AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necess...AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation.METHODS A prospective,randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate(n=29),or another treatment modality(n=27;cast immobilisation with or without wires or external fixator).Outcomes were measured at 12 wk.Functional outcome scores measured were the Patient-Rated Wrist Evaluation(PRWE)Score;Disabilities of the Arm,Shoulder and Hand and activities of daily living(ADLs).Clinical outcomes were wrist range of motion and grip strength.Radiographic parameters were volar inclination and ulnar variance.RESULTS Patients in the volar locking plate group had significantly better PRWE scores,ADL scores,grip strength and range of extension at three months compared with the control group.All radiological parameters were significantly better in the volar locking plate group at 3 mo.CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities.Anatomical reduction was significantly more likely to be preserved in the plating group.Level of evidence:Ⅱ.展开更多
AIM To determine technical considerations and radiographic outcomes of the Synthes volar rim distal radius plate to treat complex intra-articular fractures. METHODS This review highlights technical considerations lear...AIM To determine technical considerations and radiographic outcomes of the Synthes volar rim distal radius plate to treat complex intra-articular fractures. METHODS This review highlights technical considerations learnt using this implant since it was introduced in a major trauma unit in November 2011, including anatomical reduction and whether this was maintained radiographically. RESULTS Twenty-six of the 382 internally fixed distal radial fractures at our unit(6.8%) were deemed to require this plate in order to achieve optimal fracture fixation between November 2011 and May 2014. A further dorsal and/or radial plate was necessary in 35% and variable angle screws were used in 54% of cases. Postoperatively, mean radial height, inclination, volar tilt and ulnar variance restored were 11.7 mm, 21o, 4.3o and-1.2 mm respectively. There were no cases of non-union or flexor/extensor tendon rupture; one case of loss of fracture reduction. Overall incidence of plate removal was 15% with one plate removed for flexor and one for extensor tendon irritation CONCLUSION The use of a rim plate enables control of challenging fardistal fracture patterns. However, additional plates were required to improve and maintain reduction. Variable angle screws were necessary in half the cases to avoid intra-articular screw penetration. If used judiciously, this implant can achieve stable fixation despite the complexity of the fracture pattern.展开更多
Background: There is a large assortment of modalities for the surgical treatment/management of distal radius fractures (DRFs), where the most widely used is the fixed-angle volar plating (VLP) system, which, sometimes...Background: There is a large assortment of modalities for the surgical treatment/management of distal radius fractures (DRFs), where the most widely used is the fixed-angle volar plating (VLP) system, which, sometimes, is referred to as the “surgical modality of choice”. While outcomes with each modality are usually good to excellent, each has its share of shortcomings and complications. Thus, there is scope for improvements to existing modalities and/or introduction of new ones. Study Purpose: We introduce a novel modality, namely, the prototype of an intramedullary injectable bioresorbable polymer-bioresorbable balloon osteosynthesis (IPBO) system, and investigated its plausibility. Experimental Procedures: The biomechanical performance of a construct comprising a synthetic distal radius (fourth-generation Sawbones?) on which a simulated fracture was created (4-mm wide osteotomy positioned 25 mm from the most distal end of the radius) and fixated with a placement of the IPBO system (SIPBO Construct) was compared to that when the fixation was with an approved Ti-6Al-4V alloy VLP system (SVLP Construct), under a clinically-relevant compressive loading protocol. Performance involved determination of quantitative parameters of the construct (initial longitudinal stiffness (ICLS), final longitudinal stiffness (FCLS), and load-to-failure (Pf)) and observation and recording of features of the construct at the fracture point. We also determined the quantitative parameters for the intact synthetic distal radius (control). Results: For each of the quantitative parameters, the range of values for SIPBO Construct was within that for SVLP Construct, suggesting that the IPBO System is a plausible modality. Also, for SIPBO Construct, failure occurred within the polymer zone, whereas, for SVLP Construct, some failure features were fracture of the cortical wall and of the dorsal proximal fragments. Conclusion: The findings suggest that the IPBO system is plausible. As such, it merits further study;for example, determination of the influence of fracture gap fill ratio (defined as the proportion of the fracture gap that is filled by the expanding balloon as the polymer is injected into the balloon) on a large collection of quantitative biomechanical parameters.展开更多
