Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analy...Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid （VOF） methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method （BIM） have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the comrnercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.展开更多
A stencil-like volume of fluid （VOF） method is proposed for tracking free interface. A stencil on a grid cell is worked out according to the normal direction of the interface, in which only three interface positions...A stencil-like volume of fluid （VOF） method is proposed for tracking free interface. A stencil on a grid cell is worked out according to the normal direction of the interface, in which only three interface positions are possible in 2D cases, and the interface can be reconstructed by only requiring the known local volume fraction information. On the other hand, the fluid-occupying-length is defined on each side of the stencil, through which a unified fluid-occupying volume model and a unified algorithm can be obtained to solve the interface advection equation. The method is suitable for the arbitrary geometry of the grid cell, and is extendible to 3D cases. Typical numerical examples show that the current method can give ＂sharp＂ results for tracking free interface.展开更多
The PLIC/SN method that combines the second-order volume tracking method (PLIC-VOF) with the equation of surface normal (SN) vector was recently proposed (M. Sun, “Volume Tracking of Subgrid Particles,” Internationa...The PLIC/SN method that combines the second-order volume tracking method (PLIC-VOF) with the equation of surface normal (SN) vector was recently proposed (M. Sun, “Volume Tracking of Subgrid Particles,” International Journal for Numerical Methods in Fluids, Vol. 66, No. 12, 2011, pp. 1530-1554). The method is able to track the motion of a subgrid particle, but the accuracy is not as good as expected on high resolution grids for vortical flows. In this paper, a simple unsplit multidimensional advection algorithm is coupled with the equation of SN vector. The advection algorithm is formulated as the finite volume method, so that it can be used readily for both structured and unstructured grids while maintaining the exact mass conservation. The new method improves the accuracy significantly for high resolution grids. In the well-known test of the time-resolved vortex problem of T = 2, the circular interface is resolved with an accuracy better than ever using the equation of SN vector.展开更多
VOF(Volume Of Fluid)方法能够通过在欧拉网格上使用离散的体积分数域表示光滑界面,在不可混合流体的数值模拟中得到广泛应用。针对多相流仿真中的液滴曲率计算问题,开发了一种计算界面曲率的算法。首先提出了一种新的数据生成方法,在...VOF(Volume Of Fluid)方法能够通过在欧拉网格上使用离散的体积分数域表示光滑界面,在不可混合流体的数值模拟中得到广泛应用。针对多相流仿真中的液滴曲率计算问题,开发了一种计算界面曲率的算法。首先提出了一种新的数据生成方法,在液滴界面上进行随机采样,增强网格内体积分数的信息量,并调整取值范围以覆盖正负曲率。然后改进了传统的深度神经网络(DNN)模型,使其在计算曲率时保持对称性。基于VOF方法与该模型,利用目标单元及邻近单元体积分数计算曲率。最后选取最优模型并应用于Basilisk软件中,以提高计算曲率的准确性和稳定性。测试结果表明,其计算曲率时准确稳定。在计算小半径液滴曲率时,误差减小了25%至50%,并能用于液滴融合仿真,证明了其应用价值。展开更多
Gas-liquid two-phase flow in fractal porous media is pivotal for engineering applications,yet it remains challenging to be accurately characterized due to complex microstructure-flow interactions.This study establishe...Gas-liquid two-phase flow in fractal porous media is pivotal for engineering applications,yet it remains challenging to be accurately characterized due to complex microstructure-flow interactions.This study establishes a pore-scale numerical framework integratingMonte Carlo-generated fractal porousmedia with Volume of Fluid(VOF)simulations to unravel the coupling among pore distribution characterized by fractal dimension(Df),flow dynamics,and displacement efficiency.A pore-scale model based on the computed tomography(CT)microstructure of Berea sandstone is established,and the simulation results are compared with experimental data.Good agreement is found in phase distribution,breakthrough behavior,and flow path morphology,confirming the reliability of the numerical simulation method.Ten fractal porous media models with Df ranging from 1.25~1.7 were constructed using a Monte-Carlo approach.The gas-liquid two-phase flow dynamics was characterized using the VOF solver across gas injection rates of 0.05-5m/s,inwhich the time-resolved two-phase distribution patternswere systematically recorded.The results reveal that smaller fractal dimensions(Df=1.25~1.45)accelerate fingering breakthrough(peak velocity is 1.73 m/s at Df=1.45)due to a bimodal pore size distribution dominated by narrow channels.Increasing Df amplifies vorticity generation by about 3 times(eddy viscosity is 0.033 Pa⋅s at Df=1.7)through reduced interfacial curvature,while tortuosity-driven pressure differentials transition from sharp increases(0.4~6.3 Pa at Df=1.25~1.3)to inertial plateaus(4.8 Pa at Df=1.7).A nonlinear increase in equilibrium gas volume fraction(fav=0.692 at Df=1.7)emerges from residual gas saturation and turbulence-enhanced dispersion.This behavior is further modulated by flow velocity,with fav peaking at 0.72 under capillary-dominated conditions(0.05 m/s),but decreasing to 0.65 in the inertial regime(0.5 m/s).The work quantitatively links fractal topology to multiphase flow regimes,demonstrating the critical role of Df in governing preferential pathways,energy dissipation,and phase distribution.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 50679010 and 50579004.
