86%to 131.84%.The scheme IIIH,using R32,is the optimal combined-diameter and flow path configuration that balances both heat transfer performance and economic cost.
文摘Declaration of Competing Interest statements is updated in the published version of the following articles that appeared in issues of Resources Chemicals and Materials.The appropriate updated Declaration of Competing Interest state-ments,provided by the Authors,are included below.
文摘The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Competing Interest statements,provided by authors,are included below.
文摘The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Competing Interest statements,provided by authors,are included below.
文摘The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration Competing Interest statements,provided by authors,are included below.
文摘The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration of Competing Interest statements,provided by authors,are included below.
文摘The Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Water Science and Engineering.The appropriate Declaration of Competing Interest statements,provided by authors,are included below.
文摘Declaration of Competing Interest statements were not included in the published version of the following articles that appeared in previous issues of Journal of Dermatologic Science and Cosmetic Technology.The appropriate Declaration/Competing Interest statements,provided by the Authors,are included below.
基金supported by National Science and Technology Major Project,China(No.2017-IV-0007-0044)National Natural Science Foundation of China(No.52175142),National Natural Science Foundation of China(No.52305170)Natural Science Foundation of Sichuan Province,China(No.2022NSFSC1885)。
文摘With the application of 2.5D Woven Variable Thickness Composites(2.5DWVTC)in aviation and other fields,the issue of strength failure in this composite type has become a focal point.First,a three-step modeling approach is proposed to rapidly construct full-scale meso-finite element models for Outer Reduction Yarn Woven Composites(ORYWC)and Inner Reduction Yarn Woven Composites(IRYWC).Then,six independent damage variables are identified:yarn fiber tension/compression,yarn matrix tension/compression,and resin matrix tension/compression.These variables are utilized to establish the constitutive equation of woven composites,considering the coupling effects of microscopic damage.Finally,combined with the Hashin failure criterion and von Mises failure criterion,the strength prediction model is implemented in ANSYS using APDL language to simulate the strength failure process of 2.5DWVTC.The results show that the predicted stiffness and strength values of various parts of ORYWC and IRYWC are in good agreement with the relevant test results.
基金Bundesministerium für Bildung und Forschung(03Z1H534, 13N16028)Deutsche Forschungsgemeinschaft(448663633, 455425131)。
文摘High-performance, large-area optical gratings for applications like chirped pulse amplification, gravitational wave astronomy, and X-ray optics require sub-nanometer line placement control over several cm^(2). Electron beam lithography with a variable shaped beam(VSB) is well suited but limited by tool-dependent address grid discretization. We adapted address grid interpolation to the VSB method, reducing the effective placement grid to 25 pm, as confirmed by stray light measurements.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1604200)the National Natural Science Foundation of China(Grant No.12261131495)Institute of Systems Science,Beijing Wuzi University(Grant No.BWUISS21).
文摘The coupled nonlocal nonlinear Schrödinger equations with variable coefficients are researched using the nonstandard Hirota bilinear method.The two-soliton and double-hump one-soliton solutions for the equations are first obtained.By assigning different functions to the variable coefficients,we obtain V-shaped,Y-shaped,wave-type,exponential solitons,and so on.Next,we reveal the influence of the real and imaginary parts of the wave numbers on the double-hump structure based on the soliton solutions.Finally,by setting different wave numbers,we can change the distance and transmission direction of the solitons to analyze their dynamic behavior during collisions.This study establishes a theoretical framework for controlling the dynamics of optical fiber in nonlocal nonlinear systems.
基金supported by the National Natural Science Foundation of China(No.51905123)Major Scientific and Technological Innovation Program of Shandong Province,China(Nos.2020CXGC010303,2022ZLGX04)Key R&D Programme of Shandong Province,China(No.2022JMRH0308).
文摘An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 alloy.The effects of the internal variables were considered in this ISV model,and the parameters were optimized by genetic algorithm.After validation,the ISV model was used to simulate the evolution of grain size(GS)and dynamic recrystallization(DRX)fraction during hot spinning via Abaqus and its subroutine Vumat.By comparing the simulated results with the experimental results,the application of the ISV model was proven to be reliable.Meanwhile,the strength of the thin-walled spun ZK61 tube increased from 303 to 334 MPa due to grain refinement by DRX and texture strengthening.Besides,some ultrafine grains(0.5μm)that played an important role in mechanical properties were formed due to the proliferation,movement,and entanglement of dislocations during the spinning process.
文摘In order to solve the problem of the variable coefficient ordinary differen-tial equation on the bounded domain,the Lagrange interpolation method is used to approximate the exact solution of the equation,and the error between the numerical solution and the exact solution is obtained,and then compared with the error formed by the difference method,it is concluded that the Lagrange interpolation method is more effective in solving the variable coefficient ordinary differential equation.
基金supported by grants from the National Natural Science Foundation of China(No.U20B2006)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110145)Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001).
文摘The optimization of the waverider is constrained by the reversely designed leading edge and the constant shock angle distribution. This paper proposes a design method called the variable Leading-Edge Cone (vLEC) method to address these limitations. In the vLEC method, the waverider is directly designed from the preassigned leading edge and the variable shock angle distribution based on the Leading-Edge Cone (LEC) concept. Since the vLEC method is an approximate method, two test waveriders are designed and evaluated using numerical simulations to validate the shock design accuracy and the effectiveness of the vLEC method. The results show that the shocks of the test waveriders coincide well with the preassigned positions. Furthermore, four specifically designed application cases are conducted to analyze the performance benefits of the vLEC waveriders. The results of these cases indicate that, due to their variable shock angle distributions, the vLEC waveriders exhibit higher lift-to-drag ratios and better longitudinal static stability than conventional waveriders. Additionally, the vLEC waveriders demonstrate superior volumetric capacities near the symmetry plane, albeit with a minor decrease in volumetric efficiency.