AIM To determine factors correlated with postoperative radial shortening in patients with distal radius fractures treated with volar locking distal radius plates.METHODS A total of 250 patients with a distal radius fr...AIM To determine factors correlated with postoperative radial shortening in patients with distal radius fractures treated with volar locking distal radius plates.METHODS A total of 250 patients with a distal radius fracture stabilised with volar locking plates between January 2010 and December 2014 were included in a multicentre retrospective cohort study.We measured the distance of the distal locking screws to the joint line immediately postoperatively and then measured radial shortening after six to eight weeks using the change in ulnar variance.RESULTS Multivariate linear regression analysis showed that there was a significant linear association between the distance of the screws from the joint line and radial shortening.No other patient,injury,or treatment-related characteristic significantly influenced radial shortening in multivariate analysis.CONCLUSION Distal locking screws should be placed as close as possible to the subchondral joint line to prevent postoperative loss of reduction.展开更多
There have been no studies reported on the difference in cortical activation during use of volar and dorsal hand splints.We attempted to investigate the difference in cortical activation in the somatosensory cortical ...There have been no studies reported on the difference in cortical activation during use of volar and dorsal hand splints.We attempted to investigate the difference in cortical activation in the somatosensory cortical area during use of volar and dorsal hand splints by functional magnetic resonance imaging（f MRI）.We recruited eight healthy volunteers.f MRI was performed while subjects who were fitted with volar or dorsal hand splints performed grasp-release movements.Regions of interest were placed on the primary motor cortex（M1）,primary somatosensory cortex（S1）,posterior parietal cortex（PPC）,and secondary somatosensory cortex（S2）.Results of group analysis of f MRI data showed that the total numbers of activated voxels in all ROIs were significantly higher during use of volar hand splint（3,376） compared with that（1,416） during use of dorsal hand splint.In each ROI,use of volar hand splint induced greater activation in all ROIs（M1：1,748,S1 ：1,455,PPC：23,and S2：150） compared with use of dorsal hand splint（M1：783,S1：625,PPC：0,and S2：8）.The peak activated value was also higher during use of volar hand splint（t-value：17.29） compared with that during use of dorsal hand splint（t-value：13.11）.Taken together,use of volar hand splint induced greater cortical activation relevant to somatosensory function than use of dorsal hand splint.This result would be important for the physiatrist and therapist to apply appropriate somatosensory input in patients with brain injury.展开更多
Objectives: Local digital nerve blockade is frequently used in many trauma cases. Two commonly used techniques of digital nerve block with local anesthetic are the two-injection dorsal technique and the single-injecti...Objectives: Local digital nerve blockade is frequently used in many trauma cases. Two commonly used techniques of digital nerve block with local anesthetic are the two-injection dorsal technique and the single-injection volar subcutaneous technique. In this study we compare various parameters of the single-injection volar subcutaneous block and the two-injection dorsal block. Pain score, amount of injected anesthetic, time of effect onset, patients’ and physicians’ satisfaction scores in each injection technique was compared. Methods: 128 participating patients were randomly divided into two equal experimental groups. Two-percentage Lidocaine was used as an anesthetic agent. Doses of 1.8 and 3-4 ml were used in the single-injection subcutaneous block and the two-injection dorsal block groups, respectively. Following injections, the patients were asked to score their discomfort experience on a standard visual analog scale of 0 (no pain) to 10 (most pain imaginable). They also were asked to score the rate of their satisfaction from 1(no satisfaction) to 5 (most satisfaction). The onset of effect was determined using the pinprick test. Results: Our results demonstrate that the two-injection dorsal block technique imposes more pain but the pain score difference was not statistically significant. Both patients and physicians were more comfortable with the single-injection subcutaneous digital block method. This satisfaction difference was statistically significant. Conclusions: The single-injection method is more efficient and the patients were more pleased. The advantages of this method are its safety, user friendly, need of lower amount of anesthetic drug and its easiness to teach and learn.展开更多