文摘Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid （VOF） methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method （BIM） have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the comrnercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.
基金Project supported by the National Natural Science Foundation of China (No.10672097)Shanghai Leading Academic Discipline Project (No.Y0103)
文摘A stencil-like volume of fluid （VOF） method is proposed for tracking free interface. A stencil on a grid cell is worked out according to the normal direction of the interface, in which only three interface positions are possible in 2D cases, and the interface can be reconstructed by only requiring the known local volume fraction information. On the other hand, the fluid-occupying-length is defined on each side of the stencil, through which a unified fluid-occupying volume model and a unified algorithm can be obtained to solve the interface advection equation. The method is suitable for the arbitrary geometry of the grid cell, and is extendible to 3D cases. Typical numerical examples show that the current method can give ＂sharp＂ results for tracking free interface.
文摘The PLIC/SN method that combines the second-order volume tracking method (PLIC-VOF) with the equation of surface normal (SN) vector was recently proposed (M. Sun, “Volume Tracking of Subgrid Particles,” International Journal for Numerical Methods in Fluids, Vol. 66, No. 12, 2011, pp. 1530-1554). The method is able to track the motion of a subgrid particle, but the accuracy is not as good as expected on high resolution grids for vortical flows. In this paper, a simple unsplit multidimensional advection algorithm is coupled with the equation of SN vector. The advection algorithm is formulated as the finite volume method, so that it can be used readily for both structured and unstructured grids while maintaining the exact mass conservation. The new method improves the accuracy significantly for high resolution grids. In the well-known test of the time-resolved vortex problem of T = 2, the circular interface is resolved with an accuracy better than ever using the equation of SN vector.
文摘VOF(Volume Of Fluid)方法能够通过在欧拉网格上使用离散的体积分数域表示光滑界面,在不可混合流体的数值模拟中得到广泛应用。针对多相流仿真中的液滴曲率计算问题,开发了一种计算界面曲率的算法。首先提出了一种新的数据生成方法,在液滴界面上进行随机采样,增强网格内体积分数的信息量,并调整取值范围以覆盖正负曲率。然后改进了传统的深度神经网络(DNN)模型,使其在计算曲率时保持对称性。基于VOF方法与该模型,利用目标单元及邻近单元体积分数计算曲率。最后选取最优模型并应用于Basilisk软件中,以提高计算曲率的准确性和稳定性。测试结果表明,其计算曲率时准确稳定。在计算小半径液滴曲率时,误差减小了25%至50%,并能用于液滴融合仿真,证明了其应用价值。
基金funded by the National Key R&D Program of China,China(Grant No.2023YFB4005500)National Natural Science Foundation of China,China(Grant Nos.52379113 and 52379114).
文摘Gas-liquid two-phase flow in fractal porous media is pivotal for engineering applications,yet it remains challenging to be accurately characterized due to complex microstructure-flow interactions.This study establishes a pore-scale numerical framework integratingMonte Carlo-generated fractal porousmedia with Volume of Fluid(VOF)simulations to unravel the coupling among pore distribution characterized by fractal dimension(Df),flow dynamics,and displacement efficiency.A pore-scale model based on the computed tomography(CT)microstructure of Berea sandstone is established,and the simulation results are compared with experimental data.Good agreement is found in phase distribution,breakthrough behavior,and flow path morphology,confirming the reliability of the numerical simulation method.Ten fractal porous media models with Df ranging from 1.25~1.7 were constructed using a Monte-Carlo approach.The gas-liquid two-phase flow dynamics was characterized using the VOF solver across gas injection rates of 0.05-5m/s,inwhich the time-resolved two-phase distribution patternswere systematically recorded.The results reveal that smaller fractal dimensions(Df=1.25~1.45)accelerate fingering breakthrough(peak velocity is 1.73 m/s at Df=1.45)due to a bimodal pore size distribution dominated by narrow channels.Increasing Df amplifies vorticity generation by about 3 times(eddy viscosity is 0.033 Pa⋅s at Df=1.7)through reduced interfacial curvature,while tortuosity-driven pressure differentials transition from sharp increases(0.4~6.3 Pa at Df=1.25~1.3)to inertial plateaus(4.8 Pa at Df=1.7).A nonlinear increase in equilibrium gas volume fraction(fav=0.692 at Df=1.7)emerges from residual gas saturation and turbulence-enhanced dispersion.This behavior is further modulated by flow velocity,with fav peaking at 0.72 under capillary-dominated conditions(0.05 m/s),but decreasing to 0.65 in the inertial regime(0.5 m/s).The work quantitatively links fractal topology to multiphase flow regimes,demonstrating the critical role of Df in governing preferential pathways,energy dissipation,and phase distribution.