Complications and shortcomings of volar plating, which is very widely used for surgical treatment of distal radius fractures, are well known. Thus, there is scope for alternative innovative surgical methods. In the pr...Complications and shortcomings of volar plating, which is very widely used for surgical treatment of distal radius fractures, are well known. Thus, there is scope for alternative innovative surgical methods. In the present work, we used the finite element analysis method to compare the biomechanical performance of a model of a construct comprising a simulated distal radius fracture considered fixated using a notional intramedullary injectable bioresorbable polymer-bioresorbable balloon osteosynthesis system (“fixator”) versus using a commercially-available volar locking plate (VP). The biomechanical parameters determined were longitudinal stiffness and factor of safety under each of the applied loads.?For the fixator model, 1) each of the biomechanical parameters was markedly influenced by fracture gap fill ratio (FGFR) (defined as the proportion of the volume of the fracture gap that is considered occupied by the expanded polymer-filled balloon)?but not by modulus of elasticity assigned to the polymer;2) with FGFR = 100%, stiffness was comparable to that of the Ti-6Al-4V alloy VP construct model;and 3) stiffness was within the range of literature values for stiffness of constructs comprising simulated fractures in fresh cadaveric distal radii fixated using metal volar locking plate. These results suggest that the fixator may be an alternative modality to metal volar plating and, as such, deserves further evaluation.展开更多
Objective:To compare the efficacy of open reduction and volar locking plate internal fixation with closed reduction and external fixation in the treatment of distal radius fractures by using meta analysis.Methods:The ...Objective:To compare the efficacy of open reduction and volar locking plate internal fixation with closed reduction and external fixation in the treatment of distal radius fractures by using meta analysis.Methods:The databases of CNKI,Wanfang,Weipu,Chinese biomedical literature,Pubmed,Embase,and Cochrane Library were retrieved,and the randomized controlled studies that directly compared the efficacy of plate internal fixation and closed reduction external fixation in the treatment of distal radius fractures published publicly from the establishment of the database to April 2023 were collected.The two researchers independently screened the retrieved literature according to the inclusion and exclusion criteria,extracted data,used Cochrane risk bias assessment tool for quality assessment,and used RevMan 5.4 software for meta analysis.Results:A total of 10 randomized controlled trials were included,all of which were in English.There were 1042 patients in total,and 9 of them were rated as low risk.Meta analysis results showed that one year after the treatment of distal radius fracture with volar locking plate internal fixation,DASH score[MD=-5.64,95%CI(-7.21,-4.06),P<0.00001];One year later,PRWE score[MD=-5.90,95%CI(-8.88,-2.92),P=0.001];Palm flexion[MD=5.92,95%CI(1.29,10.55),P=0.01];Pronation[MD=2.48,95%CI(0.59,4.36),P=0.01];Postrotation[MD=4.73,95%CI(2.15,7.31),P=0.0003];Grip strength[MD=0.61,95%CI(0.12,1.10),P=0.02];palmar tilt angle[MD=9.84,95%CI(5.66,14.02),P<0.00001];Radial inclination[MD=4.33,95%CI(2.97,5.69),P<0.00001]was superior to closed reduction plaster or splint external fixation.One year later,the European Five dimensional Health Scale(EQ-5D-5L)score[MD=0.02,95%CI(-0.01,0.05),P=0.27];Back extension[MD=2.22,95%CI(-4.15,8.59),P=0.49];Ulnar deviation[MD=3.49,95%CI(-0.80,7.78),P=0.11];Radial deviation[MD=2.05,95%CI(-2.39,6.50),P=0.37];Ulnar variance[MD=-1.14,95%CI(-3.16,0.88),P=0.27];There was no significant difference in complications[MD=0.77,95%CI(0.54,1.10),P=0.16](P>0.05).Conclusion:Based on the current clinical data,internal fixation with volar locking plate is more conducive to mid-term DASH score and grip strength recovery than closed reduction plaster or splint external fixation,but there is no significant difference in the quality of life and complications of patients.For adult distal radius fractures,surgical indications should be carefully grasped,and non operative treatment should be given priority.展开更多
Background: AO type C3 distal radius fracture (DRF) is the most difficult-to-treat fracture type because of a tendency to shorten and collapse. The purpose of this study is to investigate the clinical and radiographic...Background: AO type C3 distal radius fracture (DRF) is the most difficult-to-treat fracture type because of a tendency to shorten and collapse. The purpose of this study is to investigate the clinical and radiographic outcomes of comminuted intra-articular DRFs treated with a dynamic external fixator combined with a volar locking plate (VLP). Methods: Eleven patients (mean age, 61 years) with comminuted intra-articular DRFs were treated with a dynamic type of external fixator combined with a VLP. Following reduction and fixation with a VLP, the dynamic external fixator was applied and the distal ball joint of the fixator was aligned with the lunate-capitate line. The ball joint was unlocked approximately 2 weeks after surgery to allow wrist mobilization. The fixator was removed 3 - 6 weeks (mean, 5 weeks) after surgery. Consequently, clinical and radiographic assessments were carried out at the final follow-up. Results: At the final follow-up, the mean range values of wrist extension and flexion were 76°and 64°, respectively. Compared with the contralateral side, the mean grip strength was 84%. The mean Modified Mayo Wrist Score and the Disabilities of the Arm, Shoulder and Hand score were 88 and 9, respectively. No significant differences in the radiographic parameters exist between after surgery and final follow-up. Conclusions: This study indicated that the dynamic wrist fixator combined with a VLP is effective for the treatment of AO type C3 DRFs.展开更多
Purpose:Comminuted intraarticular distal radial fractures are difficult to treat conservatively and require operative treatment.This study compared the functional outcomes between variable angle volar plating and exte...Purpose:Comminuted intraarticular distal radial fractures are difficult to treat conservatively and require operative treatment.This study compared the functional outcomes between variable angle volar plating and external fixator with K-wire augmentation in open reduction and internal fixation.Methods:A total of 62 adult patients with comminuted intraarticular distal radius fracture were randomized into 2 groups:volar plate group and external fixator group.These patients aged between 18 and 60 years had unilateral fractures,and agreed to be included in the study.Patients with a history of fracture,bilateral fracture,associated other injuries,delayed injury for more than 2 weeks,open fracture,pre-existing arthrosis or disability,psychiatric illness and pathological fracture were excluded.Patients were followed up at 6 weeks,3 months,6 months and 1 year.The assessment of pain,functional activity,range of motion and grip strength was done at each stage of follow-up.The pain and functional activities were assessed by patient rated wrist evaluation(PRWE)score and disabilities of the arm,shoulder and hand(DASH)score.Results:Patients in volar plate group had superior PRWE score and DASH score at each stage of followup.At 1 year follow-up,the mean PRWE score were 7.48 for volar plate group and 7.35 for external fixator group;while the mean DASH score was 4.65 for volar plate group and 5.61 for external fixator group.They had better flexion and extension range of movement.They also had better pronation and supination range of motion at initial follow-up,however the difference get attenuated by 1 year.Volar plate group had significantly better grip strength than external fixator group.Complication rates were higher in external fixation group.Conclusion:Fixation with variable angle volar plate results in early wrist mobilization,better range of movement,less pain and disability and early return of function.展开更多
This case report describes the use of a Functional Thenar Eminence myocutaneous flap for reconstruction of volar defect of distal right thumb of a 25-year-old male who sustained a twisting injury while working. Part o...This case report describes the use of a Functional Thenar Eminence myocutaneous flap for reconstruction of volar defect of distal right thumb of a 25-year-old male who sustained a twisting injury while working. Part of bone and tendon were exposed and the tip of the distal phalanx was crushed, with bony defect.展开更多
文摘AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation.METHODS A prospective,randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate(n=29),or another treatment modality(n=27;cast immobilisation with or without wires or external fixator).Outcomes were measured at 12 wk.Functional outcome scores measured were the Patient-Rated Wrist Evaluation(PRWE)Score;Disabilities of the Arm,Shoulder and Hand and activities of daily living(ADLs).Clinical outcomes were wrist range of motion and grip strength.Radiographic parameters were volar inclination and ulnar variance.RESULTS Patients in the volar locking plate group had significantly better PRWE scores,ADL scores,grip strength and range of extension at three months compared with the control group.All radiological parameters were significantly better in the volar locking plate group at 3 mo.CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities.Anatomical reduction was significantly more likely to be preserved in the plating group.Level of evidence:Ⅱ.
文摘AIM To determine technical considerations and radiographic outcomes of the Synthes volar rim distal radius plate to treat complex intra-articular fractures. METHODS This review highlights technical considerations learnt using this implant since it was introduced in a major trauma unit in November 2011, including anatomical reduction and whether this was maintained radiographically. RESULTS Twenty-six of the 382 internally fixed distal radial fractures at our unit(6.8%) were deemed to require this plate in order to achieve optimal fracture fixation between November 2011 and May 2014. A further dorsal and/or radial plate was necessary in 35% and variable angle screws were used in 54% of cases. Postoperatively, mean radial height, inclination, volar tilt and ulnar variance restored were 11.7 mm, 21o, 4.3o and-1.2 mm respectively. There were no cases of non-union or flexor/extensor tendon rupture; one case of loss of fracture reduction. Overall incidence of plate removal was 15% with one plate removed for flexor and one for extensor tendon irritation CONCLUSION The use of a rim plate enables control of challenging fardistal fracture patterns. However, additional plates were required to improve and maintain reduction. Variable angle screws were necessary in half the cases to avoid intra-articular screw penetration. If used judiciously, this implant can achieve stable fixation despite the complexity of the fracture pattern.
文摘Background: There is a large assortment of modalities for the surgical treatment/management of distal radius fractures (DRFs), where the most widely used is the fixed-angle volar plating (VLP) system, which, sometimes, is referred to as the “surgical modality of choice”. While outcomes with each modality are usually good to excellent, each has its share of shortcomings and complications. Thus, there is scope for improvements to existing modalities and/or introduction of new ones. Study Purpose: We introduce a novel modality, namely, the prototype of an intramedullary injectable bioresorbable polymer-bioresorbable balloon osteosynthesis (IPBO) system, and investigated its plausibility. Experimental Procedures: The biomechanical performance of a construct comprising a synthetic distal radius (fourth-generation Sawbones?) on which a simulated fracture was created (4-mm wide osteotomy positioned 25 mm from the most distal end of the radius) and fixated with a placement of the IPBO system (SIPBO Construct) was compared to that when the fixation was with an approved Ti-6Al-4V alloy VLP system (SVLP Construct), under a clinically-relevant compressive loading protocol. Performance involved determination of quantitative parameters of the construct (initial longitudinal stiffness (ICLS), final longitudinal stiffness (FCLS), and load-to-failure (Pf)) and observation and recording of features of the construct at the fracture point. We also determined the quantitative parameters for the intact synthetic distal radius (control). Results: For each of the quantitative parameters, the range of values for SIPBO Construct was within that for SVLP Construct, suggesting that the IPBO System is a plausible modality. Also, for SIPBO Construct, failure occurred within the polymer zone, whereas, for SVLP Construct, some failure features were fracture of the cortical wall and of the dorsal proximal fragments. Conclusion: The findings suggest that the IPBO system is plausible. As such, it merits further study;for example, determination of the influence of fracture gap fill ratio (defined as the proportion of the fracture gap that is filled by the expanding balloon as the polymer is injected into the balloon) on a large collection of quantitative biomechanical parameters.
文摘AIM To determine factors correlated with postoperative radial shortening in patients with distal radius fractures treated with volar locking distal radius plates.METHODS A total of 250 patients with a distal radius fracture stabilised with volar locking plates between January 2010 and December 2014 were included in a multicentre retrospective cohort study.We measured the distance of the distal locking screws to the joint line immediately postoperatively and then measured radial shortening after six to eight weeks using the change in ulnar variance.RESULTS Multivariate linear regression analysis showed that there was a significant linear association between the distance of the screws from the joint line and radial shortening.No other patient,injury,or treatment-related characteristic significantly influenced radial shortening in multivariate analysis.CONCLUSION Distal locking screws should be placed as close as possible to the subchondral joint line to prevent postoperative loss of reduction.
基金supported by the National Research Foundation(NRF) of Korea Grant funded by the Korean Government(MSIP),No.2015R1A2A2A01004073
文摘There have been no studies reported on the difference in cortical activation during use of volar and dorsal hand splints.We attempted to investigate the difference in cortical activation in the somatosensory cortical area during use of volar and dorsal hand splints by functional magnetic resonance imaging（f MRI）.We recruited eight healthy volunteers.f MRI was performed while subjects who were fitted with volar or dorsal hand splints performed grasp-release movements.Regions of interest were placed on the primary motor cortex（M1）,primary somatosensory cortex（S1）,posterior parietal cortex（PPC）,and secondary somatosensory cortex（S2）.Results of group analysis of f MRI data showed that the total numbers of activated voxels in all ROIs were significantly higher during use of volar hand splint（3,376） compared with that（1,416） during use of dorsal hand splint.In each ROI,use of volar hand splint induced greater activation in all ROIs（M1：1,748,S1 ：1,455,PPC：23,and S2：150） compared with use of dorsal hand splint（M1：783,S1：625,PPC：0,and S2：8）.The peak activated value was also higher during use of volar hand splint（t-value：17.29） compared with that during use of dorsal hand splint（t-value：13.11）.Taken together,use of volar hand splint induced greater cortical activation relevant to somatosensory function than use of dorsal hand splint.This result would be important for the physiatrist and therapist to apply appropriate somatosensory input in patients with brain injury.
文摘Objectives: Local digital nerve blockade is frequently used in many trauma cases. Two commonly used techniques of digital nerve block with local anesthetic are the two-injection dorsal technique and the single-injection volar subcutaneous technique. In this study we compare various parameters of the single-injection volar subcutaneous block and the two-injection dorsal block. Pain score, amount of injected anesthetic, time of effect onset, patients’ and physicians’ satisfaction scores in each injection technique was compared. Methods: 128 participating patients were randomly divided into two equal experimental groups. Two-percentage Lidocaine was used as an anesthetic agent. Doses of 1.8 and 3-4 ml were used in the single-injection subcutaneous block and the two-injection dorsal block groups, respectively. Following injections, the patients were asked to score their discomfort experience on a standard visual analog scale of 0 (no pain) to 10 (most pain imaginable). They also were asked to score the rate of their satisfaction from 1(no satisfaction) to 5 (most satisfaction). The onset of effect was determined using the pinprick test. Results: Our results demonstrate that the two-injection dorsal block technique imposes more pain but the pain score difference was not statistically significant. Both patients and physicians were more comfortable with the single-injection subcutaneous digital block method. This satisfaction difference was statistically significant. Conclusions: The single-injection method is more efficient and the patients were more pleased. The advantages of this method are its safety, user friendly, need of lower amount of anesthetic drug and its easiness to teach and learn.
文摘Complications and shortcomings of volar plating, which is very widely used for surgical treatment of distal radius fractures, are well known. Thus, there is scope for alternative innovative surgical methods. In the present work, we used the finite element analysis method to compare the biomechanical performance of a model of a construct comprising a simulated distal radius fracture considered fixated using a notional intramedullary injectable bioresorbable polymer-bioresorbable balloon osteosynthesis system (“fixator”) versus using a commercially-available volar locking plate (VP). The biomechanical parameters determined were longitudinal stiffness and factor of safety under each of the applied loads.?For the fixator model, 1) each of the biomechanical parameters was markedly influenced by fracture gap fill ratio (FGFR) (defined as the proportion of the volume of the fracture gap that is considered occupied by the expanded polymer-filled balloon)?but not by modulus of elasticity assigned to the polymer;2) with FGFR = 100%, stiffness was comparable to that of the Ti-6Al-4V alloy VP construct model;and 3) stiffness was within the range of literature values for stiffness of constructs comprising simulated fractures in fresh cadaveric distal radii fixated using metal volar locking plate. These results suggest that the fixator may be an alternative modality to metal volar plating and, as such, deserves further evaluation.
基金2022 Key Specialty Construction Project of Traditional Chinese Medicine:Traditional Chinese Orthopedics and Traumatology Department (No.962042)2020 Regional Traditional Chinese Medicine (Orthopedics and Traumatology)Diagnosis and Treatment Center (Jin Wei Zhong[2020]No.5)。
文摘Objective:To compare the efficacy of open reduction and volar locking plate internal fixation with closed reduction and external fixation in the treatment of distal radius fractures by using meta analysis.Methods:The databases of CNKI,Wanfang,Weipu,Chinese biomedical literature,Pubmed,Embase,and Cochrane Library were retrieved,and the randomized controlled studies that directly compared the efficacy of plate internal fixation and closed reduction external fixation in the treatment of distal radius fractures published publicly from the establishment of the database to April 2023 were collected.The two researchers independently screened the retrieved literature according to the inclusion and exclusion criteria,extracted data,used Cochrane risk bias assessment tool for quality assessment,and used RevMan 5.4 software for meta analysis.Results:A total of 10 randomized controlled trials were included,all of which were in English.There were 1042 patients in total,and 9 of them were rated as low risk.Meta analysis results showed that one year after the treatment of distal radius fracture with volar locking plate internal fixation,DASH score[MD=-5.64,95%CI(-7.21,-4.06),P<0.00001];One year later,PRWE score[MD=-5.90,95%CI(-8.88,-2.92),P=0.001];Palm flexion[MD=5.92,95%CI(1.29,10.55),P=0.01];Pronation[MD=2.48,95%CI(0.59,4.36),P=0.01];Postrotation[MD=4.73,95%CI(2.15,7.31),P=0.0003];Grip strength[MD=0.61,95%CI(0.12,1.10),P=0.02];palmar tilt angle[MD=9.84,95%CI(5.66,14.02),P<0.00001];Radial inclination[MD=4.33,95%CI(2.97,5.69),P<0.00001]was superior to closed reduction plaster or splint external fixation.One year later,the European Five dimensional Health Scale(EQ-5D-5L)score[MD=0.02,95%CI(-0.01,0.05),P=0.27];Back extension[MD=2.22,95%CI(-4.15,8.59),P=0.49];Ulnar deviation[MD=3.49,95%CI(-0.80,7.78),P=0.11];Radial deviation[MD=2.05,95%CI(-2.39,6.50),P=0.37];Ulnar variance[MD=-1.14,95%CI(-3.16,0.88),P=0.27];There was no significant difference in complications[MD=0.77,95%CI(0.54,1.10),P=0.16](P>0.05).Conclusion:Based on the current clinical data,internal fixation with volar locking plate is more conducive to mid-term DASH score and grip strength recovery than closed reduction plaster or splint external fixation,but there is no significant difference in the quality of life and complications of patients.For adult distal radius fractures,surgical indications should be carefully grasped,and non operative treatment should be given priority.
文摘Background: AO type C3 distal radius fracture (DRF) is the most difficult-to-treat fracture type because of a tendency to shorten and collapse. The purpose of this study is to investigate the clinical and radiographic outcomes of comminuted intra-articular DRFs treated with a dynamic external fixator combined with a volar locking plate (VLP). Methods: Eleven patients (mean age, 61 years) with comminuted intra-articular DRFs were treated with a dynamic type of external fixator combined with a VLP. Following reduction and fixation with a VLP, the dynamic external fixator was applied and the distal ball joint of the fixator was aligned with the lunate-capitate line. The ball joint was unlocked approximately 2 weeks after surgery to allow wrist mobilization. The fixator was removed 3 - 6 weeks (mean, 5 weeks) after surgery. Consequently, clinical and radiographic assessments were carried out at the final follow-up. Results: At the final follow-up, the mean range values of wrist extension and flexion were 76°and 64°, respectively. Compared with the contralateral side, the mean grip strength was 84%. The mean Modified Mayo Wrist Score and the Disabilities of the Arm, Shoulder and Hand score were 88 and 9, respectively. No significant differences in the radiographic parameters exist between after surgery and final follow-up. Conclusions: This study indicated that the dynamic wrist fixator combined with a VLP is effective for the treatment of AO type C3 DRFs.
文摘Purpose:Comminuted intraarticular distal radial fractures are difficult to treat conservatively and require operative treatment.This study compared the functional outcomes between variable angle volar plating and external fixator with K-wire augmentation in open reduction and internal fixation.Methods:A total of 62 adult patients with comminuted intraarticular distal radius fracture were randomized into 2 groups:volar plate group and external fixator group.These patients aged between 18 and 60 years had unilateral fractures,and agreed to be included in the study.Patients with a history of fracture,bilateral fracture,associated other injuries,delayed injury for more than 2 weeks,open fracture,pre-existing arthrosis or disability,psychiatric illness and pathological fracture were excluded.Patients were followed up at 6 weeks,3 months,6 months and 1 year.The assessment of pain,functional activity,range of motion and grip strength was done at each stage of follow-up.The pain and functional activities were assessed by patient rated wrist evaluation(PRWE)score and disabilities of the arm,shoulder and hand(DASH)score.Results:Patients in volar plate group had superior PRWE score and DASH score at each stage of followup.At 1 year follow-up,the mean PRWE score were 7.48 for volar plate group and 7.35 for external fixator group;while the mean DASH score was 4.65 for volar plate group and 5.61 for external fixator group.They had better flexion and extension range of movement.They also had better pronation and supination range of motion at initial follow-up,however the difference get attenuated by 1 year.Volar plate group had significantly better grip strength than external fixator group.Complication rates were higher in external fixation group.Conclusion:Fixation with variable angle volar plate results in early wrist mobilization,better range of movement,less pain and disability and early return of function.
文摘This case report describes the use of a Functional Thenar Eminence myocutaneous flap for reconstruction of volar defect of distal right thumb of a 25-year-old male who sustained a twisting injury while working. Part of bone and tendon were exposed and the tip of the distal phalanx was crushed, with bony defect.
